if you lift weights faster than normal you have increased what?

A work
B force
C power
D distance​

john needs to measure the brightness of a light bulb using the metric system, in candela he expresses his measurement.

The decimal standard for measuring is a globally perceived decimalized arrangement of estimation. It is in far and wide use, and where it is taken on, it is the just or most normal arrangement of loads and measures. Decimal standard can be involved by a few groups all around the world as a solitary method for estimating the amounts. This will make them to effectively think about their works. The Decimal standard for measuring was first embraced in France, and essentially every country on the planet currently utilizes it. Be that as it may, for reasons unknown, America hasn't gotten the update yet. The decimal standard gives units of estimation to remove, volume, mass, time, and temperature. It constructs these units utilizing a fundamental unit and a bunch of prefixes. The accompanying rundown shows five significant essential units in the decimal standard.

Learn more about metric system, refer:

https://brainly.com/question/1851588

#SPJ4

Answer:

A. candela

Explanation:

I did a quiz with this question.

Answer:

Momentum of tennis ball = 0.048

Momentum of soccer ball = 6.88

momentum of soccer ball is greater than that of tennis ball.

Explanation:

For table tennis ball,

Momentum of tennis the ball is given by,

Momentum = mass × volume

Momentum =  0.003 × 16

Momentum = 0.048

For table soccer ball,

Momentum of the soccer ball is given by,

Momentum = mass × volume

Momentum =  0.43 × 16

Momentum = 6.88

Thus, momentum of soccer ball is greater than that of tennis ball.

If the atomic orbitals are oppositely charged and are out-of-phase combinations then they interact destructively.

In Chemistry, molecular orbital theory(MOT) indicates the design of electron movement in a molecule.

The theory also states that electrons have wave-like nature which occurs as a result of the combination of the atomic wavefunction.

Theory suggests that there are two types of orbitals in a molecule: bonding orbitals (BO) and anti-bonding orbitals(ABO).

More are the chances of molecule stability if the electrons are present in bonding orbitals rather than anti-bonding orbitals.

Molecular orbitals are produced by the overlapping of atomic orbitals. When only the crusts of waves overlap in molecule orbitals they form constructive interference while overlapping of troughs causes destructive interference.

If you need to learn more about the orbitals click here:

https://brainly.com/question/14361631

#SPJ4

The speed does the Earth-based observers measure for the approaching landing craft is 1.016 times the speed of light.

To find the answer, we have to know about the Lorentz transformation.

It is given that, an alien spaceship traveling at 0.600 c toward the Earth, in the same direction the landing craft travels with a speed of 0.800 c relative to the mother ship. We have to find the speed do the Earth-based observers measure for the approaching landing craft.

                  [tex]V_x=V_x'(1-\frac{VV_x}{c^2} )+V\\where,\\V_x'=0.8c\\V=0.6c[/tex]

             [tex]V_x=0.8c(1-\frac{0.8c*0.6c}{c^2} )+0.6c=1.016c[/tex]

Thus, we can conclude that, the speed does the Earth-based observers measure for the approaching landing craft is 1.016 times the speed of light.

Learn more about frame of reference here:

brainly.com/question/20897534

#SPJ4

Answer:

Inheritance

Explanation:

Passing of genetic material to offspring over the next generations

The amount of heat required to warm the ice is 38.317 KJ

What is specific heat capacity ?

In scientific terms, a specific heat capacity is the quantity of heat (J) absorbed by a material every time its temperature goes up 1 K (or 1 °C), given in J/(kg K) or J/(kg °C) per unit mass. formulae for specific heat capacity is given by

Given data:

The mass of ice is, m = 40.0 g.

The initial temperature is, T = - 10 degree Celsius.

The final temperature is, T' = 110.0 degree Celsius.

The heat capacity of ice is, c = 2.09 J/g C.

The heat capacity of steam is, c' = 2.01 J/g C.

When ice absorbs heat, the conversion takes place from ice to water (liquid) and from the liquid to steam at 110 degree Celsius. So,

The amount of heat absorbed is given as,

Q = m[c(T' - T) + c'T']

Q = 40[2.09 x (110-(-10)) + 2.01 x (110+273))]

Q = 38,317.2 J

Convert in kJ as,

Q = 38,317.2/1000

Q = 38.317 kJ

Thus, we can conclude that the amount of heat required to warm the ice is  38.317 kJ.

Learn more about the thermal equilibrium here:

https://brainly.com/question/14556352

#SPJ1

Even if in a piece of writing, you happen to use the author's last name in my sentence, you also need to use it in the in-text citation.

In academic writing, it is often important to quote the sources that one used in writing up the text. Failure to give accurate citation could be taken as plagiarism by the assessors.

Hence, even if in a piece of writing, you happen to use the author's last name in my sentence, you also need to use it in the in-text citation.

Learn more about referencing:https://brainly.com/question/14838736

#SPJ1

The net charge enclosed within the electric field is positive when more electric field lines leave a gaussian surface than enter it.

Remember, that a Gaussian surface is a three-dimensional closed surface that determines the flux of a vector field, often the gravity field, electric field, or magnetic field. A surface with more electric field lines departing than coming in indicates a net positive charge. It is important to note that E-field lines begin with positive charges and end with negative charges. This is characteristic of most gaussian surfaces. So, if more electric field lines exit than enter a gaussian surface, we may deduce that the enclosing net charge is generally positive.

To understand more about the relationship between net charge, electric field and Gaussian surface, click on

https://brainly.com/question/14834262

#SPJ4

Answer: The maximum possible speed v is √2(  hν - Ф  ) / m

Explanation: You could be referring to the provided explanation, despite the fact that the question isn't comprehensive. When a photon collides with the surface of any metal, it transmits all of its energy to the electron in the atom. The collision causes the electron to travel with a certain amount of kinetic energy. This is referred to as the photoelectric effect. The maximum kinetic energy is calculated using Einstein's equation for the photoelectric effect:

K.E. = hν - Ф

½ mv² = hν - Ф

Hence the maximum possible speed is:

v = √2(  hν - Ф  ) / m

For more information on the photoelectric effect refer to this link: https://brainly.com/question/25027428

#SPJ4

The magnitude of the magnetic moment due to the electron's motion is [tex]87.87 * 10^{-37}[/tex].

The magnetic pull and direction of a magnet or other object that produces a magnetic field are referred to as the magnetic moment in electromagnetism. Things that have magnetic moments include electromagnets, permanent magnets, various compounds, elementary particles like electrons, and a number of celestial objects (such as many planets, some moons, stars, etc).

The term "magnetic moment" really refers to the magnetic dipole moment of a system, which is the portion of the magnetic moment that can be represented by an equivalent magnetic dipole or a pair of magnetic north and south poles that are only very slightly apart. The magnetic dipole component is adequate for sufficiently small magnets or over sufficiently large distances.

Calculations:

radius= [tex]5.29 * 10^{-11} m\\[/tex]

velocity=[tex]2.9* 10^{6} m/s[/tex]

Working formula, M=N/A

[tex]I=\frac{charge flow }{time taken} =\frac{e}{time taken\\}[/tex]

[tex]T= \frac{2xr}{v} =\frac{2xx * 5.29 * 10^{-11} }{2.9* 10^{6} }[/tex]

   =[tex]15.16 * 10^{-5} s[/tex]

[tex]I= \frac{1.6 * 10^{-19} }{15.16 * 10^{-5} }[/tex][tex]= 0.10 * 10^{-14}[/tex]

                     =[tex]1 * 10^{-15} C[/tex]

M=[tex]1x (1* 10^{-15} * (5.29 * 10^{-11} )^{2}[/tex]

  =[tex]87.87 * 10^{-37}[/tex]

To learn more about magnetic moment ,visit:

https://brainly.com/question/14298729

#SPJ4

The force produced by the train's engine will be 175000N.

Force is an external agent that has the power to alter an object's state of motion or rest. In a brief, force is a vector quantity that's also defined as a push or pull exerted on an object as a result of the object's contact with another object. The Newton (N) is the unit of force F.

F = ma

Here, F  is force, m is mass and a is acceleration of the object.

We are given here,

The force by the train weight = [tex]Fw[/tex] =  150,000N

The force creates by the friction = [tex]F_{f}[/tex] = 25,000N

Thus , to get the total force of the train's engine by adding force by weight and force by friction is given as,

[tex]F_{t} = F_{w}+ F_{f}[/tex]

Then for getting total force of the train's engine putting above values in the expression ,

[tex]F_{t} = 150,000 N +25,000N\\F_{t} = 175,000N[/tex]

Hence, the train’s engine has to produce 175000N force to become in equilibrium.

To know more about force

https://brainly.com/question/14447938

#SPJ1

The momentum of the pellet just before it hits the modelling clay is 0.0816 kg-m/s the velocity of the pellet just before it hits the modelling clay is 40m/s.

Assumption:

1)the pallet embeds into the clay.

A perfectly inelastic collision is one where the two objects that collide together become one object, losing the maximum amount of kinetic energy.

e=0

In perfectly inelastic collision the momentum is conserved.

given:

velocity of the truck + clay = 0.8m/s

mass of the truck + clay = 0.1 kg

mass of the pallet = 2g=0.002kg

a)

now since the example is of perfectly inelastic collision the momentum will be conserved .

i.e. momentum before collision  = momentum after collision

momentum of pallet =  momentum of( truck + clay)

momentum of pallet = (0.1+0.002)×0.8

momentum of pallet =0.0816 kg-m/s

b)

momentum before collision= mass of pallet ×velocity of pallet  + mass of truck × velocity of truck

velocity of pallet =0.0816/0.002

velocity of pallet =40m/s

learn more about collision here:

https://brainly.com/question/12644900

#SPJ9

The force applied to the small piston in order to lift the engine would be 376.56 N.

The total applied force per unit of area is known as the pressure.

The pressure depends both on externally applied force as well the area on which it is applied.

As given in the problem,

the cross-sectional area of the small piston =0.045 m2

the cross-sectional area of the large piston =0.239 m2

weight of the engine = 2000 N

By using the Pascal law,

Force /0.045 = 2000/0.239

Force = 376.56 N

Thus, the force applied on the small piston would be 376.56 N

Learn more about pressure here,

brainly.com/question/28012687

#SPJ4

1) Heat is added to a solid by exposing the solid to heat sources

2) The antifreeze is used to keep water liquid in winter

3) Frost is formed by the withdrawal of heat

We know that heat is that which leads to the existence of a temperature difference between two bodies. This the reason for a change in temperature of a body is the addition or the withdrawal of heat.

We could add heat to a body when we heat the body up by exposing the body to a source of heat. For instance, we add heat to food when we place the food on top of our gas cookers and light the gas cooker.

The antifreeze is used to decrease  the temperature at which water freezes. We know that addition of a solute would make pure water to freeze at a temperature that is less than zero degrees. This helps to keep the water in the liquid state at temperatures less than zero during winter.

Frost is formed when heat is withdrawn from a object thus that its temperatures decreases until it reaches the ice point.

Learn more about heat:https://brainly.com/question/1429452

#SPJ1

Answer:

1. When a solid is heated, it gains enough kinetic energy to break the force of attraction that holds it in a fixed shape, and it turns into a liquid.

2. The purpose of antifreeze is to transfer heat from a car's engine to a radiator without causing it to boil or freeze. The mixture raises the boiling point of water while decreasing its freezing point. Other chemicals in antifreeze protect the coolant passages in the metal radiator and engine from rust and corrosion.

3. When the temperature is freezing, water vapor condenses on the solid surface and condenses to produce dew, which eventually freezes.

As the speed of the object increases, the fluid resistance increases.

The fluid resistance is what could otherwise be referred to as the drag force. This is the force that inhibits the object from moving through the fluid. Thus it drags the object and prevents its motion.

This fluid resistance is caused by the layers of the fluid as the object moves through the fluid. As the speed of the object increases, the fluid resistance increases.

Learn more about fluid resistance:https://brainly.com/question/14272057

#SPJ1

Answer:

3,510 po yung sagot pa brainliest po

Explanation:

By adding the distances for cycling, running, and swimming, the total race distance can be determined. The distance covered by him is 13.5 km.

Converting all the distances to the same unit before combining them because the triathlete swims 500 meters, runs 3000 meters, and cycles 10.0 kilometers.

Divide 500 meters by 1000 to get kilometers: 500 meters divided by 1000 equals 0.5 kilometers.

Divide 3000 meters by 1000 to get 3 kilometers: 3000 meters divided by 1000.

The triathlete completes a 0.5-kilometer swim, a 3-kilometer run, and a 10.0-kilometer bike ride.

Now that the distances have been added, the total is 13.5 kilometers: 0.5 kilometers for swimming, 3 kilometers for running, and 10.0 kilometers for cycling.

Consequently, the race's overall length is 13.5 kilometers.

Learn more about distance here:

https://brainly.com/question/34779919

#SPJ7

The electric field for 20 cm is 8.09 MN/C

Length of the straight filament = (20cm) (1m/100cm) = 0.2

Electric field for the straight conductor = [tex]E = \frac{2k_{e} \lambda}{r}[/tex]

E = [2(8.99 × 10^9 N·m^2/C^2)(90.0 × 10^-6 C/m)] / 0.2 m

E = 8.09 MN/C

The electric field is directed radially inward, toward the filament.

The electric field is a force produced by a charge near its surroundings. This force is exerted on other charges when brought in the vicinity of this field. SI unit of the electric field is N/C (Force/Charge).

Learn more about the electric field here:

https://brainly.com/question/8971780

#SPJ4

Speed is a scalar quantity that describes "how fast an object is moving." The rate at which an object travels a distance can be thought of as its speed. The time taken by Fernando is 56 s.

Speed is only the rate at which motion changes. Or just the distance a body travels in a unit of time. Velocity is the rate at which an object's position changes and it takes direction into account. Speed has just magnitude because it is a scalar quantity.

The expression used to calculate speed is:

Speed = Distance / Time

Time = Distance / Speed

t = 1680 / 30

t = 56 s

To know more about Speed, visit;

https://brainly.com/question/13263542

#SPJ7

here,

the inner diameter , d = 10 um = 10 * 10^-6 m

radius , r = d/2 = 5 * 10^-6 m

resistivity , p = 0.5 ohm.m

length , l = 6 mm = 0.006 m

the resistance , R = p * l /area

R = p * l /( pi * r^2)

R = 0.5 * 0.006 /(pi * ( 5 * 10^-6)^2) ohm

R = 3.82 * 10^7 ohm (Answer)

the resistance of a wire is 3.82 * 10^7 ohm

Neurons, or nerve cells that transmit nerve impulses, consist of a cell body, an axon, and a few dendrites. Signals travel through synapses, where the axon of one neuron meets the dendrites of another neuron, using chemicals called neurotransmitters.

An electrical signal that travels along a nerve fiber in response to a stimulus and conveys the recording of sensations from receptors or instructions to effectors: Propagation of an action potential along the length of a neuron.

Differential charges across the plasma membrane of neurons generate nerve impulses. How does this charge difference come about? The response contains ions, which are charged atoms or molecules.

Learn more about impulses here;

https://brainly.com/question/25700778

#SPJ4

The height attained by the ball is 11.86m

a ball is shot from the ground straight up into the air its initial and final velocity is

initial velocity, u = 50 ft/s = 50×0.305  = 15.25m/s

final velocity ,v = 0 m/s

gravity =-9.8 m/s²

( negative sign shows acceleration in opposite direction)

height =?

using the newton motion of equation

v² = u² + 2as

where

a= acceleration due to gravity(g)

s = height

v² = u² + 2gs

(0)² = (15.25)² + 2×(-9.8)×s

0  = (15.25)² -  19.6 × s

s= - (15.25)²/ 19.6

s = 11.86m

after ignoring the air resistance the maximum height of the ball is 11.86m

To learn more about motion under gravity -

https://brainly.com/question/27962354

#SPJ4

[tex]Given: Current $30 \mathrm{~A}$ along $x$-axis to left $\left(I_1\right)$current $50 \mathrm{~A}$ along $\gamma$-axis $(0=z, y=0.280 \mathrm{~m})$ bo righta) Take a point $P$ at distance $x$ below $x$-axis$B=$ Magnelic field at $P$$B_D=\frac{\mu_0 I_1}{2 \pi x} \hat{k}+\frac{\mu_0 I_2}{2 \pi(0.28+x)}(-\hat{k})=0\left(\mu_0=4 \pi_{\times 10^{-7}} \mathrm{n} / \mathrm{m}\right)$[/tex][tex]$\frac{\mu_0 I_1}{2 \pi \alpha}=\frac{\mu_0 I_2}{2 \pi(0 \cdot 28+x)} \hat{k} \Rightarrow \frac{\mu_0 30}{2 \pi \alpha} \hat{k}=\frac{\mu_0^x 50}{2 \pi(0.28+x)} \hat{k}$$\Rightarrow x=0.42 \mathrm{~m}$[/tex]

The magnetic impact on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it while the charge is travelling through a magnetic field.  The magnetic field of a permanent magnet pulls on ferromagnetic substances like iron and attracts or repels other magnets. A magnetic field that varies with location will also exert a force on a variety of non-magnetic materials by changing the velocity of those particles' outer electrons. Electric currents, such those utilized in electromagnets, and electric fields that change in time produce magnetic fields that surround magnetized things.

To know more about magnetic field, visit;

https://brainly.com/question/23096032

#SPJ4

The Spring constant (K) = 9 N/m.

We have a force of 8 lb is required to keep a spring compressed to 13 ft shorter than its equilibrium length.

We have to determine the Spring constant.

The restoring force is directed towards the Equilibrium position.

According to the question, we have -

Force = 8 lb = 8 x 4.45 = 35.6 Newton.

Displacement = 13 ft = 3.96 meter.

Now -

The Restoring force = Applied force

Therefore -

|F| = Kx

35.6 = 3.96K

K = 8.99 = 9 N/m.

The Spring constant K = 9 N/m.

To solve more questions on Spring Mechanics, visit the link below-

https://brainly.com/question/16448245

#SPJ4

The temperature in degrees Fahrenheit is 320 equal to twice the temperature in degrees Celsius.

The measurement of temperature as a physical quantity. In order to measure temperature, empirical scales take into account useful and trustworthy factors like the freezing and boiling temperatures of water.

The temperature will be solved as below:-

F = 2C

The temperature in degree centigrade is:-

C = ( 5 / 9 ) ( F - 32 )

Put the value in the equation above:-

F = 2 { 5 / 9 [ F -32 ]}

F = ( 10 / 9 ) [ F - 32 ]

( 9 / 10)F  = F - 32

( 9 / 10)F - F = 32

( -1 / 10)F = -32

F = 320°

Therefore, the temperature in degrees Fahrenheit is 320 equal to twice the temperature in degrees Celsius.

To know more about the temperature scale follow

https://brainly.com/question/23026747

#SPJ4

0.81 km far east she walked.

The ratio of the sum of quantities to the entire number of quantities is what is simply meant by the word "average." In Physics, an alternative strategy is used. Let's first define velocity precisely as well as speed and how the two are related before moving on to average velocity. The change in location of an object with respect to time is referred to as its speed. On the other hand, velocity is nothing more than the speed that is specified in relation to the direction that an item travels. For now, let's return to the average velocity before we get into further detail regarding the distinction between speed and velocity.

To learn more about Average velocity,  Visit:

https://brainly.com/question/1844960

#SPJ4

Positively charged rod acting as an attractor will cause spheres A and B's combined negative charges to gravitate toward sphere A. A and B's combined positive charge will concentrate in sphere B.

Since the spheres are oriented perpendicular to the rod, an equal force from the positively charged rod will pull the spheres' negative charges, C and D, towards the direction of the rod. However, they won't focus on just one area. There have been no charging movements.

Any geometry where angles may be measured has a perpendicular. When two lines cross, they make a 90° angle. Lines have perpendiculars running through them at every point along the length of them in the majority of geometries (including spherical, Euclidean, hyperbolic, and others). The answer to your query is indeed true.

To learn more about perpendicular, visit

brainly.com/question/16965473

#SPJ4

Answer: harvest moon

During the harvest season, they would worship the full moon, giving thanks for a plentiful harvest. The women in each family would prepare a table full of newly harvested rice and fruit, in an ancient tradition called 'charye. ' The origins of Chuseok can be traced back to this custom.

ceremonies

hope this helps

Collin can use stoichiometry chemistry to determine the mass of the s'more using this information.

The study of quantitative ratios or relationships between two or more substances undergoing a physical change or a chemical change is known as stoichiometry (chemical reaction). The word is derived from the Greek words "element" and "metron" in the Greek language (meaning "to measure"). Calculations involving stoichiometry typically involve the mass or volume of products and reactants.

The law of conservation of mass, which holds that matter cannot be generated or destroyed but can only be changed from one form to another, is explained by the basic mathematical principle of stoichiometry. A chemical reaction needs a balanced stoichiometry in order to start and proceed to completion.

To learn more about stoichiometry chemistry please visit-
https://brainly.com/question/9743981
#SPJ9

It is proved for gravitational radius that Rg=GMs/c^2 .

Given,

The mass of sun = Ms

Sphere of radius = Rg

Sun collapses to a sphere such that the work required to remove a small mass (m) from the surface would be equal to its rest energy mc^2 .

The given radius (Rg) is called as gravitational radius for sun.

We know,

gravitational potential energy Ug = G ×Ms×m/Rg

given, the rest energy, E =mc^2

As it is given that work required to remove small mass is equal to rest energy,

thus, Ug=E

G×Ms×m/Rg = mc^2

Rg =GMs/c^2

Hence, it is proved for gravitational radius that Rg=GMs/c^2 .

Total work done in assembling bodies together,in their respective places, is called gravitational potential energy of the system.

Learn more about gravitational potential energy here:

brainly.com/question/21555779

#SPJ4

The magnitude of the magnetic field in the region through the current passes is 8×10⁻³  T.

The magnetic field is defined as the field the magnetic materials generate or when an electric charge moves in a field region that generates the magnetic field.

It is given that:

A conductor carrying a current I = 15.0 A is directed along the positive x-axis and perpendicular to a uniform magnetic field.

As we know,

F = ilB

i = 15 A
F/l = 0.120 N/m

B = (F/l)(1/i)

B = 0.120(1/15)

B = 8×10⁻³  T

Thus, the magnitude of the magnetic field in the region through the current passes is 8×10⁻³  T.

Learn more about the magnetic field here:

brainly.com/question/14848188

#SPJ6