Answers
Answer:
The picture is attached below!! Hope this helps!
The increasing order of average molecular velocity at 25 degrees Celcius is:
BrF< NO₂<HCl<H₂O<He
What is molecular velocity?It is defined whether it is normal speed, root mean square speed and most likely speed. It should be relative to the square to the square root of outright temperature.
The gas with the minimum molar mass will have the highest molecular speed.
Thus, Helium is having the lowest molar mass, therefore it will have the highest molecular velocity.
Find more information about Molecular velocity here:
brainly.com/question/1286862
Related Questions
An irreversible change would be?
A.chipping ice to flakes
B.getting a hair cut
C.condensing steam
D.boiling water
Answers
Answer:
A. Chipping ice to flakes
Explanation:
You can't reverse the ice becoming flakes. They will stay like that until they melt
When N2(g) reacts with O2(g) to form NO(g) , 181 kJ of energy are absorbed for each mole of N2(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation. Note that the answer box for the energy term is case sensitive. Use the SMALLEST INTEGER coefficients possible and put the energy term (including the units) in the last box on the appropriate side of the equation. If a box is not needed, leave it blank.
? + ? + ? ? +
?
Answers
Answer:
N2(g) + O2(g) ----->2NO(g) ΔH= 181 kJ
Explanation:
The equation of the reaction according to the question should be written with the lowest coefficient. A thermochemical reaction usually includes the enthalpy of reaction as part of the reaction equation
So we have the equation of the reaction as;
N2(g) + O2(g) ----->2NO(g) ΔH= 181 kJ
The positive enthalpy shows that heat was absorbed in the reaction
How many moles
are equal to
4.11x1023
molecules of
CO2?
Answers
Answer:
1.47
Explanation:
1) Avogadro number is: 6.022*10²³ molecules per mol;
2) if 6.022*10²³ molecules are in 1 mol, then 4.11*10²³ molecules are in
x=6.022*10²³ / 4.11*10²³=6.022/4.11≈1.47 moles.
A scientific experiment must be
O inexpensive
O repeatable
O complicated
O hard to explain
Answers
If it’s repeatable and you get the same answer constantly then it’s a good and accurate experiment
What variables do you need to calculate speed?
Answers
Answer:
distance and time
Explanation:
distance=rate x time
rate=speed
If 20 ml of a 0.5 M sodium hydroxide solution is necessary to neutralize 40 ml of an acid solution, what is the concentration of the acid?
Answers
Answer: The concentration of the acid is 0.01 moles acid/0.040 L = 0.25 moles/L = 0.25 M
Explanation:
Which of the following is evidence that
a chemical change has occurred?
a. Water bubbling when it starts to boil.
b. Detergent removing grease from a dish.
c. Sugar turning black when it burns.
d. Oil and vinegar separating in salad
dressing
Answers
Answer: c. Sugar turning black when it burns.
Explanation:
Chemical change is defined as a change in which rearrangement of atoms take place and leads to formation of new substances.
Physical change is defined as a change which leads to change in shape, size or state of the substance changes. No new substance is formed.
a) Water bubbling when it starts to boil is a physical change as it accompanies only a change in phase.
b) Detergent removing grease from a dish is a physical change as no new substance is formed.
c) Sugar turning black when it burns is a chemical change as there occurs a chemical reaction between sugar and oxygen. The oxygen in the air reacts with the sugar and the chemical bonds are broken.
d) Oil and vinegar separating in salad dressing is not a chemical change. It occurs because of difference in densities.
it's science pls help
Answers
Answer:
1.5
Explanation:
) An organic chemistry lab book gives the following solubility data for oxalic acid 9.5g/100ml water 23.7g/100ml ethanol 16.9g/100ml ether (a) A 14CL student has 40 g of oxalic acid in 1000ml of water and wishes to extracted into an organic solvent for further experiments. Which solvent should the student use for the extraction
Answers
Answer:
Ethanol
Explanation:
Solvent extraction is the process in which a compound transfers from one solvent to another owing to the difference in solubility or distribution coefficient between these two solvents(Science Direct).
We have to remember that oxalic acid will be extracted better into a solvent in which it is more soluble. From the data given; oxalic acid is more soluble in ethanol than in ether.
This simply means that ethanol is a better solvent for extracting oxalic acid from water when compared to ether.
How many square centimeters are in an area of 8.20 inch2 ? Express your answer numerically in square centimeters.
Answers
Answer:
52.9031 hope this helps:)
Explanation:
Take a close look at this diagram on the slide which form of government is represented by this diagram
Answers
Answer:
Confederation
☆
EDGE2022; Good Luck :3!!!!
The reaction between ethyl alcohol and ethyl bromide forms diethyl ether via a substitution reaction, followed by deprotonation. Identify the electrophilic and nucleophilic site of the addition reaction.
Answers
Answer:
Explanation:
According to the attached mechanism, we have a Sn1 reaction. The diethyl ether formed is because we have a nucleophilic site and an electrophilic site. Now which one is?.
If you see the mechanism below, you can see that the -OH has a lone pair of electrons. This lone pair attacks the carbon that is attached to the bromine. This attack, makes the ethyl alcohol the nucleophyle, and the ethyl bromide, which have the leaving group (The bromine) the electrophyle.
You can see the mechanism below to understand the formation of this product.
Hope this helps
Students investigate forces and how they affect objects. They use a small car and wooden blocks to carry out their investigation
They pushed the cart and blocks 10 times, using the same amount of force. Each time, they added 5 more blocks to the wagon
They measured how far the cart moves each time. They made a line graph to show their results. What will their graph show?
The distance the cart moves decreases as the number of blocks in it increases
As the number of blocks in the cart increases, the distance it moves stays the same.
The distance the cart moves is not related to the number of blocks in it
The distance the cart moves increases as the number of blocks in the cart increases
Answers
Answer:
increase the number of blocks
increase the number of students pulling the cart
increase the number of blocks and increase the number of students pulling the cart
decrease the number of blocks
decrease the number of students pulling the cart
decrease the number of blocks and decrease the number of students pulling the cart
(ANSWER CHOICES)
Explanation:
Which island is older Kauai or Maui
Answers
Answer:
Kauai
Explanation:
I look this up when I am doing math
What makes a balloon electrically charged?
Adding more air to the balloon
Placing the balloon against a wall
Rubbing the balloon against your hair
Running water over the balloon
Answers
Explanation:
rubbing it against your hair
Answer:
C
Explanation:
Hope this helps and have a great day.
Balanced Equation:
H2O2-
H2 + O2
Answers
2 H2O2 - 2 H2O+O2 - Balanced Equation and its a decomposition reaction.
Is oxygen with 10 total electrons an atom or an ion
Answers
Answer:
Since two extra electrons are added, it is denoted by O2- hence it's an ion.
Dimercaprol (HSCH2CHSHCH2OH) was developed during World War I as an antidote to arsenic-based poison gas and is used today to treat heavy-metal poisoning. It binds the toxic element and carries it out of the body. (a) If each molecule binds one arsenic (As) atom, how many atoms of As could be removed by 515 mg of dimercaprol
Answers
Answer:
2.50x10²¹ atoms
Explanation:
First we convert the given mass of dimercaprol to moles, to do so we calculate its molar mass:
Molar Mass of HSCH₂CHSHCH₂OH = (Molar Mass of C)*3 + (Molar Mass of H)*8 + (Molar Mass of S)*2 + Molar Mass of O = 124.227 g/mol515 mg equal 0.515 g
0.515 g ÷ 124.227 g/mol = 4.146 x 10⁻³ molAs one dimercaprol molecule binds to one As atom, one mol of dimercaprol reacts with one mol of As.
So we convert those 4.146 x 10⁻³ mol of As to atoms, using Avogadro's number:
4.146 x 10⁻³ mol * 6.023x10²³ atoms/mol = 2.50x10²¹ atomsA sample of gas in a cylinder as in the example in Part A has an initial volume of 56.0 L , and you have determined that it contains 1.80 moles of gas. The next day you notice that some of the gas has leaked out. The pressure and temperature remain the same, but the volume has changed to 14.0 L . How many moles of gas (n2) remain in the cylinder
Answers
Answer: The moles of gas that remain in the cylinder are 0.45
Explanation:
According to the Avogadro's law, the volume of gas is directly proportional to the number of moles of gas at same pressure and temperature. That means,
[tex]V\propto n[/tex]
or [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex]
where,
[tex]V_1[/tex] = initial volume of gas = 56.0 L
[tex]V_2[/tex] = final volume of gas = 14.0 L
[tex]n_1[/tex] = initial moles of gas = 1.80
[tex]n_2[/tex] = final moles of gas = ?
Putting the values , we get:
[tex]\frac{56.0}{1.80}=\frac{14.0}{n_2}[/tex]
[tex]n_2=0.45[/tex]
The moles of gas that remain in the cylinder are 0.45
In the comparing the structure of the earth to the structure of an apple, which part of the apple is most similar to the earth crust?
Answers
Answer:
The answer is the skin of the apple
Which food, Cheetos® or Goldfish, had more calories per gram?
Serving size of Cheetos and Goldfish- 28g
Calories of Cheetos- 130 Cal
Calories of Goldfish- 170 Cal
Answers
Answer:
goldifsh
Explanation:
why do Eastshore sculptures keep changing?
Answers
Answer:1. the junk sculpture rules say the forms have to change every two weeks or be taken clear down. 2. the weather and other people change the forms after they are built
Explanation:
Explanation:
1. The junk sculpture rules say the forms have to change every two weeks or be taken clear down.
2.The weather and other people change the forms after they are built.
I hope it's helpful!
I need the blanks filled. This is Comp chem and I need it fast.
Answers
2Al+3Pb(NO3)2—-> 2Al(NO3)3+3Pb
1Cu+2AgNO3—->1Cu(NO3)2+2Ag
1Cl2+2LiI——>2LiCl+I2
1Ca(OH)2+2HCL—->1CaCl2+2H2O
3H2+1N2——>2NH3
Balancing Equations Practice
Al(NO3)3 +
3 NH4NO3
(NH4)3PO4 → | AIPO4 +
1)
2)
AgF +
CaCl2 →
AgCl +
CaF2
3)
ZnBr2 +
Pb(NO2)2 →
Zn(NO2)2 +
PbBr2
Answers
How many moles of tin atoms are in a pure tin cup with a mass of 30.4 g ?
Answers
Answer:
ANSWER: 0.331 moles of tin
Explanation: in my working * means multiply and ^ means to the power of.
Ok BASICALLY if you have 6.02*10^23 of something you have yourself 1 mole of things. The atomic weight in the left hand corner of each element in the periodic table gives you the MOLAR MASS, which is the mass of 1 mole of that element. For example, Carbon has a molar mass of 12.011, this means it has 12.011 grams every 1 mole of carbon [C] (12.011 g/mol)
So now, how many moles are in 39.3 grams of tin? Very easy. You will find that in chemistry classes students are taught a basic formula to find the number of moles, which is:
---
Number of moles = Mass given / Molar mass
---
So in order to answer this question and find out the NUMBER OF MOLES, we need to find the MASS GIVEN - this is simply the mass given to you in the question, which is 39.3 grams of tin. We also need to know the MOLAR MASS, which is found in the left hand corner of the element. For tin [Sn] the molar mass is 118.710.
Sub both these into the formula to get:
Number of moles = 39.3 / 118.710
Number of moles = 0.331058883
We are not finished - remember to round of the lowest amount of significant figures found in the working of the question. In the working out, which was (39.3 / 118.71) the 39.3 has 3 significant figures and the 118.70 has 5 significant figures. ALWAYS TAKE THE LOWEST AMOUNT FOUND. The lowest amount is 3, so we must round this answer to 3 significant figures.
It will be: 0.331
Therefore, 0.331 moles of tin atoms are in a pure tin cup with a mass of 39.3.
Hope i helped and good luck!
How many grams of KCl are produced if 25g of KCIO3 decompose?
2KCIO3
2KCI
+
302
Answers
Answer:
15 g
Explanation:
The reaction that takes place is:
2KCIO₃ → 2KCI + 3O₂First we convert 25 g of KCIO₃ to moles, using its molar mass:
25 g ÷ 122.55 g/mol = 0.204 mol KCIO₃Then we convert KCIO₃ moles to KCl moles, using the stoichiometric coefficients:
0.204 mol KCIO₃ * [tex]\frac{2molKCl}{2molKClO_3}[/tex] = 0.204 mol KClFinally we convert KCl moles to grams, using the molar mass of KCl:
0.204 mol KCl * 74.55 g/mol = 15.2 gGold forms a substitutional solid solution with silver. Compute the number of gold atoms per cubic centimeter for a silver-gold alloy that contains 10 wt% Au and 90 wt% Ag. The densities of pure gold and silver are 19.32 and 10.49 g/cm3, respectively. Weight of Au is 196.97 g/mol.
Answers
Answer:
See answer below
Explanation:
In order to do this, we need to use the following expression:
N'Au = C'Au * NAu (1)
Where:
N'Au: number of gold atoms per cubic centimeter.
C'Au = Atomic percentage of the Gold in the gold silver alloy.
NAu = Number of gold atoms
However, we do not have C'Au and neither NAu. We need to calculate those first.
To get the percentage of the gold we use the following expression:
C'Au = (CAu * MMAg) / (CAu * MMAg + CAg * MMAu) (2)
Where:
CAu and CAg: Weight percentage of the gold and the silve
MMAu and MMag: Atomic weights of the gold and the silver
We already have that data, so, replacing all the given data into (2) we have:
C'Au = (0.10 * 107.87) / (0.10 * 107.87 + 0.90 * 196.97)
C'Au = 10.787 / 188.06
C'Au = 0.0574 (or 5.74%)
We have C'Au, now we need to find the number of atoms of gold in the gold silver alloy. In order to do that, we use the following expression:
NAu = N * ρ / MMAu (3)
N is the avogadro's number which is 6.02x10²³ atoms. So replacing this value, the density and molecular weight of gold, the atoms are:
NAu = 6.02x10²³ * 19.32 / 196.97
NAu = 5.9x10²² atoms/cm³
Now that we have all the required data from (1), we just need to replace the obtained values:
N'Au = 5.9x10²² * 0.0574
N'Au = 3.39x10²¹ atoms/cm³
Hope this helps
What is the molar mass of AuCl3?
Answers
Explanation:
Molar mass is the the mass of one mole of a substance and is expressed in g/mol. Gold atomic mass is 196.96657, chlorine has 35.453. Hence, molar mass of AuCl3= atomic number of Gold + atomic mass of chlorine × (number of atoms of chlorine in AuCl3). Molar mass of AuCl3 = 196.96657 + (35.453 × 3).
Each element has a unique name. How else can
an element be represented?
A. by its mass
B. by its state of matter
C. by its chemical symbol
D. by an identification number
Answers
Answer:
C. by its chemical Symbol
Hope this helps!
The table shows the temperature and pressure of five-liter samples of four different gases. Which two gas samples do not have the
same number of molecules?
Answers
Answer:He2 & O2
Explanation:
Answer:
Answer:A
Explanation: