The process described involves the production of acrylic acid (AA) through the oxidation of propylene. The main reaction produces AA along with water as a by-product, while there are two side reactions that result in the formation of acetic acid (ACA), carbon dioxide (CO2), and additional water. The process includes several steps such as the addition of oxygen to a recycle stream, heating and compressing the mixed stream, the reaction in a jacketed reactor, cooling and separation of the gaseous mixture, purification of acrylic acid through distillation and extraction, and separation of acetic acid and solvent through another distillation process.
The process flow diagram (PFD) for the described production of acrylic acid can be represented as follows:
The PFD shows the various steps involved in the production of acrylic acid, including the addition of oxygen to the recycle stream, preheating and compression of the mixed stream, the reaction in a jacketed reactor, cooling and separation in a condenser and flash column, purification through distillation in DC1, extraction of water in the liquid-liquid extractor (LLE), and further separation of acetic acid and solvent in DC2.
This process aims to produce acrylic acid with high purity while minimizing the presence of by-products such as acetic acid and water. It utilizes various separation techniques, such as distillation and extraction, to achieve the desired purity of acrylic acid. The recycling of oxygen and the use of a solvent in the LLE column contribute to the efficiency and sustainability of the process.
To know more about acrylic acid (AA) click here:
https://brainly.com/question/6272459
#SPJ11
In some reactions, the product can become a quencher of the reaction itself. For the following mechanism, devise the rate law for the formation of the product P given that the mechanism is dominated by the quenching of the intermediate A* by the product P. (1) A + ARA* + A (1') A+ A* > A+A Kb (2) A* P (3) A* + PA+P
The rate law for the formation of product P in this mechanism, dominated by the quenching of intermediate A* by product P, is rate = k[A][P]².
In the given mechanism, the intermediate A* reacts with reactant A to form the product P. However, in step (3), the intermediate A* can also react with product P to regenerate reactant A and form another intermediate PA+. The formation of PA+ competes with the formation of product P. As stated, the mechanism is dominated by the quenching of A* by P, indicating that the reaction between A* and P is faster than the reaction between A* and A.
Considering this dominance, the rate-determining step is step (2) where A* is consumed to form product P. The rate law for this step is rate = k[A*][P]. Since the concentration of A* is directly proportional to the concentration of A, we can substitute [A*] with [A] in the rate law. However, since the intermediate A* is in equilibrium with A, we can express [A] in terms of [A*] using the equilibrium constant Kb: [A] = Kb[A*]. Substituting this back into the rate law, we get rate = k[A][P]², which represents the rate law for the formation of product P in this mechanism.
Learn more about equilibrium : brainly.com/question/30694482
#SPJ11
filled the table and answer the following question skip the
graph question and answer questions 5,6,7,8
you need to calculate the concentration of HCI Ignore the number
because they are useless
this f
Observations: Table 2. Concentration of HCI and reaction time Trial [HCI] (mol/L) Rate (mol/Ls) Time (seconds) 1/[H] 1 0.5 339.88 2 1.0 76.33 3 1.5 27.85 2.0 5 2.5 11.05 6 3.0 Analysis 1. Perform In[H
Answer : The concentrations of HCl in the remaining trials are:
3rd trial: 0.875 mol/L
4th trial: 0.625 mol/L
5th trial: 1.09 mol/L
6th trial: 1.25 mol/L
From Table 2, we can see that the values of the rate of reaction are given in terms of mol/Ls and the concentrations are given in terms of mol/L, and we need to calculate the concentration of HCl. So, we can use the rate equation:
rate = k[HCl]^n and find the value of k.
Then, we can use the value of k to find the concentration of HCl in the remaining trials, which do not have a concentration value given.
The first trial already has the concentration of HCl given, so we can use that to find the value of k as follows:
Given, [HCl] = 0.5 mol/L,
rate = 1/[339.88 s] = 0.002941 mol/Ls
rate = k[HCl]^n0.002941 = k(0.5)^n
For the second trial, we have:
[HCl] = 1.0 mol/L,
rate = 1/[76.33 s] = 0.0131 mol/Ls
0.0131 = k(1.0)^n
Using the values of rate and concentration from any one trial, we can find the value of k and then use it to calculate the concentration in the other trials.
So, we can take the first trial as the reference and find the value of k:
0.002941 = k(0.5)^n
k = 0.002941/(0.5)^n
For the third trial, we have:
rate = 1/[27.85 s] = 0.0358 mol/Ls
0.0358 = k(1.5)^n
[HCl] = rate/k(1.5)^n
[HCl] = 0.0358/(0.002941/(0.5)^n)(1.5)^n[HCl] = 0.875 mol/L
For the fourth trial, we have: rate = 2.0 mol/Ls
2.0 = k(2.0)^n
[HCl] = 2.0/k(2.0)^n
[HCl] = 2.0/(0.002941/(0.5)^n)(2.0)^n
[HCl] = 0.625 mol/L
For the fifth trial, we have:
rate = 2.5 mol/Ls
2.5 = k(2.5)^n
[HCl] = 2.5/k(2.5)^n
[HCl] = 2.5/(0.002941/(0.5)^n)(2.5)^n
[HCl] = 1.09 mol/L
For the sixth trial, we have:
rate = 3.0 mol/Ls
3.0 = k(3.0)^n
[HCl] = 3.0/k(3.0)^n
[HCl] = 3.0/(0.002941/(0.5)^n)(3.0)^n
[HCl] = 1.25 mol/L
Know more about concentrations here:
https://brainly.com/question/30575626
#SPJ11
11. Shyam helps his mother with the household chores. While helping his mother in the kitchen, Rohan notices that yellow flame is coming out of the gas stove. He immediately asked his mother to clean the gas stove after cooking is done. Why did he ask his mother to clean the gas stove?
Regular maintenance and cleaning of gas stoves are important to ensure safe and efficient operation, prevent potential hazards, and maintain the performance of the appliance.
Rohan asked his mother to clean the gas stove because he noticed a yellow flame coming out of it. A yellow flame in a gas stove indicates incomplete combustion, which can be a sign of a problem with the burner or the supply of gas. It is important to address this issue and clean the gas stove to ensure proper combustion and safety.
A yellow flame typically indicates the presence of impurities or contaminants in the gas supply, such as dust, dirt, or grease. These impurities can interfere with the proper mixing of gas and air, resulting in incomplete combustion. Incomplete combustion produces a yellow flame instead of a clean, blue flame.
Cleaning the gas stove involves removing any accumulated dirt, grease, or debris from the burner and ensuring proper airflow for efficient combustion.
Learn more about potential here
https://brainly.com/question/28300184
#SPJ11
An organic liquid is to be vaporised inside the tubes of a vertical thermosyphon reboiler. The reboiler has 170 tubes of internal diameter 22 mm, and the total hydrocarbon flow at inlet is 58 000 kg h-¹. Using the data given below, calculate the convective boiling heat transfer coefficient at the point where 30% of the liquid has been vaporised. DATA Nucleate boiling film heat transfer coefficient Inverse Lockhart-Martinelli parameter 1 X₂ Liquid thermal conductivity Liquid specific heat capacity Liquid viscosity 3400 W m-²K-¹ 2.3 0.152 W m-¹K-¹1 2840 J kg-¹K-¹ 4.05 x 10-4 N s m-²
The calculation of the convective boiling heat transfer coefficient at the point where 30% of the liquid has been vaporized requires specific equations or correlations that are not provided.
To calculate the convective boiling heat transfer coefficient, we need to consider the nucleate boiling film heat transfer coefficient and the inverse Lockhart-Martinelli parameter. These two parameters are used to estimate the convective boiling heat transfer coefficient in thermosyphon reboilers.
In the first paragraph, we summarize the given information and problem statement. The problem involves calculating the convective boiling heat transfer coefficient in a vertical thermosyphon reboiler. The reboiler has 170 tubes with an internal diameter of 22 mm, and the total hydrocarbon flow at the inlet is 58,000 kg/h. The relevant data includes the nucleate boiling film heat transfer coefficient, inverse Lockhart-Martinelli parameter, liquid thermal conductivity, liquid specific heat capacity, and liquid viscosity.
In the second paragraph, we explain how to calculate the convective boiling heat transfer coefficient. The convective boiling heat transfer coefficient can be estimated using the nucleate boiling film heat transfer coefficient and the inverse Lockhart-Martinelli parameter. These parameters are used to account for the effects of nucleate boiling and convective boiling in the reboiler. By considering the given data and applying the appropriate equations or correlations, the convective boiling heat transfer coefficient can be calculated. However, since the equation or correlation for calculating the convective boiling heat transfer coefficient is not provided, we are unable to provide a specific numerical answer within the given word limit.
To learn more about convective click here, brainly.com/question/16635311
#SPJ11
Water 2.0 is/was making water safe(r) to drink.
What physical and chemical methods described in the book have been
and are used to sanitize drinking water.
Water 2.0 is/was making water safer to drink. Physical and chemical methods described in the book that have been and are used to sanitize drinking water are ultraviolet light, ozone treatment, chlorine treatment, reverse osmosis, and activated carbon filtration.
The primary aim of Water 2.0 is to improve water treatment technologies by bringing together innovative technologies and financing to overcome aging infrastructure and inadequate funding. The project aims to create smart water systems, monitor water quality, and enable quick and reliable response in the event of any contamination. Physical and chemical methods have been employed to make drinking water safer. The physical methods include methods such as reverse osmosis and activated carbon filtration, which help in the removal of large particles and chemical contaminants.
Reverse osmosis is a physical filtration method used in drinking water treatment processes, which removes contaminants such as dissolved salts, inorganic impurities, and organic matter from water.
Chemical methods include methods such as chlorination, ozone treatment, and ultraviolet light. Chlorination is the most commonly used disinfection method for drinking water, and it's effective in destroying harmful bacteria and viruses that can be found in water. Ozone treatment is another powerful disinfection method that is used to treat drinking water. It's effective in removing pollutants such as bacteria, viruses, and organic matter from water.
Ultraviolet light, which is another disinfection method, is used in drinking water treatment processes to destroy bacteria and viruses. Water treatment is necessary to make water safe for human consumption. The treatment involves physical and chemical methods that help in the removal of contaminants and harmful substances from the water.
To know more about chemical visit:
https://brainly.com/question/29240183
#SPJ11
There is a crystalline powder oxide sample. Above 100 °C, its crystal structure belongs to a perfect cubic system where an atom "B" is exactly sitting at the center of the unit cell. But at room temperature, its structure belongs to a so-called pseudo cubic system, where the atom "B" deviates from the geometric center of the perfect tetragonal system, and then introduce specific physical properties by breaking the symmetry. The deviation is very small, around 0.05-0.01 angstrom. In order to correlate its physical properties to the subtle structure change, we need to identify the exact position of atom "B". There are several different techniques can meet the characterization requirement. Which technique you prefer to use? Please explain why this technique is qualified for this task, and how to locate the exact position of atom "B". 1
X-ray diffraction (XRD) is a suitable technique for identifying the exact position of atom "B" in the crystalline powder oxide sample. XRD can determine the crystal structure and atomic positions by analyzing the diffraction pattern obtained from the sample. This technique enables the precise localization of atom "B" and provides insights into the relationship between its position and the observed physical properties resulting from the structural deviation.
One technique that can be used to identify the exact position of atom "B" in the crystalline powder oxide sample is X-ray diffraction (XRD). XRD is a powerful tool for determining the crystal structure and atomic positions within a material. Here's why XRD is qualified for this task and how it can be used:
1. Qualification: XRD is capable of providing information about the crystal structure and atomic positions in a material. It can accurately determine the unit cell parameters, lattice symmetry, and atomic positions, which makes it suitable for studying the subtle structural changes and locating the position of atom "B" in the pseudo cubic system.
2. Procedure: To locate the exact position of atom "B" using XRD, the following steps can be taken:
a. Preparation: The crystalline powder oxide sample needs to be carefully prepared, ensuring a well-prepared sample with a sufficient quantity of the material.
b. Data Collection: XRD experiments are performed by exposing the sample to X-ray radiation and measuring the resulting diffraction pattern. The diffraction pattern contains peaks that correspond to the crystal lattice and atomic positions.
c. Data Analysis: The obtained diffraction pattern is analyzed using specialized software to determine the lattice parameters and refine the atomic positions. Rietveld refinement or similar techniques can be employed to fit the experimental data with a model and extract the precise position of atom "B" within the crystal structure.
d. Verification: The refined atomic positions can be further verified by comparing them with theoretical calculations and other complementary techniques, if available.
By using XRD, the exact position of atom "B" in the crystal structure can be determined, allowing for a better understanding of the relationship between its position and the observed physical properties resulting from the structural deviation.
Read more on Crystal structure here: https://brainly.com/question/29398453
#SPJ11
What is the Al3+:Ag+concentration ratio in the cell Al(s) | Al3+(aq) || Ag+(aq) | Ag(s) if the measured cell potential is 2. 34 V? Please show work
A) 0. 0094:1
B) 0. 21:1
C) 4. 7:1
D) 110:1
To determine the [tex]Al_3^+:Ag^+[/tex] concentration ratio in the electrochemical cell, the Nernst equation is used. By solving the equation, the ratio is found to be 1/27, which corresponds to option A (0.0094:1).
To determine the [tex]Al_3^+:Ag^+[/tex] concentration ratio in the given electrochemical cell, we need to use the Nernst equation, which relates the cell potential (Ecell) to the concentrations of the species involved. The Nernst equation is given by:
Ecell = E°cell - (RT/nF) * ln(Q)
In this case, the balanced redox equation is:
[tex]Al(s) + 3Ag+(aq)[/tex] → [tex]Al_3+(aq) + 3Ag(s)[/tex]
The number of electrons transferred (n) is 3.
Since the reaction is at standard conditions (25°C), we can assume that E°cell = 0.59 V (retrieved from standard reduction potentials).
Plugging the values into the Nernst equation:
2.34 V = 0.59 V - (8.314 J/(mol·K) * (298 K) / (3 * 96485 C/mol) * ln(Q)
Simplifying the equation:
1.75 V = ln(Q)
Taking the exponential of both sides:
[tex]Q = e^{(1.75)}[/tex]
Now, Q represents the concentration ratio of products to reactants. The ratio of [tex]Al_3^+[/tex] to [tex]Ag^+[/tex] is 1:3, based on the balanced equation. Therefore:
[tex]Q = [Al_3^+]/[Ag^+]^3 = 1/3^3 = 1/27[/tex]
Comparing this to the options given, the closest ratio is 0.0094:1 (option A).
Therefore, the correct answer is A) 0.0094:1.
For more questions on the Nernst equation, click on:
https://brainly.com/question/15237843
#SPJ8
A mixture of 1-butanol (1) + water (2) forms an azeotrope where x," - 0.807 und T - 335.15 K. Assuming the following relations apply for the activity coefficients: In y - 1) In yn - A) Given: Prat = 8.703 kPa and Prat = 21.783 kPa (a) Derive an expression for G/RT as a function of A and xi (b) Determine the numerical value of the constant (c) Using modified Raoult's law, determine the pressure atx" -0.807 and T-335.15 K.
To derive an expression for G/RT as a function of A and xi, we start with the Gibbs-Duhem equation: Σxi d(ln γi) = 0.
Integrating this equation gives: ∫d(ln γi) = 0. Integrating again and using the relation ln γi = ln yi - ln xi, we have: ln yi - ln xi = A ln xi + B. Rearranging the equation, we get: ln yi = (A + 1) ln xi + B. Taking the exponential of both sides, we obtain: yi = Kxi^(A+1), where K = e^B. (b) To determine the numerical value of the constant K, we can use the given data. At x" = 0.807, the mole fraction of the more volatile component (water) is yn = 0.807. Substituting these values into the equation above, we have: 0.807 = K(0.807)^(A+1).
Simplifying, we get: K = 0.807^(1-A). (c) Using the modified Raoult's law, the pressure at x" = 0.807 and T = 335.15 K can be determined. The modified Raoult's law equation is: P = Σxi γi P^sat, where P^sat,i is the vapor pressure of component i. Assuming an ideal gas mixture, we can use the Antoine equation to estimate the vapor pressures. Solving the equation above for P and substituting the given mole fraction and activity coefficient (A = -0.807), we can calculate the pressure at x" = 0.807 and T = 335.15 K.
To learn more about Gibbs click here: brainly.com/question/13795204
#SPJ11
There are NMR, IR and UV spectrum. The three types of spectrum
are the result of analyzing one molecule. Analyze the spectrum
presented to find a single molecule. The molecular weight is
166.17
1/3 singlet 10 1.00- Transmittance (a.u) doublet & doublet 70 60 50 40 30 20 10- 4000 3500 doublet Solvent peak doublet singlet singlet leileil 3000 2500 2000 Wavenumber (cm³¹) Absorbance 1500 1.0 0
Based on the provided information from the NMR, IR, and UV spectra, it is not possible to determine a single molecule with a molecular weight of 166.17.
To identify a molecule based on the spectra, we typically look for specific peaks, patterns, and characteristic absorption or emission wavelengths. However, the information provided in the question is incomplete and does not include the necessary details or distinctive features required for molecule identification.
The NMR spectrum is mentioned as "1/3 singlet," which is not a common notation. Without additional information about chemical shifts or coupling constants, it is challenging to extract meaningful insights from the NMR spectrum.
The IR spectrum shows a range of wavenumbers and absorbances but lacks specific peaks or characteristic absorption bands. The solvent peak is mentioned, but it does not provide information about the molecule itself.
The UV spectrum is not provided, and the information given after the IR spectrum is unclear and does not relate to the UV spectrum.
Without a more detailed description of the peaks, patterns, or characteristic features in the NMR, IR, and UV spectra, it is not possible to identify a single molecule with a molecular weight of 166.17. Additional information and a more comprehensive analysis would be necessary to determine the specific molecule based on these spectra.
To know more about molecular weight, visit
https://brainly.com/question/24191825
#SPJ11
Functional Group (General Formula) Alkanes Alkenes Alkynes Major Bonds (in Summary list) Corresponding IR Unique Frequency 4000-1300 cm-¹ Characteristics (strong, broad, weak etc.) Names of molecules
Alkanes, with C-C single bonds, have no strong or unique infrared (IR) absorption. Alkenes, with C-C double bonds, exhibit a strong absorption around 1640-1680 cm⁻¹, while alkynes, with C-C triple bonds, show a strong absorption around 2100-2260 cm⁻¹ in the IR region.
Functional Group (General Formula): Alkanes
Major Bonds: C-C single bonds
Corresponding IR Unique Frequency: No unique frequency in the given range (4000-1300 cm⁻¹)
Characteristics: Alkanes exhibit a relatively weak or absent absorption in the infrared (IR) region, particularly in the range of 4000-1300 cm⁻¹. They generally show a flat and featureless IR spectrum in this region.
Names of molecules: Methane (CH₄), Ethane (C₂H₆), Propane (C₃H₈), Butane (C₄H₁₀), Pentane (C₅H₁₂), and so on.
Functional Group (General Formula): Alkenes
Major Bonds: C-C double bonds
Corresponding IR Unique Frequency: Around 1640-1680 cm⁻¹
Characteristics: Alkenes exhibit relatively strong and sharp absorption in the infrared (IR) region around 1640-1680 cm⁻¹ due to the stretching vibrations of the C=C double bond. This absorption appears as a strong, sharp peak in the IR spectrum.
Names of molecules: Ethene (C₂H₄), Propene (C₃H₆), Butene (C₄H₈), Pentene (C₅H₁₀), and so on.
Functional Group (General Formula): Alkynes
Major Bonds: C-C triple bonds
Corresponding IR Unique Frequency: Around 2100-2260 cm⁻¹
Characteristics: Alkynes exhibit relatively strong and sharp absorption in the infrared (IR) region around 2100-2260 cm⁻¹ due to the stretching vibrations of the C≡C triple bond. This absorption appears as a strong, sharp peak in the IR spectrum.
Names of molecules: Ethyne (Acetylene, C₂H₂), Propyne (C₃H₄), Butyne (C₄H₆), Pentyne (C₅H₈), and so on.
Learn more about Functional Group at https://brainly.com/question/10058230
#SPJ11
The l-propanol(1)/water(2) system is found in VLE at 101.33 kPa when x1 = 0.65. The vapor phase may be assumed ideal, and the liquid phase is ruled by the Wilson equation. Find the mole fraction of water in the vapor phase and the equilibrium temperature of the system.
The Wilson equation is given by ln(γ1/γ2) = -ln(φ1/φ2) = A12(1 - T/Tr) .The mole fraction of water in the vapor phase and the equilibrium temperature of the system, can be found using Wilson equation .
The Wilson equation is given by ln(γ1/γ2) = -ln(φ1/φ2) = A12(1 - T/Tr) where γ is the activity coefficient and φ is the fugacity coefficient. Given that the system is at vapor-liquid equilibrium (VLE) at 101.33 kPa and x1 = 0.65, we can use the Wilson equation to find the equilibrium temperature and the mole fraction of water in the vapor phase. First, we assume the vapor phase is ideal, so the activity coefficient of water (γ2) in the vapor phase is equal to 1. Next, we rearrange the Wilson equation to solve for the equilibrium temperature (T): ln(γ1/γ2) = -ln(φ1/φ2) = A12(1 - T/Tr). Since γ2 = 1, we have: ln(γ1) = -ln(φ1/φ2) = A12(1 - T/Tr). Now, we substitute the given value of x1 = 0.65 and rearrange the equation: ln(γ1) = -ln(φ1/1) = A12(1 - T/Tr); ln(γ1) = A12(1 - T/Tr); ln(γ1) = A12 - A12(T/Tr). Given that the system is at VLE, we can assume that the fugacity coefficient of water in the liquid phase (φ1) is equal to the vapor pressure of pure water at the given temperature (101.33 kPa). Let's denote this as P1.
Now, we have: ln(γ1) = A12 - A12(T/Tr) = ln(P1/1). From the Wilson equation, we can determine the values of A12 and Tr based on the system's properties. Finally, we solve for T, the equilibrium temperature, by rearranging the equation and calculating its value. Once we have T, we can calculate the mole fraction of water in the vapor phase (y2) using the equation: y2 = γ2 * x2 = 1 * (1 - x1). By applying these calculations, we can find the mole fraction of water in the vapor phase and the equilibrium temperature of the system.
To learn more about mole fraction click here: brainly.com/question/30724931
#SPJ11
Air (70% relative humidity) is saturated with n-hexane vapor. The gaseous mixture (22°C and 1 atm) is sparked and burned. Assuming the limiting reactant is used to completion, determine the conversion of n-hexane in the combustion reaction.
The conversion of n-hexane in the combustion reaction, assuming the limiting reactant is used to completion, can be determined based on the reactant stoichiometry and the conditions of the gaseous mixture (70% relative humidity, 22°C, and 1 atm).
To determine the conversion of n-hexane, we need the balanced equation for the combustion reaction and the molar ratios of reactants and products. Since the limiting reactant is used to completion, it will be completely consumed in the reaction.
1. Write the balanced equation: The balanced equation for the combustion of n-hexane is typically C6H14 + (19/2)O2 -> 6CO2 + 7H2O.
2. Determine the limiting reactant: Compare the molar ratio of n-hexane to oxygen (O2) in the balanced equation. If the amount of O2 is insufficient, n-hexane is the limiting reactant. If the amount of O2 is excess, O2 is the limiting reactant.
3. Calculate the conversion of n-hexane: Once the limiting reactant is identified, the conversion of n-hexane can be determined by calculating the moles of n-hexane consumed relative to the initial moles of n-hexane present.
The given information about the gaseous mixture being saturated with n-hexane vapor, along with the conditions of temperature and pressure, does not provide sufficient data to directly calculate the conversion of n-hexane. Additional information, such as the initial amounts or concentrations of reactants, is necessary to perform the calculation accurately.
Learn more about reaction : brainly.com/question/16737295
#SPJ11
Consider ten (10) ethylene molecules undergoes
polymerization to form the
polythene. What is the molecular mass of the resultant polymer
Here, each ethylene molecule consists of two carbon atoms and four hydrogen atoms, giving a total molecular mass of 28 atomic mass units. So,, the olecular mass of the resultant polythene polymer would be 280 amu.
Ethylene, also known as ethene, has the chemical formula C2H4. Each ethylene molecule is composed of two carbon atoms, each with a molecular mass of approximately 12 amu, and four hydrogen atoms, each with a molecular mass of approximately 1 amu. By summing the individual atomic masses, the molecular mass of one ethylene molecule is calculated as:
(2 carbon atoms × 12 amu) + (4 hydrogen atoms × 1 amu) = 24 amu + 4 amu = 28 amu.
Since ten ethylene molecules are undergoing polymerization to form polythene, the molecular mass of the resultant polymer can be obtained by multiplying the molecular mass of one ethylene molecule by 10:
28 amu × 10 = 280 amu.
Therefore, the molecular mass of the resultant polythene polymer is 280 amu. It is important to note that this calculation assumes a simple polymerization process without considering any branching or cross-linking, which can affect the molecular structure and, consequently, the molecular mass of the polymer.
To learn more about ethylene click here, brainly.com/question/14797464
#SPJ11
a)whats the differences between LL extraction and distillation
prcesses ?
b)whats distillate , extract and carrier ?
a) LL extraction separates components based on solubility in immiscible liquids, while distillation separates components based on boiling points.
b) Distillate is the condensed vapor from distillation, extract is the concentrated solution obtained through extraction, and carrier is the solvent used for extraction.
a) The main differences between LL extraction and distillation processes are as follows:
Principle:LL (Liquid-Liquid) Extraction is a separation technique based on the differential solubility of components in two immiscible liquids, while
Distillation is a separation technique based on the differences in boiling points of components in a liquid mixture.
Operating Principle:LL Extraction involves the transfer of solute(s) from one liquid phase (extract phase) to another liquid phase (raffinate phase) through contact and mixing, whereas
Distillation involves the vaporization of a liquid mixture followed by condensation to separate the components based on their boiling points.
Applicability:LL Extraction is particularly useful for separating components that have different solubilities in two immiscible solvents, while Distillation is suitable for separating components with different boiling points.
Equipment:LL Extraction typically requires an extraction vessel or column, where the two immiscible liquids are mixed and allowed to separate, while
Distillation requires a distillation apparatus such as a distillation column, where the liquid mixture is heated and the vapors are condensed.
b) In the context of extraction and distillation, the terms "distillate," "extract," and "carrier" are defined as follows:
Distillate:Distillate refers to the condensed vapor obtained during the distillation process.
When a liquid mixture is heated and its components vaporize at different temperatures, the vapors are condensed, resulting in the separation of the components.
The condensed liquid, which contains the more volatile components, is known as the distillate.
Extract:An extract is a concentrated solution or mixture obtained by extracting a desired component or components from a solid or liquid matrix using a solvent or extraction medium.
In the extraction process, the extract is the resulting solution or mixture that contains the desired components extracted from the original material.
Carrier:In the context of extraction, a carrier refers to a solvent or liquid medium used to dissolve or suspend the desired components during the extraction process.
The carrier helps in transferring the desired components from the original material into the extract. It may act as a diluent or aid in solubilizing the components of interest.
The choice of carrier depends on the nature of the components being extracted and the desired separation process.
Learn more about distillation here:
https://brainly.com/question/24553469
#SPJ11
3. Al is placed in a solution of FeSO4(aq).
(a) Will a reaction occur?
(b) If so, what is oxidized and what is reduced? If not, how could you force a reaction to occur?
(a) Yes, a reaction will occur between aluminum (Al) and iron(II) sulfate (FeSO4) in aqueous solution.
(b) In this reaction, aluminum (Al) will be oxidized, and iron(II) sulfate (FeSO4) will be reduced. The balanced chemical equation for the reaction is:
2Al + 3FeSO4 → Al2(SO4)3 + 3Fe
In this equation, aluminum (Al) is oxidized from its elemental form (Al) to aluminum sulfate (Al2(SO4)3) by losing three electrons:
2Al → Al3+ + 3e-
Iron(II) sulfate (FeSO4) is reduced from iron(II) ions (Fe2+) to elemental iron (Fe) by gaining three electrons:
3Fe2+ + 3e- → 3Fe
To force a reaction to occur, one could increase the temperature or concentration of the reactants. Increasing the temperature provides more energy for the reactant particles, increasing the likelihood of successful collisions.
Higher concentration increases the chances of reactant particles coming into contact with each other, also promoting reaction rates. Additionally, a catalyst could be used to lower the activation energy barrier and facilitate the reaction.
For more questions on reactant, click on:
https://brainly.com/question/6421464
#SPJ8
An ideal gas of N diatomic molecules is at absolute temperature T. If the number of molecules is doubled without changing the temperature, the internal energy increases by what multiple of NkT? BTW, what is this k?
When the number of molecules in an ideal gas is doubled without changing the temperature, the internal energy of the gas increases by a factor of 2NkT. The constant "k" represents the Boltzmann constant.
The internal energy of an ideal gas is directly proportional to the number of molecules, temperature, and a constant factor, which is the Boltzmann constant (k). When the number of molecules is doubled without changing the temperature, the new internal energy can be calculated.
Let's consider the initial internal energy of the gas as U. Since U is directly proportional to the number of molecules (N), we can write U = NkT.
When the number of molecules is doubled, the new number of molecules becomes 2N. However, the temperature remains the same. Therefore, the new internal energy, U', can be calculated as U' = (2N)kT.
To determine the increase in internal energy, we can compare U' to U. Taking the ratio U' / U, we get:
(U' / U) = [(2N)kT] / (NkT)
= 2
Therefore, the internal energy increases by a factor of 2NkT when the number of molecules is doubled without changing the temperature.
The constant "k" in this context represents the Boltzmann constant, denoted by k. It is a fundamental physical constant that relates the average kinetic energy of particles in a gas to the temperature of the gas. The Boltzmann constant has a value of approximately 1.38 x 10^-23 J/K and is used in various equations and formulas in statistical mechanics and thermodynamics. It provides a link between macroscopic properties, such as temperature, and microscopic behavior at the molecular level.
Learn more about Boltzmann constant : brainly.com/question/30639301
#SPJ11
spectroscopy?
would appreciate if you answered all.
CUA (OX) + eCUA (red) Only the oxidised form of this site gives rise to an EPR active signal as well as the optical band observed at 830 nm. The intensity of these signals varies as a function of elec
Spectroscopy is a technique used to study the interaction of electromagnetic radiation with matter. It provides valuable information about the structure, composition, and properties of materials.
By analyzing the absorption, emission, or scattering of light at different wavelengths, spectroscopy allows us to understand the energy levels and transitions of molecules and atoms. Spectroscopy involves the measurement and analysis of the interaction between electromagnetic radiation and matter. It encompasses various techniques such as UV-visible spectroscopy, infrared spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and electron paramagnetic resonance (EPR) spectroscopy, among others.
In the given context, the focus is on CUA (OX) and CUA (red), which represent different oxidation states of a copper-containing site. Only the oxidized form (CUA (OX)) gives rise to an EPR active signal and an optical band observed at 830 nm. This suggests that the electronic structure and properties of the copper site change depending on its oxidation state.EPR spectroscopy, also known as electron spin resonance spectroscopy, is a technique used to study paramagnetic species and their electron spin states. It detects and measures the absorption of microwave radiation by these species, providing insights into their electronic and magnetic properties.
The intensity of the EPR and optical signals observed at 830 nm varies as a function of electron transfer between the oxidized and reduced forms of the copper site. This variation in intensity reflects the changes in the population of electrons in different energy states and can be used to study the redox properties and electron transfer kinetics of the system.
spectroscopy is a powerful tool for investigating the interaction of electromagnetic radiation with matter. In the case of CUA (OX) and CUA (red), EPR spectroscopy allows the detection of the oxidized form and provides valuable information about its electronic structure and properties. The intensity of the EPR and optical signals can be used to understand the electron transfer processes involved and study the redox behavior of the copper-containing site.
Learn more about electromagnetic radiation here:- brainly.com/question/29646884
#SPJ11
Which statement best describes how electrons fill orbitals in the periodic table?
O Electrons fill orbitals in order of their increasing energy from left to right.
O Electrons fill orbitals in order of their increasing energy from right to left.
O Elements fill orbitals in order of increasing energy from top to bottom in each group.
O Elements fill orbitals in order of increasing energy from bottom to top in each group.
The statement that best describes how electrons fill orbitals in the periodic table is: "Electrons fill orbitals in order of increasing energy from bottom to top in each group option(D)". This principle is known as the Aufbau principle.
The periodic table is organized based on the electron configuration of atoms. Each atom has a specific number of electrons, and these electrons occupy different energy levels and orbitals within those levels. The Aufbau principle states that electrons fill the orbitals in order of increasing energy.
Within each group (vertical column) of the periodic table, elements have the same outermost electron configuration, which determines their chemical properties. As you move down a group, the principal energy level increases, resulting in higher energy orbitals being filled.
When moving across a period (horizontal row), the orbitals being filled have the same principal energy level, but the effective nuclear charge increases. This results in an increase in the electron's energy as you move from left to right across the periodic table.
In summary, electrons fill orbitals in order of increasing energy from bottom to top in each group, and from left to right across periods in the periodic table.
For more questions on Aufbau principle, click on:
https://brainly.com/question/29607625
#SPJ8
Please read the problem carefully and write the solution
step-by-step. Thank you.
Here is the required information:
What method did you use to evaluate the drying time needed for the nonporous filter cake during falling rate period as requested in Homework Chapter 24? Evaluate the needed drying time during falling
In order to evaluate the drying time needed for the nonporous filter cake during the falling rate period, the method used is typically based on the diffusion of moisture within the solid. By considering the average diffusion coefficient of moisture and the desired final moisture content, the drying time can be determined. An alternative method for evaluating the drying time during the falling rate period can be the use of mathematical models, such as the Page model or the drying rate curve analysis, which take into account various factors including the properties of the material, drying conditions, and moisture diffusion characteristics.
To evaluate the drying time during the falling rate period, the diffusion-based method can be used. This involves considering the average diffusion coefficient of moisture in the nonporous filter cake, which is provided as D = 3×106 m²/h. The desired final average moisture content is given as 2%.
Using the diffusion equation and appropriate boundary conditions, the drying time can be calculated. The specific steps and calculations involved in this method would depend on the specific diffusion model or approach chosen.
As for the alternative method, one possibility is the use of mathematical models like the Page model or the drying rate curve analysis. These models involve fitting experimental drying data to equations that describe the drying behavior. The models consider parameters such as drying rate, moisture content, and time to estimate the drying time for the desired moisture content.
By comparing the results obtained from the diffusion-based method and the alternative method, one can assess the accuracy and reliability of each approach in estimating the drying time for the nonporous filter cake during the falling rate period.
To know more about drying time click here:
https://brainly.com/question/15175992
#SPJ11
The complete question is:
What method did you use to evaluate the drying time needed for the nonporous filter cake during the falling rate period as requested in Homework Chapter 24? Evaluate the needed drying time during the falling rate period by another method you know and compare the results with each other. Chapter 24 Homework Assume that the filter cake in Example 24.1 is a nonporous solid with an average diffusion coefficient of moisture D,= 3×106 m²/h (3.2x10-5 ft²/h). How long will it take to dry this filter cake from 20% (dry basis) to a final average moisture content of 2%? EXAMPLE 24.1. A filter cake 24 in. (610 mm) square and 2 in. (51 mm) thick, supported on a screen, is dried from both sides with air at a wet-bulb temperature of 80°F (26.7°C) and a dry-bulb temperature of 160°F (71.1°C). The air flows parallel with the faces of the cake at a velocity of 8 ft/s (2.44 m/s). The dry density of the cake is 120 lb/ft³ (1,922 kg/m³). The equilibrium moisture content is negligible. Under the conditions of drying the critical moisture is 9 percent, dry basis. (a) What is the drying rate during the constant-rate period? (b) How long would it take to dry this material from an initial moisture content of 20 percent (dry basis) to a final moisture content of 10 per-cent? Equivalent diameter D is equal to 6 in. (153 mm). Assume that heat transfer by radiation or by conduction is negligible.
4. Two first order systems are connected in non- interacting way, the overall transfer function is O (i) Product of individual transfer functions O (ii) Sum of individual transfer functions O (iii) di
The overall transfer function of two first-order systems connected in a non-interacting way is the product of individual transfer functions. v
When two first-order systems are connected in a non-interacting way, their overall transfer function can be determined by multiplying the individual transfer functions.
A transfer function represents the relationship between the input and output of a system in the frequency domain. It describes how the system responds to different input frequencies. In the case of first-order systems, the transfer function has the form:
H(s) = K / (τs + 1)
where H(s) is the transfer function, K is the system gain, τ is the time constant, and s is the complex frequency variable.
When two first-order systems are connected in a non-interacting way, their transfer functions can be represented as H₁(s) and H₂(s). The overall transfer function, H(s), is obtained by multiplying the individual transfer functions:
H(s) = H₁(s) * H₂(s)
This multiplication represents the cascading or series connection of the two systems, where the output of one system becomes the input to the next system.
When two first-order systems are connected in a non-interacting way, the overall transfer function is the product of the individual transfer functions. This represents the cascading or series connection of the two systems. It is important to note that this result holds when the systems are non-interacting, meaning that the output of one system does not affect the behavior of the other system.
To know more about first order , visit;
https://brainly.com/question/14704886
#SPJ11
4. Two first order systems are connected in non- interacting way, the overall transfer function is O (i) Product of individual transfer functions O (ii) Sum of individual transfer functions O (iii) difference betweeen the transfer functions (iv) None of these
Consider the catalytic cracking reaction of propane, C3H8: C3H8(g) = C₂H4(g) + CH4 (g) C3H8(g) C₂H4 (8) CHA(g) DATA: 9R 5R 4R Standard-state constant-pressure heat capacity (approximately constant at all T, P), Co Standard-state Gibbs free energy of formation at 298.15 K, A, G -24 kJ/mol 68 kJ/mol -50 kJ/mol -105 kJ/mol 53 kJ/mol -75 kJ/mol Standard-state enthalpy of formation at 298.15 K, A, H (a) We perform this reaction in an isothermal and isobaric reactor, initially loaded with pure C3H8 and maintained at 1 bar. Express the equilibrium conversion of C3H8, Xeq, as a function of the equilibrium constant, K, only. State all assumptions you need. (Note: The equilibrium conversion is the amount of C3H8 that has reacted when the reaction reaches equilibrium, divided by the initial amount of C3H8 loaded.) (b) For the reactor in Part (a), determine the equilibrium conversion of C3 Hg at 700 K. (c) Calculate the heat per mole of input C3H8 required to keep the reactor in Part (a) at constant temperature throughout the reaction (i.e., from the initial state of pure C3H8 at 700 K to the equilibrium state at 700 K). (d) If we instead perform this reaction in an isothermal and isochoric reactor of volume 1 m³, initially loaded with 10 moles of pure C3H8 at 700 K, calculate the equilibrium conversion and the equilibrium pressure.
(a) Equilibrium conversion as a function of the equilibrium constant, K:
Xeq = Kp / (Kp + P₀)
(b) Equilibrium conversion at 700 K:
Xeq = 1.06%
(c) Heat per mole of input C3H8 required to keep the reactor at constant temperature:
Q = 17.7 kJ/mol
(d) Equilibrium conversion and equilibrium pressure in an isothermal and isochoric reactor:
Equilibrium conversion: Xeq = 0.59%
Equilibrium pressure: 0.476 bar
(a) Equilibrium conversion as a function of the equilibrium constant, K:
Xeq = Kp / (Kp + P₀)
Kp = X^2 / (1 - X)
P₀ = 1 bar
Substituting the values:
Xeq = (X^2 / (1 - X)) / ((X^2 / (1 - X)) + 1)
Simplifying the equation:
Xeq = X^2 / (X^2 + 1 - X)
(b) Equilibrium conversion at 700 K:
Kp = 0.0053^2 / 1
Substituting the value:
Xeq = (0.0053^2 / (0.0053^2 + 1 - 0.0053)) * 100
Calculating the result:
Xeq = 1.06%
(c) Heat per mole of input C₃H₈ required to keep the reactor at constant temperature:
ΔH = 167 kJ/mol
Moles of C₃H₈ consumed = 0.106 mol
Calculating the heat:
Q = ΔH * (moles of C₃H₈ consumed)
Q = 167 kJ/mol * 0.106 mol
Q = 17.7 kJ
(d) Equilibrium conversion and equilibrium pressure in an isothermal and isochoric reactor:
V = 1 m^3
n = 10 mol
T = 700 K
Calculating the initial pressure using the ideal gas law:
P = (n * R * T) / V
P = (10 mol * 8.3145 J/mol K * 700 K) / 1 m^3
P = 58086 Pa = 0.58 bar
Substituting the values into the equation:
Xeq = (0.0053^2 / (0.58)) * 100
Calculating the equilibrium conversion:
Xeq = 0.59%
To determine the equilibrium pressure, we can use the equation:
P = Kp * Xeq / (1 - Xeq)
P = (0.0053^2) / (1 - 0.0059)
P = 0.476 bar
Therefore, the equilibrium conversion of C₃H₈ is 0.59%, and the equilibrium pressure is 0.476 bar.
Learn more about equilibrium constants at https://brainly.com/question/3159758
#SPJ11
Two identical atoms from area C bond together. What type of bond will they most likely form?
Answer:
it is a perfectly covalent bond.
Explanation:
When bond is formed between identical atoms, it is a perfectly covalent bond.
Present three real gas correlations / equations of state and a
short description and discussion of limitations or assumptions for
each correlation (one paragraph only for each correlation).
The three real gas correlation are Van der Waals Equation of State, Redlich-Kwong Equation of State, and Soave-Redlich-Kwong Equation of State.
Van der Waals Equation of State:
The Van der Waals equation of state is an improvement over the ideal gas law by incorporating corrections for intermolecular interactions and finite molecular size. It is given by the equation:
(P + a(n/V)^2)(V - nb) = nRT
The equation assumes that the gas molecules have a finite size and experience attractive forces (represented by the term -an^2/V^2) and that the gas occupies a reduced volume due to the excluded volume of the molecules (represented by the term nb). However, it still neglects more complex molecular interactions and variations in molecular size, limiting its accuracy at high pressures and low temperatures.
Redlich-Kwong Equation of State:
The Redlich-Kwong equation of state is another empirical correlation that considers the effects of molecular size and intermolecular forces on real gases. It is given by the equation:
P = (RT)/(V - b) - (a/√(T)V(V + b))
where P is the pressure, V is the molar volume, n is the number of moles, R is the gas constant, T is the temperature, and a and b are Redlich-Kwong parameters. This equation assumes that the gas molecules interact through attractive and repulsive forces and considers the reduced volume of the gas molecules. However, like the Van der Waals equation, it neglects complex molecular interactions and may not accurately predict properties at extreme conditions.
Soave-Redlich-Kwong Equation of State:
The Soave-Redlich-Kwong equation of state is a modification of the Redlich-Kwong equation that introduces a temperature-dependent parameter to improve its accuracy. It is given by the equation:
P = (RT)/(V - b) - (aα/√(T)V(V + b))
This equation provides a better estimation of properties for a wider range of temperatures and pressures compared to the original Redlich-Kwong equation. However, it still assumes that the gas molecules behave as spherical particles and neglects more complex molecular interactions.
To know more about Real Gas, visit
brainly.com/question/29889106
#SPJ11
Define the conversion of the limiting reactant (A) in a batch reactor. Same in a flow reactor. An elementary reaction A-Product occurs in a batch reactor. Write the kinetic equation (ra) for this reaction.
It refers to the extent of its consumption during the reaction, while in a flow reactor, it is determined by the residence time. The kinetic equation (ra) for the elementary reaction A-Product in a batch reactor is given by ra = k * [A].
In contrast, a flow reactor operates with a continuous flow of reactants and products. As reactants flow through the reactor, they encounter the necessary conditions for the reaction to occur, such as suitable temperature, pressure, and catalysts. The conversion of the limiting reactant A in a flow reactor is determined by the residence time, which is the average time a reactant spends inside the reactor. The longer the residence time, the higher the conversion of reactant A. The flow rate of reactants and the reactor size can also affect the conversion.
The kinetic equation (ra) for the elementary reaction A-Product in a batch reactor can be expressed using the rate law. The rate law describes the relationship between the rate of the reaction and the concentrations of the reactants. For the elementary reaction A-Product, the rate law can be written as:
ra = k * [A]
In this equation, ra represents the rate of the reaction, k is the rate constant that depends on the temperature and the specific reaction, and [A] represents the concentration of reactant A. The rate constant k and the concentration of reactant A determine the rate of the reaction, which can be measured experimentally. This equation shows that the rate of the reaction is directly proportional to the concentration of reactant A.
To learn more about catalysts click here, brainly.com/question/24430084
#SPJ11
40kgs-1 of heptane is to be used to extract sunflower oil from sunflower seeds in a counter-current process which uses a centrifuge to separate extract and raffinate . 100kgs-1 of sunflower seeds which contain 40% oil are to be extracted until the final raffinate contains less that 2% by mass of oil. The ratio of solution to insoluble solids in the raffinate is 1:4 by mass and no insoluble solids are present in the extract. There is sufficient solvent to ensure all the oil is dissolved.
Determine the composition and amount of the final extract and raffinate and the number of stages required
PLEASE NOTE - the answer method MUST be graphical using a triangular diagram to demonstrate composition and generate P to calculate number of stages
The composition of the extract will be 100% oil, while the composition of the raffinate will be approximately 4.88% oil and 95.12% insoluble solids.
Using a graphical method with a triangular phase diagram, we can determine the composition of the final extract and raffinate.
To solve this problem, we will use a graphical method using a ternary phase diagram. The diagram will represent the composition of the mixture at each stage and help determine the number of stages required to achieve the desired composition in the raffinate.
Composition of the Extract:
We start with 100 kg/hr of sunflower seeds containing 40% oil. This means we have 40 kg/hr of oil and 60 kg/hr of insoluble solids. Since no insoluble solids are present in the extract, the entire 40 kg/hr of oil will be dissolved in the heptane. Therefore, the composition of the extract will be 100% oil and 0% insoluble solids.
Composition of the Raffinate:
We need to find the composition of the raffinate after the extraction process. The desired final raffinate composition is less than 2% oil by mass. Let's assume the raffinate composition is x% oil and (100 - x)% insoluble solids. According to the ratio of solution to insoluble solids in the raffinate (1:4), we have (1/5) parts of solution and (4/5) parts of insoluble solids.
To calculate the composition of the raffinate, we set up a mass balance equation based on the oil content:
(40 kg/hr - x kg/hr) / (100 kg/hr + 40 kg/hr) = (1/5)
Solving this equation, we find x = 4.88 kg/hr.
Therefore, the composition of the raffinate is approximately 4.88% oil and 95.12% insoluble solids.
Determining the Number of Stages:
To determine the number of stages required for the extraction process, we can use the triangle diagram. We plot the compositions of the extract and raffinate on the triangular diagram and draw a line connecting them. This line represents the path of the mixture as it moves through each stage.
On the triangular diagram, we locate the composition of the extract (100% oil and 0% insoluble solids) and the composition of the raffinate (4.88% oil and 95.12% insoluble solids).
Next, we draw a tie line from the line connecting the extract and raffinate to the solvent corner of the triangle. This tie line represents the composition of the mixture at each stage.
By counting the number of stages required for the tie line to intersect the line connecting the extract and raffinate, we can determine the number of stages needed. Each intersection represents one stage.
Unfortunately, without a visual representation of the triangular diagram and the positions of the extract and raffinate compositions, I'm unable to provide you with an exact number of stages required.
In conclusion, using a graphical method with a triangular phase diagram, we can determine the composition of the final extract and raffinate.
To know more about Raffinate, visit
brainly.com/question/31045789
#SPJ11
Among U, H, A, and G, which can be directly used to determine whether a system is in equilibrium? Give a brief explanation for your answer.
Among U, H, A, and G, the term which can be directly used to determine whether a system is in equilibrium is G.
G is the Gibbs free energy which helps in determining the stability of a system. A system is said to be at equilibrium when its Gibbs free energy (G) is minimum or when there is no free energy available for doing work.
During the chemical reaction, if the Gibbs free energy is negative, the reaction is spontaneous and if it is positive, the reaction is non-spontaneous.
The Gibbs free energy is directly proportional to the degree of randomness (entropy) and inversely proportional to the degree of order (enthalpy).
For a spontaneous process, the Gibbs free energy (G) of the system must be negative. This means that for a system to be at equilibrium, ΔG = 0.
So, the change in Gibbs free energy (ΔG) can be used to determine the spontaneity of a reaction.
Thus, among U, H, A, and G, the term which can be directly used to determine whether a system is in equilibrium is G.
To learn more about Gibbs free energy :
https://brainly.com/question/9179942
#SPJ11
ou are about to design a facility to produce Compound A, in its particulate form as the product. Your design is to be finished by calculating certain parameters as listed in the following questions. One of the reactants used in producing Compound A, R₁, is purified by melting crystallization from a melt containing 20 wt% R1, and 80 wt% of a solvent. The melt enters at 60 °C and the coolant enters in concurrent flow at 15 °C. The initial conservative design is based on a planar wall crystallized that the two planar walls were separated by 10 cm. It will take about 0.5 hours for the crystal to reach a thickness of 2 cm at the top. If now the process will be achieved in a cylindrical crystalliser, where the tube has an inner diameter of 8 cm. All material properties and thermal transport performance are kept the same. To reach the same thickness of 2 cm at the top of the tube, how long will it take? O 0.45 O 0.40 O 0.63 0.5
It would take approximately 0.5 hours for both the planar wall crystallizer and the cylindrical crystallizer to reach a thickness of 2 cm at the top.
To determine how long it will take to reach a thickness of 2 cm at the top of the cylindrical crystallizer, we can compare the two crystallizer designs and calculate the time based on the differences in geometry.
For the planar wall crystallizer, we know that it takes 0.5 hours for the crystal to reach a thickness of 2 cm at the top when the planar walls are separated by 10 cm.
Now, let's calculate the volume difference between the two designs. The planar wall crystallizer has a rectangular shape, and the cylindrical crystallizer has a cylindrical shape.
For the planar wall crystallizer:
Volume = length × width × height
Volume = 10 cm × width × 2 cm (since the crystal reaches a thickness of 2 cm at the top)
Volume = 20 cm² × width
For the cylindrical crystallizer:
Volume = π × (radius)² × height
Volume = π × (4 cm)² × 2 cm (since the crystal reaches a thickness of 2 cm at the top)
Volume = 32π cm³
Now, we can equate the volumes and solve for the width of the planar wall crystallizer:
20 cm² × width = 32π cm³
Simplifying:
width = (32π cm³) / (20 cm²)
width ≈ 5.09 cm
Now we can calculate the time required for the cylindrical crystallizer using the same equation:
Volume = π × (radius)² × height
2 cm = π × (4 cm)² × height
Simplifying:
height = (2 cm) / (π × (4 cm)²)
height ≈ 0.05 cm
Since the crystal grows at the same rate in both designs, the time required for the cylindrical crystallizer to reach a thickness of 2 cm at the top would be the same as the planar wall crystallizer, which is 0.5 hours.
To know more about Crystallizer, visit
brainly.com/question/30670227
#SPJ11
A feed of 100 mol/min with a mixture of 50 mol% pentane (1), 30 mol% hexane (2) and 20 mol% cyclohexane (3) is fed to a flash drum. The temperature and pressure inside the drum are T = 390K and р = 5
Based on the given information, we can infer that the vapor phase in the flash drum will be rich in pentane, while the liquid phase will contain relatively higher proportions of hexane and cyclohexane.
In a flash drum, a mixture of components with different boiling points is subjected to a lower pressure, causing some of the components to vaporize while others remain in the liquid phase. The vapor and liquid phases achieve an equilibrium state, and the composition of each phase can be determined using the principles of vapor-liquid equilibrium.
Given:
Feed flow rate: 100 mol/min
Mixture composition:
Pentane (1): 50 mol%
Hexane (2): 30 mol%
Cyclohexane (3): 20 mol%
Temperature inside the drum (T): 390 K
Pressure inside the drum (p): 5 bar
To calculate the composition of the vapor and liquid phases in the flash drum, we need to use equilibrium data, such as boiling point data or vapor-liquid equilibrium constants. Without this data, we cannot directly determine the composition of the phases.
However, we can make some general observations:
Pentane has the lowest boiling point among the three components, followed by hexane and then cyclohexane. At the given temperature and pressure, it is likely that pentane will be predominantly in the vapor phase.
Hexane and cyclohexane have higher boiling points and may remain in the liquid phase to a greater extent.
Based on the given information, we can infer that the vapor phase in the flash drum will be rich in pentane, while the liquid phase will contain relatively higher proportions of hexane and cyclohexane. However, without specific equilibrium data, we cannot provide precise calculations or exact composition values for the vapor and liquid phases.
A feed of 100 mol/min with a mixture of 50 mol% pentane (1), 30 mol% hexane (2) and 20 mol% cyclohexane (3) is fed to a flash drum. The temperature and pressure inside the drum are T = 390K and р = 5 bar. The values of the equilibrium constant for the three components are: K1 = 1.685, K2 = 0.742, K3 = 0.532. Find the mole fraction of each component in liquid and vapor phase, and the molar flowrate of vapor and liquid leaving the drum. 35
To know more about vapor phase, visit:
https://brainly.com/question/28303854
#SPJ11
a) Explain why the use of sacrificial anodes of Zinc (Zn) in acidic solution can contribute
hydrogen embrittlement. Set up reaction equations for the cathode and the anode that explain this
the phenomenon
The use of sacrificial anodes of Zinc (Zn) in an acidic solution can contribute to hydrogen embrittlement. In the presence of a zinc anode, the hydrogen ions are reduced to hydrogen gas on the anode surface. These hydrogen gas molecules then diffuse through the metal and interact with the material's microstructure, causing it to become brittle and prone to cracking.
The reaction equation for the cathode would be:
H+ + e- → 1/2 H2
The reaction equation for the anode would be:
Zn → Zn2+ + 2e-
When a zinc anode is used in an acidic solution, it will be oxidized to produce Zn2+ and release electrons. The electrons released from the zinc anode will then be used to reduce hydrogen ions from the acidic solution to hydrogen gas on the anode's surface. The hydrogen gas molecules that are produced then diffuse through the metal and interact with the material's microstructure, causing it to become brittle and prone to cracking. This phenomenon is known as hydrogen embrittlement.
Hydrogen embrittlement can occur in any metal that is exposed to hydrogen gas, and it is a serious problem in many industries. To prevent this, it is important to use materials that are resistant to hydrogen embrittlement or to take steps to minimize the exposure of the metal to hydrogen gas.
Information on anode : https://brainly.com/question/13603874
#SPJ11
Using DWSIM of Aspen plus to draw Process design for producing fuel-based methanol with the capacity of 150,000 tons/year
1) process flow sheet
2) full material balance
3) process description
4) PID for full process
The annual output of fuel-based methanol should be 150,000 tons, and the purity of product is greater than 99 wt%. Production time is 8000 h per year. Composition of fresh feed gas: H2 = 72 mol%, CO = 12 mol%, CO2 = 16 mol%. The temperature and pressure of feed gas are 40 ℃ and 2.5 MPa, respectively.
An isothermal tubular reactor is adopted, and the reaction temperature and pressure are 270 ℃ and 5.0 MPa, respectively. The heat-transfer medium is the high-pressure saturated hot water. The reaction equations are as follows:
1. + 2H2 → H3H
2. 2 + 3H2 → H3H + H2
The CO conversion per pass is 18% for Reaction 1, while the CO2 conversion per pass is 12% for Reaction 2. No side reaction needs to be considered. The distillation unit adopts a single-column process.
The process design for producing 150,000 tons/year of fuel-based methanol using DWSIM of Aspen Plus includes a process flow sheet, full material balance, process description, and a PID for the full process. The design incorporates an isothermal tubular reactor, distillation unit, and specific reaction equations to achieve the desired product purity and annual output.
The process design for producing 150,000 tons/year of fuel-based methanol starts with a feed gas composition of 72 mol% H2, 12 mol% CO, and 16 mol% CO2 at a temperature of 40 ℃ and a pressure of 2.5 MPa. The feed gas undergoes two reactions in an isothermal tubular reactor. Reaction 1 is + 2H2 → H3H with a CO conversion per pass of 18%, while Reaction 2 is 2 + 3H2 → H3H + H2 with a CO2 conversion per pass of 12%. There are no side reactions to consider.
To maintain the desired reaction conditions, a high-pressure saturated hot water medium is used as the heat-transfer medium in the tubular reactor. The reaction temperature is set at 270 ℃, and the reaction pressure is set at 5.0 MPa.
The distillation unit employs a single-column process to separate and purify the methanol product. The aim is to achieve a product purity greater than 99 wt%. The full material balance accounts for all the input streams, reactions, and output streams, ensuring that the annual output of 150,000 tons of methanol is met within the production time of 8000 hours per year.
The process design also includes a process flow sheet, which illustrates the sequence of operations, equipment, and streams involved in the production of fuel-based methanol. Additionally, a PID (Piping and Instrumentation Diagram) is provided, detailing the instrumentation and control systems used in the full process. These design elements collectively enable the production of 150,000 tons/year of fuel-based methanol with the specified purity.
Learn more about methanol : brainly.com/question/3909690
#SPJ11