If the force between two charges is initially 1800 N then what will it be if one of the charges is moved 3x farther away?

An airplane and a freight train have the same momentum, but the train's speed is much slower due to its much larger mass. The train's speed is approximately 9.8 km/h. The correct option is B.

The momentum of an object is the product of its mass and velocity. If two objects have the same momentum, their product of mass and velocity will be equal. We can use this principle to determine the speed of the freight train, given the momentum of the airplane.

The momentum of the airplane is:

[tex]p = m \times v[/tex]

[tex]p = 21,700\;kg \times (1,200\;km/h \times 1000\;m/km)[/tex]

p = 26,040,000 kg m/s

Since the momentum of the airplane and the train are equal, we can set their momentum equations equal to each other:

[tex]p = m \times v[/tex]

[tex]26,040,000\;kg\;m/s = 9,600,000\;kg \times v[/tex]

Solving for v, we get:

v = 26,040,000 kg m/s / 9,600,000 kg

v = 2.71 m/s

To convert the velocity from meters per second to kilometers per hour, we multiply by 3.6:

[tex]v = 2.71 m/s \times 3.6\;km/h/m[/tex]

v = 9.8 km/h

Therefore, the speed of the freight train is approximately 9.8 km/h, which is option B.

In summary, the momentum of the airplane is used to determine the velocity of the freight train, which can be calculated using the momentum equation. The velocity of the freight train is found to be approximately 9.8 km/h.

To know more about speed refer here:

https://brainly.com/question/28060745#

#SPJ11

Answer:

setting a stationary body in motion.

Explanation:

like a stationary car will start moving when driving force is applied

Max would hear the clapping sound at a slightly slower tempo compared to the other students.

Assuming that the speed of sound in air is approximately 343 m/s at room temperature and sea level, we can calculate the time it takes for the sound wave to reach Max's ears.

Using the equation distance = speed x time, we can rearrange it to get time = distance/speed. Plugging in the values, we get time = 80/343 = 0.233 seconds.

The metronome produces sound waves at a constant frequency. At a distance of 80 meters, the sound waves would have to travel a longer distance to reach Max's ears compared to the other students who are closer.

This means that the time it takes for the sound waves to travel from the metronome to Max's ears is longer than for the other students. As a result, Max would hear the clapping sound at a slightly slower tempo compared to the other students.

To know more about metronome, refer here:

https://brainly.com/question/25667592#

#SPJ11

The amount of heat transferred to the wooden beam is 2,040,000 Joules.

During the course of a hot, summer day, the temperature of the wooden beam slowly increases from 15°C at night to a final temperature of 35°C during the day.

To calculate the amount of heat transferred to the wooden beam with a mass of 60kg, follow these steps:

Step 1: Determine the temperature change (∆T)

∆T = [tex]T_{final} - T_{initial}[/tex]

∆T = 35°C - 15°C

∆T = 20°C

Step 2: Find the specific heat capacity (c) of the wooden beam

The specific heat capacity of wood varies depending on its type. For this example, let's use an average specific heat capacity of wood, which is approximately 1700 J/(kg·K).

Step 3: Calculate the amount of heat transferred (Q) using the formula:

Q = mc∆T

where

m is the mass of the wooden beam,

c is the specific heat capacity of wood, and

∆T is the temperature change.

Step 4: Plug in the values and solve for Q

Q = (60 kg)(1700 J/(kg·K))(20 K)

Q = 2,040,000 J

Therefore, the amount of heat transferred to the wooden beam is 2,040,000 Joules.

To know more about temperature refer here

brainly.com/question/11464844#

#SPJ11

The statement that is NOT true is: "the magnetic field lines always cross one another."

Magnetic field lines do not cross one other since they depict the direction of the magnetic field at every position in space. The crossing of two field lines would cause the magnetic field to have two opposite directions at the same spot, which is not possible.

The magnetic field's direction is determined by the orientation of the magnetic dipole moment at its source of starting.

Learn more about Lines of force:https://brainly.com/question/30422314

#SPJ1

The best choice that explains the definition of a variable is, a variable is something that can change and may affect the outcome in a scientific investigation. Option 2 is correct.

In scientific investigations, a variable is a factor or condition that can be changed or varied, and may have an effect on the outcome of the investigation. Variables are often classified into independent, dependent, and controlled variables. The independent variable is the factor that is intentionally changed by the researcher to observe its effect on the dependent variable, which is the factor that is being measured or observed.

While the other choices are related to scientific investigations, they do not accurately define what a variable is. A variable is a factor or condition that can change and potentially affect the outcome of an experiment or scientific investigation. Option 2 is correct.

To know more about variables, here

brainly.com/question/17344045

#SPJ4

Answer:

Developing decision-making skills is a vital aspect that occurs during the stage of intellectual development in adolescent development.

Explanation:

During adolescence, individuals undergo significant changes in their cognitive abilities, including an increase in abstract thinking, reasoning, and problem-solving skills. These changes allow adolescents to start thinking critically and independently, weigh options, and make more informed decisions about their lives.

As adolescents develop their intellectual abilities, they also gain more control over their lives and begin to make decisions about their education, career paths, relationships, and other important aspects of their lives. This is a critical time for developing decision-making skills, as the decisions made during adolescence can have significant and long-lasting effects on individuals' lives.

While other aspects of adolescent development, such as social, emotional, and physical development, are also important, intellectual development plays a crucial role in helping adolescents navigate the complex and challenging decisions they face as they transition to adulthood.

The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula

Time = distance / speed

Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.

In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).

Plugging in these values into the formula, we get

Time = 89.5 m / 343 m/s

Time = 0.261 seconds

Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

To know more about time here

https://brainly.com/question/22594054

#SPJ4

The copper cable's smallest possible cross-sectional area is 1.54 x 10-6 square meters.

To calculate the smallest cross-sectional area of the copper cable, we can use the formula for resistance:

R = ρ(L/A),

where R is the resistance (in ohms), ρ is the resistivity of the material (in ohm meters), L is the length of the conductor (in meters), and A is the cross-sectional area (in square meters).

Given the maximum allowable resistance (R) is 0.01 ohms per meter (one-hundredth of an ohm per meter) and the resistivity of copper (ρ) is 1.54 x 10^-8 ohm meters. Let's calculate the smallest cross-sectional area (A) that can be used.

First, we'll rewrite the formula for A:

A = ρ(L/R).

Since R is given as ohms per meter, we can set L to 1 meter for simplicity, and the formula becomes:

A = ρ(1/R).

Now, we can plug in the given values:

A = (1.54 x 10^-8)/(0.01).

A = 1.54 x 10^-6 square meters.

So, the smallest cross-sectional area of the copper cable that could be used is 1.54 x 10^-6 square meters.

Know more about Resistance here:

https://brainly.com/question/30799966

#SPJ11

The stunt woman experienced a force of 1393 N while landing in the net.

A 100 kg stunt woman falls from a 9.9 m high building and is slowed down by a net over the course of 1 s. To calculate the force she experienced while landing, we first need to determine her velocity when hitting the net.

We can use the formula: v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity (0 m/s), a is the acceleration due to gravity (9.81 m/s^2), and s is the distance fallen (9.9 m).

v^2 = 0 + 2(9.81)(9.9)
v^2 = 194.118
v = √194.118 ≈ 13.93 m/s

Now, we can use the impulse-momentum theorem to find the force: Ft = mv - mu
where F is the force, t is the time taken to slow down (1 s), m is the mass (100 kg), and v and u are the final and initial velocities, respectively.

F(1) = (100)(13.93) - (100)(0)
F = 1393 N

To know more about the force, click here;

https://brainly.com/question/13191643

#SPJ11

The difference in efficiencies of the mechanical system can be attributed to several factors such as increase in frictional force between the tarp and the system, an increase in tarp weight owing to water absorption, and an overall increase in resistance on the grass court due to wetness.

Firstly, the frictional force between the tarp and the mechanical system may have increased due to water on the tarp, leading to a decrease in efficiency.

Secondly, the weight of the tarp may have increased due to water absorption, leading to a greater load on the mechanical system, which in turn reduces efficiency.

Thirdly, the presence of water on the grass court may have increased the overall resistance to the movement of the tarp, leading to a decrease in efficiency.

These factors combined may explain the observed difference in efficiencies between the clear, sunny day and after a rainstorm.

For more such questions on mechanical system, click on:

https://brainly.com/question/13189455

#SPJ11

No, our spring resonance model did not account for the heat energy in the medium. Heat energy is generated due to the friction between the spring and the medium during the oscillation of the spring.

This energy is dissipated into the medium in the form of thermal energy, causing the amplitude of the oscillation to decrease over time.

In order to develop an accurate and complete model of the spring resonance, we need to account for the heat energy generated during the oscillation.

This is important because the amount of heat generated depends on the mechanical properties of the medium and the frequency and amplitude of the oscillation, and can have a significant impact on the behavior of the system.

By accounting for heat energy, we can better understand the dynamics of the system and predict how it will behave over time.

This can be particularly important in practical applications, such as in engineering and design, where we need to know how a system will perform under different conditions and over long periods of time.

To know more about thermal energy refer here

brainly.com/question/30859008#

#SPJ11

The three components of the journey's vector is 267.7 m, the displacement by the time taken is 22.3 m/min, the average speed is 23 m/min and the average speed with a precision of ±5% and ±20 s is 21.9 m/min to 23 m/min.

Magnitude is a measure of the size or intensity of something. It is usually a numerical quantity or value, such as size, energy, power, intensity, brightness, strength, or speed. Magnitude is a mathematical concept that is used to compare and evaluate different values.

Using this theorem, we can find the magnitude of the displacement (d) by taking the square root of the sum of the squares of the three components of the journey's vector.
d = √(160² + (180*cos45)² + (250*cos35)²)
d = √(25600 + 25600 + 20625)
d = √71725
d ≈ 267.7 m

To calculate the average speed, we need to divide the magnitude of the displacement by the time taken.
Average Speed = d/t
Average Speed = 267.7 m/12 min
Average Speed = 22.3 m/min
To account for the precision of ±5%, we can add or subtract 5% of the displacement, and ±20 s of the time taken.

Using the new values, we can calculate the average speed as follows:
Average Speed = (267.7 ± 13.4 m)/(12 min ± 20 s)
Average Speed = (254.3 m - 281.1 m)/(11 min 40 s - 12 min 20 s)
Average Speed = (254.3 m/11 min 40 s) - (281.1 m/12 min 20 s)
Average Speed = 21.9 m/min - 23 m/min
Therefore, the average speed with a precision of ±5% and ±20 s is 21.9 m/min to 23 m/min.

To learn more about  magnitude

https://brainly.com/question/24256733

#SPJ4

Josh pushes a table with a force of 80. N at an angle of 30° to the table. If he pushes the table 5 meters then Josh has done 346.41 Joules of work on the table.

To calculate the work done by Josh on the table, we can use the formula:

[tex]W = F \times d \times cos(\theta)[/tex]

where W is the work done, F is the force applied, d is the distance moved, and theta is the angle between the force and the direction of motion.

Substituting the given values, we get:

[tex]W = 80 N \times 5 m \times cos(30^{\circ})[/tex]

W = 346.41 J

Therefore, Josh has done 346.41 Joules of work on the table. To understand the concept of work, it is important to note that work is done when a force is applied to an object and it causes it to move.

In this case, Josh applies a force of 80 N at an angle of 30° to the table, causing it to move 5 meters. The work done is calculated by multiplying the force, distance, and cosine of the angle between them.

In summary, to calculate the work done by Josh on the table, we use the formula [tex]W = F \times d \times cos(\theta)[/tex] , where W is the work done, F is the force applied, d is the distance moved, and theta is the angle between the force and the direction of motion.

By substituting the given values, we find that Josh has done 346.41 Joules of work on the table.

To know more about force refer here:

https://brainly.com/question/26115859#

#SPJ11

The electric field in the copper wire is approximately 7.63 x [tex]10^{-5}[/tex] V/m. The drift velocity of free electrons in a copper wire is given as 8.32 x [tex]10^{-4}[/tex] m/s.

The electric field in a conductor is directly proportional to the drift velocity. The relationship between drift velocity and electric field is given by:

vd = (eEτ)/(m)

where,

vd = drift velocity of electrons

e = charge of an electron

E = electric field

τ = relaxation time of electrons

m = mass of an electron

Assuming the values of e, m, and τ for copper, we can solve for the electric field:

E = (vd x m)/(eτ)

E = (8.32 x [tex]10^{-4}[/tex] m/s x 9.11 x [tex]10^{-31}[/tex] kg)/(1.6 x [tex]10^{-19}[/tex] C x 2.3 x [tex]10^{-14}[/tex] s)

E ≈ 7.63 x [tex]10^{-5}[/tex] V/m

Therefore, the electric field in the copper wire is approximately 7.63 x [tex]10^{-5}[/tex] V/m.

To know more about drift velocity, refer here:

https://brainly.com/question/31580648#

#SPJ11

Answer:

Blue Jeans (are) blue light,

so that we see them as the color

The net force acting on q₂ when Particle is positioned between q₁ and q₃ is 0.486N.

Inversely proportional to the square of the distance between charges and proportionate to the product of their magnitudes is the electrostatic force of attraction or repulsion.

Force on q₂ due to q₁

F₁₂ = kq₁q₂ / r₁₂²

Putting the values provided , may get

F₁₂ = 9 x 10⁹ x 5 x 10⁻⁶ x 2.5 x 10⁻⁶ / (0.5)²

F₁₂ = 0.414 N

Force on q₂ due to q₃ placed at distance 0.25m

F₂₃ =kq₂q₃ / r₂₃²

Substitute the values, can get

F₂₃ =  9 x 10⁹ x 2.5 x 10⁻⁶ x 2.5 x 10⁻⁶ / (0.25)²

F₂₃ = 0.9N

The net force can be calculated as

F =F₂₃ -F₁₂

F =0.9 - 0.414 = 0.486 N

Therefore, the net force of q₂ is 0.486 N.

The complete question is,

Particles q1, q2, and q3 are in a straight line. Particles q1 = -5.00 x 10^-6 C, q2 = +2.50 x 10^-6 C, and q3 = -2.50 x 10^-6 C. Particles q1 and q2 are separated by 0.500 m. Particles q2 and q3 are separated by 0.250 m. What is the net force on q2?

To know more about Particle

https://brainly.com/question/23267775

#SPJ4

The fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and tension of 21.0 N is approximately 5.24 Hz.

Given the information provided, we have a 1.90-m-long wire with a mass of 0.100 kg that is fixed at both ends and has a tension of 21.0 N.
To find the linear mass density (µ) of the wire, we can use the following formula:
µ = mass/length
Using the given values, we can calculate µ as follows:
µ = 0.100 kg / 1.90 m = 0.05263 kg/m
Now that we have the linear mass density, we can find the fundamental frequency (f) using the formula:
f = (1 / 2L) × √(T / µ)
Where:
f = fundamental frequency
L = length of the wire
T = tension
µ = linear mass density
Substituting the values we found earlier, we get:
f = (1 / 2 × 1.90 m) × √(21.0 N / 0.05263 kg/m)
f ≈ 0.263 × √(399.2) ≈ 5.24 Hz
So, the fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and a tension of 21.0 N is approximately

5.24 Hz.

Learn more about frequency here:-

https://brainly.com/question/5102661

#SPJ11

net force: 60( not sure)

I would say it's unbalanced because these forces are not of the same magnitude.

The power output of the man pulling the bar can be calculated as follows:

Power = Work / Time

The work done by the man is equal to the force he exerts multiplied by the distance he moves the weights:

Work = Force x Distance

The force he exerts is equal to the weight of the weights he is lifting:

Force = Weight x g

where g is the acceleration due to gravity, which is approximately 10 m/s^2.

Plugging in the given values, we get:

Force = 30 kg x 10 m/s^2 = 300 N

Work = Force x Distance = 300 N x 0.5 m = 150 J

Power = Work / Time = 150 J / 0.5 s = 300 W

Now we can check which of the other options exerts the same power output:

Option A:

Force = 25 kg x 10 m/s^2 = 250 N

Work = Force x Distance = 250 N x 2.4 m = 600 J

Power = Work / Time = 600 J / 2.0 s = 300 W

Option B:

Force = 45 kg x 10 m/s^2 = 450 N

Work = Force x Distance = 450 N x 2.4 m = 1080 J

Power = Work / Time = 1080 J / 3.0 s = 360 W

Option C:

Force = 45 kg x 10 m/s^2 = 450 N

Work = Force x Distance = 450 N x 0.5 m = 225 J

Power = Work / Time = 225 J / 0.5 s = 450 W

Option D:

Force = 30 kg x 10 m/s^2 = 300 N

Work = Force x Distance = 300 N x 0.5 m = 150 J

Power = Work / Time = 150 J / 1.5 s = 100 W

Therefore, options A and B exert the same power output as the man pulling the bar, while options C and D do not.

Answer:

1.  0.102 mol/kg.

2. 0.444 mol/kg.

Explanation:

To calculate molality, we need to know the moles of solute (NaCl) and the mass of the solvent (water) in kilograms. First, we need to convert the mass of NaCl to moles by dividing by its molar mass. Then we convert the mass of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent.

First, we need to convert the mass of glucose to moles by dividing by its molar mass. Then we convert the volume of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent. Finally, we need to round the answer to three significant figures.

Isaac Newton was born on January 4, 1643, in England. He was 23 years old when he formulated the theory of universal gravity in 1666.

This was during a period when he was isolating himself to avoid the bubonic plague outbreak that was ravaging England at that time.

While in isolation, Newton engaged in extensive scientific research and discovered the laws of motion, optics, and gravity.

His theory of universal gravitation proposed that every particle of matter in the universe attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

This theory revolutionized the field of physics and remains a fundamental concept in modern science.

To know more about bubonic plague, refer here:

https://brainly.com/question/23399204#

#SPJ11

You would need to pull on the string with a force of 5.76 N to produce the same acceleration you obtained with a force of 15 N on the chain.

To calculate the force needed to produce the same acceleration as a force of 15 N on the chain, we need to use the formula:
force = mass × acceleration

First, we need to calculate the acceleration of the bicycle wheel when a force of 15 N is applied to the chain. We can use the formula:
acceleration = [tex]\frac{acceleration}{mass}[/tex]
Assuming the mass of the wheel is negligible, we can simplify this to:
acceleration = [tex]=\frac{force}{0.38}[/tex] = [tex]\frac{15N}{0.38}[/tex]=39.47 N/m

Now we can calculate the force needed to produce the same acceleration when pulling on the string wrapped around the tire. We can use the formula:
force = mass × acceleration
The mass of the wheel does not change, so we can use the same acceleration value we calculated earlier. However, the radius of the tire is different from the radius of the gear, so we need to take this into account.

The circumference of the tire is 2π(0.38 m) = 2.39 m, while the circumference of the gear is 2π(0.14 m) = 0.88 m.

This means that the force needed to produce the same acceleration when pulling on the string is:
force = mass × acceleration × [tex](\frac{radius of the gear}{radius of the tire} )[/tex]
= 0.38 kg x 39.47 N/m x [tex](\frac{0.14 m}{0.38 m} )[/tex]
= 5.76 N

To know more about the different types of forces visit:

https://brainly.com/question/13191643

#SPJ11

Answer:

yes

Explanation:

A singly charged ion makes 6.00 rev in a 40.0 mt in 1.32 ms. The atomic mass of the singly charged ion is 24.3 atomic mass units

Physicist S.A. Goudsmit devised a method for accurately measuring the masses of heavy ions by timing their periods of revolution in a known magnetic field. This method is known as the magnetic moment method. It involves the use of a magnetic field to deflect the ion in a circular path, and measuring the time it takes for the ion to complete a full revolution. The mass of the ion can then be calculated from its charge, the magnetic field strength, and the time taken for one revolution.

In this case, we are given that a singly charged ion makes 6.00 revolutions in a magnetic field of 40.0 millitesla in 1.32 milliseconds. To calculate its mass in atomic mass units (amu), we can use the formula:

mass = (charge x magnetic field x period) / (2 x pi)

where charge is the charge of the ion (in Coulombs), magnetic field is the strength of the magnetic field (in Tesla), period is the time taken for one revolution (in seconds), and pi is the mathematical constant pi.

Since the ion is singly charged, its charge is 1.6 x 10^-19 C. Converting the magnetic field from millitesla to Tesla, we get 0.04 T. Converting the period from milliseconds to seconds, we get 0.00132 s. Plugging in these values, we get:

mass = (1.6 x 10^-19 C x 0.04 T x 0.00132 s) / (2 x pi) = 4.04 x 10^-26 kg

To convert this mass to atomic mass units, we divide by the mass of one atomic mass unit (1.66 x 10^-27 kg/amu):

mass in amu = (4.04 x 10^-26 kg) / (1.66 x 10^-27 kg/amu) = 24.3 amu

To learn more about : mass
https://brainly.com/question/86444

#SPJ11

The wavelength of the wave as we have it is 3m

A wave's wavelength is the separation between two successive locations on the wave that are in phase, or at the same stage of their cycle. In other terms, it is the separation between two wave crests or troughs.

We know that the wavelength = Number of crests = 3m

Wave speed = 3 m/s

We would then have that;

v = λf

v = wave speed

f = frequency

λ = wavelength

Thus since there are three crests then the wavelength must be 3m

Learn more about wavelength:https://brainly.com/question/31143857

#SPJ1

The refractive index of the wave in medium X is 0.577.

The refractive index of a substance or medium measures how much light can bend through it. The difference between the speed of light in an object or medium and the speed of light in a vacuum (or in air) is how it is defined. Usually, the letter n is used to denote the refractive index.

The refractive index of a substance or medium is a critical property that determines how light will behave when it passes through it.

We know that the refractive index can be obtained as;

n = sin i/sinr

Thus we have that;

sin i = sin 30

sin r = sin 60

n = sin 30/sin 60

n = 0.577

Learn more about refractive index:https://brainly.com/question/23750645

#SPJ1

The direction of the change in momentum of the ball is in the opposite direction of its original momentum. This is because when the ball bounces off the floor, it experiences an equal and opposite force, which causes its momentum to change direction.

This is known as an elastic collision, and the change in momentum is equal in magnitude to the original momentum but in the opposite direction. This is because the total momentum is conserved in the collision. This means that the sum of the momentum of the ball after the collision is equal to the sum of the momentum of the ball before the collision.

Since the ball has no external forces acting on it, the only way for the momentum to remain the same is for the momentum to change direction. Therefore, the direction of the change in momentum of the ball is in the opposite direction of its original momentum.

Know more about elastic collision here

https://brainly.com/question/31356190#

#SPJ11

The speed of a wave in a medium depends on the properties of that medium, such as its density and elasticity. The frequency of the wave, or the number of cycles it completes in a second, does not affect its speed.

Therefore, both wave A and wave B will travel through the air at the same speed, which is approximately 343 meters per second at room temperature and atmospheric pressure.

However, the wavelength of a wave is inversely proportional to its frequency, so wave B will have a shorter wavelength than wave A.

This means that wave B will have a higher energy and be more directional than wave A, but it will not travel faster through the air.

In summary, the frequency of a wave does not affect its speed in a given medium, and both wave A and wave B will travel through the air at the same speed of approximately 343 meters per second.

To know more about elasticity refer here

https://brainly.com/question/28790459#

#SPJ11