To form 1.4 mol of ammonia, you need 0.7 mol of nitrogen.
Ammonia is formed by combining nitrogenand hydrogenin a 1:3 ratio, as shown in the balanced chemical equation:
N₂ + 3H₂ → 2NH₃
To determine the amount of nitrogen needed to form 1.4 mol of ammonia, follow these steps:
1. Identify the stoichiometry of the reaction: 1 mol N2 reacts with 3 mol H2 to produce 2 mol NH3.
2. Divide the desired amount of ammonia (1.4 mol) by the stoichiometric coefficient of ammonia (2 mol): 1.4 mol / 2 mol = 0.7.
3. Multiply the result (0.7) by the stoichiometric coefficient of nitrogen (1 mol): 0.7 x 1 mol = 0.7 mol.
Therefore, you need 0.7 mol of nitrogen to form 1.4 mol of ammonia.
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
3. 80 mol O2 will produce how many moles of CO2? Include entire unit (mol) and
compound formula, 3 sig figs.
The 3.80 mol Oxygen will produce 2.17 mol CO₂.
Assuming complete combustion of the oxygen, the balanced chemical equation is:
2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O
For every 7 moles of O₂ consumed, 4 moles of CO₂ are produced. Therefore, we can use a proportion to calculate the number of moles of CO₂ produced by 3.80 mol of O₂:
Number of moles of CO₂ produced= number of moles of O₂ x (4 moles of CO₂ are produced/7 moles of O₂ consumed)
Number of moles of CO₂ produced= (4 mol CO₂ / 7 mol O₂) x 3.80 mol O₂
Number of moles of CO₂ produced = 2.17 mol
Therefore, 2.17 mol CO₂ will result from 3.80 mol O₂. The compound formula is C₂H₆ .
To learn more about moles visit:
https://brainly.com/question/29367909
#SPJ11
Calculate the amount of electrical energy (in kWh) needed to produce
1.00E3 kg of aluminum using electrolysis if the applied voltage is 6.00 V. (1
kWh = 3.6E6 J)
The amount of electrical energy (in kWh) needed to produce 1 kWh of electrical energy is 1 kWh or 3.6E6 J. The actual amount of energy needed may vary depending on the efficiency of the power generation system used.
A kilowatt-hour is a unit of energy commonly used by electric companies to measure the amount of energy consumed by households or businesses over a period of time. One kilowatt-hour (kWh) is equal to the amount of energy consumed by a 1,000 watt appliance for one hour.
We know that 1 kWh is equal to 3.6E6 J (joules). This means that to produce 1 kWh of electrical energy, we need to generate 3.6E6 J of energy.
In practical terms, the amount of electrical energy needed to produce 1 kWh depends on the efficiency of the power generation system. For example, a coal-fired power plant may require more energy input (e.g. coal) to generate 1 kWh of electrical energy compared to a renewable energy source such as solar or wind power.
For more such questions on electrical energy
https://brainly.com/question/10294808
#SPJ11
How do people tend to use land as the human population increases?
A. Developed land is converted to wetlands.
B. More land becomes available for wildlife habitats.
C. Urban land becomes cropland.
D. Grasslands are used for cropland
D. Grasslands are converted to cropland
As the human population grows, individuals use land in a variety of ways to suit their requirements, including housing, agriculture, industry, and transportation.
This usually results in more urbanization and the change of natural habitats to human-dominated environments. Some examples of common land-use shifts are:
D. Grasslands are converted to cropland: As food need grows, grasslands are frequently converted to cropland for agricultural production. This can result in soil degradation, biodiversity loss, and other environmental consequences.
As the human population expands, so does the need for resources and space, resulting in a variety of changes in land usage. The conversion of natural habitats such as forests and grasslands into human-dominated landscapes is one of the major land-use shifts.
This process, referred to as urbanization, frequently includes the creation of buildings, roads, and other infrastructure to support human activity. Furthermore, as the demand for food and other agricultural products grows, more land is converted to agriculture.
These land-use changes can have serious environmental consequences, such as habitat loss, soil degradation, and biodiversity loss. As a result, it is critical to think about the potential repercussions of land usage and design sustainable practices that balance human demands with environmental conservation.
learn more about the population here
https://brainly.com/question/29367909
#SPJ1
You are given 7. 69x10^23 molecules of HNO3. How many liters do you
have?
Pls help
Answer:
7.3
Explanation:
0.97 g of product were generated in a reaction, which corresponds to 63.1% yield. what is the theoretical yield of this reaction in grams?
The theoretical yield of this reaction in grams is approximately 1.54 g.
The theoretical yield of a reaction is the maximum amount of product that could be obtained if the reaction went to completion. In this case, since we know the actual yield (0.97 g) and the percent yield (63.1%), we can use this information to calculate the theoretical yield.
First, we can use the percent yield formula to calculate the actual amount of product that was expected based on the theoretical yield:
Percent yield = (actual yield / theoretical yield) x 100
Rearranging this formula, we can solve for the theoretical yield:
Theoretical yield = actual yield / (percent yield / 100)
Plugging in the values we know, we get:
Theoretical yield = 0.97 g / (63.1 / 100) = 1.54 g
Therefore, the theoretical yield of this reaction is 1.54 g. This means that if the reaction had gone to completion, we would have expected to obtain 1.54 g of product. The actual yield of 0.97 g represents only 63.1% of the theoretical yield.
Learn more about theoretical yield at https://brainly.com/question/25996347
#SPJ11
how the pollution affected our planet
how many moles of aluminum oxide AI2O3 can you produce if you have two moles of AI
A 0.205g sample of caco3 is added to a flask with 7.50ml of 2.00 m hcl.
caco3(aq)+2hcl(aq)-cacl2(aq) + h2o(l) + co2
enough water is added to make a 125.0ml solution.a 10.00ml aliquot of this solution is taken and titred with 0.058 naoh
naoh (aq) + hcl - h2o + nacl
how many ml of naoh are used?
The volume of [tex]NaOH[/tex] used to titrate the[tex]HCl[/tex] is 5.80 mL
First, we need to find the number of moles of [tex]HCl[/tex] that reacted with the [tex]CaCO3[/tex].
2 mol [tex]HCl[/tex] react with 1 mol [tex]CaCO3[/tex]
Moles of [tex]HCl[/tex] = (7.50 mL) x (2.00 mol/L) = 0.015 mol [tex]HCl[/tex]
From the balanced equation, we see that 1 mol of [tex]CaCO3[/tex] reacts with 2 mol of [tex]HCl[/tex]. Therefore, the number of moles of [tex]CaCO3[/tex] in the original 0.205 g sample is:
Moles of[tex]CaCO3[/tex] = 0.205 g / 100.09 g/mol = 0.002049 mol [tex]CaCO3[/tex]
Since 1 mol of [tex]CaCO3[/tex] produces 1 mol of [tex]CO2[/tex], we have:
Moles of[tex]CO2[/tex]produced = 0.002049 mol [tex]CaCO3[/tex]
Now we need to calculate the concentration of [tex]CO2[/tex] in the final 125.0 mL solution.
Concentration of [tex]CO2[/tex] = Moles of [tex]CO2[/tex] produced / Volume of solution
Concentration of [tex]CO2[/tex] = 0.002049 mol / 0.125 L = 0.0164 mol/L
Finally, we can use the balanced equation for the titration reaction to calculate the number of moles of [tex]NaOH[/tex]used.
1 mol [tex]NaOH[/tex] reacts with 1 mol [tex]HCl[/tex]
Moles of [tex]NaOH[/tex] used = (0.058 L) x (0.1000 mol/L) = 0.0058 mol [tex]NaOH[/tex]
Since the volume of the aliquot is 10.00 mL or 0.0100 L, the concentration of [tex]HCl[/tex] is:
Concentration of [tex]HCl[/tex] = Moles of NaOH used / Volume of [tex]HCl[/tex]
Concentration of [tex]HCl[/tex] = 0.0058 mol / 0.0100 L = 0.580 M
Therefore, the volume of [tex]NaOH[/tex] used to titrate the [tex]HCl[/tex]is:
Volume of [tex]NaOH[/tex] = (0.580 M) x (0.0100 L) = 0.00580 L or 5.80 mL
So, the answer is 5.80 mL.
To know more about titration refer to-
https://brainly.com/question/31271061
#SPJ11
D. When the astronauts get this water in space they perform electrolysis and only are able to
experimentally make 43,200g of O₂. Using this as your experimental (actual) yield and your answer
from part C as your theoretical, calculate the percent yield of Oxygen.
actual yield
theoretical yield
x 100%
percent yield
=
Answer:
The theoretical yield of oxygen (O2) can be calculated using the balanced chemical equation:
2 H2O(l) → 2 H2(g) + O2(g)
From part (c), we calculated that 90.0 g of water (H2O) can produce 31.98 g of oxygen (O2). Therefore, the theoretical yield of oxygen from 43,200 g of water is:
theoretical yield = (31.98 g O2 / 90.0 g H2O) x 43,200 g H2O
theoretical yield = 15,379.2 g O2
The percent yield of oxygen can be calculated using the formula:
percent yield = (actual yield / theoretical yield) x 100%
Substituting the given values, we get:
percent yield = (43,200 g / 15,379.2 g) x 100%
percent yield ≈ 280.9%
This result seems unusually high, and suggests an error in the calculations or experimental data. A percent yield greater than 100% indicates that the actual yield is greater than the theoretical yield, which is usually not possible due to limitations in the reaction conditions or experimental procedures.
A scientist collected a sample of sedimentary rock from a high elevation in the Himalaya Mountains. Using what he knows about the rock cycle and how major landforms are created on Earth, what could the scientist infer about how the sedimentary rock became part of this mountain range?
The scientist could infer that the sedimentary rock in the Himalaya Mountains was formed through processes like weathering, erosion, deposition, and lithification. The rock cycle played a crucial role in creating this landform.
Tectonic plate movement and the collision between the Indian and Eurasian plates led to the uplift and folding of these sedimentary layers, ultimately forming the high elevation mountain range.
Based on the rock cycle and the formation of major landforms, the scientist could infer that the sedimentary rock was most likely formed from the accumulation of sediment in a low-lying area, such as a river delta or shallow sea. Over time, the sediment was buried and compacted, eventually forming sedimentary rock.
This rock was then subjected to tectonic forces, likely as a result of the collision of two tectonic plates, which caused it to be uplifted and exposed at a high elevation in the Himalaya Mountains.
Therefore, the scientist could infer that the sedimentary rock became part of the mountain range through a combination of geological processes, including sedimentation, compaction, tectonic activity, and uplift.
To know more about rock cycle:
https://brainly.com/question/29548493
#SPJ11
What is the molarity of a solution made by dissolving 2. 0 mol of solute in 6. 0 L of solvent?
The molarity of the solution is 0.33 M.
To calculate the molarity, you need to divide the moles of solute by the volume of the solvent in liters. In this case, you have 2.0 moles of solute and 6.0 liters of solvent. Using the formula M = moles/volume, you can find the molarity of the solution:
M = (2.0 moles) / (6.0 L)
M = 0.33 M
This means that the concentration of the solute in the solution is 0.33 moles per liter. Molarity is an important concept in chemistry as it helps in determining the concentration of a particular substance in a solution and is useful in various calculations and reactions.
To know more about moles click on below link:
https://brainly.com/question/26416088#
#SPJ11
Coach pollard still thinks he is really fast and so he went out to sprint at the track meet. he ran at a velocity of 4 m/s. his mass is about 68 kg. about how much kinetic energy did coach pollard use before he inevitably hurt himself after the run? ke=1/2mv^2
Coach Pollard used about 544 J of kinetic energy during his sprint.
Kinetic energy is the energy possessed by a moving object due to its motion. In this case, Coach Pollard's kinetic energy is directly proportional to his mass and the square of his velocity. As he runs faster or has more mass, his kinetic energy will increase accordingly. This is important to consider in athletics and sports where energy and power are key factors in performance.
The kinetic energy of Coach Pollard can be calculated using the formula KE = 1/2mv², where m is the mass of Coach Pollard and v is his velocity. Substituting the given values, we get KE = 1/2 × 68 kg × (4 m/s)² = 1/2 × 68 kg × 16 m²/s² = 544 J. As a result, Coach Pollard used approximately 544 J of kinetic energy throughout his sprint.
To know more about the Kinetic energy, here
https://brainly.com/question/20411782
#SPJ4
14. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . Write the complete balanced molecular equation(s) below of the reaction(s) that occurred, including the states of matter. HINT: Try writing ALL possible reactions that could have been created, and then decide which reactions actually occurred.
An unknown solution can be tested to see if it contains magnesium nitrate or strontium nitrate by combining it with potassium carbonate and potassium sulphate. For each reaction, the balanced molecular equations are given.
What causes aqueous solutions to precipitate?A "chemical process occurring in an aqueous solution when two or more ionic bonds combine, producing an insoluble salt," is what is referred to as a "precipitation reaction." precipitation is the insoluble salts that result from the precipitation processes.
What activities do aqueous solutions take?Precipitation reactions, acid-base reactions, and oxidation-reduction (or redox) reactions are the three primary categories of aqueous reactions.
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
The solubility of Ag,PO, in water at 25 °C is 4.3 x10-5 M. What is Ksp for Ag3PO? A) 2.1 x 10-12 B) 1.8 x 109 C) 9.2 × 10-17 D) 3.1 × 10-17
The solubility of Ag and PO, in water at 25 °C is 4.3 x10-5 M. The Ksp for Ag3PO is 2.1 x 10-12. Thus, option A) is correct.
Solubility refers to the maximum amount of a substance that can dissolve in a given solvent at a certain temperature and pressure. In this case, Ag3PO4 has a solubility of 4.3 x 10-5 M in water at 25°C. The Ksp (solubility product constant) for Ag3PO4 can be calculated using the following equation:
Ag3PO4(s) ⇌ 3Ag+(aq) + PO43-(aq)
Ksp = [Ag+]3 [PO43-]
To calculate Ksp, we need to determine the concentration of Ag+ and PO43- ions in solution. Since Ag3PO4 dissociates into three Ag+ ions and one PO43- ion, the concentration of Ag+ ions will be three times the solubility of Ag3PO4:
[Ag+] = 3(4.3 x 10-5 M) = 1.29 x 10-4 M
The concentration of PO43- ions will be equal to the solubility of Ag3PO4:
[PO43-] = 4.3 x 10-5 M
Now, we can plug these concentrations into the Ksp equation:
Ksp = (1.29 x 10-4)3 (4.3 x 10-5) = 2.1 x 10-12
Therefore, the answer is A) 2.1 x 10-12.
To know more about solubility, visit:
https://brainly.com/question/28170449#
#SPJ11
If 66. 38 g of potassium chloride reacts with fluorine and produces potassium fluoride and chlorine how many moles of chlorine can you get?
When 66.38 g of potassium chloride reacts with fluorine, you can obtain 0.4452 moles of chlorine.
To find out how many moles of chlorine you can get when 66.38 g of potassium chloride reacts with fluorine to produce potassium fluoride and chlorine, you'll need to follow these steps:
1. Write the balanced chemical equation for the reaction:
2 KCl + F2 → 2 KF + Cl2
2. Determine the molar mass of KCl (potassium chloride):
39.10 g/mol (K) + 35.45 g/mol (Cl) = 74.55 g/mol
3. Convert the given mass of KCl (66.38 g) to moles:
(66.38 g KCl) / (74.55 g/mol) = 0.8904 mol KCl
4. Use the stoichiometry from the balanced equation to determine the moles of Cl2 (chlorine) produced:
(0.8904 mol KCl) x (1 mol Cl2 / 2 mol KCl) = 0.4452 mol Cl2
So, when 66.38 g of potassium chloride reacts with fluorine, you can obtain 0.4452 moles of chlorine.
To know more about potassium chloride refer here: https://brainly.com/question/22528097#
#SPJ11
Which of these ionization processes requires the highest amount of
energy?
(a) na(g) --> na*(g) + e;
(b) mg(g) --> mg (g) + e;
(c) al(g) --> alt(g) + e;
(d) ca(g) --> ca*(g) + e;
The ionization process that requires the highest amount of energy is (d) ca(g) --> ca*(g) + e, as calcium has a higher ionization energy than the other elements listed.
To answer this question, we need to consider the ionization energy for each element involved. Ionization energy is the amount of energy required to remove an electron from an atom or ion in the gaseous state. The ionization processes mentioned are:
(a) Na(g) --> Na+(g) + e-
(b) Mg(g) --> Mg+(g) + e-
(c) Al(g) --> Al+(g) + e-
(d) Ca(g) --> Ca+(g) + e-
Comparing the first ionization energies for these elements:
Na: 496 kJ/mol
Mg: 738 kJ/mol
Al: 577 kJ/mol
Ca: 590 kJ/mol
Process (b) Mg(g) --> Mg+(g) + e- requires the highest amount of energy, as magnesium has the highest ionization energy among the given elements.
To know more about ionization energy:
https://brainly.com/question/20658080
#SPJ11
A rock contains one-fourth of its original amount of potassium-40. The half life of potasium-40 is 1. 3 billion years. Calculate the rock´s age
The age of the rock is approximately 2.6 billion years.
The fact that the rock contains one-fourth of its original amount of potassium-40 means that three-quarters of the original potassium-40 has decayed.
Since the half-life of potassium-40 is 1.3 billion years, this means that the rock has gone through two half-lives of decay.
To calculate the age of the rock, we can use the following formula:
age = number of half-lives x half-life
In this case, the number of half-lives is 2 and the half-life is 1.3 billion years. Plugging these values into the formula, we get:
age = 2 x 1.3 billion years
age = 2.6 billion years
to know more about age of the rock refer here:
https://brainly.com/question/31257496#
#SPJ11
6
camryn will: attempt 1
question 15 (3 points)
a steam turbine has an efficiency of 40.0%. a steam engine has an efficiency of
25.0%. suppose both devices are provided with 1000 j of thermal energy. how much
more useful work will the steam turbine do? show your work.
pa..
в у
h.
Steam turbine will do 150 J more useful work
Given the efficiency of both a steam turbine (40.0%) and a steam engine (25.0%), we can calculate the amount of useful work each device can do when provided with 1000 J of thermal energy.
For the steam turbine:
Efficiency = (Useful work output) / (Input energy)
0.4 = (Useful work output) / (1000 J)
Useful work output = 0.4 * 1000 J = 400 J
For the steam engine:
Efficiency = (Useful work output) / (Input energy)
0.25 = (Useful work output) / (1000 J)
Useful work output = 0.25 * 1000 J = 250 J
Now, we can find the difference in useful work between the two devices:
Difference = Useful work (steam turbine) - Useful work (steam engine)
Difference = 400 J - 250 J = 150 J
So, the steam turbine will do 150 J more useful work than the steam engine when provided with 1000 J of thermal energy.
To know more about efficiency:
https://brainly.com/question/1634438
#SPJ11
Calculate the volume of 2. 30 moles of gas exerting a pressure of 2. 80 atm at 155°C.
The volume of 2. 30 moles of gas exerting a pressure of 2. 80 atm at 155°C is 84.7 L.
We can use the ideal gas law to solve for the volume:
PV = nRT
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature to Kelvin:
155°C + 273.15 = 428.15 K
Next, we can plug in the values and solve for V:
V = (nRT) / P
V = (2.30 mol * 0.08206 Latm/molK * 428.15 K) / 2.80 atm
V = 84.7 L
Therefore, the volume of 2.30 moles of gas exerting a pressure of 2.80 atm at 155°C is 84.7 L.
To know more about the ideal gas law refer here :
https://brainly.com/question/28257995#
#SPJ11
What happened to the concentration of the ions as the water evaporates
As water evaporates, the concentration of ions in the remaining solution will increase.
This is because as water evaporates, it leaves behind the dissolved ions, which become more concentrated in the remaining solution. The extent of this concentration increase will depend on the initial concentration of the ions in the original solution and the rate of water evaporation.
In general, the longer the water is allowed to evaporate, the more concentrated the remaining solution will become.
For example, imagine a solution containing salt dissolved in water. As the water evaporates, the concentration of salt ions in the solution will increase, making the solution increasingly salty. If the solution is left to evaporate completely, all the water will eventually be gone and only the salt crystals will remain.
In this case, the concentration of salt ions will be at its maximum.
Overall, the concentration of ions in a solution will increase as water evaporates, resulting in a more concentrated solution. This can have implications for a variety of processes, from cooking to chemical reactions, where precise control of ion concentration may be necessary for the desired outcome.
To know more about concentration of ions, visit:
https://brainly.com/question/14526375#
#SPJ11
∆E = −33 kJ/mol Ea = 20 kJ/mol What is E a′ ?
Answer in units of kJ/mol.
The value of Ea′ is -53 kJ/mol, and it represents the energy released during the chemical reaction.
The given values ∆E = −33 kJ/mol and Ea = 20 kJ/mol represent the activation energy and the change in energy, respectively, for a chemical reaction. The activation energy, Ea, is the minimum energy required for the reaction to occur, while the change in energy, ∆E, represents the difference between the energy of the reactants and the energy of the products.
The relationship between the activation energy, Ea, and the change in energy, ∆E, can be expressed using the equation: ∆E = Ea + Ea′ where Ea′ represents the energy released during the reaction. Since the change in energy and the activation energy are given, we can rearrange the equation to solve for Ea′: Ea′ = ∆E - Ea
Substituting the given values, we get: Ea′ = −33 kJ/mol - 20 kJ/mol = -53 kJ/mol. Therefore, the value of Ea′ is -53 kJ/mol. This negative value indicates that the reaction is exothermic, meaning that it releases energy as it proceeds. The magnitude of the value (-53 kJ/mol) indicates that the energy released during the reaction is significant.
In summary, the value of Ea′ is -53 kJ/mol, and it represents the energy released during the chemical reaction. This value can be calculated using the equation Ea′ = ∆E - Ea, where ∆E is the change in energy and Ea is the activation energy.
For more such on energy visit:
https://brainly.com/question/1634438
#SPJ11
Part B
One of the main components of an airbag is the gas that fills it. As part of the design process, you need to determine the exact amount of nitrogen that should be produced. Calculate the number of moles of nitrogen required to fill the airbag. Show your work. Assume that the nitrogen produced by the chemical reaction is at a temperature of 495°C and that nitrogen gas behaves like an ideal gas. Use this fact sheet to review the ideal gas law.
Part C
Recall the balanced chemical equation from part B of task 1:
2NaN3 → 2Na + 3N2.
Calculate the mass of sodium azide required to decompose and produce the number of moles of nitrogen you calculated in part B of this task. Refer to the periodic table to get the atomic weights
To calculate the number of moles of nitrogen required to fill the airbag, we need to use the ideal gas law.
We know the temperature of the nitrogen gas produced by the chemical reaction, which is 495°C, and we assume that it behaves like an ideal gas.
We also know the volume of the airbag, which we can use to calculate the number of moles of nitrogen using the ideal gas law equation PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.
Once we have calculated the number of moles of nitrogen required, we can move on to part C of the question, which asks us to calculate the mass of sodium azide required to produce that amount of nitrogen.
To do this, we need to refer to the balanced chemical equation given in part B and use the atomic weights from the periodic table to calculate the mass of sodium azide needed.
To know more about ideal gas law click on below link:
https://brainly.com/question/28257995#
#SPJ11
How many magnesium ions are contained in 4.5 moles of magnesium phosphate?
8.13 x 10²⁴ magnesium ions in 4.5 moles of magnesium phosphate.
To determine the chemical formula for magnesium phosphate. Magnesium has a 2⁺ charge, and phosphate has a 3⁻ charge, so the chemical formula for magnesium phosphate is Mg₃(PO₄)₂.
Next, we need to use the coefficients in the formula to determine the number of magnesium ions in 4.5 moles of magnesium phosphate. There are 3 magnesium ions in one molecule of magnesium phosphate, so we can set up a proportion:
3 Mg ions / 1 Mg₃(PO₄)₂ molecule = x Mg ions / 4.5 moles Mg₃(PO₄)₂
Solving for x, we get:
x = 3 Mg ions / 1 Mg₃(PO₄)₂ molecule × 4.5 moles Mg₃(PO₄)₂
x = 13.5 moles Mg ions
Therefore, there are 13.5 moles of magnesium ions in 4.5 moles of magnesium phosphate. However, if we want to convert this to a more common unit, we can use Avogadro's number to convert moles to atoms or ions:
13.5 moles Mg ions × 6.022 x 10²³ions/mol = 8.13 x 10²⁴ Mg ions
Therefore, there are approximately 8.13 x 10²⁴ magnesium ions in 4.5 moles of magnesium phosphate.
To know more about Avogadro's number :
https://brainly.com/question/859564
#SPJ11
How many grams of magnesium can be heated to raise the temperature 45 C and absorb 843 J of energy
Explanation:
You will need the specific heat of Mg which I found to be 1.02 J / (g C)
m * 45 C * 1.02 J . (g C) = 843
m = 843 / (45* 1.02) = 18.4 g of Magnesium
PLEASE HELP FAST.
Perform the following
mathematical operation, and
report the answer to the
appropriate number of
significant figures.
1. 6524 + 5. 67 = [ ? ]
The answer to the appropriate number of significant figures is 6530.67.
Explanation:
When adding two numbers, the number of decimal places in the result should be the same as the number of decimal places in the number with the fewest decimal places. In this case, 6524 has no decimal places and 5.67 has two decimal places. Therefore, the answer should have two decimal places.
When adding whole numbers, the number of significant figures in the result should be the same as the number of significant figures in the number with the fewest significant figures. In this case, both numbers have four significant figures. Therefore, the answer should also have four significant figures.
Adding the two numbers gives:
6524
+ 5.67
-------
6530.67
Therefore, the answer to the appropriate number of significant figures is 6530.67.
To know more about significant figures, click below.
https://brainly.com/question/2988127
#SPJ11
Predict which substances would have the highest volatility. explain why. ch3ch2oh c6h6 ch3och3h2opredict which substances would have the highest surface tension. explain why. h2och4ch3och3ch3oh
Predicting the substances with the highest volatility, the substances you've provided are ethanol (CH3CH2OH), benzene (C6H6), dimethyl ether (CH3OCH3), and water (H2O). Among these, dimethyl ether (CH3OCH3) has the highest volatility. This is because volatility is directly related to the strength of intermolecular forces.
Dimethyl ether has weak Van der Waals forces, making it easier for molecules to evaporate from the liquid phase to the gas phase. Ethanol and water both have hydrogen bonding, while benzene has stronger dispersion forces, resulting in lower volatility for these substances.
For the substances with the highest surface tension, the provided substances are water (H2O), methane (CH4), dimethyl ether (CH3OCH3), and methanol (CH3OH). Among these, water (H2O) has the highest surface tension. Surface tension arises from the imbalance of intermolecular forces near the surface of a liquid.
Water has strong hydrogen bonding, causing the molecules at the surface to be attracted to each other, creating a high surface tension. Methane has weak Van der Waals forces, while dimethyl ether and methanol have intermediate forces between hydrogen bonding and Van der Waals forces, resulting in lower surface tensions for these substances.
To know more about highest volatility refer here
brainly.com/question/30354221#
#SPJ11
Hurry!!!!!! help pleaseee i reallllyyyy need help
1. you may recall that the products of the complete combustion of a hydrocarbon are water vapor and carbon dioxide gas. write the balanced equation showing the combustion of methane. do not forget to include the states of matter of the reactants and the products. hint: methane is a gas at standard temperature and pressure. (2pts)
balanced equation:
ch4(g)+202(g) -> co2(g)+2h2o(g)
to begin the experiment, 1.65g of methane ch4 is burned in a bomb calorimeter containing 1000 grams of water. the initial temperature of water is 18.98oc. the specific heat of water is 4.184 j/g oc. the heat capacity of the calorimeter is 615 j/ oc . after the reaction the final temperature of the water is 36.38oc.
2. calculate the change in temperature, δt. show your work. (1pt)
3. calculate the heat absorbed by water. use the formula qwater = m • c • δt
show your work (2pts)
4.calculate the heat absorbed by the calorimeter. use the formula:
qcal = ccal • δt show your work. (2pts)
5. the total heat absorbed by the water and the calorimeter can be calculated by adding the heat calculated in steps 3 and 4. the amount of heat released by the reaction is equal to the amount of heat absorbed with the negative sign as this is an exothermic reaction. (2pts)
a.using the formula δh = - (qcal + qwater ) , calculate the total heat of combustion. show your work.
b. convert heat of combustion (answer from part a) from joules to kilojoules. show your work.
6. evaluate the information contained in this calculation and complete the following sentence: (2pts)
this calculation shows that burning _______ grams of methane [takes in] / [gives off] energy (choose one).
7. the molar mass of methane is 16.04 g/mol. calculate the number of moles of methane burned in the experiment. show your work. (2pts)
8. what is the experimental molar heat of combustion in kj/mol? show your work. (2pts)
9. the accepted value for the heat of combustion of methane is -890 kj/mol . explain why the experimental data might differ from the theoretical value in 2-3 complete sentences. (2pts)
10. given the formula:
% error= |(theoretical value - experimental value)/theoretical value)| x 100
calculate the percent error. show your work. (2pts)
11. a 29.7 gram piece of aluminum is sitting on a hot plate. a student accidentally left the hot plate on. the aluminum now is very hot and has to be cooled. you fill a beaker with 250 grams of water. the aluminum is placed in the water. you are curious so you place a thermometer in the beaker. the water warms from 22.3 c to 30.8 c. the c (aluminum) is 0.900 j/gc, and the c (water) is 4.18 j/gc
do you have enough information to calculate the amount of energy transferred in this situation? explain in 2-3 complete sentences. (1pt)
Yes, there is enough information to calculate the amount of energy transferred in this situation. The heat energy transferred from the aluminum to the water is calculated by using the equation q = m•c•δt.
In this equation, q is the amount of heat energy transferred, m is the mass of the object, c is the specific heat capacity of the object and δt is the change in temperature of the object.
Knowing the mass of the aluminum and its specific heat capacity, as well as the change in temperature of the water, it is possible to calculate the amount of heat energy transferred from the aluminum to the water.
This will give an indication of the amount of energy that was released from the aluminum in this situation.
Know more about Aluminum here
https://brainly.com/question/9496279#
#SPJ11
How much 3. 0 M H2SO4 is needed to neutralize 50. ML of 1. 2 M AL(OH)3
The amount of H₂SO₄ needed is 30 mL, under the condition that the required amount is needed to neutralize 50. ML of 1. 2 M AL(OH)₃.
In order to solve this problem, we need to apply stoichiometry and the balanced chemical equation for the reaction between H₂SO₄ and AL(OH)₃.
The derived balanced chemical equation for this reaction is
2AL(OH)₃ + 3H₂SO₄ → Al₂(SO₄)₃ + 6H₂O
Now regarding the equation, we can evaluate that 3 moles of H₂SO₄ are necessary to react with 2 moles of AL(OH)₃.
We can apply this information to calculate how much H₂SO₄ is needed to neutralize 50 mL of 1.2 M AL(OH)₃.
Step 1, we need to calculate how many moles of AL(OH)₃ are present in 50 mL of 1.2 M solution:
Molarity = moles of solute / liters of solution
1.2 M = moles of AL(OH)₃ / 0.050 L
moles of AL(OH)₃ = 0.060 moles
Now we can apply stoichiometry to calculate how many moles of H₂SO₄ are required
moles of H₂SO₄ = (0.060 moles AL(OH)₃ x (3 moles H₂SO₄ / 2 moles AL(OH)₃
moles of H₂SO₄ = 0.090 moles
Finally, we can evaluate how many milliliters of 3.0 M H₂SO₄ are required
Molarity = moles of solute / liters of solution
3.0 M = 0.090 moles / liters of solution
liters of solution = 0.030 L
We need to convert liters to milliliters:
0.030 L x (1000 mL / 1 L)
= 30 mL
Hence, 30 mL of 3.0 M H₂SO₄ are necessary to neutralize 50 mL of 1.2 M AL(OH)₃.
To learn more about stoichiometry
https://brainly.com/question/30820349
#SPJ4
Ideal Gas Law --
PV=nRT
Standard Conditions these are listed on the back of the periodic table slightly different-look now
Pressure: 1 atm = 760 mmHg = 760 torr = 101.3 kPa
Temperature : 273 K = 0°C
To convert from °C to K add 273 to the °C temperature
To convert back to °C subtract 273 from the Kelvin temperature
*Reminder: R = 0.0821 L atm/mol K so volume must be in liters, pressure must be in atm, amount
mol K must be in moles NOT GRAMS, and temperature must be in kelvin
1. How many moles of gas are contained in 890.0 mL at 21.0 °C and 750.0 mm Hg pressure?
2. 1.09 g of H, is contained in a 2.00 L container at 20.0 °C. What is the pressure in this container?
3. Calculate the volume 3.00 moles of a gas will occupy at 24.0 °C and 762.4 mm Hg.
4. What volume will 20.0 g of Argon occupy at STP?
5. How many moles of gas would be present in a gas trapped within a 100.0 mL vessel at 25.0 °C
at a pressure of 2.50 atmospheres?
6. How many moles of a gas would be present in a gas trapped within a 37.0 liter vessel at 80.00
°C at a pressure of 2.50 atm?
7. If the number of moles of a gas is doubled, at the same temperature and pressure, will the volume increase or decrease?
8. What volume will 1.27 moles of helium gas occupy at STP?
9. At what pressure would 0.150 mole of nitrogen gas at 23.0 °C occupy 8.90 L?
10. What volume would 32.0 g of NO, gas occupy at 3.12 atm and 18.0 °C?
1. The number of moles that are contained in 890 ml at 21.0 °C and 750.0 mm Hg pressure is 0.0368 moles
The ideal gas law states
PV = nRT
where P is the pressure
V is the volume
n is the number of moles
R is the gas constant
T is the temperature
Given:
P = 760 mmHg
760 mmHg = 1 atm
P = 1 atm
T = 21° C = 21+273 K = 294 K
V = 890 ml = 0.89 L
Putting them in ideal gas law,
1 * 0.89 = n * 0.0821 * 294
n = 0.0368
2. The pressure of the container containing 1.09 g of H in a 2.00 L container at 20.0 °C is 6.55 atm
V = 2 L
n = 1.09/2 = 0.545
T = 20 + 273 K = 293 K
Putting them in ideal gas law,
P * 2 = 0.545 * 0.0821 * 293
P = 6.55 atm
3. The volume of 3.00 moles of gas will occupy at 24.0 °C and 762.4 mm Hg is 72.93 L
P = 762.4 mmHg
P = 1.003 atm
n = 3 moles
T = 24 + 273 K = 297 K
Putting them in ideal gas law,
V * 1.003 = 3 * 0.0821 * 297
V = 72.93 L
4. The volume of 20 g of Argon at STP is 11.2 L
P = 1 atm
T = 273 K
n = 20/40 = 0.5
Putting them in ideal gas law,
V * 1 = 0.5 * 0.0821 * 273
V = 11.2 L
5. The number of moles of gas that would be present in a gas trapped within a 100.0 mL vessel at 25.0 °C is 0.01
V = 100 ml = 0.1 L
T = 25 + 273 = 298 K
P = 2.5 atm
Thus, 2.5 * 0.1 = n * 0.0821 * 298
n = 0.01
6. The moles of gas that would be present in a gas trapped within a 37.0-liter vessel at 80.00 °C at a pressure of 2.50 atm is 3.19 moles
P = 2.5 atm
T = 80 + 273 K = 353 K
V = 37 L
Thus, 2.5 * 37 = 0.0821 * n * 353
n = 3.19
7. The volume will increase if the number of moles of a gas is doubled, at the same temperature and pressure
Keeping the temperature and pressure constant in the gas law we get,
V ∝ n
Thus, the volume is directly proportional to number of moles in this case.
8. The volume occupied by 1.27 moles of helium gas at STP is 28.46 L
P = 1 atm
T = 273 K
n = 1.27
Putting them in ideal gas law,
V * 1 = 1.27 * 0.0821 * 273
V = 28.46 L
9. At pressure 0.415 atm, 0.150 moles of nitrogen gas at 23.0 °C occupy 8.90 L
V = 8.9 L
T = 23 + 273 K = 300 K
n = 0.15 moles
Thus, P * 8.9 = 0.0821 * 0.15 * 300
P = 0.415 atm
10. The volume occupied by 32g of NO at 3.12 atm and 18.0 °C is 8.11 L
n = 32/30 = 1.06
P = 3.12 atm
T = 273 + 18 K = 291 K
Thus, 3.12 * V = 1.06 * 0.0821 * 291
V = 8.11 L
Learn more about Ideal Gas Law:
https://brainly.com/question/27870704
#SPJ1
What is the molarity of a solution if 1. 75 moles of KOH are dissolved in 2. 5 liters of water а 39 М с 0. 70 М b. 1А М d 4. 4M А В ОООО
To calculate the molarity of a solution, we need to know the number of moles of solute and the volume of the solution in liters.
a. 39 M solution with 0.70 M KOH:
Number of moles of KOH = 0.70 moles/Liter x 2.5 Liters = 1.75 moles
Volume of solution = 2.5 Liters
Molarity of solution = Number of moles of solute / Volume of solution = 1.75 moles / 2.5 Liters = 0.70 M
b. 1 A solution:
This question is incomplete, as it is not specified what solute is dissolved in the solution. Therefore, it is not possible to calculate the molarity of the solution without this information.
c. 4.4 M solution of ABOOOO:
It is not possible to calculate the molarity of this solution without more information about the solute dissolved in the solution. The chemical formula or name of the solute is needed to determine the number of moles present in the solution.
To know more about Molarity refer to-
https://brainly.com/question/16587536
#SPJ11