Answer:
Changing two or more variables makes it difficult to find a cause and effect relationship.
Materials Visible Uniform Not Visible Non- Uniform State of Matter 1. Sugar and water 2. Oil and water 3. Vinegar and water 4. Salt and pepper 5. leaf and water
Answer:
1. Uniform, non visible
2. Visible, non uniform
3. Uniform, non visible
4. Visible, non uniform
5. Visible, non uniform
Explanation:
A heterogeneous mixture is simply any mixture that is not uniform in composition — it's a non-uniform mixture of smaller constituent parts. By contrast, a mixture that is uniform in composition is a homogenous mixture
visible state of matter is when you can easily difference two components of a mixture
non visible is when the state of the matter in the substance is not visible to the eye, it can't be differentiated
detailed description of how group 1 atoms bond with group 7 atoms
Answer:
group 7 atoms react
Explanation:
When a group 7 element takes part in a reaction, its atoms each gain one electron. These atoms form negatively charged ions . The ions have a stable arrangement of electrons, with a complete outer shell.
What is the molarity of 98.0 g of phosphoric acid, H3PO4 in 1.00 L of solution. Please show your work.
Answer:
1.0001 M
Explanation:
Molarity = Mass/(Volume x molar mass)
Molarity = 98.0 g/(1.00 L x 97.994 g/mol)
Molarity = 1.0001 M
the molarity of 98.0 g of phosphoric acid, H3PO4 in 1.00 L of solution is 1.0001 M
what is the difference between molarity and molality ?Molarity can be defined as the number of moles of solute available in a definite concentration and amount of the solution, other wise called as moles per liters of a solution.
Molality of a solution can be defined as the number of moles per solute can be present in a kilogram of the solvent, which is moles per kilogram of a solvent.
Though the terms Molarity and Molality are quite similar but the sharp difference between them as it creates a huge difference while using this two form of calculation for various calculations.
Molarity = Mass/(Volume x molar mass)
Here, Molarity = 98.0 g/(1.00 L x 97.994 g/mol)
Molarity = 1.0001 M
learn more on molarity, here:
https://brainly.com/question/16727614
#SPJ2
Determine whether the bonds in CCl4 and N2 are polar or non-polar. If the bond is polar, assign the partial positive and negative charges. Electronegativity values: C = 2.5, Cl= 3.0, N= 3.0
Refer to the attachment
According to the molecular geometry, bonds in carbon tetrachloride are polar and that in nitrogen are non polar.
What is molecular geometry?Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.
It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
They provide information about geometry by taking into considerations the vibrational and rotational absorbance of a substance.Neutron and electron diffraction techniques provide information about the distance between nuclei and electron density.
Learn more about molecular geometry,here:
https://brainly.com/question/7558603
#SPJ2
Using the provided table and the equation below, determine the heat of formation (in kJ/mol) for CuBr₂.
CuCl₂ (s) + Br₂(l) → CuBr₂ (s) + Cl₂ (g) ∆H° = 64.1 kJ/mol
CuCl2= -205.9 kJ/mol
Br2= 0 kJ/mol
Cl2= 0 kJ/mol
The heat of formation of CuBr₂ (s) = -141.8 kJ/mol
The heat of reaction ΔH = ∑ΔHproducts - ∑ΔHreactants
ΔH = ΔHCuBr₂ (s) + ΔHCl₂ (g) - [ΔHCuCl₂ (s) + ΔHBr₂(l)]
where ΔHCuBr₂ (s) = heat of formation of CuBr₂ (s), ΔHCl₂ (g) = heat of formation of Cl₂ (g) = 0 kJ/mol, ΔHCuCl₂ (s) = heat of formation of CuCl₂ (s) = -205.9 kJ/mol, ΔHBr₂(l) = heat of formation of Br₂(l) = 0 kJ/mol and ΔH = heat of reaction = 64.1 kJ/mol
Substituting the values of the variables into the equation, we have
ΔH = ΔHCuBr₂ (s) + ΔHCl₂ (g) - [ΔHCuCl₂ (s) + ΔHBr₂(l)]
64.1 kJ/mol = ΔHCuBr₂ (s) + 0 kJ/mol - [-205.9 kJ/mol + 0 kJ/mol]
64.1 kJ/mol = ΔHCuBr₂ (s) + 0 kJ/mol + 205.9 kJ/mol - 0 kJ/mol
64.1 kJ/mol = ΔHCuBr₂ (s) + 205.9 kJ/mol
ΔHCuBr₂ (s) = 64.1 kJ/mol - 205.9 kJ/mol
ΔHCuBr₂ (s) = -141.8 kJ/mol
So, the heat of formation of CuBr₂ (s) = -141.8 kJ/mol
Learn more about heat of formation here:
https://brainly.com/question/13925548
what is the percent by volume of a solution formed by mixing 25ml of isopropanol with 45ml water
Answer:
I assume that you mix the 25 mL alcohol with 45 mL water.
The answer depends on a big IF : IF the volumes are additive. Very often volumes of liquids are not additive
Total volume = 70 mL
isopropyl alcohol %(v/v) = 25mL/ 70 mL * 100 % = 35.7% v/v
The answer should have only 2 significant digits: 36%v/v
Explanation:
Hope it helps
The percent by volume of a solution formed by mixing 25 ml of isopropanol with 45 ml of water is 35.71% which is rounded off to 36%.
What is meant by percent by volume of a solution?Percent volume is defined as the concentration of a particular solute which is measured in terms of volume present in a solution. The volume of the solution is present in the denominator which indicates the total volume of all components .
It is expressed as,
percent volume= volume of solute/volume of solution×100
It is used for solutions which are made by mixing two components . It is one of the ways of expressing concentrations of mixture with a dimensionless quantity.
Percent volume of the given solution is calculated by substituting the given values in the formula like, 25/70×100=35.71%
Thus, the percent by volume concentration of the solution is 35.71%≈36%.
Learn more about percent by volume ,here:
https://brainly.com/question/14710169
#SPJ2
Please help me with all ASAP I’ll mark brainly
Answer:
Explanation:
1.c
2.j
3.h
4.b
5.f
6.d
7.a
8.i
9.e
10.g
1. Oxygen was discovered by Joseph Priestley in 1774 when he heated mercury (II) oxide, HgO, to decompose it to form its constituent elements. How many moles of mercury (II) oxide are needed to produce 125 g of oxygen?
Given:
Unknown:
Mole ratio:
Solution:
2. In a blast furnace, iron (III) oxide is used to produce iron by the following (unbalanced) reaction:
Fe2O3(s) + CO(g) Fe(s) + CO2(g)
If 4000 g of Fe2O3 is available to react, how many moles of CO are needed?
Given:
Unknown:
Mole ratio:
Solution:
Final answer:
ugh pls help:(
Answer:
1. 7.81 moles HgO
2. n = mass/molar mass = (4000 g)/(159.69 g/mol) = 25.05 mol.
Explanation:
How many moles of mercury (II) oxide are needed to produce 125 g of oxygen?
2HgO ==> 2Hg + O2
125 g O2 x 1 mol O2/32 g x 2 mol HgO / mol O2 = 7.81 moles HgO
------------------------------------------------------------------------------------------------------------
If 4000 g of Fe2O3 is available to react, how many moles of CO are needed?
The no. of moles of CO are needed = 75.15 mol.
Fe₂O₃ + 3CO → 2Fe + 3CO₂,
It is clear that 1 mol of Fe₂O₃ reacts with 3 mol of CO to produce 2 mol of Fe and 3 mol of CO₂.
If 4.00 kg Fe₂O₃ are available to react, how many moles of CO are needed?
We need to calculate the no. of moles of 4.00 kg Fe₂O₃:
n = mass/molar mass = (4000 g)/(159.69 g/mol) = 25.05 mol.
Using cross multiplication:
1 mol of Fe₂O₃ need → 3 mol of CO to react completely, from stichiometry.
25.05 mol of Fe₂O₃ need → ??? mol of CO to react completely.
The no. of moles of CO are needed = (3 mol)(25.05 mol)/(1 mol) = 75.15 mol.
According to stoichiometry of the chemical equation, if 4000 g of iron oxide is available to react,25.04 moles of CO are needed.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
159.69 g iron oxide gives 28 g CO thus 4000 g iron oxide will give 4000×28/159.69=701.35 g which is 701.35/28=25.04 moles.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ2
where does fertilization occurs in human beings
In human beings fertilization occurs in fallopian tube
Answer:
Fertilization usually takes place in a fallopian tube that links an ovary to the uterus. If the fertilized egg successfully travels down the fallopian tube and implants in the uterus, an embryo starts growing.
What is wrong with this model of the atom.
Answer:
A. The neutrons and electrons are in the wrong place.
Explanation:
The atom's nucleus contains both protons and neutrons, whilst the electrons are arranged in shells around the nucleus.
Sinong pilipino dito kawaykaway naman kayo dyan haha
Answer:
ako po because I'm pilipino
Explanation:
HAHAH same too
3nahco3(aq) + h3c3h5
does exercise increase, decrease or have no effect on the amount of carbon dioxide you exhale
Answer:
It increases the amount you exhale
Explanation:
The more you exercise and make your body work, the more oxygen you inhale which causes you to let out more carbon dioxide than if you were just resting.
What are the substances you start with in a chemical reaction called?
A. The intermediates
B. The products
C. The mixture
D. The reactants
Question 5 of 5
The rows in the periodic table are called periods. What is true about elements
in the same period?
O A. They have the same atomic mass.
B. Their atomic numbers increase by 1 from left to right.
C. Their magnetism increases in strength from left to right.
D. They have similar chemical properties.
SUBMIT
Answer:
B. Their atomic numbers increase by 1 from left to right
draw the lewis dot structure of C4H8N2O3
Explanation:
Refer to the attachment
Extrashots:-
C4H8N2O3 is called asparagine .
______help in increasing rates of reactions
Answer:
Catalysts help in increasing rates of reactions
Answer:
тємρєяαтυяє
Explanation:
Temperature. Usually reactions speed up with increasing temperature.
What would happen if there were no gravity anywhere in the universe?
Objects would no longer be drawn toward each other, because there would be no sloping surface for them to fall down. Instead, they would fly off in whatever direction gravity was keeping them from going.
Answer:
All items in the universe, humans, objects, and the planets, would be floating around. Everything would become weightless.
What did you include in your response? Check all that
apply.
o Organisms eat food to obtain carbohydrates, lipids,
and proteins, which are found in food.
Organisms use these molecules for energy and
growth.
Answer:
WHAT DID YOU INCLUDE IN YOUR RESPONSE
Look at the numbered locations. Our solar system can be found at_____
Location 1
Location 2
Location 3
Location 4
Answer:
location 3...........
state what method you would use the separate water from a potassium iodide solution
Answer:
You can separate the Iodine from the water and convert the potassium iodide into elemental Iodine by mixing 1 part of a 5–13% solution of Iodine/Potassium Iodide with 1 part distilled water and 1 part 3% Hydrogen Peroxide Solution followed by 1/12 part 32.45% hydrochloric (Muriatic) acid.
Which of the following is based on facts and/ or evidence?
Which circle contains the mixture? Is it D?
Si un átomo tiene 18 electrones, cuántos protones tiene?
Answer:
huhhhhhhhhj
hshshhshshshshshsh
5._____is and example of an element and __is an example of compound
A. MIXTURES
B. CARBON
C. PURE
D. CARBON DIOXIDE
PLS ANSWER IT
ITS SCIENCE
Answer:
Carbon Dioxide is and example of an element and Carbon is an example of compound
What is the density of a gas with a volume of 5.6 FL oz. and a mass of 37 grams?
Answer:
6.60
Explanation:
If the atomic mass of an atom is 16 and its atomic number is 7. how many
neutrons does it have?
Answer:
8
Explanation:
If the number of neutrons in the nucleus of the atom is 41, and the atomic number is 40, what is the mass number of that atom
If the number of neutrons in the nucleus of the atom is 41, and the atomic number is 40, the mass number of that atom will be 81
What is mass number?Mass number is the sum of the number of protons which is the atomic number and neutrons of an atom.
It is represented using the letter ‘A.’
How to calculate the mass numberMass number = atomic number + neutrons
We have the atomic number as 40 and the number of neutrons as 41
The mass number = 40 + 41 = 81
Therefore, the mass number of the atom will be 81
Learn more about mass number here:
https://brainly.com/question/1805828
What are the two parts of the third Step?
O Plug and solve
O Formula and solve
O Show work and solve
O Question and show work
Answer:
A
Explanation:
Answer:
I'm not quite sure what the question is. What is the third step? I think I can help, would you mind commenting what the third step is? :)
Explanation:
Select reason(s) why 1-hydroxy-2-methyl-5-isopropylbenzene is an incorrect systematic name for carvacrol.
a. If named with benzene as the parent, the methyl group needs to have the first locant in order to minimize the number of the third locant.
b. The substituents are not listed alphabetically.
c. If named with benzene as the parent, the hydroxyl group needs to have the first locant in order to minimize the number of the third locant.
d. The substituents are not listed in order of increasing mass.
The reason why 1-hydroxy-2-methyl-5-isopropylbenzene is not the correct systematic name for carvacrol is because the substituents are not listed alphabetically.
IUPAC nomenclature provides the correct and acceptable system of naming organic compounds which are internationally acceptable among scientists.
According to the rules of IUPAC nomenclature, compounds are named in alphabetical order. The names of the locants are ordered in such a way that they have the lowest number. Following IUPAC nomenclature, the correct name of the compound ought to be, 1-hydroxy-5-isopropyl-2-methylbenzene.
Learn more: https://brainly.com/question/11587934