The mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g. when the mole fraction of methanol is 0.100.
The mass of each component in a 55.0-g aqueous solution of methanol, CH4O, can be found by using the mole fraction of methanol (0.100).
First, calculate the total number of moles of the solution:
55.0 g x (1 mol/32.04 g) = 1.72 moles
Then, calculate the number of moles of methanol:
1.72 moles x (0.100 mole fraction) = 0.172 moles
Finally, calculate the mass of each component:
Methanol mass: 0.172 moles x (32.04 g/mol) = 5.53 g
Water mass: 1.72 moles - 0.172 moles = 1.55 moles x (18.02 g/mol) = 27.91 g
Therefore, the mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g.
For more such questions on mass , Visit:
https://brainly.com/question/1838164
#SPJ11
n the combustion analysis of 0.1127 g of glucose (c6 h12 o6 ), what mass, in grams, of co2 would be produced?
Answer: The combustion analysis of 0.1127 g of glucose (C6H12O6) yields 0.3283 g of CO2.
The equation for the combustion of glucose is:
C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(g)
When glucose is combusted, the number of CO2 and H2O molecules is equal. Here, 1 mole of CO2 is produced for every mole of glucose that is burned.
Thus, the mass of CO2 produced can be calculated using the formula:
mass of CO2 produced = moles of CO2 produced x molar mass of CO2
The first step is to determine the number of moles of glucose that was burned. The molecular weight of glucose is:
Molecular weight of glucose = (6 x 12.01 g/mol) + (12 x 1.01 g/mol) + (6 x 16.00 g/mol)
= 180.18 g/mol
Next, we need to calculate the number of moles of glucose in the 0.1127 g of glucose given:
n = m/Mw = 0.1127 g / 180.18 g/mol
= 0.000625 mol
Now that we know the number of moles of glucose that was burned, we can calculate the number of moles of CO2 produced.
Since 1 mole of glucose produces 6 moles of CO2, the number of moles of CO2 produced is:
= 0.000625 mol x 6
= 0.00375 mol
Finally, we can use the molar mass of CO2 to calculate the mass of CO2 produced:
= 0.00375 mol x 44.01 g/mol
= 0.1659 g ≈ 0.3013 g
Therefore, the mass of CO2 produced in the combustion of 0.1127 g of glucose is approximately 0.3013 g.
What is a combustion analysis?
The combustion analysis is a method used to determine the empirical formula of organic compounds. The sample is burned in the presence of excess oxygen to form carbon dioxide and water.
The masses of these products are measured and used to calculate the empirical formula of the compound.
Learn more about combustion analysis here:
https://brainly.com/question/28547293#
#SPJ11
what is necessary for extraction? group of answer choices two phases in which the solute is equally soluble higher solute solubility in the second phase lower solute solubility in the second phase two phases in which the solute is equally insoluble
For extraction, there should be an option c) lower solute solubility in the second phase.
Extraction is a process in which a solute is separated from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.
In the first phase, the solute has higher solubility, meaning it dissolves more readily.
In the second phase, the solute has lower solubility, meaning it is less likely to dissolve.
In order for extraction to be successful, the solute must be differently soluble in the phases. This ensures that the solute is separated efficiently and effectively.
The process of extraction involves the formation of two liquid phases and the transfer of the solute from one phase to the other. The solute is transferred from the first phase to the second phase, where it is separated from the solution.
To summarize, extraction is a process of separating a solute from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.
Therefore, for extraction, it is necessary for the solute to have a lower solubility in the second phase. and hence the correct answer is option c.
To know more about extraction, refer here:
https://brainly.com/question/12910778#
#SPJ11
an atomic transition produces a photon with a wavelength of 410 nm. what is the energy of this photon in ev?
The energy of a photon with a wavelength of 410 nm is equal to 3.03 eV.
To calculate this, you can use the formula E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Plugging in the values, you get E = (6.626x10⁻³⁴J·s)(3.0x10⁸m/s)/(410x10⁻⁹m) = 4.839 × 10-19 J = 3.03 eV.
An atomic transition produces a photon with a wavelength of 410 nm. The energy of this photon is 3.03 eV.
The following formula can be used to calculate the energy of a photon.
Energy = Planck's constant x (speed of light/wavelength).
Here, Planck's constant is (h) = 6.626 × 10⁻³⁴ J s. The speed of light is (c) = 3 × 10⁸m/s (in a vacuum). The wavelength of the photon is (λ) = 410 nm.
So, let's first convert the wavelength to meters (1 nm =10⁻⁹ m).
So, 410 nm = 410 × 10⁻⁹ m = 4.10 × [tex]10^{-7}[/tex]m. Now, we can calculate the energy of the photon using the formula.
Energy = h x (c/λ)
Energy = 6.626 × 10⁻³⁴ J s x (3 × 10⁸ m/s / 4.10 × [tex]10^{-7}[/tex] m)
Energy = 4.839 × [tex]10^{-19}[/tex] J (joules)
One electron volt is equal to 1.6 × [tex]10^{-19}[/tex]J.
So, we can convert the energy from joules to electron volts.
Energy (in eV) = Energy (in J) / (1.6 × [tex]10^{-19}[/tex]J/eV)
Energy (in eV) = 4.839 × [tex]10^{-19}[/tex]J / (1.6 × [tex]10^{-19}[/tex]J/eV)
Energy (in eV) = 3.03 eV
Therefore, the energy of the photon is 3.03 eV.
For more questions related to Planck's constant.
https://brainly.com/question/2289138
#SPJ11
3Ba3(PO4)2 a. What purpose do the parentheses service b. What does the subscript 4 indicate c.What does the subscript 2 indicate d.what does the coefficient indicate
a. The parentheses indicate that the elements within are grouped together, i.e., they are part of the same unit.
Tribarium Phosphate,Tribarium is the chemical symbol for Barium and the name reflects the fact that it is composed of three atoms of Barium and two atoms of Phosphate.It is an inorganic salt that is insoluble in water and has a variety of uses in industrial and medical applications.
b. The subscript 4 indicates that there are four [tex]PO_4\ molecules[/tex] in the compound.
c.The subscript 2 implies that there are two [tex]Ba_3[/tex] molecules in the compound.
d. The coefficient indicates the number of molecules of each element in the compound. In this case, there is one [tex]Ba_3[/tex] molecule, four [tex]PO_4[/tex] molecules, and three Ca molecules.
learn more about Phosphate Refer:brainly.com/question/30500750
#SPJ1
How many atoms does O have
Answer:
8 atoms it have but u don't know
what term is used to describe the electrons in the outermost energy level
The term is used to describe the electrons present in the outermost energy level is the valence electrons.
The number of the electrons in the outermost shell of the particular atom that determines its reactivity, or the tendency to form the chemical bonds with the other atoms. This is the outermost shell and is known as valence shell, and the electrons present in it are called the valence electrons.
The electrons are on the outermost energy level of the atom are called the valence electrons. These are the electrons that involved in the bonding and the chemical reactions. The other electrons are the core electrons.
To learn more about electrons here
https://brainly.com/question/31179419
#SPJ4
How many atoms are in 32.10 g of He
Taking into account the definition of Avogadro's Number, 4.83×10²⁴ atoms of He are in 32.10 g of He.
Definition of molar massThe molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.
Definition of Avogadro's NumberAvogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole.
Its value is 6.023×10²³ particles per mole.
Amount of moles of 32.10 g of HeThe molar mass of He is 4 g/mole. You can apply the following rule of three: If by definition of molar mass 4 grams of He are contained in 1 mole of He, 32.10 grams of He are contained in how many moles?
moles= (32.10 grams × 1 mole)÷ 4 grams
moles= 8.025 moles
The amount of moles of He in 32.19 grams is 8.025 moles.
Amount of atoms of 32.10 g of HeYou can apply the following rule of three: If by definition of Avogadro's Number 1 mole of He contains 6.023×10²³ atoms, 8.025 moles of He contains how many atoms?
amount of atoms of He= (8.025 moles × 6.023×10²³ atoms)÷ 1 mole
amount of atoms of He= 4.83×10²⁴ atoms
Finally, 4.83×10²⁴ atoms of He are present.
Learn more about Avogadro's Number:
brainly.com/question/11907018
#SPJ1
I need help with this image below will be much appreciated
H2O + CO2 = CO2 Plus H2O + CH4. As there are 4 moles of both oxygen and hydrogen here on side that reacts but three and two moles, respectively, the preceding equation also isn't balanced.
What are the ingredients in the reaction CH4 2O2 CO2 2H2O?Response and justification CO2 and H2O are the end results of the chemical process. Methane combustion is depicted in the chemical equation. A chemical equation's arrow, which points to a product side, indicates the reaction's direction (shows the products).
What is the outcome of the reaction?Products are the organisms that emerge from chemical processes. In a chemical reaction, reactants go through a highly energy transition stage before becoming products. This reaction results in the consumption of the reactants.
To know more about moles visit:
https://brainly.com/question/26416088
#SPJ1
discuss the concentrations of reactants and products in the equilibrium in the two sketches and explain why the reactants are predominant species at the equilibrium in your graphs even though the equilibrium constant is larger than 1.
This indicates that the equilibrium state of the reaction—also referred to as an unfavourable equilibrium—favors the reactants.
The reaction mechanism might be one explanation for this. Reactants may build up before the equilibrium state is reached if the reaction has a slow step. The reaction's stoichiometry, in which the ratio of products to reactants is not ideal for product formation, may also be a factor.
Reactant concentrations can be lowered or product concentrations can be raised to tip the equilibrium in favor of product formation. Altering the reaction conditions, such as temperature or pressure, can also encourage the formation of the desired product.
Overall, a number of variables, such as the reaction mechanism, stoichiometry, and reaction conditions, affect the concentrations of reactants and products at equilibrium.
Learn more about equilibrium state
brainly.com/question/12084217
#SPJ4
Enter your answer in the provided box. Atomic hydrogen produces a well-known series of spectral lines in several regions of the electromagnetic spectrum. Each series fits the Rydberg equation with its own particular nį value. Calculate the value of n, that would produce a series of lines in which the highest energy line has a wavelength of 821 nm.
n1 = ___
To calculate the value of n, we need to use the Rydberg equation: 1/λ = R(1/n1^2 - 1/n2^2). In this equation, λ is the wavelength of the highest energy line (821 nm) and R is the Rydberg constant (1.097x10^7 m^-1). Solving the equation for n1 yields a value of n1 = 3.863.
This value of n1 indicates that the highest energy line of atomic hydrogen will have a wavelength of 821 nm. This is because the Rydberg equation is used to calculate the wavelength of spectral lines in an emission spectrum, with higher values of n producing shorter wavelengths and lower values of n producing longer wavelengths. Therefore, a value of n1 = 3.863 will produce a series of lines with a highest energy line of 821 nm.
Know more about Rydberg equation here
https://brainly.com/question/28304174#
#SPJ11
Select all that apply
Identify the cranial nerves associated with gastrointestinal tract motor output. Select all that apply.
vagus
trochlear
hypoglossal
facial
olfactory
glossopharyngeal
The cranial nerves associated with gastrointestinal tract motor output are vagus nerve, glossopharyngeal nerve, and facial nerve. The correct options are option A, D, and F.
Cranial nerves are the nerves that emanate directly from the brain. There are 12 pairs of cranial nerves. These nerves are responsible for transmitting sensory information such as vision, hearing, and touch as well as motor signals like movement and coordination to different parts of the body.
The cranial nerves that are responsible for gastrointestinal tract motor output are Vagus, Glossopharyngeal, and Facial.
The vagus nerve is the 10th cranial nerve and is one of the most critical nerves for gut activity. This nerve is a major parasympathetic supply to the upper GI tract, including the stomach and small intestine.
It has both motor and sensory fibers. The parasympathetic component of the vagus nerve promotes the release of acetylcholine, which stimulates the GI muscles to contract and propel food through the digestive tract.
The vagus nerve may also control some metabolic activities, including insulin release and glucose metabolism.
The glossopharyngeal nerve is the 9th cranial nerve and plays an essential role in controlling the muscles of the pharynx and throat. This nerve's motor component is responsible for activating the pharynx and upper esophageal sphincter when swallowing, which helps in propelling food through the GI tract.
The facial nerve is the 7th cranial nerve and plays a crucial role in controlling the muscles of facial expression. It also has a sensory component, which is responsible for taste perception in the anterior two-thirds of the tongue.
Additionally, it supplies parasympathetic fibers to the salivary and lacrimal glands, which are responsible for secreting enzymes and fluids that help in digestion.
To know more about vagus nerve, refer here:
https://brainly.com/question/30175573#
#SPJ11
a solution of glucose in water has a concentration of 0.750 m. how many moles of solute are present in a volume of 352 ml?
The number of moles of solute is 0.264 moles.
The concentration of a solution can be determined by calculating the number of moles of solute present in a given volume. The concentration of a glucose solution given is 0.750 m, which means that there are 0.750 moles of glucose present in 1 liter of the solution.
To calculate the number of moles of solute present in 352 ml of this solution, we must first convert 352 ml to liters. This is done by dividing 352 by 1000, giving 0.352 liters.
To calculate the number of moles of glucose in this volume of solution, we must multiply 0.750 moles by 0.352 liters, giving 0.264 moles.
This means that in a volume of 352 ml of a solution with a concentration of 0.750 m, there are 0.264 moles of glucose present.
Therefore, the number of moles of solute present in a volume of 352 ml of glucose solution is 0.264 moles.
To know more about moles, refer here:
https://brainly.com/question/26416088#
#SPJ11
If 11. 5 grams of chlorine reacts with aluminum,how many grams of aluminum chloride will be formed according to the following reaction 2al+3cl2=2alcl3
When 11.5 grams of chlorine reacts with aluminum, 14.42 grams of aluminum chloride will be formed.
According to the balanced chemical equation:
[tex]2 Al + 3 Cl_{2}[/tex] → [tex]2 AlCl_{3}[/tex]
As can be seen, two moles of aluminum chloride are produced by the interaction of two moles of aluminum and three moles of chlorine. This shows that the aluminum: chlorine mole ratio in the process is 2:3.
To find how much aluminum chloride is created when 11.5 grams of chlorine react with aluminum, we must first calculate the amount of chlorine in moles:
11.5 g [tex]Cl_{2}[/tex] / 70.9 g/mol [tex]Cl_{2}[/tex]= 0.162 mol [tex]Cl_{2}[/tex]
Since the mole ratio of aluminum to chlorine is 2:3, we know that the amount of aluminum consumed in the reaction is:
0.162 mol [tex]Cl_{2}[/tex] x (2 mol Al / 3 mol [tex]Cl_{2}[/tex]) = 0.108 mol Al
Finally, we can use the molar mass of aluminum chloride (133.34 g/mol) to calculate the mass of aluminum chloride formed:
0.108 mol AlCl3 x 133.34 g/mol [tex]AlCl_{3}[/tex]= 14.42 g [tex]2 AlCl_{3}[/tex]
Therefore, when 11.5 grams of chlorine reacts with aluminum, 14.42 grams of aluminum chloride will be formed.
Learn more about aluminum chloride
https://brainly.com/question/29446640
#SPJ4
For another researcher's data the starting mass of apparatus + solid was 113.249 g. After the reaction was complete the apparatus was reweighed. The resulting mass was 113.276 g. Which of the following could have caused the mass gain?
Select all that apply
Group of answer choices
The apparatus had a gas leak and room air could enter the apparatus.
The apparatus picked up extra water droplets between weighings
They forgot to weigh the mass of the gas-generating solid before the reaction.
Matter was created in the reaction.
The mass gain that happened after the reaction could have been caused due to the matter was created in the reaction .
What is mass gain?
In physics, mass gain refers to an increase in mass in a chemical or nuclear reaction. It is the difference between the mass of the reactants and the mass of the products after a chemical reaction has occurred.
What happened in the given problem?
According to the given problem, the starting mass of the apparatus and solid was 113.249 g. After the reaction was complete, the apparatus was reweighed. The resulting mass was 113.276 g. The problem asks which of the following could have caused the mass gain.
The mass gain could have been caused by the following:
They forgot to weigh the mass of the gas-generating solid before the reaction
The apparatus picked up extra water droplets between weighing's.
Matter was created in the reaction.
The apparatus picked up extra water droplets between weighings, but they forgot to weigh the mass of the gas-generating solid before the reaction, and matter was created in the reaction.
To know more about the mass https://brainly.com/question/19694949
#SPJ11
suppose that the actual amount of nickel is less than your experimentally determined amount of nickel. what is the likely source(s) of this error and how can it be reduced?
When the actual amount of nickel is less than the experimentally determined amount of nickel, there are a few likely sources of error include measurement error, sampling error, dilution error, reaction error, and air oxidation.
The likely sources of error include:Measurement error: You might have taken the incorrect measurement on the balance or used a balance that was not calibrated correctly.Sampling error: You might not have taken a sufficient sample size or had a sample that was not representative of the whole population.Dilution error: If you dilute the sample too much, you might not have been able to detect the nickel content.Reaction error: If the reaction is incomplete or goes in the wrong direction, the quantity of nickel calculated would be inaccurate.Air Oxidation: This is the most common cause of the problem because nickel is quickly oxidized when exposed to air. A nickel-containing compound can turn brown as a result of this.The error can be decreased in the following ways:
Measurements should be performed carefully and accurately.Sufficient sample size should be taken.Ensure proper dilution techniques and methods of analysisEnsure that reactions are complete. Keep the sample from being exposed to air as much as possible.A sample's weight should be measured as soon as possible after it is transferred to the weighboat.So, The likely sources of error include measurement error, sampling error, dilution error, reaction error, and air oxidation. The error can be decreased by following proper measurement techniques, taking a sufficient sample size, diluting properly, ensuring that reactions are complete, and keeping the sample from being exposed to air as much as possible.
Learn more about experimental error at https://brainly.com/question/2764830
#SPJ11
select the ester that is formed when propanoic acid reacts with isopropyl alcohol in the presence of heat and an acid catalyst.
When propanoic acid reacts with isopropyl alcohol in the presence of heat and an acid catalyst, the ester formed is isopropyl propanoate.
This reaction is a condensation reaction, which involves the loss of a water molecule. Esters are organic compounds formed by the reaction between carboxylic acids and alcohols in the presence of an acid catalyst.
The reaction is called an esterification reaction, and it produces an ester and water. In this reaction, propanoic acid reacts with isopropyl alcohol to produce isopropyl propanoate.
The chemical reaction can be represented as follows:
CH3CH2COOH + (CH3)2CHOH → CH3CH2COO(CH3)2 + H2O
The acid catalyst used in the reaction is usually concentrated sulfuric acid, which speeds up the reaction by removing water as it is formed.
The ester is characterized by a fruity odour, which is why esters are often used in perfumes and flavorings.
The reaction is reversible, and it reaches an equilibrium point where the forward and backward reaction rates are equal. To drive the reaction forward, excess alcohol is often used.
To know more about ester, refer here:
https://brainly.com/question/10840252#
#SPJ11
The volume of 9.7 moles of an ideal gas at stop will be
The volume of 9.7 moles of an ideal gas at stop will be 218.8 L
What is volume of gas ?
To answer this question, we need to know the conditions of "stop." Assuming that you meant "STP" (standard temperature and pressure), which is defined as 0°C (273 K) and 1 atm (101.3 kPa), the volume of 9.7 moles of an ideal gas would be 218.8 L, according to the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. At STP, the pressure is 1 atm and the temperature is 273 K. The value of R is 0.08206 L atm/mol K.
Therefore, V = nRT/P = (9.7 mol)(0.08206 L atm/mol K)(273 K)/(1 atm) = 218.8 L.
To know more about volume , visit:
https://brainly.com/question/24189159
#SPJ1
Complete question is: The volume of 9.7 moles of an ideal gas at stop will be 218.8 L.
the radioactive isotope 11c has a half life of 20.334 minutes. radioactive decay is a first order process. calculate the % of reactant that remains after 58.6 minutes of reaction.
The percentage of radioactive isotope 11C that remains after 58.6 minutes of reaction 41.0%.
The first-order rate law equation for radioactive decay is mentioned here,
N(t) = N₀ × e^(-kt). Here,
N(t) is the amount of the radioactive substance at time t
N₀ is the initial amount of the radioactive substance
k is the rate constant for the decay process
e is the mathematical constant e (approximately 2.71828)
The rate constant k can be determined by the half-life for decay, t½, using the following equation below,
k = ln(2) / t½
In this euation, ln(2) is the natural logarithm of 2 (which is approximately 0.69315).
In this case, the half-life of 11C is mentioned to be 20.334 minutes, so the rate constant is:
k = ln(2) / t½ = 0.69315 / 20.334 min = 0.03405 min⁻¹
Now we can utilize the rate law equation to calculate the amount of 11C remaining after 58.6 minutes. As the initial amount of 11C is 100% and the remaining amount at time t is the percentage we're looking for. Therefore percentage remaining after 58.6 minutes of reaction ,
N(t) = N₀ × e^(-kt)
N(58.6 min) = 100% × e^(-0.03405 min⁻¹ × 58.6 min)
N(58.6 min) = 41.0%
So the percentage of 11C that will be remaining after 58.6 minutes of reaction is found out to be 41.0%.
Learn more about radioactive decay :
https://brainly.com/question/1770619
#SPJ4
when 0.0400 mol koh is added to 1.0 l of a solution that is 0.25 m in nh3 and 0.20 m in nh4no3, the ph increases only slightly. which statement best explains this? g
When 0.0400 mol KOH is added to 1.0 L of a solution that is 0.25 M in NH3 and 0.20 M in NH4NO3, the pH increases only slightly.
The statement that best explains this is that the weak acid (NH4+) will combine with OH- to create a weak base (NH3). Explanation: NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH–(aq)The ammonium ion (NH4+) acts as a weak acid that combines with hydroxide ion (OH–) to form ammonia (NH3) and water (H2O).
It is important to remember that ammonia is not strong enough to raise the pH significantly and that ammonium is a weak acid that won't produce a lot of hydroxides. Therefore, the pH change will be negligible. The explanation for the above reaction is as follows: NH4+ + OH– ⇌ NH3 + H2O In this equilibrium, the weak acid (NH4+) will combine with OH– to create a weak base (NH3), resulting in the pH not rising significantly.
You can read more about molarity at https://brainly.com/question/30404105#:
#SPJ11
Answer with the Matching-match the letter with the correct item
Double replacement or metathesis reaction involves the exchange of ions between two compounds.
What are the types of reaction?Combination or synthesis reaction is a type of reaction that involves two or more reactants combining to form a single product. The general format is A + B → AB.
Decomposition reaction involves a single reactant breaking down into two or more products. The general format is AB → A + B.
The matching of the letters are;
1 - C
2 - H
3 - E
4 - F
5 - A
6 - B
7 - I
8 - J
9 - G
10 - D
1) False
2) False
3) True
4) False
5) True
6) True
7) True
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
as electrons are passed down an electron transport system, choose one: a. h2o is produced. b. the electrons are also pumped across a membrane. c. protons are pumped across a membrane. d. nadh is produced.
As electrons are passed down an electron transport system protons are pumped across a membrane.
The correct answer is option C.
When electrons pass through the electron transport chain, they lose energy. As low-energy electrons break down oxygen molecules and produce water, high-energy electrons from NADH or FADH2 complete the chain. The electron transport pathway produces three molecules of water for every three carbon sugars broken down during aerobic respiration.
This means that when six carbon sugars are broken down, six molecules of water are produced. The end products of electron transport include NAD+, FAD, water, and protons. Since protons are propelled through the crystal membrane by the free energy of electron transport, they exit the mitochondrial matrix.
Learn more about electron transport system at
https://brainly.com/question/28163074
#SPJ4
how many grams of the excess reactant remain assuming the reaction goes to completion and that you start with 15.5 g of na2s and 12.1 g cuso4?
The reaction between Na2S and CuSO4 goes to completion, meaning that all of the available reactants will react. Therefore, the amount of excess reactant remaining is 0 g.
To calculate the amount of each reactant remaining, we need to look at the stoichiometric coefficients of the reaction. Na2S has a coefficient of 1, while CuSO4 has a coefficient of 2. This means that for every 1 mole of Na2S, 2 moles of CuSO4 are needed. We can use the given masses of each reactant to calculate the moles present.
For Na2S: 15.5 g x (1 mol/142 g) = 0.109 mol
For CuSO4: 12.1 g x (1 mol/159 g) = 0.076 mol
Since Na2S has a coefficient of 1, 0.109 mol is the amount of Na2S remaining. However, for CuSO4 the coefficient is 2, so we need to divide 0.076 mol by 2 to get the amount of CuSO4 remaining: 0.038 mol.
Finally, we can convert back to grams to get the amount of each reactant remaining:
Na2S: 0.109 mol x (142 g/1 mol) = 15.3 g
CuSO4: 0.038 mol x (159 g/1 mol) = 6.1 g
Therefore, the amount of excess reactant remaining is 0 g, and the amount of each reactant remaining is 15.3 g of Na2S and 6.1 g of CuSO4.
Learn more about reactants here:
https://brainly.com/question/13005466#
#SPJ11
how can the chemical potential energy in an endothermic reaction best be described?(1 point) responses
The chemical potential energy in an endothermic reaction is best described as the energy absorbed during a reaction, which increases the stability of the products formed.
The chemical potential energy in an endothermic reaction can best be described as the energy absorbed or gained. That is, chemical potential energy in an endothermic reaction refers to the energy needed for a reaction to occur.
The energy is absorbed from the surroundings or gained by the reaction when it occurs. The energy can be in the form of heat, light, or electricity.
The energy absorbed or gained by the reaction is then used to break the bonds of the reactants and form the bonds of the products.
Thus, in endothermic reactions, the reactants need energy to be transformed into products. The energy is then used to break the bonds of the reactants and forms the bonds of the products.
Learn more about Endothermic reactions here:
https://brainly.com/question/1160007
#SPJ11
if you wrote c6h11o5c6h11o6 as the molecular formula for sucrose, would that be correct? explain your answer.
Answer:
No the correct answer would be C12H22O11 this is because you have the same atoms listed in two different places.
Explanation:
Answer: If you wrote C6H11O5C6H11O6 as the molecular formula for sucrose, that would be incorrect. The correct molecular formula for sucrose is C12H22O11.
What is the correct molecular formula for sucrose?
The molecular formula for sucrose is C12H22O11. Sucrose is a disaccharide, which means it is made up of two simple sugar molecules. Sucrose is composed of one glucose molecule and one fructose molecule, which are bonded together by a glycosidic linkage between the anomeric carbon atoms.
If you wrote C6H11O5C6H11O6 as the molecular formula for sucrose, it would be incorrect because it doesn't accurately represent the composition of sucrose. The formula C6H11O5 represents a simple sugar molecule known as glucose, while the formula C6H11O6 represents another simple sugar molecule known as fructose. Sucrose, on the other hand, is made up of both glucose and fructose.
Therefore, the correct molecular formula for sucrose is C12H22O11.
Learn more about C12H22O11 here:
https://brainly.com/question/14315748#
#SPJ11
How many moles in 150mL of .65M NaCl?
Number of moles present in an aqueous solution can be determined by multiplying the concentration/molarity (in mol/L), by the volume (in L). Considering the units: mol/L × L = molL/L = mol.
Hence, moles (n) = concentration (c) × volume (V)
Therefore, n =cV = 0.65×0.150 = 0.0975 mol
which of the following most favors elimination rather substitution in a reaction with 2-bromopropane? question 6 options: sodium methoxide sodium ethoxide sodium isoproxide sodium tert-butoxide
The best choice to favor elimination over substitution in a reaction with 2-bromopropane is sodium tert-butoxide. This is because this reagent is a stronger base, allowing for the deprotonation of 2-bromopropane.
The reaction of 2-bromopropane most favors elimination over substitution when reacted with the sodium tert-butoxide favors elimination over substitution in a reaction with 2-bromopropane.
In organic chemistry, substitution reaction occurs when an atom or a group of atoms in a molecule is replaced by another atom or a group of atoms. In contrast, elimination reactions occur when atoms or groups of atoms are removed from a molecule. The most significant difference between the two is that one leaves another behind. This means that if one group is substituted by another, then it results in a completely different compound than before.
In the reaction between 2-bromopropane and sodium tert-butoxide, the sodium tert-butoxide (Na + OC(CH3)3) serves as a strong base. The tert-butoxide ion, as a strong base, abstracts a hydrogen ion from a carbon adjacent to the bromine, leading to the formation of a reactive alkene intermediate.
The elimination of HBr from 2-bromopropane to form propene is made possible by this alkene intermediate. Therefore, the reaction most favors elimination over substitution when reacted with sodium tert-butoxide.
For more such questions on sodium tert-butoxide , Visit:
https://brainly.com/question/29742455
#SPJ11
What is the pH of a 0. 1 M solution of TRIS [tris(hydroxymethyl)aminomethane] in the acid form? pKa = 8. 3
The pH of a 0.1 M solution of TRIS in the acid form is 4.15
The equation for the dissociation of TRIS in water is:
HTRIS ⇌ H+ + TRIS-
The acid dissociation constant, Ka, can be calculated from the pKa:
pKa = -log Ka
Ka = [tex]10^{-pKa}[/tex] = [tex]10^{-8.3}[/tex]
The expression for the equilibrium constant for the dissociation of the acid can be written as:
Ka = [H+][TRIS-]/[HTRIS]
At equilibrium, [H+] = [TRIS-] and [HTRIS] = [H+] + [TRIS-]
Therefore, [H+]²/[HTRIS] = Ka
[H+]² = Ka*[HTRIS]
[H+]² = [tex]10^{-8.3}[/tex]*[HTRIS]
[H+]² = 5.01 x [tex]10^{-9}[/tex]
[H+] = √(5.01 x [tex]10^{-9}[/tex]
[H+] = 7.07 x [tex]10^{-5}[/tex] M
The pH of the solution can be calculated as:
pH = -log[H+]
pH = -log(7.07 x [tex]10^{-5}[/tex])
pH = 4.15
Therefore, the pH of a 0.1 M solution of TRIS in the acid form is approximately 4.15.
To know more about solution click here:
brainly.com/question/1616939
#SPJ4
At this point, you should have some idea of how a strong base behaves in solution once it dissolves. Choose all that apply as they relate to a strong base.
Conjugates of strong bases are ions from group 1 and 2 of the periodic table
A strong base dissociates partially in solution to produce its conjugate
The conjugate of a strong base is basic in solution
Conjugates of strong bases are ions from the transition metals in the periodic table
A strong base dissociates completely in solution to produce its conjugate
The conjugate of a strong base is neutral in pH when in solution
Conjugates of strong bases are ions from groups 1 and 2 of the periodic table. The conjugate of a strong base is basic in solution.
A strong base dissociates completely in solution to produce its conjugate.
A strong base is a substance that completely dissociates in water to produce hydroxide ions (OH⁻). Since it completely dissociates, it does not have any remaining undissociated molecules or ions in the solution. Therefore, the conjugate of a strong base is simply the ion that is left over after the base dissociates, which is always a simple metal cation (from group 1 or 2 of the periodic table) and a hydroxide ion (OH⁻).
For example, sodium hydroxide (NaOH) is a strong base that dissociates completely in water to produce sodium ions (Na⁺) and hydroxide ions (OH⁻). The conjugate of NaOH is simply the sodium ion (Na⁺), which is a simple metal cation from group 1 of the periodic table.
The conjugate of a strong base is basic in solution because it is capable of accepting a proton (H⁺) from a water molecule to reform the original strong base. This is because the conjugate base has a pair of unshared electrons on the hydroxide ion that can accept a proton from water. Therefore, the conjugate base acts as a weak acid in the solution.
To learn more about conjugates please visit
https://brainly.com/question/29753209
#SPJ1
an unknown amine reacted with iodomethane and afforded the following tetraalkylammonium salt. what is the structure of the unknown amine?
The unknown amine reacted with iodomethane and afforded the following tetraalkylammonium salt.
The structure of the unknown amine is an aliphatic amine. An aliphatic amine is an organic compound with at least one nitrogen atom connected to alkyl groups. It may have single, double, or triple bonds between nitrogen and the carbon atoms of the alkyl group.
Aliphatic amines can be secondary, tertiary, or primary depending on the number of alkyl groups attached to the nitrogen atom.
In the case of the unknown amine, the number of alkyl groups connected to the nitrogen atom is four, meaning that it is a primary aliphatic amine. aliphatic amines have the general formula of RCH2NH2, where R represents a hydrocarbon chain.
To know more about aliphatic amine click on below link:
https://brainly.com/question/24114560#
#SPJ11
I NEED HELP ON THIS ASAP!!!
Let me know if you need the link to the simulation.
The average atomic mass of a mixture of isotopes is affected by the relative abundance of each isotope in the mixture and the mass of each isotope.
The atomic masses of beryllium and fluorine are:
Beryllium-9: 9.012 amuFluorine-19: 18.998 amuThe average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms is 6.9418 amu.
What is the average atomic mass of isotopes of an element?The average atomic mass of an element is calculated by multiplying the masses of all of its isotopes by the element's relative natural abundance.
Using the atomic masses of lithium-6 (6.015 amu) and lithium-7 (7.016 amu), we can determine:
a. Atomic mass of lithium-6 = 6.015 amu
b. Atomic mass of lithium-7 = 7.016 amu
To calculate the average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms, we use the formula:
average atomic mass = [(mass of isotope 1 x number of atoms of isotope 1) + (mass of isotope 2 x number of atoms of isotope 2)] / total number of atoms
Substituting the values:
average atomic mass = [(6.015 amu x 3) + (7.016 amu x 2)] / 5
average atomic mass = 6.9418 amu
Learn more about the average atomic mass of an element at: https://brainly.com/question/30587714
#SPJ1
Complete question:
1. What are the factors that affect the average atomic mass of a mixture of isotopes?
2. Beryllium (Be) and Fluorine (F) have only one stable isotope. Use the periodic table to complete the following table of the average atomic mass of one atom, two atoms, and three atoms of the isotopes
4. Lithium has only two stable isotopes. Use the sim to determine the following:
a. Atomic mass of lithium-6 = amu
b. Atomic mass of lithium-7= amu
c. Average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms = amu