Let f (x, y) = x^2 y + y^3- 3xy. Determine all four partialsecond derivatives f and check that the mixed second derivativesare equal.

Answer:

c. The value of n is equal to the exponent on the binomial.

Step-by-step explanation:

In the binomial theorem, the expression is of the form (a + b)^n, where a and b are constants and n is a non-negative integer, which represents the degree or the exponent of the binomial. The binomial theorem provides a formula for expanding this expression into a sum of terms involving powers of a and b, and the coefficients of these terms are given by the binomial coefficients. Therefore, the value of n is a crucial part of the binomial theorem and is equal to the exponent on the binomial.

The team can bring 25 players to the tournament. The decision of how to allocate funds should be based on the team's goals and priorities.

To determine the number of players the team can bring to the tournament, we need to first subtract the cost of the bus rental from the total amount raised. This will give us the amount of money available for meals and other expenses.

$2303 - $765.50 = $1537.50

We know that the team budgeted $61.50 per player for meals. To find the number of players the team can bring, we can divide the total amount available for meals by the amount budgeted per player:

$1537.50 ÷ $61.50 = 25

It's important to note that this calculation assumes that all of the money raised will be spent on bus rentals and meals. If there are other expenses associated with the tournament (such as registration fees, equipment costs, or accommodations), these would need to be factored into the budget as well.

Additionally, it's possible that the team may choose to allocate funds differently based on their priorities and needs. For example, if the team values having a larger roster over more expensive meals, they may choose to budget less per player for meals and bring more players to the tournament.

To learn more about tournament

https://brainly.com/question/18756870

#SPJ4

We are not given the angle of B but we can still construct ∠P. Here are the steps.

1) Draw a straight line - this has been completed.

2) Place your compass on point X and extend the compass and draw and arc cutting Line XY at point C.

3) Now take the compass and manually measure on the compas the distance between the two line segments on angle B.

4) without adjusting the compass on point C and draw an arc cutting the arc ealier created.

5) now place your ruler on point x and draw a Straightline from there throught the intersection z.

Now ∠P ≅ ∠B

See the attached.

Learn more about construction:
https://brainly.com/question/19029964?
#SPJ1

The requried, to convert a histogram to a line chart, the first step would be to calculate the cumulative frequency of the data.

The cumulative frequency is the running total of the frequency of each interval in the histogram. To calculate the cumulative frequency, we initiate with the frequency of the first interval, then add the frequency of the second interval to the frequency of the first interval, and so on, until we reach the end of the data.

Once we have calculated the cumulative frequency, we can plot it on a line chart. The x-axis of the line chart will represent the intervals of the histogram, and the y-axis will represent the cumulative frequency.

Learn more about histograms here:

https://brainly.com/question/30354484

#SPJ1

The probability of getting approximately 5 heads (that is, exactly 4 or 5 or 6 heads) in 10 coin flips is 0.656 or about 65.6%.

The probability of approximately 5 heads in 10 coin flips can be calculated using the binomial distribution formula. This formula states that the probability of getting exactly k successes (in this case, heads) in n independent trials (coin flips) with a probability p of success on each trial (0.5 for a fair coin) is:

P(k successes) = (n choose k) * p^k * (1-p)^(n-k)

Where "n choose k" is the binomial coefficient, which represents the number of ways to choose k items from a set of n items (in this case, the number of ways to get k heads in n coin flips).

For this problem, we want to find the probability of getting either exactly 4, 5, or 6 heads in 10 coin flips. So we need to calculate the probability of each of these outcomes separately and then add them together:

P(4 heads) = (10 choose 4) * 0.5^4 * 0.5^6 = 0.205

P(5 heads) = (10 choose 5) * 0.5^5 * 0.5^5 = 0.246

P(6 heads) = (10 choose 6) * 0.5^6 * 0.5^4 = 0.205

The total probability of approximately 5 heads is the sum of these probabilities:

P(4 or 5 or 6 heads) = P(4 heads) + P(5 heads) + P(6 heads) = 0.656

Learn more about binomial distribution here:

brainly.com/question/31197941

#SPJ11

Answer:

area - 55.39in²

circumference - 26.38in

Step-by-step explanation:

area = pi*radius²

circumference = pi*diameter

The supports meet the safety requirements, and the correct answer is option A: "Yes, because 2.75 + 15 > 15.25."

To determine if the triangular support structures meet the safety requirements, we need to check if the Pythagorean theorem is satisfied, which states that in a right triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the other two sides.

So, let's calculate:

2.75² + 15² = 228.5625

15.25² = 232.5625

Since 228.5625 is less than 232.5625, the first option "Yes, because 2.752 + 152 = 15.252" is incorrect.

Also, we need to make sure that the sum of any two sides of the triangle is greater than the third side to satisfy the triangle inequality theorem. Let's check:

2.75 + 15 = 17.75 (greater than 15.25)

2.75 + 15.25 = 18 (greater than 15)

15 + 15.25 = 30.25 (greater than 2.75)

Therefore, the supports meet the safety requirements, and the correct answer is option A: "Yes, because 2.75 + 15 > 15.25."

Learn more about inequality theorem.

https://brainly.com/question/30174554

#SPJ4

Full Question ;

ABC A carpenter is assembling triangular support structures for a deck. The supports need to include a perfect right angle in order to be structurally safe. If the side lengths are 2.75 feet. 15 feet. and 15 25 feer do the structures meet the safety requirements? O A Yes, because 2.752 + 152 = 15.252. Yes, because 2.75 + 15 > 15.25. O C No, because (2.75 + 15)? + 15.252 O D. No, because 2.75 + 15 = 15.25. ©2022 Illuminate Education TM, Inc. hp esc Ce 女 # $ & 1 4. 7 8. 9. 00

The solutions to the quadratic equation x² + 4x = −1 are -3.7, -0.3.

The quadratic formula is expressed as:

x = (-b±√(b² - 4ac)) / (2a)

Given the quadratic equation in the question:

x² + 4x = −1

Rewrite in standard form:

x² + 4x + 1 = 0

Compared to the standard form ax² + bx + c = 0

a = 1

b = 4

c = 1

Plug these into the quadratic formula and solve for x.

x = (-b±√(b² - 4ac)) / (2a)

x = (-4 ±√( 4² - ( 4×1×1)) / (2×1)

x = (-4 ±√( 16 - 4)) / 2

x = (-4 ± 2√3 ) / 2

x = -2 ± √3

Hence:

x = -2 - √3 and x = -2 + √3

x = -3.7 and x = -0.3

Therefore, the solutions are x equal  -3.7, -0.3.

Learn more about quadratic formula here: brainly.com/question/1863222

#SPJ1

D represents the hypothesis that the population mean (μ) is greater than or equal to 1000, while E represents the hypothesis that the population mean is less than 1000.

In hypothesis testing, D and E typically represent the null hypothesis (H0) and alternative hypothesis (Ha) respectively. The null hypothesis (D) assumes that the population mean (μ) is greater than or equal to 1000, while the alternative hypothesis (E) assumes that the population mean is less than 1000.

These hypotheses are used to make decisions about the population based on sample data. In this context, options (a) and (b) are not applicable as they refer to H(a) and H(0) which are not commonly used notations in hypothesis testing.

Option (c) is also incorrect as D and E do not represent Type I and Type II errors, which are associated with the decisions made based on the hypothesis test results.

Learn more about the population mean here:-  brainly.com/question/19538277

#SPJ11

For the series 3 + 3/3 + 3/3^2 + 3/3^3 + ..., we can see that it is a geometric series with first term a = 3 and common ratio r = 1/3.

The formula for the partial sum of a geometric series is:

Sn = a(1 - r^n) / (1 - r)

where Sn is the sum of the first n terms.

Plugging in our values of a = 3 and r = 1/3, we get:

Sn = 3(1 - (1/3)^n) / (1 - 1/3)

Simplifying this expression, we get:

Sn = 9/2 - (3/2)(1/3)^n

To find the sum of the series, we need to find the limit of Sn as n approaches infinity, since the series converges:

lim n→∞ Sn = lim n→∞ [9/2 - (3/2)(1/3)^n]

The second term approaches zero as n approaches infinity, so we are left with:

Sum = lim n→∞ Sn = 9/2

Therefore, the sum of the series is 9/2 if it converges.

To learn more about convergence visit;

brainly.com/question/15415793

#SPJ11

Answer:

The y-intercept is 3.

Step-by-step explanation:

Perpendicular line have opposite reciprocal slopes.

The slope (m) would be [tex]\frac{-1}{2}[/tex]

To find the y-intercept use:

y from the point (-4,5)

m = [tex]\frac{-1}{2}[/tex]

x from the point (-4,5)

y = mx + b

5 = [tex]\frac{-1}{2}[/tex] (-4) + b

5 = 2 + b  Subtract 2 from both sides

5 - 2 = 2 - 2 + b

3 = b

The y-intercept is 3.

Helping in the name of Jesus.

Fractions are referred to as the components of a whole in mathematics. A single object or a collection of objects might be the entire. 480 is the value for given fraction.

Fractions are referred to as the components of a whole in mathematics. A single object or a collection of objects might be the entire. When we carve an element of cake in real life from the entire cake, the part represents the percent of the cake. The word "fraction" is derived from Latin. "Fractus" means "broken" in Latin.  

3/4 of 640 = 480

To know more about fraction, here:

https://brainly.com/question/605816

#SPJ1

Your question is incomplete but most probably your full question was,

How do i figure out 3/4 of 640 fraction

The student needs to score 64 points on the 80-point test to get a test score of 80%.

Let x be the number of points the student needs to score on the 80-point test to get a test score of 80%. We can set up the proportion:

x/80 = 80/100

In words, this proportion says that the ratio of the student's score (x points) to the total points on the test (80 points) is equal to the ratio of the desired test score (80%) to 100%.

We can simplify this proportion by multiplying both sides by 80:

x = (80/100) x 80

x = 64

Therefore, the student needs to score 64 points on the 80-point test to get a test score of 80%.

To know more about ratios follow

https://brainly.com/question/29238356

#SPJ1

Answer:

0.407

StepTo write the given numbers as a decimal rounded to 3 decimal places, we need to divide 11 by 27:

markdown

11 ÷ 27 = 0.407407407...

Rounded to three decimal places, the answer is:

markdown

0.407

Therefore, 11/27 as a decimal rounded to 3 decimal places is 0.407.-by-step explanation:

The coefficient matrix is singular (option a).

The system of equation is solved using the matrix inverse methods (option b).

In mathematics, a matrix is a rectangular array of numbers, and a system of linear equations can be written in matrix form as Ax = b, where A is the coefficient matrix, x is the variable matrix, and b is the constant matrix.

Matrix inverse methods involve finding the inverse of the coefficient matrix, A⁻¹, and then multiplying both sides of the equation by A⁻¹ to isolate x. However, this method can only be used if A is invertible or non-singular, meaning it has a unique solution.

Now, let's look at the system of equations you provided:

x₁ + 3x₂ - 2x₃ = -9 2x₁ + 4x₂ + x₃ = -6 x₁ + x₂ + 3x₃ = 3

To determine if matrix inverse methods can be used, we need to check if A is invertible. One way to do this is to calculate the determinant of A. If det(A) = 0, then A is singular and matrix inverse methods cannot be used.

Calculating the determinant of A, we get:

det(A) = | 1 3 -2 | | 2 4 1 | | 1 1 3 |

= 1(12-1) - 3(9+2) - 2(4-2) = -27

Since det(A) ≠ 0, A is invertible and matrix inverse methods could be used. However, this method is not recommended due to the complexity of finding the inverse matrix.

Hence the correct option is (b).

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

It seems that a study was conducted to investigate the effects of cinnamon on people's health. The question at hand is whether the data from the study provide convincing statistical evidence that taking cinnamon for one month results in a higher proportion of people being classified as normal compared to those who do not take cinnamon.

However, in general, statistical evidence is considered convincing when the probability of the observed results occurring by chance alone is very low. This is typically determined by calculating a p-value, which is a measure of the probability of obtaining results as extreme as the ones observed, assuming that there is no real effect of the intervention being tested (in this case, cinnamon).

Without more information, it is difficult to say whether the data from this study provide convincing statistical evidence for the effectiveness of cinnamon. It is also important to note that statistical evidence alone does not necessarily provide a complete picture of whether a treatment or intervention is effective or safe. Other factors, such as potential side effects and the overall health and needs of the people being treated, should also be considered.

learn more about statistical evidence here: brainly.com/question/27382920

#SPJ11

Answer:

sin B = (1/2)√2 = √2/2, so B = 45°

Step-by-step explanation:

a) For AB:

[tex] \sqrt{2 {x}^{2} + 20x + 50} [/tex]

[tex] \sqrt{2( {x}^{2} + 10x + 25) } [/tex]

[tex] \sqrt{2 {(x + 5)}^{2} } [/tex]

[tex](x + 5) \sqrt{2} [/tex]

So sin B = AC/AB = 1/√2 = √2/2, and it follows that B = 45°.

The value of the angle and side using trigonometric ratio is:

∠B = 45°

sin B = 1/√2

The three primary trigonometric ratios are:

sin x = opposite/hypotenuse

cos x = adjacent/hypotenuse

tan x = opposite/adjacent

From the diagram, using trigonometric ratios, we have:

sin B = (x + 5)/√(2x² + 20x + 50)

Now, using Pythagoras theorem, we can find the side BC. Thus:

BC = √[(2x² + 20x + 50) - (x + 5)²]

BC = √(2x² + 20x + 50 - x² - 10x - 25)

BC = √x² + 10x + 25

BC = √(x + 5)²

BC = x + 5

Since AC = BC, it means it is an Isosceles triangle and so ∠B = 45°

Read more about Trigonometric ratio at: https://brainly.com/question/13276558

#SPJ1

Mathematically, we can see this by examining the eigenvalues of the system. The eigenvalues of the homogeneous system (corresponding to the complementary solution) will determine the stability of the system.

Given the ODE X" + bx' + 4x = 0, we can see that it has constant coefficients (b and 4) and is second order. To find the complementary solution Ic, we first assume that X is of the form e^(rt), where r is a constant to be determined. We can then substitute this into the ODE to get the characteristic equation:

r^2 + br + 4 = 0

Using the quadratic formula, we can solve for r:

r = (-b ± sqrt(b^2 - 16)) / 2

If the discriminant (b^2 - 16) is negative, then we have complex roots, which means our complementary solution will involve sines and cosines. If the discriminant is zero, then we have a repeated real root, and if it is positive, then we have two distinct real roots.

For simplicity, let's assume that the discriminant is positive and we have two distinct real roots. Then our complementary solution will be of the form:

Xc = c1e^(r1t) + c2e^(r2t)

where c1 and c2 are constants to be determined by initial conditions.

To find the general form for X that would be used with the method of undetermined coefficients, we first need to find the homogeneous solution (Xc) and its derivatives:

Xc = c1e^(r1t) + c2e^(r2t)
Xc' = c1r1e^(r1t) + c2r2e^(r2t)
Xc" = c1r1^2e^(r1t) + c2r2^2e^(r2t)

We can then substitute these expressions into the ODE and solve for the coefficients of the particular solution (Xp), which will depend on the form of the nonhomogeneous term. Since we don't have a nonhomogeneous term given in this question, we can't determine the form of Xp, but we can write the general form for X as:

X = Xc + Xp

Now, onto part B of the question. If we plot the solution x as a function of time, we can see that there is a significant difference between the nature of the solution near t = 0 and that for large values of t. This is because the complementary solution Xc will decay over time, while the nonhomogeneous term (if present) will dominate the solution for large values of t.

If the real parts of the eigenvalues are negative, then the system is stable and the complementary solution will decay over time. If the real parts are positive, then the system is unstable and the complementary solution will grow over time. If the real parts are zero, then the system is marginally stable and the complementary solution will remain constant over time.

Learn more about :

quadratic formula : brainly.com/question/29077328

#SPJ11

Answer:

a = 60° because alternative angles (opposite angles) are equal

b = 120° because alternative angles (opposite angles) are equal

The probability that a hand of seven cards drawn at random from a standard 52 card deck contains four cards of one kind and three of another kind is 0.000233.

To calculate the probability of drawing a hand of seven cards containing four cards of one kind and three of another kind, we first need to determine the number of ways we can form such a hand. T

here are 13 ranks of cards in a standard deck, and we need to choose two of them: one for the four cards and one for the three cards. We can do this in 13 choose 2 ways: C(13,2) = 78

Once we have chosen the two ranks, we need to select four cards of one rank and three cards of the other rank. For the first rank, there are C(4,4) = 1 ways to choose four cards, and for the second rank, there are C(4,3) = 4 ways to choose three cards. So the total number of ways to form the desired hand is: 78 * 1 * 4 = 312

Finally, we need to divide this by the total number of possible seven-card hands, which is C(52,7): C(52,7) = 133,784,560 So the probability of drawing a hand of seven cards containing four cards of one kind and three of another kind is: 312 / 133,784,560 ≈ 0.000233

Visit here to learn more about Probability:

brainly.com/question/13604758

#SPJ11

(a) Let's denote the event that a red ball was initially removed as "R", and the event that a blue ball was initially removed as "B". We want to find the probability of event R given that the ball was observed to be blue in all six experiments.

By Bayes' Theorem, we have:

P(R | 6 blue) = [P(6 blue | R) * P(R)] / [P(6 blue | R) * P(R) + P(6 blue | B) * P(B)]

P(6 blue | R) represents the probability of observing blue in all six experiments given that a red ball was initially removed. Since the balls are replaced after each experiment, the probability of drawing a blue ball in one experiment given that a red ball was initially removed is 4/8 = 1/2.

P(R) represents the probability of initially removing a red ball, which is 4/8 = 1/2.

P(6 blue | B) represents the probability of observing blue in all six experiments given that a blue ball was initially removed. Since the balls are replaced after each experiment, the probability of drawing a blue ball in one experiment given that a blue ball was initially removed is also 4/8 = 1/2.

P(B) represents the probability of initially removing a blue ball, which is 4/8 = 1/2.

Substituting the values into the equation:

P(R | 6 blue) = [(1/2) * (1/2)] / [(1/2) * (1/2) + (1/2) * (1/2)] = (1/4) / (1/4 + 1/4) = 1/2

Therefore, the probability that a red ball was initially removed from the box, given that a blue ball was observed in all six experiments, is 1/2.

(b) Similarly, using the same reasoning, we can apply Bayes' Theorem to calculate the probability of event R (red ball was initially removed) given that the ball was observed to be red 36 times and blue 47 times in 83 experiments:

P(R |

To know more about probability refer here

https://brainly.com/question/29990226#

#SPJ11

The work done by the force field F(x, y) in moving an object along an arch of the cycloid r(t) is approximately 19.739 units.

To find the work done by the force field F(x, y) = xi + (y + 3)j in moving an object along an arch of the cycloid r(t) = (t - sin(t))i + (1 - cos(t))j with 0 ≤ t ≤ 2π, we will use the following formula:

Work = ∫(F • dr)

First, we need to find the derivative dr/dt:

dr/dt = (1 - cos(t))i + sin(t)j

Next, we need to find F(r(t)). To do this, we substitute r(t) into F(x, y):

F(r(t)) = (t - sin(t))i + ((1 - cos(t)) + 3)j

Now, we calculate the dot product F(r(t)) • dr/dt:

F(r(t)) • dr/dt = (t - sin(t))(1 - cos(t)) + (1 - cos(t) + 3)sin(t)

Finally, we integrate the dot product with respect to t from 0 to 2π:

Work = ∫(F(r(t)) • dr/dt) dt from 0 to 2π

After evaluating the integral, we get:

Work ≈ 19.739

To know more about work done, refer to the link below:

https://brainly.com/question/17119136#

#SPJ11

d/dx sin³x²

3 (sinx²)² d/dx sinx²

3 (sin x²)² *cosx²d/dx x²

3 (sin x²)² *cosx²*2x

6x(sin x²)² cosx²

The value of x in the chord intersection is 9 units.

The intersecting chord theorem states the products of the lengths of the line segments on each chord are equal.

In other words, If two chords intersect in a circle , then the products of the measures of the segments of the chords are equal.

Therefore, let's find the value of x as follows:

10x = (x + 6)6

10x = 6x + 36

10x = 6x + 36

10x - 6x = 36

4x = 36

divide both sides by 4

x = 36 / 4

x = 9

learn more on chord here: https://brainly.com/question/19008587

#SPJ1

The team can bring 22 players to the tournament.

To discover the number of players the group can bring to the tournament, we need to subtract the price of the bus rental from the whole quantity raised after which divide the result with the aid of the budgeted quantity according to player:

$1724 - $948.50 = $775.50 (amount remaining after bus rental)

$775.50 ÷ $35.25 = 22.007 (number of players the team can bring)

Rounding to the nearest whole number, the team can bring 22 players to the match.

Therefore, the team can bring 22 players to the tournament.

Learn more about subtraction:-

https://brainly.com/question/28467694

#SPJ4

If (x1, . . . , xn) is a sample from a Bernoulli distribution with unknown parameter θ ∈ [0, 1], this means that each xi is a binary outcome (either 0 or 1) with probability θ of being 1.

The goal is to estimate θ based on the observed sample. One common estimator for θ is the sample mean, which is simply the sum of the xi's divided by n. That is, the estimator is:

θ_hat = (x1 + ... + xn) / n

This estimator is unbiased, meaning that its expected value is equal to the true value of θ. In other words, if we repeatedly take samples and calculate the sample mean, the average of those sample means will be equal to θ. Additionally, the variance of this estimator is given by:

Var(θ_hat) = θ(1 - θ) / n

This tells us how much we can expect the estimator to vary from the true value of θ. The variance is smaller when the sample size n is larger, and when the true value of θ is close to 0.5 (since the variance is maximized at θ = 0.5). Overall, the sample mean is a useful estimator for the parameter θ in the Bernoulli distribution.

To learn more about probability visit;

https://brainly.com/question/30034780

#SPJ11

The maximum and minimum values of f(x, y) = x² + 9y on ellipse 4x² + 9y² = 9 is  ([tex]\frac{3\sqrt{-3} }{2}, 2[/tex]).

A function is a relationship between two values, x from the first set and y from the second set. The greatest value of a function is regarded as the function's maximum value, while the lowest value is regarded as the function's minimum value.

The following procedures should be taken in order to determine a function's maximum and lowest values: Find the roots of the differentiated function, the first derivative of the function, and the critical point. Apply the crucial result from the function's second derivative to the provided function's second derivative to find its second derivative. If the critical point replaced in the second derivative is positive or negative, find the maximum/minimum value by replacing the points at which the original function reaches either of its critical values.

First, we solve the constraint function for x² so we can simplify f(x,y) into f(y).

4x² + 9y² = 9

x² = 9-9y²/4

We then substitute the equation for x² into the function and simplify.

f(y) =  x² + 9y

f(y) = 9-9y²/4 + 9y

f(x) = 9-9y²/4 + 9y

f'(x) = -9y/2 + 9

0 = -9y/2 + 9

-9 = -9y/2

y = 2

f(x) = 9-9y²/4 + 9y

f'(x) = -9y/2 + 9

f"(x) = -9/2

4x² + 9y² = 9

4(x)² + 9(2)² = 9

4x² = 9 - 36

4x² = -27

x² = -27/4

x = [tex]\frac{3\sqrt{-3} }{2}[/tex]

The maximum and minimum function occurs at the point is ([tex]\frac{3\sqrt{-3} }{2}, 2[/tex]).

Learn more about Maximum and Minimum value:

https://brainly.com/question/30236354

#SPJ4

The minimum surface area of a rectangular prism with a volume of 300 units must lie somewhere between 0 and ∞.

Let's say that the rectangular prism has a length of "l" units, width of "w" units, and height of "h" units. The volume of the rectangular prism is given by the formula V = l × w × h, and we know that V = 300 units.

To find the smallest surface area possible, we need to minimize the sum of the areas of all six faces. The surface area (SA) of a rectangular prism is given by the formula SA = 2lw + 2lh + 2wh.

Using the formula for volume, we can solve for one of the variables in terms of the other two. For example, we can solve for "h" as follows:

V = l × w × h

300 = l × w × h

h = 300 / (l × w)

Substituting this expression for "h" into the formula for surface area, we get:

SA = 2lw + 2l(300 / lw) + 2w(300 / lw)

SA = 2lw + 600 / w + 600 / l

Now we need to find the minimum value of SA. To do this, we can take the derivative of SA with respect to either "l" or "w", set it equal to zero, and solve for the corresponding variable. Since the derivative is the same regardless of which variable we choose, we can take the derivative with respect to "l":

dSA/dl = 2w - 600 / l² = 0

l² = 300 / w

Substituting this expression for "l²" back into the formula for surface area, we get:

SA = 2lw + 600 / w + 600w / 300 / w

SA = 2lw + 600 / w + 2w²

Now we can take the derivative of SA with respect to "w" and set it equal to zero:

dSA/dw = 2l - 600 / w² + 4w = 0

w³ - 150lw + 150 = 0

Taking the limit as "w" approaches infinity, we get:

lim SA as w → ∞ = 2lw + 600 / ∞ + 2∞²

lim SA as w → ∞ = 2lw + 0 + ∞

This limit is also undefined, which means that there is no rectangular prism with a volume of 300 units and infinite surface area.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ1