37° is how far above the horizon the moon is when its image reflected in calm water is completely polarized.
When the moon's image reflected in calm water is completely polarized, it is due to Brewster's angle, which is the angle of incidence at which light with a particular polarization is perfectly transmitted through a transparent dielectric surface, with no reflection. In this scenario, the angle of incidence and the angle of refraction are related through the refractive indices of the two media (air and water) and Snell's law.
For complete polarization, the tangent of Brewster's angle equals the ratio of the refractive indices of water and air (approximately 1.33). Therefore, Brewster's angle is about 53°. Since the angle of incidence and the angle of elevation are complementary angles, the angle of elevation (how far above the horizon the moon is) is approximately 90° - 53° = 37°.
More on reflection: https://brainly.com/question/31111301
#SPJ11
Describe the reasons we do not see much early history of Earth on our planet and how we have been able to determine the history
While the early history of Earth may not be visible on the planet's surface, scientific methods such as studying meteorites, analyzing isotopes, and using computer models have allowed us to gain insight into its history.
There are several reasons why we do not see much of the early history of Earth on our planet. Firstly, the Earth's surface is constantly changing due to natural processes like erosion, tectonic activity, and weathering. This means that much of the original geological features and formations from the early Earth have been altered or destroyed. Secondly, many of the rocks and materials that make up the Earth's surface are recycled through the planet's mantle, making it difficult to find and study the oldest materials.
However, scientists have been able to determine the history of the Earth through a variety of methods. One method is through the study of meteorites, which are believed to be remnants of the early solar system and can provide information about the formation and evolution of the Earth.
Another method is through the analysis of isotopes found in rocks, which can provide information about the age and composition of the materials. Additionally, scientists can use computer models to simulate the early Earth and test hypotheses about its history. Overall, while we may not be able to physically see much of the early history of Earth, we have been able to gain insight into it through a variety of scientific methods.
To learn more about the planet's surface
https://brainly.com/question/18805229
#SPJ4
The two popular operating voltages for residences are 115V (120V) and 230V (240V).
a. True
b. false
The given statement "the two popular voltages for residences of 115v and 230v" is a. true.
In most countries, the two popular operating voltages for residences are 115V (120V) and 230V (240V).
The voltage supplied to residences depends on the country's electrical system and is determined by factors such as the power grid infrastructure, the amount of power required by the home, and safety regulations.
In the United States, the standard voltage for residential use is 120V, while in many European countries, the standard voltage is 230V.
However, it's worth noting that there may be variations within countries or regions, and some appliances or electronic devices may be designed to operate only at specific voltage levels.
It's important to follow the manufacturer's recommendations and use appropriate voltage converters or adapters when traveling to different countries to avoid damaging devices or causing safety hazards.
To learn more about voltage, refer below:
https://brainly.com/question/29445057
#SPJ11
A 400-w computer (computer plus monitor) is turned on 8.0 hours per day. if electricity costs 10 cents per kwh, how much does it cost to run the computer annually?
It would cost $116.80 per year to run the computer and 1168 kWh/year energy consumed annually.
First, we need to calculate the energy consumed by the computer in 8 hours:
Power (in kilowatts) = 400 W / 1000 = 0.4 kW
Energy consumed in 8 hours = Power x Time = 0.4 kW x 8 hours = 3.2 kWh
Next, we can calculate the energy consumed annually:
Energy consumed annually = Energy consumed in 8 hours x Number of 8-hour periods in a year
Energy consumed annually = 3.2 kWh/day x 365 days/year = 1168 kWh/year
Finally, we can calculate the cost to run the computer annually:
Cost = Energy consumed x Cost per kWh
Cost = 1168 kWh/year x $0.10/kWh = $116.80/year
Know more about energy here:
https://brainly.com/question/1932868
#SPJ11
light trucks have a high center of gravity which increases their susceptibility to_______.
The answer is that light trucks have a high center of gravity which increases their susceptibility to rollovers.
A high center of gravity means that the mass of the vehicle is concentrated higher above the ground. This causes the vehicle to be less stable during turns or abrupt maneuvers, making it more prone to tipping over or rolling. In the case of light trucks, their design and construction lead to this high center of gravity, which ultimately increases their risk of experiencing rollovers compared to other vehicles with a lower center of gravity. It is essential for drivers of light trucks to be aware of this risk and drive cautiously, especially during turns or on uneven surfaces, to minimize the chances of a rollover accident.
To know more about gravity visit:
brainly.com/question/31321801
#SPJ11
at what frequencies (in radians per second) is the magnitude of the transfer function equal to unity? express your answers in radians per second to three significant figures. enter your answers in ascending order separated by a comma.
The magnitude of the transfer function is equal to unity when the gain of the system is equal to 1 or 0dB. This occurs at the system's resonant frequency or cutoff frequency depending on the type of system.
The resonant frequency is the frequency at which the system's response is maximum and occurs in systems with a natural frequency such as RLC circuits. The cutoff frequency is the frequency at which the system's response begins to roll off and occurs in systems with a bandwidth such as filters.
Therefore, to find the frequencies at which the magnitude of the transfer function is equal to unity, we need to determine the resonant or cutoff frequencies of the system. This can be done by analyzing the transfer function and identifying the frequency-dependent terms.
Once the resonant or cutoff frequencies have been determined, we can convert them to radians per second by multiplying by 2π. We express our answers in ascending order separated by a comma and to three significant figures.
In summary, the frequencies at which the magnitude of the transfer function is equal to unity depend on the resonant or cutoff frequencies of the system and can be found by analyzing the transfer function. We then convert these frequencies to radians per second to express our answers.
Learn more about bandwidth here:
brainly.com/question/28436786
#SPJ11
consider a steam engine whose working fluid always stays within the quality range of 0.0 to 1.0. the system operates between the pressure limits of 6.8 mpa and 1.21 mpa. if heat is supplied to the engine at a rate of 250 kw, what is the maximum power that could be produced by the engine?
The maximum power that could be produced by the steam engine is approximately 88.2 kW. The maximum power that could be produced by the steam engine can be calculated using the thermodynamic equation for the efficiency of a Carnot cycle, which is given by:
η = (T₁ - T₂) / T₁
where η is the efficiency, T₁ is the temperature of the heat source, and T₂ is the temperature of the heat sink. In this case, the heat source temperature is unknown, but we can find it using the saturation temperature at the pressure of 6.8 MPa, which is approximately 364°C. Similarly, the temperature at the heat sink pressure of 1.21 MPa is approximately 191°C.
Using the efficiency equation and the given heat input rate of 250 kW, we can calculate the maximum power output of the steam engine as:
P max = η * Qin
where P max is the maximum power output and Qin is the heat input rate. Plugging in the values, we get:
P max = η * 250 kW = (364 - 191) / 364 * 250 kW ≈ 88.2 kW
Therefore, the maximum power that could be produced by the steam engine is approximately 88.2 kW.
Learn more about Carnot cycle here:
https://brainly.com/question/31645644
#SPJ11
what is ceres? what is ceres? a dwarf planet that orbits the sun in the kuiper belt beyond the orbit of pluto the largest known asteroid the largest moon of pluto the first asteroid to have been visited by a spacecraft
Ceres is not a dwarf planet that orbits the sun in the Kuiper Belt beyond the orbit of Pluto. Instead, it is the largest known asteroid in our solar system, located in the main asteroid belt between Mars and Jupiter.
Ceres was also the first asteroid to have been visited by a spacecraft, NASA's Dawn mission. It is not the largest moon of Pluto, as Pluto's largest moon is Charon.
It is the largest known asteroid and was the first asteroid to have been visited by a spacecraft, specifically NASA's Dawn mission in 2015. Please note that Ceres is not located in the Kuiper Belt, nor is it the largest moon of Pluto.
To know more about ceres, refer
https://brainly.com/question/23117824
#SPJ11
for every __________ degree drop in temperature, your tires lose one pound of air pressure.
For every 10-degree drop in temperature, your tires lose one pound of air pressure.
This is because as the temperature drops, the air inside the tire contracts, causing the pressure to decrease. It is important to regularly check your tire pressure, especially during colder months, as underinflated tires can lead to decreased fuel efficiency, poor handling, and even increased risk of accidents.
You can check your tire pressure using a tire pressure gauge, which can be purchased at most auto stores. It is also important to note that tire pressure should be checked when the tires are cold, as driving even a short distance can cause the tires to heat up and the pressure to increase, giving an inaccurate reading. Maintaining proper tire pressure can not only improve safety but also extend the lifespan of your tires.
To know more about air pressure click here:
https://brainly.com/question/15189000
#SPJ11
what is solar thermal energy used to do?responses heat homes and power homesheat homes and power homesheat and power homes and heat waterheat and power homes and heat waterheat homes and waterheat homes and waterheat homes
Solar thermal energy is primarily used to heat homes and water, as well as to power homes. This type of renewable energy works by capturing the sun's rays and converting them into heat energy, which can be used for a variety of purposes.
It typically involves the use of solar panels or collectors that are installed on a roof or other area where they can receive direct sunlight. These panels contain a special fluid or gas that absorbs the sun's energy and heats up as a result. This heat energy can then be used to heat water, which can be used for domestic purposes such as bathing, washing clothes, and cooking.
In addition to heating water, solar thermal energy can also be used to heat homes and power homes. This is typically done through the use of a solar thermal system that includes a heat exchanger, which transfers the heat from the solar panels to the home's heating or cooling system. This can help to reduce energy costs and make homes more environmentally friendly.
Overall, solar thermal energy is a versatile and renewable source of energy that can be used in a variety of ways to help reduce our dependence on fossil fuels and reduce our carbon footprint.
Solar thermal energy systems collect and convert sunlight into heat, which can be used for various purposes. These systems typically use solar collectors to capture the sun's energy, and a heat transfer fluid to distribute the heat throughout a building or to heat water.
1. Solar collectors capture sunlight and convert it into heat.
2. Heat transfer fluid absorbs the heat and transports it to a heat exchanger.
3. The heat exchanger transfers the heat to water or air, which can be used for space heating, domestic hot water, or even heating a swimming pool.
4. In some cases, solar thermal energy can also be used to generate electricity by powering a turbine or an engine. This is called a solar thermal power plant.
In summary, solar thermal energy is a versatile and sustainable solution for heating homes and water, as well as generating electricity in certain situations.
To know more about heat exchanger refer to
https://brainly.com/question/22595817
#SPJ11
What is the wave speed of a traveling wave with a period of 2s and a wavelength of 6m?
What is the force exerted by a spring with spring constant 50N/m on a mass that was stretched to the right 2m?
List 5 examples of waves making sure to have at least one electromagnetic wave, 1 longitudinal wave, and 1 transverse wave.
Draw a diagram of the doppler effect. (If you’re completing this electronically, draw a picture and then take a picture of it to put in here)
What is the frequency of a wave traveling at 17m/s with wavelength 51m?
What is the spring constant in a spring that exerts a 50N force after a displacement of -.5m?
What is the wavelength of a wave traveling at 5m/s with a frequency of 40 Hz?
If frequency and period are inverses, what is the period of a wave with frequency of .1 Hz?
Eli and Bryce watch a pendulum swing back and forth 10 total times in 35 seconds. What is the period of the pendulum?
What is the period of the Earth making revolutions around the Sun in seconds? What is the frequency in Hz?
Is this wave mechanical or electromagnetic? Can you tell?
Is this wave transverse or longitudinal? Can you tell?
What is the amplitude?
What is the period?
What is the frequency?
If the wavelength is 7m, what is the wave speed?
Wavelength of the wave, λ = 6 m
Time period of the wave, T = 2s
1) Force exerted by the spring,
F = -kx
F = -50 x 2
F = -100 N the -ve sign indicates the restoring force.
2) Frequency of the wave,
f = v/λ
f = 17/51
f = 0.33 Hz
3) Spring constant in the spring,
k = - F/x
k = -50/-5
k = 10 N/m
4) Wavelength of the wave,
λ = v/f
λ = 5/40
λ = 0.125 m
5) Time period of the wave,
T = 1/f
T = 1/0.1
T = 10 s
6) Period of the pendulum,
T = t/n
T = 35/10
T = 3.5 s
To learn more about time period, click:
https://brainly.com/question/15780863
#SPJ1
As the diameter of the wire increases, the AWG number_____, and the resistance of the conductor_____.
As the diameter of the wire increases, the AWG number decreases, and the resistance of the conductor decreases.
AWG (American Wire Gauge) is a standard used to measure the diameter of wires, with smaller numbers indicating larger wire diameters.
Resistance is a measure of how difficult it is for an electric current to flow through a wire, with higher resistance causing a reduction in the amount of current that can pass through the wire.
When the wire diameter increases, the cross-sectional area of the wire also increases, which means there is more space for the electric current to flow through, resulting in lower resistance.
Therefore, a larger diameter wire has a lower AWG number and lower resistance, making it a more efficient conductor of electric current.
To learn more about conductor, click here:
https://brainly.com/question/18084972
#SPJ11
observationally, how can we decide which of the four general expansion models best describes the present-day universe?
We can choose which of the four general expansion models best describes the current universe by observational analysis of precise measurements of the distances between galaxies.
The most effective method of observation is to precisely measure the separations between galaxies. White dwarf supernovae are the ideal standard candles for such observations at such distances.
Everything in the cosmos was compressed into a singularity, a point of infinite heat and density, around 13.7 billion years ago. Our cosmos suddenly began to expand explosively, expanding faster than the speed of light.
Read more about general expansion at
https://brainly.com/question/7451040
#SPJ4
as rotating winds pull into a tighter and tighter spiral, wind speeds increase due to the conservation of
As rotating winds pull into a tighter and tighter spiral, wind speeds increase due to the conservation of angular momentum.
When no external torques are acting on the system, the physical attribute of angular momentum, which describes the rotational motion of an item, is preserved. When air travels inward towards the centre of rotation in rotating winds, such as those in a tornado or cyclone, the angular momentum is conserved, spiralling the winds and tightening the storm system.
The circular path's radius reduces as the air moves in closer proximity to the centre of rotation, which lowers the moment of inertia. The conservation of angular momentum states that in order to preserve the same amount of angular momentum as the moment of inertia falls, the angular velocity must rise.
Read more about angular momentum on:
https://brainly.com/question/4126751
#SPJ4
A helicopter moves past several clouds at a velocity of 5 km/h in the north direction. The clouds move past the ground at a velocity of 3.5 hours north how fast is the helicopter going past the ground?
The helicopter is moving at a velocity of 8.5 km/h in the north direction with respect to the ground.
What is the velocity of the helicopter ?The velocity of the helicopter with respect to the ground is calculated as follows;
Velocity of helicopter in the north direction = 5 km/h
Velocity of clouds moving past the ground = 3.5 km/h in the north direction
Vr/g = Vn + Vc
where;
Vr/g is the velocity of helicopter with respect to the ground Vn is the velocity of helicopter in the north Vc is the velocity of clouds moving past the groundVr/g = 5 km/h + 3.5 km/h
Vr/g = 8.5 km/h
Learn more about ground velocity here: https://brainly.com/question/24208048
#SPJ1
If you heat a gas so that collisions are continually bumping electrons to higher energy levels, when the electrons fall back to lower energy levels the gas produces
an emission line spectrum.
emits a photon of a specific frequency.
an absorption line spectrum.
The type of spectrum that a gas produces when heated depends on whether it emits or absorbs photons. In the case of continually bumping electrons to higher energy levels, the gas produces an emission line spectrum.
When a gas is heated, its atoms and molecules gain kinetic energy and collide with each other, which can result in the excitation of electrons to higher energy levels. If these excited electrons subsequently return to lower energy levels, they emit photons of specific frequencies, producing an emission line spectrum. This process is known as emission spectroscopy.
On the other hand, if a gas is exposed to a continuous spectrum of light, such as white light, and the gas atoms or molecules absorb photons of specific frequencies that correspond to the energy differences between their energy levels, they can become excited. This results in an absorption line spectrum, where certain frequencies of the continuous spectrum are missing due to the absorbed photons. This process is known as absorption spectroscopy.
For more such questions on photons
https://brainly.com/question/30130156
#SPJ11
an experiment is run in which the magnitude of the electric field e and magnetic field b in a laboratory device are measured as functions of time t. which conclusion below is best supported by the data above?responsesthe device is having trouble measuring the electric and magnetic fields as both fields are not present in the device at all of times indicated.the device is having trouble measuring the electric and magnetic fields as both fields are not present in the device at all of times indicated.the electric field will always be zero when the magnetic field is 4.0t.the electric field will always be zero when the magnetic field is 4.0 teslas .the magnetic field will produce an electric flux inside the device, which will in turn produce an electric field.the magnetic field will produce an electric flux inside the device, which will in turn produce an electric field.a changing magnetic field can induce an electric field.a changing magnetic field can induce an electric field.a changing electric field can induce a magnetic field.
Changing magnetic field can induce an electric field.
The strength of the electric field at any given location is inversely proportional to the pace at which the magnetic field is changing there.
The opposite is also true: the electric field's rate of change is inversely correlated with the strength of the magnetic field.
According to Faraday's Law, a current whose magnitude depends on the rate of change of the magnetic field will flow when the strength of a magnetic field changes within a loop of wire.
To learn more about electric field, click:
https://brainly.com/question/8971780
#SPJ1
Two objects X and Y move directly towards each other. The objects have the same mass.
Object X has a velocity of 5. 0m/s to the right. Object Y has a velocity of 3. 0m/s to the left
The velocity of the combined object after the collision is 2.0 m/s to the right.
X and Y are two things that travel in the same direction. The mass of the things is the same. 5.0 m/s is the velocity of object x as it moves to the right. The velocity of object y to the left is 3.0 m/s. Objects x and y collide and adhere to one another. Following their collision, they both move at a speed of 1.0 m/s to the right.
Their velocity after colliding is 2.0 m / s to the right
What is the velocity during the collision?In a collision, the velocity change is always computed by subtracting the initial value from the final value.If an object is moving in one direction before a collision and rebounds or somehow changes direction, then its velocity after the collision has the opposite direction as before.Inelastic collisions occur when only the momentum is conserved but not the system's kinetic energy. Perfectly inelastic collisions happen when objects stick together and have a common velocity after collision.To solve for the final velocity in perfectly inelastic collisions, use v' = (m1v1 + m2v2)/m1 + m2.The magnitude of the relative velocity is the same before and after the collision.To learn more about velocity, refer to:
brainly.com/question/25749514
#SPJ4
Full Question: Two objects X and Y move directly towards each other. The objects have the same mass.
Object X has a velocity of 5.0 m/s to the right. Object Y has a velocity of 3.0 m/s to the left.
Object X and object Y collide and stick together.
What is their velocity after colliding?
Work Energy and Power Crossword
The crosswords based on the information will be:
5. Mechanical energy
Work
Solar radiation
Watts (W)
Wind turbine
Hydroelectric power
Thermal energy
Capacitor
Increase its speed/velocity
Electromagnetic energy
Down
Conservation of energy
Lever
Newtons (N)
Kinetic energy
Foot-pounds (ft-lb) or British Thermal Units (BTUs)
Power
Geothermal energy
Field
Increase its height
Joules (J)
Friction
Radiant energy
Potential energy
Lever
Nuclear energy
Mass
What is mechanical energy?Mechanical energy (kinetic energy or potential energy) is the energy of either an object in motion or the energy that is stored in objects by their position.
Mechanical energy is also a driver of renewable energy. Many forms of renewable energy rely on mechanical energy to adequately produce power or convert energy.
Learn more about energy on
https://brainly.com/question/30403434
#SPJ1
what is the peak current if the inductance l is doubled? express your answer with the appropriate units.
The peak current will decrease if the inductance is doubled. This is because of the equation V = L di/dt, where V is the voltage applied to the inductor, L is the inductance, di/dt is the rate of change of current. If L is doubled, then the rate of change of current will be halved for a given voltage, which means that the peak current will also be halved. Therefore, the peak current is inversely proportional to the inductance. The units for peak current are amperes (A).
We need to consider the equation for the current in an inductor:
I = V * t / L
where I is the current, V is the voltage, t is time, and L is the inductance.
Now, let's double the inductance, making it 2L:
I' = V * t / (2L)
Comparing the two equations, we can see that the new current (I') will be half of the original current:
I' = I / 2
So, the peak current when the inductance is doubled will be half of the original peak current. Make sure to use the appropriate units for current, which is typically Amperes (A).
To know more about inductance visit:
https://brainly.com/question/29981117
#SPJ11
Which of these vary for satellites in circular orbits?
kinetic energy.
momentum.
speed.
(none of the above)
For satellites in circular orbits, the term that varies is kinetic energy. The kinetic energy of a satellite depends on its mass and speed, which can differ for various satellites. However, the momentum and speed remain constant for a satellite in a circular orbit, as they maintain a consistent orbital velocity.
The variable term for satellites in circular orbits is kinetic energy. A satellite's mass and speed, which might vary for different satellites, are what determine how much kinetic energy it has. However, because a satellite in a circular orbit keeps a constant orbital velocity, its momentum and speed remain constant.
To know more about satellites click here:
https://brainly.com/question/2522613
#SPJ11
what are the three types of radiation as discovered by ernest rutherford? give in alphabetical order.
The three types of radiation discovered by Ernest Rutherford are alpha, beta, and gamma radiation.
In alphabetical order, the three types of radiation are:
1. Alpha radiation: These are helium nuclei consisting of 2 protons and 2 neutrons. They have a positive charge and are relatively large compared to other types of radiation. Alpha particles have low penetration power and can be stopped by a sheet of paper or the outer layer of human skin.
2. Beta radiation: These are high-energy electrons or positrons emitted by certain radioactive nuclei. Beta particles have a negative charge (for electrons) or positive charge (for positrons) and are smaller and more penetrating than alpha particles. They can be stopped by a sheet of aluminum or plastic.
3. Gamma radiation: These are electromagnetic waves with high energy and no charge. Gamma rays are the most penetrating form of radiation and can pass through several centimeters of lead or concrete. They require thick shielding to protect against exposure.
To know more about Ernest Rutherford visit:
brainly.com/question/13934832
#SPJ11
you ride your bike at 10.5 m/s directly away from your neighbor's trumpet sound and toward the sound of another neighbor's trombone and find that you hear both instruments at exactly the same pitch. the trumpeter is practicing her middle c at a frequency of 262 hz . what frequency is the trombonist producing? the speed of sound in air is 339 m/s .
The trombonist is producing a sound wave with a frequency of 262 Hz.
The first thing we need to do is to find the frequency of the sound wave that is reaching you from your neighbor's trumpet. We can use the formula:
f = v / λ
where f is the frequency of the sound wave, v is the speed of sound in air, and λ is the wavelength of the sound wave. Since you are moving away from the trumpet, the frequency of the sound wave that you hear is lower than the frequency that the trumpeter is producing. This is because the sound waves are getting stretched out as they travel through the air, similar to the way that a spring would stretch out if you pulled on it.
To calculate the wavelength of the sound wave, we can use the formula:
λ = v / f
where λ is the wavelength, v is the speed of sound in air, and f is the frequency of the sound wave. We know that the frequency of the sound wave from the trumpet is 262 Hz, so we can plug that into the formula to get:
λ = 339 m/s / 262 Hz
λ = 1.29 m
Now that we know the wavelength of the sound wave from the trumpet, we can use that to find the frequency of the sound wave from the trombone. The two sound waves are in phase, which means that they are at the same point in their cycles at the same time. This is why they sound like they are at the same pitch. To be in phase, the sound waves must have the same wavelength. Since we know the wavelength of the sound wave from the trumpet, we can set that equal to the wavelength of the sound wave from the trombone:
λ trumpet = λ trombone
Using the formula for wavelength, we can rearrange this to:
f trumpet / v = f trombone / v
which simplifies to:
f trumpet = f trombone
This means that the frequency of the sound wave from the trombone is also 262 Hz. We can confirm this by using the formula for frequency with the wavelength that we found for the trumpet:
f = v / λ
f = 339 m/s / 1.29 m
f = 262 Hz
The trombonist is producing a sound wave with a frequency of 262 Hz.
To know more about sound waves, refer
https://brainly.com/question/1199084
#SPJ11
a smll airplane leaves a airport over an overast day . it is later sighted 250 km away in a direction making an angle of 22 degrees is of north. how far north is the airplane sighted from the airport?
The small airplane is sighted approximately 231.8 km north of the airport, Given that the airplane left the airport and was later seen 250 km away, making an angle of 22 degrees east of north, we can treat this situation as a right-angled triangle with the angle between the north direction and the airplane's position being 22 degrees.
To find the distance north, we'll use the cosine function. The formula for cosine is:
cos(angle) = adjacent side / hypotenuse
In this case, the adjacent side represents the distance north, and the hypotenuse is the total distance of 250 km. We want to find the adjacent side, so we'll rearrange the formula as:
adjacent side = hypotenuse * cos(angle)
Plugging in the values:
adjacent side = 250 km * cos(22 degrees)
Ensure your calculator is set to degrees mode, and then compute the cosine value. Multiply it by 250 km:
adjacent side ≈ 250 km * 0.9272 ≈ 231.8 km
The small airplane is sighted approximately 231.8 km north of the airport.
learn more about right-angled triangles here: brainly.com/question/19040476
#SPJ11
Is it speed, velocity, or acceleration of a football just after being kicked?
It is velocity of a football just after being kicked. Velocity is the speed and direction of an object, and it is a vector quantity, meaning it has both magnitude and direction.
When a football is kicked, it has a certain velocity in a particular direction, which can be measured using a speedometer or other measuring device. Acceleration, on the other hand, refers to the rate of change of velocity, so it would only be relevant if the football's velocity was changing after being kicked (for example, if it were slowing down due to air resistance or gravity).
Learn more about Velocity ,
https://brainly.com/question/17127206
#SPJ4
what happens the second time dr. hewitt lifts the bowling ball near his teeth and gives it a push?
The second time Dr. Hewitt lifts the bowling ball near his teeth and gives it a push, the same forces are at play as the first time he did so. When he lifts the ball, he exerts an upward force equal to the weight of the ball to overcome gravity.
When he gives it a push, he applies a forward force to the ball. The friction between the ball and the ground opposes the motion of the ball, but eventually, the ball starts moving forward.
Assuming Dr. Hewitt applies the same amount of force, the ball will move at the same speed and cover the same distance as the first time. However, if he applies more force or pushes it in a different direction, the ball's speed and direction will change.
It is important to note that repeatedly lifting heavy objects near one's teeth can be dangerous, as it can strain the neck and back muscles and cause injury. It is best to use proper lifting techniques and seek assistance when handling heavy objects.
To know more about bowling ball click here:
https://brainly.com/question/30928102
#SPJ11
wbat happens if she turns the bike wheel upside down from how it started
If you turn a bike wheel upside down from how it started, several things could happen. First, the direction of rotation would be reversed. This means that if the wheel was previously rotating clockwise, it would now be rotating counterclockwise. Second, the orientation of the spokes and rim would be reversed. This could affect the structural integrity of the wheel if it is not designed to handle this type of stress.
Finally, the tire and inner tube would also be reversed, which could cause issues with air pressure and stability when riding. Overall, it is not recommended to turn a bike wheel upside down unless it is necessary for maintenance or repair purposes.
If she turns the bike wheel upside down from how it started, the following occurs:
1. First, she would need to disassemble the wheel from the bike by loosening the axle nuts or releasing the quick-release mechanism.
2. After removing the wheel, she can flip it upside down, meaning that the side that was initially facing the ground will now face upwards.
3. When reattaching the wheel, it's crucial to ensure that the tire tread pattern and rotation direction are still correct for optimal traction and safety.
4. Once the wheel is securely attached, the bike's performance may be slightly affected, depending on factors such as tread pattern or wheel alignment.
In summary, turning the bike wheel upside down involves disassembly, flipping, and reattachment, while ensuring proper alignment and tire orientation for safety and performance.
For more information on structural integrity visit:
brainly.com/question/30558063
#SPJ11
The same rifle fires a bullet with mass 11.7 g at the same speed as before. for the same idealized model, find the ratio of the final kinetic energies of the bullet and rifle.
The final kinetic energy of the bullet is much smaller than that of the rifle, with a ratio of approximately 0.0029.
The kinetic energy of an object is given by the formula [tex]KE = (1/2)mv^2[/tex], where m is the mass of the object and v is its velocity. Since the rifle and bullet are fired at the same speed as before, the ratio of their final kinetic energies will depend only on their masses.
Let the mass of the rifle be M and the mass of the bullet be m. The ratio of the final kinetic energies of the bullet and rifle is given by:
[tex]KE_bullet/KE_rifle = (1/2)mv^2 / (1/2)Mv^2[/tex]
Simplifying this expression, we get:
[tex]KE_bullet/KE_rifle = m/M[/tex]
Substituting the given values, we get:
m = 11.7 g = 0.0117 kg
M = 4.0 kg
Therefore, the ratio of the final kinetic energies of the bullet and rifle is:
[tex]KE_bullet/KE_rifle[/tex] = m/M = 0.0117 kg / 4.0 kg = 0.002925
Thus, the final kinetic energy of the bullet is much smaller than that of the rifle, with a ratio of approximately 0.0029. This is because the bullet has a much smaller mass than the rifle, even though both were fired at the same speed.
To know more about kinetic energy refer to-
https://brainly.com/question/26472013
#SPJ11
the table below shows latent heat of fusion values for 5 objects. all 5 objects have the same mass and are at their respective melting points. which one of the objects will require the greatest amount of heat to melt?
The latent heat of fusion is the amount of heat required to change a substance from a solid to a liquid at its melting point. The greater the value of latent heat of fusion, the more energy is required to melt the substance. Therefore, the object with the highest value of latent heat of fusion will require the greatest amount of heat to melt. Looking at the table, we can see that Object D has the highest value of latent heat of fusion, which means it will require the greatest amount of heat to melt compared to the other objects. It is important to note that all objects have the same mass and are at their respective melting points, so the difference in latent heat of fusion is the only factor affecting the amount of heat required for melting.
Hi there! To determine which object requires the greatest amount of heat to melt, you'll need to look for the highest "latent heat of fusion" value in the table. The latent heat of fusion represents the amount of heat needed to change a substance from a solid to a liquid at its melting point without changing its temperature. Since all 5 objects have the same mass and are at their respective melting points, the object with the highest latent heat of fusion value will require the most heat to melt. Simply identify the highest value in the table and that will be your answer.
To know more about latent heat of fusion visit:
brainly.com/question/30762921
#SPJ11
A ray of 610 nm light goes from air into fused quartz at an incident angle of 55.0 degrees. At what incident angle must 470nm light enter flint glass to have the same angle of refraction?
The incident angle of 470 nm light in flint glass that would result in the same angle of refraction as the 610 nm light in fused quartz is approximately 46.8 degrees.
The incident angle of the 610 nm light ray in fused quartz can be calculated using Snell's law:
n_air * sin(theta_air) = n_quartz * sin(theta_quartz)
where n_air is the refractive index of air (approximately 1), n_quartz is the refractive index of fused quartz for 610 nm light (approximately 1.46), theta_air is the incident angle in air (55.0 degrees), and theta_quartz is the angle of refraction in fused quartz.
Solving for theta_quartz, we get:
theta_quartz = sin^-1((n_air/n_quartz) * sin(theta_air))
theta_quartz = sin^-1((1/1.46) * sin(55.0))
theta_quartz = 36.1 degrees
Now, to find the incident angle of 470 nm light in flint glass that would result in the same angle of refraction, we use Snell's law again:
n_air * sin(theta_air) = n_flint * sin(theta_flint)
where n_flint is the refractive index of flint glass for 470 nm light (approximately 1.62) and theta_flint is the incident angle in flint glass.
We want theta_flint to be the same as theta_quartz, so we set them equal to each other:
theta_flint = theta_quartz
sin(theta_air) / sin(theta_flint) = n_flint / n_quartz
sin(55.0) / sin(theta_flint) = 1.62 / 1.46
sin(theta_flint) = sin(55.0) * 1.46 / 1.62
theta_flint = sin^-1(sin(55.0) * 1.46 / 1.62)
theta_flint = 46.8 degrees
To know more about incident angle click here
brainly.com/question/13200721
#SPJ11
Lab Report
Energy
It’s time to complete your Lab Report. Save the lab to your computer with the correct unit number, lab name, and your name at the end of the file name (e.g., U1_ Lab_Energy_Alice_Jones.doc).
Introduction
1. What was the purpose of the experiment?
Type your answer here:
2. What were the independent, dependent, and control variables in your investigation? Describe the variables for the first part of the experiment.
Type your answer here:
The purpose of the experiment conducted in Lab Report 1 was to investigate the effects of different levels of light on plant growth. Specifically, the experiment aimed to determine if plants exposed to different levels of light will grow at different rates.
In terms of variables, the independent variable in the investigation was the amount of light exposure, which was manipulated by placing the plants under different levels of light.
The dependent variable was the growth of the plants, which was measured by recording the height of each plant at specific intervals throughout the experiment. The control variable in this investigation was the type of plant used and the conditions under which they were grown, such as the amount of water and soil used.
In the first part of the experiment, the variables remained the same as described above. However, the independent variable was divided into three levels: low light, moderate light, and high light. The plants were randomly assigned to one of the three groups and placed under the corresponding light conditions.
The growth of the plants in each group was then recorded and compared to determine if there was a significant difference in growth rates between the groups.
For more such questions on the experiment:
https://brainly.com/question/30055326
#SPJ11