Answer:
molecular formula = C₂₇H₃₆O₄₅
Explanation:
In order to find the molecular formula of a compound from its empirical formula, we need to know the number of "empirical formula units" that are in the molecular formula.
To find the number of empirical formula units, n, we use the following formula:
[tex]\boxed{\mathrm{n = \frac{molar \ mass}{empirical \ formula \ mass}}}[/tex].
The empirical formula mass is simply the molar mass of the compound that is represented by the empirical formula. Therefore, in this case,
Empirical formula mass of C₃H₄O₅ = (12 × 3) + (1 × 4) + (16 × 5)
= 36 + 4 + 80
= 120
Next, we can find the value of n using the above formula:
n = [tex]\frac{1080.54}{120}[/tex]
= 9.00
Now that we know the number of empirical formula units (n) present in the molecular formula, we simply have to multiply the number of each element present in the empirical formula by n:
Molecular formula = (empirical formula)ₙ
⇒ Molecular formula = (C₃H₄O₅)₉
= C₂₇H₃₆O₄₅
Therefore, the molecular formula of the secret compound is C₂₇H₃₆O₄₅.
Problem 1,: 500 mL of a 0.500 M solution of NaOH is titrated with a 2 M acid solution. How much acid is needed to reach its titration end-point?
Problem 2: It takes 20.0mL of 4.00M NaOH to neutralize 5.00 mL of HCL solution. What is the concentration of the HCl solution?
Problem 3: 60. mL of a 1.0 M solution of H2SO4 has titrated to it endpoint with 1 L of a basic solution. What is the molarity of the base?
Problem 4: If I add acid to 100 mL of a 0.15 M NaOH solution until it is titrated with 150 mL of acid, what will the molarity of the acid solution be?
(Last Question I swear-)
Problem 1:
The balanced chemical equation for the reaction between NaOH and the acid is:
NaOH + HX → NaX + H2O
where X represents the acid.
The stoichiometry of the reaction shows that one mole of NaOH reacts with one mole of the acid. Thus, the number of moles of acid required can be calculated as follows:
Moles of NaOH = volume (in L) x concentration (in M)
Moles of NaOH = 500 mL x (1 L/1000 mL) x 0.500 M
Moles of NaOH = 0.250 moles
Since the number of moles of the acid required is the same as the number of moles of NaOH, the amount of acid needed to reach the end-point is:
Moles of acid = 0.250 moles
The volume of the acid required can be calculated using its concentration:
Moles of acid = volume (in L) x concentration (in M)
0.250 moles = volume (in L) x 2 M
Volume of acid = 0.125 L or 125 mL
Therefore, 125 mL of the 2 M acid solution is required to reach the titration end-point.
Problem 2:
The balanced chemical equation for the reaction between NaOH and HCl is:
NaOH + HCl → NaCl + H2O
The stoichiometry of the reaction shows that one mole of NaOH reacts with one mole of HCl. Thus, the number of moles of NaOH used in the titration can be calculated as:
Moles of NaOH = volume (in L) x concentration (in M)
Moles of NaOH = 20.0 mL x (1 L/1000 mL) x 4.00 M
Moles of NaOH = 0.080 moles
Since one mole of NaOH reacts with one mole of HCl, the number of moles of HCl present in the 5.00 mL sample can be calculated as:
Moles of HCl = Moles of NaOH
Moles of HCl = 0.080 moles
The concentration of the HCl solution can be calculated as follows:
Concentration of HCl = moles/volume (in L)
Concentration of HCl = 0.080 moles/(5.00 mL x 1 L/1000 mL)
Concentration of HCl = 16.0 M
Therefore, the concentration of the HCl solution is 16.0 M.
Problem 3:
The balanced chemical equation for the reaction between H2SO4 and the base is:
H2SO4 + 2NaOH → Na2SO4 + 2H2O
The stoichiometry of the reaction shows that one mole of H2SO4 reacts with two moles of NaOH. Thus, the number of moles of NaOH used in the titration can be calculated as:
Moles of NaOH = volume (in L) x concentration (in M)
Moles of NaOH = 1.00 L x 1.0 M
Moles of NaOH = 1.0 moles
Since two moles of NaOH react with one mole of H2SO4, the number of moles of H2SO4 present in the solution is:
Moles of H2SO4 = 0.5 moles
The molarity of the base can be calculated as follows:
Molarity of base = moles/volume (in L)
Molarity of base = 0.5 moles/0.060 L
Molarity of base = 8.33 M
help me i am trying to pass
Question
A bird is soaring at a constant height above the ground.
Which statement best explains this observation?
Responses
A:The force of gravity does not apply to objects above the surface
:B The bird is light enough so that it is not affected by gravitvt
C :The flapping of a bird's wings allows gravity to pass through its body.
D :The upward force on the bird is balanced by the downward force of gravity.
The dipole moment ( μ ) of HBr (a polar covalent molecule) is 0.811D (debye), and its percent ionic character is 12 % . Estimate the bond length of the H−Br bond in picometers. Note that 1 D=3.34×10−30 C⋅m and in a bond with 100 % ionic character, Q=1.6×10−19 C .
The relationship between dipole moment, percent ionic character, bond length, and charge can be used to estimate the H-Br bond's length. The H-Br bond is thought to have a length of 144 picometers.
How do you determine the H-Br bond's bond length in picometers?We may guess the charge on the H-Br bond given the dipole moment and percent ionic character:
Q = (μ / d) * (1 / 3.34×10^-30)
Ionic character percentage equals (Q / 1.610-19) x 100%
By condensing and figuring out d, we arrive at:
D is equal to / (0.208 * sqrt(percent ionic character)).
where d is in picometers and is in Debye.
Inputting the values provided yields:
144 pm is equal to d = 0.811 D / (0.208 * sqrt(12)).
To learn more about dipole moment visit:
brainly.com/question/14140953
#SPJ1
0/1
Back to assessments
H!
Question 11
What is the pH of a solution resulting from the mixture of 50.00 mL of 0.250 M HC1 and 50.00 mL of 0.250 M
NH₂?
(K, for ammonia is 1.8 x 10-5)
a. 5.079
b. 8.921
C. 4.437
X d. 2.713
e. 9.255
Support | PowerSchool Community | PRIVACY POLICY | Terms of Use
Since HCl is a strong acid, it completely dissociates in water. Therefore, the concentration of H⁺ in the solution is equal to the initial concentration of HCl, [H⁺] = 0.250 mol/L. Therefore, the pH of the solution can be:
pH = -log(0.250) = 0.602. Therefore, the pH of the solution resulting from the mixture of HCl and NH₂ is approximately 0.602, which is closest to option (A) 5.079.
What is the pH of a solution?pH is a measurement of the acidity or basicity of a solution. It is the negative logarithm of the concentration of hydrogen ions in the solution. A pH value of 7 is considered neutral, while values below 7 are acidic, and above 7 are basic.
Can metals be acidic or alkaline?Metals are not acidic or alkaline, as acidity and alkalinity are properties of solutions rather than the metals themselves. However, when metals react with acidic or alkaline solutions, they can produce ions that can affect the pH of the solution.
To learn more about acid, visit here:
https://brainly.com/question/14072179
#SPJ9
Vypus
Instructions: In this virtual lab, you will bevestigate the law of universal gravitation by
manipulating the size of the star and the positions of planets within Solar System X. Record your
hypothesis and results in the lab report below. You will submit your completed report
Name and Title:
Include your name, instructor's name, date, and name of lab.
Objectives (3):
In your own words, what is the purpose of this lab?
Hypothesis:
In this section, please include the if then statements you developed during your lab activity.
These statements reflect your predicted outcomes for the experiment.
If the mass of the sun is 1x, at least one planet will fall into the habitable zone if I place a planet
in orbits
and all planets will orbit the sun successfully.
If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet
in orbits
and all planets will orbit the sun successfully.
and
If the mass of the sun is 3x, at least one planet will fall into the habitable zone if I place a planet
, and all planets will orbit the sun successfully.
in orbits
Procedure:
The materials and procedures are listed in your virtual lab. You do not need to repeat them here.
However, you should note if you experienced any errors or other factors that might affect your
outcome.
Using the summary questions at the end of your virtual lab activity, please clearly define the
dependent and independent variables of the experiment.
Data:
When the mass of the sun is larger, Earth moves around the sun at a
pace.
When the mass of the sun is smaller, Earth moves around the sun at a
pace
When Earth is closer to the sun, its orbit becomes
When Earth is farther from the sun, its orbit becomes
Exemple:
Sun's Mass Ex
sun's mass
Ix-Trial One
sun's mass
Ix-Trial Two
For each trial, record the orbit number of each planet from the sun. Be sure to indicate the
number of planets in the habitable zone after each trial. Create a different configuration of
planets for each trial. An example has been supplied for you.
sun's mass
2x-Trial One
sun's mass
2x-Trial Two
sun's mass
3x-Trial One
sun's mass
3x-Trial Two
Orbit
Number
Planet One
1
Orbit
Number
Planet
Two
(faster, slower).
(faster, slower).
5
Orbit Orbit
Number Number
Planet
Planet
Four
Three
(faster, slower)
(faster, slower)
6
Number of Number of
planets in planets left
the
habitable
zone
successful
orbit
Conclusion:
Your conclusion will include a summary of the lab results and an interpretation of the results.
Please answer all questions in complete sentences using your own words.
1. Using two to three sentences, summarize what you investigated and observed in this lab.
2. You completed three terra forming trials. Describe the how the sun's mass affects planets
in a solar system. Use data you recorded to support your conclusions.
3. In this simulation, the masses of the planets were all the same. Do you think if the masses
of the planets were different, it would affect the resalts? Why or why not?
Answer:
Explanation:
This simulation demonstrates the law of universal gravitation by showing how the gravitational force between objects depends on their masses and the distance between them.
The new planet is located in the habitable zone and has a similar atmosphere to Earth, with oxygen and nitrogen. It also has a magnetic field that protects it from solar winds and a stable climate that supports a diverse range of ecosystems.
If the masses of the planets were different, it would affect the results because the gravitational force between the planets would change.
The sun's mass affects planets in a solar system by influencing the pace of the planets' orbit around it.
Learn more about planets at:
brainly.com/question/14581221
#SPJ2
We wish to determine the mass of BaSO4 formed
when 200. mL of 0.10 M BaCl₂ reacts with excess
Na₂SO4 according to the equation below.
BaCl₂(aq) + Na₂SO4 (aq) → BaSO4(s) + 2NaCl(aq)
In the previous step, you determined
0.020 mol BaCl₂ reacts. The molar mass of BaSO4
is 233.39 g/mol.
What mass of BaSO4 forms during the reaction?
Mass (g) BaSO
Enter
The mass of BaSO₄ formed during the reaction is calculated as 4.67 g.
What is meant by balanced chemical equation?Equation that has equal number of atoms of each element on both the sides of equation is known as balanced chemical equation.
Balanced chemical equation for the reaction is: BaCl₂(aq) + Na₂SO₄ (aq) → BaSO₄(s) + 2NaCl(aq)
From the equation, we can see that 1 mole of BaCl₂ reacts with 1 mole of BaSO₄.
Given that 0.020 mol BaCl₂ reacts. Therefore, 0.020 mol BaSO₄ is formed.
To determine the mass of BaSO₄ formed, we can use the following formula: mass = moles x molar mass
So, mass = 0.020 mol x 233.39 g/mol
mass = 4.67 g
Therefore, the mass of BaSO4 formed during the reaction is 4.67 g.
To know more about balanced chemical equation, refer
https://brainly.com/question/11904811
#SPJ1
If you start with 1.953 g of salicylic acid what is the theoretical yield of aspirin?
To calculate the theoretical yield of aspirin, we need to know the balanced equation for the reaction between salicylic acid and acetic anhydride, which is:
salicylic acid + acetic anhydride → aspirin + acetic acid
The balanced equation tells us that one mole of salicylic acid reacts with one mole of acetic anhydride to produce one mole of aspirin and one mole of acetic acid.
The molar mass of salicylic acid is 138.12 g/mol, so 1.953 g is equal to:
1.953 g / 138.12 g/mol = 0.01414 mol salicylic acid
According to the balanced equation, one mole of salicylic acid produces one mole of aspirin. The molar mass of aspirin is 180.16 g/mol, so the theoretical yield of aspirin is:
0.01414 mol aspirin × 180.16 g/mol = 2.55 g aspirin
Therefore, the theoretical yield of aspirin from 1.953 g of salicylic acid is 2.55 g.
What is an acid ?An acid is a chemical compound or substance that can donate hydrogen ions (H+) or accept electrons in chemical reactions, or a substance that can lower the pH of a solution by releasing H+ ions. Acids have a sour taste and can react with bases to form salts. They are commonly used in industries such as food, pharmaceuticals, and chemical manufacturing. Examples of common acids include hydrochloric acid, sulfuric acid, and acetic acid.
To know more about acid visit :
https://brainly.com/question/14072179
#SPJ1
Can to you do this for me please
Answer: It is homozygous recessive for blue eyes.
Explanation: If an individual has blue eyes, it means that they must have received two recessive alleles for eye color (bb) – one from each parent. Therefore, the genotype of an individual with blue eyes is homozygous recessive for blue eyes.
Show what decomposers are and why they are an important part of the food chain.
Decomposers are organisms that convert dead plants or animals into the nutrients needed by living vegetation.
Why do decomposers play such a crucial role in the food chain?The energy-transfer capacity of an environment depends on decomposers. They break down decaying organisms into simpler inorganic materials, releasing nutrients that can be used by main producers.
What function does a decomposer play in the food web, specifically?Decomposers are a class of organisms that make up the last component in the food chain. They decompose dead vegetation and animals and replenish the soil's essential nutrients. Because they are the original source of energy that is passed between other organisms, primary producers are crucial to the entire food chain.
To know more about Decomposers visit:-
https://brainly.com/question/28896356
#SPJ1
Suppose that the microwave radiation has a wavelength of 12.4 cm. How many photons are required to heat 205 mL of coffee from 25.0 ∘C to 62.0 ∘C ? Assume that the coffee has the same density, 0.997 g/mL, and specific heat capacity, 4.184 J/(g⋅K) , as water over this temperature range.
it would take approximately 1.986 ×
[tex] {10}^{25} [/tex]
photons to heat 205 mL of coffee from 25.0 °C to 62.0 °C using microwave radiation with a wavelength of 12.4 cm.
The first step is to calculate the amount of energy required to heat the coffee. We can use the formula:
Q = mcΔT
where Q is the amount of energy required, m is the mass of the coffee, c is the specific heat capacity, and ΔT is the change in temperature.
The mass of the coffee can be calculated as:
m = density × volume
m = 0.997 g/mL × 205 mL = 204.485 g
ΔT = 62.0 °C - 25.0 °C = 37.0 °C
Q = (204.485 g) × (4.184 J/(g⋅K)) × (37.0 °C) = 31612.09 J
The next step is to calculate the energy per photon of the microwave radiation. We can use the formula:
E = hc/λ
where E is the energy per photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the radiation.
Converting the wavelength to meters:
λ = 12.4 cm = 0.124 m
[tex]E = (6.626 × 10^-34 J⋅s) × (2.998 × 10^8 m/s) / (0.124 m) = 1.594 × 10^-22 J/photon[/tex]
Finally, we can calculate the number of photons required by dividing the energy required to heat the coffee by the energy per photon of the microwave radiation:
Number of photons = Q / E
photon =
[tex]1.986 × {10}^{25} photons[/tex]
learn more about specific heat capacity here:
https://brainly.com/question/29766819
#SPJ1
How many grams of aluminum will react fully with 1.25 moles Cl2? 2A1+ 3Cl₂ → 2AICI3 [?] g Al Mass Al (g)
22.49 grams of aluminum will react fully with 1.25 moles of [tex]Cl_{2}[/tex].
What is Moles?
Moles is a unit of measurement used in chemistry to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains the same number of particles (atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12.
To determine the mass of aluminum that will react fully with 1.25 moles of [tex]Cl_{2}[/tex], we need to use the stoichiometry of the balanced chemical equation.
From the balanced chemical equation:
2 Al + 3 [tex]Cl_{2}[/tex] → 2 Al[tex]Cl_{3}[/tex]
we can see that 2 moles of Al react with 3 moles of [tex]Cl_{2}[/tex] to produce 2 moles of Al[tex]Cl_{3}[/tex]. Therefore, the mole ratio of Al to [tex]Cl_{2}[/tex] is 2:3.
To calculate the amount of Al required to react with 1.25 moles of [tex]Cl_{2}[/tex], we can set up the following proportion:
2 moles Al / 3 moles [tex]Cl_{2}[/tex] = x moles Al / 1.25 moles [tex]Cl_{2}[/tex]
where x is the number of moles of Al required.
Solving for x, we get:
x = (2/3) * 1.25 = 0.8333 moles Al
Finally, we can use the molar mass of aluminum to convert moles to grams:
mass of Al = number of moles of Al * molar mass of Al
mass of Al = 0.8333 mol * 26.98 g/mol
mass of Al = 22.49 g
Therefore, 22.49 grams of aluminum will react fully with 1.25 moles of C[tex]Cl_{2}[/tex].
Learn more about Moles
https://brainly.com/question/29367909
#SPJ1
I NEED ASAPPP
How many moles of bromine gas would occupy a volume of 20 L at a pressure of .90 atm and a temperature of 90°C? Show all work.
R= 8.31 L kPa/K mol
1 atm=101.3kPa
0.0652 moles of bromine gas would occupy a volume of 20 L at a pressure of 0.90 atm and a temperature of 90°C.
To solve this problem, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:
T = 90°C + 273.15 = 363.15 K
Next, we need to convert the pressure from atm to kPa:
0.90 atm x 101.3 kPa/atm = 91.17 kPa
Now we can plug in the values we have:
n = (PV) / (RT)
n = (91.17 kPa x 20 L) / (8.31 L kPa/K mol x 363.15 K)
n = 0.0652 mol.
Learn more about pressure here:
https://brainly.com/question/12971272
#SPJ1
2. Which of the following conclusions
geologists draw about a limestone rock layer
based on the law of superposition?
A. The limestone is 2 million years old.
B. The limestone contains 2 million fossils.
C. The limestone is younger than the
sandstone below it.
D. The limestone is the same age as another
layer 100 kilometers away.
ar
Based on the law of superposition, geologists can conclude that the limestone rock layer is younger than the sandstone layer below it.
This is because the law of superposition states that in an undisturbed sequence of rock layers, the oldest layer is at the bottom and the youngest layer is at the top. Therefore, since the sandstone layer is found below the limestone layer, it must be older.
The age of the limestone layer itself cannot be determined solely based on the law of superposition. While geologists can infer that the limestone layer is younger than the underlying sandstone layer, they would need to use other methods such as radiometric dating to determine the actual age of the rock layer.
Similarly, the presence of fossils in the limestone layer cannot be determined based solely on the law of superposition. While it is possible that the limestone layer may contain fossils, this would need to be confirmed through further investigation and analysis.
The age of another layer 100 kilometers away also cannot be determined solely based on the law of superposition. While the law of superposition can provide information about the relative ages of rock layers within a local area, it cannot be used to compare the ages of rock layers in different locations.
To know more about law of superposition, visit:
https://brainly.com/question/12493909
#SPJ1
Is the reaction between hydrochloric acid and sodium hydroxide an exothermic or endothermic reaction? (1 mark)
The reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is exothermic reaction.
What is an exothermic reaction?In exothermic reaction, energy is transferred into surroundings rather than taking energy from surroundings as in the endothermic reaction.
In this reaction, HCl reacts with NaOH to form water (H₂O) and sodium chloride (NaCl) while releasing energy in the form of heat. The reaction is as follows: HCl + NaOH → NaCl + H₂O + heat
This means that the reaction releases heat to the surroundings, and the temperature of the mixture increases. This is why this reaction is exothermic in nature.
To know more about exothermic reactions, refer
https://brainly.com/question/2924714
#SPJ1
calculate molarity of 8×10^-3 moles of HCl dissolved in 25cm³ of water.
[tex]Molarity = \frac{Moles(solute)}{Volume(solution)}[/tex]
Volume = 25cm³ = 25mL = 0.025 LMolarity = 8x10⁻³/0.025Molarity = 0.32M★ I hope it helps you :)........
Analyse the step-by-step of guiding students on how to write balanced chemical equations and ionic equation
Here is a step-by-step guide for guiding students on how to write balanced chemical equations and ionic equations:
Steps:
1. Determine the reactants and products: Start by identifying the reactants and products in the chemical reaction. This involves reading the problem and identifying the substances that are being reacted.
2. Write the unbalanced equation: Once the reactants and products have been identified, write the unbalanced chemical equation using the chemical formulas for each reactant and product.
3. Balance the equation: To balance the equation, adjust the coefficients of the reactants and products so that the number of atoms of each element is equal on both sides of the equation. Begin by balancing the atoms of elements that appear only once on each side of the equation, and then move on to elements that appear more than once.
4. Check the balanced equation: After balancing the equation, double-check to make sure that the number of atoms of each element is the same on both sides of the equation.
5. Write the ionic equation: To write the ionic equation, break apart any soluble ionic compounds into their individual ions. Then, cancel out any spectator ions that appear on both sides of the equation.
6. Check the ionic equation: Double-check the ionic equation to make sure that the same number and type of ions appear on both sides of the equation.
7. (Optional) Include states of matter: It is common practice to include the states of matter (solid, liquid, gas, aqueous) of the reactants and products in the chemical equation. This can be done by using abbreviations in parentheses after each chemical formula.
By following these steps, students can learn how to write balanced chemical equations and ionic equations accurately and efficiently.
To know more about ionic equations, visit:
https://brainly.com/question/29299745
#SPJ1
Menthol, C10H200, is a compound often
used in creams for muscle aches.
If there are 2.25 x 10^-6 moles of oxygen in a sample, how many atoms of carbon are in the same sample?
Answer:
2.25 x 10^-5 moles or 1.355 x 10^19 atoms
Explanation:
Menthol has the chemical formula C10H20O, which means that for every 1 mole of oxygen (O) in a sample of menthol, there are 10 moles of carbon. So if there are 2.25 x 10^-6 moles of oxygen in a sample of menthol, then there are 10 * 2.25 x 10^-6 = 2.25 x 10^-5 moles of carbon in the same sample.
Since there are Avogadro’s number (6.022 x 10^23) atoms in one mole of any substance, there are 2.25 x 10^-5 moles * 6.022 x 10^23 atoms/mole = 1.355 x 10^19 atoms of carbon in the same sample.
hybridization and it's effects
Explanation:
hybridization refers to the process of mixing atomic orbitals in a way that creates new hybrid orbitals. This is commonly observed in organic chemistry, where hybridization is used to explain the shapes and bonding properties of molecules.
The hybridization of atomic orbitals occurs when atoms bond to form molecules. In the hybridization process, the valence electrons of an atom are rearranged and redistributed in order to form new orbitals with different shapes and energies. This can result in stronger and more stable bonding between atoms.
The most common types of hybridization are sp, sp2, and sp3, which involve the mixing of s and p orbitals. For example, in the sp3 hybridization of carbon, the 2s orbital and three 2p orbitals are combined to form four sp3 hybrid orbitals, which are arranged in a tetrahedral shape.
The effects of hybridization in chemistry include changes in the bond angles, bond lengths, and overall shape of molecules. This can affect the reactivity and chemical properties of the molecule, such as its acidity or basicity.
Which of the following choices is an example of an Everglade species adaptation?
Alligators dig large holes in the mud that retain water during the dry season.
Zebras have striped colorations that help them hide from predators in the grasses.
Raccoons steal eggs from birds’ nests.
All of these choices are correct.
The example of an Everglade species adaptation among the given choices is: Alligators dig large holes in the mud that retain water during the dry season.
What are the alligators?
Alligators in the Everglades have adapted to survive the dry season by digging "gator holes" which are large depressions in the mud that retain water. These gator holes provide the alligators with a habitat to survive during the dry season and are also important for other species in the ecosystem. Other species such as fish, turtles, and wading birds also use these gator holes as a source of water during the dry season.
Zebras having striped colorations that help them hide from predators in the grasses is an example of an adaptation seen in savanna ecosystems. Raccoons stealing eggs from bird's nests is an example of behavior, but not an adaptation specific to the Everglades ecosystem. Therefore, the correct answer is: Only the first choice is an example of an Everglade species adaptation.
To know more about Alligators, visit:
https://brainly.com/question/13612956
#SPJ1
Complete question is: The example of an Everglade species adaptation among the given choices is: Alligators dig large holes in the mud that retain water during the dry season.
What would be the destiny (in g/L) of a sample of C2H2Cl2 gas at 70.0C and 2.50 atm of pressure
The density of the gas would be 9.01 g/L.
To calculate the density (in g/L) of a gas, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
To solve for n/V (the number of moles of gas per unit volume), we can rearrange the ideal gas law:
n/V = P/RT
The density (in g/L) is then equal to the molar mass (in g/mol) times n/V:
density = (molar mass) * (n/V)
The molar mass of C₂H₂Cl₂ is:
2(12.01 g/mol) + 2(1.01 g/mol) + 2(35.45 g/mol) = 96.93 g/mol
To use the ideal gas law, we need to convert the temperature to Kelvin:
70.0C + 273.15 = 343.15 K
Plugging in the values:
P = 2.50 atm
V = unknown (we are not given the volume)
n/V = P/RT = 2.50 atm / (0.08206 Latm/(molK) * 343.15 K) = 0.0930 mol/L
molar mass = 96.93 g/mol
Therefore, the density of the C₂H₂Cl₂ gas at 70.0C and 2.50 atm of pressure is:
density = (molar mass) * (n/V) = 96.93 g/mol * 0.0930 mol/L = 9.01 g/L.
Learn more about density here:
https://brainly.com/question/15164682
#SPJ1
B. Imagine that the food coloring is a type of atom. Based on your observations, how does the concept of Brownian motion help to explain what you observed?
Answer:
observed?Brownian motion is the random movement of particles suspended in a fluid due to collisions with other molecules in the fluid. In this case, the food coloring molecules are suspended in the water, which is a fluid, and the random movement of the water molecules causes the food coloring molecules to move around in a random pattern. This movement is similar to the movement of atoms in a gas or liquid, which is also driven by Brownian motion. So, the concept of Brownian motion helps to explain the random movement of the food coloring molecules in the water, as observed in the experiment.
why does electrolysis in aqueous solution of sodium chloride does not produce sodium as it's cathode
Because water is more quickly reduced than Na+ ions, the sodium metal that results from the electrolysis of aqueous NaCl is replaced at the cathode by hydrogen gas.
Why does sodium not evolve at the cathode during electrolysis of aqueous sodium chloride?The positively charged salt in NaCl tends to travel towards the negatively charged substance in accordance with the law of attraction. Because the anode acts as a negatively charged diode during electrolysis, sodium moves towards the anode rather than the cathode.
Why does sodium chloride electrolysis fail to yield metallic sodium?When sodium is created, it immediately interacts with water molecules to create sodium hydroxide. You will therefore receive aqueous solution of sodium hydroxide and hydrogen gas rather than pure sodium metal.
To learn more about electrolysis visit:
brainly.com/question/12054569
#SPJ9
15. How many grams are in 3.946 moles of NaCl?
There are 230.6 grams in 3.946 moles of NaCl.
How many grams are in 3.946 moles of NaCl?The molar mass of a substance is the mass in grams of one mole of that substance.
To determine the number of grams in a given number of moles of a substance, you need to know its molar mass.
The molar mass of NaCl is the sum of the atomic masses of sodium (Na) and chlorine (Cl) in the compound, which are 22.99 g/mol and 35.45 g/mol, respectively. Therefore, the molar mass of NaCl is:
molar mass of NaCl = (1 x atomic mass of Na) + (1 x atomic mass of Cl)
molar mass of NaCl = (1 x 22.99 g/mol) + (1 x 35.45 g/mol)
molar mass of NaCl = 58.44 g/mol
To convert moles of NaCl to grams, you can use the following formula:
mass (in grams) = number of moles x molar mass
So, for 3.946 moles of NaCl:
mass = 3.946 moles x 58.44 g/mol
mass = 230.6 g
Therefore, the number of grams are 230.6.
Learn more about molar mass here: https://brainly.com/question/30640134
#SPJ1
Coal is mined from several locations in the US, such as the San Juan Basin of northwestern New Mexico. This fossil fuel formed
A.
from the burial and decomposition of plant material.
B.
as a product of photosynthesis.
C.
as a byproduct of landfill waste.
D.
from molten rock deep in the Earth's interior.
Answer: A from the burial and decomposition of plant material.
Explanation:
In order to produce an electric current in a coil of wire, a magnetic field through the coil must be
A) positive
B) moving
C) negative
D) neutralized
How many mL of a 5.25 M NaOH is needed to prepare 330.0 mL of a 1.10 M solution?
Answer:
3.998 grams NaOH
Explanation:
Mrs. B sets up two beakers that contain the same amount of water. She has two blocks of different materials that she labels "A" and "B." She places one block in each beaker. Block A sinks and Block B floats. Why?
The reason why Block A sinks while Block B floats is due to their relative densities.
What is density?
Density is defined as the mass of an object per unit volume, and it determines whether an object will float or sink in a fluid.
Block A must have a higher density than the water, causing it to sink. In contrast, Block B must have a lower density than the water, causing it to float.
Density can be calculated by dividing the mass of an object by its volume. Therefore, to determine why one block has a higher density than the other, we need to know their masses and volumes.
It's possible that Block A is made of a denser material such as iron, while Block B is made of a less dense material such as wood or plastic. Alternatively, it could be that Block A has a greater volume than Block B, or that Block B has a hollow space inside that reduces its overall density.
To know more about Density, visit:
https://brainly.com/question/29775886
#SPJ1
Complete question is: Mrs. B sets up two beakers that contain the same amount of water. She has two blocks of different materials that she labels "A" and "B." She places one block in each beaker. Block A sinks and Block B floats. The reason why Block A sinks while Block B floats is due to their relative densities.
why do humans primarily form communities
Humans primarily form communities because social interaction is essential for our survival and well-being.
Living in communities provides us with numerous benefits that we cannot obtain on our own, including protection, food and resource sharing, cooperation, and support. Communities allow us to pool resources and skills, to share knowledge and experiences, and to work together to achieve common goals.
In addition, humans are social creatures by nature, and we have a natural inclination to form social connections and relationships with others. Being part of a community satisfies this need for social interaction and can lead to increased feelings of belonging, purpose, and happiness. Community also provides opportunities for personal growth, learning, and development, as we are exposed to different perspectives, ideas, and experiences through interactions with others.
Overall, forming communities allows humans to better navigate the challenges and opportunities of the world, and to achieve a higher quality of life through cooperation and collaboration.
To know more about communities please refer:
https://brainly.com/question/11490147
#SPJ1
fill in the blanks
water is a......
Water is a tiny molecule.
it consists of three atoms : two of hydrogen and one of oxygen. Water molecules cling to each other because of a force called hydrogen bonding.
Arif decided to make a model of the global wind patterns on Earth. He draws arrows of the global winds that move in a circular pattern from the equator to the poles and back again. Explain what causes global winds to form. Why do they move in convection currents around Earth?
Global winds form due to differential heating of the Earth's surface by the sun, creating convection currents in the atmosphere, which are influenced by the rotation of the Earth, resulting in circular wind patterns around the planet.
What causes global winds to form and why do they move in convection currents around Earth?
Global winds are caused by the differential heating of the Earth's surface by the sun. The sun heats the Earth's surface unevenly due to the varying angles of incidence of the sun's rays and the Earth's curvature. The equator receives more direct sunlight than the poles, which creates a temperature difference between these regions. This temperature difference causes the air to move from the equator to the poles, creating convection currents in the atmosphere.
These convection currents create global wind patterns that move in a circular pattern from the equator to the poles and back again. As the warm air rises near the equator, it moves towards the poles, where it cools and sinks back down to the surface. The cooler air near the poles then moves towards the equator to replace the rising warm air.
These wind patterns are also influenced by the rotation of the Earth, which causes the Coriolis effect. The Coriolis effect causes wind to deflect to the right in the Northern-Hemisphere and to the far left in the Southern-Hemisphere.This deflection results in the formation of the trade winds, westerlies, and polar easterlies that are part of the global wind patterns.
In summary, the differential heating of the Earth's surface by the sun causes convection currents in the atmosphere, which create the global wind patterns. The rotation of the Earth influences these wind patterns, resulting in the formation of the trade winds, westerlies, and polar easterlies that move in a circular pattern from the equator to the poles and back again.
To learn more about Global winds, visit: https://brainly.com/question/29404140
#SPJ1