If a person consumes 5. 33 × 105 kcal in a day and one barrel of oil can produce 3. 70 × 106 kcal, what is the equivalent of energy consumed per year by that person in terms of barrels of oil?

Solubility is the ability of a substance to dissolve in a liquid to form a solution. It is an important physical property of substances that must be taken into account.

Substance is a term used to refer to a material that has mass and occupies space. It is something that has physical properties that can be identified and measured. Substance can be either a solid, liquid, gas, or plasma. Examples of substances include solids such as iron, liquids like water, gases like oxygen, and plasma like fire.

Solubility is the ability of a substance to dissolve in a liquid to form a solution. It is an important physical property of substances that must be taken into account when studying topics such as solute-solvent interactions, chemical reactions, and phase changes. In this lab, we will be exploring the solubility of various substances, including sugar, salt, and baking soda, to determine how their solubility is affected by changes in temperature. To begin, we will measure out one gram of each substance into separate test tubes and dissolve them in 10mL of water. We will then place each test tube into a beaker of hot (90°C) and cold (0°C) water and observe the differences in solubility. We will use a thermometer to measure the temperatures of each beaker and record the results. Next, we will measure out two grams of each substance and repeat the same procedure as before. We will then measure out five grams of each substance and repeat the experiments. We will record our observations and results for each experiment.

To learn more about substance

https://brainly.com/question/29108029

#SPJ4

Gay-Lussac's Laws, also known as the Pressure-Temperature Law and Volume-Temperature Law, are a set of gas laws that explain the relationship between pressure, volume, and temperature in a given gas sample.

According to Gay-Lussac's Laws, if the pressure of a gas is increased while the volume remains constant, the temperature of the gas will also increase. Similarly, if the volume of a gas is decreased while the pressure remains constant, the temperature of the gas will increase as well.

In terms of a concept map, Gay-Lussac's Laws can be placed in the center with arrows pointing to both Boyle's Law and Charles's Law, which are two other gas laws that are also related to pressure, volume, and temperature.

Boyle's Law states that the pressure of a gas is inversely proportional to its volume, while Charles's Law states that the volume of a gas is directly proportional to its temperature.

To connect these three gas laws, the arrows can be labeled with key terms such as "pressure," "volume," and "temperature," with each gas law demonstrating how changes in one variable will affect the others.

The concept map can also include real-world examples of each gas law, such as how a tire pressure gauge can be used to demonstrate Boyle's Law, or how a hot air balloon can be used to demonstrate Charles's Law.

To know more about Gay-Lussac's Laws, visit:

https://brainly.com/question/2683502#

#SPJ11

The name of this compound using IUPAC rules is  3,4-dimethylhexane.

Option D is correct.

the IUPAC nomenclature of organic chemistry is described as a method of naming organic chemical compounds as recommended by the International Union of Pure and Applied Chemistry.

Option A, 2,3-diethylbutane, is incorrect because it has a different carbon chain length and different substituent positions.

Option B, 2-ethyl-3-methylpentane, is incorrect because it has a different carbon chain length and one of the substituents is incorrectly placed.

Option C, 3-methyl-4-ethylpentane, is incorrect because it has a different carbon chain length and the substituent positions are reversed.

Learn more about  IUPAC rules at: https://brainly.com/question/28872356

#SPJ1

Aspartic acid (Asp) and glutamic acid (Glu) are the two amino acids that are regarded as acidic amino acids. These amino acids are acidic due to the Carboxylic acid group (-COOH) in their side chains, which has the ability to donate a hydrogen ion (H+) to the environment.

The three amino acids lysine (Lys), arginine (Arg), and histidine (His), on the other hand, are regarded as basic amino acids. These amino acids are classified as basic because they include basic amine groups (-NH2) in their side chains that can accept a hydrogen ion (H+) from the environment. It is significant to remember that amino acids can become more basic or acidic depending on the pH of the surroundings.

To know more about Carboxylic acid group, here

brainly.com/question/31608774

#SPJ1

Aspartic acid (Asp) and glutamic acid (Glu) are acidic amino acids. Lysine (Lys), arginine (Arg), and histidine (His) are basic amino acids under physiological conditions.

The two amino acids commonly referred to as acidic amino acids are aspartic acid (Asp) and glutamic acid (Glu). They are called acidic amino acids because their side chains can ionize and release a proton, resulting in a negatively charged carboxylate group. The ionization occurs under physiological conditions when the pH is higher than the pKa value of the side chain.

The three amino acids commonly referred to as basic amino acids are lysine (Lys), arginine (Arg), and histidine (His). They are called basic amino acids because their side chains can accept a proton, resulting in a positively charged amino group. The ionization occurs under physiological conditions when the pH is lower than the pKa value of the amino group.

It's important to note that the ionization and charges of amino acids depend on the specific pH and pKa values of their side chains. The mentioned ionization states are commonly observed under physiological conditions, where the pH is around 7. However, at different pH values, the ionization states may vary.

Learn more about Ionization at

brainly.com/question/1602374

#SPJ4

In redox reactions, electrons are transferred from one species to another. If the response is spontaneous, strength is released, that could then be used to do beneficial work.

To harness this strength, the response have to be break up into separate 1/2 of reactions: the oxidation and reduction reactions. The reactions are placed into one of a kind bins and a twine is used to pressure the electrons from one aspect to the other. In doing so, a Voltaic/ Galvanic Cell is created. An electrode is strip of metallic on which the response takes region. In a voltaic cell, the oxidation and discount of metals takes place on the electrodes. There are electrodes in a voltaic cell, one in every 1/2 of-cell. The cathode is wherein discount takes region and oxidation takes region on the anode. Through electrochemistry, those reactions are reacting upon metallic surfaces, or electrodes. An oxidation-discount equilibrium is mounted among the metallic and the materials in solution. When electrodes are immersed in an answer containing ions of the equal metallic, it's far referred to as a 1/2 of-cell.

To learn more about redox reaction check the link below-

https://brainly.com/question/21851295

#SPJ4

In a reaction mechanism, the rate-determining step is the slowest step with the highest activation energy. The correct answer is option c.

This is because the rate of the overall reaction is determined by the speed of the slowest step, as it limits the rate at which the reaction can occur. The activation energy is the minimum energy required for a reaction to occur, and the higher the activation energy, the slower the reaction rate will be.

Identifying the rate-determining step is important for understanding and controlling the rate of a chemical reaction.

By knowing which step is the slowest, chemists can focus on optimizing conditions for that step to increase the overall reaction rate. This can involve adjusting the temperature, pressure, and concentrations of reactants, as well as adding catalysts to lower the activation energy of the rate-determining step.

Overall, understanding the rate-determining step is critical for designing and optimizing chemical reactions in fields ranging from industrial chemistry to drug discovery.

The correct answer is option c.

To know more about activation energy refer to-

https://brainly.com/question/28384644

#SPJ11

An element is made up of only one type of atom.

A compound is made up of different atoms that are chemically joined together.

A mixture is made up of two or more different atoms or compounds that are not chemically joined together, but rather are physically mixed together.

Elements are substances that are composed of the same type of atoms and which cannot be split by an ordinary chemical process. For example, sodium, chlorine, oxygen, etc.

Compounds are substances that are comprised of two or more elements chemically combined together. For example, common salt.

Mixtures are substances that are composed of two or more substances physically combined together. For example, salt and water to form a salt solution.

Learn more about compounds and mixtures at: https://brainly.com/question/24647756

#SPJ1

Aluminum has a heat of fusion of 0.9 j/g. if you have 23.9g of aluminum, 21.51 J of energy would be required to melt this amount of aluminum at 660.3°c.

To calculate the energy required to melt 23.9 g of aluminum, we need to use the following formula:

Q = m * ΔHfus

where Q is the energy required, m is the mass of aluminum, and ΔHfus is the heat of fusion of aluminum.

Substituting the given values, we get:

Q = 23.9 g * 0.9 J/g = 21.51 J

Therefore, 21.51 J of energy would be required to melt 23.9 g of aluminum at 660.3°C.

To know more about the heat of fusion refer here :

https://brainly.com/question/14053504#

#SPJ11

California is facing a significant issue with the erosion of its coastline due to a variety of factors such as climate change, sea-level rise, human development, and natural processes.

What is Coastal erosion?

Coastal erosion is a natural process that occurs due to the forces of wind, waves, and tides. However, California's coastline is experiencing a rapid rate of erosion, which is exacerbated by human activities and climate change. According to the California Coastal Commission, sea-level rise caused by climate change is expected to worsen erosion and flooding on the state's coastlines, putting many coastal communities at risk.

California is facing the issue of coastal erosion and sea level rise, which is threatening the state's infrastructure, homes, and beaches. The coastline is eroding at a rate of 8 inches per year in some areas, and sea level is projected to rise by 1 to 4 feet by the end of the century.

Some causes of coastal erosion and sea level rise in California include climate change, human development along the coast, and groundwater extraction. According to the California Coastal Commission, "over a century of development along the coast has significantly altered natural processes that shape our coastline, including the movement of sand and sediment, the flow of rivers and streams, and the distribution of natural habitats."

Techniques that are being used to address the issue of coastal erosion in California include beach nourishment, seawalls, and managed retreat. Beach nourishment involves adding sand to beaches to replace what has been lost due to erosion. Seawalls are structures built along the coastline to protect homes and infrastructure from waves and erosion. Managed retreat involves moving buildings and infrastructure away from the coast in order to allow the shoreline to shift and adapt to sea level rise.

The effectiveness of these techniques depends on a variety of factors, including the location and severity of erosion, the cost of implementation, and the potential environmental impacts. Beach nourishment can be effective in restoring beaches and protecting infrastructure in the short term, but it may not be sustainable in the long term. Seawalls can provide immediate protection but can also worsen erosion in adjacent areas and have negative impacts on natural habitats. Managed retreat is a long-term solution but can be difficult to implement due to political and economic factors.

The eroding coastline is likely to have significant impacts on the residents of California, particularly those living along the coast. Infrastructure and homes are at risk of damage or destruction, and beaches may become unusable. The loss of natural habitats and the impact on the tourism industry could also have economic impacts on the state.

To know more about Coastal erosion, visit;

https://brainly.com/question/31529015

#SPJ4

The new temperature is 40°C, the volume of the balloon will be 1050ml, the temperature that the container will contain is 580°C, the new volume is 437mL, the pressure setting should be 2.05atm.

Now solving the sub questions

4. Here we have to apply the formula for Charles's law in which

V1/T1 = V2/T2

Here

V1 and T1 = initial volume and temperature

V2 and T2 = final volume and temperature

Apply this formula, we can find that the new temperature is

20°C × (50L/25L)

= 40°C.

5. Here we have to apply Boyle's law which states  the formula for Boyle's law is

P1V1 = P2V2

Here P1 and V1 = initial pressure and volume

P2 and V2 = final pressure and volume

Applying this formula, we can evaluate that the new volume of the balloon is

600ml × (700mmHg/400mmHg)

= 1050ml.

6. Here we have to apply Gay-Lussac's law  the formula for Gay-Lussac's law is

P1/T1 = P2/T2

Here

P1 and T1 = initial pressure and temperature

P2 and T2 = final pressure and temperature

Applying this formula, we can evaluate that the new temperature is

(645torr × 25°C)/(2.21atm)

= 580°C.

7. Here we have to apply Avogadro's law the formula for Avogadro's law is

n1/V1 = n2/V2

Here

n1 and V1 = initial number of moles of gas  volume n2 and V2 = final number of moles of gas and volume

Applying this formula, we can evaluate that the new volume is

(0.250mol/0.373mol) × 650mL

= 437mL.

8. Here we have to apply Gay-Lussac's law the formula  is

P1/T1 = P2/T2

Here

P1 and T1 = initial pressure and temperature

P2 and T2 = final pressure and temperature

Applying this formula, we can evaluate that the new pressure setting should be

(165°C + 273K)/(100°C + 273K) × 1atm

= 2.05atm.

To learn more about volume

https://brainly.com/question/27710307

#SPJ4

The molality of a solution formed by mixing 104 g. Of silver nitrate(AgNO₃) with 1. 75 kg of water is 0.350 mol/kg.

The molality of a solution formed by mixing 104 g of silver nitrate (AgNO₃) with 1.75 kg of water can be calculated as follows:

1. First, convert the mass of silver nitrate to moles:

104 g AgNO₃ * (1 mol AgNO₃/169.87 g AgNO₃) = 0.6122 mol AgNO₃

2. Then, calculate the mass of water in kilograms:

1.75 kg water = 1750 g water

3. Finally, divide the moles of AgNO₃ by the mass of water in kilograms to get the molality:

molality = 0.6122 mol AgNO₃ / 1.75 kg water = 0.350 mol/kg

To know more about the molality refer here :

https://brainly.com/question/14591804#

#SPJ11

There are seven sequential steps of scientific research.

The scientific method is a process used when conducting experiments and exploring observations. Some areas of science rely more heavily on this method to answer questions, as they are more easily tested than other areas.

This method aims to discover the relationships between cause and effect in various situations and applications. The 7 steps of scientific research are -

Therefore, there are seven sequential steps of scientific research.

Learn more about Scientific research, here:

https://brainly.com/question/30547498

#SPJ2

When a double-slit experiment is performed with electrons, an interference pattern is observed on the screen behind the slits.

The interference pattern is a result of the wave-like nature of the electrons. Just like waves, electrons can interfere constructively or destructively with each other, leading to bright and dark fringes on the screen.

The bright fringes correspond to constructive interference, where the peaks of the electron waves overlap and reinforce each other, while the dark fringes correspond to destructive interference, where the peaks of one electron wave overlap with the troughs of another electron wave, canceling each other out.

The interference pattern observed in the double-slit experiment is one of the key pieces of evidence supporting the wave-particle duality of matter, which states that matter particles like electrons can exhibit both wave-like and particle-like behavior depending on the experimental setup.

To know more about double-slit experiment refer to-

https://brainly.com/question/28108126

#SPJ11

The quality of the two-phase liquid-vapor mixture of H2O at 40°C with a specific volume of 10 m3/kg is approximately 0.1176 or 11.76%.

The quality of a two-phase liquid-vapor mixture is the fraction of the total mass that is in the vapor phase. The specific volume of a substance is the volume occupied by one kilogram of that substance.

Since the mixture is two-phase, it means it is a combination of liquid and vapor phases. At a given temperature and pressure, the quality of a mixture is determined by its specific volume.

Given:

Temperature of mixture (T) = 40°C

Specific volume of mixture (v) = 10 m3/kg

Using the saturated water table, we can find that at 40°C, the specific volume of the saturated liquid (vf) is 0.001067 m3/kg and the specific volume of the saturated vapor (vg) is 0.08608 m3/kg.

Since the mixture is two-phase, we can use the following equation to calculate the quality:

x = (v - vf)/(vg - vf)

where x is the quality of the mixture.

Plugging in the values, we get:

x = (10 - 0.001067)/(0.08608 - 0.001067)

x = 0.1176

To know more about specific volume refer to-

https://brainly.com/question/1463418

#SPJ11

A dolphin living without a group can experience increased stress levels and difficulty in finding food and mating partners.

What is Dolphin?

A dolphin is a highly intelligent and social aquatic mammal that belongs to the family Delphinidae. Dolphins are known for their playful behavior, high intelligence, and communication skills.

Dolphins are highly social animals that live in groups called pods. Being a social animal, dolphins depend on their pod for several important aspects of their life, including hunting, mating, and protection. When a dolphin is forced out of its pod, it loses the benefits of group living and is forced to live alone. This can lead to increased stress levels for the dolphin, as it has to fend for itself and find its own food without the help of the pod.

To know more about Dolphin, visit;

https://brainly.com/question/30102341

#SPJ4

The net ionic equation when the ammonium nitrate is dissolved in the water :

NH₄NO₃(s) + H₂O(l) ⇄ NH₄⁺(aq)  + NO₃⁻(aq)

The component that will ionizes in the aqueous solution that is the ammonium ion. The nitrate ion is that does not ionize in the aqueous solution.

The acid-base hydrolysis in equilibrium that is the established when the ammonium nitrate is dissolved in the water, the net ionic equation is as :

NH₄NO₃(s) + H₂O(l) ⇄ NH₄⁺(aq)  + NO₃⁻(aq)

The ions has the equal and the oppisite charges. They both can combine in the electrically neutral ratio of the 1:1.  The net ionic equation can be depicts by the molecules and the ions.

To learn more about net ionic equation here

https://brainly.com/question/29299745

#SPJ4

The reaction involves 3 moles of [tex]O_2[/tex] and [X] mol [tex]H_3PO_4[/tex]. The number of moles  [tex]H_3PO_4[/tex]  is not given, The number of moles  [tex]H_3PO_4[/tex] that can form during the reaction.  

The number of moles of  [tex]H_3PO_4[/tex] that can form during a reaction, we need to know the number of moles of reactants and the number of moles of products involved in the reaction, as well as the ratio of the coefficients of the reactants and products.

In this case, the reaction is:

[X] mol  [tex]H_3PO_4[/tex] + 3 mol  [tex]O_2[/tex]  → 3 mol  [tex]H_2O[/tex]. + 3 mol [tex]P_4O_{10[/tex]

We can start by solving for the number of moles of  [tex]H_3PO_4[/tex] that can form:

[X]  mol  [tex]H_3PO_4[/tex] + 3 mol  [tex]O_2[/tex]  → 3 mol  [tex]H_2O[/tex]. + 3 mol  [tex]P_4O_{10[/tex]

[X] mol  [tex]H_3PO_4[/tex] + 3 mol  [tex]O_2[/tex]  → 3 mol  [tex]H_2O[/tex]. + 3 mol  [tex]P_4O_{10[/tex]

1 mole  [tex]H_3PO_4[/tex] can form 3 moles of  [tex]H_2O[/tex]., so:

[X] mol  [tex]H_3PO_4[/tex] * 3 mol  [tex]H_2O[/tex]/mol  [tex]H_3PO_4[/tex] = 3 mol  [tex]H_2O[/tex].

Therefore, 1 mole of  [tex]H_3PO_4[/tex] can form 3 moles of [tex]H_2O[/tex].

The number of moles of  [tex]H_3PO_4[/tex] that can form during the reaction, we need to know the number of moles of reactants and the number of moles of products involved in the reaction, as well as the ratio of the coefficients of the reactants and products.

The reaction involves 3 moles of  [tex]O_2[/tex]  and [X] mol  [tex]H_3PO_4[/tex]. The number of moles of  [tex]H_3PO_4[/tex] is not given, so we cannot determine the number of moles of  [tex]H_3PO_4[/tex] that can form during the reaction.  

Learn more about moles Visit: brainly.com/question/29367909

#SPJ4

If the unknown solution reacts with potassium carbonate to form a white precipitate, then it contains strontium ions, indicating that the unknown solution is strontium nitrate.

On the other hand, if the unknown solution reacts with potassium sulfate to form a white precipitate, then it contains magnesium ions, indicating that the unknown solution is magnesium nitrate.

Therefore, based on the observations, if a white precipitate is observed when the unknown solution is mixed with potassium carbonate and no precipitate is observed when the unknown solution is mixed with potassium sulfate, the unknown solution is most likely strontium nitrate.

If no precipitate is observed when the unknown solution is mixed with both potassium carbonate and potassium sulfate, the unknown solution is most likely magnesium nitrate.

Therefore, we can determine the identity of the unknown solution by observing the reaction with potassium carbonate and potassium sulfate.

For more question on carbonate

https://brainly.com/question/30594488

#SPJ11

Small peptides buffer stomach acid, so the pH does not fall excessively low.

The stomach produces hydrochloric acid, which helps in the digestion of food by breaking down complex molecules into simpler ones. However, excessive production of stomach acid can lead to various digestive disorders, such as acid reflux, ulcers, and gastritis.

Small peptides are short chains of amino acids that are produced during the digestion of proteins. They have a buffering effect on stomach acid by neutralizing the excess acid, which helps to maintain the pH of the stomach within a healthy range.

This buffering action is important for protecting the stomach lining from the harmful effects of excess acid, as well as for ensuring efficient digestion and absorption of nutrients from food.

Therefore, consuming protein-rich foods that can be broken down into small peptides may help to buffer stomach acid and prevent digestive problems associated with excess acid.

To know more about pH refer to-

https://brainly.com/question/491373

#SPJ11

Reactions like this one absorb energy because the reactants have more potential energy than the products, option C is correct.

In exothermic reactions, the products have less potential energy than the reactants. The difference in potential energy between the reactants and products is the energy released during the reaction. This energy is usually released in the form of heat, which causes an increase in temperature.

The reaction releases energy because the products are more stable than the reactants, which means that less energy is required to maintain their chemical bonds. This extra energy is released during the reaction, resulting in a net release of energy, option C is correct.

To learn more about reactions follow the link:

https://brainly.com/question/29206227

#SPJ4

The complete question is:

During this chemical reaction energy is released. In the chemistry lab, this would be indicated by an increase in temperature or, if the reaction took place in a test tube, the test tube would feel warmer to the touch. Reactions like this one absorb energy because

A) the reaction requires activation energy.

B) the reactants have less potential energy than the products.

C) the reactants have more potential energy than the products.

D) the mass of the products is greater than the mass of the reactants.

One possible process to separate nickel tetracarbonyl and iron pentacarbonyl is fractional distillation. Since the boiling points of the two liquids are different, the process can take advantage of this difference to separate the components.

Fractional distillation works by heating the mixture in a distillation apparatus, which causes the liquids to vaporize. The vapor is then condensed back into a liquid and collected. However, the composition of the vapor is not uniform, with more volatile components having a higher concentration.

By using a fractionating column, which contains many plates or packing material, the vapor is forced to condense and evaporate multiple times.

As the vapor travels up the column, the components with lower boiling points will vaporize and travel up more easily, while the components with higher boiling points will condense and fall back down more frequently. This process effectively separates the components based on their boiling points.

In the case of nickel tetracarbonyl and iron pentacarbonyl, the fractional distillation apparatus would be set up, and the mixture would be heated. As the vapor rises up the column, the nickel tetracarbonyl, with its lower boiling point, would vaporize and travel up the column more easily, while the iron pentacarbonyl would condense and fall back down more frequently.

The components can then be collected separately at the end of the apparatus, resulting in the separation of the two liquids.

To know more about fractional distillation refer to-

https://brainly.com/question/29037176

#SPJ11

The frequency and energy of collisions between reactant molecules have an impact on the rate of a chemical reaction, according to collision theory.

The reactant particles must collide with enough energy during solution formation to overcome the attraction forces holding them together and create a new product. Important elements in this process are particle size and motion.

More collisions are possible due to the larger surface area that smaller particle sizes offer. The probability that faster-moving particles may collide with another particle with enough energy to start a successful reaction is also increased.

To know more about collision theory, visit,

https://brainly.com/question/20628781

#SPJ4

To solve this problem, we need to use the ideal gas law which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Rearranging this equation, we can solve for n by dividing both sides by RT.

n = PV/RT
Now, we can plug in the given values:
n = (4.2 atm)(128 L)/(0.0821 L*atm/mol*K)(382 K)

n = 16.4 moles
Therefore, 16.4 moles of gas occupy 128L at a pressure of 4.2 atm and a temperature of 382K.

It's important to note that the ideal gas law is only applicable to ideal gases, which follow certain assumptions such as having no intermolecular forces and having particles with negligible volume. Real gases can deviate from these assumptions, especially at high pressures and low temperatures. However, for most practical purposes, the ideal gas law provides a good approximation of gas behavior.

To know more about ideal gas law refer here

https://brainly.com/question/28257995#

#SPJ11

The pOH of the 3.14x10^-5 M solution is approximately 9.50 (rounded to 2 decimal places).

To calculate the pOH of a 3.14x10^-5 M solution, first find the pH using the formula:

pH = -log10[H+]

Where [H+] represents the concentration of hydrogen ions in the solution. In this case, the concentration is 3.14x10^-5 M. Then, calculate the pOH using the relationship between pH and pOH:

pH + pOH = 14

First, find the pH:

pH = -log10(3.14x10^-5) ≈ 4.50

Now, calculate the pOH:

pOH = 14 - pH = 14 - 4.50 ≈ 9.50

So, the pOH of the 3.14x10^-5 M solution is approximately 9.50 (rounded to 2 decimal places).

Know more about pOH here:

https://brainly.com/question/480457

#SPJ11

The correct answer is iron(III) chloride.

The molar mass of iron (Fe) is approximately 55.8 g/mol, and the molar mass of chlorine (Cl) is approximately 35.5 g/mol.

To determine the compound, we can calculate the empirical formula, which gives the simplest whole-number ratio of atoms in the compound.

Assuming a 100 g sample of the compound, we have:

34.4 g Fe

65.6 g Cl

Converting these masses to moles:

34.4 g Fe / 55.8 g/mol Fe = 0.616 mol Fe

65.6 g Cl / 35.5 g/mol Cl = 1.85 mol Cl

Dividing by the smaller number of moles to get the simplest whole-number ratio:

Fe:Cl = 0.616 mol : (1.85 mol / 0.616 mol) = 0.616 mol : 3 mol

So the empirical formula is FeCl3, which is iron(III) chloride.

Therefore, the correct answer is iron(III) chloride (FeCl3).

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

1.44 liters of 0.125 M [tex]KMnO4[/tex] solution is required to yield 0.180 mol of [tex]KMnO4[/tex].

To determine the volume of 0.125 M [tex]KMnO4[/tex] solution required to yield 0.180 mol of [tex]KMnO4[/tex], we can use the following formula:

moles = concentration x volume

We can rearrange this formula to solve for volume:

volume = moles / concentration

First, we can calculate the volume of 0.125 M [tex]KMnO4[/tex] solution that contains 0.180 moles of [tex]KMnO4[/tex]:

volume = moles / concentration

volume = 0.180 mol / 0.125 mol/L

volume = 1.44 L

Therefore, 1.44 liters of 0.125 M [tex]KMnO4[/tex] solution is required to yield 0.180 mol of [tex]KMnO4[/tex].

To know more about yield refer to-

https://brainly.com/question/30700754

#SPJ11

The amount of Ca(OH)₂ produced = 5.2 g which is calculated in the below section.

NUMBER OF MOLES of HCl = Molarity of solution x Volume of Solution

# of moles of HCl = (0.40 mol/L ) x 350 mL

                              = (0.40 mol/L ) x 0.350 L

                              = 0.14 mol

The mass of HCl that makes 0.14 mol of HCl

Mass of HCl= # of moles x molar mass of HCl

Mass of HCl = 0.14 mol x 36.5 g/ mol

Mass of HCl = 5.11g

As per Stoichiometry , 1g of HCl reacts with 1.015 g of Ca (OH)₂

So, 5.11g of HCl can react with 5.11 x 1.015  g

                                                 = 5.1865 g or 5.2 g of Ca(OH)₂

To learn more about number of moles check the link below-

https://brainly.com/question/29367909

#SPJ4

A titration is a laboratory technique used to determine the concentration of an unknown solution by reacting it with a solution of known concentration.

In a typical titration, a burette is filled with the known solution (titrant) and is gradually added to the unknown solution (analyte) in a flask, until the reaction between the two solutions is complete.

A lab report on titration should include the following sections:

1. Introduction: Provide an overview of the purpose of the experiment and the concept of titration.

2. Materials and Methods: List the chemicals, glassware, and equipment used in the experiment, and describe the step-by-step procedure followed during the titration.

3. Results: Present your raw data, including initial and final burette readings and the volume of titrant used. Calculate the concentration of the unknown solution using the stoichiometry of the reaction and the known concentration of the titrant.

4. Discussion: Analyze your results and explain any discrepancies or sources of error that may have occurred during the experiment.

5. Conclusion: Summarize the main findings of the experiment and emphasize their significance.

Remember to always follow any specific guidelines provided by your instructor or institution.

To learn more about concentration, refer below:

https://brainly.com/question/10725862

#SPJ11

The answer is 120.0 g of sodium hydroxide are produced. The correct answer is option c.

The balanced equation for the reaction is:

[tex]2 Na + 2 H2O → 2 NaOH + H2[/tex]

From the equation, it can be seen that 2 moles of NaOH are produced for every 2 moles of Na that react. Therefore, the number of moles of NaOH produced can be calculated as follows:

moles of NaOH = moles of Na = mass of Na / molar mass of Na

molar mass of Na = 22.99 g/mol

moles of NaOH = 68.97 g / 22.99 g/mol = 3.00 mol

So, 3.00 moles of NaOH are produced. To convert to grams, we can use the molar mass of NaOH:

molar mass of NaOH = 40.00 g/mol

mass of NaOH = moles of NaOH x molar mass of NaOH

mass of NaOH = 3.00 mol x 40.00 g/mol = 120.00 g

Therefore, the answer is (c) 120.0 g of sodium hydroxide are produced.

To know more about  sodium hydroxide refer to-

https://brainly.com/question/29327783

#SPJ11