Jakim deposited $10,000 in an account that earned simple interest annually.


- He did not make additional deposits nor withdrawals.


-At the end of 7 years, the balance was $12,100.


What is the interest rate on this account?

a) The anomalous result in the table is the Durablast battery in the second trial, which recorded a time taken of 768 seconds.

b) The mean averages for each brand of battery are 955.33, 852 and 908 seconds.

c) the amount of charge stored by each brand of battery is 1098.6 coulombs, 1065 coulombs and 1089.6 coulombs.

d) The results of this experiment can be presented in a table format, showing the current flowing, the mean time taken, and the amount of charge stored for each brand of battery.

It is an unexpected or unusual outcome that does not agree with the expected or accepted outcome. It may be a result of a mistake, an anomaly in the data, or a misinterpretation of the data.

a) The anomalous result in the table is the Durablast battery in the second trial, which recorded a time taken of 768 seconds.

b) The mean averages for each brand of battery are:

Longalast: 955.33 seconds

Durablast: 852 seconds

Morelife: 908 seconds

c) The amount of charge stored by each brand of battery can be calculated by multiplying the current flowing into the toothbrush (amps) by the mean time taken (seconds) for each battery:

Longalast: 1.15 amps x 955.33 seconds = 1098.6 coulombs

Durablast: 1.25 amps x 852 seconds = 1065 coulombs

Morelife: 1.20 amps x 908 seconds = 1089.6 coulombs

d) The results of this experiment can be presented in a table format, showing the current flowing, the mean time taken, and the amount of charge stored for each brand of battery. This would allow the reader to easily compare the performance of each battery, as well as to identify any anomalous results.

For more questions related to experiment

https://brainly.com/question/25677592

#SPJ1

The measure of the exterior angle at vertex A is equal to the sum of the measures of angles BAC and BCA, which is angle A + angle C.

An exterior angle is an angle that forms a linear pair with an interior angle of a polygon. It is formed by extending one of the sides of the polygon. In other words, it is the angle formed between a side of a polygon and the extension of an adjacent side.

Based on the problem description, we can see that the exterior angle at vertex A is equal to the sum of the measures of angles BAC and BCA. Therefore, we need to find the measure of the exterior angle at vertex A.

We know that the sum of the measures of the angles in a triangle is 180 degrees. So, we can find the measure of angle BAC by subtracting the measures of angles BCA and ABC from 180 degrees:

angle BAC = 180 - angle BCA - angle ABC

We can find the measure of angle ABC by subtracting the measure of angle A from 180 degrees:

angle ABC = 180 - angle A

Similarly, we can find the measure of angle BCA by subtracting the measure of angle C from 180 degrees:

angle BCA = 180 - angle C

Substituting these expressions into the equation for angle BAC, we get:

angle BAC = 180 - (180 - angle A) - (180 - angle C)

         = angle A + angle C

Therefore, the measure of the exterior angle at vertex A is equal to the sum of the measures of angles BAC and BCA, which is angle A + angle C.

To learn more about the exterior angle visit:

https://brainly.com/question/29389110

#SPJ1

Answer:

25

Step-by-step explanation:

Formula 1/2(B1+B2)H

1/2(10)5

1/2 x 10=5

5 x 5 =25

Answer:

C) x² + y² = 25

Step-by-step explanation:

the center is (0, 0).

so, the generic circle equation

(x−h)² + (y−k)² = r². The center is (h, k) and the radius is r units.

for (h, k) = (0, 0) this gives us the equation above.

and r we can easily see as the distance from the center to one of the points on the circle arc. which is 5, as the coordinates tell us.

Answer:

3 inches

Step-by-step explanation:

area of a rectangle

12×5

Answer: a ≤ 2

Step-by-step explanation:

How to write an inequality statement:

Step 1: Write the two values being compared in the problem.

Step 2: Determine whether the first value is larger or smaller than the second value.

Step 3: Express the inequality with the right symbols:

≤ = less than or equal to

≥ = greater than or equal to

Therefore, the answer would be a≤2.

Hope this helped!

Since the mid 1950s, both men and women in the U.S. have experienced an increase in the proportion of the population never married. The correct answer is "increase".

This trend has been attributed to various factors such as the rise of individualism, changing gender roles, economic factors, and the decline of traditional social norms. In 1960, only 9% of women and 6% of men aged 25-34 had never been married, while in 2020, these numbers increased to 33% for women and 23% for men.

Therefore, it is evident that the proportion of the U.S. population never married has increased steadily over the past few decades

To learn more about proportion here:

brainly.com/question/30657439#

#SPJ11

Thus, the value of y for the given direct variation is found as y = 34.96 (Rounded up to two decimal places).

When two quantities, including such time and distance or hours and compensation, change directly, they do so at a predictable rate.

The constant of variation is another name for the constant rate of increase or decline. We will examine three different methods of showing direct variation in this lesson: an equation, a table, and just a graph.

For the given question:

y varies directly as the square root of x.

y ∝ √x

y = k√x  

Here, k is the constant of proportionality

Now,

y=43 when x=289 .

43 = k√289

k = 43/√289

k = 2.53

Now, y when  x=191.

y = k√x  

y = 2.53√191

y = 34.96

Thus, the value of y for the given direct variation is found as y = 34.96 (Rounded up to two decimal places).

Know more about the direct variation

https://brainly.com/question/25215474

#SPJ1

It seems like your question is incomplete. Please provide the complete question or topic you would like me to discuss,

As an AI language model, I am happy to help you with your question. However, I do not have enough information about your inquiry. Please provide me with more details so that I can give you a relevant answer.

Are you asking about a specific topic or subject?

What are the terms that you would like me to include in my response?

Once I have a better understanding of your question, I will be able to provide you with a well-researched and accurate answer. Thank you for choosing OpenAI, and I look forward to assisting you further.

Hello! including any specific terms or concepts you'd like me to include in my response. I'm here to help you

To learn more about : incomplete

https://brainly.com/question/29006017

#SPJ11

The number described in the question, whose stated percentage difference is 36, is 80.

Let us represent the number as x. So, the increased number will be -

Increased number = x + 20%×x

Simplify percentage

Increases number = x + 0.2x

Add the digits

Increased number = 1.2x

Similarly, decreased number = x - 25%×x

Converting percentage

Decreased number = x - 0.25x

Subtract the digits

Decreased number = 0.75x

Representing the difference

1.2x - 0.75x = 36

Subtract

0.45x = 36

Divide

x = 80

Hence, the number is 80.

Learn more about percentage -

https://brainly.com/question/843074

#SPJ4

To check the normality of the sampling distribution for a one-sample z confidence interval for proportions, the sample size should be large (typically n > 30), and the number of successes and failures in the sample should both be at least 10.

To check for normality of the sampling distribution for a one-sample z confidence interval for proportions, we need to ensure that the following conditions are met:

Large sample size: The sample size should be sufficiently large (typically n > 30). This is because the central limit theorem states that for large enough sample sizes, the sampling distribution of the sample proportion will be approximately normal, regardless of the underlying distribution of the population.

Success-Failure Condition: The number of successes (np) and failures (n(1-p)) in the sample should both be at least 10. This condition ensures that the binomial distribution of the sample proportion is approximately normal.

If these conditions are met, then we can assume that the sampling distribution of the sample proportion is approximately normal, and we can proceed to construct a one-sample z confidence interval for proportions.

Learn more about sampling distribution :

https://brainly.com/question/29451043

#SPJ4

The probability that it is yellow is 1/4.

What is probability?

The probability of an occurrence is a figure that represents how likely it is that the event will take place. In terms of percentage notation, it is expressed as a number between 0 and 1, or between 0% and 100%. The higher the likelihood, the more likely it is that the event will take place.

Here, we have

Given: A bag with 8 marbles has 2 yellow marbles, 3 red marbles, and 3 blue marbles. A marble is chosen from the bag at random.

We have to find the probability that it is yellow.

the probability that it is yellow:

= 2/8

= 1/4

Hence, the probability that it is yellow is 1/4.

To learn more about the probability  from the given link

https://brainly.com/question/24756209

#SPJ1

The required fraction for the given condition is [tex]\frac{1}{3}[/tex]

A fraction is a part of a whole. In arithmetic, the number is expressed as a quotient, in which the numerator is divided by the denominator. In a simple fraction, both are integers. A complex fraction has a fraction in the numerator or denominator. In a proper fraction, the numerator is less than the denominator.

Give shape contain 12 squares out of then four squares are shaded.

so, required fraction can be determine as

[tex]$Fraction=\frac{4}{12}[/tex]

[tex]$Fraction=\frac{1}{3}[/tex]

Thus, required fraction is [tex]\frac{1}{3}[/tex]

To know more about fraction visit:

brainly.com/question/8969674

#SPJ1

Complete question;

Answer:

f(x) = -x -11

    = -9-11 = -20

f(x) = -x-11

    = -6-11= -17

Step-by-step explanation:

Answer:

Therefore, P(X = 2) ≈ 0.1247 - 0.0337 ≈ 0.091, or about 9.1%.

Step-by-step explanation:

We can use the Poisson approximation to the binomial distribution when n (the number of trials) is large and p (the probability of success) is small. In this case, n = 100 and p = 0.05, so np = 5, which is not too small. However, we can still use the approximation as long as we adjust for continuity, by adding and subtracting 0.5 from the number of successes we're interested in.

Let X be the number of books with defective bindings out of 100. We want to find the probability that X = 2. Using the Poisson approximation, we have:

λ = np = 5

P(X = 2) ≈ P(1.5 < Y < 2.5), where Y is a Poisson random variable with parameter λ

To find this probability, we can use the cumulative distribution function (CDF) of Y:

P(X = 2) ≈ P(1.5 < Y < 2.5) = F(2.5) - F(1.5), where F(x) is the CDF of Y evaluated at x

The CDF of a Poisson distribution with parameter λ is given by:

F(x) = e^(-λ) * Σ(λ^k / k!, k = 0 to floor(x))

where floor (x) is the greatest integer less than or equal to x. Using this formula, we can calculate:

F(1.5) = e^(-5) * Σ(5^k / k!, k = 0 to 1) ≈ 0.0337

F(2.5) = e^(-5) * Σ(5^k / k!, k = 0 to 2) ≈ 0.1247

Therefore, P(X = 2) ≈ 0.1247 - 0.0337 ≈ 0.091, or about 9.1%.

The probability that 2 of the 100 books bound by this bindery will have defective bindings using the poisson approximation to the binomial distribution is  0.0842.

Since the number of books bound, n = 100, is large and the probability of defective bindings, p = 0.05, is small, we can use the Poisson approximation to the binomial distribution.

The mean, µ, of the Poisson distribution is µ = np = 100 x 0.05 = 5.

The probability of 2 defective bindings can be calculated using the Poisson probability formula:

P(X = 2) = (e^-µ) * (µ^x) / x!

= (e^-5) * (5^2) / 2!

= 0.0842 (rounded to four decimal places)

Using the Poisson approximation to the binomial distribution, the likelihood that 2 of the 100 volumes bound by this bindery will have faulty bindings is roughly 0.0842.

Learn more about probability at https://brainly.com/question/14619999

#SPJ11

The appropriate statistical test for whether the mean rating of guilts are greater for unattractive defendants than for attractive is:

B. 1 tailed t-test.

At the null hypothesis, it is tested if the mean rating of guilt will not be higher for unattractive defendants than for attractive defendants, that is:

H0  : uU <=uA

At the alternative hypothesis, it is tested if the rating is greater, that is:

H1 : uU> uA

We are comparing the means, hence a t-test is used. We are testing if one is greater than other(not different), hence a 1-tailed test is used, and option B is correct.

Learn more about hypothesis test here :-

8https://brainly.com/question/30588452

#SPJ4

Answer:

[tex]6.45ft^{2}[/tex]

Step-by-step explanation:

To convert the score of 14 to a z-score, we use the formula:

z = (x - μ) / σ

where x is the raw score, μ is the population mean, and σ is the population standard deviation.

Substituting the given values, we get:

z = (14 - 20) / 2.8

z = -2.14

The z-score of -2.14 indicates that the score of 14 is quite far from the mean of 20, which makes it an unusual score. To determine how unusual it is, we can compare the z-score to the standard normal distribution table.

The table shows that a z-score of -2.14 corresponds to a probability of approximately 0.016. This means that only about 1.6% of contestants would receive a score of 14 or lower in this cooking contest. Therefore, we can conclude that the score of 14 is unusual.

Answer:

the last 3 are true

Step-by-step explanation:

hope this helps

The probability of not getting a clay pot or a cactus when randomly picking a plant and a pot from a selection of 4 plants and 4 pots is 0.75 or 75%.

There are a total of 4 x 4 = 16 possible outcomes when randomly picking a plant and a pot. Out of these, we need to count the number of outcomes where we don't get a clay pot or a cactus.

Let's start by counting the number of outcomes where we get a clay pot or a cactus. There are 4 possible outcomes for the plant (cactus or one of the three other plants) and 1 possible outcome for the pot (clay pot). So there are 4 x 1 = 4 outcomes where we get a cactus or a clay pot.

Therefore, the number of outcomes where we don't get a cactus or a clay pot is:

16 - 4 = 12

So the probability of getting a plant and a pot where neither the plant is a cactus nor the pot is a clay pot is:

P = number of outcomes where we don't get a cactus or a clay pot / total number of outcomes

= 12 / 16

= 0.75

Therefore, the probability of not getting a clay pot or a cactus is 0.75 or 75%.

To learn more about probability please click on below link        

https://brainly.com/question/16484393

#SPJ1

The table of values when completed using y = 10x is a linear function

From the question, we have the following parameters that can be used in our computation:

The incomplete table

When completed, we have

Levels    Toothpicks

1                     10

2                   20

3                   30

4                   40

5                   50

6                   60

7                   70

8                   80

The means that

Toothpicks = 10 * Level

So, we have the equation to be

y = 10x

This is a linear function

Read more about linear functions at

https://brainly.com/question/15602982

#SPJ1

a) We would expect approximately 0.2325 × 200 = 46.5 vehicles

to fail in their first 2 years. Since we cannot have a fraction of a vehicle

failing, we would expect around 46 or 47 vehicles to fail in their first 2

years.

b) The approximate probability that 50 or more vehicles fail in

the first 2 years is 0.0004.

c) The approximate probability that no more than 10 of the remaining

vehicles fail in their first 2 years, given that 30 have already failed, is 0.0002.

a) The average lifespan of the vehicle is 8 years, and it follows an

exponential distribution, which has a probability density function of

[tex]f(x) = (1/θ) \times e^(-x/θ)[/tex],

where θ is the mean of the distribution. Thus, θ = 8.

The probability that a vehicle fails in the first 2 years can be found by

integrating the exponential probability density function from 0 to 2:

P(X ≤ 2) = ∫[0,2] f(x) dx = ∫[0,2] (1/8) × e^(-x/8) dx

Using a calculator or a table of integrals, we can find this probability to

be approximately 0.2325.

b) The number of vehicles that fail in the first 2 years follows a Poisson

distribution with parameter λ = 200 × P(X ≤ 2) = 200 × 0.2325 = 46.5.

The probability that 50 or more vehicles fail in the first 2 years can be

found using the Poisson distribution with parameter λ = 46.5:

P(X ≥ 50) = 1 - P(X < 50)

Using a Poisson distribution table or a calculator, we can find that P(X <

50) is approximately 0.9996.

Thus, P(X ≥ 50) = 1 - 0.9996 = 0.0004 (approximately).

c) Given that 30 vehicles have already failed in under 2 years, we need

to find the probability that no more than 10 of the remaining 170 vehicles

fail in their first 2 years.

The number of vehicles that fail in the first 2 years follows a Poisson

distribution with parameter λ = 170 × P(X ≤ 2) = 170 × 0.2325 = 39.525

(rounded to 40).

Thus, we need to find P(Y ≤ 10), where Y is a Poisson random variable

with parameter λ = 40.

Using a Poisson distribution table or a calculator, we can find that P(Y ≤

10) is approximately 0.0002.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

Answer: -32.00

Step-by-step explanation:

Answer:

A) -32.00

Step-by-step explanation:

-32.00 would be more debt than -25

Helping in the name of Jesus.

Answer: To find how many free throw shots Shawn makes out of 300 shots, we can first find how many he makes out of 100 shots, and then multiply by 3 to get the number of shots he makes out of 300.

If he makes 15 1/5 shots out of 100, we can convert this to a decimal by dividing 15 by 100 and adding 1/5, which is the same as adding 0.2. This gives:

15/100 + 1/5 = 0.15 + 0.2 = 0.35

So, on average, Shawn makes 35% of the free throw shots he attempts.

To find how many shots he makes out of 300, we can multiply this percentage by 300:

0.35 x 300 = 105

Therefore, Shawn makes about 105 free throw shots out of 300 shots.

Step-by-step explanation:

The average speed of a falling object during the first 3 seconds of its fall is h(3)-h(0)/3.

The model of the motion of the body is given by, and the function of the motion of the body is given by h(t) = 300 - 16t².

The speed of object after 3 seconds is given by . The falling speed of object during the first 3 seconds of falling is calculated as follows, v = dh(t)/dt = -32t.

So now the average speed of the movement is calculated as follows,

v = h(3)-h(0)/3.

Option d is therefore the correct option.

To know more about average motion, visit,

https://brainly.com/question/25902294

#SPJ4

Complete question - the height, h, of a falling object t seconds after it is dropped from a platform 300 feet above the ground is modeled by the function . what is the average rate at which the object falls during the first 3 seconds?

A.) h(3) – h(0)

B.) h(3/3)-h(0/3)

C.) h(3)/3

D.) (h(3)-h(0))/3

The missing numbers to fill the question marks are 2.1 and 7.11

To solve the question, we need to look for a pattern or relationship between the given numbers. One way to approach this is to consider the decimal representation of each number.

If we look at the first number, 0.13, we can see that it has 2 digits after the decimal point.

The second number, 6.02, has 2 digits before the decimal point.

So, it's possible that the missing numbers also follow a pattern where one number has 2 digits before the decimal point, and the other has n digits after the decimal point.

Using the decimal points, one possible pattern is 2, 2.1, 0.13, 6.02, 7.11

Read more about pattern at

https://brainly.com/question/30499691

#SPJ1

The work done pulling the bucket to the top of the well of depth 76 feet is equals to the 346.56 pounds/ feet.

Work is the product of force and distance, W=F×d. A Riemann Sum is a collection of rectangles used to approximate the area underneath a curve. In this case the "height" of the rectangle will be the force being exerted, and the "width" of the rectangle will be the amount of distance it moved. The work done by the force on the object can be expressed as an integral, [tex]W = \int_{a}^{b}F(x)dx[/tex]

Weigh of bucket = 5 pounds

A rope with negligible weight is used to draw water from a well. The depth of well = 76 feet.

Initially, Water in bucket = 37 pounds

Rate of pulling rope = 1.8 feet per second

Rate of water leaking in bucket = 0.25 pounds per second

Changing rate of leaking from pounds/sec to pounds/ feet : Q = 0.25/1.8 pounds/feet

= 0.139 pounds per feet

Thus, the rate of water leak from bucket hole is 0.12 pounds per feet. Let 'x' be height of bucket in feet from bottom of well. So, the total water leaked from hole = 0.12x

After leakage Remaining water in bucket = (37 - 0.12x )pounds

Also, add the weigh of buket in above expression. The limits of integration varies with depth of well that is 0 to 76 feet. Using Riemann sum method, work done pulling the bucket to the top of the well, [tex]W = \int_{0}^{76} ( 37 - 0.12x + 5 ) dx [/tex]

=>[tex]W = \int_{0}^{76} ( 42 - 0.12x ) dx [/tex]

=> [tex]W = [0 - \frac{0.12x²}{2}]_{0}^{76} \\ [/tex]

=> [tex]W = \frac{0.12×76²}{2} - 0 [/tex]

=> W = 0.12× 38×76 = 346.56 pounds/ feet. Hence required work done is 346.56 pounds/ feet.

For more information about Riemann Sum , visit :

https://brainly.com/question/29131767

#SPJ4

Answer: Slope: 1/3

Y-intercept: 0 (since there is no constant term)

The 43rd term of the sequence is 149.

Arithmetic progression is a sequence of numbers in which the difference between any two consecutive numbers is a constant value. The constant value is called a common difference.

We can see that the common difference between consecutive terms in the sequence is 4. So, we can use the formula for the nth term of an arithmetic sequence:

an = a1 + (n - 1)d

where a1 is the first term, d is the common difference, and n is the term number we want to find.

To find the 43rd term, we plug in the values:

a1 = -19, d = 4, n = 43

an = -19 + (43 - 1)4

an = -19 + 42(4)

an = -19 + 168

an = 149

Therefore, the 43rd term of the sequence is 149.

To know more about arithmetic progression, click here

https://brainly.com/question/30364336

#SPJ1