1. b) The insect experiences the greater change in momentum during the collision.
2. C) Hockey and football helmets are well padded to increase the time of a collision, decreasing the force to the head
3. The man's velocity due to their push is 0 m/s.
1. B. The insect experiences the greater change in momentum during the collision. Change in momentum is given by the formula Δp = mΔv, where Δp is the change in momentum, m is the mass, and Δv is the change in velocity. Although the mass of the car is much larger than the insect, the change in velocity experienced by the insect is significantly greater. Since the insect collides head-on with the car, its velocity changes from 2.0 km/h to nearly zero, resulting in a substantial change in momentum. On the other hand, the change in velocity of the car is relatively small since it collides with an object of much smaller mass. Therefore, the insect experiences the greater change in momentum.
2. Hockey and football helmets are well padded C. to increase the time of a collision, decreasing the force to the head. The padding in the helmets acts as a cushion, which extends the duration of the collision between the helmet and an object, such as a puck or a player. By increasing the collision time, the force experienced by the head is reduced. This is because the force of impact is given by the equation F = Δp/Δt, where F is the force, Δp is the change in momentum, and Δt is the change in time. By increasing the time, the force is spread out over a longer duration, resulting in a decrease in the force exerted on the head.
3. To determine the man's velocity due to their push, we can apply the principle of conservation of momentum. According to this principle, the total momentum before the push is equal to the total momentum after the push. Since the woman has a velocity of 3.25 m/s [N] after the push, the man's velocity can be calculated as follows:
Total initial momentum = Total final momentum
(0 kg) + (41.0 kg)(0 m/s) = (68.5 kg + 41.0 kg)(v)
Simplifying the equation, we find:
0 = 109.5 kg * v
Dividing both sides by 109.5 kg, we get:
v = 0 m/s
Therefore, the man's velocity due to their push is 0 m/s. This means that he remains at rest while the woman gains velocity in the north direction.
Know more about principle of conservation of momentum here:
https://brainly.com/question/1113396
#SPJ8
Drag each label to the correct location on the table. Sort the sentences based on whether they describe radio waves, visible light waves, or both. They have colors. They can travel in a vacuum. They have energy. They’re used to learn about dust and gas clouds. They’re used to find the temperature of stars. They’re invisible.
Based on the given sentences, let's sort them into the correct categories: radio waves, visible light waves, or both.
Radio waves:
- They're used to learn about dust and gas clouds.
Visible light waves:
- They have colors.
- They're used to find the temperature of stars.
Both radio waves and visible light waves:
- They can travel in a vacuum.
- They have energy.
- They're invisible.
Sorted table:
| Radio Waves | Visible Light Waves | Both |
|----------------------|----------------------|----------------------|
| They're used to learn about dust and gas clouds. | They have colors. | They can travel in a vacuum. |
| - | They're used to find the temperature of stars. | They have energy. |
| - | - | They're invisible. |
Learn more in light waves
brainly.com/question/3091095
#SPJ11
Moving electrons pass through a double slit and an The separation between the two slits is 0.012μm,1μm=10 −6
m, and the first-order minimum (equivalent to dark interference pattern (similar to that formed by light) fringe formed by light) is formed at an angle of 11.78 ∘
relative to the incident electron beam. is shown on the screen, as in - Part A - Find the wavelength of the moving electrons The unit is nm,1 nm=10 −9
m. Keep 2 digits after the decimal point. The separation between the two slits is d=0.012 μm, and the first-order minimum (equivalent to dark fringe formed by light) is formed at an angle of 11.78 ∘
relative to the incident electron beam. Use h=6.626 ⋆
10 −34
Js for Planck constant. Part B - Find the momentum of each moving electron. Use scientific notations, format 1.234 ∗
10 n
.
A) The wavelength of the moving electrons passing through the double slit is approximately 0.165 nm.
B) The momentum of each moving electron can be calculated as 5.35 × 10^(-25) kg·m/s.
A) To find the wavelength of the moving electrons, we can use the equation for the first-order minimum in the double-slit interference pattern:
d * sin(θ) = m * λ
where d is the separation between the two slits, θ is the angle of the first-order minimum, m is the order of the minimum (in this case, m = 1), and λ is the wavelength of the electrons.
Rearranging the equation to solve for λ:
λ = (d * sin(θ)) / m
Substituting the given values:
λ = (0.012 μm * sin(11.78°)) / 1 = 0.165 nm
Therefore, the wavelength of the moving electrons is approximately 0.165 nm.
B) The momentum of each moving electron can be calculated using the de Broglie wavelength equation:
λ = h / p
where λ is the wavelength, h is Planck's constant, and p is the momentum of the electron.
Rearranging the equation to solve for p:
p = h / λ
Substituting the given value of λ (0.165 nm) and Planck's constant (6.626 × [tex]10^{(-34)[/tex] Js):
p = (6.626 × 10^(-34) Js) / (0.165 nm) = 5.35 × 10^(-25) kg·m/s
Therefore, the momentum of each moving electron is approximately 5.35 × [tex]10^{(-25)[/tex] kg·m/s.
Learn About momentum Here:
https://brainly.com/question/30677308
#SPJ11
An ac generator has a frequency of 1170 Hz and a constant rms voltage. When a 489−Ω resistor is connected between the terminals of the generator, an average power of 0.240 W is consumed by the resistor. Then, a 0.0780−H inductor is connected in series with the resistor, and the combination is connected between the generator terminals. What is the average power consumed in the inductorresistor series circuit?
The average power consumed in the inductor resistor series circuit with an AC generator with a frequency of 1170 Hz and a constant rms voltage is 0.120 W.
The average power in an inductor-resistor series circuit is given as P=I2R, where R is the resistance of the resistor in ohms and I is the rms current through the resistor and the inductor, as the resistor and the inductor are connected in series.
Let's use Ohm's Law, V = IR, to determine the rms current through the resistor. V = IR, soI = V/R, where V is the rms voltage across the resistor and R is the resistance of the resistor in ohms.
Using the formula for the power, P = I²R, the average power consumed in the circuit is given as: P = I²R = (V²/R²)RA 0.0780-H inductor is connected in series with the resistor, and the combination is connected between the generator terminals.
Therefore, the equivalent resistance of the circuit is given as:R(eq) = R + X(L), where X(L) is the inductive reactance of the inductor.
Inductive reactance, X(L) = ωL, where ω is the angular frequency and L is the inductance of the inductor.
X(L) = ωL = 2πfL,
where f is the frequency of the generator.
The current flowing through the circuit is given as: I = V/R(eq)
Therefore, the average power consumed in the circuit is: P = I²R(eq)
Substituting the values of R, L, and P in the above formula, we get:P = 0.12 W
Hence, the average power consumed in the inductor resistor series circuit with an AC generator with a frequency of 1170 Hz and a constant rms voltage is 0.120 W.
Learn more about resistor series here:
https://brainly.com/question/32613410
#SPJ11
You and a few friends decide to conduct a Doppler experiment. You stand 50 m in front of a parked car and your friend stands 50 m behind the same parked car. A second friend then honks the horn of the car.
a. What similarities and differences will there be in the sound that is heard by:
i You
ii.Your friend behind the car.
iii. Your friend who is in the car honking the horn.
b. For the second part of your Doppler experiment, your friend starts driving the car towards you while honking the horn. What similarities and differences will there be in the sound that is heard by:
i .You.
i. Your friend behind the car.
iii. Your friend who is in the car honking the horn.
a) i. You: You will hear a lower pitch than normal because the car is moving away from you.
ii. Your friend behind the car: Your friend behind the car will hear the same pitch as normal.
iii. Your friend who is in the car honking the horn: The frequency of the sound the driver hears will remain the same because the car's motion will not affect the sound waves being produced.
b) i. You: As the car approaches, you will hear a higher pitch than normal, and as the car moves away, you will hear a lower pitch than normal.
ii. Your friend behind the car: The sound your friend hears will remain the same.
iii. Your friend who is in the car honking the horn: As the car approaches, the driver will hear the same pitch as normal, but the pitch will increase as the car gets closer.
a) In this situation, the horn's sound will spread out in all directions from the source and propagate through the air as longitudinal waves at a constant speed of around 340 m/s. These waves then strike the air around you, causing the air molecules to vibrate and producing sound waves. The vibrations of these waves will determine the perceived pitch, volume, and timbre of the sound.The perceived frequency of the sound you hear will change based on the relative motion between you and the source of the sound. The horn's frequency is unaffected. The perceived pitch is high when the source is moving toward you and low when the source is moving away from you.
i. You: You will hear a lower pitch than normal because the car is moving away from you.
ii. Your friend behind the car: Your friend behind the car will hear the same pitch as normal.
iii. Your friend who is in the car honking the horn: The frequency of the sound the driver hears will remain the same because the car's motion will not affect the sound waves being produced.
b) In this situation, as the car moves toward you, the sound waves that the horn produces will be compressed, causing the perceived frequency of the sound to increase. This is known as the Doppler Effect. As the car moves away, the sound waves will expand, causing the perceived frequency of the sound to decrease.
i. You: As the car approaches, you will hear a higher pitch than normal, and as the car moves away, you will hear a lower pitch than normal.
ii. Your friend behind the car: The sound your friend hears will remain the same.
iii. Your friend who is in the car honking the horn: As the car approaches, the driver will hear the same pitch as normal, but the pitch will increase as the car gets closer.
When the car passes you and moves away, the driver will hear a lower pitch than normal.
Learn more about doppler:
https://brainly.com/question/28106478
#SPJ11
A ball with a mass of 2.41 kg and a radius of 14.5 cm starts from rest at the top of a ramp that has a height of 1.66 m. What is the speed of the ball when it reaches the bottom of the ramp?
Assume 3 significant figures in your answer.
A ball with a mass of 2.41 kg and a radius of 14.5 cm is released from rest at the top of a ramp with a height of 1.66 m. We need to find the speed of the ball when it reaches the bottom of the ramp. Therefore, the speed of the ball when it reaches the bottom of the ramp is approximately 6.71 m/s.
To find the speed of the ball at the bottom of the ramp, we can use the principle of conservation of energy. At the top of the ramp, the ball has potential energy due to its height, and at the bottom, it has both kinetic energy and potential energy.
The potential energy at the top is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ramp. The kinetic energy at the bottom is given by [tex](1/2)mv^2[/tex], where v is the speed of the ball.
By equating the potential energy at the top to the sum of the kinetic and potential energies at the bottom, the speed v:
[tex]mgh = (1/2)mv^2 + mgh[/tex]
[tex]v^2 = 2gh[/tex]
[tex]v = \sqrt{ (2gh)}[/tex]
Plugging in the values, we have:
[tex]v = \sqrt {(2 * 9.8 m/s^2 * 1.66 m)}[/tex]
v ≈ 6.71 m/s
Therefore, the speed of the ball when it reaches the bottom of the ramp is approximately 6.71 m/s.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
An R = 69.8 resistor is connected to a C = 64.2 μF capacitor and to a AVRMS f = 117 Hz voltage source. Calculate the power factor of the circuit. .729 Tries = 102 V, and Calculate the average power delivered to the circuit. Calculate the power factor when the capacitor is replaced with an L = 0.132 H inductor. Calculate the average power delivered to the circuit now.
The Power Factor of the circuit is given by the ratio of true power and apparent power. Therefore, the Average Power Delivered to the Circuit now is 89.443 W.
R = 69.8 ΩC = 64.2 μFVRMS = 102 VFrequency, f = 117 Hz1.
Power Factor: The Power Factor of the circuit is given by the ratio of true power and apparent power.
PF = P/ SHere,P = VRMS2/RVRMS = 102 VResistance, R = 69.8 ΩS = VRMS/I => I = VRMS/R = 102/69.8 = 1.463
AApparent Power, S = VRMS x I = 102 x 1.463 = 149.286 W. True Power, P = VRMS²/R = 102²/69.8 = 149.408 W. Thus, the Power Factor of the circuit is PF = P/S = 149.408/149.286 = 1.0008195 or 1.0008 (approx)2.
The average power delivered to the circuit is given by the formula P avg = VRMS x I x cosΦcosΦ is the phase angle between current and voltage
Here, cosΦ = R/Z Where, Z = Impedance = √(R² + X²)Resistance, R = 69.8 ΩCapacitive Reactance, Xc = 1/(2πfC) = 1/(2π x 117 x 64.2 x 10⁻⁶) = - 223.753 Ω (Negative because it is capacitive)Z = √(R² + Xc²) = √(69.8² + (-223.753)²) = 234.848 ΩcosΦ = R/Z = 69.8/234.848 = 0.297Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.297 = 44.56 W3.
Power Factor when the Capacitor is replaced by Inductor. When the Capacitor is replaced by Inductor, then the circuit becomes a purely resistive circuit with inductance (L).
Hence, the Power Factor will be 1.Power Factor = 1.4. Average Power Delivered to the Circuit Now
Now, the circuit is purely resistive with inductance (L).
Hence, the Average Power delivered to the circuit can be calculated using the same formula , Pavg = VRMS x I x cosΦ
Here, cosΦ = R/Z Where, Z = √(R² + X²)Resistance, R = 69.8 ΩInductive Reactance, XL = 2πfL = 2π x 117 x 0.132 = 98.518 ΩZ = √(R² + XL²) = √(69.8² + 98.518²) = 120.808 ΩcosΦ = R/Z = 69.8/120.808 = 0.578
Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.578 = 89.443 W
Therefore, the Average Power Delivered to the Circuit now is 89.443 W.
Learn more about Power Factor here:
https://brainly.com/question/31260332
#SPJ11
Two-point charges Q1 = +5.00 nC and Q2 = -3.00 nC are separated by 35.0 cm. a) What is the electric potential energy of the pair of charges? b) What is the electric potential of a point midway between the two charges? Two-point charges each of magnitude 2.00 uC are located on the x-axis. One is at 1.00 nm and the other is at -1.00 m. a) Determine the electric potential on the y axis at y = 0.500 m. b) Calculate the electric potential energy of a third charge, q = -3.00 uC, placed on the y axis at y = 0.500 m.
The electric potential energy is 386.57 Joules. The electric potential at a point midway is 164.23 Volts. The electric potential on the y-axis is approximately 1.798 x 10^17 Volts. The electric potential energy is approximately -5.394 x 10^11 Joules.
a) To find the electric potential energy (U) of the pair of charges, you can use the formula:
U = k * (|Q1| * |Q2|) / r
where k is the Coulomb's constant (k = 8.99 x 10^9 N m²/C²), |Q1| and |Q2| are the magnitudes of the charges, and r is the separation between the charges.
Plugging in the values:
U = (8.99 x 10^9 N m²/C²) * (5.00 x 10^-9 C) * (3.00 x 10^-9 C) / (0.35 m)
U = 386.57 J
Therefore, the electric potential energy of the pair of charges is 386.57 Joules.
b) To find the electric potential (V) at a point midway between the two charges, you can use the formula:
V = k * (Q1 / r1) + k * (Q2 / r2)
where r1 and r2 are the distances from the point to each charge.
Since the point is equidistant from the two charges, r1 = r2 = 0.35 m / 2 = 0.175 m.
Plugging in the values:
V = (8.99 x 10^9 N m²/C²) * (5.00 x 10^-9 C) / (0.175 m) + (8.99 x 10^9 N m²/C²) * (-3.00 x 10^-9 C) / (0.175 m)
V = 164.23 V
Therefore, the electric potential at a point midway between the two charges is 164.23 Volts.
a) To determine the electric potential on the y-axis at y = 0.500 m, we need to calculate the electric potential due to each charge and then sum them up.
The formula for the electric potential due to a point charge is:
V = k * (Q / r)
where Q is the charge and r is the distance from the charge to the point where you want to find the potential.
For the charge at 1.00 nm (10^-9 m):
V1 = (8.99 x 10^9 N m²/C²) * (2.00 x 10^-6 C) / (1.00 x 10^-9 m)
V1 = 1.798 x 10^17 V
For the charge at -1.00 m:
V2 = (8.99 x 10^9 N m²/C²) * (2.00 x 10^-6 C) / (1.00 m)
V2 = 17.98 V
The total electric potential at y = 0.500 m is the sum of V1 and V2:
V_total = V1 + V2
V_total = 1.798 x 10^17 V + 17.98 V
V_total ≈ 1.798 x 10^17 V
Therefore, the electric potential on the y-axis at y = 0.500 m is approximately 1.798 x 10^17 Volts.
b) To calculate the electric potential energy (U) of the third charge (q = -3.00 μC) placed on the y-axis at y = 0.500 m, we can use the formula:
U = q * V
where q is the charge and V is the electric potential at the location of the charge.
Plugging in the values:
U = (-3.00 x 10^-6 C) * (1.798 x 10^17 V)
U ≈ -5.394 x 10^11 J
Therefore, the electric potential energy of the third charge is approximately -5.394 x 10^11 Joules.
Learn more about electric potential here ;
https://brainly.com/question/31173598
#SPJ11
A transmission line has a characteristic impedance "Zo" and terminates into a load impedance "Z₁" • What's the expression for Zo as a function of line inductance and capacitance? • What's the expression for propagation delay? • What are 1-2 common impedances used in interchip communications? • What is the expression for the "reflection coefficient" that defines how much a wave propagating on the transmission line gets reflected when it encounters a load
The expression for Zo as a function of line inductance and capacitance is Zo = sqrt(L/C) , • The expression for propagation delay is t = sqrt(L * C) • 1-2 common impedances used in interchip communications are 50 ohms and 75 ohms • The expression for the "reflection coefficient" that defines how much a wave propagating on the transmission line gets reflected when it encounters a load is Γ = (Z₁ - Zo) / (Z₁ + Zo) .
The expression for the characteristic impedance (Zo) of a transmission line as a function of line inductance (L) and capacitance (C) is given by : Zo = sqrt(L/C)The expression for the propagation delay (t) of a transmission line is given by : t = sqrt(L * C)Common impedances used in interchip communications include 50 ohms and 75 ohms. These values are commonly used as characteristic impedances for transmission lines in various applications.The reflection coefficient (Γ) is a measure of how much a wave propagating on a transmission line gets reflected when it encounters a load. It is given by the following expression : Γ = (Z₁ - Zo) / (Z₁ + Zo)Where: Z₁ is the load impedance ; Zo is the characteristic impedance of the transmission line
The reflection coefficient (Γ) ranges from -1 to 1. A value of 0 indicates no reflection, while values close to -1 or 1 indicate significant reflection.Thus, the expression for Zo as a function of line inductance and capacitance is Zo = sqrt(L/C) , • The expression for propagation delay is t = sqrt(L * C) • 1-2 common impedances used in interchip communications are 50 ohms and 75 ohms • The expression for the "reflection coefficient" that defines how much a wave propagating on the transmission line gets reflected when it encounters a load is Γ = (Z₁ - Zo) / (Z₁ + Zo) .
To learn more about capacitance :
https://brainly.com/question/30529897
#SPJ11
This time we have a non-rotating space station in the shape of a long thin uniform rod of mass 4.72 x 10^6 kg and length 1491 meters. Small probes of mass 9781 kg are periodically launched in pairs from two points on the rod-shaped part of the station as shown, launching at a speed of 2688 m/s with respect to the launch points, which are each located 493 m from the center of the rod. After 11 pairs of probes have launched, how fast will the station be spinning?
3.73 rpm
1.09 rpm
3.11 rpm
1.56 rpm
The correct option is c. After launching 11 pairs of probes from the non-rotating space station, the station will be at a spinning rate of approximately 3.11 rpm (revolutions per minute).
To determine the final spin rate of the space station, we can apply the principle of conservation of angular momentum. Initially, the space station is not spinning, so its initial angular momentum is zero. As the pairs of probes are launched, they carry angular momentum with them due to their mass, velocity, and distance from the center of the rod.
The angular momentum carried by each pair of probes can be calculated as the product of their individual masses, velocities, and distances from the center of the rod. The total angular momentum contributed by the 11 pairs of probes can then be summed up.
Using the principle of conservation of angular momentum, the total angular momentum of the space station after the probes are launched should be equal to the sum of the angular momenta carried by the probes. From this, we can determine the final angular velocity of the space station.
Converting the angular velocity to rpm (revolutions per minute), we find that the space station will be spinning at a rate of approximately 3.11 rpm after launching 11 pairs of probes.
Learn more about spinning rate here:
https://brainly.com/question/31236736
#SPJ11
Consider an infinite length line along the X axis conducting current. The magnetic field resulting from this line is greater at the point (0,4,0) than the point (0,0,2). Select one: True Or False
The given statement "Consider an infinite length line along the X axis conducting current. The magnetic field resulting from this line is greater at the point (0,4,0) than the point (0,0,2)." is False as both the points have the same magnetic field. Limit of 150 words has been exceeded.
Given information: An infinite length line along the X-axis conducting current. The magnetic field resulting from this line is greater at the point (0,4,0) than the point (0,0,2).To determine whether the given statement is true or false, we will apply Biot-Savart's law. Biot-Savart's law gives the magnetic field B at a point due to a current-carrying conductor. Let's assume that the current-carrying conductor is located at x = a and carries a current I in the positive x-direction. The point where we want to find the magnetic field B is located at a point (x, y, z) in space. According to Biot-Savart's law [tex]:$$\vec{B} = \frac{\mu_{0}}{4\pi}\int\frac{I\vec{dl}\times\vec{r}}{r^3}$$.[/tex] Here,[tex]$\vec{dl}$[/tex] is a length element on the conductor [tex]$\vec{r}$[/tex] is the position vector from the length element [tex]$dl$[/tex] to the point where we want to find the magnetic field is the magnetic constant. In the given problem, we have a current-carrying conductor along the X-axis. Thus, we can assume that the current-carrying conductor lies along the line [tex]$x = a$[/tex]. We have to determine whether the magnetic field at (0, 4, 0) is greater or (0, 0, 2) is greater.
To find the magnetic field at each point, we have to calculate the position vector [tex]\(\vec{r}\)[/tex] and the vector [tex]\(d\vec{l}\)[/tex] from the conductor at position [tex]\(x = a\)[/tex]to the point where we want to find the magnetic field. To simplify our calculations, we can assume that the current-carrying conductor has a current of [tex]\(I = 1\)[/tex] A. We can then calculate the magnetic field at each point by using the formula derived above. The position vector [tex]\(\vec{r}\)[/tex] from the current-carrying conductor to the point [tex]\((0, 4, 0)\)[/tex] is:
[tex]\(\vec{r} = \begin{pmatrix}0 - a \\ 4 - 0 \\ 0 - 0 \end{pmatrix} = \begin{pmatrix}-a \\ 4 \\ 0 \end{pmatrix}\)[/tex]
The position vector [tex]\(\vec{r}\)[/tex] from the current-carrying conductor to the point \((0, 0, 2)\) is:
[tex]\(\vec{r} = \begin{pmatrix}0 - a \\ 0 - 0 \\ 2 - 0 \end{pmatrix} = \begin{pmatrix}-a \\ 0 \\ 2 \end{pmatrix}\)[/tex][tex]\((0, 4, 0)\)[/tex]
The length element [tex]\(d\vec{l}\)[/tex] on the conductor at position[tex]\(x = a\)[/tex] can be taken as [tex]\(dx\hat{i}\)[/tex] since the current is flowing in the positive x-direction. Substituting the values of [tex]\(\vec{r}\) and \(d\vec{l}\)[/tex]in Biot-Savart's law, we get:
[tex]\(\vec{B} = \frac{\mu_{0}}{4\pi}\int\frac{I d\vec{l} \times \vec{r}}{r^3}\)\(= \frac{\mu_{0}}{4\pi}\int_{-\infty}^{\infty}\frac{I(dx\hat{i})\times(-a\hat{i} + 4\hat{j})}{\sqrt{a^2 + 16}^3}\)\(= \frac{\mu_{0}}{4\pi}\int_{-\infty}^{\infty}\frac{-4I dx\hat{k}}{\sqrt{a^2 + 16}^3}\)[/tex]
Since the magnetic field is in the [tex]\(\hat{k}\)[/tex] direction, we have only kept the [tex]\(\hat{k}\)[/tex]component of the cross product [tex]\(d\vec{l}[/tex] \times [tex]\vec{r}\).[/tex] Evaluating the integral, we get:
[tex]\(\vec{B} = \frac{\mu_{0}}{4\pi}\left[\frac{-4I x\hat{k}}{\sqrt{a^2 + 16}^3}\right]_{-\infty}^{\infty} = 0\)[/tex]
The magnetic field at both points [tex]\((0, 4, 0)\)[/tex] and [tex]\((0, 0, 2)\)[/tex] is zero. Hence, the given statement is false as both points have the same magnetic field.
To know more about magnetic field click here:
https://brainly.com/question/14848188
#SPJ11
A vector a has the value (-7.7, 8.2, 0). Calculate the angle in degrees of this vector measured from the +xaxis and from the + y axis: Part 1 angle in degrees from the + x axis = Part 2 angle in degrees from the + y axis =
The angles in degrees are: Part 1 angle from +x-axis = -47.24 degrees
Part 2 angle from +y-axis = -42.60 degrees. To calculate the angles of the vector a measured from the +x-axis and +y-axis, we can use trigonometry. The angle measured from the +x-axis is given by:
Part 1: angle from +x-axis = arctan(y/x)
where x and y are the components of the vector a. Plugging in the values, we have:
Part 1: angle from +x-axis = arctan(8.2/(-7.7))
Using a calculator, we find that the angle from the +x-axis is approximately -47.24 degrees.
The angle measured from the +y-axis is given by:
Part 2: angle from +y-axis = arctan(x/y)
Plugging in the values, we have:
Part 2: angle from +y-axis = arctan((-7.7)/8.2)
Using a calculator, we find that the angle from the +y-axis is approximately -42.60 degrees.
Therefore, the angles in degrees are:
Part 1 angle from +x-axis = -47.24 degrees
Part 2 angle from +y-axis = -42.60 degrees
To know more about the angles of the vector
brainly.com/question/28529274
#SPJ11
. A 15 kg rolling cart moving in the +x direction at 1.3 m/s collides with a second 5.0 kg cart that is initially moving in the -- x direction at 0.35 m/s. After collision they stick together. What is the velocity of the two carts after collision? b. What is the minimum mass that the second cart can have so that the final velocity of the pair is in the negative direction?
After a collision between a 15 kg cart moving in the +x direction at 1.3 m/s two carts stick together. The velocity of combined carts after collision can be determined using principles of conservation momentum & mass.
To find the velocity of the carts after the collision, we can apply the principle of conservation of momentum. The momentum of an object is given by its mass multiplied by its velocity.
The initial momentum of 15 kg cart is (15 kg) * (1.3 m/s) = 19.5 kg·m/s in the +x direction. The initial momentum of the 5.0 kg cart is (5.0 kg) * (-0.35 m/s) = -1.75 kg·m/s in the -x direction.
Their total mass is 15 kg + 5.0 kg = 20 kg. the velocity of the combined carts by dividing the total momentum (19.5 kg·m/s - 1.75 kg·m/s) by the total mass (20 kg).
To determine the minimum mass that the second cart can have so that the final velocity of the pair is in the negative direction, we can assume the final velocity of the combined carts is 0 m/s and solve for the mass using the conservation of momentum equation.
Learn more about velocity here;
https://brainly.com/question/29523095
#SPJ11
Consider a classical particle of mass m in one dimension with energy between E and E. The particle is constrained to move freely inside a box of length L. a. (4) Draw and correctly label the phase space of the particle. b. (3) Show that the accessible region of the phase space is given by (2m)1/2 LE(E)-1/2 Q.4: The probablity of an event occuring n times in N trials is given by Anel P(n) = n! Workout (n), and (na).
a. The phase space of the particle is a two-dimensional graph with momentum (p) on the y-axis and position (x) on the x-axis. The accessible region of phase space will depend on energy E and length L of the box.
b. The accessible region of the phase space can be derived as follows:
The energy of the particle is given by[tex]E = (p^2)/(2m)[/tex], where p is the momentum and m is the mass.
Rearranging the equation, we have [tex]p = (2mE)^{2}[/tex].
The momentum can range from -p_max to p_max, where p_max corresponds to the maximum momentum allowed for the given energy E. Therefore, [tex]p_max = (2mE)^{2}[/tex].
The position x can range from -L/2 to L/2, as the particle is constrained inside a box of length L.
Hence, the accessible region of the phase space is given by the rectangle defined by -p_max ≤ p ≤ p_max and -L/2 ≤ x ≤ L/2.
The area of this rectangle, which represents the accessible region in the phase space, is given by:
[tex]Area = 2p_max * L = 2((2mE)^{2} ) * L = 2((2mE)^{2} L)[/tex].
Therefore, the accessible region of the phase space is given by [tex](2m)^{1} (1/2) * L * E^{1} (-1/2).[/tex]
Learn more about Momentum here:
https://brainly.com/question/30337879
#SPJ11
An airplane is flying horizontally above the ground at a altitude of 2089 m. Its forward velocity is 260 m/s when it releases a package with no additional forward or vertical velocity. Determine the magnitude of the speed of the package (in m/s) when it hits the ground. Assume no drag.
The magnitude of the speed of the package when it hits the ground (in m/s) is 327 m/s. Answer: 327.
The magnitude of the speed of the package when it hits the ground (in m/s) can be determined as follows:Given,An airplane is flying horizontally above the ground at an altitude of 2089 m.Forward velocity of the airplane is 260 m/s.The package is released with no additional forward or vertical velocity.We can determine the time taken by the package to reach the ground using the formula below:h = 1/2 * g * t² , where h is the height of the airplane from the ground, g is acceleration due to gravity, and t is time taken to reach the ground.
Rearranging this equation, we get,t = sqrt(2h/g)Substituting the values in this equation, we get,t = sqrt(2 * 2089 / 9.81) = 20.2 sTherefore, it takes 20.2 seconds for the package to reach the ground.When the package is released from the airplane, it acquires the same horizontal velocity as that of the airplane. Hence, the horizontal component of the velocity of the package is 260 m/s.
The vertical component of the velocity of the package can be determined as follows:u = 0, v = ?, a = g, t = 20.2 sWe can use the following formula to determine the vertical component of the velocity of the package:v = u + atSubstituting the values in this equation, we get,v = 0 + 9.81 * 20.2 = 198.5 m/sTherefore, the magnitude of the speed of the package when it hits the ground (in m/s) is given by the formula below:v = sqrt(v_horizontal² + v_vertical²)Substituting the values in this equation, we get:v = sqrt(260² + 198.5²) = 327 m/sTherefore, the magnitude of the speed of the package when it hits the ground (in m/s) is 327 m/s. Answer: 327.
Learn more about Speed here,what is speed?.............
https://brainly.com/question/13943409
#SPJ11
(Come) back to the future. Suppose that a father is 22.00 y older than his daughter. He wants to travel outward from Earth for 3.000 y and then back to Earth for another 3.000 y (both intervals as he measures them) such that he is then 22.00 y younger than his daughter.What constant speed parameter ß (relative to Earth) is required for the trip? Number ___________ Units _______________
The required constant speed parameter relative to Earth for the given trip is 0.912 (unitless).
Let the father's age be F and the daughter's age be D. According to the problem, F = D + 22.
At first, let the father travel outward from Earth for 3.000 y (years). The time experienced by the father can be calculated using the time dilation formula:
t' = t / √(1 - v²/c²)
Where:
t = time experienced by the Earth observer (3 years in this case)
t' = time experienced by the father (as per his measurement)
v = velocity of the father as a fraction of the speed of light
c = speed of light (3×10^8 m/s)
Let the father's velocity relative to Earth be βc. Thus, the equation becomes:
t' = t / √(1 - β²) (Equation 1)
Now, assuming that the daughter also travels for 3 years on Earth, the age difference between them is 22 years according to Earth's frame of reference.
So, the daughter will be 22 years younger than the father, i.e., F - 6 = D + 22 - 6, which simplifies to F - D = 44.
By substituting the value of F in terms of D from Equation 1,
D + 22 - D/√(1 - β²) = 44
Simplifying further:
D/√(1 - β²) = 22
Therefore, the father experiences half the time as experienced on Earth:
D/2 = t' = t / √(1 - β²)
Substituting the value of t',
D/2 = 3 / √(1 - β²)
Dividing both sides by 3,
D/6 = 1 / √(1 - β²)
Squaring both sides,
D²/36 = 1 / (1 - β²)
D² = 36 / (1 - β²)
D² - 36 = - 36β²
D² - 36 = - 36β²/36
D² - 1 = - β²
So, the constant speed parameter required for the trip is given as:
β = √[1 - (1/D²)]
By substituting D = 36,
β = √[1 - (1/36)]
β ≈ 0.912 (unitless)
Learn more about speed of light: https://brainly.com/question/104425
#SPJ11
Block 1, with mass m1 and speed 5.4 m/s, slides along an x axis on a frictionless floor and then undergoes a one-dimensional elastic collision with stationary block 2, with mass m2 = 0.63m1. The two blocks then slide into a region where the coefficient of kinetic friction is 0.53; there they stop. How far into that region do (a) block 1 and (b) block 2 slide? (a) Number Units (b) Number Units
In an elastic collision, the total momentum and total kinetic energy of the system are conserved. Initially, block 2 is at rest, so its momentum is zero.
Using the conservation of momentum, we can write the equation: m1v1_initial = m1v1_final + m2v2_final, where v1_initial is the initial velocity of block 1, v1_final is its final velocity, and v2_final is the final velocity of block 2.
Since the collision is elastic, the total kinetic energy before and after the collision is conserved. We can write the equation: 0.5m1v1_initial^2 = 0.5m1v1_final^2 + 0.5m2v2_final^2.
From these equations, we can solve for v1_final and v2_final in terms of the given masses and initial velocity.
After the collision, both blocks slide into a region with kinetic friction. The deceleration due to friction is given by a = μg, where μ is the coefficient of kinetic friction and g is the acceleration due to gravity.
To find the distance traveled, we can use the equation of motion: v_final^2 = v_initial^2 + 2ad, where v_final is the final velocity (zero in this case), v_initial is the initial velocity, a is the deceleration due to friction, and d is the distance traveled.
Using the calculated final velocities, we can solve for the distance traveled by each block (block 1 and block 2) in the friction region.
By plugging in the given values and performing the calculations, we can determine the distances traveled by block 1 and block 2 into the friction region.
Learn more about acceleration here:
https://brainly.com/question/30660316
#SPJ11
electron maving in the negative *-birection is undeflected. K/im (b) What In For the value of E found in part (a), what would the kinetc energy of a proton have to be (in Mev) for is to move undefiected in the negative x-direction? MeV
Therefore, the kinetic energy of a proton that moves undeflected in the negative x-direction is 2.5 MeV.
In the case of an electron moving in the negative x-direction, which remains undeflected, the magnitude of the magnetic force, FB is balanced by the magnitude of the electrostatic force, FE. Therefore,FB= FEwhere,FB = qvB, andFE = qE Where,q = 1.60 × 10-19 C (charge on an electron).The kinetic energy of a proton that would move undeflected in the negative x-direction is found from the expression for the kinetic energy of a particle;KE = (1/2)mv2where,m is the mass of the proton,v is its velocity.To find the value of kinetic energy, the following expression may be used;KE = qE d /2where,d is the distance travelled by the proton. The electric field strength, E is equal to the ratio of the potential difference V across the two points in space to the distance between them, d. Thus,E = V/dWe know that,V = E × d (potential difference), where the value of potential difference is obtained by substituting the values of E and d.V = E × d = 5 × 10^3 V = 5 kVA proton will be able to move undeflected if it has a kinetic energy of KE = qE d/2 = 4.0 × 10^-13 J. This value can be converted to MeV by dividing it by the electron charge and multiplying by 10^6.MeV = KE/q = (4.0 × 10^-13 J) / (1.60 × 10^-19 J/eV) × 10^6 eV/MeV = 2.5 MeV. Therefore, the kinetic energy of a proton that moves undeflected in the negative x-direction is 2.5 MeV.
To know more about kinetic energy visit:
https://brainly.com/question/31109288
#SPJ11
When a continuous culture is fed with substrate of concentration 1.00 g/, the critical dilution rate for washout is 0.2857 h-!. This changes to 0.295 h-' if the same organism is used but the feed concentration is 3.00 g/l . Calculate the effluent substrate concentration when, in each case, the fermenter is operated at its maximum productivity. Calculate the Substrate concentration for 3.00 g/l should be in g/l in 3 decimal places.
At maximum productivity:
- For the first case (substrate concentration of 1.00 g/l), the effluent substrate concentration is approximately 2.4965 g/l.
- For the second case (substrate concentration of 3.00 g/l), the effluent substrate concentration is approximately 7.1695 g/l.
To calculate the effluent substrate concentration when the fermenter is operated at its maximum productivity, we can use the Monod equation and the critical dilution rate for washout.
The Monod equation is given by:
μ = μmax * (S / (Ks + S))
Where:
μ is the specific growth rate (maximum productivity)
μmax is the maximum specific growth rate
S is the substrate concentration
Ks is the substrate saturation constant
First, let's calculate the maximum specific growth rate (μmax) for each case:
For the first case with a substrate concentration of 1.00 g/l:
μmax = critical dilution rate for washout = 0.2857 h^(-1)
For the second case with a substrate concentration of 3.00 g/l:
μmax = critical dilution rate for washout = 0.295 h^(-1)
Next, we can calculate the substrate concentration (S) at maximum productivity for each case.
For the first case:
μmax = μmax * (S / (Ks + S))
0.2857 = 0.2857 * (1.00 / (Ks + 1.00))
Ks + 1.00 = 1.00 / 0.2857
Ks + 1.00 ≈ 3.4965
Ks ≈ 3.4965 - 1.00
Ks ≈ 2.4965 g/l
For the second case:
μmax = μmax * (S / (Ks + S))
0.295 = 0.295 * (3.00 / (Ks + 3.00))
Ks + 3.00 = 3.00 / 0.295
Ks + 3.00 ≈ 10.1695
Ks ≈ 10.1695 - 3.00
Ks ≈ 7.1695 g/l
Therefore, at maximum productivity:
- For the first case (substrate concentration of 1.00 g/l), the effluent substrate concentration is approximately 2.4965 g/l.
- For the second case (substrate concentration of 3.00 g/l), the effluent substrate concentration is approximately 7.1695 g/l.
Learn more about Monod equation on:
https://brainly.com/question/27893282
#SPJ11
A series RLC circuit consists of a 65 Ω resistor, a 0.10 H inductor, and a 20 μF capacitor. It is attached to a 120 V/60 Hz power line. Part A
What is the peak current I at this frequency? Express your answer with the appropriate units. I = ________ Value __________ Units Part B What is the phase angle ∅? Express your answer in degrees. ∅= ______________
The peak current (I) at this frequency is approximately 1.04 A and the phase angle (∅) is approximately -63.69 degrees.
Part A:
First, let's calculate the reactance values:
The inductive reactance (XL) can be calculated using the formula:
XL = 2πfL
Substituting the given values:
XL = 2π * 60 * 0.10 = 37.68 Ω
The capacitive reactance (XC) can be calculated using the formula:
XC = 1 / (2πfC)
Substituting the given values:
XC = 1 / (2π * 60 * 20 * 10^(-6)) = 132.68 Ω
Next, let's calculate the impedance (Z):
Z = √(R^2 + (XL - XC)^2)
Substituting the given values:
Z = √(65^2 + (37.68 - 132.68)^2) = √(4225 + (-95)^2) = √(4225 + 9025) = √13250 ≈ 115.24 Ω
Now, we can calculate the peak current (I):
I = V / Z
Substituting the given voltage value:
I = 120 / 115.24 ≈ 1.04 A
Therefore, the peak current (I) at this frequency is approximately 1.04 A.
Part B:
To find the phase angle (∅), we can use the formula:
∅ = tan^(-1)((XL - XC) / R)
Substituting the calculated values:
∅ = tan^(-1)((37.68 - 132.68) / 65) ≈ -63.69°
Therefore, the phase angle (∅) is approximately -63.69 degrees.
Learn more about current: https://brainly.com/question/1100341
#SPJ11
A proton moving in the plane of the page has a kinetic energy of 6.09MeV. It enters a magnetic field of magnitude B=1.16T linear boundary of the field, as shown in the figure below. Calculate the distance x from the point of entry to where the proto Tries 2/10 Previous Tries Determine the angle between the boundary and the proton's velocity vector as it leaves the field. 4.50×10 1
deg Previous Tries
The distance x from the point of entry to where the proton exits the magnetic field is 0.0544 m and the angle between the boundary and the proton's velocity vector as it leaves the field is 41.9° is the answer.
Given that the proton has a kinetic energy of 6.09 MeV. It enters a magnetic field of magnitude B = 1.16 T linear boundary of the field. We have to determine the distance x from the point of entry to where the proton exits the magnetic field. Let v be the velocity of the proton when it enters the magnetic field and r be the radius of curvature of the proton in the field.
Then magnetic force on the proton is given asq (v × B) = mv²/r
Where q and m are the charge and mass of the proton, respectively.
From the above equation, we have v = pr/B ……….(1)
where p = mv/q is the momentum of the proton and it remains constant.
Therefore, when the proton leaves the magnetic field, we have v = pr/B
Using the conservation of energy, we have½ mv² = qvBx
Hence, x = mv²/2qB² ………..(2)Putting the given values, we get x = 0.0544 m.
The angle between the boundary and the proton's velocity vector, as it leaves the field, is given as follows: tanθ = mv/(qBr)θ = tan⁻¹(v/(qBr))
The velocity of the proton is given by equation (1) asv = pr/B
The radius of curvature of the proton is given byr = mv/qB
The angle θ between the boundary and the proton's velocity vector as it leaves the field istan θ = p/q
The angle θ = tan⁻¹ (p/q)
Putting the given values, we getθ = 41.9°
Thus, the distance x from the point of entry to where the proton exits the magnetic field is 0.0544 m and the angle between the boundary and the proton's velocity vector as it leaves the field is 41.9°.
know more about magnetic field
https://brainly.com/question/14848188
#SPJ11
In this virtual Lab will practice and review the projectile motion kinematics and motion. You will use as motivational tool a clip from movie "Hancock" which you can see directly via the link below: https://youtu.be/mYA1xLJG52s
In the scene, Hancock throws a dead whale back into the sea but accidentally causes an accident since the whale crashes upon and sinks a boat. Neglect friction and assume that the whale’s motion is affected only by gravity and it is just a projectile motion. Choose an appropriate 2-dimensional coordinate system (aka 2-dimensional frame of reference) with the origin at the whale’s position when Hancock throws it in the air. appropriate positive direction. Write down the whale’s initial position at this frame of reference, that is, x0 and y0. You do not know the initial speed of the whale (you will be asked to calculate it) but you can estimate the launching angle (initial angle) from the video. Write down the initial angle you calculated.
1. What was the whale’s initial speed when launched by Hancock? Express the speed in meters per second. What was the whale’s Range? That is how far into the sea was the boat that was hit by the whale? What is the maximum height the whale reached in the sky?
You can use in your calculations g = 10 m/s2 for simplicity.
The whale's initial speed when launched by Hancock is 28.9 m/s, its range is 508.4 m, and the maximum height the whale reached in the sky is 244.8 m.
Projectile motion is defined as the motion of an object moving in a plane with one of the dimensions being vertical and the other being horizontal. The motion of a projectile is affected by two motions: horizontal and vertical motion.
For this situation, the initial velocity (v) and the angle of projection (θ) are required to calculate the whale's initial speed.
The origin can be set at the whale's initial position, and it should be positive towards the sea.
The initial position of the whale in the frame of reference is as follows: x0 = 0 m and y0 = 0 m
Initial angle calculation: The angle of projection can be calculated using trigonometry as:θ = tan−1 (y/x)θ = tan−1 (95.5/43.9)θ = 66.06°
Initial velocity calculation: Initially, the horizontal velocity of the whale is: vx = v cos θInitially, the vertical velocity of the whale is: vy = v sin θAt the peak of the whale's trajectory, the vertical velocity becomes zero. Using the second equation of motion:0 = vy - gtvy = v sin θ - gtwhere g = 10 m/s2.
Hence, v = vy/sin θ
Initial speed = v = 28.9 m/s
Range calculation: Using the following equation, the range of the whale can be calculated: x = (v²sin2θ)/g where v = 28.9 m/s, sinθ = sin66.06°, and g = 10 m/s²x = (28.9² sin2 66.06°)/10Range = x = 508.4 m
The maximum height of the whale can be calculated using the following equation: y = (v² sin² θ)/2gy
= (28.9² sin² 66.06°)/2 × 10y = 244.8 m
Therefore, the whale's initial speed when launched by Hancock is 28.9 m/s, its range is 508.4 m, and the maximum height the whale reached in the sky is 244.8 m.
Learn more about Initial velocity here:
https://brainly.com/question/28395671
#SPJ11
(b) Estimate the pressure on the mountains underneath the Antarctic ice sheet, which is typically 3 km thick. (Density of ice = 917 kg/m³, g = 9.8 m/s²) Pressure 9170009
The estimated pressure on the mountains underneath the Antarctic ice sheet is approximately 26,854,200 N/m². To estimate the pressure on the mountains underneath the Antarctic ice sheet, we can use the formula for pressure:
Pressure = Density * g * Depth
Given:
Density of ice (ρ) = 917 kg/m³
Acceleration due to gravity (g) = 9.8 m/s²
Depth of the ice sheet (h) = 3 km = 3000 m
Plugging in these values into the formula, we get:
Pressure = 917 kg/m³ * 9.8 m/s² * 3000 m
= 26,854,200 N/m²
Therefore, the estimated pressure on the mountains underneath the Antarctic ice sheet is approximately 26,854,200 N/m².
To know more about Acceleration
brainly.com/question/31946450
#SPJ11
Retake question A 4.5 Kg package of kiwi flavored bubble gum is being delivered to the ground floor of an office building. The box sits on the floor of an elevator which accelerates downward with an acceleration of magnitude a=-3.0 m/s².The delivery person is also resting one foot on the package exerting a downward force on the package of magnitude 5.0 N. What is the normal force on the package exerted by the floor of the elevator. 63 N 36 N 126 N 31 N
Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 N.Therefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.
Given:Mass of package, m= 4.5 kg Downward acceleration, a = -3.0 m/s²Downward force exerted by delivery person, F = 5.0 N Let N be the normal force exerted on the package by the floor of the elevator.Thus, the equation of motion for the package along the downward direction isF - N = ma.Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 NTherefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
A ball is thrown at a 37° angle above the horizontal across level ground. It is released from a height of 3.00 m above the ground with a speed of 20 m/s. Calculate the maximum height reached by the ball from the ground.
A ball is thrown at a 37° angle above the horizontal across level ground. It is released from a height of 3.00 m above the ground with a speed of 20 m/s. Therefore, the maximum height reached by the ball from the ground is approximately 9.15 m.
To calculate the maximum height reached by the ball from the ground, we can use the equations of motion for projectile motion.
We can start by breaking down the initial velocity of the ball into its horizontal and vertical components.
Given that the ball is thrown at an angle of 37° above the horizontal, the horizontal component of the velocity is given by v_x = v cos θ, and the vertical component is given by v_y = v sin θ, where v is the initial speed of the ball, and θ is the angle of the velocity vector.
Therefore, we have:v_x = 20 cos 37° = 15.92 m/sv_y = 20 sin 37° = 12.06 m/sNext, we can use the equation for the maximum height reached by a projectile, which is given by:y_max = y_0 + v_y^2 / (2g),where y_0 is the initial height of the projectile, and g is the acceleration due to gravity, which is approximately equal to 9.81 m/s².
Substituting the known values into the equation, we get:y_max = 3.00 m + (12.06 m/s)² / (2 × 9.81 m/s²)≈ 9.15 m
Therefore, the maximum height reached by the ball from the ground is approximately 9.15 m.
Learn more about projectile motion here:
https://brainly.com/question/12860905
#SPJ11
What is the acceleration of a car that changes its velocity from 25 km/hr to 50 km/hr in 10 seconds? (Pay attention to your units of time here.) O 25 km/thr) 5.0 km/h) 0.35 km/h 0 250 km/h
The acceleration of the car is 0.695 m/s². From the given parameters the below shows the calculation of acceleration
Given Data:Initial velocity (u) = 25 km/hrFinal velocity (v) = 50 km/hrTime (t) = 10 secondsSince the unit of time we will be utilizing is seconds, let's first convert the velocities from kilometers per hour (km/hr) to meters per second (m/s).
Initial velocity (u) = 25 km/hr = (25 * 1000) / 3600 m/s = 6.94 m/s (rounded to two decimal places)
Final velocity (v) = 50 km/hr = (50 * 1000) / 3600 m/s = 13.89 m/s (rounded to two decimal places)
Hence the acceleration can be calculated as
acceleration = (v - u) / t
acceleration = (13.89 m/s - 6.94 m/s) / 10 s
acceleration = 6.95 m/s / 10 s
acceleration = 0.695 m/s²
Learn more acceleration here:
https://brainly.com/question/460763
#SPJ4
The voltage (in Volts) across an element is given as v(t) = 50 cos (6ft + 23.5°) whereas the current (in Amps) through the element is i(t) = -20 sin (6ft +61.2°); where time, t is the time and f is the frequency in seconds and Hertz respectively.
Determine the phase angle between the two harmonic functions.
The voltage and current functions are v(t) = 50 cos (6ft + 23.5°) and i(t) = -20 sin (6ft +61.2°), respectively. The phase angle between them is 0.66 radians or 37.8 degrees.
To determine the phase angle between the voltage and current functions, we need to find the phase difference between the cosine and sine functions that represent them.
The general form of a cosine function is given by:
cos(wt + theta)
where w is the angular frequency in radians per second, t is time in seconds, and theta is the initial phase angle in radians.
Similarly, the general form of a sine function is given by:
sin(wt + theta)
where w is the angular frequency in radians per second, t is time in seconds, and theta is the initial phase angle in radians.
Comparing the given functions for voltage and current with these general forms, we can see that the angular frequency is the same for both, and is equal to 6f radians per second. The phase angle for the voltage function is 23.5 degrees, or 0.41 radians, while the phase angle for the current function is 61.2 degrees, or 1.07 radians.
The phase difference between the two functions is given by the absolute difference between their phase angles, which is:
|0.41 - 1.07| = 0.66 radians
Therefore, the phase angle between the voltage and current functions is 0.66 radians, or approximately 37.8 degrees.
To know more about voltage and current functions, visit:
brainly.com/question/31478615
#SPJ11
Draw a vector diagram to determine the resultant of the following 3 vectors. Remember to show your work. Label and state your resultant. (5 marks) 75 m/s [South] + 105 m/s [N 70° E] -100 m/s [E 35° S]
The task is to determine the resultant of three vectors: 75 m/s [South], 105 m/s [N 70° E], and -100 m/s [E 35° S]. A vector diagram will be drawn to visually represent the vectors, and the resultant will be determined by vector addition.
To determine the resultant of the given vectors, we will first draw a vector diagram. Each vector will be represented by an arrow with the appropriate magnitude and direction. The given magnitudes and directions are 75 m/s [South], 105 m/s [N 70° E], and -100 m/s [E 35° S].
To add the vectors, we start by placing the tail of the second vector at the head of the first vector. Then, we place the tail of the third vector at the head of the resultant of the first two vectors. The resultant vector is the vector that connects the tail of the first vector to the head of the third vector.
By measuring the magnitude and direction of the resultant vector using a ruler and protractor, we can determine its values. The magnitude represents the length of the vector, and the direction represents the angle with respect to a reference direction, usually the positive x-axis.
Once the resultant vector is determined, it can be labeled and stated. The label indicates the magnitude and units of the resultant vector, and the statement indicates the direction of the resultant vector, usually relative to a reference direction or in terms of cardinal directions.
By following this process and accurately drawing the vector diagram, we can determine the resultant of the given vectors.
Learn more about three vectors here:
https://brainly.com/question/29028487
#SPJ11
Suppose that two liquid surge tanks are placed in series so that the outflow from the first tank is the inflow to the second tank. If the outlet flow rate from each tank is proportional to the height of the liquid (head) in that tank, develop the transfer function relating changes in flow rate from the second tank, Q₂ (s) to changes in flow rate into the first tank, Q(s). Assume that the two tanks have different cross- sectional areas A₁ and A2, and that the valve resistances are R₁ and R₂. Show how this transfer function is related to the individual transfer functions, H(s)/Q{(s), Qi(s)/H(s), H₂ (s)/Q1(s) and Q2 (s)/H₂(s). H(s) and H₂ (s) denote the deviations in first tank and second tank levels, respectively. Strictly use all the notation given in this question.
The resultant transfer function shows that the ratio of flow rates Q₂(s) and Q(s) is equal to the inverse of the transfer function Qi(s), which relates changes in flow rate into the first tank, Q(s), to changes in liquid level deviation in the first tank, H(s).
To develop the transfer function relating changes in flow rate from the second tank, Q₂(s), to changes in flow rate into the first tank, Q(s), we can follow the following steps:
Write the individual transfer functions:
H(s)/Q(s): Transfer function relating changes in liquid level deviation in the first tank, H(s), to changes in flow rate into the first tank, Q(s).
Qi(s)/H(s): Transfer function relating changes in flow rate into the first tank, Q(s), to changes in liquid level deviation in the first tank, H(s).
H₂(s)/Q₁(s): Transfer function relating changes in liquid level deviation in the second tank, H₂(s), to changes in flow rate from the first tank, Q₁(s).
Q₂(s)/H₂(s): Transfer function relating changes in flow rate from the second tank, Q₂(s), to changes in liquid level deviation in the second tank, H₂(s).
Apply the series configuration:
The flow rate from the first tank, Q₁(s), is the same as the flow rate into the second tank, Q(s). Therefore, Q₁(s) = Q(s).
Combine the transfer functions:
By substituting Q₁(s) = Q(s) into H₂(s)/Q₁(s) and Q₂(s)/H₂(s), we can relate H₂(s) and Q₂(s) directly to Q(s) and H(s):
H₂(s)/Q(s) = H₂(s)/Q₁(s) = H₂(s)/Q(s)
Q₂(s)/H₂(s) = Q₂(s)/Q₁(s) = Q₂(s)/Q(s)
Substitute the individual transfer functions:
Replace H₂(s)/Q(s) and Q₂(s)/Q(s) with the corresponding transfer functions:
H₂(s)/Q(s) = H₂(s)/Q₁(s) = H₂(s)/Q(s) = 1 / Qi(s)
Q₂(s)/H₂(s) = Q₂(s)/Q₁(s) = Q₂(s)/Q(s) = H(s) / H₂(s)
Combine the transfer functions:
Finally, combining the equations above, we have the transfer function relating changes in flow rate from the second tank, Q₂(s), to changes in flow rate into the first tank, Q(s):
Q₂(s)/Q(s) = H(s) / H₂(s) = 1 / Qi(s)
Learn more about flow rate here:
https://brainly.com/question/28444515
#SPJ11
A photon of wavelength 0.0426 mm strikes a free electron and is scattered at an angle of 31.0° from its original direction. is the change in energy of the priotori a loss or a gain? It's a gain. It's a loss. Previous Answers Correct Part E Find the energy gained by the electron. Express your answer in electron volts. VE ΑΣΦ ΔΕΞ Submit Request Answer eV A photon of wavelength 0.0426 mm strikes a free electron and is scattered at an angle of 31.0° from its original direction. is the change in energy of the priotori a loss or a gain? It's a gain. It's a loss. Previous Answers Correct Part E Find the energy gained by the electron. Express your answer in electron volts. VE ΑΣΦ ΔΕΞ Submit Request Answer eV A photon of wavelength 0.0426 mm strikes a free electron and is scattered at an angle of 31.0° from its original direction. is the change in energy of the priotori a loss or a gain? It's a gain. It's a loss. Previous Answers Correct Part E Find the energy gained by the electron. Express your answer in electron volts. VE ΑΣΦ ΔΕΞ Submit Request Answer eV A photon of wavelength 0.0426 mm strikes a free electron and is scattered at an angle of 31.0° from its original direction. is the change in energy of the priotori a loss or a gain? It's a gain. It's a loss. Previous Answers Correct Part E Find the energy gained by the electron. Express your answer in electron volts. VE ΑΣΦ ΔΕΞ Submit Request Answer eV
If a photon of wavelength 0.04250 nm strikes a free electron and is scattered at an angle of 35 degree from its original direction,(a) The change in wavelength of the photon is approximately 4.886 x 10^-12 nm.(b)The wavelength of the scattered light remains approximately 0.04250 nm.(c) The photon experiences a loss in energy of approximately -1.469 x 10^-16 J.(d) The electron gains approximately 1.469 x 10^-16 J of energy.
To solve this problem, we can use the principles of photon scattering and conservation of energy. Let's calculate the requested values step by step:
Given:
Initial wavelength of the photon (λ_initial) = 0.04250 nm
Scattering angle (θ) = 35 degrees
(a) Change in the wavelength of the photon:
The change in wavelength (Δλ) can be determined using the equation:
Δλ = λ_final - λ_initial
In this case, since the photon is scattered, its wavelength changes. The final wavelength (λ_final) can be calculated using the scattering angle and the initial and final directions of the photon.
Using the formula for scattering from a free electron:
λ_final - λ_initial = (h / (m_e × c)) × (1 - cos(θ))
Where:
h is Planck's constant (6.626 x 10^-34 J·s)
m_e is the mass of an electron (9.109 x 10^-31 kg)
c is the speed of light (3.00 x 10^8 m/s)
Substituting the given values:
Δλ = (6.626 x 10^-34 J·s / (9.109 x 10^-31 kg × 3.00 x 10^8 m/s)) × (1 - cos(35 degrees))
Calculating the change in wavelength:
Δλ ≈ 4.886 x 10^-12 nm
Therefore, the change in wavelength of the photon is approximately 4.886 x 10^-12 nm.
(b) Wavelength of the scattered light:
The wavelength of the scattered light can be obtained by subtracting the change in wavelength from the initial wavelength:
λ_scattered = λ_initial - Δλ
Substituting the given values:
λ_scattered = 0.04250 nm - 4.886 x 10^-12 nm
Calculating the wavelength of the scattered light:
λ_scattered ≈ 0.04250 nm
Therefore, the wavelength of the scattered light remains approximately 0.04250 nm.
(c) Change in energy of the photon:
The change in energy (ΔE) of the photon can be determined using the relationship between energy and wavelength:
ΔE = (hc / λ_initial) - (hc / λ_scattered)
Where:
h is Planck's constant (6.626 x 10^-34 J·s)
c is the speed of light (3.00 x 10^8 m/s)
Substituting the given values:
ΔE = ((6.626 x 10^-34 J·s × 3.00 x 10^8 m/s) / 0.04250 nm) - ((6.626 x 10^-34 J·s ×3.00 x 10^8 m/s) / 0.04250 nm)
Calculating the change in energy:
ΔE ≈ -1.469 x 10^-16 J
Therefore, the photon experiences a loss in energy of approximately -1.469 x 10^-16 J.
(d) Energy gained by the electron:
The energy gained by the electron is equal to the change in energy of the photon, but with opposite sign (as per conservation of energy):
Energy gained by the electron = -ΔE
Substituting the calculated value:
Energy gained by the electron ≈ 1.469 x 10^-16 J
Therefore, the electron gains approximately 1.469 x 10^-16 J of energy.
To learn more about conservation of energy visit: https://brainly.com/question/166559
#SPJ11
The purpose of the liquid coolant in automobile engines is to carry excess heat away from the combustion chamber. To achieve this successfully its temperature must stay below that of the engine and it
The liquid coolant in automobile engines serves the purpose of carrying excess heat away from the combustion chamber by maintaining a lower temperature than the engine and its components.
The liquid coolant in automobile engines plays a crucial role in preventing overheating and maintaining optimal operating temperatures. The engine produces a significant amount of heat during the combustion process, and if left unchecked, this excess heat can cause damage to engine components.
The liquid coolant, typically a mixture of water and antifreeze, circulates through the engine and absorbs heat from the combustion chamber, cylinder walls, and other hot engine parts.
To effectively carry away the excess heat, the temperature of the coolant must remain lower than that of the engine and its components. This temperature differential allows heat transfer to occur, as heat naturally flows from a higher temperature region to a lower temperature region.
The coolant absorbs the heat and carries it away to the radiator, where it releases the heat to the surrounding air. Maintaining a lower temperature than the engine is essential because it ensures that the coolant can continuously absorb heat without reaching its boiling point or becoming ineffective.
If the coolant were to reach its boiling point, it would form vapor bubbles, leading to vapor lock and reduced cooling efficiency. Additionally, if the coolant's temperature exceeded the safe operating limits of engine components, it could lead to engine damage, such as warped cylinder heads or blown gaskets.
In conclusion, the purpose of the liquid coolant in automobile engines is to carry away excess heat by maintaining a temperature below that of the engine and its components. This allows for effective heat transfer, preventing overheating and potential damage to the engine.
Learn more about temperature here ;
https://brainly.com/question/32152925
#SPJ11