The given statement is True, if the concentrations of a weak acid and its conjugate base differ by more than a factor of 5, the solution does not have the capacity to resist large pH changes.
A solution's ability to resist pH changes is known as its buffer capacity. Buffer solutions are made up of a weak acid and its conjugate base or a weak base and its conjugate acid. The buffer capacity is dependent on the concentrations of these components.
For a buffer to be effective, the concentrations of the weak acid and its conjugate base should be close to each other. Ideally, they should have equal concentrations for the maximum buffering capacity. If their concentrations differ by more than a factor of 5, the buffer capacity will be significantly reduced, and the solution will not be able to resist large pH changes effectively.
In summary, when the concentrations of a weak acid and its conjugate base differ by more than a factor of 5, it is true that the solution does not have the capacity to resist large pH changes. It is important to maintain appropriate concentrations of both the weak acid and its conjugate base to ensure effective buffering capacity in the solution.
for more such question on concentrations
https://brainly.com/question/28564792
#SPJ11
a mixture of gases contains 0.31 mol ch 4 , 0.25 mol c 2 h 6, and 0.29 mol c 3 h 8. the total pressure is 1.50 atm. calculate the partial pressures of the gases
The partial pressures of each gas in the mixture are: 0.325 atm for CH4, 0.263 atm for C2H6, and 0.412 atm for C3H8.
To calculate the partial pressure of each gas, we need to first find the total moles of gas in the mixture. The total moles can be calculated by adding up the moles of each gas:
Total moles = 0.31 mol CH₄ + 0.25 mol C2H₆ + 0.29 mol C3H₈ = 0.85 mol
Next, we can calculate the mole fractions of each gas:
Mole fraction of CH₄ = 0.31 mol / 0.85 mol = 0.365
Mole fraction of C2H₆ = 0.25 mol / 0.85 mol = 0.294
Mole fraction of C₃H₈ = 0.29 mol / 0.85 mol = 0.341
Finally, we can calculate the partial pressures of each gas by multiplying the mole fraction by the total pressure:
Partial pressure of CH₄ = 0.365 x 1.50 atm = 0.325 atm
Partial pressure of C₂H₆ = 0.294 x 1.50 atm = 0.263 atm
Partial pressure of C₃H₈ = 0.341 x 1.50 atm = 0.412 atm
Therefore, the partial pressures of each gas in the mixture are: 0.325 atm for CH₄, 0.263 atm for C2H₆, and 0.412 atm for C₃H₈.
To know more about partial pressure, refer here:
https://brainly.com/question/31214700#
#SPJ11
i need help with this problem i been stuck on it for a while now i need your help
Answer:
How should viruses be classified - as living or non-living?
Explanation:
which fabric dyed with american flag red displayed the most vivid color? explain why you choose that fabric type and discuss, using intermolecular forces, the reasoning behind your observations
The fabric that is dyed with American flag red that displayed the most vivid color is the cotton fabric. This is due to the fact that cotton has a high affinity for the dye molecules. The fabric also has a strong and large intermolecular force that helps in binding with the dye molecules. This strong intermolecular force increases the depth of color for the cotton fabric.
Intermolecular forces are forces that exist between molecules or atoms. These forces govern the physical properties of matter. The types of intermolecular forces are dipole-dipole forces, hydrogen bonds, van der Waals forces, ion-dipole forces, and London dispersion forces.
Dipole-dipole forces are forces that exist between polar molecules. These forces exist between the partially positive end of one molecule and the partially negative end of another molecule. Hydrogen bonds are forces that exist between molecules that contain hydrogen and a strongly electronegative atom such as oxygen or nitrogen. Van der Waals forces are forces that exist between nonpolar molecules. These forces are weak and are caused by temporary dipoles that are created in the molecules. Ion-dipole forces are forces that exist between ions and polar molecules. London dispersion forces are forces that exist between all molecules, both polar and nonpolar.These forces are weak and are caused by temporary dipoles that are created in the molecules.
To learn more about "American flag", visit: https://brainly.com/question/195647
#SPJ11
how can millimoles (or mmol) be calculated from molarity and volume? given that molarity is defined as mol/l, why can molarity also be calculated from mmol/ml?
Millimoles (mmol) can be calculated from molarity and volume using the following formula: mmol = M x V, where M is the molarity in mol/L and V is the volume in L. To calculate the molarity from mmol/mL, one can simply divide the mmol value by the volume in mL and convert to mol/L by multiplying by 1000.
Molarity is a measure of the concentration of a solution, defined as the number of moles of solute per liter of solution. Millimoles (mmol) is a unit of measurement that is often used in biochemistry and other fields to express small amounts of substances. To convert between molarity and millimoles, one can use the formula mmol = M x V, where M is the molarity in mol/L and V is the volume in L.
This formula allows one to calculate the number of millimoles of solute present in a given volume of solution, given the molarity. Conversely, to calculate the molarity from millimoles, one can simply divide the mmol value by the volume in mL and convert to mol/L by multiplying by 1000. It is important to use the correct units when making these conversions to ensure accurate results.
To know more about molarity, refer here:
https://brainly.com/question/16727614#
#SPJ11
correct the statement: sodium reacts with chlorine to form sodium chloride
Answer:
It is correct.
Explanation:
The statement “sodium reacts with chlorine to form sodium chloride” is correct.
Sodium and chlorine react to form sodium chloride, which is a type of salt. When sodium and chlorine combine, they form an ionic bond.
What is an ionic bond?An ionic bond is a type of chemical bond that occurs when one atom donates an electron to another atom.
In this case, sodium donates an electron to chlorine, which results in the formation of sodium chloride.
what is the activation energy for the isomerization of methyl isocyanide?
The activation energy for the isomerization of methyl isocyanide is 198 kJ/mol.
Isomerization is a chemical reaction in which a molecule undergoes a structural rearrangement without being broken down into smaller molecules. The activation energy is the energy that must be supplied to a chemical reaction to begin. It is a measure of the reaction's difficulty to begin.
Methyl isocyanide is a chemical compound that is a colorless gas with a powerful odor. It is a linear molecule with the chemical formula CH₃NC. This compound is of interest because of its unusual reactivity and its ability to form a stable complex with transition metals in coordination chemistry.
In the case of methyl isocyanide, the reaction pathway involves the rearrangement of a single bond from C-N to N-C. The energy required for this transformation, including the necessary breaking and formation of bonds, is known as the activation energy. It is this energy barrier that must be overcome for the reaction to proceed.
Thus, the activation energy of the isomerization of methyl isocyanide is 198 kJ/mol. This is a relatively high energy requirement, indicating that the reaction is unlikely to occur under normal conditions without additional energy input.
To know more about isocyanide refer here:
https://brainly.com/question/30826771#
#SPJ11
When 1 mole of hydrogen gas (H2) reacts with excess oxygen to form water at a constant pressure, 241.8 KJ of energy is released as heat. Calculate ΔH for a process in which 18.1 g sample of hydrogen gas (H2) reacts with excess oxygen at constant pressure.
the value of ΔH for the reaction of 18.1 g of hydrogen gas (H2) with excess oxygen to form water at constant pressure is -2,174.524 kJ. Since the value is negative, this indicates that the reaction is exothermic, and releases heat.
The first step is to calculate the number of moles of hydrogen gas (H2) in the 18.1 g sample:
moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 18.1 g / 2.016 g/mol
moles of H2 = 8.98 mol
Since 1 mole of hydrogen gas (H2) releases 241.8 kJ of energy, we can use the following formula to calculate the amount of energy released by 8.98 mol of H2:
ΔH = nΔH_rxn
where n is the number of moles of H2 and ΔH_rxn is the molar enthalpy change for the reaction.
ΔH = 8.98 mol x (-241.8 kJ/mol)
ΔH = -2,174.524 kJ
Energy is the capacity of a physical system to perform work. It is an essential aspect of our daily lives and is involved in almost all human activities, from heating and cooling our homes to powering transportation and manufacturing processes.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ1
1. Predict the types of
intermolecular forces that may act between
the molecules in these substances.
a. CO₂
b. NH,
c. HCI
d. C,H,
a. Due to the non-polar nature of CO2 molecules, London dispersion forces are the only intermolecular forces that may interact with them.
b. Due to the presence of a nitrogen atom with a single pair of electrons, NH3 molecules are polar and are capable of both hydrogen bonding and dipole-dipole interactions.
c. Due to their polar nature, HCl molecules are capable of both hydrogen bonding and dipole-dipole interactions.
d. Since C6H6 (benzene) molecules are non-polar, London dispersion forces are the only intermolecular forces that can act between them.
What is the correct net ionic equation to describe this precipitation reaction?Co(NO3)2(aq)+2NaOH(aq)⟶2NaNO3(aq)+Co(OH)2(s)Co(NOX3)X2(aq)+2NaOH(aq)⟶2NaNOX3(aq)+Co(OH)X2(s)
The correct net ionic equation for the given ionic equation is,
Co²⁺+ (aq) + 2 OH⁻⁻ (aq) → Co(OH)₂ (s)
Generally the net ionic equation is defined as a chemical equation for a reaction that counts only those species participating in the reaction. Basically the net ionic equation is mostly used in acid-base neutralization reactions, double displacement reactions, and redox reactions.
HCl, NaOH, and NaCl are some examples of strong electrolytes. As these electrolytes, completely dissociates into their ions in solution, and although it may written that "HCl" we really mean "H+ + Cl–". Also, "NaOH" is "Na+ + OH–" and "NaCl" is "Na+ + Cl–".
Hence, the correct net ionic equation for the given ionic equation is Co²⁺+ (aq) + 2 OH⁻⁻ (aq) → Co(OH)₂ (s).
Learn more about net ionic equation from the link given below.
https://brainly.com/question/29299745
#SPJ4
based on the definition of a mineral, being a naturally occurring solid, formed by inorganic processes, with a characteristic crystal structure and s specific chemical composition, which materials will be classified as minerals?
Based on the definition of a mineral, being a naturally occurring solid, formed by inorganic processes, with a characteristic crystal structure and a specific chemical composition, materials that will be classified as minerals are those that meet the given criteria.
What are minerals?A mineral is a naturally occurring, solid, crystalline substance that is inorganic in nature and has a distinct chemical composition. Minerals are typically formed by geological processes that occur over a long period of time. Minerals are composed of atoms and molecules that are arranged in a regular, three-dimensional pattern, known as a crystal structure. Because minerals are formed under specific conditions, they have distinct physical and chemical properties.
There are numerous minerals in the earth's crust, and they can be identified based on their physical and chemical properties. Mineralogists study minerals and their properties in order to better understand the earth's composition and history.
Mineral resources are commonly used for industrial purposes such as construction, fuel, and electronics.
Learn more about minerals on:
https://brainly.com/question/15844293
#SPJ11
In which compound does carbon have an oxidation state of -4?
1.CO
2.CO2
3.CCL4
4.CH4
Answer:
CH4
Explanation:
the rate constant for the decomposition of reactant a is 0.0092 s-1. how long will it take for 80% of the reactant to decompose? please answer in seconds and round your answer to one decimal place.
For 80% of the reactant to break down, it will take 31.5 seconds on average.
The breakdown formula is as follows?One reactant decomposing into two or more products is known as a decomposition reaction. The all-inclusive formula AB A + B can be used to represent this.
It is possible to express the rate law for reactant A's breakdown as follows: rate = k[A]
The integrated rate law for a first-order reaction is: ln([A]/[A]0) = -kt
When we enter this together with the supplied values into the integrated rate law, we obtain:
ln(0.20) = -0.0092 s⁻¹ * t
Solving for t, we get:
t = -ln(0.20) / 0.0092 s⁻¹
t = 31.5 seconds
To know more about reactant visit:-
https://brainly.com/question/13005466
#SPJ1
Answer:
174.94 sec
Explanation:
ln [A] = ln[A]o -kt
If 80% of the reactant has decomposed, that means that 20% of the reactant remain. Since the rate (k=.0092s^-1) has a unit of s^-1, 23 know its a first order, so we use:
ln [A] = ln[A]o -kt
ln (20) = ln (100) - (0.0092)t
ln(.2)/.0092 = t
174.94 sec = t
help me plesa.Which of the following are examples of negative tropism? (Select all that apply.)
a plant’s stem growing upward out of the ground
a plant’s leaves growing away from the sunlight
a plant’s leaves growing toward the direction of the sun
a plant’s roots growing down into the soil
Examples of negative tropism would be:
A plant’s leaves growing away from the sunlightA plant’s roots growing down into the soilWhat is negative tropism?Negative tropism is the growth or movement of a plant away from a stimulus, such as light or gravity.
In the case of the examples given, the plant's leaves growing away from the sunlight is an example of negative phototropism, while the plant's roots growing down into the soil is an example of negative geotropism.
Thus, the two examples of negative tropism are:
A plant’s leaves growing away from the sunlightA plant’s roots growing down into the soilMore on negative tropism can be found here: https://brainly.com/question/22044063
#SPJ1
The cytosol makes proteins true or false
Certain RNAs coordinate the synthesis of proteins at ribosomes, which are structures found in the cytoplasm.
Correct option is , True.
Do proteins get made in the cytosol?Every protein starts its production in the cytoplasm. Nonetheless, some are moved to other cellular locations while the majority remain there permanently. Some molecules are entirely produced in the cytoplasm.
What roles do the proteins in the cytosol play?It takes part in the signalling process that occurs between the nucleus, organelles, and cell membrane. It transports metabolites from the cell's production site to other parts of the body. It is critical that a cell divides throughout cytokinesis or mitosis. The cytoplasm is involved in eukaryote metabolism.
To know more about synthesis visit:
https://brainly.com/question/16987748
#SPJ1
the ions in calcium chloride dissociate in the presence of water. what is the cation that is produced in this reaction?
The cation that is produced when calcium chloride dissociates in the presence of water is Ca²⁺.
In the presence of water, calcium chloride dissociates into its constituent ions:
CaCl₂(s) + H₂O(l) → Ca²⁺(aq) + 2Cl⁻(aq)
As seen from the equation, the cation which is produced when calcium chloride dissociates in the presence of water is Ca²⁺.
Calcium chloride (CaCl₂) is a chemical compound that is commonly used in a variety of applications, such as in de-icing and dust control, as a food additive, and in water treatment.
It is a white crystalline solid that is highly soluble in water and has a salty taste. When calcium chloride is dissolved in water, it dissociates into calcium cations (Ca²⁺) and chloride anions (Cl⁻), making it an electrolyte. Calcium chloride is also used in the production of cement and as a desiccant to remove moisture from the air.
To know more about calcium chloride here
https://brainly.com/question/15296925
#SPJ4
which of the following is not one of the forms of vitamin a in your body and in food listed in the video? a.retinol b.retinoic acid c.retinal d.retinase e.retinyl esters
Retinase. Vitamins don't help to raise how many calories or how much energy the human body needs.
What three forms does vitamin A come in?Dietary supplements that contain vitamin A are often preformed vitamin A in the form of retinyl acetate or retinyl palmitate, provitamin A in the form of beta-carotene, or a combination of preformed and provitamin A.
What variations of vitamin A are there in the body?Preformed vitamin A (retinol, retinyl esters) and provitamin A carotenoids like alpha- and beta-carotene that are converted to retinol are the two main forms of vitamin A in the human diet. Animal products, fortified meals, and vitamin supplements are sources of preformed vitamin A.
To know more about Vitamins visit:-
brainly.com/question/10840252
#SPJ1
Please help me with this chemistry problem PLEASE!!
The theoretical yield of [tex]NH_4NO_3[/tex] in grams is 52,856 g or 52.9 kg.
To determine the theoretical yield of the limiting reactant in grams, we need to follow these steps:
Calculate the moles of each reactant using the ideal gas law: PV = nRT, where P is pressure, V is volume, n is moles, R is the gas constant, and T is the temperature in Kelvin.
For nitrogen gas (N2):
n = PV/RT = (1 atm) * (16608 L) / [(0.08206 L atm/mol K) * (293.15 K)] = 660.5 mol
For oxygen gas (O2):
n = PV/RT = (1 atm) * (7.2123 L) / [(0.08206 L atm/mol K) * (293.15 K)] = 0.2876 mol
For water (H2O):
n = PV/RT = (1 atm) * (7.2310 L) / [(0.08206 L atm/mol K) * (293.15 K)] = 0.2891 mol
Determine the limiting reactant by comparing the moles of each reactant to the stoichiometry of the balanced chemical equation. We can see from the equation that 2 moles of N2 react with 1 mole of O2 and 4 moles of H2O, so the mole ratio of N2 to O2 is 2:1 and the mole ratio of N2 to H2O is 2:4 or 1:2. Therefore, N2 is the limiting reactant since it has the smallest number of moles.
Calculate the moles of [tex]NH_4NO_3\\[/tex] produced by using the mole ratio between N2 and [tex]NH_4NO_3[/tex]. From the balanced chemical equation, we see that 2 moles of N2 produce 2 moles of[tex]NH_4NO_3[/tex]. Therefore, the number of moles of [tex]NH_4NO_3[/tex] produced is equal to the number of moles of N2:
moles of [tex]NH_4NO_3[/tex]= 660.5 mol
Convert the moles of [tex]NH_4NO_3[/tex] to grams using its molar mass. The molar
mass of NH₄NO₃ is 80.0434 g/mol.
mass of NH₄NO₃ = moles of NH4NO3 x molar mass of NH4NO3
mass of NH₄NO₃ = 660.5 mol x 80.0434 g/mol
mass of NH₄NO₃ = 52,856 g or 52.9 kg
Therefore, the theoretical yield of NH₄NO₃ in grams is 52,856 g or 52.9 kg.
learn more about limiting reagent here
https://brainly.com/question/26905271
#SPJ1
a certain cold remedy is a large tablet that is added to a glass of water. while the tablet dissolves in water, it releases a lot of bubbles. is a chemical or a physical change occurring? how can you tell?
When a large tablet dissolves in water, releasing a lot of bubbles, it is a: chemical change occurs.
The dissolved tablet changes the chemical composition of the water. Here's a step-by-step explanation:
When a large tablet is added to water, it begins to dissolve in the water. This process is known as a physical change because no new substance has been formed. However, the large tablet is made up of chemicals that are reacting with the water as it dissolves. As the chemicals react, they produce a lot of bubbles.
The bubbles are formed because of a chemical reaction that occurs when the tablet dissolves. As the chemicals in the tablet react with the water, they release gases such as carbon dioxide. The carbon dioxide gas is what causes the bubbles to form.
The chemical reaction that takes place between the chemicals in the tablet and the water is irreversible, meaning that a new substance is formed. The tablet dissolving in water is a great example of a chemical change because a new substance is formed when the chemicals in the tablet react with the water.
In this case, the bubbles are a byproduct of the chemical reaction that takes place when the tablet dissolves. Therefore, the release of bubbles during the dissolving of the tablet is an indication of a chemical change.
To know more about chemical change refer here:
https://brainly.com/question/23693316#
#SPJ11
help asap please 50 points !!!!
Which of the following will always produce a magnetic force on a nearby iron nail?
O a long piece of copper wire
O a large static electric charge
O an electric current
O an electric field
Answer: An electric current
Explanation:
As there is magnetic effect of electric current i.e when there is an electric current passing through any conductor then is produces a magnetic field around it depending on its shape. so due to magnetic field and a current there will be a magnetic force applied.
48L of hydrogen gas is heated from -20c to 90c and the pressure is decreased from 760 mmHg to 740 month. What Is the final volume?
Answer:
To solve this problem, we can use the combined gas law, which states that (P1 * V1) / T1 = (P2 * V2) / T2, where P is pressure, V is volume, and T is temperature in kelvins.
First, we need to convert the temperatures from Celsius to kelvins by adding 273.15. So -20°C is equivalent to 253.15 K and 90°C is equivalent to 363.15 K.
Plugging in the known values into the combined gas law formula, we get:
(760 * 48) / 253.15 = (740 * V2) / 363.15
Solving for V2, we find that the final volume of the hydrogen gas is approximately 53.7 L.
How are creating triglycerides from fatty acids and glycerol?
Triglycerides are formed by a process called esterification, in which fatty acids react with glycerol to form a molecule of triglyceride and three molecules of water. This process is catalyzed by enzymes known as lipases.
The chemical equation for the esterification of one molecule of glycerol with three molecules of fatty acid is as follows:
3 Fatty Acids + Glycerol → Triglyceride + 3 Water molecules
In this reaction, each of the three fatty acid molecules undergoes a condensation reaction with one of the hydroxyl (-OH) groups of the glycerol molecule.
This results in the formation of an ester bond between the fatty acid and the glycerol, and the release of one molecule of water. The reaction is repeated three times, resulting in the formation of a triglyceride molecule.
Triglycerides are a type of lipid that are stored in adipose tissue and serve as a source of energy for the body. They can be broken down by enzymes called lipases to release fatty acids and glycerol, which can then be used as a source of energy by the body.
To know more about Triglycerides here
https://brainly.com/question/5096426
#SPJ4
a solenoid is 1.8 m long and has 450 turns per meter. what is the cross-sectional area of this solenoid if it stores 0.39 j of energy when it carries a current of 12 a?
The cross-sectional area of the solenoid is approximately 2.84 × 10\-4 m\2. To find the cross-sectional area of the solenoid, we need to follow these steps:
1. Calculate the total number of turns in the solenoid.
2. Determine the inductance of the solenoid.
3. Calculate the cross-sectional area using the formula for the inductance of a solenoid.
Step 1: Calculate the total number of turns in the solenoid.
Total turns (N) = turns per meter (n) * length (L)
N = 450 turns/m * 1.8 m
N = 810 turns
Step 2: Determine the inductance of the solenoid.
The energy stored in the solenoid (W) can be calculated using the formula:
W = 0.5 * L * I\2
where L is the inductance and I is the current.
Rearrange the formula to find the inductance:
L = 2 * W / I^2
L = 2 * 0.39 J / (12 A)\2
L = 0.078 H (henry)
Step 3: Calculate the cross-sectional area using the formula for the inductance of a solenoid.
The inductance of a solenoid can be calculated using the formula:
L = μ₀ * N\2 * A / L
where μ₀ is the permeability of free space (4π × 10\-7 T·m/A), A is the cross-sectional area, and L is the length.
Rearrange the formula to find the cross-sectional area:
A = L * L / (μ₀ * N\2)
A = 0.078 H * 1.8 m / (4π × 10\-7 T·m/A * (810 turns)\2)
A ≈ 2.84 × 10\-4 m^2
The cross-sectional area of the solenoid is approximately 2.84 × 10\-4 m\2.
Know more about solenoids
https://brainly.com/question/1873362
#SPJ11
A solution is tested with litmus paper and its pH value is 3. 34. What color does litmus paper turn in this solution? 35. What is the hydronium ion concentroation of this solution? 36. What is the hydroxide ion concentration of this solution? 37. What is the pOH value of this solution is 3
QuestionHydrocarbons are the organic compounds that contain the elements ________________.Acarbon and oxygenBcarbon and hydrogenCcarbon and nitrogenDnone of theseMedium
Answer:
anyone know the answers
Explanation:
After determining the amount of moles required for one of the reactants, it was shown that was the limiting reactant and was the excess reactant.
When one of the reactants is identified as the limiting reactant and the other as the excess reactant, the limiting reactant will be entirely consumed by the reaction, while part of the surplus reactant will be left over.
The greatest amount of product that can be created from the specified amounts of reactants is determined by this crucial stoichiometric notion.
In the balanced chemical equation, compare the amounts of each reactant and their associated stoichiometric coefficients to identify which reactant is the limiting reactant.
As it will be consumed entirely before the other reactant, the limiting reactant is the one with the lower necessary number of moles for the reaction.
Stoichiometry can be used to determine how much of the limiting reactant can be converted into the product once it has been identified.
When comparing the amount of excess reactant used in the reaction to the total amount of excess reactant available, the surplus reactant is then recognized.
If needed, stoichiometry can be used to determine the quantity of extra reactant that is still present.
learn more about limiting reactants here
https://brainly.com/question/14222359
#SPJ1
Answer:
After determining the amount of moles required for one of the reactants, it was shown that ✔ copper was the limiting reactant and ✔ sulfur was the excess reactant.
Explanation:
edge 2023
Assuming each solution to be 0.10 M , rank the following aqueous solutions in order of decreasing pH. Rank the solutions from the highest to lowest pH. To rank items as equivalent, overlap them.
N2H4, Ba(OH)2, NaOH, HCI, HOCI
Highest PH to Lowest pH
The order of decreasing pH from highest to lowest is Ba(OH)2 > NaOH > N2H4 > HOCI > HCI.
pH measures how acidic or basic a solution is, based on the concentration of hydrogen ions (H+) in the solution. A low pH means a high concentration of H+ ions, making the solution more acidic. A high pH means a low concentration of H+ ions, making the solution more basic or alkaline.
NaOH is a strong base that completely dissociates in water, producing a high concentration of OH- ions and a pH of 14. Ba(OH)2 is also a strong base and produces twice as many OH- ions as NaOH, so it has an even higher pH than NaOH. HOCI is a weak acid partially dissociating in water, producing H+ and ClO- ions. The equilibrium between the two ions determines the pH, which is around 4.5 for a 0.10 M solution.
HCI is a strong acid dissociating completely in water, producing H+ and Cl- ions. Since the concentration of H+ ions is very high, the pH is very low (around 1). N2H4 is a weak base partially dissociating in water, producing NH3 and NH2- ions. The equilibrium between the two ions determines the pH, which is around 8.4 for a 0.10 M solution.
Learn more about acidity here: https://brainly.com/question/13043236
#SPJ11
Vinegar is a solution of acetic acid. What is the molarity of the solution produced
when 2.08 mol of acetic acid is dissolved in sufficient water to prepare 15 mL of
solution?
13.9 M
1.39 M
139 M
0.139 M
It's more common to prepare acetic acid solutions with concentrations in the range of 0.1 to 1.0 M.
What is Acetic Acid?
Acetic acid is an organic acid with the chemical formula CH3COOH. It is a clear, colorless liquid with a pungent odor and sour taste. It is also known as ethanoic acid and is the main component of vinegar, which is typically composed of 5-20% acetic acid by volume.
To calculate the molarity of a solution, we need to know the number of moles of solute and the volume of the solution in liters.
In this case, we are given the number of moles of acetic acid (2.08 mol) and the volume of the solution (15 mL or 0.015 L). We can use the formula for molarity:
Molarity = moles of solute / volume of solution (in liters)
Molarity = 2.08 mol / 0.015 L = 139 M
Therefore, the molarity of the solution produced is 139 M. However, it's important to note that this concentration is extremely high and not practical or feasible for most laboratory or industrial purposes.
Learn more about Acetic Acid from given link
https://brainly.com/question/24304533
#SPJ1
during a firework show the white incandescent light is produced by the following reaction. P+O2->P4O10. if a chemical uses 8.00 grams of oxygen in an excess of phosphorus how many grams of P4O10 will the chemist make
14.2g of [tex]P_4O_{10}[/tex] will be made by the chemist when a chemical uses 8.00 grams of oxygen in an excess of phosphorus.
Given the white incandescent light is produced during a firework show
The reaction is as follows:[tex]P + O_2 - > P_4O_{10[/tex]
After balancing the equation we get:[tex]4P + 5O_2 -- > P_4O_{10[/tex]
The mass of oxygen used = 8g
From the reaction we can see that 5 moles of Oxygen ([tex]O_2[/tex]) react with phosphorous to form 1 mole of [tex]P_4O_{10[/tex].
Mass of oxygen used initially = moles x molar mass of [tex]O_2[/tex] = 5 * 32 = 160g
mass of [tex]P_4O_{10[/tex] used = 1 mole x 284g/mole = 284g
for 160g of oxygen 284g of [tex]P_4O_{10[/tex] is produced.
Then for 8g of oxygen = 8 * 284/160 = 14.2g of [tex]P_4O_{10[/tex] is obtained.
To learn more about oxygen click here https://brainly.com/question/2272415
#SPJ1
a solution was prepared by adding 9.27 g of phosphoric acid to water had a volume of 92.80 ml. calculate the molarity of this solution.
The molarity of the solution when 9.27 g of phosphoric acid is added to water which had a volume of 92.80 ml is 1.02 M.
The molarity of the solution containing 9.27 g of phosphoric acid in 92.80 ml of water can be calculated as follows
Mass of phosphoric acid (H3PO4) = 9.27 g
Volume of solution = 92.80 mL
Convert volume of the solution to litres = 92.80 mL / 1000 = 0.0928 L
The molar mass of H3PO4 is:
Molar mass of H = 1.0079 g/mol
Molar mass of P = 30.9738 g/mol
Molar mass of O = 15.9994 g/mol
So, the molecular mass of H3PO4 = 3 × 1.0079 + 1 × 30.9738 + 4 × 15.9994= 98.0 g/mol
Now, Molarity (M) of the solution can be calculated by the formula:
M = mass of solute ÷ molar mass of solute × volume of solution in litres
Putting the values of mass, molar mass and volume of the solution in the above formula, we get:
M = (9.27 g ÷ 98.0 g/mol) ÷ 0.0928 L= 1.02 M
The molarity of the solution is 1.02 M.
Learn more about finding molarity : https://brainly.com/question/30404105
#SPJ11
calculate the mass of sodium acetate (nach3coo) required to prepare 50.0 ml of a 0.10 m sodium acetate solution, the molar mass of nach3coo is 82.03 g/mol
The mass of sodium acetate (CH₃COONa) required to prepare 50.0 ml of a 0.10 m sodium acetate solution is 0.41g.
0.10 M aqueous solution of sodium acetate means that 1000 mL of a solution containing 0.10 moles of sodium acetate.
1 ml of solution = 0.10moles
∴No. of moles of sodium acetate in 50mL
= (0.10/1000)×50
= 0.005
Number of moles is calculated as
=Mass given/ Molecular mass
The molar mass of sodium acetate = 82.03g/mol
∴Mass of sodium acetate acquired
=no of moles of sodium acetate × molar mass of sodium acetate
= 0.005 mol ×82.03 g/mol
= 0.41 g
To know more about no of moles here
https://brainly.com/question/10053179
#SPJ4