how far apart would two 100 kg persons need to be so that the force they exert on each other is equal to 1n? you can assume they are point masses, having mass but no size.

The magnitude of the normal force is 147 N.

The  magnitude of Force Friction is 73.5 N.

The acceleration of the box is  0.21 m/s².

The magnitude of the normal force is calculated as follows;

Fn = mg

where;

Fn = 15 kg x 9.8 m/s²

Fn = 147 N

The  magnitude of Force Friction is calculated as follows;

Ff = μFn

Ff = 0.5 x 147 N

Ff = 73.5 N

The acceleration of the box is calculated as follows;

F - Ff = ma

a = (F - ff)/m

a = (100 x cos40  -  73.5 ) / 15

a = 0.21 m/s²

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

0.45 m far is the spring compressed if 150 N force is used in a spring has a spring constant of 330 N/m

Define spring constant

The stiffness of the spring is quantified by the spring constant, k. For various materials and springs, it varies. The spring becomes stiffer and more challenging to stretch as the spring constant increases.

It is used to assess the stability or instability of a spring and, consequently, the system it is meant to serve. Its expression is given by the formula k = - F/x, which reworks Hooke's Law. where x is the displacement caused by the spring, given in N/m, and k is the spring constant.

Force = spring constant * extension

150 = 330 * extension

Extension  = 150/330

Extension = 0.45 m

To learn more about spring constant use:

https://brainly.com/question/14670501

#SPJ4

Antibiotic resistance is a major problem that has arisen due to the selective pressure exerted on bacterial populations by the overuse and misuse of antibiotics.

It's possible that the woman who contracted salmonellosis had a strain of Salmonella bacteria that was already resistant to ciprofloxacin and ampicillin, or that the bacteria developed resistance to these antibiotics as a result of her treatment.

This emphasizes the significance of prudent antibiotic usage as well as the requirement for the creation of fresh medications and other treatments to fight antibiotic-resistant bacteria.

Learn more about evolution:https://brainly.com/question/19297126

#SPJ1

The purpose of the velocity sector in a common type of mass spectrometer with crossed electric and magnetic fields is to block all ions except those with specific speeds.

In a mass spectrometer, the velocity sector plays a crucial role in separating and analyzing ions based on their mass-to-charge ratios. When a beam of ions passes through the velocity sector, the crossed electric and magnetic fields work together to filter out ions with specific speeds. This selection process ensures that only ions with desired characteristics proceed to the detector, providing a more accurate and precise analysis of the sample. The other functions mentioned, such as decreasing the kinetic energy of the ions, preventing ions from traveling in a circular path, or stripping loose electrons from the ions, are not the primary purpose of the velocity sector in this type of mass spectrometer.

Know more about mass spectrometer click here:

https://brainly.com/question/24160758

#SPJ11

Answer:

One cell can divide into two new cells. This is called mitosis. The process of cell division goes through various stages. First the cell nucleus divides into two. A new cell surface membrane then severs the cell divides. The two new cells are called daughter cells and they are small. They will grow larger. they grow by getting nutrients from the food that is eaten. Once they grow to full size they can also reproduce or divide. If cells divide more quickly than they should, or divide in the wrong way, diseases may develop.

Explanation:

Hope that helped

The fate of the core depends on the mass of the star and the balance between gravity and the pressure created by the nuclear reactions.

When a high-mass star runs out of hydrogen fuel in its core, it starts to undergo significant changes. Initially, the core of the star shrinks and heats up, as the gravitational pull becomes stronger due to the decreased energy output from the nuclear fusion reactions. This increase in temperature and pressure allows for helium fusion to begin, which produces heavier elements such as carbon and oxygen.

The process of helium fusion is much faster than hydrogen fusion, and it causes the core to heat up even more. This can lead to further fusion reactions, creating elements up to iron. The star's outer layers, however, continue to expand and cool, causing it to become a red giant.

Ultimately, the core of a high-mass star will either continue to fuse heavier elements until it can no longer sustain nuclear reactions, leading to a supernova explosion, or it will collapse under its own weight to form a black hole or a neutron star.

To learn more about : mass

https://brainly.com/question/86444

#SPJ11

The force that acts on falling objects to oppose gravity is air resistance, also known as drag.

Air resistance is a type of frictional force that occurs when an object moves through a fluid, such as air or water. As a falling object accelerates due to gravity, it also encounters resistance from the air molecules it pushes against. This resistance increases with the object's speed, making it harder for the object to continue accelerating at the same rate.

Air resistance plays a crucial role in determining the terminal velocity of a falling object. Terminal velocity is the constant speed that an object reaches when the downward force of gravity is exactly balanced by the upward force of air resistance. At this point, the object no longer accelerates and maintains a steady speed until it comes into contact with the ground or another surface.

Various factors affect the air resistance acting on a falling object, including the object's size, shape, and surface area. Objects with larger surface areas and irregular shapes experience more air resistance, slowing their descent compared to smaller, more streamlined objects. In some cases, air resistance can be minimized by designing objects with specific shapes, such as the aerodynamic design of airplanes, cars, and sports equipment.

In summary, air resistance is the force that opposes gravity on falling objects, influencing their terminal velocity and overall motion through the air. This force is affected by factors such as the object's size, shape, and surface area, and plays a critical role in various applications, including engineering and sports.

To know more about drag, refer here:

https://brainly.com/question/12774964#

#SPJ11

The frequency of a light wave with a wavelength of 6.0 × 10^–7 meters traveling through space is 5.0 × 10^14 Hz so that the correct answer is option (A)

To calculate the frequency of a light wave, we can use the formula: frequency (f) = speed of light (c) / wavelength (λ). The speed of light in a vacuum is approximately 3.0 × 10^8 meters per second (m/s).

Given the wavelength of the light wave as 6.0 × 10^–7 meters, we can now determine the frequency.

Step 1: Write down the formula
f = c / λ

Step 2: Substitute the values
f = (3.0 × 10^8 m/s) / (6.0 × 10^–7 m)

Step 3: Calculate the frequency
f = 5.0 × 10^14 Hz

So, the frequency of the light wave is 5.0 × 10^14 Hz, which corresponds to option A.

Know more about frequency of a light wave click here:

https://brainly.com/question/3075536

#SPJ11

The magnitude of the force is 1.8 x 10-16 N. The magnetic force on the electron is 1.2 x 10-14 N.  The magnitude of the force acting on the charge is 0.04 N. The magnetic flux will be 0.

1. The direction of the magnetic force on an electron traveling to the north with a speed of 3.5 x 106 m/s in a magnetic field of strength 0.030 T directed to the left can be determined using the right-hand rule.

When the thumb of the right hand points in the direction of the velocity vector, and the fingers point in the direction of the magnetic field vector, the direction of the magnetic force is perpendicular to both and can be found by the direction of the palm.

In this case, the force will be directed downward, and its magnitude can be calculated using the formula [tex]F = qvBsin\theta[/tex] , where q is the charge of the electron, v is its velocity, B is the magnetic field strength, and θ is the angle between the velocity and magnetic field vectors. The magnitude of the force in this case is 1.8 x 10-16 N.

2. The magnetic force on an electron traveling perpendicular to the Earth's magnetic field can also be calculated using the formula F = qvB. In this case, the force is directed perpendicular to both the velocity and magnetic field vectors and is given by

[tex]F = (1.6 \times 10-19 C) \times (2.0 \times 105\; m/s) \times (5.9 \times 10-5 T)[/tex]

F = 1.2 x 10-14 N.

3. In this problem, a charged particle with charge [tex]q = 4\mu C[/tex] is moving with a velocity of 2 x 103 m/s at an angle of 30o to a uniform magnetic field of strength B = 100 F.

The force on the charged particle can be calculated using the formula [tex]F = qvBsin\theta[/tex], where θ is the angle between the velocity and magnetic field vectors. Substituting the values, we get

[tex]F = (4 \times 10-6 C) \times (2 \times 103\;m/s) \times (100 T) \times sin 30^{\circ}[/tex]

F = 0.04 N.

4. The magnetic flux through a circular loop of area 5 x 10-2m2 rotating about its diameter perpendicular to a uniform magnetic field of strength 0.2 T can be calculated using the formula [tex]\phi = BAcos\theta[/tex], where A is the area of the loop, B is the magnetic field strength, and θ is the angle between the magnetic field vector and the normal to the plane of the loop.

Since the loop is rotating about its diameter perpendicular to the magnetic field, the angle between the two vectors is 90, and the flux is given by [tex]\phi = (0.2 T) \times (5 \times 10-2\; m2) \times cos 90^{\circ} = 0[/tex].

To know more about magnitude refer here:

https://brainly.com/question/30827927#

#SPJ11

The work done on the slinky to stretch it 0.50 meters horizontally across a table is 20 J.

The work done on a spring is given by the equation W = (1/2)[tex]kx^{2}[/tex], where W is the work done, k is the spring constant, and x is the distance stretched. Substituting the given values, we get: W = (1/2)(160 N/m)[tex](0.50m)^{2}[/tex], W = 20 J

Therefore, the work done on the slinky to stretch it 0.50 meters horizontally across a table is 20 J.

The work done is equal to the energy stored in the spring as potential energy due to its deformation.

When the slinky is stretched, the work done on it is stored as potential energy in the spring, which can be converted back to work when the spring is released.

To know more about potential energy, refer here:

https://brainly.com/question/24284560#

#SPJ11

The dart will move at velocity approximately 5.0 m/s when it leaves the gun.

To calculate the speed of the dart, we can use the conservation of energy principle. When the spring is compressed, it has potential energy, which is converted into the kinetic energy of the dart when it is released. The potential energy of the compressed spring can be calculated using the formula: PE = 0.5 * k * x^2, where PE is the potential energy, k is the spring constant (250 N/m), and x is the compression distance (0.05 m).

PE = 0.5 * 250 * (0.05)^2 = 0.3125 J (joules)

Now, we can use the kinetic energy formula to find the speed of the dart: KE = 0.5 * m * v^2, where KE is the kinetic energy, m is the mass of the dart (0.025 kg), and v is the speed. We can rearrange this formula to solve for v:

v = sqrt((2 * KE) / m)

Plugging in the values, we get:

v = sqrt((2 * 0.3125) / 0.025) ≈ 5.0 m/s

Therefore, the speed of the dart when it leaves the gun is approximately 5.0 m/s.

Know more about potential energy of the compressed spring click here:

https://brainly.com/question/14577144

#SPJ11

(a)(i) To calculate the change in wavelength of light received by an observer on the Earth, we can use the formula for redshift:

z = ∆λ/λ = v/c

where z is the redshift, ∆λ is the change in wavelength, λ is the original wavelength, v is the velocity of the galaxy, and c is the speed of light.

Substituting the given values, we get:

z = ∆λ/6.2 × 10−7 m = 3.9 × 104 km/s / 3.0 × 105 km/s

Solving for ∆λ, we get:

∆λ = λz = 6.2 × 10−7 m × 3.9 × 104 km/s / 3.0 × 105 km/s

∆λ = 8.06 × 10−11 m

Therefore, the change in the wavelength of the light received by an observer on Earth is 8.06 × 10−11 m.

(ii) The wavelength of the light that is received by the observer on Earth can be calculated using the formula:

λ' = λ + ∆λ

where λ' is the new wavelength and λ is the original wavelength.

Substituting the given values, we get:

λ' = 6.2 × 10−7 m + 8.06 × 10−11 m

λ' = 6.2008 × 10−7 m

Therefore, the wavelength of the light received by the observer on Earth is 6.2008 × 10−7 m.

(b) The redshift of galaxies supports the Big Bang theory in two ways:

1. According to the Big Bang theory, the universe is expanding. As the universe expands, galaxies move away from each other, and their light is redshifted. The greater the redshift, the faster the galaxy is moving away from us. The observation of redshift in distant galaxies provides evidence that the universe is indeed expanding.

2. The Big Bang theory predicts that the early universe was much denser and hotter than it is now. This high density and temperature would have caused the universe to emit a lot of radiation, including light. As the universe expanded, this radiation would have cooled and stretched, leading to a cosmic microwave background radiation that fills the universe. The observed spectrum of this radiation is consistent with the predictions of the Big Bang theory. The redshift of distant galaxies provides further evidence for the Big Bang theory, as it is consistent with the idea that the universe was much denser and hotter in the past.

The work done by the cable on the car is 67500 J.  

To calculate the work done by the cable on the car, we need to use the formula for work, which is:

W = F * d

here W is the work done, So, F is the force applied, and here d is the displacement of the object being moved.

In this case, the force applied by the cable is given by the tension in the cable, which is 1350 N. The displacement of the car is given by the distance it is pulled along the roadway, which is 5.00 km.

We can use the formula for distance to calculate this displacement, which is:

d = 5.00 km

Substituting this value into the formula for work, we get:

W = 1350 N * 5.00 km

W = 67500 J

Therefore, the work done by the cable on the car is 67500 J.  

Learn more about work Visit: brainly.com/question/25573309

#SPJ4

Here are some reasons why the Moon was chosen for the first manned space missions:

The moon's proximity to Earth and its relatively low gravity made it the best choice for the first manned space missions, as it was a more feasible target to reach and return from compared to other celestial bodies like Mars.

Additionally, the moon's lack of atmosphere and magnetic field meant that it presented fewer technical challenges for spacecraft to land and operate on its surface.

The characteristic of the Moon that made it the best choice for the first manned space missions, such as the Apollo missions, was its relative proximity to Earth. Compared to other celestial bodies in our solar system, the Moon is the closest and most accessible.

1. Proximity: The Moon is located at an average distance of about 384,400 kilometers (238,900 miles) from Earth. This relatively short distance made it feasible for manned missions using the available technology at the time. Sending astronauts to Mars or other distant celestial bodies would have required significantly more time, resources, and technological advancements.

2. Exploration and Preparation: Before attempting manned missions to more distant destinations, such as Mars, it was important to gain experience and knowledge about human space travel. The Moon provided a relatively nearby and manageable target for astronauts to explore, learn about spaceflight operations, and conduct experiments. It served as a stepping stone for future space exploration endeavors.

3. Safety and Communication: The Moon's proximity to Earth allowed for more straightforward communication and a shorter travel duration. In case of emergencies or technical difficulties during the missions, direct communication and potential rescue operations were more feasible compared to missions to more distant locations like Mars.

4. Scientific Value: The Moon also presented scientific value in terms of studying its geology, lunar samples, and the potential for resource utilization. By conducting manned missions to the Moon, scientists and researchers were able to gather valuable data about the Moon's composition, formation, and potential for future exploration and scientific research.

It's important to note that while the Moon was a logical choice for the first manned space missions, the desire to explore and study other celestial bodies, including Mars, remains a significant goal for future space exploration endeavors.

To know more about low gravity refer here

https://brainly.com/question/30104572#

#SPJ11

According to the theory of special relativity, the speed of light is constant in all inertial frames of reference. Therefore, the speed of the pulses of light measured by the spaceship will be the same as the speed of light, c.

However, since the spaceship is moving towards the distant star at 0.90c, the relative speed of the spaceship with respect to the pulses of light will be c - 0.90c = 0.10c. This means that the pulses of light will approach the spaceship at a speed of 0.10c.

To understand this concept more clearly, imagine you are standing still and someone throws a ball towards you at 10 mph. The relative speed of the ball with respect to you is 10 mph. Now, if you start walking towards the ball at 5 mph, the relative speed of the ball with respect to you will be 10 mph - 5 mph = 5 mph. Similarly, in the case of the spaceship, the relative speed of the pulses of light with respect to the spaceship will decrease as the spaceship moves towards the source of the light.

In conclusion, the pulses of light will approach the spaceship at a speed of 0.10c from the spaceship's point of view. This concept is important in understanding the effects of relative motion on the measurement of physical phenomena, and it has implications for our understanding of the nature of space and time.

To know more about special relativity refer here

https://brainly.com/question/12717449#

#SPJ11

To answer your question about the distance traveled by light from the left slit compared to the right slit, we can use the formula for constructive interference in a double-slit experiment.

The formula for the path difference is given by:

ΔL = m * λ

where ΔL is the path difference (the extra distance traveled by light from the left slit compared to the right slit), m is the order of the maximum (m=1 in this case), and λ is the wavelength of the light (550 nm).

Now, we can plug in the values:

ΔL = 1 * 550 nm

ΔL = 550 nm

So, the light from the left slit traveled 550 nm farther than the light from the right slit in reaching the m=1 maximum on the right side of the central maximum.

To know more about double-slit experiment refer here

https://brainly.com/question/28108126#

#SPJ11

The weight of an object with a mass of 50 kg on Earth's surface is 490.5 N (Newtons).

To calculate the weight of an object on Earth's surface, we need to consider the mass of the object and the force of gravity (g). In this case, the mass is given as 50 kg, and the force of gravity is assumed to be 9.81 m/s².

Step-by-step explanation:

1. Start with the mass of the object (m) which is given as 50 kg.
2. Next, take the force of gravity (g) as 9.81 m/s² (as provided).
3. Now, we need to use the weight formula, which is:
Weight (W) = mass (m) × force of gravity (g)

4. Substitute the values of mass and force of gravity in the formula:
W = 50 kg × 9.81 m/s²

5. Perform the multiplication:
W = 490.5 N

So, the weight of the object sitting on Earth's surface with a mass of 50 kg is 490.5 Newtons.

Know more about force of gravity click here:

https://brainly.com/question/14874038

#SPJ11

The maximum current across the resistor is 0.01 amps.

The capacitor can hold a maximum charge of 1500 C.

It takes 0.15 seconds for the capacitor to reach.

a) The maximum current that flows through the resistor during charging can be calculated using the formula I = V/R, where V is the voltage of the battery and R is the resistance of the circuit. Therefore, I = 1.5V / 150Ω = 0.01 A.

b) The maximum charge on the capacitor can be calculated using the formula Q = CV, where C is the capacitance of the capacitor and V is the maximum voltage across the capacitor during charging. Therefore, Q = (1000 μF) * (1.5V) = 1500 μC.

c) The time it takes for the capacitor to reach a potential of 1.0V can be calculated using the formula t = RC, where R is the resistance of the circuit and C is the capacitance of the capacitor. Therefore, t = (150Ω) * (1000 μF) = 0.15 s.

To know more about the Capacitor, here

https://brainly.com/question/31064008

#SPJ4

The power dissipated by the bathroom heater is 1.26 kW or 1260 W.

Given data:
1. Current (I) = 10.5 A
2. Potential difference (V) = 120 V

Unknown:
1. Power (P)

Equation used: P = IV

Now, let's solve the problem step-by-step:

Step 1: Recall the formula for power, which is P = IV.

Step 2: Plug in the given values for current (I) and potential difference (V) into the equation.

P = (10.5 A) × (120 V)

Step 3: Perform the multiplication to calculate the power.

P = 1260 W

Step 4: Check the significant digits. Both given values have three significant digits, so our answer should also have three significant digits.

For more about power dissipated:

https://brainly.com/question/12803712

#SPJ11

Two skaters are standing in the middle of an ice skating rink. Skater 1 has a mass of 50kg and Skater 2 has a mass of 45kg. When they push off from one another, Skater 1 has a speed of 2 m/s. The speed of Scater 2 is 2.22 m/s in the opposite direction.

To solve this problem, we need to use the principle of conservation of momentum.

According to this principle, the total momentum of the two skaters before and after the push off must be the same.

Let's assume that Skater 2 moves in the opposite direction to Skater 1 after the push off, with a speed of v. Then, the initial momentum of the two skaters is:

50 kg * 2 m/s - 45 kg * 0 m/s = 100 kg m/s

The final momentum of the two skaters is:

50 kg * 0 m/s - 45 kg * v = -45 kg v

Since the total momentum is conserved, we can equate the two expressions and solve for v:

100 kg m/s = -45 kg v

v = -2.22 m/s

This means that Skater 2 moves away from Skater 1 with a speed of 2.22 m/s. The negative sign indicates that Skater 2 moves in the opposite direction to Skater 1.

For more such questions on speed, click on:

https://brainly.com/question/6504879

#SPJ11

Efficient plumbing encompasses various features, technologies, and practices that contribute to water conservation, cost savings, environmental sustainability, and overall system performance.

Certainly! Here are some additional ways to describe efficient plumbing:

1. Saves water and energy: Efficient plumbing systems are designed to minimize water wastage and reduce energy consumption, leading to cost savings and environmental benefits.

2. Enhances water conservation: Efficient plumbing promotes water conservation by utilizing technologies such as low-flow fixtures, dual-flush toilets, and water-efficient appliances.

3. Reduces water bills: By reducing water consumption, efficient plumbing can lead to lower water bills for homeowners and businesses.

4. Prevents leaks and water damage: Properly installed and maintained efficient plumbing systems help prevent leaks and water damage, preserving the integrity of the building and reducing the risk of costly repairs.

5. Improves overall system performance: Efficient plumbing systems are designed to optimize water distribution and drainage, ensuring reliable and consistent performance throughout the building.

6. Supports sustainable practices: Efficient plumbing aligns with sustainable practices by reducing water usage and minimizing the environmental impact associated with water supply and wastewater treatment.

7. Enhances occupant comfort and convenience: Efficient plumbing provides reliable and consistent water supply, temperature control, and proper drainage, enhancing the comfort and convenience of occupants.

8. Meets regulatory requirements: Many building codes and regulations require the installation of efficient plumbing systems to meet water efficiency standards and promote sustainable practices.

To know more about energy refer here

https://brainly.com/question/1932868#

#SPJ11

For a company looking to build a bridge in South America, it is crucial to consider the region's seismic activity.

To ensure the bridge's safety and durability, I recommend using earthquake-resistant design features, such as base isolation or energy dissipation devices.

It's also important to choose materials with high ductility, like steel or reinforced concrete, which can better withstand the stress from earthquakes.

Additionally, the company should collaborate with local experts and authorities to understand the seismic history and geological conditions of the specific location. Lastly, it is essential to conduct regular maintenance and inspections to ensure the bridge's structural integrity over time.

To learn more about seismic, refer below:

https://brainly.com/question/13725277

#SPJ11

The direction of the total force on charge 1 is in positive x-direction and the magnitude is 7.94 N.

The total force on charge 1 due to the other two charges can be found by calculating the electrostatic force between charge 1 and each of the other charges, and then adding the two forces as vectors.

The electrostatic force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:

[tex]F=k \frac{q_{1}q_{2} }{r^{2} }[/tex]

where k is Coulomb's constant and equal to 9 x 10⁹ Nm²/C².

Since they have opposite signs, the force between charge 1 and charge 2 is attractive.

Given, distance between them, r₁₂ = 7.5 cm = 0.075 m

∴ The magnitude of the force is:

|F₁₂| = {k * |q₁| * |q₂|} / r₁₂²

      = [(9 x 10⁹ Nm²/C²) * (2.1 μC) * (3.2 μC)] / (0.075 m)²

      = 10.75 N.

The direction of the force is towards charge 2, which is in the positive x-direction.

Since they have the same sign, the force between charge 1 and charge 3 is repulsive.

Given, distance between them, r₁₃ = 11 cm = 0.11 m

∴ The magnitude of the force is:

|F₁₃| = {k * |q₁| * |q₃|} / r₁₃²

      = [(9 x 10⁹ m²/C²) * (2.1 μC) * (1.8 μC)] / (0.11 m)²

      = 2.81 N.

The direction of the force is towards charge 3, which is in the negative x-direction.

Total force or Net force on charge 1;

|F| = |F₁₃| - |F₁₂|

    = 10.75 N - 2.81 N (∵ both the forces are in opposite direction)

    = 7.94 N

Therefore, the direction of the total force is in the positive x-direction i.e., towards charge 2.

Learn more about electrostatic force here

brainly.com/question/9774180

#SPJ4

To find the total force exerted on charge 1, we need to calculate the individual forces between charge 1 and charges 2 and 3, and then add them vectorially.

The formula to calculate the electrostatic force between two point charges is given by Coulomb's Law:

F = (k * |q1 * q2|) / r^2

where:

- F is the magnitude of the force

- k is the electrostatic constant (k ≈ 9 × 10^9 N m^2/C^2)

- q1 and q2 are the magnitudes of the charges

- r is the distance between the charges

Let's calculate the forces:

For charge 1 and charge 2:

q1 = -2 μC (converted to Coulombs: -2 * 10^-6 C)

q2 = 2 μC (converted to Coulombs: 2 * 10^-6 C)

r = 7.5 cm (converted to meters: 7.5 * 10^-2 m)

Using Coulomb's Law, we can calculate the force between charge 1 and charge 2:

F1-2 = (k * |q1 * q2|) / r

F1-2 = (9 * 10^9 N m^2/C^2) * (|-2 * 10^-6 C * 2 * 10^-6 C|) / (7.5 * 10^-2 m)^2

Calculating this expression yields the magnitude of the force between charge 1 and charge 2.

Now, let's calculate the force between charge 1 and charge 3:

q3 = -1.8 μC (converted to Coulombs: -1.8 * 10^-6 C)

r = 11 cm (converted to meters: 11 * 10^-2 m)

Using Coulomb's Law, we can calculate the force between charge 1 and charge 3:

F1-3 = (k * |q1 * q3|) / r²

F1-3 = (9 * 10^9 N m^2/C^2) * (|-2 * 10^-6 C * -1.8 * 10^-6 C|) / (11 * 10-²m)²

Calculating this expression yields the magnitude of the force between charge 1 and charge 3.

Finally, to find the total force exerted on charge 1, we need to add the forces F1-2 and F1-3 vectorially. Since charge 2 is at a positive x-coordinate and charge 3 is at a negative x-coordinate, the forces will have opposite directions. Therefore, we subtract the magnitudes of the forces:

F_total = F1-2 - F1-3

Now you can perform the calculations to find the magnitude and direction of the total force exerted on charge 1.

Learn more about electrostatic force here

brainly.com/question/9774180

#SPJ4

When you double your height, your new potential energy is 114 Joules.

The potential energy of an object depends on its height (h) and the force of gravity acting on it (usually denoted as "g"). The formula for gravitational potential energy is given by:

P = mgh

where P is the potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height.

In this case, you have a potential energy of 57 J. Let's assume that the height (h) is constant, and we'll denote it as h1. So, we have:

P = mgh1 = 57 J

Now, you double your height, which means the new height is 2 times the original height (2h1). Let's denote the new height as h2. So, we have:

h2 = 2h1

Substituting this into the formula for potential energy, we get:

P = mgh2 = mg(2h1)

Since h2 = 2h1, we can rewrite the above expression as:

P = 2(mgh1)

But we know that PE1 = mgh1, so we can substitute this value into the equation:

PE2 = 2(PE1)

So, the new potential energy is:

P = 2*57J = 114J

Learn more about potential energy at:

https://brainly.com/question/14427111

#SPJ1

Answer:

As the color of light changes from red to yellow, the frequency of the light increases.

Explanation:

Red light has the longest wavelength and the lowest frequency among visible light, while yellow light has a shorter wavelength and a higher frequency.

The relationship between the frequency and the wavelength of light is given by the equation:

c = λν

where c is the speed of light, λ is the wavelength of light, and ν is the frequency of light.

Since the speed of light is constant in a vacuum, if the wavelength of light decreases as the color changes from red to yellow, then the frequency must increase. This means that yellow light has a higher frequency than red light.

Answer:

Approximately [tex]0.21\; {\rm m}[/tex].

(Assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex].)

Explanation:

As the bottle cap slows down, it lost kinetic energy [tex](\text{KE})[/tex]: [tex]\Delta \text{KE} = (1/2)\, m\, (u^{2} - v^{2})[/tex], where [tex]m[/tex] is the mass of the cap, [tex]v = 1.0\; {\rm m\cdot s^{-1}}[/tex], and [tex]u = 2.0\; {\rm m\cdot s^{-1}}[/tex].

The amount of kinetic energy lost should also be equal to the sum of:

Let [tex]d[/tex] denote the distance that the cap has travelled along the ramp. The height of the cap would have increased by:

[tex]\Delta h = d\, \sin(\theta)[/tex], where [tex]\theta = 20^{\circ}[/tex] is the angle of elevation of the ramp.

The [tex]\text{GPE}[/tex] of the cap would have increased by:

[tex]\Delta \text{GPE} = m\, g\, \Delta h = m\, g\, d\, \sin(\theta)[/tex].

To find the friction on the cap, it will be necessary to find the normal force that the ramp exerts on the cap.

Let [tex]\theta = 20^{\circ}[/tex] denote the angle of elevation of this ramp. Decompose the weight of the cap [tex]m\, g[/tex] (where [tex]m[/tex] is the mass of the cap) into two directions:

The normal force on the cap is entirely within the tangential direction.

Since the cap is moving along the ramp, there would be no motion in the tangential direction. Forces in the tangential direction should be balanced. Hence, the normal force on the cap will be equal in magnitude to the weight of the cap in the tangential direction: [tex]F_{\text{normal}} = m\, g\, \cos(\theta)[/tex].

Since the cap is moving, multiply the normal force on the cap by the coefficient of kinetic friction [tex]\mu_{\text{k}}[/tex] to find the friction [tex]f[/tex] between the ramp and the cap:

[tex]f = \mu_{\text{k}}\, F_{\text{normal}}[/tex].

After a distance of [tex]x[/tex] along the ramp, friction would have done work of magnitude:

[tex]\begin{aligned} (\text{work}) &= f\, s \\ &= (\mu_{\text{k}}\, F_{\text{normal}})\, (d) \\ &= \mu_{\text{k}}\, m\, g\, \cos(\theta)\, d\end{aligned}[/tex].

Overall:

[tex]\begin{aligned} \Delta \text{KE} &= \Delta \text{GPE} + \mu_{\text{k}}\, m\, g\, \cos(\theta)\, d \\ &= m\, g\, \sin(\theta)\, d + \mu_{\text{k}}\, m\, g\, \cos(\theta)\, d \\ &= m\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))\, d\end{aligned}[/tex].

At the same time:

[tex]\Delta \text{KE} = (1/2)\, m\, (v^{2} - u^{2})[/tex].
Therefore:

[tex]\displaystyle \frac{1}{2}\, m\, (v^{2} - u^{2}) = m\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))\, d[/tex].

[tex]\begin{aligned}d &= \frac{m\, (u^{2} - v^{2})}{2\, m\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))} \\ &= \frac{u^{2} - v^{2}}{2\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))} \\ &= \frac{(2.0)^{2} - (1.0)^{2}}{2\, (9.81)\, (\sin(20^{\circ}) + 0.40\, \cos(20^{\circ}))}\; {\rm m} \\ &\approx0.21\; {\rm m}\end{aligned}[/tex].

The distance between the two asteroids is approximately [tex]1.39 * 10^9[/tex]meters.

The gravitational force between two objects can be calculated using the formula:

[tex]F = G * (m_1 * m_2) / r^2[/tex]

where F is the gravitational force, G is the gravitational constant

[tex](6.67 * 10^{-11} Nm^2/kg^2)[/tex].

[tex]m_1[/tex]and [tex]m_2[/tex] are the masses of the two objects, and r is the distance between them.

In this case, we are given that:

[tex]m_1=m_2=1.41 * 10^{14} kg[/tex]

F = 1,030 N

G = [tex]6.67 *10^{-11} Nm^2/kg^2[/tex]

We can rearrange the formula to solve for r:

r = [tex]\sqrt{((G * m_1 * m_2) / F)}[/tex]

Plugging in the given values, we get:

r = [tex]\sqrt{((6.67 * 10^{-11} Nm^2/kg^2 * 1.41 * 10^{14} kg * 1.41 x 10^{14} kg) / 1,030 N) }[/tex]

r = [tex]1.39 * 10^9 meters[/tex]

To know more about gravitational force refer here

https://brainly.com/question/12528243#

#SPJ11

The answer is:

To calculate the electric field at a point due to a point charge, we can use the formula:

[tex]E = k * q / r^2[/tex]

where E is the electric field, k is the Coulomb constant, q is the charge of the point charge, and r is the distance from the point charge to the point where we want to find the electric field.

In this case, we have a + charge of q =[tex]1.50 * 10^{-8} C[/tex] and we want to find the electric field at a point 0.200 m to the right of the charge. Therefore, the distance r = 0.200 m.

Plugging in the values, we get:

E = [tex](9 * 10^9 N*m^2/C^2) * (1.50 * 10^{-8} C) / (0.200 m)^2[/tex]

E = [tex]1.69 * 10^5 N/C[/tex]

The electric field is directed away from the + charge, so we include a + sign to indicate the direction of the field.

[tex]1.69 *10^5 N/C[/tex] to the right (+)

To know more about electric field refer here

https://brainly.com/question/15800304#

#SPJ11

The new 3rd harmonic frequency is 869 Hz. The 3rd harmonic means that the trumpet has three nodes and two antinodes, and the standing wave has three segments.

The frequency of the 3rd harmonic can be found by multiplying the fundamental frequency by 3, so the original length of the trumpet must be such that the 3rd harmonic frequency is 510 Hz.

Using the formula for the wavelength of a standing wave, λ = 2L/n, where L is the length of the trumpet and n is the harmonic number, we can find the original length to be L = (2λ/3). Substituting λ = v/f, where v is the speed of sound and f is the frequency, we get L = (2v/3f).

So, the original length of the trumpet is L = (2 x 343 m/s)/(3 x 510 Hz) = 0.450 m. Adding 0.110 m to the length gives the new length L' = 0.560 m. Using the same formula and harmonic number, we can find the new frequency f' to be f' = (3v/2L') = (3 x 343 m/s)/(2 x 0.560 m) = 869 Hz. Therefore, the new 3rd harmonic frequency is 869 Hz

To know more about harmonic frequency, refer here:

https://brainly.com/question/12320829#

#SPJ11