Answer:
D. Pacific plate
Explanation:
took the quiz
A ball is rolling down a hill. Wich action would slow the ball down?
what does chucking do for your memory
Answer:
By separating disparate individual elements into larger blocks, information becomes easier to retain and recall. This is due mainly to how limited our short-term memory can be. ... Chunking allows people to take smaller bits of information and combine them into more meaningful, and therefore more memorable, wholes.
A molecule with a charge of 9 x 10-8 C is moving with a velocity of 7 x 107 m/s perpendicular to a magnetic field with a value of 0.57 Tesla. What is the magnitude force (in N) on the molecule?
Answer:
3.591 N
Explanation:
Applying,
F = Bvq................. Equation 1
Where F = magnitude of force on the molecule, B = Magnetic field, v = Velocity of the molecule, q = charge of the molecule.
From the question,
Given: B = 0.57 Tesla, q = 9×10⁻⁸ C, v = 7×10⁷ m/s
Substitute these values into equation 1
F = 0.57×9×10⁻⁸×7×10⁷
F = 35.91×10⁻¹
F = 3.591 N
Hence the force on the molecule is 3.591 N
Calculate the net force for each of the following:
a.
20 N to the right and 30 N to the right:
Answer and Explanation:
A.
There would be a net force of 50 N going to the right.
Since both forces are going right, they add onto the force amount.
#teamtrees #PAW (Plant And Water)
Aliyah and Kofi are in the middle of a rally. Aliyah hits the ball to the right side of the court as Kofi is moving to the left side of the court. Kofi must
change directions quickly and stretch his arm to be able to return the ball, which combination of skill-related and health-related components of fitness
must he use?
O Agility and Flexibility
O Balance and Cardiorepiratory Endurance
O Power and Muscular Strength
O Reaction Time and Muscular Endurance
Answer:
Agility and Flexibility.
Explanation:
Agility for change of direction and Flexibility to stretch his arm
2. An advertisement claims that a new type of cotton cloth looks red because of the way the cloth is
woven and not because of the dye used on the cloth.
Which statement BEST explains why the chemical dye is responsible for the red appearance of the
cloth?
ооо
O A. The chemical absorbs the light from the visible spectrum except for red that is reflected to the
eye.
B. The chemical absorbs all the red light from the visible spectrum that is reflected to the eye.
C. The light is refracted and the longest wavelength shows through the one that is red.
OD. The chemical reaction produces a red light that is emitted, so the cloth looks red.
HELP PLEASEE
when a person receives an electric shock from wires , is he most affected by a spark, corona, arc or humus solution?
Answer:
Usually an eletric shock. You can be left with numbness and MAYBE problems with your eyes.
Explanation:
A 3-m-diameter tank is initially filled with water 2 m above the center of a sharp-edged 10-cm-diameter orifice. The tank water surface is open to the atmosphere, and the orifice drains to the atmosphere through a 100-m-long pipe. The friction coefficient of the pipe is taken to be 0.015 and the effect of the kinetic energy correction factor can be neglected. Determine (a) the initial velocity from the tank (5 points); and (b) the time required to empty the tank (5 points). (Q.8-78, E-book)
Answer:
a) 1.542 m/s
b) t = 38.91 mins
Explanation:
Given data:
Diameter of tank ( D ) = 3 m
height of tank ( initial ) ( h = z1 ) = 2m
Diameter of sharp edged orifice = 0.1 m
pipe length ( L ) = 100 m
coefficient of friction of pipe ( f ) = 0.015
∝1 = ∝2 = 1
A) calculate initial velocity from the tank
since the fluid is open to the atmosphere ; p1 = p2 = Patm ( atm pressure )
the initial velocity of the tank can be determined with the equation below
V = [tex]\sqrt{\frac{2gZ1}{1 + f \frac{L}{d} + K _{L} } }[/tex] ---- ( 1 )
where : Z1 = 2m , f = 0.015, L = 100m , Kl = 0.5m , d = 0.1 m , g = 9.81m/s^2
input given values into equation 1 above
V = 1.542 m/s
b) Determine time required to empty tank
Given velocity = [tex]\sqrt{\frac{2gZ1}{1 + f \frac{L}{d} + K _{L} } }[/tex] and Flow rate = [tex]\sqrt{\frac{2gZ1}{1 + f \frac{L}{d} + K _{L} } }* \frac{\pi }{4} *d^2[/tex]
differentiate the flow rate ( dt ) and then integrate the equation to get the required expression
t = [tex]\frac{2D^2}{d^2} \sqrt{\frac{(1+f\frac{L}{d}+K_{L})Z_{1} }{2g} }[/tex] -------- ( 2 )
where : : Z1 = 2m , f = 0.015, L = 100m , Kl = 0.5m , d = 0.1 m , g = 9.81m/s^2, D = 3m
input values into equation 2
t = 38.91 mins
You are pulling with 57 N on a heavy bookshelf, but the bookshelf doesn't move. What is the force of static friction in Newtons acting on the bookshelf?
Answer:
57N
Explanation:
Since the bookshelf isn't moving, the force you're exerting on the shelf must be equal to the force of static friction
So the force of static friction is 57N
Which machine do you think will last longer, the traditional battery and motor, or the free energy machine?
Answer:
it will most likely be the free energy
A coaxial cable consists of an inner cylindrical conductor of radius 3 cm on the axis ofan outer hollow cylindrical conductor of inner radius 7 cm and outer radius of 10 cm.The inner conductor carries current 4.5 A in one direction, and the outer conductor carries current 8 A in the opposite direction. What is the value of the magnetic field atfollowing distances from the axis of the cable:
Answer:
Hello your question lacks some information and that is the distance
At r = 0.150 m (outside the cable) note : (μ 0 = 4π × 10-7 T · m/A)
answer: 4.7 * 10^-6 T
Explanation:
R1 = 0.03 m
R2 = 0.07 m
R3 = 0.1 m
Inner conductor carries current = 4.5A in one direction
outer conductor carries current = 8A in opposite direction
Determine the value of magnetic field at r = 0.150 m
net current = 8 - 4.5 = 3.5 A
∴ β ( value of magnetic field )
= ( 4π * 10^-7 * 3.5 ) / ( 2π * 0.150 )
= 4.4*10^-6 / 0.94
= 4.7 * 10^-6 T
Calculate the work done to push a 200-N object 5-meters
Why do astronomers use frequencies other than the visible ones when they are
investigating the universe?
Consider the reaction below Na2CO3 (aq) + CaCl2 (aq) CaCO3 (s) + 2NaCl (aq) If the releases 39.4 kJ of energy, how many kilocalories does it release? (1 cal = 4.184 J) (Round off answer to 2 decimal place)
Answer: 9.42
Explanation: yes
List the two factors that create orbital motion and describe how each factor affects the motion.
A 1.50x103-kilogram car is traveling east at 30 meters per second.
The brakes are applied and the car is brought to rest in 9.00 seconds.
A. Calculate the magnitude of the total impulse applied to the car to
bring it to rest. [Show all work, including the equation and
substitution with units.]
B. State the direction of the impulse applied to the car. [East or
West?]
PLEASE HELP!!!!
Answer:
[tex]39000\ \text{kg m/s}[/tex]
West
Explanation:
m = Mass of car = [tex]1.3\times 10^{3}\ \text{kg}[/tex]
t = Time = 9 seconds
u = Initial velocity = 30 m/s
v = Final velocity = 0
Impulse is given by
[tex]J=m(v-u)\\\Rightarrow J=1.3\times 10^3(0-30)\\\Rightarrow J=-39000\ \text{kg m/s}[/tex]
The magnitude of the total impulse applied to the car to bring it to rest is [tex]39000\ \text{kg m/s}[/tex].
The direction is towards west as the sign is negative.
Calculate the speed of an object that travels 75m in 15s.
Answer:
5m/s
Explanation:
speed=distance/time
=75/15
=5m/s
6.) What is
the voltage
across a 50
ohm circuit
element that
draws a current of 2 A?
Answer:
100 V
Explanation:
Hi there!
Ohm's law states that [tex]V=IR[/tex] where V is the voltage, I is the current and R is the resistance.
Plug the given information into Ohm's law (R=50, I=A)
[tex]V=IR\\V=(2)(50)\\V=100[/tex]
Therefore, the voltage across this current is 100 V.
I hope this helps!
Question 1 of 10 The energy diagram shows the changes in energy during a chemical reaction. Which statement best describes the total energy change of the system? Potential energy Reaction progress O A. Energy is absorbed, and the products have higher potential energy. O B. Energy is absorbed, and the reactants have higher potential energy C. Energy is released, and the reactants have higher potential energy. O D. Energy is released, and the products have higher potential energy.
Answer: The Answer is C
Explanation:
I just got this question and took a guess I got it correct lol. Higher potential energy and energy is released.
The statement which best describes the total energy change of the system is energy is absorbed, and the reactants have higher potential energy.
What is potential energy?Potential energy is the energy which a body posses because of its position. The potential energy is the stored energy.
The energy diagram shows the changes in energy during a chemical reaction.
Potential energy and Reaction progress are shown in the problem. The reactants are the substance which reacts and form one or more than one product.
The reactants in a chemical reaction increases the potential energy for the reaction.
Thus, the statement which best describes the total energy change of the system is energy is absorbed, and the reactants have higher potential energy.
Learn more about the potential energy here;
https://brainly.com/question/15896499
Brent’s doctor recommended that he avoid hot baths while he and his wife are trying to have a child. Why did the doctor most likely make this recommendation?
Exposing the testicles to high temperatures could lead to problems
with maintaining erections.
Exposing the testicles to high temperatures could lead to problems
with producing sperm.
Exposing the testicles to high temperatures could lead to problems
with ejaculating.
Exposing the testicles to high temperatures
Answer:
Exposing the testicles to high temperatures could lead to problems
with producing sperm.
Explanation:
got it correct on the edge unit test review
Brent's doctor most likely recommended that he avoid hot baths because exposing the testicles to high temperatures could lead to problems with producing sperm.
What is sperm?The sperm is the male reproductive cell that is produced in the testes and stored in the epididymis.
The testicles (testes) of the male is located outside the body as the temperature of the body is too high for the viability of the sperm.
Therefore, exposing the testicles to high temperatures could lead to problems with producing sperm.
Learn more about sperm here:
https://brainly.com/question/25282799
#SPJ2
How do scientists know the continents were once closer than they are today? Explain your answer in 2-3 complete sentences.
Answer:
Continental drift describes one of the earliest ways geologists thought continents moved over time. Today, the theory of continental drift has been replaced by the science of plate tectonics.
The theory of continental drift is most associated with the scientist Alfred Wegener. In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other. He called this movement continental drift.
WHY ARE ALL GIRLS THE SAME, don't even say their not cause if you say that then I guess you don't have a life!!!!!
explain why when water is poured on a dry class slab it spreads uniformly but it forms spherical droplets on a waxed glass slab
Answer and Explanation:
The texture of the slabs affects the type of bonding the water molecules has with each other.
The dry glass slab allows the water to form cohesive bonds with each other, making the water stick to itself and not the slab, which makes it flow uniformly, or regularly.
The Waxed glass slab has a different texture that forms an adhesive-type bonding with water, making the water stick to the slab at certain parts/forming the spherical droplets.
#teamtrees #PAW (Plant And Water)
What is the frequency of a wave that has a speed of 500 m/s and a wavelength of 12m?
Answer:
41.7 Hz
Explanation:
Wavelength= velocity/frequency
or
frequency= velocity/Wavelength
f=500/12
f=41.6666
f=41.7 Hz
Please like and rate. Tnks
Which has the least gravitational force?
Answer: Mount Nevado Huascarán
Explanation: Mount Nevado Huascarán in Peru has the lowest gravitational acceleration, at 9.7639 m/s2, while the highest is at the surface of the Arctic Ocean, at 9.8337 m/s2
gravitational potential is the energy due to an object's:
a. motion
b. spring stretch or compression
c. position in a gravity field
d. chemical bonds.
position in a gravitation field (c)
Answer:
The answer is C. position in a gravity field
Constructive interference in wave patterns causes an increase in which measurement associated with waves and vibrations?
A. period
B. frequency
C. speed
D. amplitude
E. wavelength
Constructive interference in wave patterns causes an increase in amplitude measurement associated with waves and vibrations.
What is constructive interference?When two waves move in the same direction and are in phase with each other, their amplitudes are summed to produce the resultant wave.
The waves are considered to have suffered constructive interference in this case. Upward displacement occurs when waves experience constructive interference.
The medium's upward displacement is higher than the displacement of the two interfering pulses.
Hence option D is correct.
To learn more about the constructive interference refer to the link;
https://brainly.com/question/16098226
Which property of light is a constant in a vacuum?
Answer:
La velocidad de la luz en el vacío es una constante universal con el valor de 299 792 458 m/s (186 282,397 mi/s),aunque suele aproximarse a 3·108 m/s. Se simboliza con la letra c, proveniente del latín celéritās (en español, celeridad o rapidez).
¿Cuál es la consecuencia que a velocidad de la luz sea constante?
Respuesta. En modificaciones del vacío más sutiles, como espacios curvos, efecto Casimir, poblaciones térmicas o presencia de campos externos, la velocidad de la luz depende de la densidad de energía de ese vacío.
Select the correct answer.
Which graph shows the correct relationship between kinetic energy and speed?
Answer:
D
Explanation:
Kinetic energy = 1/2mV^2
From the formula above, we can deduce that kinetic energy is proportional to the square of speed. That is,
K.E = V^2
Graphically, the relationship isn't linear but a positive exponential. Therefore, option D is the correct answer.
Answer:
Its D
Explanation:
why does ice melt faster in water than in oil when both liquids are at the same temperature
Answer:
Because water has a high specific heat, each little bit of water flowing past can give lots of thermal energy to the ice cube. Oil has a smaller specific heat, and so more oil has to flow past to give the same amount of heat energy to the ice cube. ... Colder oil will melt ice less rapidly than warmer oil or water