if i contain 3 moles of gas in a container with a volume of 60 liters and at a tempurature of 400k what is the pressure indise the container

Answer:

3. collide with proper energy and proper orientation

Explanation:

Option 3, i.e., "collide with proper energy and proper orientation," is the correct answer.

Chemical reactions involve the rearrangement of atoms to form new molecules or compounds. In order for this rearrangement to occur, the reactant particles must collide with each other in a specific way. The collision must be energetic enough to break the existing chemical bonds and form new ones. Additionally, the particles must collide with each other in a specific orientation that allows the atoms to line up properly and form new chemical bonds.

Options 1 and 2 are incorrect as they do not play any role in chemical reactions. The distance between particles and the presence of attractive forces between them do not affect whether a chemical reaction will occur or not. Option 4 is incorrect as chemical reactions do not involve the conversion of chemical energy into nuclear energy.

Hopes this helps

The limiting reagent is nitrogen. The number of molecules of ammonia formed are 8.97. The number of hydrogen molecules in excess is 3.

You might have learnt that the formation of ammonia can be represented by:

N₂ + 3H₂ → 2NH₃

From the image provided by you, you have 6 molecules of hydrogen and 3 molecules of nitrogen. To determine the limiting reagent, you'll need to compare the number of moles of each reactant with the stoichiometric ratio in the balanced equation.

For nitrogen, you have:

3 molecules N₂ × 1 mole N₂/6.022 × 10²³ molecules N₂ = 4.98 × 10⁻²⁴ moles N₂

For hydrogen:

6 molecules H₂ × 1 mole H₂/6.022 × 10²³ molecules H₂ = 9.96 × 10⁻²⁴ moles H₂

Using the stoichiometric ratio from the balanced equation, you'll see that 1 mole of N₂ reacts with 3 moles of H₂ to produce 2 moles of NH₃.

Based on the calculations above, you can deduce easily that the amount of nitrogen is limiting because you only have 4.98 × 10⁻²⁴ moles of N₂, which is less than the amount of hydrogen required to react with it.

To find out how many molecules of NH₃ are formed, you'll have to use the amount of limiting reagent in your calculation. In this case, you're with 3 moles of NH₃ produced for every 1 mole of N₂, so calculate:

4.98 × 10⁻²⁴ moles N₂ × 3 moles NH₃/1 mole N₂ = 1.49 × 10⁻²³ moles NH₃

To convert this to molecules of NH₃, can use Avogadro's number:

1.49 × 10⁻²³ moles NH₃ × 6.022 × 10²³ molecules/mole = 8.97  molecules NH₃

So, 8.97 molecules of NH₃ are formed.

To determine the excess reactant, you first calculate the amount of hydrogen remaining after the reaction:

Amount of H₂ consumed = 3 moles NH₃ × 3 moles H₂/1 mole NH₃ = 9 moles H₂

Amount of H₂ remaining = 6 moles H₂ - 9 moles H₂ = -3 moles H₂

The negative value for the amount of hydrogen remaining indicates that there is an excess of hydrogen by 3 moles.

Learn more about limiting reagent here:

https://brainly.com/question/11848702

#SPJ1

THF is a poor solvent for Friedel-Crafts reactions using aluminum chloride or boron trifluoride because THF forms stable adducts with these compounds, THF is a strong Lewis base, and THF has a very low boiling point. Here options B, C, and D are correct.

THF is a polar aprotic solvent that is commonly used for many organic reactions, but it is a poor solvent for Friedel-Crafts reactions that use aluminum chloride or boron trifluoride. This is because THF can form stable adducts with these compounds, which can reduce their reactivity and prevent them from effectively catalyzing the reaction. Therefore, option B is correct.

In addition, THF is a strong Lewis base, which means that it can coordinate with Lewis acids like aluminum chloride or boron trifluoride and form adducts. This further reduces the reactivity of the Lewis acid, making the reaction less effective. Therefore, option C is also correct.

Finally, the boiling point of THF is relatively low (66°C), which can make it difficult to maintain the reaction at the desired temperature. This can affect the reaction kinetics and the yield of the product. Therefore, option E is also correct.

To learn more about Friedel-Crafts reactions

https://brainly.com/question/30861499

#SPJ4

Complete question:

Why is THF (tetrahydrofuran) a poor solvent for Friedel-Crafts reactions that use aluminum chloride or boron trifluoride?

A. THF is unstable in the presence of these compounds

B. THF forms stable adducts with these compounds

C. THF is a strong Lewis base

D. THF is a strong Lewis acid

E. The boiling point of THF is too low.

The rate at which the sun is currently converting hydrogen into helium is about 600 million tons per second. This process, known as nuclear fusion, takes place in the sun's core and produces vast amounts of energy, which is then radiated out into space in the form of sunlight.

The Sun is made up of about 74% hydrogen and 25% helium, with trace amounts of other elements such as oxygen, carbon, and iron. This composition is based on the Sun's observable surface layer, also known as the photosphere.

The Sun produces energy through a process known as nuclear fusion, in which hydrogen atoms combine to form helium. This process releases a tremendous amount of energy in the form of heat and light, which is radiated out into space as sunlight.

The energy produced by the Sun is what allows life to exist on Earth, as it provides the heat and light necessary for plants to grow and animals to survive.

To know more about sun refer to-

brainly.com/question/17376727#

#SPJ11

When a gas expands from 271 ml to 903 ml at a constant temperature, the work done (in joules) by the gas if it expands in vacuum is O J

According to the given data:

Initial volume occupied by the gas, V₁=271 ml =0.271 L

Final volume occupied by the gas, V₂= 903 ml =0.903 L

To calculate the work done (in joules) by the gas if it expands against a vacuum, We can use the following expression.

w = -P × ΔV

Since the gas expands against a vacuum, pressure will be equal to zero

P = 0.

Thus, w = 0 J

To know more about work done here

https://brainly.com/question/14529785

#SPJ4

a. HF is a weak acid and F- is the conjugate base.

b. NH4+ is a weak acid and NH3 is the conjugate base.

c. HCO3- is a weak acid and (CO3)2- is the conjugate base.

Weak acids are defined as the acids which do not completely dissociate in solution. A weak acid is known as any acid that is not a strong acid. The strength of the weak acid depends on how much it dissociates in the solution.

Conjugate bases are defined as the particle produced when an acid donates a proton.

We can write the equation as,

HF(aq.) <=> [tex]H^{+}[/tex](aq.) + [tex]F^{-}[/tex](aq.),

Here, HF is a weak acid and [tex]F^{-}[/tex] is the conjugate base

[tex]NH_4^{+}[/tex](aq.) <=> [tex]F^{-}[/tex](aq.) + [tex]NH_{3}[/tex](aq.),

Here, [tex]NH_4^{+}[/tex]  is a weak acid and [tex]F^{-}[/tex] is the conjugate base

[tex]HCO_{ 3} ^{-}[/tex](aq.) <=>[tex]H^{+}[/tex] (aq.) + [tex](CO_{3} )_{2} ^{-}[/tex](aq.),

Here, [tex]HCO_{ 3} ^{-}[/tex] is a weak acid and  [tex](CO_{3} )_{2} ^{-}[/tex] is the conjugate base

To learn more about Weak Acid

https://brainly.com/question/24018697

#SPJ4

Which of the following mixtures are buffers and why?

If it is a buffer, write an equilibrium equation for the conjugate acid/base pair.

a. KF/ HF

b. NH3 / NH4Br

c. KNO3 / HNO3

d. Na2CO3 / NaHCO3

The reaction in question is the water gas shift reaction:

CO2(g) + H2(g) ⇌ CO(g) + H2O(g)

At 1000 K, this reaction is endothermic, meaning that it requires heat as a reactant and will shift towards the product side at higher temperatures. However, we need to calculate the reaction quotient (Qc) for this system to determine whether the reaction will proceed towards products or reactants.

The reaction quotient Qc is defined as the product of the concentrations of the products, each raised to the power of their stoichiometric coefficients, divided by the product of the concentrations of the reactants, each raised to the power of their stoichiometric coefficients.

Qc = [CO][H2O] / [CO2][H2]

where the square brackets denote the concentration of each species.

We are given the partial pressures of each gas, but we need to convert these to concentrations using the ideal gas law:

PV = nRT

where P is the partial pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

For each gas, we can solve for the number of moles (n) and then divide by the total volume to obtain the concentration:

[CO2] = (0.0750 atm)(V) / (RT)

[H2] = (0.095 atm)(V) / (RT)

[CO] = (0.0340 atm)(V) / (RT)

[H2O] = (0.0650 atm)(V) / (RT)

where V is the total volume of the mixture.

Substituting these expressions into the equation for Qc, we obtain:

Qc = [(0.0340 atm)(0.0650 atm)] / [(0.0750 atm)(0.095 atm)]

Qc = 0.0232

If Qc < Kc, the reaction will shift towards the product side to reach equilibrium. If Qc > Kc, the reaction will shift towards the reactant side. If Qc = Kc, the reaction is at equilibrium and there is no net change.

The equilibrium constant (Kc) for the water gas shift reaction at 1000 K is not provided, so we cannot directly compare Qc and Kc. However, the small value of Qc (0.0232) suggests that the reaction is not at equilibrium and may shift towards the product side to reach equilibrium.

Therefore, based on the calculated value of Qc, the reaction may proceed towards products at 1000 K in the given mixture of gases.

To know more about equilibrium reactions, visit the link given below:

https://brainly.com/question/15118952

#SPJ4

Atoms share electrons unequally in a polar covalent bond.

In a polar covalent bond, the electrons are not shared equally between the atoms involved due to differences in electronegativity. Electronegativity is a measure of an atom's ability to attract electrons. When two atoms with different electronegativities form a bond.

The electronegative atom, leading to the formation of a polar bond. Polar covalent bonds can be found in molecules such as water ([tex]H_{2}o[/tex]), where oxygen is more electronegative than hydrogen, leading to an uneven distribution of electron density.

Nonpolar covalent bonds occur when atoms share electrons equally due to similar electronegativities. This results in an even distribution of electron density and no creation of partial charges. Examples of nonpolar covalent bonds can be found in molecules such as methane ([tex]CH_{4}[/tex]).

Know more about Atoms here :

brainly.com/question/28992636

#SPJ11

The value of the equilibrium constant (Kc) at 853 K for the given reaction is approximately [tex]8.81e^{-5}[/tex].

The quantitative representation of a chemical reaction's state at equilibrium is the equilibrium constant, abbreviated as K. It is described as the ratio of the reactant and product concentrations (or partial pressures for gas-phase reactions), each concentration being raised to the power of the corresponding stoichiometric coefficient in the balanced chemical equation.

The equilibrium constant, denoted as Kc, is a measure of the extent of a chemical reaction at equilibrium. For the given reaction:

[tex]2 HI(g)[/tex]  ⇌ [tex]H_2(g) + I_2(g)[/tex]

The equilibrium constant expression is:

[tex]K_c = \frac{[H_2][I_2]}{[HI]^2}[/tex]

Where [tex][H_2][/tex], [tex][I_2][/tex], and [tex][HI][/tex] are the molar concentrations of H₂, I₂, and HI, respectively, at equilibrium.

Given data:

[tex][HI] = 0.182 M[/tex]

[tex][H_2] = 2.53e^{-2} M[/tex]

[tex][I_2] = 3.28e^{-2} M[/tex]

Plugging these values into the equilibrium constant expression, we get:

[tex]K_c = \frac{(2.53e^{-2}) * (3.28e^{-2})}{(0.182)^2}[/tex]

[tex]K_c = 8.81e^{-5}[/tex]

learn more about equilibrium constant here:

brainly.com/question/3159758

#SPJ4

Based on the chemical equation provided, the missing reactant in the reaction is an alkene.

Tertiary alcohols are alcohols in which the carbon atom attached to the hydroxyl group is bonded to three other carbon atoms. They can be formed by the hydration of tertiary alkenes, which are alkenes in which the carbon atom at the site of the double bond is bonded to three other carbon atoms.

In the given reaction, the hydrogen molecule is added to the double bond of a tertiary alkene to form a new carbon-carbon single bond, while the two hydrogen atoms are added to the two carbon atoms of the double bond. The resulting compound is a tertiary alcohol. Therefore, the missing reactant in the reaction is a tertiary alkene that would undergo the addition of H₂ to form the given tertiary alcohol product.

To know more about reaction, here

brainly.com/question/14690610

#SPJ4

--The complete reaction is, What is the missing reactant in this organic reaction?--

23.22 mL of the 23.4% irrigation solution would be required to compound the given prescription.

To prepare a 10% NaCl solution using a 0.9% solution and a 23.4% solution in stock, we can use the formula:

C1V1 + C2V2 = C3V3

where C1 is the concentration of the first solution (0.9%), V1 is the volume of the first solution (unknown), C2 is the concentration of the second solution (23.4%), and so on.

Substituting these values into the formula, we get:

(0.9%)(V1) + (23.4%)(V2) = (10%)(1000 mL)

Simplifying this equation, we get:

0.009V1 + 0.234V2 = 100 mL

We have two unknowns and one equation, so we need another equation to solve for both V1 and V2.

Let’s use a mass balance equation:

mass of NaCl in first solution + mass of NaCl in second solution = mass of NaCl in final solution

The mass of NaCl in each solution is equal to its concentration multiplied by its volume and density.

For the first solution:

mass = (0.9 g/mL)(V1 mL)(0.01 g NaCl/g)

For the second solution:

mass = (23.4 g/mL)(V2 mL)(0.01 g NaCl/g)

For the final solution:

mass = (10 g/mL)(1000 mL)(0.01 g NaCl/g)

Substituting these values into our mass balance equation, we get:

(0.9 g/mL)(V1 mL)(0.01) + (23.4 g/mL)(V2 mL)(0.01) = (10 g/mL)(1000 mL)(0.01)

Simplifying this equation, we get:

0.009V1 + 0.234V2 = 100

Now that we have two equations with two non-specific values, we can answer them both at once.

Multiplying our first equation by -26/3, we get:

-7.8V1 - 6.12V2 = -260

Adding this equation to our second equation, we get:

-6.8V2 = -160

Solving for V2, we get:

V2 = 23.22 mL

Therefore, we need 23.22 mL of the 23.4% solution to compound this prescription.

To know more about concentration, refer:

https://brainly.com/question/17206790

#SPJ4

a. The fermi level assuming two electrons per atom 3.37 eV.

b. The density of states as a function of electron energy is, D(E) = 2 / [6.626 x 10^-34 J.s * (π x 0.15 x 10^-9 m)^2] * √(2 x 9.11 x 10^-31 kg) * √(E - 3.37 eV)

c. The behavior of the density of states near the Fermi energy can be used to check if it is correct.

The number of atoms in the one-dimensional crystal is given by:

N = L/a = (20 x 10^-6 m) / (0.15 x 10^-9 m) = 1.33 x 10^5 atoms

The number of electrons in the crystal, assuming two electrons per atom, is, 2 x N = 2 x 1.33 x 10^5 = 2.66 x 10^5 electrons

The Fermi level is the energy level at which the probability of finding an electron is 0.5. For a system of non-interacting electrons, the Fermi energy can be calculated using the equation:

EF = (h^2/8m)(3π^2n)^(2/3)

where h is Planck's constant, m is the mass of an electron, and n is the electron density. Plugging in the values, we get:

EF = (6.626 x 10^-34 J.s)^2 / (8 x 9.11 x 10^-31 kg) x (3π^2 x 2.66 x 10^5 m^-1)^(2/3) = 3.37 eV

The density of states is a function of the energy and can be calculated using the following equation,

D(E) = 2 / [h * (πa)^2] * √(2m) * √(E - EF)

where h is Planck's constant, a is the lattice spacing, m is the mass of an electron, and EF is the Fermi energy. Plugging in the values, we get:

D(E) = 2 / [6.626 x 10^-34 J.s * (π x 0.15 x 10^-9 m)^2] * √(2 x 9.11 x 10^-31 kg) * √(E - 3.37 eV)

In particular, the density of states should approach zero as the energy approaches the Fermi energy, because all available energy states have been filled. If the density of states near the Fermi energy does not exhibit this behavior, it may indicate that the model used to calculate the density of states is incorrect or that the system is not well-described by the model.

To know more about crystal, here

brainly.com/question/30740035

#SPJ4

--The complete question is, consider a one-dimensional crystal (similar to a nanowire) with length 20 um and lattice spacing 0.15 nm.

a. what is the fermi level assuming two electrons per atom?

b. what is the density of states as a function of electron energy?

c. how do you know if the density of states is correct--

Tires for trucks carrying flammable liquids are made electrically conducting to prevent static electricity buildup, which can create sparks and cause explosions or fires.

Tires for trucks carrying gasoline and other flammable liquids are manufactured to be electrically conducting to prevent static electricity buildup. Static electricity can be generated when the rubber tires rub against the ground or when they come into contact with other objects, such as fuel pumps or other metal objects.

In the presence of flammable liquids or gases, static electricity can create sparks, which can ignite the fuel and cause an explosion or fire. By making the tires electrically conducting, any static charges that build up on the tires are quickly dissipated to the ground, minimizing the risk of ignition. This is an important safety measure that helps to prevent accidents and protect people and property.

To know more about gasoline, here

brainly.com/question/27935095

#SPJ4

To determine the empirical formula of the lead oxide, we need to find the mole ratios of lead and oxygen in the product.

First, we need to determine the moles of each element present in the product:

Mass of lead = 1.154 g - x (where x is the mass of oxygen in the product)

Mass of oxygen = x

Next, we need to convert the masses of lead and oxygen to moles:

moles of lead = (1.154 g - x) / 207.2 g/mol

moles of oxygen = x / 16.00 g/mol

We can set up a ratio of moles of lead to moles of oxygen:

(1.154 g - x) / 207.2 g/mol : x / 16.00 g/mol

Cross-multiplying and simplifying:

(1.154 g - x) x 16.00 g/mol = 207.2 g/mol x

18.464 g - 16.00 x = 207.2 x

191.736 g = 223.2 x

x = 0.859 g

So, the mass of oxygen in the product is 0.859 g. The mass of lead in the product is 1.154 g - 0.859 g = 0.295 g.

Now we can calculate the moles of each element in the product:

moles of lead = 0.295 g / 207.2 g/mol = 0.001422 mol

moles of oxygen = 0.859 g / 16.00 g/mol = 0.0537 mol

To find the empirical formula, we need to divide the moles of each element by the smallest number of moles:

0.001422 mol / 0.001422 mol = 1

0.0537 mol / 0.001422 mol = 37.7

Rounding to the nearest whole number, we get the empirical formula PbO38.

It would take 1,127.7 kJ of thermal energy to change 500g of water from liquid phase to vapor phase at a constant temperature and pressure, assuming the theoretical heat of vaporization of water.

To calculate the amount of thermal energy required to change 500g of water from liquid phase to vapor phase, we need to use the heat of vaporization (also called enthalpy of vaporization) of water, which is the amount of energy required to convert one mole of liquid water to water vapor at a constant temperature and pressure.

The heat of vaporization of water is given as 40.65 kJ/mol. To calculate the energy required to vaporize 500g of water, we need to first calculate the number of moles of water present in 500g of water:

Number of moles of water = mass of water / molar mass of water

Number of moles of water = 500g / 18.02 g/mol

Number of moles of water = 27.74 mol

Now, we can use the following formula to calculate the amount of thermal energy required:

Energy = Number of moles x Heat of vaporization

Energy = 27.74 mol x 40.65 kJ/mol

Energy = 1,127.7 kJ

learn more about  molar mass here:

https://brainly.com/question/22997914

#SPJ1

The best syringe option for safely transferring aniline would be the 2.0 mL syringe, since it has the largest volume capacity and would require fewer transfers to add the required amount of aniline to the reaction flask.

This would reduce the risk of spillage and minimize the chances of exposure to aniline, which can be toxic and irritating to the skin, eyes, and respiratory system. It is important to use proper personal protective equipment (PPE) and work in a well-ventilated area when handling aniline or any other hazardous chemicals.

Acetylation is a chemical reaction that involves the introduction of an acetyl group (-COCH₃) into a molecule. In organic chemistry, the most common acetylation reaction involves the reaction of an acetylating agent, such as acetic anhydride or acetyl chloride, with an organic compound containing an amine (-NH₂) or hydroxyl (-OH) functional group.

To know more about aniline here

https://brainly.com/question/28724995

#SPJ4

1. The mass of KClO₃ that decomposed to produce 17.4 g of O₂ is 44.4 g

2. The mass of KClO₃ that formed 23.7 g of KCl is 39.0 g

3. The mole of O₂ that is formed from 1.45 moles of KClO₃ is 2.18 moles

4. The mole of KClO₃ that decomposed to produced 167.7 g of KCl is 0.22 mole

The mass of KClO₃ that decomposed to produce 17.4 g of O₂ can be obtain as follow:

2KClO₃ -> 2KCl + 3O₂

From the balanced equation above,

96 g of O₂ were obtained from 245 g of KClO₃

Therefore,

17.4 g of O₂ will be obtain from = (17.4 × 245) / 96 = 44.4 g of KClO₃

Thus, the mass of KClO₃ that decomposed is 44.4 g

The mass of KClO₃ that formed 23.7 g of KCl can be obtain as follow:

2KClO₃ -> 2KCl + 3O₂

From the balanced equation above,

149 g of KCl were obtained from 245 g of KClO₃

Therefore,

23.7 g of KCl will be obtain from = (23.7 × 245) / 149 = 39.0 g of KClO₃

Thus, the mass of KClO₃ is 39.0 g

The mole of O₂ that is formed from 1.45 moles of KClO₃ can be obtained as follow:

2KClO₃ -> 2KCl + 3O₂

From the balanced equation above,

2 mole of KClO₃ reacted to produce 3 moles of O₂

Therefore,

1.45 moles of KClO₃ will react to produce = (1.45 × 3) / 2 = 2.18 moles of O₂

Thus, the mole of O₂ formed is 2.18 moles

First, we shall obtain the mole of 16.7 g of KCl. Details below:

Mole = mass / molar mass

Mole of KCl = 16.7 / 74.5

Mole of KCl = 0.22 mole

Finally, we shall determine the mole of KClO₃ that decomposed. Details below:

2KClO₃ -> 2KCl + 3O₂

From the balanced equation above,

2 moles of KCl were obtained from 2 moles of KClO₃

Therefore,

0.22 mole of KCl will also be obtain from 0.22 mole of KClO₃

Thus, the mole of KClO₃ that decomposed is 0.22 mole

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

Balanced chemical equation for the reaction between hydrobromic acid (HBr) and aqueous ammonium carbonate is: 2HBr (aq) + (NH₄)2CO₃ (aq) → 2NH₄Br (aq) + CO₂ (g) + H₂O (l).

Process that results in chemical transformation of one set of chemical substances to another is called chemical reaction.

In this reaction, hydrobromic acid (HBr) reacts with aqueous ammonium carbonate [ (NH₄)2CO₃] to form ammonium bromide (NH₄Br), carbon dioxide gas (CO₂ ), and water (H₂O).

It's important to note that this reaction should be carried out with caution as hydrobromic acid is a strong acid and can be corrosive and dangerous. Proper safety precautions and equipment should be used when conducting this reaction.

To know more about chemical reaction, refer

https://brainly.com/question/25769000

#SPJ1

The molality of the solution is 0.55 m. Molarity is commonly used in chemical calculations and in the preparation of solutions of known concentration.

What is Molarity?

Molarity (M) is a measure of concentration in chemistry, defined as the number of moles of solute per liter of solution. It is represented by the formula M = n/V, where n is the number of moles of solute and V is the volume of the solution in liters.

We can use the following equation to calculate the molality of the solution:

ΔTb = Kb * molality

where ΔTb is the boiling point elevation, Kb is the boiling point elevation constant for the solvent, and molality is the molality of the solution.

Since the solvent is chloroform, we can look up its boiling point elevation constant in a reference table, such as:

Kb for chloroform = 3.63 ºC/m

The boiling point of the solution is given as 63.2 ºC, which is the boiling point of chloroform plus the boiling point elevation:

63.2 ºC = 61.2 ºC + ΔTb

ΔTb = 2.0 ºC

Now we can use the equation to calculate the molality:

molality = ΔTb / Kb

molality = 2.0 ºC / 3.63 ºC/m

molality = 0.55 m

Learn more about Molarity from the given link

https://brainly.com/question/14469428

#SPJ1

Answer:   12.55 C

Explanation:

The relationship between gas volume and temperature is described by the Ideal Gas Law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.

P1V1 = nRT1 (initial conditions)

P2V2 = nRT2 (final conditions)

Since the number of moles is constant, we can set nRT1 equal to nRT2:

P1V1 = P2V2

We can rearrange this equation to solve for the final temperature:

T2 = (P1V1/T1) * V2/P2

Substituting the given values:

T2 = (1 atm * 0.675 L / 308.15 K) * (0.635 L / 1 atm)

where we converted the initial temperature of 35 C to Kelvin by adding 273.15 K.

Simplifying and solving for T2:

T2 = 285.7 K - 273.15 K

T2 = 12.55 C

Therefore, the temperature of the room where the gas has a volume of 0.635 L at 1 atm is approximately 12.55 C.

a. Balanced chemical reaction: 4Li + O₂ → 2Li₂O

b. Balanced Chemical reaction: Mg(ClO₃)₂→ MgCl₂ + 3O₂

c. Balanced Chemical reaction: 2HNO₃ + Ca(OH)₂ → Ca(NO₃)₂ + 2H₂O

d. Balanced Chemical reaction: C₅H₁₂+ 8O₂→ 5CO₂ + 6H₂O

Lets understand these reaction types:

1. Synthesis: Chemical synthesis is the process in which chemical reactions are performed with the idea of converting a reactant into a product or multiple products.

For example: 4Li + O₂ → 2Li₂O

2. Decomposition: In these reactions chemical species break up into simpler parts.

For example: Mg(ClO₃)₂→ MgCl₂ + 3O₂

3. Double displacement: is a type of chemical reaction where two compounds react, and positive ions and the negative ions of the two reactants switch places, forming two new compounds or products.

For example:  2HNO₃ + Ca(OH)₂ → Ca(NO₃)₂ + 2H₂O

4. Combustion: These reactions occur when oxygen reacts with another substance and gives off heat and light.

For example: C₅H₁₂+ 8O₂→ 5CO₂ + 6H₂O

For more question on chemical reaction click on

https://brainly.com/question/11231920

#SPJ11

Correct form of question

For each of the following reactions, identify the missing reactant(s) or products(s) and then balance the resulting equation. Note that each empty slot may require one or more substances.

a. synthesis: ___ ⟶Li2O

b. decomposition: Mg(ClO3)2⟶___,

c. double displacement: HNO3+Ca(OH)2→___,

d. combustion: C5H12+O2⟶___

5 to 10 ml urine should be collected for clean-catch procedure. Thus Option A is the correct answer.

In the clean-catch procedure, 5 to 10 ml is adequate amount of urine because more than this quantity will cause a difficulty in sampling the solution. For this process to work there is a set of criteria that needs to be followed to ensure that the given sample is tested with readiness with accuracy.

The given criteria are the sample must be stored away in an compact space, the sample must be free from any impurities, the sample must be fresh for the process to run smoothly. Furthermore, this set of process is crucial for finding the cause of the disease that are caused by bacteria.

This type of process is adequate for all age groups ranging from infants to adults.

To learn more about Clean-catch procedure,

https://brainly.com/question/26493943

#SPJ4

Answer:

Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons.

The organic molecule CH2OCH2CHOH is a diol, which means it contains two hydroxyl (-OH) groups. It is also known as ethylene glycol, and it has the molecular formula C2H6O2.

Ethylene glycol is a colorless, odorless, and sweet-tasting liquid that is commonly used as a solvent, antifreeze, and in the production of polyester fibers and resins.

It is also highly toxic if ingested, as it can cause kidney failure and other serious health problems.

Therefore, it is important to handle ethylene glycol with care and follow proper safety precautions when using it in laboratory or industrial settings.

To know more about ethylene glycol, visit:

https://brainly.com/question/10405060

#SPJ1

Plug in the values of pKa, C₁, and C₂_new into the equation to find the pH of the resulting buffer solution.

To determine the pH of the resulting buffer solution, we need to first identify the acid and its conjugate base present in the mixture. Since the exact substances are not provided in the student question, I will use a generic example of a weak acid (HA) and its conjugate base (A-).
Let's assume that we have V₁ volume of HA with a concentration of C₁ and V₂ volume of A- with a concentration of C₂.
Step 1: Calculate the total volume of the buffer solution.
V_total = V₁ + V₂
Step 2: Calculate the moles of HA and A- in the mixture.
moles_HA = C₁ * V₁
moles_A- = C₂ * V₂
Step 3: Calculate the new concentrations of HA and A- in the buffer solution.
C₁_new = moles_HA / V_total
C₂_new = moles_A- / V_total
Step 4: Use the Henderson-Hasselbalch equation to determine the pH of the buffer solution.
pH = pKa + log ([A-] / [HA])
Here, pKa is the acid dissociation constant of HA, [A-] represents the concentration of A- (C₂_new), and [HA] represents the concentration of HA (C₁_new).

For more such questions on buffer solutions.

brainly.com/question/8676275

#SPJ11

To calculate the pH of the resulting solution, we need to first determine the moles of HNO2 and RbOH that are present in each solution.

Moles of HNO2 = volume (in liters) x concentration

Moles of HNO2 = 0.162 L x 1.860 mol/L

Moles of HNO2 = 0.30372 mol

Moles of RbOH = volume (in liters) x concentration

Moles of RbOH = 0.121 L x 1.090 mol/L

Moles of RbOH = 0.13169 mol

Since HNO2 is a weak acid and RbOH is a strong base, they will undergo a neutralization reaction to form a salt (RbNO2) and water. The balanced chemical equation for this reaction is:

HNO2 + RbOH → RbNO2 + H2O

To determine the amount of HNO2 and RbOH that react with each other, we need to use the stoichiometry of the reaction. Since the reaction is a 1:1 ratio between HNO2 and RbOH, we can say that the amount of HNO2 that reacts is equal to the amount of RbOH added. Therefore, the remaining amount of HNO2 and RbOH that are not used in the reaction can be calculated as follows:

Moles of HNO2 remaining = 0.30372 mol - 0.13169 mol = 0.17203 mol

Moles of RbOH remaining = 0.13169 mol - 0.13169 mol = 0 mol

The 0.13169 mol of RbOH reacts with 0.13169 mol of HNO2 to form 0.13169 mol of RbNO2 and 0.13169 mol of H2O.

Now we need to determine the concentration of HNO2 and RbNO2 in the resulting solution.

Concentration of HNO2 = moles remaining / total volume

Concentration of HNO2 = 0.17203 mol / (0.162 L + 0.121 L)

Concentration of HNO2 = 1.048 M

Concentration of RbNO2 = moles of RbNO2 / total volume

Concentration of RbNO2 = 0.13169 mol / (0.162 L + 0.121 L)

Concentration of RbNO2 = 0.805 M

Finally, we can use the acid dissociation constant (Ka) of HNO2 to calculate the pH of the resulting solution.

Ka = [H+][NO2-] / [HNO2]

5.62 x 10^-4 = [H+]^2 / 1.048

[H+] = 0.00749 M

pH = -log[H+]

pH = -log(0.00749)

pH = 2.13

Therefore, the pH of the resulting solution is approximately 2.13.

To know more about pH of the solutions, visit the link given below:

https://brainly.com/question/11936640

#SPJ4

(complete question)

Determine The PH Of The Solution Resulting From Mixing A Solution Of 162 ML Of HNO2 (K, = 5.62e - 04) At A 1.860 M concentration, with 121mL of a 1.090M solution of RbOH?

To produce 100 cm3 of hydrogen gas at 298 K and 100 kPa, we need 49.5 mg of magnesium and 2.04 cm3 of 2.0 mol/dm3 hydrochloric acid.

What is HCl?

HCl is the chemical formula for hydrochloric acid, which is a strong, highly corrosive acid that is commonly used in industrial and laboratory applications. It is a colorless, pungent gas that dissolves readily in water to form hydrochloric acid, which is a clear, colorless solution with a strong, acidic taste and a pungent odor.

The balanced chemical equation for the reaction is:

Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)

From the equation, we know that 1 mole of magnesium reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas. Therefore, we need to determine how many moles of hydrogen gas are produced by the given volume and conditions.

Using the ideal gas law equation:

PV = nRT

where P = pressure, V = volume, n = number of moles, R = the gas constant, and T = temperature, we can calculate the number of moles of hydrogen gas produced:

n = PV/RT

where P = 100 kPa, V = 100 cm3 or 0.1 dm3, R = 8.31 J/mol·K (gas constant), and T = 298 K

n = (100 kPa x 0.1 dm3) / (8.31 J/mol·K x 298 K) = 0.00408 moles of H2

According to the balanced chemical equation, 1 mole of magnesium reacts with 1/2 mole of hydrogen gas. Therefore, we need 0.00204 moles of magnesium to produce 0.00408 moles of hydrogen gas.

The molar mass of magnesium is 24.31 g/mol, so the mass of magnesium required is:

mass of Mg = 0.00204 mol x 24.31 g/mol = 0.0495 g or 49.5 mg

The concentration of hydrochloric acid is given as 2.0 mol/dm3. Therefore, we can calculate the number of moles of hydrochloric acid required using the equation:

moles of HCl = concentration x volume

where the volume is in dm3.

moles of HCl = 2.0 mol/dm3 x 0.1 dm3 = 0.2 moles of HCl

According to the balanced chemical equation, 1 mole of magnesium reacts with 2 moles of hydrochloric acid. Therefore, we need half the number of moles of hydrochloric acid as magnesium, which is:

moles of HCl needed = 0.00204 mol x 2 = 0.00408 moles of HCl

Finally, we can calculate the volume of 2.0 mol/dm3 hydrochloric acid needed using the equation:

volume = moles / concentration

volume = 0.00408 moles / 2.0 mol/dm3 = 0.00204 dm3 or 2.04 cm3

Learn more about HCl from the given link

https://brainly.com/question/27576431

#SPJ1

First, we'll look at the ideal gas equation,

PV = nRT

The temperature and pressure are said to be constant; Additionally, R is a constant already. Along these lines, we get:

V = constant * n

The direct proportional equation is as follows: As a result, we get:

V/n = constant

V₁/n₁ = V₂/n₂

Replace V₂ with the qualities and address.

V₂ = (4 * 1.48) / 0.864

V₂ = 6.85

In the end, 6.85 Liters of gas must be present, so we must add:

6.85 - 4 = 2.85 liters

The volume of a gas is directly proportional to its mole volume at a fixed temperature and pressure.

To learn more about ideal gas here

https://brainly.com/question/28257995

#SPJ4

Q- At 4.00 L, an expandable vessel contains 0.864 mol of oxygen gas. How many liters of oxygen gas must be added at constant temperature and pressure if you need a total of 1.48mol of oxygen gas in the vessel?

Identify the unidentified substance using densities of a known substances. Unknown material density Using mass and volume data, identify an unidentified substance and calculate it density: P = 8.6 g/cm3.

Since water served as the foundation for creating the metric system of measurement, density is defined as mass divided in volume (=m/v), meaning that one cubic centimetre (1cm3) if water weighs one gramme (1g). As a result, the density of water is simple to remember: 1g/1cm3 = 1 g/cm3.

Pour water into the a graduated cylinder, measure the volume, submerge the object, and measure the volume again. Its volume of a object is the distinction between both volume measurements. To determine the object's density, just divide its mass by the volume.

To know more about mass visit:

https://brainly.com/question/15959704

#SPJ1

The molarity of the sample of HNO3 (aq.) is neutralized by 22.1 milliliters of 0.250 m KOH(aq.) is 0.193M

Molarity is also called as molar concentration. Molarity can be defined as the measure of the concentration of a chemical specie of the reaction in particular of a solute in a solution which is in terms of amount of substance per unit volume of solution.

The molarity can be calculated as,

M1 V1 = M2 V2

Hehe, M1 is the molarity of the acid and V1 is the volume  of the an acid. M2 is the molarity of the base and V2 is the volume of the base of the solution.

When 35.0-milliliter sample of HNO3 (aq.) is neutralized by 22.1 milliliters of 0.250 m KOH(aq.)

Putting all the values in the expression we get,

M1=M2V2/V1

    =(0.150) (32.1)/25.0

    = 0.193M

To learn more about Molarity

https://brainly.com/question/30404105

#SPJ4