Engineering High School

How tall was President Abraham Lincoln?

Answers

Answer 1

6 feet 4 inches

6 feet 4 inchesThe tallest U.S. president was Abraham Lincoln at 6 feet 4 inches (193 centimeters)

make me brainalist

Answer 2

President Abraham Lincoln was 1.93 m tall

Related Questions

A small block sits at one end of a flat board that is 4.00 m long. The coefficients of friction between the block and the board are μs = 0.550 and μk = 0.400. The end of the board where the block sits is slowly raised until the angle the board makes with the horizontal is α0 , and then the block starts to slide down the board.
Part A
If the angle is kept equal to α0 as the block slides, what is the speed of the block when it reaches the bottom of the board?

Answers

The speed of the block when it reaches the bottom of the board would be 3.19 m/s.

How to calculate the speed?

Let's start by finding the height of the board when the block starts to slide. The maximum angle α0 at which the block will remain stationary on the board is given by:

μs = tan(α0)

Solving for α0, we get:

α0 = tan^-1(μs) = tan^-1(0.550) = 29.59 degrees

The height of the board when the block starts to slide is given by:

h = 4.00 m sin(α0)

h = 4.00 m sin(29.59 degrees)

h = 2.09 m

Now let's find the work done by friction. The friction force is given by:

f= μk * N

where N is the normal force acting on the block. The normal force is equal in magnitude and opposite in direction to the component of the gravitational force acting perpendicular to the board, which is given by:

N = mg cos(α)

where m is the mass of the block, g is the acceleration due to gravity, and α is the angle of the board. The kinetic friction force does negative work, which is equal to:

Wf = -f * d

where d is the distance the block travels down the board. The work done by gravity is equal to the change in potential energy, which is given by:

Wg = mgh

where h is the height of the board. At the bottom of the board, all of the potential energy has been converted to kinetic energy, so we have:

1/2 * m * v^2 = mgh - f * d

Solving for v, we get:

v = sqrt(2gh - 2μk(N/m) * d)

We can now substitute the values we have found:

h = 2.09 m

μk = 0.400

N = mg cos(α0) = mg cos(29.59 degrees)

d = 4.00 m

Substituting these values and solving for v, we get:

v = sqrt(2gh - 2μk(N/m) * d)

v = sqrt(2 * 9.81 m/s^2 * 2.09 m - 2 * 0.400 * (m * g * cos(29.59 degrees)/m) * 4.00 m)

v = 3.19 m/s

Therefore, the speed of the block when it reaches the bottom of the board is 3.19 m/s.

Learn more about speed in https://brainly.com/question/28224010

#SPJ1

Which of the following processes may leave blemishes or imperfections in a material jetting part?

Answers

Several processes involved in material jetting may leave blemishes or imperfections in a part.

What is the explanation for the above response?

Support material removal is a common process that can leave blemishes or imperfections if the support material is difficult to remove or if it is not removed carefully.

Also , layer thickness and nozzle diameter can also play a role in the quality of the part. If the layer thickness is too thin or if the nozzle diameter is too large, it can result in rough surface finishes or inconsistencies in the part's dimensions.

Finally, the material curing process can also result in blemishes or imperfections if the curing is uneven or incomplete. Overall, careful attention to the printing parameters and post-processing steps is necessary to ensure high-quality material jetting parts.

Learn more about blemishes at:

https://brainly.com/question/14945845

#SPJ1

Expresa cada proposición mediante la gráfica, conjunto, desigualdad y la notación de
intervalo.
a. La estatura de los jugadores de un equipo de baloncesto es menor a 1,98 m y mayor o
igual a 1,82 m.
b. Los niveles normales de glucosa en ayunas en un ser humano deben ser mayores o
iguales a 70 mg/dl y menores que 100 mg/dl.
c. El tiempo que tarda una persona en llegar a su trabajo es mayor a 5/6 hora y menor o
igual a 3/2 hora.
d. La categoría juvenil es para personas mayores a 15 años y menores o iguales a 18
años.
e. La temperatura de la ciudad de Cali regularmente es menor a 31° C y mayor o igual a
19°C.

Answers

a. The height of the players of a basketball team is less than 1.98 m and greater than or equal to 1.82 m.

The Graph:

Draw a number line with 1.82 and 1.98 marked on it. Shade the region between the two points, including the point at 1.82, but not 1.98.

Set:

H = {h | 1.82 ≤ h < 1.98}

Inequality:

1.82 ≤ h < 1.98

Interval Notation:

[1.82, 1.98)

b. Normal fasting glucose levels in a human should be greater than or equal to 70 mg/dl and less than 100 mg/dl.

Graph:

Draw a number line with 70 and 100 marked on it. Shade the region between the two points, including both endpoints.

Set:

G = {g | 70 ≤ g < 100}

Inequality:

70 ≤ g < 100

Interval Notation:

[70, 100)

c. The time it takes a person to get to work is greater than 5/6 hours and less than or equal to 3/2 hour.

Graph:

Draw a number line with 5/6 and 3/2 marked on it. Shade the region between the two points, not including 5/6, but including 3/2.

Set:

T = {t | 5/6 < t ≤ 3/2}

Inequality:

5/6 < t ≤ 3/2

Interval Notation:

(5/6, 3/2]

d. The youth category is for people over 15 years of age and under or equal to 18 years.

Graph:

Draw a number line with 15 and 18 marked on it. Shade the region between the two points, not including 15, but including 18.

Set:

Y = {y | 15 < y ≤ 18}

Inequality:

15 < y ≤ 18

Interval Notation:

(15, 18]

e. The temperature in the city of Cali is regularly less than 31° C and greater than or equal to 19°C.

Graph:

Draw a number line with 19 and 31 marked on it. Shade the region between the two points, including 19, but not 31.

Set:

T_Cali = {t | 19 ≤ t < 31}

Inequality:

19 ≤ t < 31

Interval Notation:

[19, 31)

Answers

Note that the Turbine and Compressor Control System consists of the Electronic Governor Control System for the Steam Turbine and the Anti-surge Control System for the Air Compressor, etc.

How does this work?

The control system is microprocessor-based, and it is secured against cyber security by an appropriate antivirus or firewall program. Dual redundant is regarded as a minimum at all applicable levels to assure system availability and dependability.

The system may indicate the state of redundancy and switch messages from dual to single mode. This status must be interfaced with DCS through a soft link. It has the capability of generating the "First Out" warning when a set of parameters is likely to trip the system.

Learn more about the Control System:
https://brainly.com/question/31452507
#SPJ1

Environmental factors along the path of migrating birds can play a big role in the health of those bird populations. Support this conclusion using evidence from both the text and the video.

Answers

Answer:

Explanation:

The text and video provide several pieces of evidence supporting the conclusion that environmental factors along the path of migrating birds can impact their health.

Firstly, the text explains that birds rely on specific habitats along their migratory routes for breeding, resting, and feeding. The destruction or alteration of these habitats due to factors such as climate change, pollution, and land development can have negative impacts on bird populations. For example, loss of wetlands has been linked to declines in shorebird populations, and destruction of forests has contributed to the decline of migratory songbirds.

Additionally, the video discusses how weather conditions, such as storms and temperature changes, can affect the timing and success of bird migrations. For example, unseasonably warm weather can cause birds to arrive at their breeding grounds too early, before food sources are available, and severe storms can result in high mortality rates for migrating birds.

Furthermore, the video highlights the role of human activities, such as hunting and the use of pesticides, in impacting bird populations. For example, hunting can lead to declines in bird populations, particularly in areas where birds are hunted during their migratory journeys. Pesticides can also have negative impacts on birds, including decreased egg production and weakened immune systems.

Overall, the evidence presented in both the text and video supports the conclusion that environmental factors along the path of migrating birds can play a significant role in the health and survival of those bird populations.

Of these common qualifications for Agriculture, Food, and Natural Resources careers, select those you already have or would like to gain.

A) physical strength, coordination, and dexterity

B) skills in working safely with equipment and machinery

C) accuracy and attention to detail

D) problem-solving skills

E) organizational skills

F) skills in communicating with, teaching, and supervising others

G) reliability and responsibility

Answer: C) accuracy and attention to detail. D) problem-solving skills. G) reliability and responsibility. I didn't know the answer at first but then I figured it out and got it right.

Answers

The answers to the given questions are:

C) accuracy and attention to detail. D) problem-solving skills. G) reliability and responsibility

What are the important traits?

It is my belief that possessing qualities such as precision, meticulousness, ability to troubleshoot, reliability and responsibility, could prove indispensable for one's career in Agriculture, Food and Natural Resources.

The ability to minutely observe details and ensure exactness assumes significance towards ensuring excellence in the realm of agricultural products, as well as safeguarding appropriate standards for food safety. Responding effectively to any potential issue or obstacle via thoughtful problem resolution is fundamental to surmounting challenges within related industries.

Undoubtedly, personnel exhibiting traits harmonious with reliability and responsibility are prone to cultivating trust-worthy relationships amongst clients, comrades, and superiors.

In essence, an amalgamation of these multifaceted skills and interlinked attributes can mark a requirement when seeking employment within the domains as mentioned above.

Read more about character traits here:

https://brainly.com/question/15229018

#SPJ1

a welder performance qualification test on 1" (25.4mm) thick plate. what range of base metal is the welder qualified to weld? How many tension specimens will be tested? And how many side bends will be tested?

Answers

A welder's accomplishment qualification test on an excellent" (25.4mm) thick plate determines their requirement range.

What does passing qualify the welder for?

According to AWS D1.1 Structural Welding Code for Steel, passing this test qualifies them to bind base metals with thicknesses 'tween 0.5" (12.7mm) and 2" (50.8mm).

The qualification test requires two pressure specimens, that assess stiffness, and four side bend specimens, which judge ductility and healthiness.

Answers

Sometimes used to strengthen plies and stiffen tread; they lie between tread and inner plies. (M) Belt

How to match the items

Two rings made of steel wires encased in rubber that hold tire sidewalls snugly against wheel rim. (E) Bead

Outer surface of tire that contacts road. (A) Tread.

Provides leakproof membrane for modern tubeless tire. (F) Inner liner

Antifriction elements that fit between inner and outer races. (G) Ball bearings

Cup or cone that rests on spindle or drive axle shaft. (B) Bearing

Newest tire identification system using metric values and international standards. (N) Tire labeling

Rubberized fabric and cords wrapped around the beads. (C) Sidewall

Outer part of tire extending from bead to tread. (L) Shoulder

Learn more about tread on

https://brainly.com/question/28705993

#SPJ1

What fused deposition modeling (FDM) material is impact resistant, semi-rigid, and used in composite materials?

Answers

One fused deposition modeling (FDM) material that fits the description of being impact resistant, semi-rigid, and used in composite materials is polycarbonate (PC) filament.

What fused deposition modeling material is impact resistant, semi-rigid, and used in composite materials?

Polycarbonate is a strong thermoplastic material known for its toughness, high impact resistance, and good thermal stability. It exhibits semi-rigid properties, meaning it has some flexibility while still maintaining its structural integrity.

Polycarbonate filament is commonly used in FDM 3D printers to produce parts that require high impact resistance, such as functional prototypes, automotive parts, aerospace components, and protective casings. It is also often used in composite materials, where it can be combined with other materials, such as carbon fiber or glass fiber, to further enhance its mechanical properties and create composite parts with improved strength, rigidity, and impact resistance. The resulting composite materials can be used in various applications that require lightweight, yet durable components with excellent impact performance.

Learn more about fused deposition at:

https://brainly.com/question/18188909

#SPJ1

Other Questions

He clambered towards her and Curled her into his arms. Explain this figure of speech Having freckles is dominant over not having freckles. If two individuals heterozygous for freckles have a child, what is the probability the child will have freckles? 0% 0% 25% 25% 50% 50% 75% 23- Find unit vectors that satisfy the stated conditions (a) Oppositely directed to v = and half the length of v. An art class cost $45 for material and $10 per class. A. What is the rate if change?B. What is the initial value?C. What is the independent variable?D. What is the dependent variable? Which was not an effect of fur trading on the Midwest?A. Trading posts were set up where fur traders settled. B. People left the Midwest in search of furs. C. Native Americans settled at the forts to farm and sell crops. D. Communities and major cities grew around the forts im your opinion, what can be done to address the problem of poverty directly in order to improve health outcomes? Stacey's Piano Rebuilding Company has been operating for one year. At the start of the second year, its income statement accounts had zero balances and its balance sheet account balances were as follows: Cash $8,600 Accounts payable $11,800 Accounts receivable 43,000 Unearned revenue 4,720 Supplies 2,600 Long-term note payable 61,700 Equipment 11,700 Common stock 2,700 Land 9,600 Additional paid-in capital 8,320 Building 36,300 Retained earnings 22,560Rebuilt and delivered five pianos in January to customers who paid $19,000 in cash. Received a $600 deposit from a customer who wanted her piano rebuilt. Rented a part of the building to a bicycle repair shop; received $850 for rent in January. Received $7,200 from customers as payment on their accounts. Received an electric and gas utility bill for $400 to be paid in February. Ordered $960 in supplies. Paid $2,300 on account in January. Received from the home of Stacey Eddy, the major shareholder, a $920 tool (equipment) to use in the business in exchange for 100 shares of $1 par value stock. Paid $16,500 in wages to employees who worked in January. Declared and paid a $2,200 dividend (reduce Retained Earnings and Cash). Received and paid cash for the supplies in (f). Required:Create T-accounts The following reaction is done at stp:n2 (g) + 3 h 2 (g) 2 nh 3 (g)if i.5 l of nitrogen gas are added to an excess of hydrogen gas, how many liters of nh3 gas will form? People commit unethical acts as a result of lack of care. Citing illustrations from Incident in the Park by Meja Mwangi, write an essay to validate this statement. A gas with a constant volume had an original pressure of 1150 torr and atemperature of 75. 0 "C. Pressure was decreased to 760 torr. What is the finaltemperature of the gas?A) -43. 0C B) 49. 6CC) 230CD) -251C Compltez les phrases suivantes par des paroles rapportes indirectement. attention aux temps verbauxMerci the best predictor of drug use for the first year of college is: question 49 options: family background. the peer group throughout high school. drug use during the senior year of high school. no such predictor exists. +ent willA circle with center (7,3) and radius of 5 is graphed below with a square inscribed inthe circle.+Dillon says to write the equation of the tangent line you need the opposite-reciprocalslope of the slope of the radius and Chelsey says you need to use the same slope asthe radius. Who is correct and why? Write the equation of the tangent line.Part B: Find the perimeter of BCDE. Please respond.The question is in the picture attached.The paragraph is in Spanish and so are the word options to choose from.Finally the numbers are were the words that are picked would go.Thank you! Do you think wealth taxes are a good idea? Why or why not? Defend your position. In congress, each of the 50 states is represented by 2 senators. If you choose a senator randomly, what is the probability that you will choose a senator that represents Georgia, South Carolina, and Florida? 3. 14 lab Detecting Network Change (files and lists) IN PYTHON PLEASE!! Securing a network from attacks means a network administrator is watching traffic and user activity. Change detection (CD) is a method used to track changes in your network. CD can detect files accessed during off hours to more complex algorithmic detections added to software applications that manage this process. This program is going to manage user login times and attempt to detect any change in a users typical login attempts. It will use an input file to store data and read the file using the csv. Reader( ) method. The file will contain a list of login_names, followed by login_time separated by commas. Write a program that first reads in the name of an input file, reads the information stored in that file and determines if the user login has occurred at off hour times. The company employees work from 9 am to 5 pm so any other time would be an off hour login attempt. If the login attempt is made after hours, store the user name and login time in a dictionary with the user name as the key. Display all anomaly attempts at the end of the program. If there are no questionable login attempts display No anomaly login attempts A plane monochromatic electromagnetic wave with wavelength =2. 0cm, propagates through a vacuum. Its magnetic field is described by >B =(Bxi^+Byj^)cos(kz+t), where Bx=1. 9106T,By=4. 7106T, and i^ and j^ are the unit vectors in the +x and +y directions, respectively. What is Sz, the z-component of the Poynting vector at (x=0,y=0,z=0) at t=0? What prophecy recorded in 1 Kings 13:2 was fulfilled by Josiah in Bethel (2 Kings 23:15-20)?Help, please Find the coordinates of the parallel translation P if it moves the point A(3; 2) to the point B(1; 4).