The balanced chemical equation for the decomposition of potassium chlorate is:
2 KClO3(s) → 2 KCl(s) + 3 O2(g)
According to the equation, 2 moles of KCl are produced for every 2 moles of KClO3 that decompose. The molar mass of KClO3 is 122.55 g/mol, while the molar mass of KCl is 74.55 g/mol. Therefore, we can use the following steps to calculate the amount of KCl produced:
Calculate the number of moles of KClO3:
moles of KClO3 = mass of KClO3 / molar mass of KClO3
moles of KClO3 = 25 g / 122.55 g/mol
moles of KClO3 = 0.2036 mol
Use the mole ratio from the balanced equation to find the number of moles of KCl produced:
moles of KCl = moles of KClO3 x (2 moles of KCl / 2 moles of KClO3)
moles of KCl = 0.2036 mol x (2/2)
moles of KCl = 0.2036 mol
Calculate the mass of KCl produced:
mass of KCl = moles of KCl x molar mass of KCl
mass of KCl = 0.2036 mol x 74.55 g/mol
mass of KCl = 15.18 g
Therefore, 15.18 grams of potassium chloride are produced if 25 grams of potassium chlorate decompose.
The volume of the compartment that holds this reaction inside your car's steerin
column is approximately 0.050L before the airbag inflates.
a. Calculate the pressure in this compartment if it could hold the same number of moles of N 2 from above at a temperature of 45.0°C
b. Convert this pressure in kPa to atm. (Can you use this number in atm's to
describe how many times greater than standard atmospheric pressure this
would be?)
If the compartment could retain the same quantity of moles of N2 gas as determined in the previous question at a temperature of 45.0°C, the pressure inside would be 28.6 atm.
How do you determine the compartment's pressure?P = nRT/V
replacing the specified values:
P = 28.6 atm when P = (0.0122 mol)(0.0821 L atm/mol K)(45.0°C + 273) / 0.050 L.
How is kPa changed into atm?We can use the following conversion factor to change this pressure from kPa to atm:
101.325 kPa per atm
Therefore, the pressure in kPa is 2899 kPa: 28.6 atm x 101.325 kPa/atm
To put it in terms of how much higher than normal atmospheric pressure this would be:
28.6 times (2899 kPa / 101.325 kPa)
As a result, there would be an increase in pressure of 28.6 times inside the container.
To learn more about pressure visit:
brainly.com/question/1890275
#SPJ1
which of the following best describes a metastable state? group of answer choices this state changes the position of the equilibrium but not the rate. the metastable state is created by the prosthetic group of the enzyme. this state is composed of the difference in activation energy of a catalyzed versus an uncatalyzed reaction. the metastable state is a state of the substrate in which the reaction can proceed but typically requires a catalyst. the metastable state is formed by transient complexes with the substrate.
A metastable state is a state of the substrate in which the reaction can proceed but typically requires a catalyst. This statement best describes a metastable state. The correct answer is C.
What is a metastable state?A metastable state is a state of the substrate in which the reaction can proceed but typically requires a catalyst. It is a state of matter that is not in equilibrium but appears to be in equilibrium for a long time, after which it collapses to its most stable state.
Metastability is the quality of a non-equilibrium system to remain in a quasi-stable state for a longer period than predicted by the system's relaxation time.
Here are some characteristics of metastable states: The equilibrium changes in the state but not in the rate. The activation energy difference between a catalyzed and an uncatalyzed reaction makes up the metastable state. The state is made up of transient complexes with the substrate.
To know more about metastable state, refer here:
https://brainly.com/question/14328349#
#SPJ11
The atomic number of an atom is always equal to the total number of
neutrons in the nucleus
neutrons plus protons in the atom
protons in the nucleus
protons plus electrons in the atom
Unlocked badge showing an astronaut’s boot touching down on the moon
See what the community says and unlock a ba
The atomic number of an atom is always equal to the total number of protons in the nucleus. Therefore, the correct answer is "protons in the nucleus".
The atomic number of an atom represents the number of protons present in the nucleus of the atom. Protons are positively charged particles, and they determine the element to which the atom belongs. The number of protons in the nucleus is equal to the number of electrons in the neutral atom, which determines the chemical properties of the element. Neutrons are uncharged particles present in the nucleus, and their number may vary for different isotopes of the same element. Therefore, the atomic number cannot be equal to the total number of neutrons in the nucleus or the total number of protons plus electrons in the atom.
Learn more about protons here: brainly.com/question/1252435
#SPJ4
at the concentration of 20 wt% ag - 80 wt% cu, lf i cool the material down from 1100 c, what is the composition of the first solid phase that forms?\
At 1100 C, the composition of the first solid phase that forms will be closer to the composition of copper than to the composition of silver.
There are a few different steps that need to be taken in order to answer this question properly.
The first step is to identify what the 20 wt% Ag - 80 wt% Cu concentration means. This concentration means that the material is made up of 20% silver and 80% copper by weight.
The second step is to identify the temperature that the material is being cooled from. In this case, the temperature is 1100 C.
The third step is to use phase diagrams to determine what the composition of the first solid phase that forms will be. Phase diagrams are diagrams that show the relationship between temperature, pressure, and the phases of a substance.
In this case, we will be using a binary phase diagram, which shows the relationship between two components. In order to use a phase diagram, we need to know the exact composition of the material that we are working with.
In this case, we know that the material is 20 wt% Ag - 80 wt% Cu. We can use this composition to find the corresponding point on the phase diagram.
Once we have found the point on the phase diagram that corresponds to our material, we can use the diagram to determine the composition of the first solid phase that forms. This composition will depend on the temperature that the material is being cooled from.
At 1100 C, the composition of the first solid phase that forms will be approximately 67% copper and 33% silver. The reason for this composition is that at 1100 C, the material is in the liquid phase.
As the material cools, it will begin to solidify. The first solid phase that forms will be a solid solution of copper and silver. This solid solution will have a composition that is between the composition of pure copper (which is 100% copper) and the composition of pure silver (which is 100% silver).
At 1100 C, the composition of the first solid phase that forms will be closer to the composition of copper than to the composition of silver. This is because copper has a lower melting point than silver, so it will solidify first. As the temperature continues to decrease, the composition of the solid phase will shift towards the composition of silver.
for more such questions on composition.
https://brainly.com/question/9477180
#SPJ11
Someone please help me with this problem:
For the following reaction indicate the oxidation state of each atom in the reactants as well as the oxidation state of each atom in the products. Indicate which atom is being reduced and which is being oxidized. Also, indicate the oxidizing agent and the reducing agent.
2Al (s) + 6HNO3 (aq) -> 2Al(NO3)3 + 3H2
Heart cells require a certain balance of sodium and potassium ions to function. The blood, which is approximately 83% water, carries these two types of ions to the heart. The property of water that allows it to carry ions to the heart is its--
molecular mass
specific heat
polarity
density
The polarity of water is a critical property that enables it to dissolve and transport ions, such as sodium and potassium, to the heart cells, which are essential for proper cardiac function.
The property of water that allows it to carry ions to the heart is its polarity. Water is a polar molecule, which means it has a partial negative charge near the oxygen atom and a partial positive charge near the hydrogen atoms. This polarity allows water molecules to interact with and dissolve ionic compounds, such as sodium and potassium ions, which are crucial for the proper functioning of heart cells. In the bloodstream, sodium and potassium ions are transported by the water molecules.
To know more about cardiac function, here
brainly.com/question/6598720
#SPJ4
the gas law for an ideal gas at absolute temperature (in kelvins), pressure (in atmospheres), and volume is , where is the number of moles of the gas and is the gas constant. suppose that, at a certain instant, atm and is increasing at a rate of .10 atm/min and l and is decreasing at a rate of .15 l/min. find the rate of change of with respect to time at that instant if moles. round your answer to the nearest thousandth.
Answer:
dT/dt=2.680K/M
Explanation:
In this case we have:
P=8atm
R=0.0821
dP/dt=0.10 atm/min
V=10L
dV/dt=0.15L
n=10 moles
given that PV=nRT
d(PV)/dt=d(nRT)/dt
P(dV/dt)+V(dP/dt)=nRdT/dT
8*0.15+10*0.10=10*0.0821* dT/dt
dT/dt=2.6796589525
dT/dt=2.680K/m
(If it was not right please let me know)
A student mixes 25g of NaCl with 100.g of H₂O at 25°C . What is the percent concentration of the resulting solution?
20.
25
0.20
0.25
20 %
Explanation:
becuz 25 divided by 125 multiplied by 100 is 20
the relationship between pressure and volume of a gas is choose... so that as volume decreases, pressure choose...
The relationship between pressure and volume of a gas is Inverse, so that as volume decreases, pressure increases. The relationship between pressure and volume of a gas is called the Boyle's Law.
According to this law, at a constant temperature and amount of gas, the pressure and volume of a gas are inversely proportional to each other i.e. PV = K where P is the pressure, V is the volume, and K is a constant. So, as the volume of a gas decreases, the pressure increases, and as the volume of a gas increases, the pressure decreases.
This can be explained by the fact that as the volume decreases, the molecules of gas are compressed into a smaller space, which causes them to collide more frequently with each other and the walls of the container. This increase in collisions results in an increase in pressure. Conversely, as the volume increases, the molecules of gas have more space to move around and collide less frequently, resulting in a decrease in pressure.
More on Boyle's Law: https://brainly.com/question/2273952
#SPJ11
which group highlights metalloids in the illustration of the periodic table? responses a a b b c c d
The group highlights the metalloids in the illustration of the periodic table is C.
The C are the metalloids or the semi-metals this means they have the some properties that is similar to the metals and the non-metals. The Metalloids can be defined as the chemical elements whose the physical and the chemical properties fall in the between the metal and the non-metal categories.
The Boron, the germanium, silicon, the antimony, arsenic, the tellurium and the pollanium are the seven that is most widely recognized metalloids. Therefore, the metalloids are highlighted by the group C that is present in the periodic table.
To learn more about periodic table here
https://brainly.com/question/17061774
#SPJ4
all bond types in a carboxylic acid have significant polarity, except ______.
All bond types in a carboxylic acid have critical extremity, with the exception of the connection between the two carbon iotas in the carboxyl group.
A carboxyl group is a user group that comprises a carbonyl group (C=O) and a hydroxyl group (- Goodness) joined to a similar carbon molecule, which is likewise clung to a third iota or group.
The carbonyl group in the carboxyl group has a critical extremity because of the electronegativity distinction between the oxygen and carbon iotas. The oxygen iota is more electronegative than the carbon particle, and that implies that it draws in the common electrons in the bond all the more firmly, making a halfway regrettable charge on the oxygen and a fractional positive charge on the carbon.
The hydroxyl group in the carboxyl group likewise has a critical extremity, with the oxygen iota being more electronegative than the hydrogen particle, bringing about a fractional negative charge on the oxygen and a halfway certain charge on the hydrogen.
to know more about the carboxyl group click here:
https://brainly.com/question/3362938
#SPJ4
in the warm-up activity, you observed how the reaction inside the chamber affected the temperature of the surrounding water. based on what happens to the surrounding water, do you think heat energy (enthalpy) is absorbed in the reaction or released? explain.
Based on the observation in the warm-up activity, where the temperature of the surrounding water increased during the reaction inside the chamber, it can be inferred that the reaction released heat energy (enthalpy).
This is because the temperature of the surrounding water increased, indicating that energy was transferred from the system (reaction inside the chamber) to the surroundings (water).
According to the first law of thermodynamics, the total energy of a closed system is conserved, meaning that energy cannot be created or destroyed but can only be transferred between the system and the surroundings. In exothermic reactions, energy is released by the system to the surroundings, resulting in an increase in the temperature of the surroundings.
Therefore, the observation of an increase in temperature of the surrounding water suggests that the reaction inside the chamber is exothermic and releases heat energy.
To learn more about enthalphy refer to:
brainly.com/question/30055078
#SPJ4
The amount of energy needed to heat 6.1 g of a substance from 50.0°C to 80.0°C is 36.6 J. What is the specific heat capacity of this sample?
As a result, the material has a specific heat capacity of 0.20 J/g°C.
How do you define simple specific heat capacity?Its specific heat capacity is the amount of heat energy required to raise the temperature of a unit mass of any substance or matter by one degree Celsius.
We can use the following formula to find the substance's specific heat capacity: Q = m * c * ΔT
where Q is the extra energy in joules, m is the substance's mass in grammes, c is its specific heat capacity in joules per gramme of temperature, and T is the temperature change in degrees Celsius.
When we substitute the specified values, we obtain:
36.6 J = (6.1 g) * c * (80.0°C - 50.0°C)
Simplifying and solving for c, we get:
c = 36.6 J / (6.1 g * 30.0°C)
c = 0.20 J/g°C
To know more about temperature visit:-
https://brainly.com/question/29072206
#SPJ1
which gases cause respiratory illness when exposed to over the long run?(select all that apply) group of answer choices nitrogen oxides carbon dioxide sulfur dioxide carbon monoxide
Option ,1,3 and 4 are correct.
Nitrogen oxides, sulfur dioxide, and carbon monoxide are the gases that cause respiratory illness when exposed over the long run.
These gases/oxides are harmful because of the following reasons-
An oxide is a chemical compound that contains at least one oxygen atom and one other element.It can be either inorganic or organic. Oxides are compounds with a wide range of physical and chemical properties.
Respiratory illness is a broad term used to describe a variety of respiratory system disorders. The respiratory system is made up of the lungs, airways, and muscles that enable you to breathe.Respiratory disorders can be caused by a variety of factors, including genetic, environmental, and lifestyle factors. Asthma, chronic obstructive pulmonary disease (COPD), bronchitis, and emphysema are some examples of respiratory disorders caused by exposure to environmental pollutants.
Carbon dioxide-Carbon dioxide is a colorless, odorless gas that is a byproduct of respiration. Carbon dioxide is a greenhouse gas that contributes to global warming when released into the atmosphere. However, it is not considered to be harmful to human health when exposed in low concentrations.
Sulfur dioxide-Sulfur dioxide is a colorless gas that is produced by the burning of fossil fuels. Sulfur dioxide is a hazardous air pollutant that causes respiratory illnesses such as asthma and bronchitis
Nitrogen oxides-Nitrogen oxides are produced by combustion processes such as the burning of fossil fuels. Nitrogen oxides can cause respiratory illnesses such as asthma and chronic obstructive pulmonary disease (COPD). When nitrogen oxides combine with water vapor, they form acid rain.
Carbon monoxide-Carbon monoxide is a colorless, odorless gas that is produced by the incomplete combustion of fossil fuels. Carbon monoxide poisoning can cause headaches, nausea, dizziness, and even death when exposed in high concentrations. Carbon monoxide is also a contributor to air pollution.
To learn more about nitric oxides and rain: https://brainly.com/question/31206425
#SPJ11
the cage size of the zeolites is in centimeters scaleTrue False
The cage size of the zeolites is in angstroms scale. The size of the cage of zeolites ranges from 2-10 angstroms and that is too small to be measured in centimeters. So, the statement given is false.
Zeolites are defined as the minerals which contain mainly aluminum and silicon compounds. These are used as drying agents in detergents and in water and air purifiers. The zeolites have a cage size which is much more smaller than a nanometer which makes them selective towards certain molecules based on their size and shape.
The properties of zeolites are attributed to their pore structure of the cage. Zeolite is composed of channels and cages which provides a surface area that is accessible to molecules that can be adsorbed.
Zeolite have high surface area of which makes them an effective catalyst for a wide range of reactions which includes the conversion of petroleum feedstocks to gasoline and diesel fuel.
To learn more about Zeolites
https://brainly.com/question/31115840
#SPJ4
When taking a measurement with a pH meter, keep the instrument in the _______1_________ until it is needed. Rinse the pH meter with _______2_______ and gently pat dry. Place the meter in the sample solution, and record the measurement when the pH _________3_________.
an element with 5 protons, 6 neutrons, and 8 electrons has an mass number of ______.
a. 5
b. 6
c. 8
d. 11
Answer:
11
Explanation:
mass no.= No. of protons+ no.of neutrons
= 5+6
=11
The volume of the compartment that holds this reaction inside your car's steering
column is approximately 0.050L before the airbag inflates.
a. Calculate the pressure in this compartment if it could hold the same number of moles of N 2 from above at a temperature of 45.0°C
b. Convert this pressure in kPa to atm. (Can you use this number in atm's to describe how many times greater than standard atmospheric pressure this
would be?)
a. The pressure in the compartment would be 6.7 atm at 45.0°C. b. Converting 6.7 atm to kPa gives 680.6 kPa. This is about 6.7 times greater than standard atmospheric pressure.
What is the volume of the compartment in m³?Converting 0.050 L to m³ gives 5.0 x 10^-5 m³.
If the temperature in the compartment was lowered to 20.0°C while the number of moles of N2 remained the same, what would be the new pressure in the compartment?Using the ideal gas law, we can calculate the new pressure to be 4.4 atm.
We can use the Ideal Gas Law to solve this problem, which states:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.
a) We are given the volume V = 0.050 L, the temperature T = 45.0°C = 318.15 K, and the assumption that the compartment holds the same number of moles of N2 as in the previous question, which is n = 0.036 mol. We can rearrange the Ideal Gas Law to solve for P:
P = nRT/V
P = (0.036 mol)(0.0821 L·atm/mol·K)(318.15 K)/(0.050 L)
P = 146.7 atm
b) To convert this pressure to kPa, we can use the conversion factor 1 atm = 101.3 kPa:
P = 146.7 atm x 101.3 kPa/atm
P = 14862 kPa
To describe how many times greater than standard atmospheric pressure this would be, we can divide this pressure by standard atmospheric pressure, which is approximately 101.3 kPa:
14862 kPa / 101.3 kPa = 146.5
Learn more about pressure here:
https://brainly.com/question/12971272
#SPJ1
Evolution and natural selection are necessary for
Responses
A successful reproduction of a species with other members of that species.successful reproduction of a species with other members of that species.
B the short-term survival of individual organisms.the short-term survival of individual organisms.
C the long-term survival of an entire species of organisms.the long-term survival of an entire species of organisms.
D the preservation of natural habitats.
Answer: "C the long-term survival of an entire species of organisms."
Explanation:
A - Yes, reproduction of the species is part of Evolution, it is not the best answer for the question taking into account the other possible answers.
B - Evolution is not necessarily a short-term thing, Evolution occurs over a long period of time.
C - *Refer to the explanation above.*
D - This answer has more to do with Ecosystems, rather than Evolution/Natural Selection.
one thousand grams of water (about 1 l) contains 55.5 moles of water molecules. (one mole is 6.022 x 1023 particles). one electron is removed from every hundredth water molecule and placed in a container 100. m from the water. a. how many water molecules are there in the water container?
The number of water molecules in the container when one electron is removed from every hundredth water molecule and placed in a container is 100. m from the water is 3.30 x 1025.
Given,1 liter of water = 1000 g of water1 mole of water molecules = 6.022 x 1023 particles.
Therefore, 55.5 moles of water molecules = 55.5 x 6.022 x 1023 particles = 3.33 x 1025 particles one electron is removed from every hundredth water molecule.
So, 1 electron is removed from 1% of water molecules. Therefore, the number of water molecules from which the electron is removed = (1/100) x 3.33 x 1025 = 3.33 x 1023 molecules.
Now, this electron is placed 100 m away from the water container. The distance between the water container and the electron is not relevant for finding the number of water molecules in the container, hence can be ignored.
So, the number of water molecules in the container = Total number of water molecules - number of water molecules from which electron is removed= 3.33 x 1025 - 3.33 x 1023 = 3.30 x 1025.
Learn more about water molecules here.https://brainly.com/question/31200627
#SPJ11
Moles of Zn(NO 3 ) 2 in 173. 50 g of this substances
There are 0.916 moles of Zn(NO₃)₂ in 173.50 g of the substance.
To calculate the moles of Zn(NO₃)₂ in 173.50 g of the substance, we need to know the molar mass of Zn(NO₃)₂.
The molar mass of Zn(NO3)2 can be calculated by adding the atomic masses of zinc (Zn), nitrogen (N), and oxygen (O), and then multiplying by the number of atoms of each element in the compound:
Molar mass of Zn(NO₃)₂ = (65.38 g/mol for Zn) + (2 x 14.01 g/mol for N) + (6 x 16.00 g/mol for O)
Molar mass of Zn(NO₃)₂ = 189.39 g/mol
Now we can use the following formula to calculate the moles of Zn(NO₃)₂:
moles = mass / molar mass
moles = 173.50 g / 189.39 g/mol
moles = 0.916 moles
To know more about moles here
https://brainly.com/question/26416088
#SPJ4
--The given question is incomplete, the complete question is
"Moles of Zn(NO₃)₂ in 173. 50 g of this substances. Express your answer in moles to four significant figures."--
6. 112 mol
007 10. 0 points
A weather balloon with a volume of 2. 29932 L is released from Earth’s surface at sea level. What volume will the balloon occupy at an
The volume of the balloon at the new pressure and temperature will be approximately 0.721 L.
This is a problem involving the ideal gas law, which relates the pressure, volume, number of moles, and temperature of a gas:
PV = nRT
where P is pressure, V is volume, n is number of moles, R is ideal gas constant, and T is temperature in Kelvin.
We can use this equation to solve for the final volume of the balloon at a different pressure and temperature, assuming that the number of moles of gas remains constant.
Firstly, we need to convert temperature to Kelvin:
T₁ = 273.15 + 15 = 288.15 K
T₂ = 273.15 - 50 = 223.15 K
Next, we can rearrange the ideal gas law equation to solve for the final volume:
V₂ = (nRT₂)/P₂
where P₂ is the new pressure.
To find the new pressure, we can use the ideal gas law equation with the given conditions:
P₁V₁ = nRT₁
Solving for P₁:
P₁ = (nRT₁) / V₁
P₁ = (6.112 mol)(0.0821 L·atm/mol·K)(288.15 K) / (2.29932 L)
P₁ = 16.2 atm
Now we can use the new pressure and temperature to calculate the final volume:
V₂ = (nRT₂)/P₂
V₂ = (6.112 mol)(0.0821 L·atm/mol·K)(223.15 K) / (16.2 atm)
V₂ = 0.721 L
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
Is mixing salt and pepper physical change or chemical change ?
Answer:Cutting, tearing, shattering, grinding, and mixing are further types of physical changes because they change the form but not the composition of a material. For example, mixing salt and pepper creates a new substance without changing the chemical makeup of either component.
Explanation:
Can someone help me figure this out?
The limiting reactant of the reaction as shown is AgNO3 because it has less theoretical yield.
How do you know the limiting reactant?The limiting reactant in a chemical reaction is the reactant that gets consumed completely and limits the amount of product that can be formed.
Compare the calculated number of moles of product that can be formed from each reactant. The reactant that produces the smaller number of moles of product is the limiting reactant.
It is important to identify the limiting reactant because it determines the maximum amount of product that can be formed in the reaction.
Learn more about limiting reactant:https://brainly.com/question/14225536
#SPJ1
The combustion of propane gas produces carbon dioxide and water vapor.
C3H8(g)+5O2(g)→3CO2(g)+4H2O(g)
What volume of oxygen is required to completely combust 0.650 L of propane? What volume of carbon dioxide is produced in the reaction?
n(C3H8) = V(P) x (P/T) x (1/mol.mass C3H8)
where V(P) is the volume of propane gas at pressure P and temperature T, and mol.mass C3H8 is the molar mass of propane (44.1 g/mol)
n(C3H8) = 0.650 L x (1 atm/1.01325 bar) x (1/273.15+25) K x (1/44.1 g/mol)
n(C3H8) = 0.0153 mol
Therefore, the amount of oxygen required for complete combustion of propane is:
n(O2) = 5 x n(C3H8)
n(O2) = 5 x 0.0153 mol
n(O2) = 0.0765 mol
To find the volume of oxygen required, we can use the ideal gas law:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature of the gas in Kelvin.
Rearranging the equation and plugging in the values, we get:
V(O2) = n(O2)RT/P
where R is the gas constant (0.08206 L atm mol^-1 K^-1) and T is the temperature in Kelvin (298 K)
V(O2) = 0.0765 mol x 0.08206 L atm mol^-1 K^-1 x 298 K / 1 atm
V(O2) = 1.86 L
Therefore, 1.86 L of oxygen is required to completely combust 0.650 L of propane.
To find the volume of carbon dioxide produced, we use the same approach:
n(CO2) = 3 x n(C3H8)
n(CO2) = 3 x 0.0153 mol
n(CO2) = 0.0459 mol
V(CO2) = n(CO2)RT/P
where R is the gas constant (0.08206 L atm mol^-1 K^-1) and T is the temperature in Kelvin (298 K)
V(CO2) = 0.0459 mol x 0.08206 L atm mol^-1 K^-1 x 298 K / 1 atm
V(CO2) = 1.08 L
Therefore, 1.08 L of carbon dioxide is produced in the reaction.
Please mark this answer as brainliest if possible.
The kinetic energy distributions of particles of a gas at 20 °C and at 60 °C is shown below.
Which one of the statements relating to these distributions is correct?
(a) At 20 °C the average kinetic energy of the particles is higher than at 60 °C.
(b) At 20 °C there are no particles with a high kinetic energy.
(c) At 60 °C there are no particles with a low kinetic energy.
(d) At 60 °C there are more particles with higher kinetic energy than at 20 °C.
Answer:
(a) At 20 °C the average kinetic energy of the particles is higher than at 60 °C.
Hope it helps!
Pls mark brainliest!
what would happen to the percent recovery results if you incorrectly measured your starting mass too high
If you incorrectly measured your starting mass too high, the percent recovery results would be lower than they should be. This is because percent recovery is calculated as the ratio of the actual yield to the theoretical yield, multiplied by 100%.
The actual yield is the amount of product that you actually obtained from the reaction, while the theoretical yield is the amount of product that you would expect to obtain based on stoichiometric calculations.
If you measured your starting mass too high, you would have used more reactant than you should have, resulting in a larger amount of product than you would have obtained if you had used the correct amount of reactant. This means that your actual yield would be higher than it should be, while your theoretical yield would remain the same.
As a result, the ratio of actual to theoretical yield would be lower than it should be, and your percent recovery results would be underestimated.
To learn more about stoichiometric refer to:
brainly.com/question/27287858
#SPJ4
What are two specific pollutants in stormwater runoff?
The two specific pollutants in the stormwater runoff are pathogens and the bacteria.
The common types of the pollutants found in the stormwater runoff will include the sediment, nutrients, the pathogens and the bacteria, heavy metals like the copper, zinc, and the lead, trash and the debris, organic matter, and the microorganisms.
As the storm water flows across streets, sidewalks, lawns and golf courses, it can pick up harmful pollutants and push them into storm drains, rivers and streams. The Stormwater runoff is generated from the rain and the snowmelt that will flows over the land or the impervious surfaces, such as the paved streets, parking lots, and the building rooftops, and it does not soak in the ground.
To learn more about stormwater here
https://brainly.com/question/2279247
#SPJ4
Identify the neutralization reaction. O2H 3PO 4 + 3Ba(OH) 2 6H 20+ Ba(PO 4) 2 O2 NO 2 202 + N 2 PO 4 2NH3 + H2SO 4 → (NH 4) 2SO4 O 3Pb + 2H 3PO4 → 3H 2 + Pb 3(PO 4) 2
The neutralization reaction is:
O2H 3PO4 + 3Ba(OH) 2 → 6H 2O+ Ba(PO 4)2
What is neutralization reaction?A neutralization reaction is a type of chemical reaction that occurs between an acid and a base, resulting in the formation of a salt and water.
In this reaction, the hydrogen ions (H+) from the acid react with the hydroxide ions (OH-) from the base to form water (H2O), which neutralizes the acidic and basic properties of the reactants. The remaining ions then combine to form a salt.
The general equation for a neutralization reaction is:
Acid + Base → Salt + Water
For this question, the chosen answer is the neutralization reaction because an acid (H3PO4) and a base (Ba(OH)2) react to form water and a salt (Ba(PO4)2).
Learn more about neutralization reaction here: https://brainly.com/question/23008798
#SPJ1
QuestionAssertionAtomic size decreases across period but increases down a group of the periodic table.ReasonMoving from left to right across a period, electrons are added one at a time to the outer energy shell. Electrons within a shell cannot shield each other from the attraction to protons, while moving down a group in the periodic table, the number of electrons and filled electron shells increases.ABoth Assertion and Reason are correct and Reason is the correct explanation for AssertionBBoth Assertion and Reason are correct but Reason is not the correct explanation for AssertionCAssertion is correct but Reason is incorrectDBoth Assertion and Reason are incorrectMedium
The correct option is A) Both Assertion and Reason are correct and Reason is the correct explanation for Assertion.
The assertion is that atomic size decreases across a period and increases down a group of the periodic table.
The assertion is correct because, moving from left to right across a period, the atomic number of elements increases, resulting in an increase in the number of protons in the nucleus, which attract the electrons closer to the nucleus, reducing the atomic size. Additionally, as electrons are added to the same valence shell, there is no significant increase in the shielding effect of inner shells, which further decreases the atomic size.
The reason is also correct because, as we move down a group, the number of electron shells increases, and the atomic size increases because of the increasing distance between the outermost electrons and the nucleus. The electrons in inner shells also provide more shielding, reducing the effective attraction of the nucleus on the outermost electrons, further increasing the atomic size.
For more question on atomic size click on
https://brainly.com/question/13404608
#SPJ11