Explanation:
In a parallel circuit, each lamp is connected to the power source independently, meaning that the lamps are not directly connected to each other. Therefore, if one lamp filament breaks in this setup, the other three lamps will continue to work unaffected.
When the filament of one lamp breaks, it essentially opens the circuit for that particular lamp. However, the remaining lamps are still connected in parallel, so the current can flow through them independently. The other lamps will continue to receive electricity from the power source and light up normally.
This behavior is a characteristic of parallel circuits, where each component has its own individual connection to the power source. If the lamps were connected in series, the situation would be different. In a series circuit, a break in one lamp's filament would interrupt the flow of current throughout the entire circuit, and all the lamps would go out.
A 2100 kg truck is travelling at 31m/s [E] and collides with a 1500 kg car travelling 24m/s[E]. The two vehicles lock bumpers and continue as one object. What is the decrease in kinetic energy during the inelastic collision?
A 2100 kg truck is moving at 31m/s[E] and crashes into a 1500 kg car traveling at 24m/s[E]. The two cars lock bumpers and continue as one object. The decrease in kinetic energy during the inelastic collision is 870194 J. The law of conservation of momentum is used to determine the final velocity of the combined vehicles.
An inelastic collision is one in which the kinetic energy is not conserved. Instead of bouncing off each other, the two colliding objects stick together after the collision. The decrease in kinetic energy during an inelastic collision is related to the amount of energy that is transformed into other forms such as sound, heat, or deformation energy. During the inelastic collision between a 2100 kg truck and a 1500 kg car, the two vehicles lock bumpers and continue as one object. First, it is necessary to calculate the total initial kinetic energy before the collision occurs. Kinetic energy = 0.5 x mass x velocity²The kinetic energy of the truck before the collision = 0.5 x 2100 kg x (31 m/s)² = 1013395 J. The kinetic energy of the car before the collision = 0.5 x 1500 kg x (24 m/s)² = 864000 JThe total initial kinetic energy = 1013395 J + 864000 J = 1877395 JThe total mass of the two vehicles after the collision = 2100 kg + 1500 kg = 3600 kg. Now, we can calculate the final velocity of the combined vehicles after the collision using the law of conservation of momentum: Momentum before collision = Momentum after collision2100 kg x 31 m/s + 1500 kg x 24 m/s = 3600 kg x vfVf = (2100 kg x 31 m/s + 1500 kg x 24 m/s) / 3600 kgVf = 26.08 m/sThe kinetic energy of the combined vehicles after the collision = 0.5 x 3600 kg x (26.08 m/s)² = 1007201 J. Therefore, the decrease in kinetic energy during the inelastic collision is 1877395 J - 1007201 J = 870194 J.For more questions on kinetic energy
https://brainly.com/question/8101588
#SPJ8
An object with initial momentum 2 kgm/s to the left is acted upon by a force F = 48 N to the right for a short time interval, At. a At the end of this time interval, the momentum of the object is 4 kgm/s to the right. How long was the time interval, At ? O 1/8 s O 1/6 s O 1/12 s O 1/4 s O 1/2 s O 1/24 s o 1/16 s
The initial momentum of an object is 2 kgm/s to the left. A force of 48 N is applied to the right for a short time interval. The final momentum of the object is 4 kgm/s to the right. The duration of the time interval is 1/8 s.
According to Newton's second law of motion, the change in momentum of an object is equal to the product of the force acting on it and the time interval during which the force is applied. In this case, the initial momentum of the object is 2 kgm/s to the left, and the force acting on it is 48 N to the right. The final momentum of the object is 4 kgm/s to the right.
Using the equation
Δp = F * At,
where Δp is the change in momentum, F is the force, and At is the time interval, solving for At.
The change in momentum is given by
Δp = final momentum - initial momentum = 4 kgm/s - (-2 kgm/s) = 6 kgm/s.
The force F is 48 N.
Substituting these values into the equation, we have 6 kgm/s = 48 N * At.
Solving for At,
At = (6 kgm/s) / (48 N) = 1/8 s.
Therefore, the time interval, At, is 1/8 s.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
A rectangular loop of wire with current going clockwise in loop Has dimensions 40cm by 30 cm. If the current is 5A in the loop,
a) Find the magnitude and direction of the magnetic field due to each piece of the rectangle.
b) The net field due to all 4 sides.
a) The magnetic field at any point on the sides of a straight conductor is directly proportional to the current in the conductor and inversely proportional to the distance of the point from the conductor. Magnetic field due to each piece of the rectangle can be given by;
B = μ₀I/2πr
where B is the magnetic field at any point on the rectangle sides, μ₀ is the magnetic constant, I is the current flowing in the loop, r is the distance of the point from the rectangle sides, Length of the rectangle L = 40 cm, Width of the rectangle W = 30 cm,
Current in the loop, I = 5A
We need to find the magnetic field at each of the four sides of the rectangle Loop around the rectangle sides 1 and 3:Loop around the rectangle sides 2 and 4:Therefore, the magnetic field on each side of the rectangle is given below:
i. Magnetic field on the sides with length L= 40 cm i. Magnetic field on the sides with width W= 30 cm
b) The net field due to all 4 sides: The direction of the magnetic field due to sides 2 and 4 is opposite to that due to sides 1 and 3. Therefore, the net magnetic field on the sides with length is given by; Net field due to the two sides of the rectangle with the length = 2.34×10^-5 T - 2.34×10^-5 T. Net field due to the two sides of the rectangle with the length = 0 T.
Net magnetic field due to all 4 sides of the rectangle = Net field due to the two sides of the rectangle with length - Net field due to the two sides of the rectangle with width
= (2.34×10^-5 - 2.34×10^-5) T - (0 + 0) T
= 0 T.
Therefore, the net magnetic field due to all four sides is zero. The direction of the magnetic field is perpendicular to the plane of the rectangle.
Learn more about magnetic field: https://brainly.com/question/14411049
#SPJ11
The clarinet is well-modeled as a cylindrical pipe that is open at one end and closed at the other. For a clarinet's whose air column has an effective length of 0.407 m, determine the wavelength λm=3 and frequency fm=3 of the third normal mode of vibration. Use 346 m/s for the speed of sound inside the instrument.
Answer: The wavelength (λm=3) is 0.2713 m and the frequency (fm=3) is 850.86 Hz.
In an open ended cylindrical pipe, the wavelength of the nth harmonic can be calculated using: L = (nλ)/2
Where; L = effective length of the pipeλ = wavelength of the nth harmonic n = mode of vibration.
The frequency of the nth harmonic can be determined using the formula given below; f = nv/2L
Where; f = frequency of the nth harmonic
n = mode of vibration
v = speed of sound
L = effective length of the pipe
Here, the mode of vibration is given to be 3 and the speed of sound inside the instrument is 346 m/s. Therefore, the wavelength of the third harmonic can be: L = (3λ)/2λ = (2L)/3λ = (2 × 0.407)/3λ = 0.2713 m.
The frequency of the third harmonic can be determined as: f = (3 × 346)/(2 × 0.407)f = 850.86 Hz.
Therefore, the wavelength (λm=3) is 0.2713 m and the frequency (fm=3) is 850.86 Hz.
Learn more about wavelength : https://brainly.com/question/10750459
#SPJ11
What did Enrico Fermi ask? Where are they? How does hydrogen fuse to helium? How can a black hole form from a star? Question 39 What is the purpose of a telescope objective? To spectrally disperse light into constituent wavelengths. To gather together light rays from distant sources and concentrate them to a focus. To serve as a magnifying lens to view tiny cosmic objects. Question 40 Right ascension and declination are coordinates that mark the positions of places on the Earth. places on the celestial sphere. places on the sky with respect to an observer's local horizon
Enrico Fermi, an Italian physicist, is renowned for his work in radioactivity and nuclear physics. Fermi played a key role in the Manhattan Project, which resulted in the creation of the first nuclear weapon.
Fermi used his expertise in nuclear physics to ask two significant questions: "Where are they?" and "How does hydrogen fuse to helium?"The first question, "Where are they?" referred to extraterrestrial beings. Fermi speculated that given the vastness of the universe, it's highly probable that other forms of life exist. However, Fermi noted that despite the high probability of extraterrestrial life, humans have not yet had any interactions with extraterrestrial life.
Fermi's paradox, also known as the Fermi-Hart paradox, is the conflict between the high probability of extraterrestrial life and the lack of contact.The second question, "How does hydrogen fuse to helium?" is about nuclear fusion. Hydrogen atoms join together to create helium, a process known as nuclear fusion.
This process powers the sun and other stars, allowing them to emit light and heat. However, nuclear fusion also requires an immense amount of heat and pressure to occur. Scientists are attempting to harness nuclear fusion to create a new form of energy.
The purpose of a telescope objective is to gather light rays from distant sources and concentrate them to a focus. The objective is the most crucial component of a telescope, as it determines how much light the telescope can gather. The larger the objective, the more light the telescope can collect. Right ascension and declination are coordinates that mark the positions of places on the celestial sphere. These coordinates are used to locate celestial objects, such as stars and galaxies.
To know more about nuclear physics :
brainly.com/question/29134126
#SPJ11
The simulation does not provide an ohmmeter to measure resistance. This is unimportant for individual resistors because you can click on a resistor to find its resistance. But an ohmmeter would help you verify your rule for the equivalent resistance of a group of resistors in parallel (procedure 5 in the Resistance section above). Since you have no ohmmeter, use Ohm's law to verify your rule for resistors in parallel.
Ohm's law can be used to verify our rule for resistors in parallel.
How to verify with Ohm's law?Recall that the rule for resistors in parallel is that the equivalent resistance is equal to the reciprocal of the sum of the reciprocals of the individual resistances.
For example, if there are two resistors in parallel, R₁ and R₂, the equivalent resistance is:
R_eq = 1 / (1/R₁ + 1/R₂)
Verify this rule using Ohm's law.
V = IR
where V is the voltage, I is the current, and R is the resistance.
If a voltage source V connected to two resistors in parallel, R1 and R₂, the current through each resistor will be:
I₁ = V / R₁
I₂ = V / R₂
The total current through the circuit will be the sum of the currents through each resistor:
I_total = I₁ + I₂
Substituting the equations for I₁ and I₂, get the following equation:
I_total = V / R₁ + V / R₂
Rearrange this equation to get the following equation for the equivalent resistance:
R_eq = V / I_total = 1 / (1/R₁ + 1/R₂)
This is the same equation for the equivalent resistance of two resistors in parallel as the rule stated earlier.
Find out more on Ohm's law here: https://brainly.com/question/231741
#SPJ4
What is the relationship between power and energy? Describe an example of where power (and efficiency) calculations are important in society.
What is the speed of a 5.0 kg ball if its kinetic energy is 40 J?
Work is equal to:
A. The change in energy in a system.
B. The total energy in a system.
C. The type of energy in a system
D. Work and energy are not related.
The relationship between power(P) and energy(E) is P = W/t. An example where power and efficiency calculations are important in society is the field of transportation. The speed of a 5.0 kg ball when its kinetic energy is 40 J, is 4 m/s. Work is equal to the change in energy in a system i.e., Option A is the correct answer.
The relationship between power and energy can be described as follows:
Power is the rate at which energy is transferred or work is done.
In other words, power measures how quickly energy is being used or produced.
Mathematically, power (P) is defined as the amount of energy (E) transferred or work (W) done per unit of time (t), represented as P = E/t or P = W/t.
Therefore, power and energy are related through the concept of time.
An example where power and efficiency calculations are important in society is the field of transportation.
For instance, in the automotive industry, calculating the power output and efficiency of an engine is crucial.
Power calculations help determine the engine's capability to generate the necessary force to propel the vehicle, while efficiency calculations measure how effectively the engine converts fuel energy into useful work.
These calculations aid in designing more fuel-efficient engines, improving performance, and reducing environmental impact.
To find the speed of a 5.0 kg ball given its kinetic energy of 40 J, we can use the equation for kinetic energy (KE) which is given by KE = (1/2)m[tex]v^2[/tex], where m is the mass of the object and v is its velocity or speed.
Rearranging the equation, we have v = [tex]\sqrt[/tex](2KE/m). Plugging in the values, we get v = [tex]\sqrt[/tex]((2 * 40 J) / 5.0 kg) = [tex]\sqrt[/tex](16) = 4 m/s.
Work is equal to the change in energy in a system. Option A is the correct answer.
When work is done on or by a system, it results in a change in energy. Work transfers energy from one form to another or changes the energy within the system.
Therefore, work and energy are indeed related.
Learn more about speed here:
https://brainly.com/question/13943409
#SPJ11
An inductor in the form of a solenoid contains 400 turns and is 15.4 cm in length. A uniform rate of decrease of current through the inductor of 0.421 A/s induces an emf of 175 PV. What is the radius of the solenoid? mm
Given: Number of turns (N) = 400, Length of solenoid (l) = 15.4 cm = 0.154 m, Rate of change of current (dI/dt) = 0.421 A/s, Induced emf (emf) = 175 PV = 175 * 10^(-12) V.
Using the formula L = (μ₀ * N² * A) / l . We can solve for the radius (R) using the formula for the cross-sectional area (A) of a solenoid:
R = √(A / π) the radius of the solenoid is approximately 0.318 mm.
To find the radius of the solenoid, we can use the formula for the self-induced emf in an inductor:
emf = -L * (dI/dt)
Where: emf is the induced electromotive force (in volts),
L is the self-inductance of the solenoid (in henries),
dI/dt is the rate of change of current through the inductor (in amperes per second).
We are given:
emf = 175 PV (pico-volts) = 175 * 10⁻¹² V,
dI/dt = 0.421 A/s,
Number of turns, N = 400,
Length of solenoid, l = 15.4 cm = 0.154 m.
Now, let's calculate the self-inductance L:
emf = -L * (dI/dt)
175 * 10⁻¹² V = -L * 0.421 A/s
L = (175 * 10⁻¹² V) / (0.421 A/s)
L = 4.15 * 10⁻¹⁰ H
The self-inductance of the solenoid is 4.15 * 10⁻¹⁰ H.
The self-inductance of a solenoid is given by the formula:
L = (μ₀ * N² * A) / l
Where:
μ₀ is the permeability of free space (μ₀ = 4π * 10⁻⁷ T·m/A),
N is the number of turns,
A is the cross-sectional area of the solenoid (in square meters),
l is the length of the solenoid (in meters).
We need to solve this equation for the radius, R, of the solenoid.
Let's rearrange the formula for self-inductance to solve for A:
L = (μ₀ * N² * A) / l
A = (L * l) / (μ₀ * N²)
Now, let's substitute the given values and calculate the cross-sectional area, A:
A = (4.15 * 10⁻¹⁰ H * 0.154 m) / (4π * 10⁻⁷ T·m/A * (400)^2)
A ≈ 4.01 * 10⁻⁸ m²
The cross-sectional area of the solenoid is approximately 4.01 * 10⁻⁸ m².
The cross-sectional area of a solenoid is given by the formula:
A = π * R²
We can solve this equation for the radius, R, of the solenoid:
R = √(A / π)
Let's calculate the radius using the previously calculated cross-sectional area, A:
R = √(4.01 * 10⁻⁸ m² / π)
R ≈ 3.18 * 10⁻⁴ m
To convert the radius to millimeters, multiply by 1000:
Radius = 3.18 * 10⁻⁴ m * 1000
Radius ≈ 0.318 mm
The radius of the solenoid is approximately 0.318 mm.
Learn more about solenoid here
https://brainly.com/question/15504705
#SPJ11
In a perfect conductor, electric field is zero everywhere. (a) Show that the magnetic field is constant (B/at = 0) inside the conductor. (5 marks) (b) Show that the current is confined to the surface. (5 marks) (c) If the sphere is held in a uniform magnetic field Bî. Find the induced surface current density
(a) Inside a perfect conductor, the electric field is zero. From Faraday's law, ∇ × E = -∂B/∂t. Since ∇ × E = 0, we have -∂B/∂t = 0, which implies that the magnetic field B is constant inside the conductor.
(b) According to Ampere's law, ∇ × B = μ₀J, where J is the current density. Since B is constant inside the conductor , ∇ × B = 0. Therefore, μ₀J = 0, which implies that the current density J is zero inside the conductor. Hence, the current is confined to the surface.
(c) When a conductor is moved in a uniform magnetic field, an induced current is produced to oppose the change in magnetic flux. The induced surface current density J_induced can be found using
J_induced = σE_induced
Since the sphere is held in a uniform magnetic field Bî, the induced electric field E_induced is given by E_induced = -Bv.
Therefore, the induced surface current density J_induced = -σBv, where σ is the conductivity of the sphere.
Learn more about electric field here:
https://brainly.com/question/28027633
#SPJ11
Required information Photoelectric effect is observed on two metal surfaces. Light of wavelength 300.0 nm is incident on a metal that has a work function of 2.70 eV. What is the maximum speed of the emitted electrons? m/s
The maximum speed of the emitted electrons, resulting from the photoelectric effect when light with a wavelength of 300.0 nm is incident on a metal, is approximately 5.94 x [tex]10^{5}[/tex] m/s.
The maximum speed of the emitted electrons can be determined using the equation for the kinetic energy of an electron in the photoelectric effect: KE = hν - Φ, where KE is the kinetic energy of the electron, h is Planck's constant, ν is the frequency of the incident light (which can be calculated using the speed of light and the wavelength), and Φ is the work function of the metal.
First, we need to calculate the frequency of the incident light. The speed of light can be given as c = λν, where c is the speed of light, λ is the wavelength of the light, and ν is the frequency. Rearranging the equation, we find ν = c/λ. Substituting the given values, the frequency is ν = (3.00 x [tex]10^{8}[/tex]m/s) / (300.0 x [tex]10^{-9}[/tex] m) = 1.00 x [tex]10^{15}[/tex] Hz.
Next, we can calculate the kinetic energy of the emitted electron using KE = (6.63 x [tex]10^{-34}[/tex]J s) * (1.00 x [tex]10^{15}[/tex] Hz) - (2.70 eV * 1.60 x [tex]10^{-19}[/tex] J/eV). Converting the electron volt (eV) to joules (J), the kinetic energy is approximately 9.35 x [tex]10^{-19}[/tex] J.
Finally, we can calculate the maximum speed of the emitted electrons using the equation KE = (1/2)m[tex]v^{2}[/tex], where m is the mass of the electron. Rearranging the equation, we find [tex]v = \sqrt{\frac{2K.E}{m} }[/tex].Substituting the values, the maximum speed of the emitted electrons is approximately 5.94 x [tex]10^{5}[/tex] m/s.
Learn more about photoelectric here:
https://brainly.com/question/9260704
#SPJ11
Which of the following values of the phase constant o for a sinusoidally driven series RLC circuit, would be for a primarily capacitive load circuit? A) -150; B) +35.; C)*/3 rad; D) 1/6 rad. Answer
The primarily capacitive load circuit would have a phase constant of -150 degrees.
In a sinusoidally driven series RLC circuit, the phase constant determines the phase relationship between the current and voltage. A primarily capacitive load circuit is characterized by a leading current, meaning that the current waveform leads the voltage waveform. This implies that the phase constant should be negative.
Among the given options, the phase constant of -150 degrees corresponds to a primarily capacitive load circuit. A negative phase constant indicates that the current leads the voltage by 150 degrees.
This is characteristic of a circuit dominated by capacitive reactance.The other options (+35 degrees, */3 radians, and 1/6 radians) do not indicate a primarily capacitive load circuit.
Positive values for the phase constant would imply a lagging current, which is indicative of inductive loads. Therefore, the correct choice for a primarily capacitive load circuit is option A) -150 degrees.
Learn more about capacitive here ;
https://brainly.com/question/31871398
#SPJ11
A playground carousel has a radius of 2.7 m and a rotational inertia of 148 kg m². It initially rotates at 0.94 rad/s when a 24-kg child crawls from the center to the edge. When the boy reaches the edge, the angular velocity of the carousel is: From his answer to 2 decimal places.
Answer: The angular velocity when the child reaches the edge of the carousel is 0.32 rad/s.
Radius r = 2.7 m
Rotational inertia I = 148 kg m²
Angular velocity ω1 = 0.94 rad/s
Mass of the child m = 24 kg
The angular momentum is: L = I ω
Where,L = angular momentum, I = moment of inertia, ω = angular velocity.
Initially, the angular momentum is:L1 = I1 ω1
When the child moves to the edge of the carousel, the moment of inertia changes.
I2 = I1 + m r² where, m = mass of the child, r = radius of the carousel. At the edge, the new angular velocity is,
ω2 = L1/I2 Substituting the values in the above formulas:
L1 = 148 kg m² x 0.94 rad/s
L1 = 139.12 kg m²/s
I2 = 148 kg m² + 24 kg x (2.7 m)²
I2 = 437.52 kg m²
ω2 = 139.12 kg m²/s ÷ 437.52 kg m²
ω2 = 0.3174 rad/s.
The angular velocity of the carousel when the child reaches the edge is 0.32 rad/s.
Therefore, the angular velocity when the child reaches the edge of the carousel is 0.32 rad/s.
Learn more about moment of inertia: https://brainly.com/question/14460640
#SPJ11
A Jaguar XK8 convertible has an eight-cylinder engine. At the beginning of its compression stroke, one of the cylinders contains 496 cm3cm3 of air at atmospheric pressure (1.01×105Pa1.01×105Pa) and a temperature of 27.0 ∘C∘C. At the end of the stroke, the air has been compressed to a volume of 46.9 cm3cm3 and the gauge pressure has increased to 2.70×106 PaPa .
At the end of the compression stroke, the air temperature is approximately 747.6 K, and the gauge pressure is 2.70 × [tex]10^6[/tex] Pa. To solve this problem, we can use the ideal gas law, which states:
PV = nRT
Where:
P = Pressure
V = Volume
n = Number of moles of gas
R = Ideal gas constant
T = Temperature in Kelvin
First, let's convert the temperature from Celsius to Kelvin:
T1 = 27.0°C + 273.15 = 300.15 K (initial temperature)
T2 = T1 (since the compression stroke is adiabatic, there is no heat exchange, so the temperature remains constant)
Now, let's calculate the number of moles of air using the ideal gas law for the initial state:
P1 = 1.01 × [tex]10^5[/tex] Pa (atmospheric pressure)
V1 = 496 cm³
Convert the volume to cubic meters (m³):
V1 = 496 cm³ × (1 m / 100 cm)³ = 4.96 × 10⁻⁴ m³
R = 8.314 J/(mol·K) (ideal gas constant)
n = (P1 * V1) / (R * T1)
n = (1.01 × 10⁵ Pa * 4.96 × 10⁻⁴ m³) / (8.314 J/(mol·K) * 300.15 K)
n ≈ 0.0207 moles
Since the number of moles remains constant during the adiabatic compression, n1 = n2.
Now, we can calculate the final volume and pressure using the given values:
V2 = 46.9 cm³ × (1 m / 100 cm)³ = 4.69 × 10⁻⁵ m³
P2 = 2.70 × 10⁶ Pa (gauge pressure)
Now, we can use the ideal gas law again for the final state:
n2 = (P2 * V2) / (R * T2)
0.0207 moles = (2.70 × 10⁶ Pa * 4.69 × 10⁻⁵ m³) / (8.314 J/(mol·K) * 300.15 K)
Solving for T2:
T2 = (2.70 × 10⁶ Pa * 4.69 × 10⁻⁵ m³) / (8.314 J/(mol·K) * 0.0207 moles)
T2 ≈ 747.6 K
Therefore, at the end of the compression stroke, the air temperature is approximately 747.6 K, and the gauge pressure is 2.70 × 10⁶ Pa.
To learn more about ideal gas law visit:
brainly.com/question/30458409
#SPJ11
An acgenerator has a frequency of 6.5kHz and a voltage of 45 V. When an inductor is connected between the terminals of this generator, the current in the inductor is 65 mA. What is the inductance of the inductor? L= Attempts: 0 of Sersed Using multiple attempts will impact your score. 5% score reduction after attempt 3
The inductance of the inductor connected between the terminals of this generator is 10.77 millihenries (mH).
In an AC circuit, the relationship between voltage, current, frequency, and inductance can be described using the formula V = I * X_L, where V is the voltage, I is the current, and X_L is the inductive reactance.
To find the inductance, we need to rearrange the formula as L = X_L / (2πf), where L represents the inductance and f is the frequency.
Given that the frequency is 6.5 kHz and the current is 65 mA, we first need to convert the current to amperes (A) by dividing it by 1000.
Next, we calculate the inductive reactance (X_L):
X_L = V / I,
X_L = 45 V / (65 mA / 1000) = 692.31 Ω.
Finally, we can find the inductance:
L = X_L / (2πf),
L = 692.31 Ω / (2π * 6500 Hz) ≈ 0.01077 H.
Converting the inductance to millihenries:
0.01077 H * 1000 ≈ 10.77 mH.
Therefore, the inductance of the inductor is approximately 10.77 millihenries (mH)
Learn more about inductance here :
https://brainly.com/question/31127300
#SPJ11
What is the maximum speed at which a car may travel over a humpbacked bridge of radius 15 m without leaving the ground?
The maximum speed at which a car may travel over a humpbacked bridge of radius 15 m without leaving the ground is approximately 12.1 m/s. A humpbacked bridge of radius 15 meters is modeled by a circle.
The car will leave the ground if the normal force exerted by the road on the car becomes zero. At that point, the gravitational force acting on the car will be the only force acting on the car. This means that the car will be in free fall. So, the maximum speed of the car without leaving the ground can be calculated using the formula:
vmax = √rg
where vmax is the maximum speed, r is the radius of the circle, and g is the acceleration due to gravity. We are given r = 15 m. g = 9.81 m/s², since the bridge is on the surface of the Earth.
vmax = √(rg) = √(15*9.81) = √147.15 ≈ 12.1 m/s
To learn more about speed, refer:-
https://brainly.com/question/28224010
#SPJ11
Part C
Now, to get numerical equations for x and y, you’ll need to know the initial values (at time t = 0) for some velocities and accelerations. On the Table below the video:
Select cm as the mass measurement set to display.
Click the Table label and check all x and y displacement and velocity data: x, y, vx, and vy. Then click Close.
Now rewrite the displacement equations from Part A and Part B above by substituting in the x and y velocity values from time t = 0 and also using the theoretical value of acceleration of gravity. Write them out below.
To rewrite the displacement equations from Part A and Part B, we'll substitute in the x and y velocity values from time t = 0 and use the theoretical value of acceleration due to gravity.
Displacement equations for x-axis (horizontal motion):
1. x = (vx)t
where vx is the initial velocity in the x-direction.
Displacement equation for y-axis (vertical motion):
1. y = (vy)t + (1/2)(g)(t^2)
where vy is the initial velocity in the y-direction and g is the acceleration due to gravity.
1. Start by selecting cm as the mass measurement set to display.
2. Click on the Table label and check all x and y displacement and velocity data: x, y, vx, and vy.
3. Click Close to save the changes.
4. Now, let's rewrite the displacement equations using the given values.
- For the x-axis displacement, substitute the initial x-velocity value (vx) at time t = 0 into the equation: x = (vx)t.
- For the y-axis displacement, substitute the initial y-velocity value (vy) at time t = 0 and the acceleration due to gravity (g) into the equation: y = (vy)t + (1/2)[tex](g)(t^2[/tex]).
Please note that the specific values for vx, vy, and g should be provided in the question or the given table. Make sure to substitute the correct values to obtain the numerical equations for x and y displacement.
For more such questions on velocity, click on:
https://brainly.com/question/29396365
#SPJ8
A 1.6 kg sphere of radius R = 68.0 cm rotates about its center of mass in the xy plane. Its angular position as a function of time is given by θ(t) = 7t³ − 9t² + 1
(a) What is its angular velocity at t = 3.00 s ? ω = _______________ rad/s (b) At what time does the angular velocity of the sphere change direction? tb = _______________ s (c) At what time is the sphere in rotational equilibrium? tc = _________________ s
(d) What is the net torque on the sphere at t = 0.643 s? Τz = ________________ N m (e) What is the rotational kinetic energy of the sphere at t = 0.214 s? Krot = __________________ J
(a) The angular velocity of the sphere at t = 3.00 s is 45 rad/s.
(b) The angular velocity of the sphere changes direction at t = 0.857 s
(c) The sphere is in rotational equilibrium at t = 0.43 s.
(d) The net torque on the sphere at t = 0.643 s is 4.45 N m.
(e) The rotational kinetic energy of the sphere at t = 0.214 s is 0.273 J.
Radius of sphere, r = 68.0 cm = 0.68 m
Mass of the sphere, m = 1.6 kg
The angular position of sphere, θ(t) = 7t³ − 9t² + 1
(a)
We can differentiate it to obtain its angular velocity:
ω(t) = dθ/dtω(t) = 21t² - 18t
The angular velocity of the sphere at t = 3.00 s is:
ω(3.00) = 21(3.00)² - 18(3.00)
ω(3.00) = 45 rad/s
Therefore, the angular velocity of the sphere at t = 3.00 s is 45 rad/s.
(b)
The angular velocity of the sphere changes direction when:
ω(t) = 0
Therefore,
21t² - 18t = 0
t(21t - 18) = 0
t = 18/21 = 0.857 s
Thus, the angular velocity of the sphere changes direction at t = 0.857 s.
(c)
The sphere is in rotational equilibrium when its angular acceleration is zero:
α(t) = dω/dt
α(t) = 42t - 18 = 0
Thus, t = 0.43 s.
Hence, the sphere is in rotational equilibrium at t = 0.43 s.
(d)
Net torque on the sphere, Τ = Iα
Here, I is the moment of inertia of the sphere, which is given by:
I = (2/5)mr²
I = (2/5)(1.6)(0.68)²
I = 0.397 J s²/rad
The angular acceleration of the sphere at t = 0.643 s is:
α(t) = 42t - 18
α(0.643) = 42(0.643) - 18
α(0.643) = 11.21 rad/s²
The net torque at t = 0.643 s is:
Τ(t) = Iα
Τ(0.643) = (0.397)(11.21)
Τ(0.643) = 4.45 N m
Therefore, the net torque on the sphere at t = 0.643 s is 4.45 N m.
(e)
The rotational kinetic energy of the sphere, Krot = (1/2)Iω²
The angular velocity of the sphere at t = 0.214 s is:
ω(t) = 21t² - 18t
ω(0.214) = 21(0.214)² - 18(0.214)
ω(0.214) = 1.17 rad/s
The rotational kinetic energy at t = 0.214 s is:
Krot = (1/2)Iω²
Krot = (1/2)(0.397)(1.17)²
Krot = 0.273 J
Therefore, the rotational kinetic energy of the sphere at t = 0.214 s is 0.273 J.
Learn more about the angular velocity:
brainly.com/question/27180056
#SPJ11
Why is it so hard to test collapse theories?
Testing collapse theories, which propose modifications to the standard quantum mechanics to explain the collapse of the wave function, can be challenging due to several reasons:
Experimental Limitations: Collapse theories often make predictions that are very subtle and difficult to observe directly. They may involve phenomena occurring at extremely small scales or with very short timeframes, which are technically challenging to measure and observe in a laboratory setting.
Decoherence and Environment: Collapse theories often propose interactions with the environment or other particles as the cause of wave function collapse. However, the interactions between a quantum system and its environment can lead to decoherence, which makes it difficult to isolate and observe the collapse dynamics.
Interpretational Differences: There are various collapse theories, each with its own set of assumptions and predictions. These theories may have different interpretations of the measurement process and the nature of collapse, making it challenging to design experiments that can distinguish between them and other interpretations of quantum mechanics.
Lack of Consensus: Collapse theories are still a subject of active research and debate in the scientific community. There is no widely accepted collapse theory that has garnered strong experimental support. The lack of consensus makes it challenging to design experiments that can definitively test and validate or rule out specific collapse models.
Philosophical and Conceptual Challenges: The nature of collapse and the measurement process in quantum mechanics pose deep philosophical and conceptual challenges. It is difficult to devise experiments that can directly probe and address these foundational questions.
Due to these complexities and challenges, testing collapse theories remains a topic of ongoing research and investigation in the field of quantum foundations.
To know more about Philosophical and Conceptual Challenges
brainly.com/question/28329967
#SPJ11
A cyclist is riding up a hill having a constant slope of 30° with respect to the home screen speed (in a straight line). Which statement is true? a. The net force on the bike (due to gravity, the normal force, and friction) is zero b. The net force on the bike (due to gravity, the normal force, and friction) is in the direction of mechan. c. The net force on the bike (due to gravity, the normal force, and friction) is in the opposite direction of motion. d. None of these statements are true. b. The truck will not have trened. d. The truck will have travelled farther P2: A 2.0-kg box is pushed up along a frictionless incline with a force F as shown in figure below. HE the magnitude of F is 19.6 N, what is the magnitude of acceleration of the box? Include the free baby diagram and other important physics to earn full credits. a. Zero b. 1.15 m/s2 c.4.6 m/s2 d.5.20 m/s f. none of the above a e.98 m 3 28
Therefore, the magnitude of the acceleration of the box is 0.01 m/s^2.The correct option is none of the above a.
A cyclist is travelling up a hill with a constant slope of 30 degrees relative to the home screen's speed. The statement, "The net force on the bike is in the opposite direction of motion," is true. It is caused by friction, gravity, and the normal force. The gravitational force acting on the bike while a cyclist is moving up a hill with a constant slope of 30° with respect to home screen speed (in a straight line) can be separated into two parts: a component parallel to the hill and one perpendicular to it. The bike accelerates down the hill due to the parallel component, while the perpendicular component generates a normal force to support the weight of the bike. Also there is a frictional force that pushes against the bike's motion in the opposite direction. Gravitational force applies in the opposite direction from the bike's direction of motion when the cyclist is riding uphill. Gravity, the normal force, and friction all contribute to the bike's net force, which is acting in the opposite direction of speed. The right answer is c. The net force on the bike (due to gravity, the normal force, and friction) is in the opposite direction of motion.P2: A 2.0-kg box is pushed up along a frictionless incline with a force F as shown in figure below. The magnitude of F is 19.6 N, what is the magnitude of acceleration of the box?The free body diagram of the 2.0-kg box is as shown below:free body diagram of 2.0-kg box on incline planeHere, N is the normal force on the box and m is the mass of the box.The gravitational force, Fg is given by:Fg = m * g, where g is the acceleration due to gravitySince the box is on a frictionless incline plane, there is no frictional force acting on it.Therefore, the net force on the box is given by:Fnet = Fa - Fg, where Fa is the force applied on the box.The magnitude of the force applied is given as Fa = 19.6 N.The gravitational force acting on the box is given by Fg = m * g, where g is the acceleration due to gravity and is approximately 9.81 m/s^2.The magnitude of the gravitational force acting on the box is Fg = 2.0 kg * 9.81 m/s^2 = 19.62 N.Therefore, the net force acting on the box is:Fnet = Fa - Fg = 19.6 N - 19.62 N = -0.02 NSince the net force acting on the box is negative, the box is decelerating.The magnitude of the acceleration of the box is given by:Fnet = m * a, where a is the acceleration of the box.Therefore, the magnitude of the acceleration of the box is:a = Fnet / m = -0.02 N / 2.0 kg = -0.01 m/s^2. Therefore, the magnitude of the acceleration of the box is 0.01 m/s^2.The correct option is none of the above a.
To know more about motion visit:
https://brainly.com/question/23161252
#SPJ11
Trying to earn a fishy treat, a killer whale at an aquarium excitedly slaps the water 2 times every second. If the waves that are produced travel at 0.9 m/s, what is their wavelength?
The formula for calculating wavelength is;λ = v/fWhere;λ = Wavelengthv = velocityf = frequency Frequency is measured in Hertz (Hz), while wavelength is measured in meters (m).
The frequency of the wave that is produced by the killer whale is 2 times per second. It implies that the time interval between each wave produced is 1/2 seconds.The wave velocity is 0.9 m/s.
Therefore;Wavelength = velocity / frequencyWhere;Frequency = 2 times/secondWavelength = 0.9 / 2Wavelength = 0.45 mThe wavelength of the waves produced by the killer whale is 0.45 meters.Explanation:In simple terms, frequency is the number of waves produced in one second.
On the other hand, wavelength is the distance between two corresponding points on the wave; for example, from peak to peak or from trough to trough. Wavelength is calculated by dividing the velocity of a wave by its frequency.
The formula for calculating wavelength is;λ = v/fWhere;λ = Wavelengthv = velocityf = frequencyFrequency is measured in Hertz (Hz), while wavelength is measured in meters (m).
to know more about Frequency
https://brainly.com/question/254161
#SPJ11
A 79 kg man is pushing a 31 kg shopping trolley. The man and the shopping trolley move forward together with a maximum forward force of 225 N. Assuming friction is zero, what is the magnitude of the force (in N) of the man on the shopping trolley?
Hint: It may be easier to work out the acceleration first.
Hint: Enter only the numerical part of your answer to the nearest integer.
The magnitude of the force (in N) of the man on the shopping trolley is 64 N.
The magnitude of the force (in N) of the man on the shopping trolley is 172 N.Let's calculate the acceleration of the man and the shopping trolley using the formula below:F = maWhere F is the force, m is the mass, and a is the acceleration.The total mass is equal to the sum of the man's mass and the shopping trolley's mass. So, the total mass is 79 kg + 31 kg = 110 kg.The maximum forward force is given as 225 N. Therefore,225 N = 110 kg x aSolving for a gives,a = 2.0455 m/s².
Now, let's calculate the force (in N) of the man on the shopping trolley. Using Newton's second law of motion,F = maWhere F is the force, m is the mass, and a is the acceleration.Substituting the values we have, we get:F = 31 kg x 2.0455 m/s²F = 63.5 NTherefore, the magnitude of the force (in N) of the man on the shopping trolley is:F + 79 kg x 2.0455 m/s² = F + 161.44 N (By Newton's Second Law)F = 225 N - 161.44 NF = 63.56 N ≈ 64 N.Rounding it off to the nearest integer, the magnitude of the force (in N) of the man on the shopping trolley is 64 N.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
A mixture of 0.750 kg of ice and 0.250 kg of water are in an equilibrium state at 0° C. Some ice
melts such that the mass of ice and water are evenly distributed with 0.5 kg each and the system
remains at 0° C. What is the change in entropy of the mixture?
The heat of fusion of water is 333 kJ/kg.
The change in entropy of the mixture is approximately 0.305 kJ/K. Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive labour.
To find the change in entropy of the mixture, we need to consider the entropy change during the phase transition of the ice melting.
The heat of fusion, denoted as ΔH_fus, is the amount of heat required to change 1 kg of a substance from solid to liquid at its melting point. In this case, the heat of fusion of water is given as 333 kJ/kg.
First, let's calculate the amount of heat required to melt the ice:
Q = m * ΔH_fus
Where:
Q is the heat absorbed (or released) during the phase transition,
m is the mass of the ice that melted.
Given that the mass of the ice that melted is 0.250 kg, we can calculate:
Q = 0.250 kg * 333 kJ/kg = 83.25 kJ
Since the ice and water are in an equilibrium state at 0°C, the entire system remains at the melting point temperature. Therefore, there is no change in temperature, and we can assume that the heat absorbed by the ice is equal to the heat released by the water. Thus, the total change in entropy of the mixture can be calculated using the formula:
ΔS = Q / T
Where:
ΔS is the change in entropy,
Q is the heat absorbed or released,
T is the temperature in Kelvin.
The temperature remains constant at 0°C, which is 273.15 K. Plugging in the values:
ΔS = 83.25 kJ / 273.15 K ≈ 0.305 kJ/K
To know more about entropy
https://brainly.com/question/32167470
#SPJ11
For the gray shaded area in the figure, 1) find the magnetic force acting on the sheet due to the application of magnetic field of B
=B 0
y
^
and the surface current density flowing in the sheet is given as K
=cy x
^
. 2) Find the units of the constant c in the relation K
=cy x
^
. 3) Show that the force found in part 1 has the units of N. 4) Considering a rotation axis is passing thorough the sheet at 2a and parallel to the x axis. Predicts the motion of the sheet.
Given figure: Gray shaded area in the figure Magnetic force acting on the sheet.
The force acting on the sheet can be found by using the following formula:F = K x B Where F is the magnetic force K is the surface current density B is the magnetic field. By substituting the given values into the formula we get:F = K x B= c * y x x B= c * B * y x x---------- (1)Now, we have to find the units of constant c.
The units of constant c can be found by using the units of F, K, and B.SI unit of force is N (Newton)SI unit of surface current density is A/m²SI unit of magnetic field is T (Tesla)Therefore, the units of constant c are N/T. ---------- (2)Now we have to show that the force found in part 1 has the units of Newtons.By substituting the value of K from equation (1) into the equation F = K x B, we get:F = c * B * y x xNow, the units of force can be written as[N] = [N/T] x [T] x [m]Therefore, the force found in part 1 has the units of Newtons. ---------- (3)
Finally, considering a rotation axis passing through the sheet at 2a and parallel to the x-axis. Predict the motion of the sheet.As the sheet is symmetric about the x-axis, therefore, the torque acting on the sheet due to the magnetic force F will be zero. Therefore, the sheet will experience only a translational force in the negative y direction. As a result, the sheet will move in the negative y direction.
Learn more on density here:
brainly.in/question/48271788
#SPJ11
For the unity feedback system shown in Figure P7.1, where G(s) = 450(s+8)(s+12)(s +15) s(s+38)(s² +2s+28) find the steady-state errors for the following test inputs: 25u(t), 37tu(t), 471²u(t). [Section: 7.2] R(s) + E(s) G(s) FIGURE P7.1 C(s)
The steady-state error for the test input 471^2u(t) is 471^2.
To find the steady-state errors for the given unity feedback system, we can use the final value theorem. The steady-state error is given by the formula:
E_ss = lim_(s->0) s * R(s) * G(s) / (1 + G(s) * C(s))
Given that G(s) = 450(s+8)(s+12)(s+15) / [s(s+38)(s^2+2s+28)] and C(s) = 1, we can substitute these values into the steady-state error formula and calculate the steady-state errors for the given test inputs.
For the test input 25u(t):
R(s) = 25/s
E_ss = lim_(s->0) s * (25/s) * G(s) / (1 + G(s) * 1)
= lim_(s->0) 25 * G(s) / (s + G(s))
To find the limit as s approaches 0, we substitute s = 0 into the expression:
E_ss = 25 * G(0) / (0 + G(0))
Evaluating G(0):
G(0) = 450(0+8)(0+12)(0+15) / [0(0+38)(0^2+2*0+28)]
= 450 * 8 * 12 * 15 / (38 * 28)
= 7200
Substituting G(0) back into the expression:
E_ss = 25 * 7200 / (0 + 7200)
= 25
Therefore, the steady-state error for the test input 25u(t) is 25.
For the test input 37tu(t):
R(s) = 37/s^2
E_ss = lim_(s->0) s * (37/s^2) * G(s) / (1 + G(s) * 1)
= lim_(s->0) 37 * G(s) / (s^2 + G(s))
Evaluating G(0):
G(0) = 7200
Substituting G(0) back into the expression:
E_ss = 37 * 7200 / (0^2 + 7200)
= 37
Therefore, the steady-state error for the test input 37tu(t) is 37.
For the test input 471^2u(t):
R(s) = 471^2/s^3
E_ss = lim_(s->0) s * (471^2/s^3) * G(s) / (1 + G(s) * 1)
= lim_(s->0) 471^2 * G(s) / (s^3 + G(s))
Evaluating G(0):
G(0) = 7200
Substituting G(0) back into the expression:
E_ss = 471^2 * 7200 / (0^3 + 7200)
= 471^2
Therefore, the steady-state error for the test input 471^2u(t) is 471^2.
Learn more about steady-state error at: https://brainly.com/question/15831208
#SPJ11
A 3.9-m-diameter merry-go-round is rotating freely with an angular velocity of 0.70 rad/s. Its total moment of inertia is 1320 kg.m. Four people standing on the ground, each of mass 70 kg suddenly step onto the edge of the merry-go-round. What is the angular velocity of the merry-go-round now? What if the people were on it initially and then jumped off in a radial direction (relative to the merry-go-round)?
The angular velocity of the merry-go-round after the people jump off in a radial direction relative to the merry-go-round is approximately 3.67 rad/s.
To solve this problem, we can use the principle of conservation of angular momentum. The initial angular momentum of the merry-go-round is equal to the final angular momentum after the people step onto it.
Let's calculate the initial angular momentum of the merry-go-round. The moment of inertia of a rotating object can be calculated using the formula:
I = m * r²
where I is the moment of inertia, m is the mass of the object, and r is the radius of rotation.
Given that the total moment of inertia of the merry-go-round is 1320 kg.m, we can find the initial moment of inertia:
1320 kg.m = m_merry-go-round * r²
where m_merry-go-round is the mass of the merry-go-round. Since we only have the diameter (3.9 m) and not the mass, we cannot directly calculate it. However, we don't need the actual value of m_merry-go-round to solve the problem.
Next, let's calculate the initial angular momentum of the merry-go-round using the formula:
L_initial = I_initial * ω_initial
where L_initial is the initial angular momentum, I_initial is the initial moment of inertia, and ω_initial is the initial angular velocity.
Now, when the four people step onto the merry-go-round, their angular momentum will contribute to the total angular momentum of the system. The mass of the four people is 70 kg each, so the total mass added to the system is:
m_people = 4 * 70 kg = 280 kg
The radius of rotation remains the same, which is half the diameter of the merry-go-round:
r = 3.9 m / 2 = 1.95 m
Now, let's calculate the final moment of inertia of the system, considering the added mass of the people:
I_final = I_initial + m_people * r²
Finally, we can calculate the final angular velocity using the conservation of angular momentum:
L_initial = L_final
I_initial * ω_initial = I_final * ω_final
Solving for ω_final:
ω_final = (I_initial * ω_initial) / I_final
Now, let's calculate the values:
I_initial = 1320 kg.m (given)
ω_initial = 0.70 rad/s (given)
m_people = 280 kg
r = 1.95 m
I_final = I_initial + m_people * r²
I_final = 1320 kg.m + 280 kg * (1.95 m)²
ω_final = (I_initial * ω_initial) / I_final
Calculate I_final:
I_final = 1320 kg.m + 280 kg * (1.95 m)²
I_final = 1320 kg.m + 280 kg * 3.8025 m²
I_final = 1320 kg.m + 1069.7 kg.m
I_final = 2389.7 kg.m
Calculate ω_final:
ω_final = (1320 kg.m * 0.70 rad/s) / 2389.7 kg.m
ω_final = 924 rad/(s * kg)
Therefore, the angular velocity of the merry-go-round after the people step onto it is approximately 924 rad/(s * kg).
Now, let's consider the scenario where the people were initially on the merry-go-round and then jumped off in a radial direction relative to the merry-go-round.
When the people jump off in a radial direction, the system loses mass. The final moment of inertia will be different from the initial moment of inertia because the mass of the people is no longer contributing to the rotation. The angular momentum will be conserved again.
In this case, the final moment of inertia will be the initial moment of inertia minus the mass of the people:
I_final_jump = I_initial - m_people * r²
And the final angular velocity can be calculated in the same way:
ω_final_jump = (I_initial * ω_initial) / I_final_jump
Let's calculate the values:
I_final_jump = I_initial - m_people * r²
I_final_jump = 1320 kg.m - 280 kg * (1.95 m)²
ω_final_jump = (1320 kg.m * 0.70 rad/s) / I_final_jump
Calculate I_final_jump:
I_final_jump = 1320 kg.m - 280 kg * (1.95 m)²
I_final_jump = 1320 kg.m - 280 kg * 3.8025 m²
I_final_jump = 1320 kg.m - 1069.7 kg.m
I_final_jump = 250.3 kg.m
Calculate ω_final_jump:
ω_final_jump = (1320 kg.m * 0.70 rad/s) / 250.3 kg.m
ω_final_jump = 3.67 rad/s
Therefore, the angular velocity of the merry-go-round after the people jump off in a radial direction relative to the merry-go-round is approximately 3.67 rad/s.
To learn more about angular velocity visit:
brainly.com/question/30237820
#SPJ11
A magnetic field propagating in free space is described by the equation: H (z, t) 20 sin (π x 108 t + ßz) ar A/m 1) Find β, λ, and the frequency f (30 ports) 2) Find the electric field E (z, t) using Maxwell's equations (40 points) 3) Using the given H and the E found above, calculate the vector product P EXH as function of z and t. This vector, aka the Poynting Vector, points into the direction the wave is propagating. Which is this direction? (20 points) 4) Using the expression of P that you found, which measures the instantaneous power transmitted per square meter, find the average value of this power.
A magnetic field propagating in free space is described by the equation: H (z, t) 20 sin (π x 108 t + ßz) ar A/m 1). The average value of power transmitted per square meter is 0.282 W/m².
4. Calculating the average value of power transmitted per square meter The instantaneous power transmitted per square meter, or Intensity, is given byI = |P|² / (2 * η) where |P| = (1/µ0) × 20 sin (π x 108 t + ßz)η = Impedance of free space = 377 ΩTherefore,I = |P|² / (2 * η) = (20² sin² (π x 108 t + ßz)) / (2 * 377)Average power is given by, Pavg = (1/T) ∫₀ᵀ I(t) dt= (1/T) ∫₀ᵀ [(20² sin² (π x 108 t + ßz)) / (2 * 377)] dt where T = Time period = 1/f = 1/54Therefore, substituting the given values Pavg = (1/T) ∫₀ᵀ [(20² sin² (π x 108 t + ßz)) / (2 * 377)] dt = (20² / 4 * 377 * T) = 0.282 W/m². Therefore, the average value of power transmitted per square meter is 0.282 W/m².
To know more about magnetic field click here:
https://brainly.com/question/14848188
#SPJ11
An electron travels at a speed of 2.0×107 ms in a plane perpendicular to a magnetic field of 0.010 T. Determine the path of its orbit, the period, and the frequency of rotation.
The path of the electron's orbit is a circle with a radius of approximately 0.715 meters. The period of rotation is approximately [tex]2.25 * 10^-^7[/tex]seconds, and the frequency of rotation is approximately [tex]4.44 * 10^6 Hz[/tex].
When an electron moves perpendicular to a magnetic field, it experiences a magnetic force that acts as the centripetal force, keeping the electron in a circular path. The centripetal force can be equated to the magnetic force:
[tex]mv^2/r = qvB[/tex]
Where m is the mass of the electron, v is its velocity, r is the radius of the orbit, q is the charge of the electron, and B is the magnetic field strength.
We can rearrange the equation to solve for the radius of the orbit:
r = mv/(qB)
Substituting the given values, we have:
[tex]r = (9.11 * 10^{-31} kg)(2.0 * 10^7 ms)/((1.6 * 10^-{19} C)(0.010 T))[/tex]
Calculating this, we find the radius of the orbit to be approximately 0.715 meters.
To determine the period, we use the equation:
T = 2πr/v
Substituting the values:
[tex]T = 2\pi(0.715 m)/(2.0 * 10^7 ms)[/tex]
Calculating this, we find the period to be approximately [tex]2.25 * 10^-^7[/tex]seconds.
The frequency of rotation can be found using the equation:
f = 1/T
Substituting the period value, we get:
[tex]f = 1/(2.25 * 10^-^7 s)[/tex]
Calculating this, we find the frequency of rotation to be approximately [tex]4.44 * 10^6 Hz[/tex].
Learn more centripetal force here:
https://brainly.com/question/14021112
#SPJ11
Which of the following is correct in AC circuits? For a given peak voltage, the peak current is inversely proportional to capacitance, inversely proportional to inductance, and directly proportional to resistance. For a given peak voltage, the peak current is directly proportional to resistance, directly proportional to capacitance, and inversely proportional to inductance. For a given peak voltage, the peak current is inversely proportional to resistance, inversely proportional to capacitance, and inversely proportional to inductance. For a given peak voltage, the peak current is directly proportional to capacitance, inversely proportional to inductance, and inversely proportional to resistance.
For a given peak voltage, the peak current in an AC circuit is directly proportional to resistance, inversely proportional to capacitance, and inversely proportional to inductance.
In an AC circuit, the relationship between peak voltage (Vp), peak current (Ip), resistance (R), capacitance (C), and inductance (L) can be described using Ohm's Law and the formulas for capacitive reactance (Xc) and inductive reactance (Xl).
Ohm's Law states that Vp = Ip * R, where Vp is the peak voltage and R is the resistance. According to Ohm's Law, the peak current is directly proportional to resistance. Therefore, for a given peak voltage, the peak current is directly proportional to resistance.
In a capacitive circuit, the capacitive reactance (Xc) is given by Xc = 1 / (2πfC), where f is the frequency of the AC signal and C is the capacitance. The higher the capacitance, the lower the capacitive reactance. Therefore, for a given peak voltage, the peak current is inversely proportional to capacitance.
In an inductive circuit, the inductive reactance (Xl) is given by Xl = 2πfL, where L is the inductance. The higher the inductance, the higher the inductive reactance. Therefore, for a given peak voltage, the peak current is inversely proportional to inductance.
Thus, the correct statement is: For a given peak voltage, the peak current is directly proportional to resistance, inversely proportional to capacitance, and inversely proportional to inductance.
Learn more about Ohm's Law here:
https://brainly.com/question/1247379
#SPJ11
Reverberation time is the time taken by reflected sound to decay by 60 dB from the original sound level. Discuss why direct sound could not be heard in a live room.
Reasons why direct sound could not be heard in a live room are Reverberation, Reflections, and Distortion.
Reverberation time is the time taken by reflected sound to decay by 60 dB from the original sound level. Direct sound could not be heard in a live room due to the following reasons:
Reasons why direct sound could not be heard in a live room are as follows:
1. Reverberation: The direct sound is quickly absorbed by the listener or reflected off the walls in an uncontrolled fashion in a small, untreated room. The time difference between the direct sound and the first reverberation makes it difficult to hear the direct sound. Reverberation, in general, masks the direct sound. This makes it difficult to hear the direct sound as it is drowned out by the reverberant sound.
2. Reflections: The sound can be reflected in many directions by walls, floors, and ceilings. This creates multiple reflections of sound in a room, which causes a 'comb-filtering' effect. This can cause dips or peaks in the frequency response of the room. This makes the sound in a live room sound hollow and unnatural.
3. Distortion: The direct sound can be distorted when it reaches the listener in a live room due to reflections and other factors. This distortion can cause the sound to be harsh, harsh, and brittle. This makes it difficult to listen to music in a live room.
Learn more about sound here:
https://brainly.com/question/32257037
#SPJ11
A 3.0 kg puck slides on frictionless surface at 0.40 m/s and strikes a 4.0 kg puck at rest. The first puck moves off at 0.30 m/s at an angle +35 degrees from the incident direction. What is the velocity of the 4.0 kg puck after the impact?
After the impact, the 4.0 kg puck acquires a velocity of approximately 0.75 m/s in the opposite direction of the incident puck's original motion.
To solve this problem, we can apply the law of conservation of momentum, which states that the total momentum before the collision is equal to the total momentum after the collision. The momentum of an object is calculated by multiplying its mass by its velocity.
Before the collision, the total momentum is given by:
Initial momentum = (mass of first puck * velocity of first puck) + (mass of second puck * velocity of second puck)
= (3.0 kg * 0.40 m/s) + (4.0 kg * 0 m/s) [since the second puck is initially at rest]
= 1.2 kg m/s
After the collision, the total momentum is given by:
Final momentum = (mass of first puck * velocity of first puck after collision) + (mass of second puck * velocity of second puck after collision)
= (3.0 kg * 0.30 m/s * cos(35 degrees)) + (4.0 kg * velocity of second puck after collision)
Since the first puck moves off at an angle, we need to use the cosine of the angle to calculate the horizontal component of its velocity.
Solving the equation, we find that the velocity of the 4.0 kg puck after the impact is approximately 0.75 m/s.
Learn more about motion here:
https://brainly.com/question/12640444
#SPJ11