How many atoms are in 10g of Al

Answer:

When an atom or group of atoms in a molecule is replaced by another atom or group of atoms, such chemical reaction is called displacement reaction. Displacement reaction is of two types. They are:

When an atom in a molecule is replaced by another atom, such chemical reaction is called single displacement reaction.

For example:

Zinc + Hydrochloric acid → Zinc Chloride + Hydrogen

Zn + 2HCI → ZnCI₂ + H₂

Here, Zn is more reactive than H₂. So, Zn displaces H from the compound HCI.

A chemical reaction in which the molecules of the reactants get decomposed and exchange their corresponding ions to give new products is called a double displacement reaction.

For example:

AgNO₃ + NaCI → NaNO₃ + AgCI

Hope this helps..

Best regards!!

Answer:

The correct answer is - the second law of thermodynamics.

Explanation:

The second law of thermodynamics says that the in all heat energy exchange or transfer, and if there is no gain or lose of energy in a system, the potential energy of the particular state in that system will less than that of initial state of the system in any case.

It also suggests that the processes deals with the conversion of the heat energy are irreversible and the energy can be transfer from lower temperature system to higher temperate system without adding energy.

Thus, The fact that a heat pump requires energy to move heat from a colder object to a hotter object is a real life example of the second law of thermodynamics.

Answer:

2Ag(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(aq)

Explanation:

The final equation is

2Ag(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(aq)

2Ag(+1)NO3(-1)(aq) + Na2(+1)S(-2)(aq) --> Ag2(+1)S(-2)(s) + 2Na(+1)NO3(-1)(aq)

AgNO3, Na2S, and NaNO3 are all strong electrolytes, so we immediately separate those, making the new equation:

2Ag(+1)(aq) + 2NO3(-1)(aq) + 2Na(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(s) + 2Na(+1)(aq) + 2NO3(-1)(aq)

After that, you cancel out all the ions that appear more than once, which in this case would leave us with a final equation of...

2Ag(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(aq)

Answer:

Explanation:

C

Answer:

Explanation:0.493 M NaOH means 0.493 mol NaOH/L

mols

mols = ------ x L

L

mols = M x V

In a titration procedure, 40.57 mL of 0.493 M NaOH solution was used. How many mols NaOH did this volume of NaOH solution contain?

mols = M x V

0.493 mols NaOH

mols = ----------------------- x 0.04057 L

L

mols = 0.0200 mols NaOH

Answer:

Ankara is the capital of Turkey! Hope this helped you out! :)

Explanation:

The capital of Turkey is Ankara

hopefully this helped :3

Answer:

Depends from where the light is

Explanation:

If it is in the north pole than it will be 0°C

Answer:

You cannot freeze light.

Explanation:

Only some scientists have been able to freeze light. But, they have only been able to freeze light for about 1 minute.

The correct answer is A. It is uniform in composition and the parts that make up the mixture can be separated from one another through physical means.

Explanation:

In a homogeneous mixture, components are completely integrated, which means the final substance is uniform and the parts that compose it are not separated. This occurs in milk because this integrates uniformly water, fat, among others, and these elements cannot be observed separately.

Moreover, in mixtures, components can be separated through physical means; for example by heating the substances. This applies to milk because if it is heated water evaporates, and therefore can be separated.

The two terms apply to oceanic crust rather than continental crust C. Denser and D. Younger in age

Oceanic Crust Oceanic crust, extending 5-10 kilometers (3-6 kilometers) beneath the ocean floor, is mostly composed of different types of basalts. Geologists often refer to the rocks of the oceanic crust as “sima.” Sima stands for silicate and magnesium, the most abundant minerals in oceanic crust.

Oceanic crust is thin (6 km thick) and dense (about 3.3 g/cm), consisting of basalt, gabbro, and peridotite. They include oceanic sediments (e.g. radiolarites, turbidites) and oceanic crust (e.g. basalt, pillow lava).

Learn more about Oceanic crust here https://brainly.com/question/26053779

#SPJ2

Answer:

when the coal is heat with presence of oxygen it's called combustion...

Answer:

carbohydrates are energy giving foods that warm the body and could be in different forms

Answer and Explanation:

Carbohydrates are a type of biomolecule that the body uses primarily for energy and/or structure. They usually consist of the elements carbon (C), hydrogen (H), and oxygen (O) in a 1 : 2 : 1 ratio. For example, glucose, a carbohydrate, is [tex]C_6H_{12}O_6[/tex].

Monomers of carbohydrates are called monosaccharides, and polymers are called disaccharides if two monosaccharides are combined and polysaccharides if more than two monosaccharides are put together.

Examples of carbohydrates are sugars, starches, cellulose, lactose, sucrose, etc.

Answer:

We don't know what solvent X and solvent Y are, but from the chart, we can see that in solvent X, hydrochloric acid can conduct electricity (bulb lights up), and react with calcium carbonate.

So, we can say the electrical conductivity when HCl is dissolved in solvent X is high, and when HCl is dissolved in solvent Y, the electrical conductivity is low (because light bulb doesn't light up).

Additionally, in solvent X, HCl ionizes, this shows the property of acids: reacts with carbonates to give CO2 (because CO2 reacts with lime water to make it cloudy).

In solvent Y, HCl does not ionize, so there is no reaction between acid and calcium carbonate.

Answer:

Option A is the correct option.

Explanation:

[tex] \frac{p1 \: v1}{t1} = \frac{p2 \: v2}{t2} [/tex]

[tex]p2 = \frac{p1 \: v1 \: t2}{t1 \: v2} [/tex]

[tex]p2 = \frac{2.45 \times 8 \times 550}{273 \times 11.8} [/tex]

[tex]p2 = 3.35 \: atm[/tex]

Partial pressure of N² :

[tex]3.35 \times \frac{78.08}{100} [/tex]

[tex] = 2.61 \: atm[/tex]

Hope this helps..

Best regards!!

Answer:  2.61 atm

Option A is the correct option.

....

...

..

.

Polar molecules interact strongly  with other polar molecules but do not interact with nonpolar molecules, and vice versa ,therefore option (a) and option (c) are correct .

A polar molecule is a chemical substance in which the distribution of electrons between the atoms involved is uneven, resulting in a dipole moment.

When a molecule or atom is said to have a polar bond, then the center of the negative charge will be on one side, whereas the center of positive charge will be on the other side. The complete molecule will be a polar molecule.

Polar molecules interact strongly  with other polar molecules but do not interact with nonpolar molecules, and vice versa ,hence option (a) and option (c) are correct .

Learn more about polar molecules, here:

https://brainly.com/question/11405437

#SPJ2

Answer:

Na3 Po4

Explanation:

Na+1

Na+1

Na+1 = Na3

Po4 =

Na3Po4

Na[tex]_3[/tex]Po[tex]_4[/tex] is the formula for sodium phosphate. Sodium phosphates have a wide range of uses in food and water treatment.

Sodium phosphate is indeed a catch-all phrase for a number of sodium (Na+) as well as phosphate (PO43) salts. Phosphate also forms di-, tri-, tetra-, as well as polyphosphate families or condensed anions. The majority of these salts exist across both anhydrous (water-free) as well as hydrated forms. Hydrates are more prevalent than anhydrous forms.

Sodium phosphates have a wide range of uses in food and water treatment. Sodium phosphates, for example, are frequently employed particularly emulsifying agent (as in processed cheese), smoothing agents, especially leavening agents in baked products. Na[tex]_3[/tex]Po[tex]_4[/tex] is the formula for sodium phosphate.

Therefore, Na[tex]_3[/tex]Po[tex]_4[/tex] is the formula for sodium phosphate.

To know more about sodium phosphate, here:

https://brainly.com/question/10559079

#SPJ5

Explanation:

pH is used to measure the concentration of H+ ions ([H+]) and therefore, whether a substance is acidic or basic (alkaline). Solutions with a pH of less than seven are acidic, while those with a pH greater than seven are basic (alkaline).

Answer:

greater than 7

Explanation:

A base is any solution with a pH greater than 7. A pH of 7 is considered neutral. For example, the pH of water. An acid is any solution with a pH less than 7.

Hope that helps.

Explanation:

ascorbic acid is lemon

lemon contain ascorbic acid....

it is organic acid.....

Answer:

The given hydrocarbon is Glycerol

Answer:

B. choosing a material that will show warning before it fails.

Explanation:

Answer:

APEX

Explanation:

B

Answer:

2.22 x  10²³

Explanation:

first we have to find number of moles

mol = 10/27

mol= 0.37 mol

Now,

number of atoms = mole x 6 x 10²³

                             = 0.37 x 6 x 10²³

                            = 2.22 x  10²³

Explanation:

(a):their malleability:

>iron making. iron worker heat the meat and hammer it to give them the desired shape.

> in the jewelry making process, like the gold or silver you wear are results due to the malleability of metal

(b):their ductility:

>for the making of high tension cable that connects different cities for transferring of electricity.

>for making wire gauze

(c):their ability to conduct electricity:

>for lighting up your house with light bulbs

>for using cooking stoves

>to make refrigerator work.

Answer:

a)gold and silver-used to make jewellery

b)gold and copper(we draw them in wires easily because they are not brittle)

c)copper and iron(this is because both of them are metal and metaps are best conductors of electricity)

Explanation:

uses of copper- to make utensils

to make wires for circuits

uses of silver-to make jewellery

to make mirrors

malleability is the property of a meta in which the metal can be changed into different shapes.

Ductility-can be drawn into thin wires.

Answer:

partly ionic and partly covalent

Answer:

 pH

 7.0 = neutral.

(7–14) =  basic

(0–6) =  acidic

Explanation:

Answer:

pH and pOH denote the negative log of the concentration of hydrogen or hydroxide ions. High pH means that a solution is basic while high pOH means that a solution is acidic. ... So here the basic definition of pH is that it's equal to negative log base 10 of the concentration of protons in your solution.

pH and pOH are inversely proportional to one another i.e. as one increases, the other decreases and vice versa.

pH and pOH are terms used to measure the level of acidity or alkalinity of a substance.

A basic solution has a pOH less than 7, while an acidic solution has a pOH greater than 7.

On the other hand, a basic solution has a pH greater than 7 while an acidic solution has a pH lesser than 7.

Therefore, it can be said that pH and pOH are related inversely i.e. as one decreases, the other increases.

Learn more about pH at: https://brainly.com/question/15289741

#SPJ9

Answer:

The correct option is;

decreasing entropy is a nonspontaneous

Explanation:

Recycling of aluminium beverage cans involves the process of remelting scrapped beverage after the cans were first produced and used initially

1) The cans are cut into pieces so as to make them more compact and accessible for cleaning

2) The cans are then blocked and melted by heating and the impurities and hydrogen gas are removed

3) The composition of the molten aluminium alloy is altered by the addition of the alloy composition to get the right specification of the alloy

4) The molten alloy can then be sent for usage where it will be processed into solid aluminium objects without the requirement for much energy addition

By the second law of thermodynamics, processes 1, and 2 which involve the addition of energy from the surrounding to decrease the randomness of the scrapped beer cans such that the entropy of the surrounding decreases are not spontaneous processes, while process 4 where the molten aluminium will be cooled down to form solid aluminium does not require energy input but adds energy to the surrounding in the surrounding's entropy, is therefore a spontaneous process.

Therefore, decreasing the entropy of the universe by heating aluminium to melt it is a non spontaneous process

Answer:

the original concentration of A = 0.0817092  M

Explanation:

A reaction is considered to be of first order it it strictly obeys the graphical equation method.

[tex]k_1 = \dfrac{2.303}{t}log \dfrac{a}{a-x}[/tex]

where;

k = the specific rate coefficient  = 3.4 × 10⁻⁴ s⁻¹

t = time   = 5.0 h = 5.0 × 3600 = 18000 seconds

a = initial concentration = ???

a - x = remaining concentration of initial concentration at time t = 0.00018 mol L⁻¹

[tex]3.4 \times 10^{-4}= \dfrac{2.303}{18000}log \dfrac{a}{0.00018}[/tex]

[tex]3.4 \times 10^{-4}= 1.27944 \times 10^{-4} \times log \dfrac{a}{0.00018}[/tex]

[tex]\dfrac{3.4 \times 10^{-4}}{1.27944 \times 10^{-4}}= log \dfrac{a}{0.00018}[/tex]

[tex]2.657= log \dfrac{a}{0.00018}[/tex]

[tex]10^{2.657}= \dfrac{a}{0.00018}[/tex]

[tex]453.94 = \dfrac{a}{0.00018}[/tex]

[tex]a =453.94 \times 0.00018[/tex]

a = 0.0817092  M

Thus , the original concentration of A = 0.0817092  M

Answer:

The correct answer is: 1.035 x 10⁻³ M

Explanation:

The dissociation equilibrium for acetic acid (CH₃COOH) is the following:

CH₃COOH(aq) ↔ CH₃COO⁻(aq) + H⁺(aq)  Kc = 1.8 x 10⁻⁵

The expression for the equilibrium constant (Kc) is the ratio of concentrations of products over reactants. The products are acetate ion (CH₃COO⁻) and hydrogen ion (H⁺) while the reactant is acetic acid (CH₃COOH):

[tex]Kc=\frac{[CH_{3} COO^{-} ][H^{+} ]}{[CH_{3} COOH]}= 1.8 x 10^{-5}[/tex]

Given: [CH₃COOH]= 0.016 M and [CH₃COO⁻]= 0.92 M, we replace the concentrations in the equilibrium expression and we calculate [H⁺]:

[tex]\frac{(0.016 M)[H^{+} ]}{(0.92M)}= 1.8 x 10^{-5}[/tex]

⇒[H⁺]= (1.8 x 10⁻⁵)(0.92 M)/(0.016 M)= 1.035 x 10⁻³ M

Answer:

D- Assertion is false and Reason is true

Explanation:

Precipitation is said to have occurred when an insoluble product is formed from soluble ones. Let us take an instance;

BaCl2(aq) + H2SO4(aq) -------> BaSO4(s) + 2HCl(aq)

The barium sulphate so formed is an insoluble product obtained from the reaction of soluble barium chloride and sulphuric acid. This is a typical example of a double replacement reaction as the both ions exchanged partners.

Thus, the assertion is false but the reason is true.

Answer:

Protons and neutrons have almost the same mass and are both located in the nucleus of the atom

Answer:

Protons and neutrons have almost the same mass and are both located in the nucleus of the atom. Protons are charged particles. Neutrons are neutral particles. ... The positive charge of the protons in the nucleus is balanced by the negative charge of the electrons.