Criteria for moving a particular app to the cloud by CBI can be divided into three major categories. The three criteria are listed below:
Cost efficiencySecurityLegal aspectsLet's dive deeper into the details below.
Cost efficiency: Criteria for CBI should consider the economic gains of moving an app to the cloud. Cloud migration enables businesses to cut expenses that would otherwise be incurred in the acquisition and installation of hardware equipment. Furthermore, cloud solutions can aid in the reduction of hardware-related expenditures, such as maintenance and upgrades.
Security: Before moving an app to the cloud, the security considerations must be taken into account. A company's reputation can be severely harmed if its data is breached. As a result, an analysis of cloud providers should be conducted to ensure that the company chooses the most secure cloud provider. In this scenario, the CBI should decide whether the cloud provider's security measures comply with the business's existing security and privacy policies and regulations.
Legal aspects: Moving an app to the cloud can be a difficult process in terms of the legality. CBI must ensure that the cloud provider's service level agreement (SLA) meets the company's requirements in terms of data ownership, data protection, and data security. Furthermore, the CBI should ensure that any legal and regulatory requirements are met by the service provider.
These are the three criteria that are essential to move a particular app to the cloud by CBI.
Learn more about Cloud migration.
brainly.com/question/30122527
#SPJ11
in the performance tab of task manager, what field displays the amount of memory currently required by the os kernel and drivers that can be written to virtual memory?
The field in the Performance tab of Task Manager that displays the amount of memory currently required by the OS kernel and drivers that can be written to virtual memory is the "Commit Charge (K)" field.
In other words, Commit Charge is a measure of how much memory has been allocated to running processes and the system kernel, and how much memory is still available for new processes.
It includes both physical memory (RAM) and virtual memory (swap space) that has been reserved for use by the operating system.
Learn more about Commit Charge:
https://brainly.com/question/29107303
#SPJ11
different computing systems could have conflicting optimization goals. describe how the following pairs of scheduling criteria could have conflicting goals. (6 pts) cpu utilization and response time average turnaround time and maximum waiting time i/o device utilization and cpu utilization.
CPU utilization and response time can have conflicting goals because high CPU utilization implies keeping the CPU busy with processes, while low response time implies quick turnaround for processes, which can lead to processes being starved of CPU resources.
Various computer systems may have competing optimization objectives. The following pairs of scheduling criteria may have competing objectives:
1. CPU usage and reaction time:
When a CPU is heavily used, reaction time tends to increase. It might be difficult to strike a balance between high CPU use and low reaction time since high CPU utilization implies a speedy response and low CPU utilization implies a lengthy response. As a result, the CPU usage optimization target may clash with the reaction time optimization goal.
2. Both average turnaround time and maximum waiting time relate to the amount of time it takes for a process in a computer system to finish. The average turnaround time seeks to reduce the time it takes the system to perform all operations, whereas the maximum waiting time seeks to ensure that no process must wait for a lengthy amount of time.
These two criteria contradict each other since reducing average turnaround time may require a few processes to wait for an extended period, increasing in maximum waiting time.
3. I/O device usage and CPU utilization: There is a conflict between these two optimization goals since the CPU and I/O devices compete for processing resources in general. Increased I/O device use, for example, by processing more I/O requests, might result in lower CPU utilization since the CPU must wait for the I/O requests to be processed.
As a result, there is a trade-off between increasing I/O device utilization and reducing CPU utilization.
Learn more about CPU utilization:
https://brainly.com/question/14400616
#SPJ11
how many bits are required to address a 1m x 8 main memory if a) main memory is byte-addressable? b) main memory is word-addressable?
a) If the main memory is byte-addressable, each byte needs an address, thus the number of addresses required is equal to the size of the main memory.
Therefore, for a 1M x 8 main memory, the number of bytes is 1M, which equals 220 bytes. Each byte requires an address, so the number of bits required to address the memory is equal to the log base 2 of 220, which is 20 bits.
b) If the main memory is word-addressable, then each word in the memory will need an address, and the size of a word will depend on the machine.
For instance, if the word size is 16 bits, then the memory size would be 512K x 16 bits. Then the number of words will be 512K, which is equal to 219. Since each word requires an address, the number of bits required to address the memory is equal to the log base 2 of 219, which is 19 bits.
for more such questions on byte
https://brainly.com/question/29096787
#SPJ11
which networking model is based on peer-to-peer networking? answer workgroup client-server none standalone
The networking model that is based on peer-to-peer networking is the workgroup model.
In workgroup model, each device acts as both a client and a server, allowing direct communication between computers on the same network. The computers are not dependent on a centralized server and the workload can be shared among them.
This model can be used for both small-scale and large-scale networking. For example, it can be used in home networks, or it can be used in large corporate networks.
The workgroup model has some advantages over the client-server model. For example, it is less expensive to implement as it does not require a dedicated server and it is more reliable as it does not have a single point of failure. Additionally, it is easier to configure, maintain and upgrade.
Learn more about networking here:
https://brainly.com/question/29934433
#SPJ11
you are at a customer's home, and you are asking the customer whether the problem is intermittent or constant. which steps are you using from the six-step troubleshooting process?
Asking the customer whether the problem is intermittent or constant is part of the first step in the six-step troubleshooting process, which is to identify the problem.
The six steps of the troubleshooting process are:
Identify the problem: This step involves gathering information about the problem, such as its symptoms and when it occurs, in order to better understand and define the problem.
Establish a theory of probable cause: Based on the information gathered in step 1, this step involves developing a theory or hypothesis about the most likely cause of the problem.
Test the theory: In this step, the theory developed in step 2 is tested to determine whether it is correct.
Establish a plan of action and implement the solution: Based on the results of the testing in step 3, a plan of action is developed to implement the solution to the problem.
Verify full system functionality: Once the solution has been implemented, the system is tested to ensure that the problem has been resolved and that the system is functioning correctly.
Document the findings, actions, and outcomes: This step involves documenting the problem, the steps taken to troubleshoot and solve it, and the final outcome.
Therefore, asking the customer whether the problem is intermittent or constant falls under the first step of identifying the problem, which is a crucial step in the troubleshooting process as it helps to define the scope and nature of the problem.
Learn more about troubleshooting here brainly.com/question/30048504
#SPJ4
What is the resistance of a circuit with 20V and 2A?
The resistance of the circuit is 10 ohms.The resistance of a circuit can be calculated using Ohm's law, which states that resistance is equal to the ratio of voltage to current.
Therefore, if the circuit has a voltage of 20 volts and a current of 2 amperes, the resistance can be calculated as:
Resistance = Voltage / Current
Resistance = 20V / 2A
Resistance = 10 ohms
Therefore, the resistance of the circuit is 10 ohms. It is important to note that resistance is a measure of the opposition to the flow of electric current in a circuit and is typically measured in ohms (Ω). Knowing the resistance of a circuit is crucial in designing and analyzing electrical circuits, as well as in troubleshooting circuit problems.
Find out more about resistance
brainly.com/question/24076294
#SPJ4
write a function named times ten. the function should accept an argument and display the product of its argument * 10.
HTML Function to display the product of an argument times tenA function named timesTen should accept an argument and display the product of its argument * 10. is times_ten(5)
An example of a function named times_ten that multiplies its input argument by 10 and displays the result:
def times_ten(x):
result = x * 10
print(result)
This will output 50, which is the product of 5 and 10.
So, when you call times_ten(5), the function multiplies 5 by 10 to get 50, and then displays that value to the console. If you were to call times_ten(7), for example, the function would multiply 7 by 10 to get 70 and display that value to the console.
Learn more about writing functions in Python:https://brainly.com/question/25755578
#SPJ11
Before you can open and edit a compressed file, you need to zip it.a. Trueb. False
The statement "Before you can open and edit a compressed file, you need to zip it" is false because before you can open and edit a compressed file, you need to unzip it.
A compressed file is a file that has been reduced in size using compression software or algorithms, such as .zip or .rar. When a file is compressed, it is stored in a format that takes up less space, making it easier to store and transfer. However, to access the contents of a compressed file, you need to decompress or unzip it first, which expands the file back to its original size and format.
You can learn more about compressed file at
https://brainly.com/question/30055235
#SPJ11
write a recursive method that takes two strings str and forbidden and removes all characters from the forbidden string from str.
The following recursive method takes two strings str and forbidden as parameters, and removes all characters from the forbidden string from str. If the string str is empty, the method returns the empty string. Otherwise, the method checks if the first character of str is included in the string forbidden.
If it is, the method returns a new string which is a concatenation of the result of calling the method on the rest of str (all characters except the first one) and the rest of the forbidden string. Otherwise, the method returns a new string which is a concatenation of the first character of str, and the result of calling the method on the rest of str.
Here is the code:
String remove characters(String str, String forbidden)
{
if (str.length() == 0) {
return "";
} else if (forbidden.contains(String.valueOf(str.charAt(0)))) {
return remove characters(str.substring(1), forbidden);
} else {
return str.charAt(0) + remove characters(str.substring(1), forbidden);
}
}
You can learn more about recursive method at: brainly.com/question/29238957
#SPJ11
traits, skills, knowledge areas, or attributes that are required for successful job performance are known as
Traits, skills, knowledge areas, or attributes that are required for successful job performance are commonly known as job competencies or simply competencies.
These competencies are the measurable or observable knowledge, skills, abilities, behaviors, and personal characteristics that are necessary for effective job performance in a particular role or occupation. Competencies may be general or specific, and they may vary depending on the industry, organization, or job role. Examples of competencies may include communication skills, problem-solving ability, technical knowledge, leadership, teamwork, adaptability, and customer service orientation.
Job performance refers to how an individual carries out their duties in their position of employment and involves an evaluation of their attendance, attitudes, effort, knowledge, behaviors, and abilities.
Learn more about job performance: https://brainly.com/question/30009653
#SPJ11
the public members of a class must be declared before the private members. group of answer choices true false
True. According to the C++ language standard, public members of a class must be declared before any private members. This allows the compiler to check that any code attempting to access private members of a class is within the same class, or a friend class.
In C++, classes are user-defined data types that allow grouping related data and functions into a single unit. Public members of a class are accessible from outside the class, while private members are only accessible from within the class.
Therefore, by declaring public members first, the compiler can ensure that any code attempting to access private members of the class is within the same class or a friend class.
In Java, the statement "public members of a class must be declared before the private members" is false. Members can be declared in any order in a Java class.
In the Java language, accessibility modifiers are keywords used to specify the accessibility or scope of a class, method, or variable. Public, private, and protected are the three most commonly used accessibility modifiers in Java. Private members are only accessible within the class in which they are declared.
Public members are accessible throughout the project or application. Protected members are accessible only within the package or sub-classes. The ordering of the members of a Java class has no bearing on their accessibility.
The decision to declare a member as public, private, or protected should be based on the program's requirements. The accessibility of the member should be restricted to the narrowest possible scope in order to avoid unintended data manipulation or interference.
Java does not impose any limitations on the order in which members of a class are declared. As a result, there is no requirement that public members be declared before private members.
When a class is compiled, all of its members are compiled in the order they are listed in the file. It is also good coding practice to separate class members by scope, with private members listed first, followed by protected members, and then public members.
For more such questions on C++
https://brainly.com/question/28959658
#SPJ11
The arguments in a module call and the parameters listed in the module header must be of compatible data types. - True - False.
The given statement "The arguments in a module call and the parameters listed in the module header must be of compatible data types" is true because the arguments passed in a module call should match the data types of the parameters listed in the module header. .
What is a module header?The module header is a component at the start of each Python file that gives vital information about the file's contents. The module header is made consisting of a docstring that describes what the module does and may also include authorship information.
The stated statement "The arguments in a module call and the parameters listed in the module header must be of compatible data types" is correct. The parameters of a function are the variables that the function receives as input. Arguments, on the other hand, are the values passed to the function when it is called. The data type of the argument when calling a function should be the same as the data type of the relevant parameter stated in the function header.
Learn more about modules in python:
https://brainly.com/question/28379867
#SPJ11
The operand is at the memory location whose address is the sum of a register and a constant in the instruction. What is PC-relative addressing?
PC-relative addressing is a type of memory addressing that specifies the memory location of an operand relative to the address of the next instruction to be executed. In other words, the operand's address is calculated by adding a constant value to the Program Counter (PC) register, which stores the address of the next instruction to be executed.
The PC-relative addressing mode is commonly used in computer architectures with a fixed instruction length. The constant value is typically encoded as a signed integer and can be positive or negative. The relative address is added to the current value of the PC register to obtain the final address of the operand.
A PC-relative address is generated by appending a signed 12-bit value to the address of the instruction referencing it. To generate a 32-bit offset, the 12-bit value is moved left by two bits and sign-extended to the full 32 bits. The operand's address is then calculated by adding the offset to the instruction's address.
Since the memory address is unknown at the time of compilation, a PC-relative addressing strategy is preferable. This approach also makes better use of memory since relative addresses may be stated with fewer bits than absolute addresses.
Learn more about relative addressing:
https://brainly.com/question/30896447
#SPJ11
you are new in a lab and your supervisor asks you to make 1l of 1x buffer. you find a 10x version of that buffer. how many ml of the 10x do you need to make up 1l of 1x? how much water would you add this volume of 10x to in order to make the 1l?
The requirement is to make 1L of 1X buffer using a 10X version of that buffer. The number of ml of 10X required to make up 1L of 1X and the amount of water required to make up the volume of the 10X is to be determined.
A buffer is a solution that is used to maintain the pH of a solution. The ratio of 10X to 1X is 1:10. Therefore, if you have a 10X buffer, you will need to dilute it ten times to make a 1X buffer. So, you'll need to use 100 ml of the 10X buffer to make up 1L of 1X buffer. The required volume of 10X is 100 ml.
To make up 1L of 1X, you'll need to add enough water to the 10X to make a total volume of 1L. So, you'd add 900 ml of water to the 100 ml of the 10X buffer to make up 1L of 1X buffer.
Therefore, to make up 1L of 1X buffer using a 10X version of that buffer, 100 ml of 10X buffer would be required, and 900 ml of water would be required to make up the volume of the 10X.
For such more question on volume
https://brainly.com/question/20226860
#SPJ11
what types of sources are available through the jerry falwell library? how can you use the library to locate sources for your inquiry project?
The Jerry Falwell Library provides access to a variety of sources, including books, scholarly articles, databases, e-books, media, and more. The example of the project is:
Journals and databasesE-booksPrint booksThe library provides access to a wide range of scholarly journals and databases, which can be searched by topic, author, or keyword.The library has a large collection of e-books, which can be accessed online from any device. To locate sources for your inquiry project, you can use the library's search tools, which allow you to search across multiple sources at once.
Internet traffic entering, leaving, or moving within a private network is restricted by a firewall, a computer network security device. By selectively blocking or permitting data packets, this software, or dedicated hardware-software device, performs its purpose.
Learn more about databases: https://brainly.com/question/518894
#SPJ11
technological changes that influence nursing practice and health care include which of the following? select all that apply. use of robots to deliver meal trays, make rounds, and take vital signs tailoring treatment plans for malignant tumors from genetic-testing results using genomic medicine to treat a large population of people performing surgery using robots, which increases surgical costs for the patient
The employment of robots to carry meal trays, make rounds, and collect vital signs is one example of how technology is influencing nursing practice and health care. Another example is the ability to personalize treatment strategies for malignant tumors based on the findings of genetic testing.
What is a vital sign?The body's essential processes are gauged by vital signs. Your temperature, heart rate, respiration rate, blood pressure, and oxygen saturation are a few of these. The term "vital signs" refers to a collection of the four to six most important medical indicators that show the health of the body's vital processes. These measurements are taken to assess a person's overall physical health, provide information about potential diseases, and demonstrate a person's progress towards recovery. Vital signs are measurements of the body's most basic functions. A living organism's vital signs are an objective gauge of its core physiological processes. Since their measurement and assessment constitute the crucial initial stage in any clinical evaluation, they have been given the moniker "vital."To learn more about vital signs, refer to:
https://brainly.com/question/970323
james wants to use a waterfall approach for a project, and lucia would like to use her scrum team. what is a disadvantage of using a waterfall approach?
The disadvantage of using a waterfall approach is that it is difficult to make changes to the project once it is started and a waterfall approach for a project is that it is challenging to make changes once it is started.
Changes must be made at the beginning of the project, and it is challenging to change course once the project has started. The waterfall is rigid and inflexible, and the next stage cannot begin until the current stage is completed, making it difficult to adjust the course of the project to reflect any new developments that may have arisen.
The waterfall approach is best suited for well-defined projects where the requirements are well-known and unlikely to change. Otherwise, a more agile approach, such as Scrum, may be more appropriate.
You can learn more about waterfall approach at: brainly.com/question/29937266
#SPJ11
what significant cloud coverage is reported by this pilot report? kmob ua/ov 15nw mob 1340z/sk ovc-top025 / ovc045-top090
According to the pilot report, the significant cloud coverage is overcast, with cloud tops at 2500 feet and 4500 feet.
The pilot report is written in a specific format that provides information about weather conditions and other factors relevant to aviation. In this report, the cloud coverage is described using the abbreviations "ovc-top025" and "ovc045-top090," which indicate that the clouds are overcast and that their tops are at 2500 feet and 4500 feet, respectively.
Overcast conditions mean that the sky is completely covered by clouds, and the sun is not visible.
Learn more about cloud coverage:
https://brainly.com/question/22789805
#SPJ11
help i don't know the answer
A test bed is an environment with all the necessary hardware and software to test a software system or component.
What is meant by hardware and software?The term "hardware" describes the actual, outward-facing parts of the system, such as the display, CPU, keyboard, and mouse. Contrarily, software refers to a set of instructions that allow the hardware to carry out a certain set of activities.RAM, ROM, Printer, Monitor, Mouse, Hard Drive, and other items are some examples of hardware. Software examples include, MySQL, Microsoft Word, Excel, PowerPoint, Notepad, Photoshop, and more.System software, utility software, and application software are some of the numerous kinds of software that can be used with computers.Office suites, graphics software, databases, database management software, web browsers, word processors, software development tools, image editors, and communication platforms are some examples of contemporary applications. software for a system.To learn more about hardware and software, refer to:
https://brainly.com/question/23004660
when an administrator needs to update nano server, what website can they use to download the updates?
When an administrator needs to update Nano Server, they can use Microsoft's Windows Insider Preview Server website to download the updates. This website is a secure Microsoft download site that allows administrators to get the most recent updates for Nano Server.
To update Nano Server, administrators should first download the updates from the website, then extract the files to the local computer. After that, the administrator can deploy the Nano Server update package to the appropriate servers. The administrator can also choose to deploy the update package remotely.
Finally, the administrator can initiate the update process by running the Nano Server Update utility, which is available in the Windows Server 2016 installation media. The utility will then scan the computer and display a list of available updates. The administrator can then select the appropriate update packages and complete the update process.
You can learn more about Nano Server at: brainly.com/question/13063232
#SPJ11
in order of opperations, parentheseses indicate that the operations inside should be done ________ other steps
Answer:
In order of operations, parentheses indicate that the operations inside should be done first before any other steps.
Explanation:
FIRST
how to get your new iphone to be setup like your old one when you don't have access to your old phone
To set up a new iPhone like the old one, when you don't have access to the old phone, you can use the "Restore from iCloud Backup" feature.
Here are the steps to follow:
Step 1: Turn on your new iPhone and follow the prompts until you reach the "Apps & Data" screen.
Step 2: Tap "Restore from iCloud Backup" and sign in to your iCloud account with your Apple ID and password.
Step 3: Choose the most recent backup from the list of backups available to you. If you have an encrypted backup, you'll need to enter the password.
Step 4: Wait for the restore process to complete. This may take a while, depending on the size of your backup.
Step 5: Once the restore process is complete, your new iPhone will be set up like the old one. All your apps, photos, messages, and other data will be transferred to the new device.
Please note that you'll need to have access to a Wi-Fi network during the restore process, as it requires a stable and reliable internet connection.
Learn more about Restore from iCloud Backup here:
https://brainly.com/question/30732313
#SPJ11
Lynn has always wanted to work as an urban farm technician. After speaking to a friend who is already on the Agribusiness Systems career pathway, she realizes that she will need to develop many skills beyond just understanding farming basics to be successful. What is one skill that Lynn will need to develop?
Lynn will need to master business management abilities in order to succeed as an urban farm technician. She will need to comprehend farming economics, such as sales and marketing.
What do agricultural technical abilities entail?Developing tech-based abilities in areas like irrigation, pesticide use, and enhancing cultivation, harvest, storage, and transport systems are all part of this. This also alludes to agricultural specialists embracing technology advancement.
What is the monthly pay for a BSc in agriculture in India?The income for a BSc in agriculture might range from INR 2.5 to 6 LPA. The wage is significantly influenced by a number of important elements, including education, abilities, experience, and professional position. You can expect to make between INR 4-6 with two to three years of expertise in the field.
To know more about technician visit:-
https://brainly.com/question/19161047
#SPJ1
if the memory register for a particular computer is 32 bits wide, how much memory can this computer support?
If the memory register for a particular computer is 32 bits wide, then the maximum amount of memory that can be supported is 2^32 bits or 4 gigabytes (GB) of memory.
This is because a 32-bit register can represent 2^32 unique memory addresses, each of which can hold a single byte (8 bits) of data. So, the total amount of memory that can be addressed by a 32-bit register is 2^32 bytes, which is equivalent to 4 GB. Note that this assumes that the computer's architecture and operating system support a 32-bit memory address space.
The address conveyed to the memory unit is handled by the memory address register, and this may be done either by utilizing a bus technique (as we have done in our design) or by declaring the memory's direct input.
Learn more about memory register: https://brainly.com/question/12996770
#SPJ11
what is the audience segmentation database called that we looked at in the lecture? group of answer choices criteria dma clarity target claritas prizm clarion color
Answer:
Claritas Prizm.
Explanation:
Use ChatGPT
Volatile memory loses its contents when power is removeda. Trueb. False
The given statement "volatile memory loses its contents when power is removed" is true becasue when power is removed, volatile memory loses its contents.
Volatile memory refers to computer memory that requires power to maintain its stored data. When power is removed, volatile memory loses its contents immediately. Examples of volatile memory include RAM (Random Access Memory) and cache memory. In contrast, non-volatile memory such as ROM (Read-Only Memory) and hard disk drives retain their data even when power is turned off." is true becasue
You can learn more about Volatile memory at
https://brainly.com/question/26551765
#SPJ11
2. suppose that you are storing a collection of items in a partially-filled array. you will declare the array and perhaps a constant to indicate the array's size. what else must you keep track of?
The array will be declared, along with maybe a constant to denote the array's size. Do you have to keep track of how much of the array is being used right now?
What is meant by array?For utilities, enterprises, small businesses, and homes, Array Technologies, Inc. is the top U.S.-based solar producer of clever, economical, dependable, and strong solar tracking and solar racking solutions. Institutional shareholders, 1.03% insiders of Array Technologies, and 0.00% retail investors collectively own 100.97% of Array Technologies (NASDAQ: ARRY). With 15.96M shares, or 10.60% of the firm, Blackrock Inc. is the largest individual shareholder in Array Technologies.An array is a sort of data structure that can be used to hold a fixed-size collection of elements with the same data type. An array is a container for a collection of data, although it is frequently more useful to think of an array as a collection of variables of the same type.To learn more about array, refer to:
https://brainly.com/question/28565733
true/false: when a class contains a pointer to dynamically allocated memory, it a good idea to have the class overload the assignment operator.
True: When a class contains a pointer to dynamically allocated memory, it is a good idea to have the class overload the assignment operator.
This is due to the fact that if the class's default assignment operator is used, it can result in a shallow copy of the pointer to the new object, causing both objects to point to the same memory location. This can lead to issues such as memory leaks, double deletions, and other issues.
Overloading the assignment operator allows the programmer to define the behavior of how objects are copied when they are assigned. The new object is created with its own copy of the data when the operator is overloaded. In this way, it eliminates the possibility of two objects sharing the same memory location, which might be overwritten or deleted in another area of the program.
To learn more about Pointer: https://brainly.com/question/20553711
#SPJ11
to avoid confusion, each component in the wbs needs to have a unique name and a unique number. group of answer choices false true
The statement "to avoid confusion, each component in the WBS needs to have a unique name and a unique number" is TRUE.
WBS stands for Work Breakdown Structure. It is a useful project management tool that helps to break down the project's work into smaller, more manageable components, making it easier to manage, monitor, and control. In WBS, each component must have a unique name and number to avoid confusion. Because it specifies the project's complete scope, a WBS aids in defining project objectives and establishing the project's critical path. A WBS also facilitates the project manager's communication with the project team and stakeholders, ensuring that everyone is aware of the project's progress.
Learn more about WBS here:
brainly.com/question/14530580
#SPJ11
Sticky keys enable you to press keyboard shortcuts one key at a time instead of simultaneously.a. Trueb. False
The statement "Sticky keys enable you to press keyboard shortcuts one key at a time instead of simultaneously" is true becasue sticky keys is an accessibility feature in Windows that helps users who have difficulty holding down multiple keys at once.
When Sticky Keys is turned on, you can press keyboard shortcuts one key at a time instead of simultaneously. For example, if you want to use CTRL+ALT+DEL to open the Task Manager, you can press and release each key in sequence instead of holding them down together. This feature can make it easier for users with physical disabilities to use the keyboard and access certain functions on their computer.
You can learn more about keyboard shortcuts at
https://brainly.com/question/28959274
#SPJ11