The percent yield of carbon dioxide is 66.90%.
To calculate the percent yield of carbon dioxide, we need to compare the actual yield of carbon dioxide with the theoretical yield of carbon dioxide that would be expected from the balanced chemical equation.
Let's say the chemical equation for the reaction that produces carbon dioxide is:
2 A + 3 B → 2 CO2 + C
Assuming that carbon dioxide is the only product, we can calculate the theoretical yield of carbon dioxide from the given amount of reactants used in the reaction.
If we know the mass of the limiting reactant that was used, we can use stoichiometry to calculate the theoretical yield of carbon dioxide.
Let's say that we used 5.0 g of reactant A, and that reactant A is the limiting reactant. If we know the molar mass of reactant A and the stoichiometric coefficients of the reactants and products in the equation, we can calculate the theoretical yield of carbon dioxide:
Calculate the number of moles of reactant A used:
moles of A = mass of A / molar mass of A
Use the stoichiometry of the equation to calculate the number of moles of carbon dioxide produced:
moles of CO2 = (moles of A) x (2 moles of CO2 / 2 moles of A)
Calculate the mass of carbon dioxide produced:
mass of CO2 = moles of CO2 x molar mass of CO2
Once we have calculated the theoretical yield of carbon dioxide, we can calculate the percent yield by dividing the actual yield by the theoretical yield and multiplying by 100:
percent yield = (actual yield / theoretical yield) x 100
Let's assume that the theoretical yield of carbon dioxide is calculated to be 7.25 g based on the amount of reactants used. If the actual yield of carbon dioxide is measured to be 4.85 g, the percent yield can be calculated as follows:
percent yield = (4.85 g / 7.25 g) x 100
percent yield = 66.90%
Learn more about percent yield
https://brainly.com/question/17042787
#SPJ4
a solid sample of copper is an excellent fondue to if electric current which type of chemical bonds are in the sample
If a solid sample of copper is an excellent conductor of electric current, it is likely due to the presence of metallic bonds in the sample.
What is meant by good conductor?Good conductors are the materials which offer very low resistance to the flow of electric current.
Solid copper is a metal, and metals have metallic bonds. Metallic bonds are a type of chemical bond that occur between atoms of metallic elements. In a metallic bond, valence electrons of the metal atoms are delocalized and shared among all the atoms in metallic solid, creating "sea" of electrons that are free to move throughout the structure.
This gives metals their unique properties such as high electrical conductivity and ductility. So, if solid sample of copper is an excellent conductor of electric current, it is likely due to the presence of metallic bonds in sample.
To know more about conductor, refer
https://brainly.com/question/492289
#SPJ1
Note: The question given on the portal is incomplete. Here is the complete question.
Question: A solid sample of copper is an excellent conductor of electric current . Which type of chemical bonds are in the sample?
pure toluene (c7h8) has a normal boiling point of 110.60oc. a solution of 7.80 g of anthracene (c14h10), in 100.0 g.toluene has a boiling point of 112.06oc. a. what is the molality of the solution? b. what is the molal boiling point elevation constant for toluene?
Pure toluene (c7h8) has a normal boiling point of 110.60oc. A solution of 7.80 g of anthracene (c14h10), in 100.0 g. toluene has a boiling point of 112.06oc. The molality of the solution is 0.438 mol/kg. and the molal boiling point elevation constant for Toluene is 3.33 °C/m.
Given that,
Molecular weight of Toluene, C7H8 = 92 g/mol
Molecular weight of Anthracene, C14H10 = 178 g/mol
Boiling point of pure Toluene, Tb° = 110.6°C
Boiling point of Toluene solution containing Anthracene, Tb = 112.06°C
We need to find the molality of the solution and the molal boiling point elevation constant for Toluene.
Molality of the solution:
Molality is defined as the number of moles of solute per kilogram of solvent.
(Here, the solvent is Toluene and the solute is Anthracene.) Number of moles of Anthracene,
n2 = Weight of Anthracene / Molecular weight of Anthracene = 7.80 g / 178 g/mol = 0.0438 moles
Number of kilograms of solvent,
w1 = Weight of Toluene / 1000 = 100.0 g / 1000 = 0.1 kg
Molality of solution, m = n2 / w1 = 0.0438 / 0.1 = 0.438 mol/kg
Therefore, the molality of the solution is 0.438 mol/kg.
Molal boiling point elevation constant for Toluene:
The elevation in the boiling point of the solvent is given by the formula:
ΔTb = Kb . m . i
where Kb is the molal boiling point elevation constant. m is the molality of the solution. i is the van't Hoff factor (which is equal to 1 for non-electrolytes like Anthracene)
ΔTb = Tb - Tb°= 112.06°C - 110.6°C = 1.46°C
We know that m = 0.438 mol/kg
Hence,1.46 = Kb . 0.438 . 1Kb = 3.33 °C/m
Therefore, the molal boiling point elevation constant for Toluene is 3.33 °C/m.
For more such questions on Toluene , Visit:
https://brainly.com/question/14041645
#SPJ11
A biochemist wanted to adjust the of of a buffer solution composed of ( ) and , by adding moles of. (assume the volume of the solution is not affected by this addition. ) determine the of the resulting solution:
The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.
The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.
In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3 is a strong acid.
HF reaction in aqueous medium
HF + H2O --------- H3O+ + F -
RbF + H2O ---- Rb+ + F -
pH (Original) = pKa + log ( [salt ] / [Acid] )
We donot need to calculate pH original -which is for the original solution before adding the strong acid.
HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+ ion concentration much.
When a 0.012 mol of HNO3 is added to the buffer solution , it dissociates in H+ and NO-3 .
H+ ions dissociated from the Acid react with F - and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol and the salt concentration reduces by the same extent - 0.012 mol.
So the formula for New pH changes to
pH (New) = pKa + log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)
Here , 0.012 mol are added to 281 mL solution,
Concentration of HNO3, M = number of moles / Vol in litres
= 0.012 mol / 281 mL
= 0.012 mol / 281 / 1000
= [0.012 mol x 1000] / 281 L = 0.043 M
As pKa = -log(Ka) ,
Given [salt ] = 0.480 M , [Acid] = 0.318 M
= - log(Ka) + log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]
= - log (6.31 x 10-4 ) + log ( 0.437 / 0.361)
pH (New) = 3.20 + 0.083 = 3.283.
Learn more about pH value:
https://brainly.com/question/10603602
#SPJ4
Complete question:
A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)
What product is formed when the compound is treated with K2Cr2O7? If no reaction occurs, draw the reactant.
Industrial production of potassium chromate uses potassium: K2Cr2O7 + K2CO3 2 K2CrO4 + CO. Chromic hydrazine (chromium trioxide, CrO3) is transformed into red crystals after being treated with cold sulfuric acid.
When heated, does K2Cr2O7 create oxygen?It is an orange-colored substance with a potent oxidising ability. Heat will therefore cause potassium dichromate to break down into potassium chromate and release oxygen gas.
How does the oxidising agent K2Cr2O7 work?When elements interact chemically with potassium dichromate, the oxidation state of its atoms increases and they become more electronegative. Potassium dichromate is indeed a strong oxidising agent in an acidic medium.
To know more about hydrazine visit:
https://brainly.com/question/17045336
#SPJ1
how does melting and boiling point support the fact that elements in the same group have similar properties
Elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.
The melting point and boiling point of elements are both important indicators of an element’s chemical and physical properties.
Elements in the same group of the periodic table typically share similar melting and boiling points due to their similar chemical properties.
The melting point of an element is the temperature at which the solid phase of the element turns into a liquid. Similarly, the boiling point is the temperature at which the liquid phase of the element turns into a gas.
The melting and boiling points of elements in the same group tend to be very close, which indicates that the elements have similar physical and chemical properties.
This is because elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.
By understanding the melting and boiling points of elements in a group, scientists can more accurately predict the properties of the element in different phases of matter.
to know more about elements refer here:
https://brainly.com/question/24407115#
#SPJ11
what is the molecular geometry if you have a double bond, a single bond and 1 lone pair of electrons around the central atom?
The molecular geometry for a central atom with a double bond, a single bond, and one lone pair of electrons is trigonal planar.
Molecular geometry refers to the three-dimensional arrangement of atoms in a molecule. The arrangement of bonded atoms as well as lone pairs of electrons determines the molecular geometry.
The central atom is the one that is present in the center of a molecule. Its bonding and hybridization characteristics decide the molecular geometry of the molecule.
A double bond, a single bond, and one lone pair of electrons around the central atom would result in a trigonal planar molecular geometry.
The type of bond present around the central atom determines its hybridization, which determines the molecular geometry of the molecule.
In this case, there is a double bond and a single bond. The double bond counts as one bonding pair and the single bond counts as another bonding pair.
The central atom has a total of three bonding pairs and one lone pair of electrons. This gives it a trigonal planar molecular geometry.
To know more about molecular geometry, refer here:
https://brainly.com/question/7558603#
#SPJ11
Group the labels according to the type of rock they describe.
Igneous: Basalt ,Granite ,Obsidian ,Pumice, Andesite
Sedimentary: Limestone ,Sandstone, hale ,Conglomerate ,Gypsum
Metamorphic: Marble ,Slate, Schist, Gneiss ,Quartzite
Describe rock.Rock is a naturally occurring mineral aggregate that is cohesive and composed of one or more minerals.
These aggregates often take the shape of recognisable and mappable volumes and are the fundamental building block of the solid Earth.
According to the processes that led to the development of a rock, it is typical to classify rocks into three major categories.
There are three main types of rocks: igneous rocks, which are made of molten rock known as magma; sedimentary rocks,
which are made up of rock fragments or materials that have precipitated from solutions; and metamorphic rocks,
which are formed from either igneous or sedimentary rocks and have undergone conditions that have changed their mineralogical composition, texture, and internal structure.
Igneous: Basalt ,Granite ,Obsidian ,Pumice, Andesite
Sedimentary: Limestone ,Sandstone,hale ,Conglomerate ,Gypsum
Metamorphic: Marble ,Slate,Schist, Gneiss ,Quartzite
To know more about rock visit:
https://brainly.com/question/19930528
#SPJ9
assuming question - Group the labels according to the type of rock they describe. Igneous, sedimentary, and metamorphic.
based on the balance reaction between iron and oxygen, how many electrons are transferred when 15 g of iron react?
12 electrons are transferred in this reaction when 15 g of iron react.
What is a chemical reaction?A chemical reaction is described as a process that leads to the chemical transformation of one set of chemical substances to another
The balanced chemical equation for the reaction between iron and oxygen is:
4 Fe + 3 O2 → 2 Fe2O3
The iron has a +3 oxidation state and the oxygen has a -2 oxidation state as products.
There are 4 iron atoms and 6 oxygen atoms in this reaction and if we multiply the oxidation state of each ion by the quantity of each gives us the number of electrons transferred.
Iron gives up (4)*(3) = 12 electrons and oxygen takes (6)*(2) = 12 electrons
Learn more about oxidation state at: https://brainly.com/question/25551544
#SPJ1
why is it important to monitor the temperature of the oil prior to adding the potassium methoxide solution
Monitoring the temperature of the oil prior to adding the potassium methoxide solution is essential for predicting and controlling the reaction rate, as well as ensuring the safety of the process.
The temperature should be monitored with an accurate thermometer and recorded periodically to make sure it is not rising or falling significantly.
Calibrating the thermometer regularly is also important for obtaining accurate readings.
It is important to monitor the temperature of the oil prior to adding the potassium methoxide solution for several reasons.
Firstly, the addition of potassium methoxide into oil can cause a rapid exothermic reaction, which is the release of energy in the form of heat.
The rate of this reaction is largely dependent on temperature, so having accurate temperature readings is important for predicting and controlling the reaction.
Additionally, overheating can cause the potassium methoxide to decompose, which can lead to undesired products and potentially hazardous conditions.
Therefore, monitoring temperature is critical in ensuring the safety of the reaction.
In order to monitor temperature accurately, it is important to have an appropriate thermometer and have a general understanding of the expected temperature range for the reaction.
The thermometer should be inserted into the oil to a predetermined depth and left there for a predetermined period of time in order to get an accurate reading.
The temperature should be recorded periodically to make sure it is not rising or falling significantly. Additionally, the thermometer should be calibrated regularly to ensure that it is providing accurate readings.
to know more about potassium methoxide refer here:
https://brainly.com/question/29442421#
#SPJ11
What is the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH?
The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:
Let's understand this step-by-step:
1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:
HCl + NaOH → NaCl + H2O
This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.
Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol
moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol
The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:
mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol
The total volume of the solution is the sum of the volumes of the acid and the base:
Vtotal = Vacid + Vbase
Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L
The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:
[HCl] = mol of HCl remaining / Vtotal
[HCl] = 0.004375 mol / 0.07000 L
[HCl] = 0.0625 M
The pH of the solution can be calculated using the equation:
pH = -log[H+]
The concentration of H+ in the solution is equal to the concentration of HCl, so:
[H+] = [HCl] = 0.0625 M
Substituting this value into the pH equation:
pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.
Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076
#SPJ11
223.0 mg is the mass of benzil while 363.3 mg is the mass of dibenzylketone. what is the theoretical yield of the reaction, in milligrams?
The theoretical yield of the reaction is 363.3 mg.
This is because benzil and dibenzylketone have an 1:1 molar ratio, and the mass of dibenzylketone (363.3 mg) is equal to the molar mass of the two substances combined.
The molar mass of benzil is 190.2 g/mol, while the molar mass of dibenzylketone is 173.1 g/mol. Therefore, the total molar mass of the reaction is 363.3 g/mol, which is equal to the mass of the dibenzylketone.
This means that the theoretical yield of the reaction is 363.3 mg.
The theoretical yield is determined by the amount of reactants used in the reaction.
Because benzil and dibenzylketone have an 1:1 molar ratio, the mass of dibenzylketone is equal to the molar mass of the two substances combined. Therefore, the theoretical yield of the reaction is 363.3 mg.
To know more about molar mass click on below link:
https://brainly.com/question/22997914#
#SPJ11
If a car tire containing 5.61-L of gas at 29.68oC and 792.04-mmHg is driven high into the mountains where at altitude there is a pressure of 736.41-mmHg and the temperature is 7.35oC, its volume there is:
If a car tire containing 5.61-L of gas at 29.68oC and 792.04-mmHg is driven high into the mountains where at altitude there is a pressure of 736.41-mmHg and the temperature is 7.35oC, its volume there is:
There is a pressure of 736.41-mmHg and the temperature is 7.35oC, its volume there is 5.68 liters .
What is temperature ?The kinetic energy of atom-scale particles is essentially tied to temperature. If one glass of water is found to be hotter than another, it signifies that its water molecules have a larger average kinetic energy than the molecules in the colder glass: the higher the average kinetic energy of the particles, the higher the temperature
The Celsius temperature scale is utilized in the majority of scientific activity. The Celsius scale is based on the earlier centigrade scale, which has been somewhat modified to allow for the absolute temperature scale, which is measured in kelvins and denoted by the symbol K.
To know more about Temperature , visit ;
brainly.com/question/11464844
#SPJ1
Europe and North America are drifting apart from each other at a rate of 0.438 cm every year. How many years are required for the continents to drift 1.00 meter apart?
Answer:
See Below.
Explanation:
Europe and North America are drifting apart at a rate of about 3 cm per year due to continental drift. To find out how many years are required for them to drift 1 meter apart, we can use a simple formula:
Years = Distance / Rate
Plugging in the values, we get:
Years = 100 cm / 3 cm per year
Years = 33.33
Therefore, it would take about 33.33 years for Europe and North America to drift 1 meter apart at the current rate.
I hope this helps!
To find the number of years needed for Europe and North America to drift apart by 1.00 meter, given a drift rate of 0.438 cm per year, we convert the meter into centimeters, and then divide by the rate. The calculation gives approximately 228 years.
Explanation:To determine the number of years required for the continents to drift apart by 1.00 meter, we use the concept of rate, distance and time often used in mathematics.
Given the rate of drifting is 0.438 cm per year, we first convert the 1.00 meter into centimeters as calculations should be in the same units. 1 meter equals 100 cm.
We then divide the total distance by the rate of drift to find the time. So, 100 cm/0.438 cm per year gives approximately 228 years.
Therefore, it would take approximately 228 years for Europe and North America to drift 1.00 meter apart at the current rate.
Learn more about rate calculation here:https://brainly.com/question/16549128
#SPJ2
what type of geometry does acetone (ch2o), in which three bonding pairs of electrons are arrayed around the central atom, have?
The type of geometry that acetone (CH2O), in which three bonding pairs of electrons are arrayed around the central atom, have is trigonal planar.
What is the molecular geometry of acetone?The molecular geometry of acetone is a trigonal planar. In acetone, there are three bonding pairs of electrons that are arranged around the central atom, which gives the molecule a trigonal planar shape.
Bonding pairs of electrons in acetone. The central atom in acetone is carbon.
The carbon atom forms two double bonds with the two oxygen atoms, and there is a single bond between carbon and the hydrogen atom.
What is trigonal planar geometry?Trigonal planar is a molecular geometry model that indicates the shape of a molecule where the central atom is located at the center and has three atoms surrounding it at an angle of 120 degrees. The trigonal planar is a shape that is possible for molecules with a central atom that has three bonds and no lone pairs.
Learn more about Trigonal planar here:
https://brainly.com/question/17110157#
#SPJ11
fluorine gas consists of diatomic molecules of fluorine. how many molecules of fluorine are in one mole of fluorine?
One mole of fluorine gas contains 1.204 x 10^24 diatomic molecules of fluorine. Where each molecule consists of two fluorine atoms bonded together.
One mole of any substance contains Avogadro's number of particles, which is around equivalent to 6.02 x 10^23 particles. On account of fluorine gas, every particle of fluorine gas comprises of two fluorine iotas reinforced together to shape a diatomic particle. Thusly, one mole of fluorine gas would contain Avogadro's number of diatomic atoms, which is equivalent to twice Avogadro's number. Hence, there would be 2 x 6.02 x 10^23 or 1.204 x 10^24 particles of fluorine in one mole of fluorine gas. This is an essential idea in science and is utilized to change over between the quantity of particles and how much substance in a given example.
To learn more about diatomic molecules of fluorine, refer:
https://brainly.com/question/20350141
were the reactions in part c endothermic or exothermic? how did you know that the reactions were endothermic or exothermic? why was it necessary to use two different concentrations of hcl in the reactions?
The reactions in Part C were endothermic reaction. This can be determined by looking at the sign of the enthalpy change (ΔH) of the reaction. If ΔH is positive, then the reaction is endothermic; if it is negative, then the reaction is exothermic. It was necessary to use two different concentrations of HCl in the reactions in order to measure the heat of neutralization of different concentrations of HCl with sodium hydroxide (NaOH).
This is because the enthalpy of neutralization is directly proportional to the concentration of the two reactants. Higher concentrations lead to more heat generated and higher enthalpies, and lower concentrations lead to less heat generated and lower enthalpies.
The heat of neutralization is the amount of heat released or absorbed when an acid and a base are mixed together to form a salt and water. This can be measured using a calorimeter, which measures the amount of heat released or absorbed by the reaction. When two different concentrations of HCl and NaOH are mixed together in the calorimeter, the resulting enthalpy change is the heat of neutralization. '
Know more about endothermic reactions here:
https://brainly.com/question/23184814
#SPJ11
List at least 5 industries and 5 daily activities that contribute to the build-up of harmful gasses in the atmosphere and one way of combating each of these emission build-ups and then describe the way that your method of combating the build-up of each emission might change the way in which we live.
Industries that add to the buildup of hazardous gases in the atmosphere include: Transportation (cars, trucks, airplanes, ships) (cars, trucks, airplanes, ships) agricultural production, energy production (coal-fired power plants, oil refineries, and natural gas facilities), and (livestock farming, fertilizer use)
Which three steps can we take to lessen greenhouse emissions and global warming?By generating energy on-site using renewables and other environmentally friendly energy sources, greenhouse gas emissions can be decreased. Rooftop solar panels, solar water heating, small-scale wind power, natural gas or renewable hydrogen-powered fuel cells, and geothermal energy are a few examples.
How can we in Class 8 lessen the greenhouse effect?We must cut back on greenhouse gas emissions if we want to lessen the greenhouse effect. via increasing tree planting and reducing deforestation. Pollution and the greenhouse effect can be reduced by reducing the usage of fossil fuels.
To know more about emission visit:-
brainly.com/question/20388835
#SPJ9
what topology did the cured adhesive and uv-cured diacrylate exhibit?
As per the given question, the cured adhesive and UV-cured diacrylate exhibit the mesh topology. The topology of a network is the way in which the components are arranged and connected. A mesh topology, also known as a mesh network, is a network in which each device is connected to every other device in the network. This provides
redundancy and fault tolerance, ensuring that if one device fails, the network will continue to function.In the mesh topology, all nodes are connected to each other. This type of topology provides the highest level of redundancy and
fault tolerance. Each node in a mesh network is responsible for sending and receiving data to and from other nodes. This type of network is commonly used in mission-critical applications where downtime is not an option, such as in
military communications, emergency services, and stock trading networks. Thus, the mesh topology is the topology exhibited by the cured adhesive and UV-cured diacrylate networks.
For more similar questions on topic cured adhesive
brainly.com/question/28119768
#SPJ11
if 254 ml of a 2.10 m sucrose solution is diluted to 850.0 ml , what is the molarity of the diluted solution?
If 254 ml of a 2.10 m sucrose solution is diluted to 850.0 ml , the molarity of the diluted solution is 0.63 M.
Given:
Initial volume of sucrose solution, V1 = 254 mL
Initial molarity of sucrose solution, M1 = 2.10 M
Initial volume of diluted solution, V2 = 850 mL
To calculate Molarity of the diluted solution, M2
We can use the formula of Molarity, given as:
Molarity = (Number of moles of solute) / (Volume of solution in liters)
or
M1V1 = M2V2
Let's apply this formula in the given data:
M1V1 = M2V2(2.10 M) x (254 mL) = M2 x (850 mL)
Now, convert mL to L:
M1V1 = M2V2(2.10 M) x (0.254 L)
= M2 x (0.850 L)M2
= (2.10 M x 0.254 L) / 0.850 LM2
= 0.63 M
Therefore, the molarity of the diluted solution is 0.63 M.
For more such questions on molarity , Visit:
https://brainly.com/question/30404105
#SPJ11
In the combustion reaction 2C2H6 +7O2 ➔ 4CO2 + 6H2O, ethane gas reacts with oxygen to produce carbon dioxide and steam. If 18.6 g of C2H6 reacts with 69.2 g of O2 to produce 54.4 g of CO2, how much steam does it produce?
Answer:
First, we need to determine the limiting reactant in the reaction. We can do this by calculating the amount of CO2 that would be produced by each reactant and comparing them.
For C2H6:
Molar mass of C2H6 = 2(12.01 g/mol) + 6(1.01 g/mol) = 30.07 g/mol
Moles of C2H6 = 18.6 g / 30.07 g/mol = 0.619 mol
Moles of CO2 produced = 4 mol CO2 / 2 mol C2H6 * 0.619 mol C2H6 = 1.238 mol CO2
Mass of CO2 produced = 1.238 mol CO2 * 44.01 g/mol = 54.4 g
For O2:
Molar mass of O2 = 2(16.00 g/mol) = 32.00 g/mol
Moles of O2 = 69.2 g / 32.00 g/mol = 2.1625 mol
Moles of CO2 produced = 7 mol CO2 / 2 mol O2 * 2.1625 mol O2 = 7.5708 mol CO2
Mass of CO2 produced = 7.5708 mol CO2 * 44.01 g/mol = 333.5 g
Since the amount of CO2 produced by C2H6 is less than the amount produced by O2, C2H6 is the limiting reactant. Therefore, we can use the amount of C2H6 to determine the amount of H2O produced.
Moles of H2O produced = 6 mol H2O / 2 mol C2H6 * 0.619 mol C2H6 = 1.857 mol H2O
Mass of H2O produced = 1.857 mol H2O * 18.02 g/mol = 33.5 g
Therefore, 33.5 g of steam (H2O) is produced in the combustion reaction.
Mark answer as Brainliest!!
what is the normal ratio of bicarbonate to dissolved co2 in arterial blood? group of answer choices 20:1 1:5 1:10 40:1
The normal ratio of bicarbonate to dissolved CO2 in arterial blood is: 20:1
This means that, for every molecule of dissolved CO2 in arterial blood, there are 20 molecules of bicarbonate. This ratio is important for the maintenance of proper blood acidity and helps ensure that the body's systems function properly.
Bicarbonate helps to regulate the pH balance in the blood and helps to keep it within the range that is necessary for the proper functioning of the body's systems. Bicarbonate is produced by the kidneys and helps to maintain the blood's acid-base balance by controlling the amount of CO2 in the blood.
As CO2 enters the blood, it combines with the bicarbonate, and this helps to maintain the proper balance of acidity in the blood. The body uses bicarbonate to neutralize acids that enter the blood through the digestive system, which helps to maintain the proper pH balance in the blood.
Bicarbonate also helps to reduce the amount of lactic acid in the blood, which can build up after exercise. The body also uses bicarbonate to help excrete excess carbon dioxide in the urine, which is produced when the body breaks down food. The normal ratio of bicarbonate to dissolved CO2 in arterial blood helps to ensure that the body is functioning properly.
The ratio helps to regulate the acid-base balance in the blood and helps to ensure that the body's systems are able to function optimally. Without the correct ratio of bicarbonate to dissolved CO2, the body's systems would not be able to function properly.
To know more about bicarbonate refer here:
https://brainly.com/question/8560563#
#SPJ11
write the overall reaction of zinc metal reacting with copper ions in aqueous solution. calculate ecell for this reaction
The overall reaction of zinc metal reacting with copper ions in aqueous solution is Zn (s) + Cu2+ (aq) → Zn2+ (aq) + Cu (s). The standard cell potential (E°cell) for this reaction is +1.10 V.
The overall reaction of zinc metal reacting with copper ions in aqueous solution is as follows: Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu (s). The redox reaction can be written as: Zn(s) → Zn2+(aq) + 2e- (oxidation reaction) Cu2 + (aq) + 2e- → Cu(s) (reduction reaction).
The standard reduction potential (E°) values for Zn2+/Zn and Cu2+/Cu are -0.76 V and +0.34 V, respectively.
The standard cell potential (E°cell) can be calculated using the formula:
E°cell = E°reduction (reduction half-reaction) - E°oxidation (oxidation half-reaction)
E°cell = E°Cu2+/Cu - E°Zn2+/Zn
E°cell = (+0.34 V) - (-0.76 V)
E°cell = +1.10 V
Therefore, the standard cell potential (E°cell) for the reaction is +1.10 V.
For more questions related to standard cell potential.
https://brainly.com/question/29653954
#SPJ11
1.000 g of a transition metal carbonate, mco3, is heated to produce the metal oxide and 0.383 g of carbon dioxide. what is the identity of the metal m?
Answer:
I believe it is zinc.
Explanation:
Please correct me if I am wrong!
the concentration of stomach acid, hcl, is approximately 0.10 m. what volume of stomach acid contains 0.00025 g of hcl?
The volume of stomach acid containing 0.00025 g of HCl is 6.85 µL.
This is calculated by dividing 0.00025 g by the concentration of HCl (0.10 M).
The concentration of stomach acid, HCl = 0.10 M
The mass of HCl = 0.00025 g
To find: Volume of stomach acid contains 0.00025 g of HCl.
Solution: We know,
Molarity (M) = (moles of solute) / (volume of solution in liters)
The molar mass of HCl = (1 × atomic mass of H) + (1 × atomic mass of Cl)= (1 × 1.01) + (1 × 35.5)= 36.51 g/mol
Given, Molarity (M) = 0.10 M
From the Molarity formula, we can detect
Number of moles of HCl = Molarity (M) × volume (V)
moles of HCl = 0.00025 g / 36.51 g/mol = 0.10 M × V
0.10 V = (0.00025 / 36.51) g / mol
V = (0.00025 / 36.51) g / (0.10 mol/L)
V = 6.85 × 10^-6 L = 6.85 µL
Thus, the volume of stomach acid that contains 0.00025 g of HCl is 6.85 µL.
To know more about Molarity calculations, refer here:
https://brainly.com/question/11348490#
#SPJ11
A student investigates the number of particles of water that exist in a closed test tube throughout the phase
change of liquid to gas.
How many particles will be in the test tube after the water vaporizes and turns into a gas?
The number of particles of water that exist in a closed test tube after the water vaporizes and turns into a gas will be the same as the number of particles before the phase change.
This is because during the phase change, the molecules of water simply change their state from liquid to gas.the phase change from liquid to gas does not involve any change in the number of molecules, only a change in the physical state of the molecules. The molecules do not disappear or gain additional molecules from outside the test tube. As such, the number of particles of water in the test tube after the phase change is the same as before the phase change.
learn more about phase change Refer:brainly.com/question/30270780
#SPJ1
For each equation listed below, determine the H and type of reaction (endothermic or exothermic)
a) C(s) + O2(g) ⟶ CO2(g) + 393.51 kJ
b) CH4(g) + 2O2(g) ⟶ CO2(g) + H2O(l) + 890.13 kJ
c) CaCO3(s) + 176 kJ ⟶ CaO(s) + CO2(g)
d) H2O(g) ⟶ H2O(l) + 44.02 kJ
Therefore, a reaction would be exothermic if the sum of a enthalpies of a reactants is higher than the enthalpies of a products. A reaction is endothermic if the enthalpy on the products side is higher.
Correct option is, A.
How can you determine whether a reaction seems to be endothermic or exothermic?Hence, a reaction is exothermic as well as its enthalpy will indeed be negative if it releases less energy than it takes in. See this as a certain quantity of heat evaporating from (or being removed from) the reaction. Endothermic reactions have positive enthalpies because they absorb or use more energy than they produce.
What does an exothermic vs. endothermic equation look like?Laundry detergent powder can be quickly exothermically reacted by being dissolved in a small amount of water in your hand. Dissolving potassium chloride (offered as a salt replacement) in water in your hand is one simple endothermic reaction.
To know more about enthalpy visit:
https://brainly.com/question/13996238
#SPJ1
2.37-l container is filled with 186 g argon. (a) if the pressure is 10.0 atm, what is the temperature? webassign will check your answer for the correct number of significant figures. k (b) if the temperature is 225 k, what is the pressure?
(a) If the pressure is 10.0 atm, the temperature is 62.0 K.
(b) if the temperature is 225 k, the pressure is 36.3 atm.
a) In order to calculate the temperature, we need to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume of the container, n is the number of moles of argon, R is the ideal gas constant, and T is the temperature.
We can calculate the number of moles, n, by using the molar mass of argon, which is 39.948 g/mol.
We have n = 186 g / 39.948 g/mol = 4.656 mol.
So we can plug in our values and solve for T:
T = (10.0 atm)(2.37 L) / (4.666 mol)(0.08206 L·atm/mol·K) = 62.0 K.
b) To calculate the pressure, we can again use the ideal gas law, PV = nRT. We know the values of n, R, and T from the previous question.
Since the volume of the container is given, we can plug in these values to solve for P:
P = (4.666 mol)(0.08206 L·atm/mol·K)(225 K) / 2.37 L = 36.3 atm.
Learn more about ideal gas law here: https://brainly.com/question/27870704.
#SPJ11
explain how you used your titration data to determine the volume of naoh used to reach the equivalence point of your titration. comment on the extent of agreement with the predicted volume you calculated above.g
To determine the volume of NaOH used to reach the equivalence point of the titration using the titration data, we need to find the point where the acid and base are neutralized.
At this point, the moles of acid and base are equal, and this is called the equivalence point.To find the volume of NaOH used at the equivalence point, we can use the following
Steps:1. Plot the titration data on a graph of pH versus volume of NaOH added.
Steps:2. Identify the point where the pH changes abruptly. This is the equivalence point.
Steps:3. Determine the volume of NaOH added at the equivalence point by reading the volume from the graph.
Steps:4. Compare the volume of NaOH used at the equivalence point of the titration with the predicted volume calculated above.The extent of agreement with the predicted volume can be assessed by calculating the percent error.
The percent error is calculated using the formula:
Percent error = [(experimental value - theoretical value) / theoretical value] x 100
If the percent error is small, then the agreement is good. If the percent error is large, then there is a significant difference between the predicted and experimental values.
Learn more about equivalence point of the titration here, https://brainly.com/question/31181892
#SPJ11
Explain how entropy would change in the process of flambeing (combustion of ethanol)
Entropy of the environment and the system (ethanol and oxygen being burned) both rise during the flambeating process. The second law of thermodynamics is in agreement with this increase in entropy.
How does combustion affect entropy?When a combustion reaction takes place, the system's entropy always goes up. Combustion processes must be spontaneous because of the interaction between an increase in entropy and a decrease in energy.
Is entropy increased by burning?A fire is exothermic, which means that it loses energy as heat is released into the surrounding space. As the bulk of a fire's byproducts are gases, such as carbon dioxide and water vapour, the system's entropy increases during the majority of combustion episodes.
To know more about thermodynamics visit:-
https://brainly.com/question/30207871
#SPJ1
what is the concentration of a 53.65 ml solution of hbr that is completely titrated by 33.50 ml of a 0.200 m naoh solution?
The concentration of the HBr solution is 0.125 M.
The given solution is a 53.65 ml solution of HBr that is completely titrated by 33.50 ml of a 0.200 M NaOH solution.
This implies that all of the HBr present in the solution is neutralized by NaOH, and therefore, the number of moles of HBr is equal to the number of moles of NaOH.
The balanced chemical equation for the reaction:HBr(aq) + NaOH(aq) → NaBr(aq) + H2O(l)The stoichiometric ratio of HBr to NaOH in this reaction is 1:1.
This means that one mole of HBr reacts with one mole of NaOH to form one mole of NaBr and one mole of water.
We can use the given information to determine the number of moles of NaOH that were required to neutralize the HBr. The molarity of the NaOH solution is given as 0.200 M.
This means that there are 0.200 moles of NaOH in every liter of solution.
Therefore, the number of moles of NaOH used in the titration is:moles of NaOH = molarity × volume in liters= 0.200 M × (33.50/1000) L= 0.0067 mol
Since the stoichiometric ratio of HBr to NaOH is 1:1, the number of moles of HBr that were neutralized by the NaOH is also 0.0067 mol.
This means that the concentration of the HBr solution can be calculated as follows:concentration of HBr = moles of HBr / volume of HBr solution in liters= 0.0067 mol / (53.65/1000) L= 0.125 M
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11