The answers to the questions are as follows;
It would gain three electronsThe difference in their electronegativities.The elements have filled Valence levelspotassium (K) with a 1+ chargeClO-Question 1:
How would the electron configuration of nitrogen change to make a stable configuration?Since Nitrogen has 5 Valence electrons, it needs 3 electrons to attain it's octet configuration. As such, it gains 3 electrons.
Question 2:
Which quantity determines how two atoms bond.The quantity which determines how two atoms bond is The difference in their electronegativities.
Question 3:
Which statement best explains why the elements in Group 18 do not have electronegativity values.This is because the elements have filled Valence levels.
Question 4:
Based on patterns in the periodic table, which ion has a stable valence electron configurationThe ion which has a stable Valence electron configuration is potassium (K) with a 1+ charge
Question 5;
Which chemical formula represents a polyatomic ion?The chemical formula which represents a polyatomic ion is; ClO-
The nucleus of most atoms is composed of which of the following sub-atomic particles?
A. tightly packed protons.
B. tightly packed neutrons.
C. tightly packed protons and neutrons.
D. loosely connected protons and electrons.
Answer:
C. Tightly packed protons and neutrons
Explanation:
It consists of two sub-atomic particle namely proton and neutron.
This dense nucleus is responsible for most of the mass of atom.
Answer:
C. tightly packed protons and neutrons
Explanation:
The nucleus of an atom is made of protons and neutrons with electrons orbiting the nucleus.
Which element in the list is the most reactive?
C
Ba
S
Cs
Answer:
Cs
Explanation:
This element is the farthest right, and lowest meaning that the reactivity of it is very high.
1. valence electrons and electronegativity
2. Both reactivity and electronegativity decrease down a group.
3. Electronegativity decreases down a group, and reactivity increases down a group.
4. The number of valence electrons increases from left to right.
5. Cs
{quizlet: captncrun}
Predict the ions that form when magnesium(group IIA) and nitrogen (group VA) react:.
Answer: Mg²⁺ & N³⁻
Explanation:
Since Magnesium is in group 2, then it favors losing two electrons forming a cation with a charge of +2 ( Mg²⁺).
Since Nitrogen is in group VA, it favors gaining three electrons forming the anion with charge -3 (N³⁻).
a noncovalent interaction between two molecules is known as
A non-covalent interactions between molecules are van der Waal's forces and hydrogen bonds.
What are non-covalent interactions?
Non-covalent interaction is an interaction which does not involve sharing of electrons and in this aspect it differs from covalent bond.It rather involves dispersed variations of electromagnetic interactions which are present between the molecules or within the molecule.
The energy released during the formation of these interactions is of the order of 1-5 kcal .They are classified as electrostatic, pi effects , van der waals forces and hydrophobic effects.
They are important in maintaining the three dimensional structure of large molecules such as proteins ,nucleic acids ,etc.They are also involved in biological processes . They heavily influence drug design process and design of materials.
Learn more about non-covalent interactions,here:
https://brainly.com/question/10736477
#SPJ2
PLEASE HELP I BEG
Q2 answer in one word
1.two important properties of any sound
2.time taken by a vibrating body to complete one vibration
3. vibration of frequency higher than 20000 Hz
Answer:
1.Velocity and pitch
2.The unit of vibration is hertz. The number of oscillations of an oscillating body per second is known as frequency. Complete step by step answer: The time taken by a vibrating body to complete one vibration is time period.
3.Frequencies above 20,000 Hz are known as ultrasound.
What factors affect the strength of electric and magnetic forces?
Answer:
nature of the core material, strength of the current passing through the core
Explanation:
Have a great day
What is igneous rock?
Answer: A) Rock formed by...magma or lava
Explanation:
As the question says, igneous rocks are formed from the cooling and solidification of magma or lava.
just a bit of visual aid thanks to Thoughtco.
Answer:
It is the first one - Rock formed by the cooling and solidification of hot liquid magma or lava.
Explanation:
answer pls asap!!!!!!
Answer:
im going to go with letter c
Explanation:
Answer:
Changes can occur to physical properties of a substance, but the chemical composition of the substance remains the same.
Explanation:
Physical change is a change in which there is no change in the chemical arrangement and thus there is no redistribution of atoms. No new substances are formed. There is only change in size, shape and phase etc.
[tex]H_2O(l)[/tex]→[tex]H_2O(g)[/tex]
Chemical change is a change in which there is change in the chemical arrangement and thus there is redistribution of atoms. which leads to formation of new substances.
[tex]2Na+Cl_2[/tex]→[tex]2NaCl[/tex]
What is the molecular mass of Br 2?
Answer:
159.808 g/mol
Answer:
159.80 g/mol
Explanation:
79.90×2=159.80g/mol
which compound would have the lowest melting point?
The system containing all the muscles of the body especially those involved in movement CONSIST of the three types of muscle skeletal smooth and cardiac
igneous rocks might show that there once was blank near by
Answer:
volcano is the likely answer
CAN SOMEONE HELP ME TO MY HOMEWORK I GIVE BRAINLIEST PLEASE
direction: LABELS EACH LAYERS USING NUMBER TO SHOW AGE OF ROCKS 1 AS THE OLDEST AND 6 IS TUE YOUNGEST PUT THE NUMBER ON THE CIRCLE PROVIDED IN EACH LAYER
I believe this is correct! :D
What does wind cause weathering?
A) when cannot cause the weathering of rocks.
B) Wind can blow sand and create new landforms.
C) Wind picks up sand or dry soil
And carries it from one place to another
D) Blowing sand can wear away a rocks surface and break it into smaller pieces
Answer:
D
Explanation:
The blowing sand chips away at the rocks and, over time, the rocks start getting smaller, due to the weathering.
Answer:
Wind picks up sand or dry soil
And carries it from one place to another
Explanation:
Give the number of the sample bottle that contains a substance that would be used in
each situation.
1.
Plumbing
5.
Computer chips
2.
Flavoring Food
6.
Edible Cooking Ingredient
3.
Crafts
7.
Edible Cooking Ingredient
For a headache
8.
Edible Cooking Ingredient
to o N O
4.
Activity 32 can someone explain how u do this?.
Answer:
write a question and answer it with the words
Explanation:
Gloria/ the bank/ the car
A: where is Gloria going? To the bank, right?
B: Yes, she's going to the bank. She's going in a car.
which molecules are required for the citric acid cycle to fully oxidize the carbons donated by acetyl coa?
Explanation:
At the start of the citric acid cycle, a molecule of oxaloacetate accepts a two-carbon acetyl group from acetyl CoA to form citrate. This reaction kicks off the citric acid cycle; thus, oxaloacetate is required for the cycle to take place.
To begin the citric acid cycle, an oxaloacetate molecule accepts a two-carbon acetyl group from acetyl CoA to form citrate. Because this reaction initiates the citric acid cycle, oxaloacetate is required for the cycle to occur.
What is citric acid cycle ?The Krebs cycle, also known as the citric acid cycle or TCA cycle, is a chain of reactions that occurs in the mitochondria and is used by almost all living cells to produce energy through aerobic respiration. It consumes oxygen and emits water and carbon dioxide as byproducts.
All aerobic organisms use a series of chemical reactions to generate energy by converting acetate derived from carbohydrates, fats, and proteins into carbon dioxide.
The citric acid cycle involves the attachment of an acetyl group from acetyl CoA to a four-carbon oxaloacetate molecule to form a six-carbon citrate molecule.
Thus, Citrate is oxidized in a series of steps, releasing two carbon dioxide molecules for each acetyl group fed into the cycle.
To learn more about the citric acid cycle, follow the link;
https://brainly.com/question/11459709
#SPJ6
3. What is the energy of a photon that has a frequency of 2.3 x 1014 Hz?
The energy of a photon that has a frequency of 2.3 x 10¹⁴ Hz is 1.524 × 10-¹⁹J
HOW TO CALCULATE ENERGY OF A PHOTON:
The energy of a photon can be calculated by using the formula as follows:E = hf
Where;
E = energy of photon (J)
h = Planck's constant (6.626 × 10-³⁴J)
f = frequency of photon (Hz)
According to this question, a photon has a frequency of frequency of 2.3 x 10¹⁴ Hz. The energy of the photon can be calculated as follows:E = 6.626 × 10-³⁴ × 2.3 × 10¹⁴
E = 15.24 × 10-³⁴+¹⁴
E = 15.24 × 10-²⁰J
E = 1.524 × 10-¹⁹J
Therefore, energy of a photon that has a frequency of 2.3 x 10¹⁴ Hz is 1.524 × 10-¹⁹JLearn more at: https://brainly.com/question/23180082?referrer=searchResults
How do the claims in drug ads impact the medical profession in 4 sentence
Answer:
But drug advertising is not all about deception. It can offer helpful information if you know what to look for. "Advertisements can offer information on drugs that may help many older men, especially those who have conditions that may be tough to treat or manage, such as diabetes and hypertension,"
Regular table salt is sodium chloride, NaCl. It is a bonding of an Na+ ion and a Cl- ion. Which of these ions is bigger?
Answer:
in the periodic table we can see that the ions of Cl is greater than the ions in Na
Cl- ion is bigger than Na+ ion because of the presence of more number of electrons.
The atomic number of sodium+ ion is 10 means it has 10 number of electrons which can accommodate into 2 shells or orbits while on the hand, chlorine- ion has atomic number 18 means it has 18 number of electrons which can be accommodate into 3 shells or orbit.
So there is one shell more in chlorine ion as compared to sodium ion which make the size of chlorine ion large so we can conclude that chlorine ion is bigger than sodium ion.
Learn more: https://brainly.com/question/25151670
NO LINKSSS PLEASE!!!
When a 1.0 gram of a salt is added to a beaker containing a solution of the salt, the salt crystals dissolve. It can be concluded that the original solution was...
Select one:
a. concentrated.
b. saturated.
c. supersaturated.
d. unsaturated.
b) unsaturated
Hope this helped you- have a good day bro cya)
Because only certain size electron orbits are allowable, the frequency and energy of the electron is ___ .
Because only certain size electron orbits are allowable, the frequency and energy of the electron is quantized
According to the Bohr model of the atom, an electron moves from a lower to a higher energy level when it absorbs energy. This energy is released when the electron returns to ground state.
According to the Bohr model, only certain size electron orbits are allowable hence the frequency and energy of the electron is quantized.
Learn more: https://brainly.com/question/25150590
why concentrated acid is hazardous material
Answer:
Here's it.
Explanation:
Concentrated acids are very corrosive and dangerous chemicals that are commonly encountered in the laboratory. ... Concentrated acids may be fatal if inhaled; and can cause severe eye and skin burns, severe respiratory and digestive tract burns. Contact with other materials may cause a fire.
Answer:
The more concentrated acid something is the more strength it has.
Explanation:
If it is very strong it could melt a spoon, and burn human flesh, I don't think this needs further explanation.
write and balance sodium when it burns in air to form sodium peroxide
Answer:7.229 grams of oxygen is formed by the complete reaction of 35.23 g of metallic sodium with oxygen at 130–200 °C, a process that generates sodium oxide, which in a separate stage absorbs oxygen: 4 Na + O2 → 2 Na2O. The ozone oxidizes the sodium to form sodium peroxide.
NO2 is a reddish brown color while N2O4 is colorless. Based on this information only, which type of spectroscopy would be a good choice to determine the identity of an unknown sample that contains either
NO2 or N2O4?
Spectroscopy is is an area of science that deals with interaction of matter and the electromagnetic spectrum. Colorimetry can distinguish between a colorless and a colored substance.
The type of spectroscopy that would be a good choice to determine the identity of an unknown sample is a type of spectroscopy that deal with the interaction of visible light with matter.
A type of spectroscopy that deals with interaction of visible light with matter is colorimetry. Colorimetry can measure the concentration of a substance as a function of the amount of light that is absorbed by the substance.
Since NO2 has a reddish brown color, its concentration can be measured using colorimetry. The concentration of N2O4 can not be measured using colorimetry because it is colorless.
Learn more: https://brainly.com/question/14368034
Why do you think lone pairs of electrons create greater repulsion when located near other
lone pairs or bonding pairs? Orbitals containing lone pairs of electrons require more space
than orbitals containing bonding pairs. Why do you think this is the case? What does the
presence of one or more lone pairs of electrons do to the bond angles in a molecule (in other
words, do bond angles get larger, smaller, or remain unchanged?)
When there are lone pairs on the valence shell of the central atom in a molecule, the bond angle is decreased.
The shape of molecules depend on the number of electron pairs on the valence shell of the molecules. These electron pairs could be lone pairs or bond pairs. Lone pairs occupy more space around the central atom since it is attracted to only one nucleus compared to bond pairs which are attracted to two nuclei.
When lone pairs are present on the central atom in a molecule, they tend to "squeeze" the molecule thereby decreasing the bond angle in the molecule. Hence, presence of one or more lone pairs of electrons make the bond angles get smaller.
Learn more: https://brainly.com/question/10079361
what is the empirical formula of a compound that consists of 0.039 moles of iron atoms combined with 0.052 moles of oxygen atoms?
The empirical formula of a compound that consists of 0.039 moles of iron atoms combined with 0.052 moles of oxygen atoms is FeO[tex]\rmFeO_{2}[/tex].
What is empirical formula?The simplest whole number ratio of atoms in a compound is the empirical formula of a chemical compound in chemistry. Sulfur monoxide's empirical formula, SO, and disulfur dioxide's empirical formula are two straightforward examples of this idea.
The simplest whole number ratio of each type of atom in a compound is its empirical formula. It can be determined from data on the mass of each component in a compound or from the composition's proportion.
calculation:
Fe = 56/0.039 = 150
O = 16/0.052 = 300
in simplest term ratio is 1:2
Thus, empirical formula is FeO[tex]\rmFeO_{2}[/tex].
To learn more about empirical formula, refer to below link:
https://brainly.com/question/12805171
#SPJ2
1. Select the animals which are vertibrates
A. Tigers
B. Lions
C. Butterfly
D. Frogs
E. Ants
F. Spiders
G. Dogs
H. Cats
I. Eagles
J. Snail
Answer:
A.Tigers
B.Lions
C.Frogs
G.Dogs
H.Cats
I.Eagles
Diagrammatic Questions: m. Write the name of the elements of the given nucleus of the atoms.
11 p+
0n⁰
17 p+
18n⁰
5p+
6n⁰
11p+
12n⁰
19p+
20n⁰
Explanation:
Atomic;
Numb...
SymbolN
ame
Atomic Mass...1HHydrogen1.007972HeHelium4.002603LiLithium6.941
How many molecules are there in .230kg of CoCl2?
I have been trying to answer this question but everytime I get the answer it goes to 4.96e-19 or lower. I don't understand what I am doing wrong or what the right way to set up the question.
Answer:
CoCI2 molecular weight is 129.84 g/mole
230 CoCI2 divided by the molecular weight
230 g/ 129.84 g/mole = 1.77 moles of CoCI2