In which parts of the table do you find the greatest and lowest attraction for electrons?​

The correct answer is a.) As surface area increases, the time necessary for complete dissolution decreases.

This is because the rate of dissolution is proportional to the surface area of the solute exposed to the solvent. When the surface area of the solute is increased, the solvent molecules have more area to come into contact with the solute and dissolve it. Increasing the surface area of a solid solute increases the area available for solvent molecules to interact with the solute. Therefore, the solute particles dissolve faster, and the time necessary for complete dissolution decreases. This is why substances are often ground into smaller particles to increase their surface area, which enhances their solubility and dissolution rate.

To learn more about solvent visit;

https://brainly.com/question/11985826

#SPJ4

Answer:

True

Explanation:

(with a manganese dioxide catalyst)

6.53 1026 formula units of  [tex]\rm Cr_3(PO_4)_2[/tex] are contained in roughly 32.45 moles of  [tex]\rm Cr_3(PO_4)_2[/tex].

We may use the following procedures to determine how many atoms make up the 32.45 moles of [tex]\rm Cr_3(PO_4)_2[/tex]:

Using Avogadro's number, which is the number of particles (atoms, molecules, or ions) per mole of a substance, we may convert from moles to the number of particles. There are roughly [tex]6.022 \times 10^{23[/tex] particles per mole according to Avogadro's number.

Hence, we can perform the following computation to convert 32.45 moles of  [tex]\rm Cr_3(PO_4)_2[/tex] to the quantity of  [tex]\rm Cr_3(PO_4)_2[/tex]'s formula units (ions):

32.45 mol [tex]\rm Cr_3(PO_4)_2\times 6.022 \times 10^{23[/tex] formula units/mol = [tex]1.955 \times 10^{25[/tex] formula units [tex]\rm Cr_3(PO_4)_2[/tex]

to know more about moles here:

brainly.com/question/26416088

#SPJ1

The molecule that would be expected to be a free radical is NO, A free radical is a molecule or atom that contains an unpaired electron in its outermost orbital. The correct option is D.

This unpaired electron makes the molecule highly reactive and prone to forming chemical bonds with other molecules in order to gain an electron and become stable.

Free radicals are often involved in chemical reactions that produce oxidative stress, which can damage cells and contribute to the development of diseases such as cancer, heart disease, and neurodegenerative disorders.

NO, is a free radical because it contains an unpaired electron in its outermost orbital. CO2, CO, and N2O do not contain unpaired electrons and are not free radicals.

For more details about molecule click here:

https://brainly.com/question/28931982#

#SPJ11

Answer:

B. 2 electrons are removed from the atom

Explanation:

The charge of an ion of calcium (Ca) is +2, which means that the calcium atom has lost 2 electrons.

Therefore, the correct answer is B. 2 electrons are removed from the atom.

The balanced equation is NaI  → Na⁺ + I⁻, the entropy change is greater for the dissolution of NaI compared to the dissolution of NaBr is iodide has weaker ion-dipole interactions with water than bromide. Option D is correct, the change in free energy is  -16.4 kJ/mol, and  the dissolution of 1.00 mol of NaBr at 298.15 K is -4.07 kJ/mol.

The Balanced equilibrium equation for the dissolution of NaI in water:

NaI (s) → Na⁺ (aq) + I⁻ (aq)

Iodide having a weaker ion-dipole interactions with water than bromide. This is because the larger size of iodide ion causes weaker electrostatic interactions with water molecules compared to bromide ion. Thus, it requires more disorder or randomness to offset the loss of organization and ordering of water molecules. This results in a higher entropy change for the dissolution of NaI compared to NaBr.

ΔG° = ΔH° - TΔS°

ΔG° = (-7.50 kJ/mol) - (298.15 K)(74.0 J/mol.K)(1.02 mol)

ΔG° = -16.4 kJ/mol

The dissolution of 1.00 mol of NaBr at 298.15 K can be calculated using the following equation:

ΔG° = -RT ln(K)

where R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant for the dissolution of NaBr in water.

Since NaBr is a strong electrolyte, it will dissociate completely in water:

NaBr (s) → Na⁺ (aq) + Br- (aq)

The equilibrium constant expression is:

K = [Na⁺][Br⁻]

At equilibrium, the concentration of Na⁺ and Br⁻ will be equal, so:

K = [Na⁺]²

The solubility of NaBr at 298.15 K is 90.7 g/L, which can be converted to mol/L:

90.7 g/L x (1 mol/102.89 g) = 0.881 mol/L

Therefore, [Na+] = [Br-] = 0.881 mol/L, and K = (0.881 mol/L)^2 = 0.775 mol/L.

Plugging in the values:

ΔG° = -8.314 J/mol.K x 298.15 K x ln(0.775 mol/L)

= -4.07 kJ/mol

To know more about entropy change here

https://brainly.com/question/4526346

#SPJ4

The correct option among the following is (c) it includes the balanced chemical reaction and the change in enthalpy value is true of a thermochemical equation.

A thermochemical equation is a chemical equation that depicts the complete thermochemical reaction. It contains the balanced equation and a written interpretation of the net energy change.

The term "enthalpy of reaction" refers to the heat energy released or absorbed in a chemical reaction at a constant pressure.

Thermochemical equations are written in the same way as chemical equations, with the exception that they also include the change in enthalpy value (ΔH) for the reaction.

The change in enthalpy value reflects the energy absorbed or released by the reaction in the form of heat.

To know more about enthalpy, refer here:

https://brainly.com/question/13996238#

#SPJ11

We can draw the conclusion that compared to dimension measurements, mass readings had a smaller effect on the CV of the measured density.

To determine the contribution of mass and dimensions on the coefficient of variation (CV) of the calculated density, we can calculate the CV for both mass and dimension measurements separately for the lightest object.

Let's assume that the mass of the lightest object is 0.5 g and its shortest dimension is 1.0 cm. The CV for mass can be calculated as follows:

CV for mass = (standard deviation of mass / mean mass) x 100%

CV for mass = (0.002 g / 0.5 g) x 100%

CV for mass = 0.4%

Similarly, the CV for dimension can be calculated as follows:

CV for dimension = (standard deviation of dimension / mean dimension) x 100%

CV for dimension = (0.01 cm / 1.0 cm) x 100%

CV for dimension = 1.0%

From these calculations, we can see that the CV for mass is lower than the CV for dimension, indicating that mass measurements are more precise than dimension measurements for this particular object.

Therefore, we can conclude that mass measurements had a lesser impact on the CV of the measured density compared to dimension measurements. This is because the contribution of mass measurement uncertainty to the overall CV is lower than that of the dimension measurement uncertainty.

To learn more about CV for mass  refer to:

brainly.com/question/13304516

#SPJ4

The single replacement reaction between bromine (Br₂) and sodium chloride (NaCl) will occur.

Bromine is a more reactive halogen than chlorine, and it can displace chlorine from its compound. The balanced chemical equation for the reaction is:

Br₂ + 2NaCl → 2NaBr + Cl₂

In this reaction, bromine replaces chlorine to form sodium bromide and chlorine gas. The reaction occurs because bromine is more reactive than chlorine, and it has a higher tendency to gain an electron to form a bromide ion.

Sodium chloride contains positively charged sodium ions and negatively charged chloride ions. When bromine is added to sodium chloride, it reacts with chloride ions to form sodium bromide and chlorine gas. Sodium bromide is an ionic compound that contains positively charged sodium ions and negatively charged bromide ions.

Chlorine gas is a diatomic molecule that contains two chlorine atoms covalently bonded together.

To know more about replacement reaction, visit :

https://brainly.com/question/15995721

#SPJ1

The concentration of a solution can be expressed quantitatively through the concept of molarity.

The number of moles of solute present in one liter of the solution is called molarity (M). It is a quantitative measure of the concentration of a solution. The following formula is used to calculate the molarity of a solution:

In other words, molarity is a measure of how many moles of solute are dissolved in one liter of the solution. It is generally expressed in moles per liter (mol/L). For example, a 0.1 M solution of sodium chloride means that there are 0.1 moles of sodium chloride present in one liter of the solution.

Molarity is an important concept in chemistry as it is used to determine the amount of a chemical substance in a solution. It is widely used in chemical reactions, stoichiometry, and in the calculation of pH, equilibrium constants, and other important chemical properties. It is also a useful measure in analytical chemistry and in the preparation of reagents for scientific experiments. Molarity plays a significant role in many areas of chemistry, including biochemistry, medicinal chemistry, and environmental chemistry.

Learn more about Molarity: https://brainly.com/question/23051191

#SPJ11

The 100.0 mL sample of the 0.20 M HF is titrated with the 0.10M KOH. The pH of the solution after the addition of the 300.0 mL of KOH is 12.40.  The correct option is A.

The chemical equation  is as :

HF(aq) + KOH(aq) ------> KF(aq) + H2O(l)

Number of the moles of HF =  100.0/1000 L × 0.20 M

                                              = 0.02 moles

Number of the moles of KOH = 300/1000 L ×  0.10 M

                                                 = 0.03 moles

The acid is in excess then we have to find the concentration of the excess acid.

The Number of the moles of excess acid =  0.02 moles -  0.03 moles

                                                             = 0.01 moles

Total volume of solution = 100.0 mL + 300 mL

                                         = 400 mL or 0.4 L

Concentration of excess acid = 0.01 moles/0.4 L

                                                 = 0.025 M

pOH = -log[OH⁻]

pOH = -log[ 0.025 M]

pOH = 1.60

pH = 14 - 1.60

pH = 12.40

The correct option is A.

To learn more about pH here

https://brainly.com/question/15289741

#SPJ4

The two common regenerated fibers are viscose rayon and lyocell. Both viscose rayon and lyocell have similar properties to natural fibers such as cotton and silk, but with the added benefit of being more affordable and easier to produce in large quantities.

Viscose rayon is a regenerated cellulose fiber made from wood pulp or cotton linters, and it has been used in the textile industry since the early 1900s. The manufacturing process involves dissolving the wood pulp or cotton linters in a chemical solution to form a viscous solution, which is then extruded through a spinneret and solidified into fibers.

Lyocell, also known as Tencel, is a newer type of regenerated cellulose fiber made from wood pulp, usually from eucalyptus trees. The manufacturing process for lyocell is more environmentally friendly than that of viscose rayon, as it uses a closed-loop process that recycles the solvent used in the production process. The resulting fibers are strong, durable, and moisture-absorbent, making them popular for use in clothing and textiles.

to know more about natural fibers, visit: brainly.com/question/9318560

#SPJ4

The existence of a carbonyl group in the unidentified chemical is indicated by the signal at 170 ppm in the 13C NMR spectra.

It displays the four anticipated signals one for each of the carbonsas expected.

Four carbons and four peaks are present. No two carbons exist in the same environment exactly. The peak at slightly over 50 must be a carbon with a single bond connecting it to an oxygen.

To know more about carbon visit:-

https://brainly.com/question/22530423

#SPJ1

A and B Did an acid donate a hydrogen ion to become a conjugate acid? Did a base accept a hydrogen ion to become a conjugate base? should be asked to determine if the reaction supports the Brønsted-Lowry model of acids and bases.

In the Bronsted-Lowry hypothesis, proton transport between chemical species is used to characterize acid-base interactions. Any species that can transfer a proton, H, is a Bronsted-Lowry acid and a base is any species that can accept a proton. Based on whether a species receives or donates protons or H+, the Bronstad-Lowry acid-base theory (also known as the Bronsted Lowry theory) distinguishes between strong and weak acids and bases. The hypothesis states that when an acid and base interact, the acid forms its conjugate base and the base forms its conjugate acid by exchanging a proton.

Learn more about Brønsted-Lowry model here:

https://brainly.com/question/28145336

#SPJ4

3.206 x 10^23 atoms of silver are required to form 65.0 g of silver sulfide.

To determine how many atoms of silver are necessary to form 65.0 g of silver sulfide, we first need to calculate the number of moles of silver sulfide present in 65.0 g of the compound using its molar mass.

The molar mass of silver sulfide (Ag2S) can be calculated by summing the atomic masses of its constituent atoms:

Molar mass of Ag2S = (2 x atomic mass of Ag) + atomic mass of S

= (2 x 107.87 g/mol) + 32.06 g/mol

= 243.8 g/mol

Now we can calculate the number of moles of Ag2S present in 65.0 g of the compound:

Number of moles of Ag2S = mass of Ag2S / molar mass of Ag2S

= 65.0 g / 243.8 g/mol

= 0.2665 mol

From the chemical formula of silver sulfide (Ag2S), we know that 2 moles of silver are required to form 1 mole of Ag2S. Therefore, we can use this stoichiometric ratio to calculate the number of moles of silver required:

Number of moles of Ag = 2 x number of moles of Ag2S

= 2 x 0.2665 mol

= 0.5330 mol

Finally, we can use Avogadro's number (6.022 x 10^23) to convert the number of moles of silver to the number of atoms of silver:

Number of atoms of Ag = number of moles of Ag x Avogadro's number

= 0.5330 mol x 6.022 x 10^23 atoms/mol

= 3.206 x 10^23 atoms

Therefore, 3.206 x 10^23 atoms of silver are required to form 65.0 g of silver sulfide.

learn more about silver sulfide here

https://brainly.com/question/29245072

#SPJ1

The given statement "The point at which indicator undergoes color change is called end point titration. " is True.

The endpoint of a titration is the point at which the indicator being used undergoes a color change, indicating that the reaction between the analyte and the titrant is complete. The choice of indicator depends on the nature of the reaction being studied and the pH range in which the reaction occurs. The indicator is selected such that its color changes at the pH at which the reaction is complete. For example, phenolphthalein is commonly used as an indicator in acid-base titrations because it changes from colorless to pink in the presence of a base, indicating the endpoint of the titration.

To know more about phenolphthalein, here

brainly.com/question/14804470

#SPJ4

Assuming that all the salt content in the deluxe hamburger is from sodium chloride, then the amount of sodium chloride contained in the hamburger is 2.5 grams.

Salt is composed of sodium chloride (NaCl), and the salt content listed in the deluxe hamburger refers to the amount of NaCl in the hamburger. Therefore, to determine the amount of sodium chloride, we simply use the given salt content value.

Salt content = 2.5 g

Sodium chloride is about 40% sodium by weight (the rest is chloride)

Therefore, the amount of sodium in 2.5 g of sodium chloride is:

2.5 g x 0.40 = 1.0 g

One mole of sodium weighs 22.99 g

Therefore, the number of moles of sodium in 1.0 g is:

1.0 g / 22.99 g/mol = 0.0435 mol

One mole of sodium chloride weighs 58.44 g

Therefore, the number of moles of sodium chloride in 0.0435 mol of sodium is:

0.0435 mol x (1 mol / 1 mol of NaCl) = 0.0435 mol of NaCl

Finally, the mass of sodium chloride in the hamburger is:

0.0435 mol x 58.44 g/mol = 2.54 g

So, there are approximately 2.54 g of sodium chloride in the fast-food deluxe hamburger.

To know more about sodium chloride, refer here:

https://brainly.com/question/29133552#

#SPJ11

The equivalent of 2.05 moles of Fe can be created from 4.1 moles of CO.

The balanced chemical equation for the reaction between CO (carbon monoxide) and Fe₂O₃ (iron(III) oxide) is:

3CO + Fe₂O₃ → 2Fe + 3CO₂

From the equation, we can see that 3 moles of CO reacts with 1 mole of Fe₂O₃ to produce 2 moles of Fe. Therefore, we can set up a proportion:

3 moles of CO / 1 mole of Fe₂O₃ = 2 moles of Fe / 1 mole of Fe₂O₃

Simplifying the proportion, we get:

3 moles of CO = 2 moles of Fe

Now, we can use this proportion to calculate the number of moles of Fe that can be formed from 4.1 moles of CO:

2 moles of Fe = (3 moles of CO / 1 mole of Fe₂O₃) x 4.1 moles of CO

2 moles of Fe = 12.3 moles of CO / mole of Fe₂O₃

Therefore, the number of moles of Fe that can be formed from 4.1 moles of CO is: 2.05 moles of Fe

To learn more about moles refer to:

brainly.com/question/26416088

#SPJ4

In the bromination process, the intermediate step is the formation of a bromonium ion.

Bromination is the process of introducing bromine into a molecule. When an alkene is reacted with bromine, the alkene will undergo electrophilic addition. The addition of bromine to an alkene is an example of an electrophilic addition reaction. This is because the bromine molecule acts as the electrophile during the reaction. The electrophilic addition process can be broken down into three steps:

Step 1: The pi electrons in the alkene are attracted to the partially positive bromine.

Step 2: The pi electrons from the alkene form a bond with one of the bromine atoms.

Step 3: The bromine-bromine bond is broken and a bromine atom attaches to each of the carbon atoms.

The formation of a bromonium ion is the intermediate step in the bromination process. The bromonium ion is a three-membered ring that contains a positively charged bromine atom. The bromonium ion is formed because the bromine molecule is not polarized enough to react directly with the pi electrons in the alkene. Instead, the bromine molecule is polarized by a solvent, such as water or acetic acid.

The polarized bromine molecule then acts as an electrophile and reacts with the alkene to form a bromonium ion. The bromonium ion is highly reactive and will react with a nucleophile, such as water or bromide ion, to form a vicinal dihalide.

To know more about electrophilic addition, visit: https://brainly.com/question/28348492
#SPJ11

A compound that can convert a mixture of two enantiomers and diastereomers by reacting with them is called a resolving agent.

Resolving agents are typically chiral compounds that have the ability to selectively interact with one enantiomer or diastereomer in a mixture, leading to the formation of a product that can be separated from the remaining unreacted enantiomer or diastereomer.

Resolving agents can be used in a variety of applications, such as in the synthesis of chiral compounds, the separation of racemic mixtures into their individual enantiomers, and the determination of the absolute configuration of chiral compounds. Common examples of resolving agents include enzymes, chiral metal complexes, and chiral organic molecules such as tartaric acid and its derivatives.

Overall, the use of resolving agents is an important tool in the field of stereochemistry, allowing for the manipulation and separation of chiral compounds in a wide range of applications.

To learn more about enantiomers refer to:

brainly.com/question/21506956

#SPJ4

The total energy absorbed by the sample is 34276m + 30075.2 J.

The heat of fusion is the amount of heat required to melt one unit of mass of a substance at its melting point without a change in temperature.

The heat of vaporization is the amount of heat required to vaporize one unit of mass of a substance at its boiling point without a change in temperature.

To calculate the energy absorbed by the sample, we need to know the mass of the sample and the temperature changes it undergoes. Assuming the sample starts as a solid at a temperature of -20°C, is heated to its melting point, melted, then heated to its boiling point, and finally vaporized, the calculations are as follows:

Energy absorbed to heat the sample from -20°C to 0°C:

Q = m * C * ΔT

Q = m * 1.56 J/g°C * (0°C - (-20°C))

Q = 31.2 * m J

Energy absorbed to melt the sample at 0°C:

Q = m * Hfus

Q = 107 J/g * 31.2 g

Q = 3338.4 J

Energy absorbed to heat the sample from 0°C to 100°C:

Q = m * C * ΔT

Q = m * 3.11 J/g°C * (100°C - 0°C)

Q = 311 * m J

Energy absorbed to vaporize the sample at 100°C:

Q = m * Hvap

Q = 854 J/g * 31.2 g

Q = 26636.8 J

Energy absorbed to heat the sample from 100°C to 200°C:

Q = m * C * ΔT

Q = m * 0.988 J/g°C * (200°C - 100°C)

Q = 98.8 * m J

Total energy absorbed:

Qtotal = 31.2m + 3338.4 + 311m + 26636.8 + 98.8m

Qtotal = 34276m + 30075.2 J

Learn more about heat of fusion here:

https://brainly.com/question/14053504

#SPJ1

Answer: 63.92%

Explanation:

159.62 / 249.72 * 100 = 63.92. This means that a 100-gram sample of copper sulfate pentahydrate will contain 63.92 grams of copper sulfate. I hope this helps!

The two gases that are the essential drivers of acid deposition are sulfur dioxide (SO2) and nitrogen oxides (NOx).

These gases collaborate in the atmosphere to frame fine sulfate and nitrate particles that can be transported significant distances by winds and breathed profoundly into individuals' lungs.

Some sources of sulfur dioxide incorporate the consumption of fossil fuels such as coal, oil, and natural gas, petrol refineries, concrete assembling, paper mash production, metal smelting and processing facilities, and volcanic eruptions.

Sulfur dioxide can irritate the nose, throat, and airways causing hacking, wheezing, shortness of breath, or a tight searching of the chest. High concentrations of SO2 can cause inflammation and irritation of the respiratory system. Individuals with lung diseases such as asthma, constant bronchitis, and emphysema are for the most part more sensitive to sulfur dioxide. Youngsters are at higher risk from SO2 exposure because their lungs are still creating. Exposure to sulfur dioxide might irritate the eyes, nose, and throat.

to know more about Sulfur dioxide click here:

https://brainly.com/question/15654465

#SPJ4

Answer:

4NH3 + 5O2 --> 4NO + 6H2O

Explanation:

Balance the elements one at a time to get each value.

When a diprotic acid is titrated with a strong base, and the Ka1 and Ka2 are significantly different, then the pH vs. volume plot of the titration will have two distinct equivalence points. Thus, the correct answer is option C. For diprotic acids, the two acidic hydrogens (H+) are not lost at the same pH value.

The titration of a diprotic acid with a strong base yields two distinct pH curves as shown in the figure. The plot is also called a two-stage titration graph. The plot is divided into two stages because of the two dissociation steps of the diprotic acid. Titration curve for a diprotic acid. The curve has two equivalence points.

The first equivalence point corresponds to the reaction of the first hydrogen ion (H+) from the diprotic acid with the strong base. The pH at the first equivalence point is generally less than 7 because the salt of the weak acid is an acidic solution.

The second equivalence point occurs when all of the hydrogens have been neutralized. The pH at the second equivalence point is greater than 7 because the salt of the weak acid is a basic solution.

For more details about diprotic click here:

https://brainly.com/question/9434046#

#SPJ11

Answer: A is better trust me I qualified my sats

Explanation:

ask

ask the question bro, i will be ready to assist.

maths/ch3m/physics/bio

Heating a solution containing an enzyme usually decreases the enzyme's activity. The reason for this might be: heating the solution will denature the enzyme. The correct option is D.

This may be due to the fact that: heating increases the enzyme's temperature, which may have a variety of effects on the reaction. Enzyme reactions are catalyzed by proteins, which are sensitive to temperature changes. Temperature can cause the enzyme to denature, which causes a structural change in the protein, resulting in a loss of function.

The enzyme's substrate ability to bind will decline as the temperature rises. As a result, raising the temperature of the reaction will reduce the amount of available free energy due to the increased entropy of the reaction. The elevated temperature may also raise the activation energy of the catalyzed reaction.

Enzyme activity is influenced by the temperature and pH of the environment in which they are located. It is important to keep the enzymes at the appropriate temperature and pH level to avoid denaturation and maintain enzyme activity. Enzyme function can be adversely affected by environmental factors such as temperature, pH, and salt concentration.

To know more about enzymes refer here:

https://brainly.com/question/13050632#

#SPJ11

Complete Question:

It is usually the case that heating a solution containing an enzyme markedly decreases the enzyme's activity. What might be the reason for this?

a. The ability of a substrate to bind to its enzyme will decrease as temperature increases.

b. Increasing the temperature of a reaction will decrease the available free energy due to the increased entropy of the reaction.

c. The elevated temperature will increase the activation energy of the catalyzed reaction.

d. Heating the solution will denature the enzyme.

The following are the true characteristics of phytochemicals:

a. substances in plants

d. substances that may possess health-protective effects.

What are Phytochemicals?

Phytochemicals are naturally occurring chemicals found in plant-based foods, such as fruits, vegetables, whole grains, and nuts, that are responsible for their color, taste, and aroma. They are not essential nutrients, but they may help protect against diseases such as cancer, heart disease, and stroke. They are also known as phytonutrients or plant nutrients.

A and D are the correct choices, and they are true characteristics of phytochemicals. B and C are not true about phytochemicals. Hence, option A and option D are the right answer.

Learn more about phytochemicals on:

https://brainly.com/question/30435175

#SPJ11