if the absorbance for a sample is large, then the intensity of light as it passes through the sample will

Answer:

L = L0 (1 - v^2 / c^2)^1/2

L0 is the proper length and L the distance measured by the space traveler

L = L0 (1 - .92^2)^1/2

L = L0 * .39 = 8.6 L-y * .39 = 3.4 L-y     as measured by space traveler

Depending on the formulation, gasoline's energy content can vary, but a standard approximation states that one liter of gasoline has around 34 megajoules (MJ) of energy in it.

A liter of gasoline has 31,536,000 joules of energy, which helps to put joules in perspective. A kilowatt-hour has a joule value of 3,600,000. Hence, the energy contained in a liter of gasoline is 8.76 kW/hr,

Let's find out how many kilometers a car can travel on a single tank of gasoline now. The distance driven here is 145 kilometers of distance in 10 litres. So, in 10 litres = 145 km distance covered. That is, in one litre of petrol a car travels a total distance of 14.5 km.

To know more about energy visit:-

brainly.com/question/1932868

#SPJ9

The longest wavelength of the light required to cause photoelectric effect is 349 nm (in nm units).

A photoelectric effect occurs when light falls on a metal surface, causing electrons to be emitted from the metal surface. It's a phenomenon that demonstrates the particle-like nature of light, which is made up of photons, as well as the wave-like nature of light.

Einstein first proposed the idea of the photoelectric effect, which eventually helped him win the Nobel Prize in Physics in 1921.Photoelectric Effect’s Formula

The photoelectric effect's formula is as follows:

Kinetic Energy = Energy of Photon - Work Function

KE = hf - Φ

For this question, we have work function, and we will use it to find the longest wavelength.

The formula of work function is given as Φ= hf0

Where f0 is the threshold frequency (frequency of the incoming light, below which the photoelectric effect does not occur).h = Planck’s constant = 6.626 x 10^-34 J s = 4.136 x 10^-15 eV s

The longest wavelength of the light required to cause photoelectric effect is given asλ = c / f

Here, λ is the wavelength of the incoming light, c is the speed of light, and f is the frequency of the incoming light.

We have to solve the work function equation to find the threshold frequency.

The formula is given asf0 = Φ/h

Substituting the values, we get:f0 = 3.56 eV / 4.136 x 10^-15 eV s = 8.60 x 10^14 Hz

To find the longest wavelength, we use the following formula:

λmax = c / f0 = (3 x 10^8 m/s) / (8.60 x 10^14 Hz) = 3.49 x 10^-7 m = 349 nm

For more question on photoelectric effect click on

https://brainly.com/question/1408276

#SPJ11

Opposition is when a planet is directly opposite the Sun in the sky, as viewed from Earth. Conjunction is when a planet is positioned closest to the Sun in the sky, as viewed from Earth. Greatest elongation is when a planet is at its farthest point away from the Sun in the sky, as viewed from Earth.

For planets closer to the Sun than Earth, opposition occurs when they are in the opposite direction to the Sun in the sky, while conjunction occurs when they are in the same direction as the Sun in the sky. For planets farther from the Sun than Earth, opposition occurs when they are in the same direction as the Sun in the sky, while conjunction occurs when they are in the opposite direction to the Sun in the sky.

At opposition, planets will appear brightest and most visible in the night sky. At conjunction, planets will appear faintest and least visible. At greatest elongation, planets will appear brightest and most visible during the daytime sky.

Know more about planets here:

https://brainly.com/question/29765555

#SPJ11

Answer: If instead you connected the battery to a resistor R/2, it would put out 5 volts.

The voltage put out if a battery connected to a resistor R puts out a voltage of 10 volts and a current of 0.5 amps, and if instead you connected the battery to a resistor R/2 is 5 volts.

The voltage of a battery connected to a resistor R puts out a voltage of 10 volts and a current of 0.5 amps can be found using the Ohm's Law which is:

V = IR

Where V is the voltage, I is the current, and R is the resistance of the resistor.

If you connect the battery to a resistor R/2, it would put out the voltage which can be calculated as follows:

V = IRV = 0.5 × 10V = 5V

Therefore, if instead you connected the battery to a resistor R/2, it would put out 5 volts.




Learn more about volts here:

https://brainly.com/question/29014695#

#SPJ11

Assuming both rocks are thrown from the same height and with the same initial speed, the rock thrown vertically downward will have a larger velocity upon hitting the ground than the rock thrown vertically upward.

This is because the rock thrown upward will lose speed as it moves against the force of gravity. Eventually, the upward motion will be slowed down until the rock reaches the highest point in its trajectory, where it momentarily stops and changes direction. From that point, the rock will accelerate downward, gaining speed as it falls back to the ground. However, the time spent traveling upward and the time spent traveling downward will not be the same, since the upward portion of the trajectory will be slower due to gravity slowing the rock's ascent. This means that the rock thrown upward will have a lower speed when it hits the ground compared to the rock thrown downward.

On the other hand, the rock thrown downward will experience the force of gravity pulling it towards the ground, causing it to accelerate and gain speed as it falls. Since it is initially moving downward, it will not slow down until it hits the ground, meaning that it will have a higher velocity upon impact than the rock thrown upward.

Learn more about force of gravity here: https://brainly.com/question/2537310.

#SPJ11

Energy from the Sun cannot directly reach the entire daytime side of the Earth during a solar eclipse.

during a solar eclipse, the Moon passes between the Sun and the Earth, blocking the direct path of sunlight to the Earth. Therefore, the energy from the Sun cannot directly reach the entire daytime side of the Earth during a solar eclipse.

However, the Earth's atmosphere scatters some of the Sun's light, which creates a faint glow known as the "solar corona" around the Moon during a total solar eclipse. This glow can provide some indirect illumination to the Earth's surface, but it is much less intense than direct sunlight and is limited to the regions near the path of the eclipse.

Learn about solar eclipse here https://brainly.com/question/1077760

#SPJ1

The tension in the rope is 173.55 N.

Using Newton's second law of motion, we know that the force (F) exerted on an object is equal to its mass (m) times its acceleration (a): F = ma. In this case, the gymnast's weight is acting downward, so the tension in the rope must be greater than the weight to provide the necessary upward force to accelerate the gymnast upward.

Thus, we can calculate the tension in the rope as follows:

Tension - Weight = ma

T - mg = ma

where T is the tension in the rope, m is the mass of the gymnast, g is the acceleration due to gravity (9.8 m/s^2), and a is the acceleration of the gymnast upward.

T - (63 kg)(9.8 m/s^2) = (63 kg)(2.5 m/s^2)

T = (63 kg)(9.8 m/s^2 + 2.5 m/s^2) = 173.55 N

Therefore, the tension in the rope is 173.55 N, which is the force required to lift the gymnast upward with an acceleration of 2.5 m/s^2.

To know more about tension click here:

https://brainly.com/question/30794023

#SPJ11

The primary advantage of using a semi-circular optical block is that it avoids refraction and reflection errors.

The following are some of the advantages of using a semi-circular optical block instead of a rectangular plate.

Optical devices like lenses, mirrors, prisms, and other optical components can be constructed using semi-circular optical blocks. The spherical shape of a semi-circular block allows for the construction of a wide range of optical devices with high accuracy and precision.

The semi-circular shape helps to eliminate refraction and reflection errors that can occur with rectangular plates. Because the light rays pass through a curved surface, they are not refracted, which helps to maintain the accuracy of the image.

When compared to rectangular plates, semi-circular blocks are easier to manufacture and are more cost-effective. They are also more durable and resistant to scratching, as they have no sharp edges. The semi-circular block also provides a more uniform light distribution, which helps to reduce distortion and improve image quality.

Semi-circular blocks are also used in a variety of other applications, including machine vision systems, optical sensors, and lighting systems.

In conclusion, a semi-circular optical block provides several advantages compared to a rectangular plate. It is able to focus light better, reduce diffraction, and reduce the amount of scattered light. These advantages result in better image quality and can be beneficial for various optics-related tasks.

To know more about refraction, refer here:

https://brainly.com/question/26528081#

#SPJ4

The centrifuge must rotate at approximately 54959 rpm to produce an acceleration of 115000 g's at a distance of 8.50 cm from the axis of rotation.

To solve this problem, we can use the formula for centrifugal acceleration:

a = (r * w^2) / g

where a is the desired acceleration in units of g's, r is the distance of the particle from the axis of rotation, w is the angular velocity of the centrifuge in radians per second, and g is the acceleration due to gravity (approximately 9.81 m/s^2).

First, we need to convert the distance from centimeters to meters:

r = 8.50 cm = 0.085 m

Next, we can rearrange the formula to solve for the angular velocity w:

w = sqrt((a * g) / r)

Substituting the given values, we get:

w = sqrt((115000 * 9.81) / 0.085)

w = 5758.6 radians per second

Finally, we can convert the angular velocity from radians per second to revolutions per minute (rpm):

1 revolution = 2π radians

1 minute = 60 seconds

w (in rpm) = (w / 2π) * 60

w (in rpm) = (5758.6 / (2π)) * 60

w (in rpm) ≈ 54959

Learn more about centrifugal acceleration at: https://brainly.com/question/79801

#SPJ11

a) The greenhouse effect refers to the process by which certain gases in the Earth's atmosphere trap and re-emit heat from the sun, leading to a warming effect on the planet's surface.

These gases, including carbon dioxide, water vapor, methane, and others, act like a blanket around the Earth, absorbing and trapping the sun's radiation and preventing it from escaping into space.

b) Atmospheric water vapor is a key component of the Earth's climate system, as it plays a crucial role in the greenhouse effect. As water vapor absorbs and re-emits radiation from the sun, it helps to trap heat in the atmosphere and keep the planet warm.

However, the amount of water vapor in the atmosphere is strongly influenced by temperature and other factors, which can in turn affect climate patterns and weather events.

c) The increased concentration of carbon dioxide in the atmosphere changes the climate because it enhances the greenhouse effect. Carbon dioxide is a particularly potent greenhouse gas, as it absorbs and re-emits radiation across a range of wavelengths, effectively trapping more heat in the atmosphere. As humans burn fossil fuels and engage in other activities that release carbon dioxide into the air, the concentration of this gas increases, leading to a buildup of heat-trapping gases and a corresponding increase in global temperatures.

d) The melting of continental glaciers and sea ice in polar regions can accelerate the rise in temperature through a process known as positive feedback. As the ice melts, it exposes more land and water, which in turn absorb more solar radiation and heat up. This leads to further melting, which exposes even more land and water, and so on.

Learn more about  The greenhouse effect

https://brainly.com/question/13706708

#SPJ4

If a train is traveling down the tracks at a constant velocity of 45 m/s, the resulting force acting on the train is 0 N. This is because the train is not accelerating or decelerating, and therefore, the net force acting on it is zero.

When an object is in motion with a constant velocity, the net force acting on it is zero.

This is because the forces acting in opposite directions cancel each other out, resulting in a net force of zero. In the case of the train, the forces that are canceling each other out are the forces of friction and air resistance acting in the opposite direction of the train's motion.

However, if the train were to accelerate or decelerate, there would be a resulting force acting on the train due to the change in velocity.

To practice more questions about the 'resulting Force':

https://brainly.com/question/4404327

#SPJ11

A. The waves can travel through empty space.

D. The waves can transfer energy through solids, liquids, and gases.

C. The waves transfer energy by causing particles of matter to move.

These waves transfer energy by causing particles of matter to move in the direction of the wave. This type of wave can travel through solids, liquids, and gases, but not through empty space.

There are two types of mechanical waves, longitudinal and transverse. Longitudinal waves are waves that travel in the same direction as the vibration of particles, while transverse waves travel perpendicular to the vibration of particles. An example of a longitudinal wave is a sound wave, while an example of a transverse wave is a water wave.

Mechanical waves are important to us as they are responsible for transferring energy through various mediums. For example, sound waves are propagated through the air and enable us to hear sound. This type of wave also transfers energy through solids, such as the vibrating strings of a guitar, and liquids, such as the waves of an ocean.

In conclusion, mechanical waves are waves that require matter to transfer energy and can transfer energy through solids, liquids, and gases. These waves travel in the same direction as the vibration of particles (longitudinal) or perpendicular to the vibration of particles (transverse). Mechanical waves are important to us as they transfer energy

Learn more about Mechanical waves here:

https://brainly.com/question/26116832

#SPJ1

The correct answer is that solar energy is also known as isolation.

Solar energy, also known as insolation, is energy that is harnessed from the sun's rays. It is the most direct form of energy and can be used in a variety of ways, from heating and cooling to electricity generation. Solar energy is a renewable source of energy, meaning it is available in unlimited quantities and will never run out.


Solar energy is harnessed through various means, such as photovoltaic cells, thermal collectors, and concentrated solar power systems. Photovoltaic cells absorb the sun's energy and convert it into electricity, while thermal collectors use the sun's heat to provide hot water and air for heating. Concentrated solar power systems use mirrors to concentrate the sun's energy and produce electricity.


Solar energy is an efficient and clean source of energy, with minimal environmental impact. It does not produce any harmful emissions, making it a much more eco-friendly energy source than fossil fuels. Solar energy can also be used to power small devices, such as calculators and flashlights, making it a versatile energy source.

Therefore, the correct answer is isolation.

To know more about solar energy, refer here:

https://brainly.com/question/9704099#

#SPJ4

The attractive forces that exist between gas particles cause the measured pressure of a gas to be lower than that predicted by the ideal gas law. is True because gas particles are in constant motion.

The attractive forces between gas particles are responsible for the deviation of real gases from ideal behavior, causing the pressure to be lower than expected. This is because the ideal gas law assumes that the gas particles are in constant motion and have no intermolecular forces acting upon them.

However, in real gases, there are attractive forces that exist between gas particles, which causes the gas molecules to have less kinetic energy and thus move more slowly. This slower movement leads to a lower pressure than would be predicted by the ideal gas law.

Learn more about ideal gas law at:

https://brainly.com/question/30458409

#SPJ11

For what wavelength of light is the scattering only 2.00% that of light with a visible wavelength of 510 nm? Rayleigh scattering is a phenomenon in which electromagnetic radiation, particularly light, is scattered by particles much smaller than the wavelength of the radiation. Rayleigh scattering occurs when light moves through a medium whose particles are small compared to the wavelength of the light.

It causes the blue color of the sky and the reddening of the sun during sunrise and sunset. The amount of scattering depends on the wavelength of light, the particle size, and the concentration of particles in the medium. The intensity of Rayleigh scattering is proportional to the fourth power of the frequency of the incident light.

As a result, the shorter the wavelength, the more intense the scattering. Rayleigh scattering is inversely proportional to the fourth power of the wavelength of light (λ⁻⁴), which means that shorter wavelengths scatter more light than longer wavelengths.

The percentage of light scattered by a medium at a specific wavelength is determined by the following formula: R = (I₁/I₀) x 100, where R is the percentage of light scattered, I₀ is the initial intensity of light, and I₁ is the scattered intensity of light. The scattering of light is only 2.00 percent of the visible light at 510 nm. As a result, the scattered intensity of light is 0.02I₀.

To determine the wavelength of light for which the scattering is just 2.00 percent of the scattered intensity of 510 nm light, we'll use the following formula: I₁ ∝ λ⁻⁴, where I₁ is the scattered intensity of light and λ is the wavelength of light. I₁(λ) / I₁(510 nm) = λ⁻⁴ / (510 nm)⁻⁴I₁(λ) / I₁(510 nm) = λ⁻⁴ / 1.682 x 10¹⁴I₁(λ) = (λ⁻⁴ / 1.682 x 10¹⁴) x I₁(510 nm)I₁(λ) = (λ⁻⁴ / 1.682 x 10¹⁴) x I₀ x 0.02I₁(λ) = (0.02I₀ / 1.682 x 10¹⁴) x λ⁻⁴We may use the equation to find the wavelength of light for which the scattering is just 2.00 percent of the scattered intensity of 510 nm light by substituting the values into the equation.

I₁(λ) = (0.02I₀ / 1.682 x 10¹⁴) x λ⁻⁴I₁(λ) = (0.02 x 1 W/m² / 1.682 x 10¹⁴) x λ⁻⁴I₁(λ) = (1.189 x 10¹⁴ / λ⁴) = 0.02I₁(λ) = 0.02 x 1.189 x 10¹⁴λ⁴ = 5.945 x 10¹⁵λ = 1.98 x 10⁻⁷ m = 198 nm The wavelength of light for which the scattering is just 2.00 percent of the scattered intensity of 510 nm light is 198 nm.

To know more about  wavelength of light refer here:

https://brainly.com/question/10518678#

#SPJ11

The seesaw moved when a third person pushed down on one side. This is because the seesaw is a simple machine that consists of a long plank balanced in the middle with a pivot point that allows it to move up and down.

When the two students sit on the seesaw in a way that makes it balance and not move, they are evenly distributed on each end. However, when the third person pushes down on one side, this distribution of weight becomes unequal, and the seesaw moves in the direction of the heavier side.

The heavier end of the seesaw moves down while the lighter end moves up. This is because the heavier side creates more force, or torque, on the pivot point, causing the seesaw to tilt towards that side.

As a result, the seesaw moves and is no longer in balance.

Learn more about balance and move at

brainly.com/question/14160688  

#SPJ11 

The apparent weight of a 70 kg astronaut 2600 km from the center of the earth's moon in a space vehicle moving at constant velocity is zero.

Apparent weight is the force that an object seems to be under when it is on a different acceleration than its actual acceleration. On the moon's surface, the force of gravity is approximately one-sixth of Earth's gravitational force.

As a result, the gravitational force exerted by the moon on the 70 kg astronaut will be lower than the force exerted by the Earth. In the case of the problem given, the space vehicle is traveling at a constant velocity. This implies that the space vehicle's acceleration is zero.

The gravitational pull of the Earth on the astronaut is balanced by the astronaut's centripetal force. As a result, the apparent weight of the astronaut is zero. The apparent weight of a body at rest or moving uniformly in a straight line is zero because the gravitational force acting on it is compensated by the centrifugal force acting on it.

Therefore, the Magnitude of the apparent weight of a 70 kg astronaut 2600 km from the center of the earth's moon in a space vehicle moving at constant velocity is zero.

To know more about apparent weight click here:

https://brainly.com/question/14323035

#SPJ11

Etoposide, sold under the trade name Etopophos, is used for the treatment of lung cancer, testicular cancer, and lymphomas. To select all the O atoms that are part of the acetals in etoposide,

1. Look for acetal functional groups in the etoposide molecule.

Acetals consist of a central carbon atom bonded to two alkoxy (OR) groups and two alkyl (R) groups.
2. Identify the oxygen atoms that are part of these acetal groups.

Upon examination of the etoposide structure, you will find that there are two acetal functional groups present. The oxygen atoms that are part of the acetals in etoposide are those directly bonded to the central carbon atom in each acetal group.

To know more about Etoposide here:

https://brainly.com/question/31234248

#SPJ11

Answer : A 1000 kg truck moving at 30 mph has a greater magnitude of linear momentum than a 500 kg car moving at 60 mph, due to the larger mass of the truck and the lower velocity of the truck.

The magnitude of linear momentum for an object is equal to the product of its mass and velocity. Therefore, a 1000 kg truck moving at 30 mph has a linear momentum of 30,000 kg-m/s, while a 500 kg car moving at 60 mph has a linear momentum of 30,000 kg-m/s as well. As the magnitudes of linear momentum for both the truck and car are equal, the truck has a greater linear momentum than the car.

This is because the truck has a larger mass than the car and is moving at a lower velocity. In other words, the higher mass of the truck counteracts its lower velocity, resulting in an overall greater linear momentum. This can be illustrated with the equation p = mv, where p is linear momentum, m is mass, and v is velocity.

Know more about linear momentum here:

https://brainly.com/question/27988315

#SPJ11

If a truck has a linear acceleration of 1.85 m/s² and the wheels have an angular acceleration of 5.23 rad/s², the diameter of the truck's wheels   0.71 m.

Linear acceleration refers to the time rate of change of linear velocity, whereas angular acceleration refers to the time rate of change of angular velocity. This is the primary differential between linear and angular acceleration. Simply said, changes in an object's linear velocity with respect to time are represented by changes in linear acceleration.

The angular acceleration can be deduced immediately from the concept of α =ΔωΔt because the ultimate angular velocity and time are both provided.

The link between linear acceleration (a) and rotational acceleration is expressed as a = r×α . When the angular acceleration increases, so will the linear acceleration's strength. Increased wheel angular acceleration, for instance, denotes an accelerated vehicle.

Linear acceleration is the uniform acceleration caused by a moving body moving along a straight line. There are three equations that are essential in linear acceleration, depending on parameters like start and terminal velocities, displacements, times, and acceleration.

Given :

linear acceleration a = 1.85 m/s²

angular acceleration α  = 5.23 rad/s²

radius r = a/ α  = [tex]\frac{1.85}{5.23}[/tex] = 0.354 m

diameter  d = 2r = 2 × 0.354 = 0.71 m

diameter of the wheels is  0.71 m.

To know more about angular acceleration, visit:

https://brainly.com/question/29428475

#SPJ1

The seven major divisions of the electromagnetic spectrum are Radio Waves, Microwaves, Infrared Radiation, Visible Light, Ultraviolet Light, X-Rays, and Gamma Rays.

To know more about the electromagnetic spectrum, refer here:

https://brainly.com/question/23727978#

#SPJ11

Yes, the voltage induced in a stationary coil when a magnet is placed inside of it is called electromotive force (EMF). When the magnet is pushed in at a faster rate, the induced voltage would be greater because he rate of change of the magnetic field, known as the flux, is increased when the magnet is pushed in at a faster rate.

Voltage is the electrical potential difference between two points. It is a measure of the potential energy per unit charge that is available to move charge between two points. Voltage is the cause of electric current, which is the flow of electric charge through a conductor. Voltage is measured in units of volts (V) and is the work done per unit charge. It is created by the accumulation of electrical charge, and can also be generated by a battery, generator, or any other source of electric energy.

Learn more about voltage at https://brainly.com/question/24858512

#SPJ11

Answer:

0.981m

Explanation:

KE = 1/2*m*v^2

= 1/2 * 4 * 4.4^2

= 38.72 J

assuming no energy is lost

KE = GPE

m * g * h = 38.72

4 * 9.8 *h = 38.72

h= 0.981 m

The magnitude of the electric field at point P which has coordinates (1, 0, 2) m is E = √((-6)² + 0² + 12²) V/m= √180 V/m= 6√5 V/m.

Over a certain region of space, the electric potential is (3x² - 4y² - 12z) V. Find the expressions for the x, y, and z components of the electric field over this region. For a uniform electric field in a given region, the electric potential over that region is related to the electric field through the relation

E = -∇V,

Here ∇ is the nabla operator in Cartesian coordinates.

So, for the given electric potential (3x² - 4y² - 12z) V, the electric field components are given by:

Ex = -dV/dx = -6x V/m

Ey = -dV/dy = 8y V/m

Ez = -dV/dz = 12 V/m

Therefore, the expressions for the x, y, and z components of the electric field over this region are Ex = -6x V/m, Ey = 8y V/m, and Ez = 12 V/m, respectively. The magnitude of the field at point P (1, 0, 2) m can be calculated using the expression for the magnitude of the electric field given by

E = √(Ex² + Ey² + Ez²).

Substituting the given coordinates of point P, we get

Ex = -6(1) V/m = -6 V/m

Ey = 8(0) V/m = 0 V

Ez = 12 V/m

Thus, the magnitude of the electric field at point P is 6√5 V/m.

You can learn more about the electric field at: brainly.com/question/8971780

#SPJ11

To find how far from the wall the pass will be picked up by the teammate, we will use the property that the angles formed by the path of the puck with the wall are congruent. This means the angle of incidence (the angle at which the puck hits the wall) is equal to the angle of reflection (the angle at which the puck leaves the wall).

Step 1: Identify the angle of incidence, which we will call angle A, and the angle of reflection, which we will call angle B. According to the given information, angle A = angle B.

Step 2: Measure the distance between the hockey player and the wall (let's call this distance "d1") and the distance between the teammate and the wall (let's call this distance "d2").

Step 3: Use trigonometry to find the distance between the hockey player and the point where the puck hits the wall (let's call this distance "x"). You can use the tangent function: tan(angle A) = d1/x.

Step 4: Solve for x: x = d1 / tan(angle A).

Step 5: Use trigonometry again to find the distance between the point where the puck hits the wall and the teammate (let's call this distance "y"). Use the tangent function again: tan(angle B) = d2/y.

Step 6: Solve for y: y = d2 / tan(angle B).

Step 7: Since angle A = angle B, we can now add x and y to find the total distance the pass traveled before being picked up by the teammate: total distance = x + y.

By following these steps, you can calculate how far from the wall the pass will be picked up by the teammate.

To Learn more :

https://brainly.com/question/29087040

#SPJ11

In a perfectly inelastic collision, the two objects stick together after the collision and move as a single combined object.

To solve the problem, we can use the law of conservation of momentum, which states that the total momentum of a system is conserved in the absence of external forces.

Before the collision, the momentum of the motorcycle is:

P1 = m1v1 = 500 kg * 20 m/s = 10000 kgm/s

where m1 is the mass of the motorcycle and v1 is its velocity.

The car is stationary, so its momentum before the collision is:

P2 = m2v2 = 1000 kg * 0 m/s = 0 kgm/s

where m2 is the mass of the car and v2 is its velocity.

The total momentum of the system before the collision is:

P1 + P2 = 10000 kg*m/s

After the collision, the combined mass of the wreckage is:

m = m1 + m2 = 500 kg + 1000 kg = 1500 kg

Let's assume that the wreckage moves at a velocity v after the collision.

By the law of conservation of momentum, the total momentum of the system after the collision is equal to the total momentum before the collision:

P = m*v

P = P1 + P2

10000 kg*m/s = 1500 kg * v

v = 10000 kg*m/s / 1500 kg = 6.67 m/s

Therefore, the velocity of the wreckage after the collision is 6.67 m/s.

The amount of displacement (in meters) that has occurred is 3 meters.

What is Displacement?

The displacement is the distance between the initial and final positions of an object. In this case, the amount of displacement can be measured by using the height of one of the dolls as the scale. Each doll is 4 centimetres tall. Therefore, if one of the dolls is raised up by x meters, the height of the other doll will be x - 0 meters.

The height difference between the two dolls will be x - (x - 0) = 0 meters. The fault is sloping downwards to the right, and it is causing the doll on the left to be raised up by a certain distance x. This means that there is a vertical displacement of x meters. Using the height of one of the dolls as the scale, the amount of displacement can be measured as follows:

4 centimetres tall doll = x meters of displacement.

Then, using a ratio and proportion method:

4 cm = x m

Thus, the number of meters that correspond to the 4 centimetres tall doll is:

x = 4 cm x 1 m / 100 cm = 0.04 m

Therefore, the amount of displacement is 0.04 m x 75 = 3 m.

To know more about Displacement:

https://brainly.com/question/29769926

#SPJ11

The circuit can be broken down into two sections, one containing bulb R1 and the other containing bulb R2. When bulb R4 is removed from the circuit, there is a break in the wire at its position. As a result, the circuit is broken, and the flow of electricity is halted. As a result, the current in the bulb R2 will be zero.

A circuit is a closed path that allows electricity to flow from one point to another. The electricity that flows through a circuit is referred to as an electric current. Electric current is measured in amperes (A). The bulbs R1 and R2 are connected in parallel to a voltage source, V. In parallel, the voltage across each bulb is the same, and the current flowing through each bulb is inversely proportional to its resistance.

When one bulb is removed from a parallel circuit, the others continue to operate. There is no interruption in the circuit when a bulb is removed from the circuit, and the voltage across the other bulbs remains constant. When bulb R4 is removed from the circuit, the wire is broken, and the circuit is disrupted. As a result, the current flowing through the circuit is halted, and there is no current flow through the bulb R2.

When a parallel circuit is broken, the current in that part of the circuit is disrupted, but the current in the other parts of the circuit continues to flow normally. As a result, bulb R1 will continue to glow, but bulb R2 will not be lit. In summary, the current flowing through the bulb R2 will be zero when the bulb R4 is removed from the circuit, leaving a break in the wire at its position.

To know more about A circuit refer here:

https://brainly.com/question/21505732#

#SPJ11

An ice skater is spinning about a vertical axis with arms fully extended. If the arms are pulled closer to the body, the angular momentum of the skater will remain constant while the kinetic energy of the skater increases. The correct option is C.

The angular momentum of the skater is given by

[tex]L = I\omega[/tex],

where I is the moment of inertia of the skater and ω is the angular velocity.

When the skater pulls their arms in, their moment of inertia decreases due to the decreased distance between their body and the axis of rotation.

According to the conservation of angular momentum, the product of the moment of inertia and angular velocity must remain constant. Therefore, if the moment of inertia decreases, the angular velocity must increase to keep the angular momentum constant.

The kinetic energy of the skater is given by

[tex]K = (1/2)I\omega^2[/tex]

As the moment of inertia decreases and the angular velocity increases, the kinetic energy of the skater also increases because it is proportional to the square of the angular velocity.

Therefore, the correct answer is: (C) Remains Constant Increases. The angular momentum remains constant, while the kinetic energy increases due to the increased angular velocity.

Learn more about angular momentum:

https://brainly.com/question/4126751

#SPJ11