In the laboratory, a general chemistry student measured the pH of a 0.376 M aqueous solution of nitrous acid to be 1.872. Use the information she obtained to determine the K_a(experiment) for this acid.

To find the conjugate base for HF (hydrofluoric acid), we need to remove a proton (H+) from its chemical formula.

In chemistry, acids are substances that can donate protons (H+) to other substances, while bases are substances that can accept protons. When an acid, such as HF (hydrofluoric acid), dissolves in water, it donates a proton to water, forming hydronium ion (H3O+) as the conjugate acid and a corresponding conjugate base.

The chemical equation for the dissociation of HF in water can be represented as follows:

HF + H2O ⇌ H3O+ + F-

In this equation, HF donates a proton to water, forming hydronium ion (H3O+), which is the conjugate acid. The remaining species, F-, is the conjugate base, as it has accepted the proton from HF.

So, the formula for the conjugate base of HF is F-, which represents the fluoride ion.

To know more about conjugate base,

https://brainly.com/question/30225100

#SPJ11

0.1996 moles of oxygen are formed when 75.0 g of Cu(NO3)2 decomposes according to the given reaction.

The molar mass of Cu(NO3)2 can be calculated as follows:

Cu: 1 x 63.55 g/mol = 63.55 g/mol

N: 2 x 14.01 g/mol = 28.02 g/mol

O: 6 x 16.00 g/mol = 96.00 g/mol

Cu(NO3)2: 63.55 + 28.02 + 96.00 = 187.57 g/mol

To determine the number of moles of Cu(NO3)2 in 75.0 g, we divide the mass by the molar mass:

75.0 g / 187.57 g/mol = 0.3992 mol Cu(NO3)2

From the balanced equation, we see that 2 moles of Cu(NO3)2 produce 1 mole of O2.

So, 0.3992 mol Cu(NO3)2 will produce:

0.3992 mol Cu(NO3)2 x (1 mol O2 / 2 mol Cu(NO3)2) = 0.1996 mol O2

Therefore, 0.1996 moles of oxygen are formed when 75.0 g of Cu(NO3)2 decomposes according to the given reaction.

For more such questions on oxygen

https://brainly.com/question/15457775

#SPJ11

Answer:

First, we need to calculate the molar mass of LiF:

LiF: Li = 6.941 g/mol, F = 18.998 g/mol

1 Li + 1 F = 6.941 g/mol + 18.998 g/mol = 25.939 g/mol

So, 1 mole of LiF weighs 25.939 g.

Now, we can calculate how many moles of LiF are in 30.0 g:

moles = mass ÷ molar mass

moles = 30.0 g ÷ 25.939 g/mol

moles = 1.157 mol

Finally, we can use the formula for molarity to find the volume of the solution:

Molarity = moles ÷ volume (in liters)

We want to solve for volume in milliliters, so we can rearrange the formula:

Volume (in liters) = moles ÷ molarity

Volume (in mL) = (moles ÷ molarity) × 1000

Plugging in the values, we get:

Volume (in mL) = (1.157 mol ÷ 0.650 mol/L) × 1000 = 1778.5 mL

Rounding to three significant figures, the answer is:

The solution contains 1780 mL of 0.650 M LiF.

There is a loss of kinetic energy in the collision, so it is inelastic.


An elastic collision is one in which both momentum and kinetic energy are conserved. In the scenario described, the ball's velocity magnitude is less after bouncing off the wall, which means there is a loss of kinetic energy.

According to Newton's first law, an object in motion will stay in motion unless acted upon by an external force. In this case, the wall provides an external force that changes the ball's velocity. Newton's second law relates force, mass, and acceleration (F = ma), and Newton's third law states that for every action, there is an equal and opposite reaction. In this collision, the wall exerts a force on the ball, and the ball exerts an equal and opposite force on the wall.
To calculate the momentum of an object, you should use the mathematical expression:

momentum = mass x velocity
However, because the kinetic energy is not conserved, this collision is inelastic.

To know more on NEWTON'S  FIRST LAW  refer,

https://brainly.com/question/15280051#

#spj11

The value of ΔG comes out to be -58.8 kJ, and the calculations for the same are shown in the below section.

Net ionic equation for silver bromide can be depicted as follows-

Ag⁺(aq) + Br⁻(aq) ---------> AgBr(s)

Total volume is 50 ml

so, [Ag⁺] = 0.20M * 25.0ml/50.0ml = 0.10 M

likewise, [Br⁻] = 0.20M * 25.0ml/50.0ml = 0.10 M

reaction quotient, Q  = 1/[(Ag⁺)(Br⁻)]

Q = 1/(0.10)²

Q = 100

The reaction is going in forward direction since Q is greater than Ksp, means precipitate would be forming.

so, K = 1/Ksp = 1/(5.0 x 10¹³) = 2.0 x 10¹²

delta G = delta G⁰ + RT lnQ

we know that, delta G⁰ = - RT ln K

So, ΔG = - RT ln K + RT ln Q

ΔG = -RT(ln k - ln Q)

ΔG = - 8.314 * 298 * [(2.0 x 10¹²) - (ln 100)

ΔG = -8.314 * 298 * (28.32 - 4.605)

ΔG = -8.314 * 298 *23.715

ΔG = - 58755.62 J  or -58.8 kJ

Thus, the value of ΔG comes out to be -58.8 kJ.

To learn more about net ionic equation check the link below-

https://brainly.com/question/28193640

#SPJ4

One possible formula for T in terms of t is:

T(t) = 32.5 + 12.5sin(πt/12 - π/2)

where t is the number of hours since midnight.

Here's how this formula works:

Overall, this formula gives a mathematical representation of the daily temperature oscillation in a desert, with the average temperature of 32.5 degrees Celsius plus a sinusoidal variation of 12.5 degrees Celsius around this average. It can be used to estimate the temperature at any time of day between midnight and noon, based on the number of hours since midnight.

To learn more about  desert temperature refer below

https://brainly.com/question/4152968

#SPJ11

The decrease in freezing point of a dilute solution compared to that of the pure solvent is called the freezing point depression. This phenomenon occurs because the presence of solute particles in the solution disrupts the crystal lattice structure of the solvent, which lowers its freezing point.

The magnitude of the freezing point depression is directly proportional to the molal concentration of the solute, which is defined as the number of moles of solute per kilogram of solvent. This relationship is described by the equation:

ΔTf = Kf × molality

where ΔTf is the freezing point depression, Kf is the cryoscopic constant (a constant characteristic of the solvent), and molality is the molal concentration of the solute.

Thus, the greater the concentration of solute particles in the solution, the greater the freezing point depression.

For more questions like concentration visit the link below:

https://brainly.com/question/30549424

#SPJ11

The velocity vector is momentarily zero (v⃗ = 0), so there is no specified direction.

To determine the direction of the velocity of a particle of the string at point B, consider the following steps:

1. Observe the wave and determine the direction it's moving. In this case, the wave is moving to the right.
2. Locate point B on the string and determine its position within the wave. As the wave moves, particles at the peaks or momentarily have zero velocity and are about to change their direction.
3. Analyze the motion of the particle at point B. If it's at a peak, it will move downwards; if it's at a trough, it will move upwards.

The direction of the velocity of a particle of string at point B depends on its position within the wave. If it's at a peak, the direction will be downwards (↓); if it's at a trough, the direction will be upwards (↑). If the particle is at a point with zero velocity, there is no specific direction associated with it.

To know more about velocity refer here:

https://brainly.com/question/17127206?#

#SPJ11

To collect data for the Synthesis of Aspirin experiment, you will measure the mass of salicylic acid, volume of acetic anhydride, mass of aspirin obtained, and the beginning and end of the melting point range for the product.

- Mass of salicylic acid used: 0.152 g
- Volume of acetic anhydride used: 0.36 mL
- Mass of aspirin obtained: 0.176 g
- Beginning of melting point range for product: 125.8 °C
- End of melting point range for product: 131.3 °C
Salicylic acid has a molar mass of 138.12 g/mol, and acetic anhydride has a molar mass of 102.09 g/mol. You can then calculate moles using the formula: moles = mass (g) / molar mass (g/mol).

Hence,  For the Synthesis of Aspirin experiment, collect data by measuring the mass of salicylic acid, volume of acetic anhydride, mass of aspirin obtained, and the beginning and end of the melting point range for the product.

learn more about Aspirin click here:
https://brainly.com/question/25794846

#SPJ11

The F-B-F bond angle in the BF−2 ion is approximately 120°, which is option c). This is due to the fact that the BF−2 ion has a trigonal planar molecular geometry, where the boron atom is at the center of the triangle and the three fluorine atoms are positioned at the vertices of the triangle.

This geometry is a result of the three electron pairs around the boron atom, which repel each other and push the fluorine atoms as far apart as possible.

The ideal bond angle for a trigonal planar molecular geometry is 120°. Therefore, the F-B-F bond angle in the BF−2 ion is close to 120°.

Understanding the molecular geometry and the electronic structure of a molecule or ion is crucial in predicting the properties and behavior of chemical substances in different chemical reactions.

To know more about F-B-F bond, refer here:

https://brainly.com/question/13782150#

#SPJ11

The increase in the concentrations of the reactants will increase the rate of the reaction. So, the correct answer is e. increasing the concentrations of the reactants.

The rate of a chemical reaction is the speed at which reactants are consumed and products are formed. The rate of a reaction can be increased by increasing the frequency of collisions between the reactant molecules, and this can be achieved by increasing the concentration of the reactants.

When the concentration of the reactants is increased, the number of reactant molecules per unit volume also increases, and this leads to an increase in the frequency of collisions between the reactant molecules. This, in turn, increases the probability that the reactant molecules will collide with enough energy to overcome the activation energy barrier and form products.

Therefore, increasing the concentrations of the reactants will increase the rate of the reaction. So, the correct answer is e. increasing the concentrations of the reactants.

For more such questions on concentrations

https://brainly.com/question/26255204

#SPJ11

The underlined carbon in the molecule c−−h3ccch2cooh is a sp3 hybridized carbon, which means that it has four hybrid orbitals. Therefore, we can predict that the ideal values for the bond angles about the underlined carbon atom would be approximately 109.5 degrees.

The provided molecule (C−H3CCH2COOH), the underlined carbon atom appears to be the second carbon in the sequence (the one bonded to three hydrogen atoms). This carbon is sp3 hybridized, meaning it forms four sigma bonds, in this case, three bonds with hydrogen atoms and one bond with another carbon atom. In an ideal sp3 hybridized carbon atom, the bond angles should be approximately 109.5 degrees. This is due to the tetrahedral arrangement of the four sigma bonds around the carbon atom, which results in the most stable, least repulsive configuration between the electron pairs.
So, the ideal values for the bond angles about the underlined carbon atom would be approximately 109.5 degrees.

learn more about bond angles here: brainly.com/question/31501310

#SPJ11

The additive that improves water's ability to penetrate porous materials such as bales of cotton, stacked hay, or mattresses and increases water's efficiency for heat absorption is a wetting agent or surfactant.


1. Wetting agents or surfactants are substances that reduce the surface tension of water, making it more effective at penetrating porous materials.
2. When added to water, these agents break the hydrogen bonds between water molecules, making the water "wetter."
3. As a result, the water can more easily penetrate porous materials like cotton bales, hay, or mattresses, reaching deeper into their structure.
4. This increased penetration allows for more efficient heat absorption, as the water can access and cool a larger portion of the material.
5. In firefighting applications, for example, wetting agents help water penetrate burning materials more effectively, making it easier to extinguish fires.

Wetting agents or surfactants are the additives that improve water's ability to penetrate porous materials and increase its efficiency for heat absorption.

To know more about heat absorption, refer

https://brainly.com/question/30836915

#SPJ11

The complete and balanced reaction AgC2H3O2(aq) + BaCl2(aq) → AgCl(s) + Ba(C2H3O2)2(aq) and CaBr2(aq) + K2CO3(aq) → CaCO3(s) + 2KBr(aq)

Part A:

AgC2H3O2(aq) + BaCl2(aq) → AgCl(s) + Ba(C2H3O2)2(aq)

Note: AgCl is insoluble and precipitates out of the solution as a solid.

Part B:

CaBr2(aq) + K2CO3(aq) → CaCO3(s) + 2KBr(aq)

Note: CaCO3 is insoluble and precipitates out of the solution as a solid.

A double-replacement reaction is a type of chemical reaction in which two ionic compounds in aqueous solution exchange ions to form two new compounds. The general form of a double-replacement reaction is:

AB + CD → AD + CB

where A, B, C, and D represent ions or compounds.

To learn more about chemical reactions:

https://brainly.com/question/13476520

#spj4

The molar composition of the constituents are:

Yield of the esterification reaction is 72.74%.

3.1. To determine the molar composition of the constituents at equilibrium, use balanced chemical equation for the esterification reaction :

A + B + H₂SO₄ → X + H₂O

From the equation, one mole of acid (A) and one mole of alcohol (B) react to form one mole of ester (X) and one mole of water.

Therefore, the initial moles of acid (A) and alcohol (B) are equal:

nA = mA / MA = 1.76 g / 60 g/mol = 0.0293 mol

nB = VB × dB / MB = 1.5 mL × 0.81 g/cm³ / 12 g/mol = 0.10125 mol

where MA and MB = molar masses of acid (A) and alcohol (B), respectively.

At equilibrium, 0.8 × 10⁻² mol of acid (A) is remaining, means 0.0293 - 0.008 = 0.0213 mol of acid (A) has reacted with alcohol (B) to form ester (X). Since the molar ratio of acid (A) to alcohol (B) is 1:1, the amount of alcohol (B) reacted also 0.0213 mol.

Therefore, the molar composition of the constituents at equilibrium is:

nA = 0.008 mol

nB = 0.08012 mol

nX = 0.0213 mol

nH₂O = 0.0213 mol

3.2. The yield of the esterification reaction can be calculated using the formula:

yield = (moles of ester formed / moles of limiting reactant) × 100%

In this case, the limiting reactant is acid (A), which has a stoichiometric coefficient of 1 in the balanced chemical equation. Therefore, the moles of ester formed is also 0.0213 mol. Thus, the yield of the reaction is:

yield = (0.0213 mol / 0.0293 mol) × 100% = 72.74%

3.3. According to Le Chatelier's principle, increasing the temperature will shift the equilibrium towards the products to absorb the excess heat. Therefore, increasing the temperature will increase the yield of the reaction and the amount of ester formed.

Find out more on molar composition here: https://brainly.com/question/29385601

#SPJ1

Batman would need 8.00 grams of bat neutralizer pellets to completely neutralize the sulfuric acid in the 0.500 L solution.

To calculate the mass of bat neutralizer pellets needed to neutralize the acid, we need to use stoichiometry and the balanced chemical equation for the reaction.

First, we need to determine the number of moles of sulfuric acid present in the 0.500 L solution using the given molarity of 0.200 M:

n(H₂SO₄) = M x V = 0.200 mol/L x 0.500 L = 0.100 mol

Since the reaction between sulfuric acid and sodium hydroxide is a 1:2 ratio, we need twice as many moles of sodium hydroxide for complete neutralization:

n(NaOH) = 2 x n(H₂SO₄) = 2 x 0.100 mol = 0.200 mol

Finally, we can calculate the mass of sodium hydroxide needed using its molar mass of 40.00 g/mol:

mass of NaOH = n(NaOH) x Molar mass of NaOH = 0.200 mol x 40.00 g/mol = 8.00 g

Therefore, Batman would need 8.00 grams of bat neutralizer pellets to completely neutralize the sulfuric acid in the 0.500 L solution.

To know more about sulfuric acid refer here:

https://brainly.com/question/30039513#

#SPJ11

The pH of a 0.15 M NH4Cl solution is 8.42.

The solution contains the NH4Cl salt which is the salt of a weak base (NH3) and strong acid (HCl). The NH4+ ion is acidic in nature and can undergo hydrolysis in water to produce H+ ions. The NH3 is a weak base, and it can accept the H+ ions produced in the solution to form NH4+ ions.

The hydrolysis reaction is as follows: NH4+ + H2O ⇌ NH3 + H3O+

Using the Kb expression for NH3, we can write:

Kb = [NH3][OH-] / [NH4+]

1.76 x 10^-5 = x^2 / (0.15 - x)

Assuming x is small, we can simplify to:

x = [OH-] = 1.33 x 10^-3 M

pOH = -log[OH-] = 2.88

pH = 14 - pOH = 11.12

Therefore, the pH of the solution is 11.12.

The solution contains the NaC2H3O2 salt, which is the salt of a weak acid (HC2H3O2) and strong base (NaOH). The acetate ion (C2H3O2-) is basic in nature and can undergo hydrolysis in water to produce OH- ions. The HC2H3O2 is a weak acid, and it can donate H+ ions in the solution.

The hydrolysis reaction is as follows: C2H3O2- + H2O ⇌ HC2H3O2 + OH-

Using the Ka expression for HC2H3O2, we can write:

Ka = [H+][C2H3O2-] / [HC2H3O2]

1.8 x 10^-5 = x^2 / (0.12 - x)

Assuming x is small, we can simplify to:

x = [H+] = 1.08 x 10^-4 M

pH = -log[H+] = 3.97

Therefore, the pH of the solution is 3.97.

The solution contains the NaCl salt, which is the salt of a strong acid (HCl) and strong base (NaOH). Since both the ions (Na+ and Cl-) are neutral in nature, the solution is neutral. Therefore, the pH of the solution is 7.

To learn more about pH, refer below:

https://brainly.com/question/15289741

#SPJ11

The water absorbed 12.775 kcal of heat as it was heated from 15°C to 88°C.

The amount of heat absorbed by the water can be calculated using the formula:

q = m * c * ΔT

where q is the heat absorbed (in calories), m is the mass of the water (in grams), c is the specific heat of water (1.00 cal/g°C), and ΔT is the change in temperature (in °C).

Substituting the given values, we get:

q = 175 g * 1.00 cal/g°C * (88°C - 15°C)

q = 175 g * 1.00 cal/g°C * 73°C

q = 12,775 cal

To convert calories to kilocalories, we divide by 1000:

q = 12,775 cal / 1000 = 12.775 kcal

To know more about specific heat click on below link:

https://brainly.com/question/11297584#

#SPJ11

The following statement is "Inhibiting Na+/K+ pumps in the basolateral membranes of distal tubule epithelial cells would increase the volume of urine production by the kidneys." is True.

Inhibition of Na+/K+ pumps in the basolateral membranes of distal tubule epithelial cells will reduce the reabsorption of sodium ions from the tubular fluid into the blood, thereby increasing the concentration of sodium ions in the tubular fluid.

This will reduce the osmotic gradient for water reabsorption and increase the amount of water that will remain in the tubular fluid and eventually be excreted as urine. Therefore, the volume of urine production by the kidneys will increase.

Here you can learn more about basolateral membranes

https://brainly.com/question/28234377#

#SPJ11  

As the reaction mechanism involves electrophilic addition and carbocation stabilization via resonance, which reports in exclusive formation of (1-bromopropyl)benzene and prevents the formation of other regioisomers.

The reaction you're referring to is the addition of HBr to 1-phenylpropene, which results in the exclusive formation of (1-bromopropyl)benzene.

This reaction proceeds through a two-step mechanism involving electrophilic addition and carbocation rearrangement:

1. Electrophilic addition: HBr reacts with the double bond of 1-phenylpropene, breaking the π bond and forming a carbocation intermediate.

The hydrogen atom attaches to the less substituted carbon of the double bond, following Markovnikov's rule. This generates a secondary carbocation at the benzylic position.

2. Carbocation rearrangement: The secondary carbocation formed in the first step is stabilized through resonance with the phenyl ring.

This stabilization prevents further rearrangement or attack at the more substituted carbon, leading to the exclusive formation of the observed product, (1-bromopropyl)benzene.

In conclusion, the reaction mechanism involves electrophilic addition and carbocation stabilization via resonance, which results in the exclusive formation of (1-bromopropyl)benzene and prevents the formation of other regioisomers.

To learn more about benzene, refer below:

https://brainly.com/question/14944833

#SPJ11

Planck's equation demonstrates mathematically that the energy of a quantum is related to the frequency of the emitted radiation.

Einstein went further by explaining that, in addition to its wave like characteristics, a beam of light can be thought of as a stream of particles called photons. Planck's equation is used to calculate the energy of a photon based on its frequency:

E = hν

where E is the energy of the photon, ν is the frequency of the radiation, and h is Planck's constant.

Einstein built upon Planck's equation by proposing that light could have both wave-like and particle-like properties. He suggested that light could be thought of as a stream of particles called photons, each with a discrete amount of energy given by Planck's equation. This idea helped to explain certain phenomena, such as the photoelectric effect, which could not be explained by wave theory alone.

To know more about the Einstein, here

https://brainly.com/question/2058557

#SPJ4

The statement "Osmotic pressure measurements are commonly used to determine the molecular weights of proteins and polymers" is false because osmotic pressure is a property of solutions and is not directly related to the molecular weight of proteins or polymers.

There are other methods that are commonly used to determine the molecular weights of proteins and polymers, such as gel permeation chromatography (GPC), size exclusion chromatography (SEC), and mass spectrometry.

These methods rely on principles such as separation based on size, molecular weight, or charge, and provide more accurate and precise measurements of molecular weights compared to osmotic pressure measurements.

Therefore, the correct answer is b. False, as osmotic pressure measurements are not commonly used to determine the molecular weights of proteins and polymers.

To know more about Osmotic pressure refer here:

https://brainly.com/question/15501096#

#SPJ11

Based on the information provided, we can predict that the 0.25 m solution of sugar sucrose in water will not conduct electricity.

This is because sugar (sucrose) does not dissociate into ions in solution, which are necessary for conductivity to occur. The bulb wires solution being tested plugged into a wall outlet is simply a means of providing electricity to the circuit, but the sugar solution will not allow the electricity to flow through it due to its lack of conductivity.
A 0.25 M solution of the sugar sucrose (C12H22O11) in water is tested for conductivity using an apparatus with bulb, wires, and the solution being tested, plugged into a wall outlet. I predict that the bulb will not light up because sugar sucrose is a non-electrolyte and does not dissociate into ions in water, resulting in low conductivity.

Visit here to learn more about conductivity:

brainly.com/question/12136944

#SPJ11

The mass percent of iron in the 500-gram iron ore sample is 48.4%.

To calculate the mass percent of iron in the 500-gram iron ore sample, you can use the following formula:

Mass percent = (mass of iron / total mass of sample) × 100

In this case, the mass of iron is 242 grams and the total mass of the sample is 500 grams. So the calculation is:

Mass percent = (242 grams / 500 grams) × 100

Mass percent = 0.484 × 100

Mass percent = 48.4%

Therefore, in the 500-gram iron ore sample, the mass percent of iron is 48.4%.

Learn more about mass percent here: https://brainly.com/question/26150306

#SPJ11

The pH of the solution after adding 0.190 moles of NaOH can be calculated as 9.25.

The reaction that takes place between NH₃ and NH₄Cl in water is given by:

NH₃ + H₂O ⇌ NH₄⁺ + OH⁻

Initially, the solution contains both NH₃ and NH₄⁺ ions in equilibrium with each other. When NaOH is added, it reacts with NH₄⁺ to form NH₃ and water:

NaOH + NH₄⁺ → NH₃ + H₂O + Na⁺

This reaction shifts the equilibrium of NH₃ and NH₄⁺ towards the formation of more NH₃. As a result, the concentration of NH₃ increases while the concentration of NH₄⁺ decreases.

To calculate the new concentration of NH₃ and NH₄⁺, we need to use the stoichiometry of the reaction between NaOH and NH₄⁺. For every mole of NaOH added, one mole of NH₄⁺ is consumed and converted to NH₃. Therefore, the final concentration of NH₃ can be calculated as follows:

[NaOH] = 0.190 mol / 1.0 L = 0.190 M

Since the reaction between NaOH and NH₄⁺ is 1:1, the concentration of NH₄⁺ is reduced by the same amount:

[NH₄⁺] = 0.540 M - 0.190 M = 0.350 M

The concentration of NH₃ is increased by the same amount as the amount of NaOH added, since every mole of NaOH converts one mole of NH₄⁺ to NH₃:

[NH₃] = 0.690 M + 0.190 M = 0.880 M

Now we can use the equilibrium constant expression for the reaction of NH₃ with water to calculate the concentration of hydroxide ions:

Kb = [NH₄⁺][OH⁻] / [NH₃]

At 25 °C, the Kb of NH₃ is 1.8 × 10⁻⁵. Rearranging the above expression to solve for [OH⁻], we get:

[OH⁻] = Kb[NH₃] / [NH₄⁺]

Plugging in the values, we get:

[OH⁻] = (1.8 × 10⁻⁵)(0.880 M) / (0.350 M) = 4.56 × 10⁻⁵ M

Finally, we can use the expression for the ion product of water to calculate the pH:

pH = 14 - pOH = 14 - log([OH⁻]) = 9.25

Therefore, the pH of the solution after adding 0.190 moles of NaOH is 9.25.

To know more about stoichiometry refer here:

https://brainly.com/question/30215297#

#SPJ11

A phenol has a hydroxyl (-OH) group attached to a benzene ring.

This hydroxyl group makes phenols unique from other benzene derivatives, as it is a functional group that allows for various chemical reactions. The hydroxyl group in phenol is polar, which makes it able to form hydrogen bonds with other polar molecules.

This property of phenols allows them to dissolve in water and other polar solvents. Furthermore, the hydroxyl group can undergo reactions such as esterification, oxidation, and substitution. These reactions make phenols useful in various applications, including pharmaceuticals, dyes, and preservatives. Overall, the hydroxyl group in phenols plays a crucial role in determining the properties and applications of these compounds.

to know more about hydroxyl OH pls visit

https://brainly.com/question/4682253

#SPJ11

The internal energy of the helium in the balloon is 258.3J greater at 0.195 atm gauge pressure.

To determine how much greater the internal energy of the helium in the balloon is at 0.195 atm gauge pressure compared to zero gauge pressure, we need to follow these steps:

Step 1: Convert gauge pressure to absolute pressure.
Absolute pressure = Gauge pressure + Atmospheric pressure
Assuming standard atmospheric pressure (1 atm), we get:
Absolute pressure = 0.195 atm + 1 atm = 1.195 atm

Step 2: Use the Ideal Gas Law to find the initial and final number of moles of helium.
PV = nRT
Where P is pressure, V is volume, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature (in Kelvin). Assuming room temperature (25°C or 298 K), we can calculate the initial and final number of moles (n1 and n2) using the initial (0 atm) and final (1.195 atm) absolute pressures.

Initial: (0 + 1) atm * 8.5 L

      = n1 * 0.0821 L atm/mol K * 298 K

Final: 1.195 atm * 8.5 L

    = n2 * 0.0821 L atm/mol K * 298 K

Solving for n1 and n2, we get:
n1 ≈ 0.346 mol
n2 ≈ 0.412 mol

Step 3: Calculate the change in internal energy (ΔU) using the equation:
ΔU = (n2 - n1) * (3/2) * R * T

Plugging in the values, we get:
ΔU = (0.412 mol - 0.346 mol) * (3/2) * (8.314 J/mol K) * 298 K

ΔU ≈ 258.3 J

So, the internal energy of the helium in the balloon is 258.3 J greater at 0.195 atm gauge pressure than it would be at zero gauge pressure.

To know more about internal energy refer here:

https://brainly.com/question/27950155?#

#SPJ11

The molarity of the solution after adding 175.0 ml of water to 95.00 ml of a 0.157 m solution is 0.0553 M.

To calculate the molarity of the solution, we first need to calculate the moles of the solute (the substance being dissolved) in the original solution.
moles = molarity x volume (in liters)
moles = 0.157 mol/L x 0.09500 L
moles = 0.01492 mol
Next, we need to calculate the total volume of the solution after adding 175.0 ml of water.
total volume = 175.0 ml + 95.00 ml
total volume = 270.0 ml
Since the volume is in milliliters, we need to convert it to liters for use in the molarity equation.
total volume = 270.0 ml x 1 L/1000 ml
total volume = 0.270 L
Finally, we can use the moles of solute and the total volume to calculate the molarity of the diluted solution.
molarity = moles of solute / total volume
molarity = 0.01492 mol / 0.270 L
molarity = 0.0553 M
Therefore, the molarity of the solution after adding 175.0 ml of water to 95.00 ml of a 0.157 m solution is 0.0553 M.

Learn more about molarity at

brainly.com/question/4401006

#SPJ11

Li would attain the noble-gas configuration of helium (1s²), Na would attain the noble-gas configuration of neon (2s²2p⁶), Br would attain the noble-gas configuration of krypton (3s²3p⁶3d¹⁰4s²4p⁶) and Sr would attain the noble-gas configuration of krypton (4s²3d¹⁰4p⁶).

When atoms of certain elements react to form an ionic compound, they tend to lose or gain electrons in order to achieve a stable electronic configuration similar to that of a noble gas.

The noble gases have completely filled outermost electron shells and are thus chemically inert. Therefore, in order to achieve a similar electronic configuration, atoms of other elements tend to gain or lose electrons to either achieve a completely filled outer shell or an empty outer shell.

a. Lithium (Li) has one valence electron and is likely to lose it to attain the stable electron configuration of helium (He).

b. Sodium (Na) has one valence electron and is likely to lose it to attain the stable electron configuration of neon (Ne).

c. Bromine (Br) has seven valence electrons and is likely to gain one electron to attain the stable electron configuration of krypton (Kr).

d. Strontium (Sr) has two valence electrons and is likely to lose them to attain the stable electron configuration of krypton (Kr).

To know more about noble-gas configuration refer to-

https://brainly.com/question/7036466

#SPJ11

Answer:

Sure, I can draw the organic product you asked for. Here it is:

CH3COO-K+ + Cr3+ + 5H2O

The organic product expected from the reaction of CH₃CH₂CH₂OH with K₂Cr₂O₇(aq) is CH₃CH₂COOH.

This is a result of the alcohol group being oxidized to a carboxylic acid group. The K₂Cr₂O₇(aq) acts as an oxidizing agent, providing the necessary oxygen to remove hydrogen from the alcohol and form a double bond with the carbon. The hydrogen atoms are replaced by the oxygen molecule, creating a carboxylic acid group.

The reaction is commonly known as the Jones oxidation and is used to convert primary alcohols into carboxylic acids.

It is important to note that the reaction is carried out under acidic conditions to promote the oxidation of the alcohol group. The balanced equation for the reaction is: 3CH₃CH₂CH₂OH + 2K₂Cr₂O₇(aq) + 8H₂SO₄ → 3CH₃CH₂COOH + 2Cr₂(SO₄)₃ + 2K₂SO₄ + 11H₂O.

To know more about Jones oxidation click on below link:

https://brainly.com/question/31316740#

#SPJ11