we need to add 0.20 moles of HCl to 1 liter of the buffer solution to achieve a pH of 8.56.
Steps
The Henderson-Hasselbalch equation for the buffer system is:
pH = pKa + log([A-]/[HA])
where pKa is the acid dissociation constant for ammonium ion (NH4+), [A-] is the concentration of ammonia (NH3), and [HA] is the concentration of ammonium ion (NH4+).
The pKa for NH4+ is 9.25, so:
pH = 9.25 + log([NH3]/[NH4+])
Substituting the given concentrations, we get:
8.56 = 9.25 + log([NH3]/0.96)
log([NH3]/0.96) = -0.69
[NH3]/0.96 = 0.21
[NH3] = 0.20 M
The balanced chemical equation for the reaction between HCl and NH3 can be used to determine how much HCl is necessary to reach this new concentration:
HCl + NH3 → NH4+ + Cl-
Calculating the amount of HCl required to convert some of the NH3 to NH4+ is all that is necessary because the buffer solution already includes NH4+ and Cl-. The required amount of NH4+ is:
[NH4+] = [NH3] = 0.20 M
The amount of HCl is needed is
0.20 mol NH3 × 1 mol HCl/1 mol NH3 = 0.20 mol HCl
Therefore, we need to add 0.20 moles of HCl to 1 liter of the buffer solution to achieve a pH of 8.56.
learn more about buffer solutions here
https://brainly.com/question/8676275
#SPJ1
What can you deduce about the molecular composition of the reactants in a chemical reaction with the following atomic masses?
Reactants: (12 + 1 + 1 + 1 + 1) + (24 +16) = 56 u
Stoichiometric amounts relate to the proportional amounts of reactants and products in a balanced chemical equation.
What transpires during a chemical reaction to the molecules of the reactants?
Only atoms from the reactants can wind up in the products of a chemical reaction. No atoms are annihilated or made into new ones. To create the products, the reactants come into contact with one another, the bonds between their atoms are broken, and the atoms then rearrange and establish new bonds.
The frequency of collisions between the two reactants will grow as the reactant concentration rises. There are times when collisions don't cause a response (atoms misaligned or insufficient energy, etc.). More collisions and reaction possibilities result from higher concentrations.
To learn more about atoms use:
https://brainly.com/question/6258301
#SPJ1
please help!!! A, B, C, or D
Answer:
A
Refer to pic for explanation
Magnesium carbonatea n d hydrochloric acid react to produce salt, water and carbon
dioxide.
MgcO, + 2 HCt m MgCh + H,0 +CO. .
What is the volume of CO, produced when 21 g of magnesium carbonate reacts
completely with excess hydrochloric acid?
A 4 dma
B 8dm°
C 6dm D 2dm
Answer:
Explanation:
The balanced chemical equation for the reaction between magnesium carbonate and hydrochloric acid is:
MgCO3 + 2HCl → MgCl2 + H2O + CO2
From the equation, we can see that 1 mole of magnesium carbonate reacts with 2 moles of hydrochloric acid to produce 1 mole of carbon dioxide. The molar mass of magnesium carbonate is 84.3 g/mol, which means that 21 g of magnesium carbonate is equal to 0.25 moles (21/84.3). Therefore, 0.25 moles of magnesium carbonate will react with 0.5 moles of hydrochloric acid to produce 0.25 moles of carbon dioxide.
The volume of carbon dioxide can be calculated using the ideal gas law, which is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Assuming standard temperature and pressure (STP) of 273 K and 1 atm, we can use the molar volume of a gas at STP, which is 22.4 L/mol, to calculate the volume of carbon dioxide produced.
V = n × 22.4 L/mol
V = 0.25 mol × 22.4 L/mol
V = 5.6 L
Therefore, the volume of carbon dioxide produced when 21 g of magnesium carbonate reacts completely with excess hydrochloric acid is 5.6 L. The answer is option A, 4 dm³, which is approximately equal to 5.6 L.
Which substance are needed for cellular respiration 
Answer: Oxygen and glucose are both reactants in the process of cellular respiration. The main product of cellular respiration
What is pasteurisation
Castration is the method of storing milk there was discovered by Louis Pasteur
Explanation:
Castration is the method of storing milk there was discovered by Louis Pasteur
Using a 500 mL beaker, a teacher stirred sugar into some water. The sugar seemed to disappear during the stirring process. The beaker was then placed on the teacher’s demonstration desk. A few days later all of the water evaporated, and sugar appeared in the bottom of the beaker. Which is the best evidence that no chemical reaction occurred? A.All the sugar evaporated. B.Sugar combined with water to form a new substance. C.Sugar is still in the beaker. D.All the sugar dissolved faster due to stirring by the teacher.
The best evidence that no chemical reaction occurred in the process described is that the sugar is still in the beaker after the water has evaporated. Therefore, the correct answer is C.
What is a chemical reaction?The chemical, known as the reactant, is changed into a new substance, the product, during a chemical reaction. Here, the atoms that make up the reactants are rearranged to form products. This is an irreversible process.
In the process described in the question, sugar was simply dissolved in water to form a sugar-water solution. This is a physical change, not a chemical change, because the sugar molecules remained intact and did not undergo a chemical reaction with the water molecules. The sugar molecules were simply dispersed throughout the water, making them invisible to the eye.
When the water evaporated, the sugar molecules were left behind and re-crystallized in the bottom of the beaker. This process did not involve a chemical reaction, only a physical change.
To know more about chemical changes, visit:
https://brainly.com/question/23693316
#SPJ1
Which of the following correctly describes delocalized valence electrons in a metal?
Group of answer choices
Valence electrons move from outer orbitals to inner orbitals of each atom.
Valence electrons move from inner orbitals to outer orbitals of each atom.
Valence electrons move between atoms in shared orbitals.
Valence elctrons move out of the orbitals and go into the air.
Valence electrons move between atoms in shared orbitals- correctly describes delocalized valence electrons in a metal
Why are valence electrons important and what do they do?
The outermost or valence shell electrons, known as valence electrons, are crucial because they shed light on an element's chemical characteristics and are the ones that are acquired, lost, or shared during a chemical reaction. In general, when an atom's outermost electron shell is complete, it is at its most stable and least reactive.
The number of valence electrons for neutral elements is the same as the number of the atom's main group. A periodic chart element's column can be used to determine its main group number. For instance, carbon, which belongs to group 4, has four external electrons.
To learn more about valence electrons use:
https://brainly.com/question/371590
#SPJ1
Answer the following:
The molecular formula of acetylene is C₂H₂ and ethylene is C₂H₄.
What is the difference between molecular and empirical formulas?The simplest whole-number ratio of the atoms in a compound is shown by empirical formulae, the number of each type of atom in a molecule is shown by molecular formulas, and the bonds between the atoms in a molecule are shown by structural formulas. The empirical formula of naphthalene is C₁₀H₈ and benzene is C₆H₆.
The chemical formula of the reactants and products are:
Na₂SO₄ + Ca(NO3)₂ → NaNO₃ + CaSO₄Mg + N₂ → MgN₂The balanced reactions are:
Hg(NO₃)₂ → HgO + 2NO₂ + O₂Ca₃(PO₄)₂(aq) + 4H₃PO₄(aq) → 3Ca(H₂PO₄)₂(aq)3NaOH(aq) + FeCl₃(aq) → Fe(OH)₃(aq) + 3NaCl(aq)Learn more about molecular formulas, here:
https://brainly.com/question/14425592
#SPJ1
Zn + 2HCI H2 + ZnCI2 caculate the grams of zinc chloride produced if .236 grams of zinc react completely
The grams of zinc chloride produced if .236 grams of zinc react completely is 0.492 grams
Grams calculation
The balanced chemical equation for the reaction is:
Zn + 2 HCl → H2 + ZnCl2
The molar mass of Zn is 65.38 g/mol and the molar mass of ZnCl2 is 136.29 g/mol.
To calculate the grams of zinc chloride produced, we first need to find the number of moles of zinc used in the reaction:
moles of Zn = mass of Zn / molar mass of Zn
moles of Zn = 0.236 g / 65.38 g/mol
moles of Zn = 0.00361 mol
From the balanced chemical equation, we can see that the stoichiometric ratio of Zn to ZnCl2 is 1:1. This means that 0.00361 mol of Zn will produce 0.00361 mol of ZnCl2.
To calculate the mass of ZnCl2 produced, we can use the following equation:
mass of ZnCl2 = moles of ZnCl2 x molar mass of ZnCl2
mass of ZnCl2 = 0.00361 mol x 136.29 g/mol
mass of ZnCl2 = 0.492 g
Therefore, if 0.236 grams of zinc react completely, 0.492 grams of zinc chloride will be produced.
Learn more about grams below.
https://brainly.com/question/29649764
#SPJ1
When 43 g of ethyl lactate, which has an empirical formula of C5H10O3, is burned in excess oxygen gas, how many grams of CO2 are formed? mC = 12.011 g/mol, mH = 1.00794 g/mol, and mO = 15.9994 g/mol.
Answer in units of g.
When 43 g of ethyl lactate is burned in excess oxygen gas, 80.098 g of CO2 are formed.
What is Molecular Formula?
A molecular formula represents the actual number and type of atoms that make up a molecule of a compound. It shows the chemical symbols for the different elements in the compound and the subscript numbers that indicate the number of atoms of each element. For example, the molecular formula for water is H2O, which shows that each molecule of water contains two hydrogen atoms (H) and one oxygen atom (O).
First, we need to determine the molecular formula of ethyl lactate. The empirical formula of C5H10O3 has a molecular weight of approximately 118 g/mol (5 * 12.011 g/mol for carbon + 10 * 1.00794 g/mol for hydrogen + 3 * 15.9994 g/mol for oxygen).
To find the molecular formula, we need to know the actual molecular weight of ethyl lactate. We can use the given amount of ethyl lactate (43 g) to calculate the number of moles:
n = m/M = 43 g / 118 g/mol = 0.3644 mol
Now, we need to find the molecular formula. We can do this by dividing the molecular weight (118 g/mol) by the empirical formula weight (which we already calculated as 118 g/mol):
118 g/mol / 118 g/mol = 1
This tells us that the empirical formula is also the molecular formula, so ethyl lactate is C5H10O3.
Now we can use the balanced chemical equation for the combustion of ethyl lactate:
C5H10O3 + 8 O2 → 5 CO2 + 5 H2O
From the equation, we can see that 1 mol of ethyl lactate produces 5 mol of CO2. We already calculated that we have 0.3644 mol of ethyl lactate, so we can use this to find the amount of CO2 produced:
n(CO2) = 5 mol CO2/mol ethyl lactate * 0.3644 mol ethyl lactate = 1.822 mol CO2
Finally, we can convert this to grams of CO2:
m(CO2) = n(CO2) * M(CO2) = 1.822 mol * 44.0095 g/mol = 80.098 g
Therefore, when 43 g of ethyl lactate is burned in excess oxygen gas, 80.098 g of CO2 are formed.
Learn more about Molecular Formula from given link
https://brainly.com/question/15960587
#SPJ1
Find the ΔHr0 for the reaction : 2HCl(aq) + Ca(OH)2(s) → CaCl2(s) + 2H2O(l)
The standard enthalpy change of reaction for the given reaction is -46.9 kJ/mol. Since the enthalpy change is negative, it indicates that the reaction is exothermic and releases energy in the form of heat.
What is Enthalpy?
Enthalpy (H) is a thermodynamic property that describes the total heat content of a system at constant pressure. It is a measure of the internal energy of a system, which includes the energy required to create or destroy the system as well as the energy required to maintain its temperature and pressure.
The standard enthalpy change of reaction (ΔHr0) can be determined using the standard enthalpies of formation (ΔHf0) of the reactants and products.
2HCl(aq) + Ca(OH)2(s) → CaCl2(s) + 2H2O(l)
The standard enthalpy change of reaction can be calculated using the following equation:
ΔHr0 = Σ(nΔHf0(products)) - Σ(nΔHf0(reactants))
ΔHf0(HCl(aq)) = -167.2 kJ/mol
ΔHf0(Ca(OH)2(s)) = -986.1 kJ/mol
ΔHf0(CaCl2(s)) = -795.8 kJ/mol
ΔHf0(H2O(l)) = -285.8 kJ/mol
Substituting the values into the equation, we get:
ΔHr0 = [2(ΔHf0(H2O(l))) + ΔHf0(CaCl2(s))] - [2(ΔHf0(HCl(aq))) + ΔHf0(Ca(OH)2(s))]
ΔHr0 = [2(-285.8 kJ/mol) + (-795.8 kJ/mol)] - [2(-167.2 kJ/mol) + (-986.1 kJ/mol)]
ΔHr0 = (-571.6 kJ/mol - 795.8 kJ/mol) - (-334.4 kJ/mol - 986.1 kJ/mol)
ΔHr0 = -1367.4 kJ/mol + 1320.5 kJ/mol
ΔHr0 = -46.9 kJ/mol
Therefore, the standard enthalpy change of reaction for the given reaction is -46.9 kJ/mol. Since the enthalpy change is negative, it indicates that the reaction is exothermic and releases energy in the form of heat.
Learn more about Enthalpy from given link
https://brainly.com/question/14047927
#SPJ1
a sample of crystaline compound when heated in an open test tube produced sevrral droplets of water on the cool upper region of the tube the residue
The presence of water droplets on the cool upper portion of the test tube after heating the compound suggests that water molecules are trapped within its crystal structure. If the substance were a real hydrate, heating it would have caused all of the water molecules to evaporate, leaving behind an anhydrous substance.
What do you mean by crystalline compound?
A substance is said to be crystalline if it contains a repeating pattern of well-defined, organised, three-dimensionally arranged atoms or molecules throughout its structure. The compound's distinctive crystalline shape comes from this ordered arrangement, which also gives it additional crystalline solid-specific physical and chemical features.Crystalline compounds can take on a variety of shapes, from straightforward atomic or molecule crystals to intricate mineral formations, and they can be made up of a variety of different elements and compounds. Crystalline substances include, among many others, diamond (carbon), sugar (sucrose), table salt (NaCl), and sugar.The presence of water droplets on the cool upper portion of the test tube after heating the compound suggests that water molecules are trapped within its crystal structure. If the substance were a real hydrate, heating it would have caused all of the water molecules to evaporate, leaving behind an anhydrous substance.
However, the residue created a yellow-brown solution after being further dissolved in water, which is a certain sign of contaminants. When dissolved in water, true hydrates always produce a clear, colourless solution. Thus, the fact that the residue resulted in a coloured solution implies that the compound had impurities.
Together, the water stains and contaminants in the leftovers indicate that the original substance was not a genuine hydrate, but rather a mixture of the anhydrous substance and water, which may have been non-stoichiometrically trapped inside the crystal lattice or adsorbed onto the surface of the crystals.
Learn more about crystalline compound click here:
https://brainly.com/question/28972400
#SPJ1
Please put the steps in order from 1-5 first correct answer gets Brainliest.
5. This energy is released with wavelengths and frequencies within the visible portion of the electromagnetic spectrum.
3. The excited state is not a stable configuration for the atom because there are lower energy
sublevels not filled, so e' eventually fall back to original energy levels (ground state)
1. Electrons start in the most stable arrangement, called the ground state
2. Electrons absorb energy from heat or electricity and move to a higher energy level, this is called the excited state
4. When they fall back, the electrons have to release the energy absorbed to
move to the excited state.
mark me brainliest thank you :)
Consider the balanced equation:
2 CH4 (g) + 3 O2 (g) + 2 NH3 ---> 2 HCN (g) + 6 H2O (g)
If 203.6 g of NH3 is reacted with excess CH4 and O2, what mass in grams of HCN is produced?
The mass (in grams) of HCN produced when 203.6 g of NH₃ reacts with excess CH₄ and O₂ is 323.4 g
How do I determine the mass of HCN produced?The mass of HCN produced when 203.6 g of NH₃ reacts with excess CH₄ and O₂ can be obtained as follow:
2CH₄(g) + 3O₂(g) + 2NH₃ -> 2HCN(g) + 6H₂O(g)
Molar mass of NH₃ = 17 g/molMass of NH₃ from the balanced equation = 2 × 17 = 34 g Molar mass of HCN = 27 g/molMass of HCN from the balanced equation = 2 × 27 = 54 gFrom the balanced equation above,
34 g of NH₃ reacted to produce 54 g of HCN
Therefore,
203.6 g of NH₃ will react to produce = (203.6 × 54) / 34 = 323.4 g of HCN
Thus, the mass of HCN produced is 323.4 g
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
which of the following is a single replacement reaction?
A) FeS+2HCl --> H2S+FeCl2
B) Fe+CuSO4 --> FeSO4+Cu
C) AgNO3+NaCl --> AgCl+NaNO3
D) None of the above
Answer: None of the above
Explanation:
Which of the following is not an assumption in Bohr's theory. a) Energy is not dissipated when electrons move in an orbital b) Electrostatic force balances force tending to throw electron out of orbital c) Pairing of electrons reduces orbital stability d) Electrons move from one orbital to another by either absorbing or radiating energy
Answer: C
Explanation: The assumption that pairing of electrons reduces orbital stability is not part of Bohr's theory.
Bohr's theory of atomic structure mainly focuses on the behavior of electrons in the atom and makes several key assumptions:
a) Energy is not dissipated when electrons move in an orbital (postulate of quantization)
b) Electrostatic force balances force tending to throw electron out of orbital (Coulomb's law)
d) Electrons move from one orbital to another by either absorbing or radiating energy (postulate of transitions)
Therefore, the correct answer is option (c) Pairing of electrons reduces orbital stability.
2 Al + 6 HCI 2 AICI, +3 H2 What mass of aluminum is required to produce 30 grams of H2
Answer:
269.8
Explanation:
The balanced chemical equation for the reaction between aluminum and hydrochloric acid is:
2 Al + 6 HCl -> 2 AlCl3 + 3 H2
From the equation, we can see that 2 moles of aluminum react with 3 moles of H2 to produce 2 moles of AlCl3. Therefore, the molar ratio of aluminum to hydrogen gas is 2:3.
To find the mass of aluminum required to produce 30 grams of H2, we need to use the molar mass of hydrogen gas and the molar ratio between aluminum and hydrogen gas. The molar mass of hydrogen is approximately 1 g/mol.
First, we need to calculate the number of moles of hydrogen gas produced:
30 g H2 x (1 mol H2/2 g H2) = 15 mol H2
Since the molar ratio of aluminum to hydrogen gas is 2:3, we can calculate the number of moles of aluminum required:
15 mol H2 x (2 mol Al/3 mol H2) = 10 mol Al
Finally, we can calculate the mass of aluminum required:
10 mol Al x (26.98 g Al/mol) = 269.8 g Al
Therefore, approximately 269.8 grams of aluminum are required to produce 30 grams of H2.
To be considered a cognitive psychologist, you typically need what degree?
All cognitive psychologists work in academia performing research. T OR F
If you want to pursue a career in cognitive psychology, it is important to participate in a DIS during your undergraduate career. T or F
A Ph.D. or Psy.D. in psychology with a cognitive psychology concentration is normally required to be categorized as a cognitive psychologist. Thus, the choice is between a Ph.D. and a Psy.D.
All cognitive psychologists work in academia performing research. T OR FFalse. While most cognitive psychologists do their study in academic institutions, some may work in governmental, nonprofit, or commercial organizations.
If you want to pursue a career in cognitive psychology, it is important to participate in a DIS during your undergraduate career. T or FFalse. It is not compulsory to pursue a career in cognitive psychology, even though taking part in a Directed Independent Study (DIS) during your undergraduate studies may be advantageous to get research experience in the field. Other options for developing one's research abilities and experience include working in a lab or doing an internship.
to know more about psychology here;
brainly.com/question/29436774
#SPJ1
Determine if each set of the quantum numbers is allowed or not allowed.
Rules Governing the Allowed Combinations of Quantum Numbers
The principal quantum range (n) can't be zero. The allowed values of n are consequently 1, 2, 3, 4, and so on. The angular quantum quantity (l) can be any integer between zero and n - 1. If n = 3, for example, l can be either 0, 1, or 2.
Which of the following units of quantum numbers are not allowed and why?The set of quantum numbers n=1,l=1,ml=0,ms=+21 is no longer viable for an electron.
Which of the following units quantum numbers is allowed?So right set of quantum numbers is n=2,l=1,m=0,s=+21.
Which of the following is an allowed set of quantum numbers for an electron in the 4p orbital?Solution : The designation `4p` indicates that the orbital has a important quantum number `n = 4` and an angular-momentum quantum wide variety `l = 1`. The magnetic quantum quantity can have any of the values `-1, 0`, or `+1`.
Learn more about quantum here;
https://brainly.com/question/2292596
#SPJ1
Which of these is an example of an agricultural use for radiation?
A. making heavy isotopes to find new elements.
B. irradiating wheat to kill fungus.
C. diagnostic procedures that image inside the body, such as a PET scan.
D. locating leaks in a water line in a building.
Irradiating wheat to kill fungus is an example of an agricultural use for radiation.
option B.
What is irradiation?Irradiation of agricultural products is a process in which ionizing radiation (such as gamma rays or electron beams) is used to eliminate harmful organisms such as bacteria, viruses, fungi, and insects that may be present in the products. The process involves exposing the product to a controlled dose of radiation, which kills or sterilizes the harmful organisms without significantly affecting the quality, taste, or nutritional value of the product.
Thus, irradiation can be used to eliminate pests and diseases in agricultural products, including grains, fruits, and vegetables. Irradiation of wheat can be used to eliminate fungi, insects, and other harmful organisms, improving the shelf life and quality of the product.
Learn more about irradiation here:
https://brainly.com/question/13049371
#SPJ1
Decaborane is a compound with the molecular formula B1014
What is the empirical formula of decaborane?
The empirical formula of decaborane is B5H7.
Empirical formula calculation.
To find the empirical formula of decaborane, we need to determine the simplest whole-number ratio of atoms in the compound.
The molecular formula of decaborane is B10H14, which means it contains 10 boron atoms and 14 hydrogen atoms.
To determine the simplest ratio of boron to hydrogen atoms, we can divide each by the greatest common factor (GCF) of the two numbers.
The GCF of 10 and 14 is 2, so we divide each by 2:
B10H14 becomes B5H7
Therefore, the empirical formula of decaborane is B5H7 from B10H14
Learn more about empirical formula below.
https://brainly.com/question/1603500
#SPJ1
calculate the weight 'm' grams of 5.6L of chlorine gas cl2 at NTP.
The weight of 5.6 L of chlorine gas Cl₂ at NTP is 17.75 grams
How do i determine the weight of the chlorine gas at NTP?The volume of a gas at normal temperature and pressure, NTP, is given as
22.4 L = 1 mole of a gas
With the above information, we can obtain the weight (in grams) of the 5.6 L of chlorine gas Cl₂. This is shown below.
The following data were obtained from the question:
Volume chlorine gas, Cl₂ at NPT = 5.6 L1 mole of chlorine gas, Cl₂ = (2 × 35.5) = 71 gramsWeight of chlorine gas =?At normal temperature and pressure, NTP, the volume of chlorine gas is given as follow:
22.4 L = 1 mole of chlorine gas, Cl₂
22.4 L = 71 grams of chlorine gas, Cl₂
Therefore,
5.6 L = (5.6 L × 71 grams) / 22.4 L
5.6 L = 17.75 grams of chlorine gas, Cl₂
Thus, we can conclude from the above calculation that the weight of the gas at NTP is 17.75 grams
Learn more about weight of gas:
https://brainly.com/question/28724214
#SPJ1
Type your answer here:
Table 1. Measurements Taken from a Simulation of a [insert mass value] kg Ball Released from Various Heights on a Ramp
Mass of ball (kg) Drop height on-ramp (m) Potential energy (J) Time to travel 1.0 m (s) Speed (m/s) Kinetic energy (J)
0.5
1.0
1.5
2.0
2.5
3.0
Conclusions
1. What conclusions can you draw about how the amount of potential energy stored in a system changes as a ball is placed at varying heights on a ramp? Write an evidence-based claim.
Type your answer here:
2. What conclusions can you draw about how the final kinetic energy of a ball in a system changes as a ball is placed at varying heights on a ramp? Write an evidence-based claim.
Type your answer here:
3. Develop a model (diagram) that shows how different amounts of gravitational potential energy (GPE) are stored in the earth-ball system when the ball is raised to different heights on the ramp.
Type your answer here:
4. How did you use what you learned from the first part of the experiment to design a marble run?
Type your answer here:
I used the results from the first part of the experiment to design a marble run by understanding the principles of potential and kinetic energy.
What is kinetic energy?Kinetic energy is the energy of motion. It is the energy an object has due to its motion. When an object is moving, it has kinetic energy. This energy is dependent on the mass of the object and its velocity. Kinetic energy can be calculated by multiplying the mass of the object by the square of its velocity and then dividing the result by two. Kinetic energy is one of the two main types of energy, along with potential energy. It has the ability to cause change within a system, such as breaking chemical bonds. When an object is at rest, it does not have kinetic energy. However, as soon as it begins to move, it acquires kinetic energy. Kinetic energy can be changed or transferred from one object to another, or from one form to another.
To learn more about kinetic energy
https://brainly.com/question/20005035
#SPJ1
How many moles of Argon are present in 11.2 grams of argon gas?
Answer:
0.280 moles
Explanation:
We can convert from grams to moles through molar mass.
Stoichiometry
Stoichiometry is the study of the relationship between quantities of substances. Part of stoichiometry is converting between different quantity measurements such as grams (g) and moles (mols).
One way to convert between g and mols is molar mass. Molar mass is the number of grams in one mole of a substance. Molar mass is a constant that can be found on periodic tables.
Conversion
First, we need to look at a periodic table and find that the molar mass of Argon (Ar) is 39.948 g/mol. To convert between units, set up a multiplication problem where the unwanted units (grams in this case) are in the numerator at one point and then in the denominator. Having the units in opposite positions allows the units to cancel out.
[tex]\frac{11.2g}{1} *\frac{1mol}{39.948g} =0.280mol[/tex]So, there are 0.280 moles of Argon in 11.2 grams. Note that this answer has been rounded according to significant figures rules.
rate law problem need help on
The rate of a reaction is proportional to the some power of the molar concentration of each of the reactants. The order gives us an idea about the kinetics of the reaction.
What is order of a reaction?The order of a reaction is defined as the sum of the powers of the concentration terms of the reactants in the experimentally determined rate equation for the reaction. It is an experimental quantity.
a. The order of the alkene is 1
b. The order of the bromine s 2
c. The overall kinetic order is 3
Since the reaction is third order, the overall rate constant is mol²L⁻²s⁻¹ or M⁻²s⁻¹.
To know more about order of the reaction, visit;
https://brainly.com/question/15909753
#SPJ1
Find the concentration of I in 0.10 M AgNO, saturated with AgI. Include activity coefficients in the solubility-product
expression. The Ksp of AgI is 8.3 x 10-17.
The concentration of I in 0.10 M AgNO, saturated with AgI in the solubility product is 8.3 x 10^-16 M.
Solubility product calculation.The solubility product expression for AgI is:
Ksp = [Ag+][I-]
At equilibrium, the concentration of Ag+ ions is equal to the solubility of AgI, which is equal to the molar solubility of AgI in 0.10 M AgNO3. Let's assume that the molar solubility of AgI is x. Then, the equilibrium concentrations of Ag+ and I- ions are:
[Ag+] = 0.10 M + x
[I-] = x
The solubility product expression can be written as:
Ksp =[tex]\sqrt{x}[/tex] ([Ag+] * [I-])
Substituting the equilibrium concentrations into the solubility product expression, we get:
Ksp = √(0.10 M + x) * (x)
Using the quadratic equation, we can solve for x:
Ksp =√ 8.3 x 10^-17
0.10 M is much greater than x, so we can assume that (0.10 M + x) ≈ 0.10 M
Ksp = (0.10 M) * (x)
x = Ksp / (0.10 M)
x = 8.3 x 10^-16
So, the molar solubility of AgI is 8.3 x 10^-16 M. Since the concentration of I- ions is equal to the solubility of AgI, the concentration of I- ions is also 8.3 x 10^-16 M.
Learn more about solubility product below.
https://brainly.com/question/857770
#SPJ1
What is the water of crystallization for a hydrate composed of 45.1% water? The anhydrous salt has a mass of 178 amu.
The 8 anhydrοus salt has a mass οf 178 amu..
What is mοle?A mοle is the atοm's elementary particle, an iοn. The mοle οf the substance is always related tο the Avοgadrο number. The mοle is always assοciated with the weight οr mass οf the element οr substance. The standard unit οf a mοle is mοl. The mοle is a significant factοr οf the reactant and prοducts tο fοrm an equatiοn. A mοle calculates the atοm, iοn, and substance weighs.
The amοunt οf matter in a bοdy is referred tο as its mass. The kilοgrams is the kilοgrams, which is the SI unit οf mass (kg). Mass is defined as: Mass = Density /Vοlume.
mass οf water =45.1% = 45.1 g
means that 45.1 g οf water in 100 g salt
hence mass οf anhydrοus salt(As)= 100 g - 45.1 g = 54.9 g
mοlar mass οf anhydrοus salt (As) = 178 amu=178 g /mοl
mοlar mass οf water (H2O)=18.015 g /mοl
1st step:- Find mοl οf water
mοl οf water = mass οf water / mοlar mass οf water
= 45.1 g / 18.015 g /mοl
= 2.5035 mοl
2nd step:- find mοl οf Anhydrοus salt
mοl οf Anhydrοus salt (As) = mass οf anhydrοus salt / mοlar mass οf anhydrοus salt
= 54.9 g / 178 g /mοl
= 0.3084 mοl
3rd step:-calculate water οf crysatlisatiοn
= mοl οf water / mοl οf Anhydrοus salt
= 2.5035 mοl / 0.3084
= 8.118
= 8 (apprοx)
hence tοtal 8 mοl οf water present in Anhydrοus salt(As) = As*8H20
Therefοre, 8 anhydrοus salt has a mass οf 178 amu.
Learn more about mole from the given link.
https://brainly.com/question/29367909
#SPJ1
Can someone help explain how to solve this question? A 250 ml flask contains 0.75 miles of O2, 0.13 miles of N2, and enough moles of H2 that produces a partial pressure of 0.74 atm. The temperature of the gas mixture is 297k. Calculate the total pressure of the flask and calculate the mole fraction of H2.
An object that is at rest will begin to move if which of the following is true?
The surface on which it rests is frictionless.
The mass of the object is sufficient.
Gravity on the object can be reduced.
Unbalanced forces act on the object.
Answer:
D. Unbalanced forces act on the object
Explanation:
Newton's First Law of Motion states that an object at rest will remain at rest unless acted on by an outside force.
the object will begin to move when unbalanced forces act on it
Explanation:
Newton's first law of motion states that 'a body or an object will continue to be in its state of rest until it's acted upon by an external force'
2.62 Predict the chemical formulas of the compounds formed by the following pairs of ions: (a) Cr3+ and Br, (b) Fe3+ and O2, (c) Hg22+ and CO2, (d) Ca2+ and CIO3, (e) NH4+ and PO³
The compounds formed are;
1) [tex]CrBr_{3}[/tex]
2) [tex]Fe_{2} O_{3}[/tex]
3) [tex]((Hg)_2}) _{2} (CO_{3}) _{2}[/tex]
4) [tex]Ca(ClO_{3} )_{2}[/tex]
5)[tex](NH_{4}) _{3} PO_{4}[/tex]
How are ionic compounds formed?Ionic compounds are formed through a type of chemical bonding called ionic bonding. Ionic bonding occurs when one or more electrons are transferred from one atom to another, resulting in the formation of ions, which are atoms or molecules that have a net electric charge due to a loss or gain of electrons.
The formation of ionic compounds typically occurs between atoms with large differences in electronegativity, or the ability of an atom to attract electrons.
Learn more about compounds:https://brainly.com/question/13516179
#SPJ1