Structured business problem is being identified here. An organizational structure serves to facilitate the achievement of goals and objectives by the organization as well as the effective and efficient completion of tasks by personnel.
An organizational structure is a type of framework that specifies how certain tasks are to be find out in order to achieve the objectives of an organization. Obligations, rules, and roles may be a part of these activities. information is transferred across layers of the organization is likewise supervised by its organizational structure. The sole control, partnership, corporation, and S corporation are the four most popular business structures. workers will profit from structure because it'll give clarity, manage prospects, refine decision- timber, and ensure thickness. Organizational charts also delegate responsibility, streamline workflow, and guarantee the timely completion of crucial activities.
Learn more about structure here-
https://brainly.com/question/10730450
#SPJ4
Which of the following describes braking from a brake chamber containing a power spring?
A spring released and air-applied parking brake
A spring applied and air-released parking brake
A spring released and air-applied service brake
A spring applied and air-released service brake
The one that describes braking from a brake chamber containing a power spring is a spring applied and air-released service brake. The correct option is D.
What is spring brake?Spring brakes, unlike service brakes, are not air applied. They apply when air pressure is released from the brake chamber and release when air pressure is restored. Spring brakes and service brakes use different types of brake chambers.
The braking power of spring brakes is determined by how well the brakes are adjusted. If the brakes are not properly adjusted, neither the regular nor the emergency/parking brakes will function properly.
A spring applied and air-released service brake is the one that describes braking from a brake chamber containing a power spring.
Thus, the correct option is D.
For more details regarding spring brake, visit:
https://brainly.com/question/28099237
#SPJ1
if both the ram air input and drain hole of the pitot system become blocked, the indicated airspeed will
If both the ram air input and drain hole of the pitot system become blocked, the indicated airspeed will: a) increase during a climb.
What is a ram air input?A ram air input can be defined as an air intake system which is designed and developed to use the dynamic air pressure that is created due to vehicular motion, or ram pressure, in order to increase the static air pressure within the intake manifold of an internal combustion engine of an automobile.
This ultimately implies that, a ram air input allows a greater mass-flow of air through the engine of an automobile, thereby, increasing the engine's power.
In conclusion, indicated airspeed will increase during a climb when both the ram air input and drain hole of the pitot system become blocked.
Read more on pilots here: https://brainly.com/question/10381526
#SPJ1
Complete Question:
If both the ram air input and drain hole of the pitot system become blocked, the indicated airspeed will
a) increase during a climb
b) decrease during a climb
c) remain constant regardless of altitude change
thermal-hydraulic study of the lbe-cooled fuel assembly in the myrrha reactor: experiments and simulations
For many cutting-edge systems based on fast neutrons, heavy liquid metals (HLMs), such as lead-bismuth eutectic (LBE) and pure lead, are popular candidate coolants.
LBE is employed, in instance, in Mol (Belgiumgroundbreaking )'s MYRRHA fast reactor, which can run in either critical mode or as a sub-critical accelerator-driven system. Key thermal-hydraulic features of these systems, such as the proper cooling of fuel components, must be evaluated with a heavy emphasis on safety.
This flow scenario presents a challenge for computational fluid dynamics (CFD) models, such as those used to relate the turbulent transport of momentum and heat, due to the complicated geometry and low Prandtl number of the LBE (Pr 0.025). Therefore, accurate experimental information is required for validation.
Learn more about bismuth:
https://brainly.com/question/7622627
#SPJ4
The complete questions is ''what is the thermal-hydraulic study of the lbe-cooled fuel assembly in the myrrha reactor: experiments and simulations''.
When welding a T-joint, why should the arc be directed more toward the bottom workpiece?
When welding a T-joint, the reason that the arc need to be directed more toward the bottom workpiece is so that a person can hinder or stop any form of undercutting of the given top piece.
What is the ideal welding position for any joint?The Positioned flat of the flat position weld, often known as a "downhand" position, is the simplest and frequently the first weld that new pupils learn.
The welder places the metals to be welded flat and moves the electric arc across them while it travels across the workpiece in a way that is said to be an horizontal orientation.
Therefore, based on the above, When welding a T-joint, the reason that the arc need to be directed more toward the bottom workpiece is so that a person can hinder or stop any form of undercutting of the given top piece.
Learn more about welding from
https://brainly.com/question/9450571
#SPJ1
A box barge 65 m long and 12 m wide floats at a draught of 5.5 m in sea water. calculate: a) the displacement of the barge, b) its draught in fresh water.
The Displacement of the Barge whose length 65m and 12m wide- 4375.8 tonnes(a) and the Draught in Fresh Water- 5.61 m(b).
Let density of sea-water be- 1020kg/m3
Displacement of the barge= Density of sea water* Volume Displaced
=1020* (12*65*5.5)
=4375800 kg
=4375.8 tonnes
Let Density of Fresh Water- 1000kg/m3
Draught in Fresh Water= Density of sea water/Density of water *draught in sea water
1020/1000 *5.5
Draught in Fresh Water= 5.61 m
Learn more about Archimedes' Principle here:
https://brainly.com/question/787619
#SPJ4
iron(Fe) has a bcc crystal structure, an atomic radius of 0.124nm, and an atomic weight of 55.85g/mol. what is the theoretical density
Iron has a BCC crystal structure, an atomic radius of 0.124 nm and atomic weight of 55.85g/mol, so the theoretical density will be 7.8 g/cm³.
What is Atomic Radius?In a molecule, an atomic radius is equal to half the distance between neighboring atoms of the same element.
When we travel down a group, the atomic radius increases, and when we move in a period from left to right, it decreases. The valence electrons being in the same outermost shell at various times explains this. Moving from left to right, the atomic number rises during the same time interval, increasing the effective nuclear charge. Elemental atomic radius decreases as attractive forces rise.
The given values in the question are :
Radius=0.124 nm and,
Atomic weight=55.85 g/mol
For BCC, Z=2
r=0.124 nm=0.124×[tex]10^{-9}[/tex] m
=0.124×[tex]10^{-9}[/tex]×10² cm
ρ= (Z×M)/a³ N₀
a=4r/√3
=(2×55.85 g.[tex]mol^{-1}[/tex])/(4×0.124×[tex]10^{-7}[/tex]/√3)×6.022×[tex]10^{23}[/tex]
ρ=7.8 g/cm³.
Hence, we get the density as 7.8g/cm³.
To get more information about atomic radius :
https://brainly.com/question/13607061
#SPJ1
what are origin of elements
Explanation:
The origin of elements are÷ carbon,hydrogen and oxygen. i think soooo......✌
Who Can Help my assignment?
Answer:
me
Explanation:
Which of the following is not a characteristic of an external combustion engine?
A. External pistons are used.
B. Fuel is sent directly to the engine.
C. Boiler burns fuel to produce steam.
D. Steam is sent to the engine to produce power.
In Electronics engineering, what kind of board doesn't require solder?
Answer:
A bread board
Explanation:
It has identical holes where every component is connected using jumper wires
[tex]{}[/tex]
a must be correctly applied so that it is strong enough to hold the assembly and still not interfere with the finished welding.
A tack weld must be correctly applied so that it is strong enough to hold the assembly and still not interfere with the finished welding.
Who is wielding?A wielder can be defined as an individual who is saddled with responsibility of joining two or more metals together by wielding, especially through the use of an electrode or gas wielding method.
During the process of wielding, sparks and minute metallic objects are produced, which are usually hazardous to both the wielder and other workers within the vicinity.
In Mechanical Engineering, a tack weld should be correctly applied to the metals that are being wielded, so that they are strong enough to hold the assembly without interfering with the finished welding.
Read more on welding here: https://brainly.com/question/21049525
#SPJ1
Complete Question:
A ____ must be correctly applied so that it is strong enough to hold the assembly and still not interfere with the finished welding.
a-forged weld
b-stick weld
c-tack weld
d-rod weld
Describe the standard algorithm for finding the binary representation of a positive decimal integer
in English.
in pseudocode
Answer:
the perimeter of a square room is 48m. what is the area of the room? What cost will incur if the rate of carpeting the room is Rs. 10 per m square
In written specifications, under the heading Painting and Finishing, which of the following would not be appropriate?
A. Surfaces to be included (interior and exterior).
B. Specific cations of materials to be used.
C. Application method and number of coats.
D. Number of painters to be used on the job.
E. Guarantee of quality and performance.
F. Completion date.
Answer:
F. Completion date.
Explanation:
The completion date cannot be determined exactly before the job; it is also irrelevant to Painting and Finishing.
What error results if the curvature and refraction correction is neglected in trigonometric leveling for sights: (a) 3000 ft long (b) 1200 m long (c) 4500 ft long?
The error results if the curvature and refraction correction is neglected in trigonometric levelling for sights are
(a) 3000 ft long. = 0.1854 ft
(b) 1200 m long = 0.0972 m
(c) 4500 ft long = 0.4172 ft
What is levelling?This refers to the term in surveying used to describe taking measurements of heights with reference to a datum. Levelling is achieved using levelling instruments.
How to find the error results if the curvature and refraction correction is neglectedgiven data
(a) 3000 ft long
(b) 1200 m long
(c) 4500 ft long
(a) 3000 ft long
= 0.0206 * F^2
= 0.0206 * ( 3000 / 1000 )^2
= 0.0206 * ( 3 )^2
= 0.0206 * ( 9 )
= 0.1854 ft
(b) 1200 m long
= 0.0675 * K^2
= 0.0675 * ( 1200 / 1000 )^2
= 0.0675 * ( 1.2 )^2
= 0.0675 * ( 1.44 )
= 0.0972 m
(c) 4500 ft long
= 0.0206 * F^2
= 0.0206 * ( 4500 / 1000 )^2
= 0.0206 * ( 4.5 )^2
= 0.0206 * ( 20.25 )
= 0.4172 ft
Read more on corrections for curvature and refraction here: https://brainly.com/question/20820908
#SPJ1
How do I test the functionality of a semiconductor diode using a DMM
Answer:
• Dismount the diode from the circuit board (PCB or veroboard)
• Switch on the DMM and connect its positive (red) probe to anode terminal of a diode as well as a negative (black) probe to the cathode terminal.
• The DMM must be in parameters of continuity.
• If a beep sound is heard, the diode is functioning.
[tex]{}[/tex]
(5 points) Some strands of Christmas tree lights are sometimes wired in series. What happens to the other lights if one of the series bulbs is removed? Other lights are sometimes wired in parallel. What happens when one of these parallel bulbs is removed? Explain why
Answer:
Series: All the lights go out
Parallel: Nothing happens
Explanation:
Often referred to as ‘daisy-chained’ or ‘looped’ the current in a series circuit follows one path from start-to-finish with the Anode (positive) of the second LED connected to the Cathode (negative) of the first. The image to the right shows an example: To wire a series circuit like the one shown, the positive output from the driver connects to the positive of the first LED and from that LED a connection is made from the negative to the positive of the second LED and so on, until the last LED in the circuit. Finally, the last LED connection goes from the negative of the LED to the negative output of the constant current driver, creating a continuous loop or daisy chain. When one goes out, the whole strand of light stops working with it.
Parallel circuit (when lights are wired in parallel):
Where a series circuit receives the same current to each LED, a parallel circuit receives the same voltage to each LED and the total current to each LED is the total current output of the driver divided by the number of parallel LEDs.
In a parallel circuit all the positive connections are tied together and back to the positive output of the LED driver and all the negative connections are tied together and back to the negative output of the driver. Lets take a look at this in the image to the right. Using the example shown with a 1000mA output driver, each LED would receive 333mA; the total output of the driver (1000mA) divided by the number of parallel strings (3).
grade 5 bolts have __ identifying on the head
Grade 5 bolts have 3 marks identifying on the head
This is further explained below.
What are Grade 5 bolts?Generally, When looking for the correct bolt, it is essential to check that the grades of the bolts that are currently being used are compatible with one another.
There is no difference between Grade 5 Bolts and Metric.
8 Bolts. The presence of three marks on the head of a Grade 5 bolt is often all that is required for successfully identifying the bolt.
In conclusion, The head of a grade 5 bolt will have three distinguishing markings on it.
Read more about Grade 5 bolts
https://brainly.com/question/14900098
#SPJ1
PHOTOGRAPHY-Sarah is developing a black-and-white photograph. At what ratio should she mix the fixer solution? OA. 1:4 О в. 1-2 OD. 1:10
Since Sarah is developing a black-and-white photograph. The ratio that she should mix the fixer solution is option B. 1-2.
Which aspect ratio ought to be applied?The kind of project you're shooting will determine the appropriate aspect ratio to utilize. As a starting point, we advise utilizing 16:9 for films as well as 4:3 for images.
There is no way to go wrong with either of them because this is a good common standard.
One do advise that a person can experiment with various aspect ratios as you acquire experience and wish to try more artistic photos. This can give your content a completely new perspective.
Therefore, Since Sarah is developing a black-and-white photograph. The ratio that she should mix the fixer solution is option B. 1-2.
Learn more about photograph from
https://brainly.com/question/11324677
#SPJ1
A dashed line with an “S” designates a(n) ____
Hi there,
I hope you and your family are staying safe and healthy!
A dashed line with an S designates an Underfloor signal raceway.
All the best this semester!
~Garebear
Hello,
Can someone solve this short exercise please. Only the calculation parts (a and c)
a) From the the given data:
The 2020 GDP / capita for Ni is 1.94
The 2020 GDP / capita for United States is 63.23
The equivalent CO2 emissions per equivalent US$ of GDP for Ni/geria
is 1.265
The equivalent CO2 emissions per equivalent US$ of GDP for United States is 0.218
c) From the typical trend predictions, the equivalent CO2 emission per equivalent US$ for the year 2035 is 513.59 T g C / yr
How to find the GDP per capitaGDP per capita is solved by gross domestic product GDP divided by population
GDP per capita for Ni/geria
= 400 / 206
= 1.94
GDP per capita for United States
= 20930 / 331
= 63.23
How to find equivalent CO2 emissions per equivalent US$ of GDPEquivalent CO2 emissions per equivalent US$ of GDP is gotten by
= CO2 emissions / GDP
Ni/geria
= 506 / 400
= 1.265
United States
= 4570 / 20930
= 0.218
How to compute equivalent CO2 emission per equivalent US$ for the year 2035 for Ni/geriaGiven that CO2 increment per year is 0.1% / yr. From 2020 to 2035 is 15 years and this shows increment of 15 * 0.1 = 1.5%
At 2020 it was 506 Tg C / yr with 1.5% increment we have
= 506 * 1.5%
= 7.59
The increment is 506 + 7.59 = 513.59 Tg C / yr
Therefore the equivalent CO2 emission per equivalent US$ for the year 2035 is 513.59 Tg C / yr
Read more on GDP per capita here: https://brainly.com/question/18414212
#SPJ1
technician a says that gasoline engines have spark plugs to ignite the air-fuel mixture.technician b says that diesel engines use compression to ignite the air-fuel mixture. who iscorrect?
It is right to state that Technician B is correct. A piston compresses the air in the cylinder, causing it to become very hot. The diesel is then atomized in the injectors and sprayed into the heated air as a mist. The heated air ignites the gasoline quickly, creating ignition.
What is compression in Engines?As the fuel injectors drive air and fuel into the combustion chamber, compression occurs in the internal combustion cylinders.
The mixture ignites, and the piston is driven by the expansion of the burning gases in the cylinders, converting the energy from combustion into mechanical energy that propels the vehicle.
Learn more about Piston Compression:
https://brainly.com/question/10072505
#SPJ1
what is 4+12 if 4=4 and 12=12?
Answer:
16
Explanation: