Answer:
18 minutes is the half life
The grassland have experience a long season of drought which group of organisms would be affected first A decomposer B herbivores C omnivorous D carnivores
Answer:
Herbivores?
Explanation:
The answer is Herbivores because plants are their main source of food and diet. They would be affected first throughout the drought.
(I hope this is a good answer, it is my first time answering a question. I will change this if it is wrong!)
What is science? what is science?
We define science as the knowledge that seeks to understand truths or natural laws to explain .
What science concept?In the most specific sense of the word, science is that type of knowledge that seeks to understand truths or natural laws to explain the functioning of things and the universe in general.
The concept of science can be defined as a body of systematized knowledge acquired through observation, identification, research and explanation of certain categories of phenomena and facts, and formulated methodically and rationally.
See more about science at brainly.com/question/12842883
Answer:
Science is the acquisition of our own knowledge through experimentation to explain and describe natural phenomena.
Explanation:
Science comes from the Latin word, Scientia, which means knowledge. Knowledge are facts that can be verified.
Which rock is an example of a clastic sedimentary rock?
shale
iron ore
rock salt
limestone
Answer:
Shale
Explanation:
Answer: Shale
Explanation:
An example of a heterogeneous mixture is
A) soil
B) sugar
C) carbon monoxide
D) carbon dioxide
Answer: soil
Explanation:
Soil is composed of various substances in varying proportion.
An example of a heterogeneous mixture is soil as it composed of different phases while all the other 3 substances are composed of single phase.
What is a heterogeneous mixture?
Heterogeneous mixtures is defined as a type of mixture where in the composition is not uniform throughout the mixture.It consists as two or more phases. The phases are chemically distinct from each other.
As there are two or more phases present in heterogeneous mixtures they can be separated by solvent extraction where in one phase is miscible with the solvent and the other phase is immiscible.
Components of a heterogeneous mixtures are distinctly visible . There are two types of heterogeneous mixtures, the colloids and the suspensions.These two vary with each other with respect to particle size.
Learn more about heterogeneous mixture,here:
https://brainly.com/question/29207752
#SPJ2
An object will float when:
Answer:
Objects with tightly packed molecules are more dense than those where the molecules are spread out
Explanation:
Answer:
it will float when
Explanation:
there is oxygen present of when the object is not dense
ild a model of ethane, CH_3CH_3CH 3 CH 3 . Looking at one of the carbon atoms, what geometry is present?
Answer:
Each carbon atom is tetrahedral
Explanation:
If we consider a model of ethane, we will quickly discover that all carbon atoms are bonded to four other atoms. This means that there are four regions of electron density around each carbon atom.
According to the valence shell electron pair repulsion theory, when a central atom has four regions of electron density on its outermost shell, the molecule must have a tetrahedral geometry.
The Length is 4 feet, the width it’s 6 feet and the height is 9 feet. what is the volume
Answer:
216 square feet is the volume
From the statements below identify all the chemical changes
Answer:
um... there are no statements below
Explanation:
I can't really help without any statements.
What would be the concentration of a solution that has 10. g of NaCl and
90. g of water?
Answer:
10%
Explanation:
I think you are looking for mass percent concentration so...
concentration = (mass of solute / total mass of solution) x 100
concentration = (10g of NaCl / (10g of NaCl + 90g of H2O) solution) x 100
concentration = 0.1 x 100
concentration = 10%
Answer:
Concentration of solution is 0.1.
Explanation:
Given data:
Mass of NaCl = 10 g
Mass of water = 90 g
Concentration of solution = ?
Solution:
Formula:
Concentration = mass of solute / total mass of solution
Now we will calculate the total mass of solution:
Total mass of solution = mass of solute + mass of solvent
Total mass of solute = 10 g + 90 g
Total mass of solute = 100 g
Now we will determine the concentration,
C = 10 g/100 g
C = 0.1
What is the wavelength in meters of a proton (mass = 1.673 x 10-24 g) that has been accelerated to 5% of the speed of light?
Explanation:
since it has been accelerated to 5℅ of the sleec of light then
v= 5/100 × (3× 10^8)
after getting velocity you'll substitute the values in the formula
de Broglie wavelength= h/mv
don't forget to change the grams in mass to kg
aorry I don't hav my calc with me
Why does hard water taste better than distilled water?
Answer:
because hard water is salty
Which is an example of a chemical change?
Water evaporating from a puddle
Cloth tearing when pulled
Wood formed sawdust when cut
Bread baking in an oven
Answer:
Its bread My guy. Maholo my dudes.
Explanation:
What is the mass in grams of 2.33 x 1020 atoms of Na?
answer and explnation on the picture if you have any quation let me know
What does the prefix centi mean?
Answer: one hundredth
Explanation:
How many significant figures are in 3.02 x 108 ?
a
2
b 4
C 5
d 3
Answer:
C
Explanation:
the answer has 5 Numbers
Which part of the experiment is not touched by the independent variable or is the normal/comparison
The volume of a beaker is 65.0 mL. What is the volume of
water that you need to fill up the beaker in cubic centimeters?
Answer
65cm^3
Explanation
1mL=1cm^3
so; 65.0mL=65cm^3
The electron configuration for P is ___.
Answer:
The Electron Configuration for Phosphorus is = 1s^2 2s^2 2p^6 3s^2 3p^3
Explanation:
Here is a sheet of paper that might help you out. You follow the red lines and where it has 3p^6 is if it is a full set. If you count the number that all of those are raised to, then you should get 15 (which is the atomic number).
Sorry, if it is horizontal instead of vertical.
Which statement best describes how electrons till orbitals in the penodic table?
Electrons fill orbitals in order of their increasing energy from left to right
o Electrons fill orbitals in order of their increasing energy from right to left
Elements fill orbitals in order of increasing energy from top to bottom in each group
Elements fill orbitals in order of increasing energy from bottom to top in each group.
Answer:
Electrons fill orbitals in order of increasing orbital energy
Explanation:
Apex
The periodic table consists of elements placed in increasing order of atomic numbers. In the table, electrons fill orbitals in increasing orbital energy. Thus, option A is correct.
What is the Aufbau principle?
The Aufbau principle states the filling of the orbitals and subshells of the atom with the electrons based on the energy levels. The electron occupies the lowest energy level.
The filling of the electron proceeds with an increase in the energy levels or the orbitals that in a periodic table increases from left to right across a horizontal row.
In a period, the number of the subshell or orbitals increases with an increase in the atomic number. The electron fills the higher energy levels after they have completely occupied the low energy levels.
Therefore, in option A. the electrons fill from an increasing order of energy levels.
Learn more about the Aufbau principle here:
https://brainly.com/question/15006708
#SPJ6
Which has greater internal energy, 1 kg of water or 1 g of water, at the same temperature?
1kg of water has greater internal energy compared to 1g of water because 1kg of water has more mass.
It takes 12.35 grams of acetic acid (CH3COOH; molar mass of 60.05 g/mol) to prepare a
1.5 M solution. What is the volume in L?
Answer:
[tex]V=0.137L[/tex]
Explanation:
Hello.
In this case, since the molarity is computed in terms of the moles of solute (acetic acid) and the volume of the solution in liters, we must first compute the moles of acetic acid by using its molar mass to subsequently compute the volume as follows:
[tex]n=12.35g*\frac{1mol}{60.05g}=0.2057mol[/tex]
[tex]M=\frac{n}{V}\\ \\V=\frac{n}{V}=\frac{0.2057mol}{1.5mol/L}\\ \\V=0.137L[/tex]
Best regards.
4. What is the dependent variable in the statement below?
If the amount of coffee that Megan drinks
before bed increases, then the amount of sleep
she gets will decrease.
A. Amount of sleep
B. Amount of coffee
C. Type of drink
D. Before bed
The liquid-phase reaction follows an elementary rate law and is carried out isothermally in a flow system. The concentrations of the A and B feed streams are 2 M before mixing. The volumetric flow rate of each stream is 5 dm3/min, and the entering temperature is 300 K. The streams are mixed immediately before entering. Two reactors are available. One is a gray, 200.0-dm^3 CSTR that can be heated to 77C or cooled to 0C, and the other is a white, 800.0-dm^3 PFR operated at 300 K that cannot be heated or cooled but can be painted red or black. Note that k = 0.07 dm^3 /mol/min at 300K and E =20 kcal/mol.
Required:
a. Which reactor and what conditions do you recommend? Explain the reason for your choice.
b. How long would it take to achieve 90% conversion in a 200-dm^3 batch reactor with after mixing at a temperature of 77C?
c. What would your answer to part (b) be if the reactor were cooled to 0C?
e kajajdjae no squo viboes we eso doadks Answer:ipao han meExplanation:no
Carbon-11 is a radioactive isotope of carbon. Its half-life is 20 minutes. What amount of the initial mass of 70.0g of C-11 atoms in a sample will be left after 80 minutes?
a)5.68 g
b)4.38 g
c)4.20 g
d)3.96 g
e)50.00 g
Answer:
Option B. 4.38 g
Explanation:
The following data were obtained from the question:
Half life (t½) = 20 mins
Original amount (N₀) = 70 g
Time (t) = 80 mins
Amount remaining (N) =.?
Next, we shall determine the decay constant. This can be obtained as illustrated below:
Half life (t½) = 20 mins
Decay constant (K) =.?
Decay constant (K) = 0.693/ half life (t½)
K = 0.693/20
K = 0.03465 min¯¹
Finally, we shall determine the amount remaining after 80 mins as follow:
Original amount (N₀) = 70 g
Time (t) = 80 mins
Decay constant (K) = 0.03465 min¯¹
Amount remaining (N) =.?
Log (N₀/N) = kt/2.303
Log (70/N) = (0.03465 × 80)/2.303
Log (70/N) = 2.772/2.303
Log (70/N) = 1.2036
Take the anti log of 1.2036
70/N = antilog (1.2036)
70/N = 15.98
Cross multiply
70 = N × 15.98
Divide both side by 15.98
N = 70/15.98
N = 4.38 g
Therefore, the amount of the isotope remaining after 80 mins is 4.38 g
How is Earth's surface most likely to change in a cold place that experiences rainfall?
A- Soil will loosen due to extensive network of tunnels.
B- Rock will break due to repeated abrasion and stress.
C- Mounds of sand will form due to deposition of sediments.
D- Cracks will appear in rocks due to freezing and thawing.
HURRRYYY!!!
Answer:
I think the answer would have to be D
Answer:
I believe it is C
Explanation:
If I am wrong give me 1 star
All cells must have energy to function. Most of the energy used by the cells in your body is produced by cellular respiration. In cellular respiration, cells use ____________ to release energy stored in __________.
Answer:
In cellular respiration, cells use oxygen to release energy stored in glucose.
If my answer helped, please mark me as the brainliest!!
Thank You!!
Answer:oxygen and sugars
Explanation:
Determine whether or not each chemical formula is an empirical formula. CaCO3 Choose... C6H12O6 Choose... NaMnO4 Choose... Ba3(PO4)2 Choose... K2C2O4 Choose...
Answer:
CaCO3: empirical.
C6H12O6: not empirical.
NaMnO4: empirical.
Ba3(PO4)2: empirical.
K2C2O4: not empirical.
Explanation:
Hello.
In this case, since the empirical formula of a chemical compound is the smallest whole number ratio of atoms of each element in the compound, for each compound we proceed as follows:
CaCO3: it is empirical since the subscripts there cannot be reduced anymore.
C6H12O6: not empirical since the smallest whole number ratio of atoms would be CH2O.
NaMnO4: it is empirical since the subscripts there cannot be reduced anymore.
Ba3(PO4)2: it is empirical since the subscripts there cannot be reduced anymore.
K2C2O4: not empirical since the smallest whole number ratio of atoms would be KCO2.
Best regards.
The chemical formula that are empirical and not empirical are:
[tex]CaCO_3[/tex]- empirical[tex]C_6H_{12} O_6[/tex]- not empirical[tex]NaMnO_4[/tex]- empirical[tex]Ba_3(PO_4)_2[/tex]- empirical[tex]K_2C_2O_4[/tex]- not empiricalEmpirical formulaA chemical compound's empirical formula is the smallest whole-number ratio of atoms of each element in the compound.
[tex]CaCO_3[/tex]: it is empirical since the subscripts there cannot be reduced anymore.
[tex]C_6H_{12} O_6[/tex]: not empirical since the smallest whole number ratio of atoms would be [tex]CH_2O[/tex]
[tex]NaMnO_4[/tex]: it is empirical since the subscripts there cannot be reduced anymore.
[tex]Ba_3(PO_4)_2[/tex]: it is empirical since the subscripts there cannot be reduced anymore.
[tex]K_2C_2O_4[/tex]: not empirical since the smallest whole number ratio of atoms would be [tex]KCO_2[/tex]
Find more information about the empirical formula here,
brainly.com/question/1247523
Matter includes all of the following except
Not everything is matter. Here's a list of what we call NON-MATTER.
___________________________________________________________
Non matter...
LightHeatSound___________________________________________________________
Hope it helps!
May i have brainliest?
[tex]\huge\boxed{Thanks,\;Plip.}[/tex]
1. Warm air puts more pressure on Earth than cooler air does.
True
False
Answer:
false I think, but not so sure
The greater the amount of matter that is packed into a given space the greater the
Answer:
density
Explanation: