If an atom loses an electron, what will its resulting charge be?

The surface area of the rectangular prism is 0.034 square meters.

For a rectangular prism with length l, width w, and height h, the surface area is:

Surface area = 2lw + 2lh + 2wh

Substituting the given values, we get:

Surface area = 2(10 cm x 5 cm) + 2(10 cm x 8 cm) + 2(5 cm x 8 cm)

Surface area = 100 cm² + 160 cm² + 80 cm² = 340 cm²

We can use dimensional analysis. So the conversion factor is:

1 m² / 10,000 cm²

Multiplying the surface area by this conversion factor, we get:

Surface area = 340 cm² x (1 m² / 10,000 cm²)

Surface area = 0.034 m²

To know more about rectangular prism, here

brainly.com/question/21308574

#SPJ1

--The complete Question is, What is the surface area of a rectangular prism that has a length of 10 cm, a width of 5 cm, and a height of 8 cm? Use dimensional analysis to convert the answer to square meters--

Answer:

D

Explanation:

The special property of water is that it is able to be cohesive and adhesive due to their hydrogen bonds

To find the solution concentration, you need to know the amount of solute and the volume of the solution.

The solution concentration is typically expressed in terms of molarity (moles of solute per liter of solution). To calculate the molarity of a solution, divide the moles of solute by the volume of the solution in liters.

Another way to express solution concentration is in terms of percent by mass or volume, which is calculated by dividing the mass or volume of the solute by the mass or volume of the solution and multiplying by 100.

To find the solution concentration, you'll need to calculate the ratio of solute (substance being dissolved) to solvent (substance doing the dissolving) in the mixture.

Concentration is commonly expressed in units like molarity (M), mass/volume percent, or parts per million (ppm).

To calculate molarity (M), divide the moles of solute by the volume of the solvent (in liters). The formula is:

Molarity (M) = moles of solute / volume of solvent (L)

For mass/volume percent, divide the mass of the solute by the total volume of the solution and multiply by 100. The formula is:

Mass/volume percent = (mass of solute / total volume of solution) x 100

For parts per million (ppm), divide the mass of the solute by the total mass of the solution and multiply by 1,000,000.

The formula is:
ppm = (mass of solute / total mass of solution) x 1,000,000
Choose the appropriate formula based on the units required for your specific problem.

For more question on solution concentration

https://brainly.com/question/26255204

#SPJ11

Oil soap and water are  sustainable because they are both natural and biodegradable.

Oil soap is a cleaning product that is made from natural materials, such as vegetable oils and potassium hydroxide.

One of the main ways in which oil soap and water can be considered sustainable is that they are both natural and biodegradable.

In addition, using oil soap and water to clean wooden surfaces can help to prolong their lifespan, reducing the need for frequent replacements and minimizing waste.

Regular maintenance with oil soap can help to prevent dirt and grime buildup that can cause damage to wooden surfaces.

Learn more about oil soap here: https://brainly.com/question/16375181

#SPJ1

We can use the combined gas law to solve this problem:

(P1V1/T1) = (P2V2/T2)

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We are given that the initial pressure is P1 = 837 mm Hg and the initial volume is V1 = 1.5 × 10^7 L. The initial temperature is T1 = 18.4°C, which we need to convert to Kelvin by adding 273.15:

T1 = 18.4°C + 273.15 = 291.55 K

We are also given that the final pressure is P2 = 707 mm Hg and the final temperature is T2 = -31°C, which we need to convert to Kelvin:

T2 = -31°C + 273.15 = 242.15 K

Now we can solve for the final volume, V2:

(P1V1/T1) = (P2V2/T2)

V2 = (P1V1T2) / (P2T1)

V2 = (837 mm Hg * 1.5 × 10^7 L * 242.15 K) / (707 mm Hg * 291.55 K)

V2 = 5.26 × 10^6 L

Therefore, the volume occupied by the helium gas at the higher altitude is 5.26 × 10^6 L.

25.0 g of CaCO3 will produce 11.0 g of CO2. Mass is an intrinsic property of an object, meaning it does not depend on the object's location or the presence of other objects.

What is Mass?

Mass is a measure of the amount of matter in an object. It is a scalar quantity and is typically measured in units such as grams (g) or kilograms (kg). Mass is not the same as weight, which is a measure of the force exerted on an object due to gravity.

The balanced chemical equation for the decomposition of calcium carbonate (CaCO3) is:

CaCO3 → CaO + CO2

According to the equation, 1 mole of CaCO3 produces 1 mole of CO2. The molar mass of CaCO3 is 100.09 g/mol, which means that 1 mole of CaCO3 has a mass of 100.09 g.

To calculate the mass of CO2 produced from 25.0 g of CaCO3, we first need to convert the mass of CaCO3 to moles:

25.0 g CaCO3 x (1 mol CaCO3/100.09 g CaCO3) = 0.2498 mol CaCO3

Since 1 mole of CaCO3 produces 1 mole of CO2, we know that 0.2498 mol of CaCO3 will produce 0.2498 mol of CO2.

To convert the moles of CO2 to mass, we can use the molar mass of CO2, which is 44.01 g/mol:

0.2498 mol CO2 x 44.01 g/mol = 11.0 g CO2

Learn more about Mass from the given link

https://brainly.com/question/86444

#SPJ9

We see here that the article is actually talking about: B. Dr. Dituri's Project Neptune 100.

A piece of writing known as an article is typically printed in a newspaper, magazine, or journal. It may address a variety of subjects, such as news, features, essays, research findings, and reviews.

We can see here that in the article, being referred to in the question is known as "A Chat With the Scientist Living Underwater for 100 Days,".

From the article, it is very clear that it refers to Dr. Dituri's Project Neptune 100. Retired Navy officer, Joseph Dituri is seeking to break the current record for longest period of time spent submerged.

Note: I can't post the article here. But I have provided the title of the article above.

Learn more about article on https://brainly.com/question/26859358

#SPJ1

The complete table for the phase changes would be as follows:

Phase changes occur when a substance changes from one phase to another. When a significant amount of energy is gained or lost, this process takes place.

Phase change also depends on elements like pressure and temperature.

There are six ways a substance can change between these three phases; melting, freezing, evaporating, condensing, sublimation, and deposition.

Learn more about phase changes at: https://brainly.com/question/25664350

#SPJ1

First, we need to write out the balanced chemical equation for the reaction: 4 KO2 + 2 CO2 → 2 K2CO3 + 3 O2

From the equation, we can see that 4 moles of KO2 react with 2 moles of CO2 to produce 3 moles of O2. Therefore, we need to convert the given masses of KO2 and CO2 into moles:

moles of KO2 = 2.61 g / molar mass of KO2 = 2.61 g / 71.10 g/mol = 0.0367 mol
moles of CO2 = 4.46 g / molar mass of CO2 = 4.46 g / 44.01 g/mol = 0.1013 mol

Next, we need to determine the limiting reagent (the reactant that will be completely consumed in the reaction) by comparing the mole ratios of KO2 and CO2 in the balanced equation. The ratio of moles of KO2 to moles of CO2 is:
0.0367 mol KO2 / 4 mol KO2 per 2 mol CO2 = 0.0184 mol CO2

Since this ratio is less than the actual number of moles of CO2 we have (0.1013 mol), CO2 is in excess and KO2 is the limiting reagent.

Using the mole ratio from the balanced equation, we can calculate the number of moles of O2 produced:

moles of O2 = 3 mol O2 per 4 mol KO2 × 0.0367 mol KO2 = 0.0275 mol O2

Finally, we can convert the moles of O2 to grams:

mass of O2 = moles of O2 × molar mass of O2 = 0.0275 mol × 32.00 g/mol = 0.88 g
Therefore, 2.61 g of KO2 and 4.46 g of CO2 would produce 0.88 g of O2.

For more questions on: chemical

https://brainly.com/question/29886197

#SPJ11

Answer: Ba + Co(CN)₃ → Ba(CN)₂ + Co₂O₃

Explanation:

Barium reacts with cobalt (III) cyanide to produce barium cyanide and cobalt (III) oxide according to the following chemical equation:

Ba + Co(CN)₃ → Ba(CN)₂ + Co₂O₃

It is a type of displacement reaction.

a. Br  will have the negative charge

b. The effective charges on the I and Br atoms are approximately +1.012e and -1.012e, respectively.

a. To identify which atom within an IBr molecule will have a partial negative charge, we must consider each atom's electronegativity.

On the periodic table, iodine (I) has an electronegativity value of 2.66 while bromine (Br) boasts 2.96; since Br has higher electronegativity it will attract electrons more strongly and hence have an even stronger partial negative charge.

B. To calculate the effective charges on the I and Br atoms in IBr, we can use the dipole moment equation:

μ = Q * d

where μ is the dipole moment, Q is the effective charge, and d is the bond length.

We are given the dipole moment (μ) as 1.21 D, and the bond length (d) as 249 pm. However, we need to convert the units to the SI system before proceeding with the calculation.

[tex]1 D (Debye) = 3.336 * 10^-^3^0 cm,\\\\1 pm = 10^-^1^2 m.[/tex]

Now we can solve for the effective charge (Q):[tex]u = 1.21 D * (3.336 × 10^-^3^0 Cm/D)\\ \\= 4.03656 * 10^-^3^0 cm\\d = 249 pm * (10^-12 m/pm) = 2.49 * 10^-^1^0 m[/tex]

Q = μ / d

[tex]Q = (4.03656 * 10^-^3^0 cm) / (2.49 *10^-^1^0 m) \\\\\\=1.62151 * 10^-^2^0 C[/tex]

This effective charge represents the charge difference between the I and Br atoms. To express the charges in units of the elementary charge (e), we need to divide the effective charge by the elementary charge value (e = 1.602 × 10^-19 C):

Q_e =[tex]\frac{(1.62151 * 10^-^2^0 C)}{(1.602 * 10^-^1^9 C)} = 1.012[/tex]

The effective charges on the I and Br atoms are approximately +1.012e and -1.012e, respectively.

Read more on effective charges here: https://brainly.com/question/30459409

#SPJ1

Answer: 4 moles i think this is right im not sure

The ratio of the concentrations at equilibrium is as follows:

Chemical equilibrium is the point in a chemical reaction where both the forward and backward processes are occurring at the same rate.

The concentrations of the reactants and products are constant at equilibrium because the forward and reverse speeds are equal.

Considering the given statements based on the reaction equilibrium concentrations, the correct options are:

Learn more about reactions in equilibrium at: https://brainly.com/question/18849238

#SPJ1

The root mean squared velocity of molecules is 461.15 m/s

The root-mean square (RMS) velocity is the value of the square root of the sum of the squares of the stacking velocity values divided by the number of values.

The root-mean-square speed addresses both molecular weight and temperature, two parameters that have a direct influence on a material’s kinetic energy. The Maxwell-Boltzmann equation, which is the foundation of gas kinetic theory, defines the speed distribution for gas at a specific temperature.

Given,

Pressure = 1 atm = 101300 Pa

Density = 1.4290 kg/m³

c = [tex]\sqrt{\frac{3P}{d} }[/tex]

c = [tex]\sqrt{\frac{303900}{1.4290} }[/tex]

c = 461.15 m/s

Learn more about Root mean square velocity, here:

https://brainly.com/question/13751940

#SPJ1

Answer:

[tex]\huge\boxed{\sf Q = 1105.65\ cal}[/tex]

Explanation:

Mass = m = 450 g

T₁ = 19.5 °C

T₂ = 31.2 °C

Change in Temperature = ΔT = 31.2 - 19.5 = 11.7 °C

c = 0.21 cal/g °C

Heat = Q = ?

Q = mcΔT

Put the given data in the above formula.

Q = (450)(0.21)(11.7)

Q = 1105.65 cal

[tex]\rule[225]{225}{2}[/tex]

According to the law of conservation of mass, the mass of the reactant must be equal to the mass of the product, hence the reaction is wrong

The law of conservation of mass states that mass within a closed system remains the same over time.

It states that the mass in an isolated system can neither be created nor be destroyed but can be transformed from one form to another.

Thus,  the mass of the reactants must be equal to the mass of the products for a low energy thermodynamic process.

From the information given, we have the reaction written as;

HCI + NaOH → NaCl

The mass of the reactant Hydrogen(H) is not found on the product

The mass of the reactant(Oxygen) is also not found

Learn more about law of conservation of mass at: https://brainly.com/question/15289631

#SPJ1

Answer:

Glyceraldehyde is a simple sugar with three carbon atoms attached to hydroxyl and hydrogen or carbonyl groups. The first carbon atom has four different groups, including an aldehyde group, which makes it asymmetric. This results in two stereoisomers, D-glyceraldehyde and L-glyceraldehyde, that are mirror images of each other and have opposite optical activities.

(a) To calculate the mass of sulfuric acid in the truck, we can multiply the volume of sulfuric acid by its density. Given that the truck carries 34,000 liters of sulfuric acid and the density of sulfuric acid is 1.84 kg/L.

we can use the formula:

Mass (m) = Volume (V) × Density (D)

Plugging in the given values:

Volume (V) = 34,000 L Density (D) = 1.84 kg/L

m = 34,000 L × 1.84 kg/L

m ≈ 62,560 kg (rounded to the nearest whole number)

Therefore, the mass of sulfuric acid in the truck is approximately 62,560 kg.

(b) The amount of sulfuric acid in the truck is already given in the question as 34,000 L (volume).

For more questions on: volume

https://brainly.com/question/27100414

#SPJ11

(a) To find the mass of sulfuric acid in the truck, we need to use the formula:
mass = density x volume

The volume of sulfuric acid in the truck is given as 34,000 L. The density of sulfuric acid is 1.84 kg/L. Therefore, the mass of sulfuric acid in the truck is:

mass = 1.84 kg/L x 34,000 L = 62,560 kg
So there are 62,560 kg of sulfuric acid in the truck.
(b) To find the amount of sulfuric acid in the truck, we need to use the formula:
amount = mass / molar mass
The molar mass of sulfuric acid is 98.08 g/mol. To convert the mass from kg to g, we need to multiply by 1000. Therefore, the amount of sulfuric acid in the truck is:
amount = 62,560,000 g / 98.08 g/mol = 636,816.3 mol
So there are 636,816.3 moles of sulfuric acid in the truck.

For more question on  sulfuric acid

https://brainly.com/question/10220770

#SPJ11

We can use the formula:

Q = mcΔT

where Q is the heat absorbed or released, m is the mass, c is the specific heat, and ΔT is the change in temperature.

First, let's calculate the heat absorbed by the crown:

Q1 = mcΔT

Q1 = (1130 g)(0.129 J/g C)(98.8 C - 25.83 C)

Q1 = 107,776.6 J

Next, let's calculate the heat released by the crown into the water:

Q2 = mcΔT

Q2 = (m)(c)(ΔT)

Q2 = (1340 g)(4.184 J/g C)(27.84 C - 25.83 C)

Q2 = 11096.64 J

Since Q1 = -Q2 (heat lost by the crown is equal to heat gained by the water),

mcΔT = -mcΔT

We can then solve for the specific heat of the crown:

c = -(Q2/mΔT)

c = -(11096.64 J)/(1130 g)(27.84 C - 25.83 C)

c = 0.131 J/g C

The specific heat of pure gold is 0.129 J/g C, and the specific heat of the crown is 0.131 J/g C. Since the specific heat of the crown is slightly higher than that of pure gold, it is possible that the crown is not pure gold. However, other factors such as impurities or alloying metals can also affect the specific heat, so further analysis would be necessary to confirm if the crown is pure gold.

The second-law efficiency of this freezer is 94.7%.

The second-law efficiency of a refrigerator or freezer is described as as the ratio of the desired cooling effect  which is the heat removed from the cold reservoir) to the energy input required to achieve this cooling effect.

The second-law efficiency of a refrigerator  formula is

η = Qc / W

we have the equation as

Qh = mCΔT = Qc

Tc = -7°C = 266 K

Th = 25°C = 298 K  and

W = Qh / (1 - Tc/Th) = Qc / (1 - Tc/Th) = 3.3 W

we have found  Qc = 3.125

W  = 3.3 W

we then substitute into the  second-law efficiency formula:

η = Qc / Wmin

η= 3.125 W / 3.3 W

η= 0.947 or 94.7%

Learn more about second-law efficiency at:

https://brainly.com/question/15025185

#SPJ1

The main difference between practical work inside and outside a laboratory is the environment and tools used for experimentation.

Inside a laboratory, experiments are conducted in a controlled environment with specialized equipment and instruments designed to facilitate experimentation, record data, and ensure safety.

On the other hand, outside the laboratory, experiments are often conducted in a less controlled environment, which can make it more challenging to control variables and obtain accurate results.

Also, experiments outside the laboratory often require different tools and techniques to account for environmental factors such as weather conditions. However, outside the laboratory, there is often more opportunity for real-world applications of experimental findings.

More on practical laboratory works can be found here: https://brainly.com/question/27748008

#SPJ1

When 28.2 grams of Mg is burned, 46.7 grams of MgO will be formed.

The balanced chemical equation for the combustion of magnesium is:

2 Mg + O2 --> 2 MgO

This equation shows that 2 moles of Mg react with 1 mole of O2 to produce 2 moles of MgO.

To determine the amount of MgO formed when 28.2 grams of Mg is burned, we first need to convert the given mass of Mg to moles:

molar mass of Mg = 24.31 g/mol

moles of Mg = mass of Mg / molar mass of Mg

moles of Mg = 28.2 g / 24.31 g/mol

moles of Mg = 1.16 mol

According to the balanced chemical equation, 2 moles of Mg produce 2 moles of MgO. Therefore, we can use the mole ratio to calculate the moles of MgO formed:

moles of MgO = moles of Mg x (2 moles of MgO / 2 moles of Mg)

moles of MgO = 1.16 mol x 1

moles of MgO = 1.16 mol

Finally, we can convert the moles of MgO to grams using its molar mass:

molar mass of MgO = 40.31 g/mol

mass of MgO = moles of MgO x molar mass of MgO

mass of MgO = 1.16 mol x 40.31 g/mol

mass of MgO = 46.7 g

Therefore, when 28.2 grams of Mg is burned, 46.7 grams of MgO will be formed.

Learn more about moles here : brainly.com/question/14357742

#SPJ1

Answer:

1.8mol

Explanation:

this is the ans but in the option there is

not give

1) Bromination of propylene to form 2-bromopropane using NBS and a Lewis acid catalyst.

Bromination is a chemical process in which bromine is added to a molecule. This can be done by either direct substitution or as a substitution reaction, allowing for the addition of one or more bromine atoms to the molecule. Bromination is a commonly used organic reaction, particularly in the laboratory, and can be used to alter the properties of a compound. It can also be used to produce a wide range of products, including aromatics and halogenated compounds. Bromination is particularly useful in pharmaceutical synthesis, as the products of this reaction often have desirable bioactivity.

2) Reduction of 2-bromopropane to 2-propanol using NaBH₄
3) Reaction of 2-propanol with phosphorus tribromide to form 2-bromopropanol
4) Alkylation of 2-bromopropanol with methyl iodide to form 2-bromopropyl methyl ether
5) Reduction of 2-bromopropyl methyl ether to 2-methoxypropane using NaBH₄
6) Reaction of 2-methoxypropane with phosphorus tribromide to form 2-bromo-2-methoxypropane
7) Reduction of 2-bromo-2-methoxypropane to Compound X using NaBH₄

To learn more about Bromination
https://brainly.com/question/24202507
#SPJ1

Sure, I can explain the four types of nuclear decay and provide a model for each using Si-32 as an example.

Si-32 is a radioactive isotope of Silicon with 14 protons and 18 neutrons.

1. Alpha Decay:

In alpha decay, an unstable nucleus emits an alpha particle, which consists of two protons and two neutrons, reducing the atomic number by two and the mass number by four. This makes the resulting nucleus a different element.

Model: Si-32 → alpha particle + Mg-28

Explanation: Si-32 decays into an alpha particle (two protons and two neutrons) and becomes Mg-28.

2. Beta Decay:

In beta decay, a neutron is converted into a proton and an electron. The proton stays in the nucleus, and the electron is emitted as a beta particle. This increases the atomic number by one while keeping the mass number the same.

Model: Si-32 → beta particle + P-32

Explanation: Si-32 decays into a beta particle (an electron) and becomes P-32.

3. Gamma Decay:

Gamma decay occurs when an unstable nucleus emits high-energy photons called gamma rays. Unlike alpha and beta decay, gamma decay does not change the atomic number or mass number of the nucleus.

Model: Si-32 → Si-32 + gamma ray

Explanation: Si-32 emits a gamma ray but remains Si-32.

4. Electron Capture:

In electron capture, an unstable nucleus absorbs an electron from an inner shell, converting a proton into a neutron. This reduces the atomic number by one while keeping the mass number the same.

Model: Si-32 + electron → Al-32

Explanation: Si-32 captures an electron and becomes Al-32.

These four types of nuclear decay can occur in radioactive isotopes, and they result in a change in the atomic number and/or mass number of the nucleus.

The correct answer is D. to have eight electrons in their valence shells.

A covalent bond is a chemical relationship that requires the sharing of electrons between atoms to generate electron pairs. These electron couples are known as bonding pairs or sharing pairs.

Covalent bonding is the steady balance of attractive and repulsive forces between atoms when they share electrons.

Covalent Bond Types

Learn more about Covalent Bond  here:

https://brainly.com/question/3447218

#SPJ1