How does photo synthesis and cellular respiration show evidence of the law of conservation of matter

The metal would be the cathode and Zinc would be the anode. There must be an anode and a cathode in an electrochemical cell.

Steps to electroplate a metal with zinc:

Prepare the electrolyte solution: Dissolve zinc sulfate in water to make a solution. This will serve as the electrolyte solution.

Prepare the metal to be plated (cathode): Clean the metal to be plated thoroughly to remove any dirt, grease, or other contaminants. This is important to ensure good adhesion of the zinc plating.

Prepare the zinc anode: Clean the zinc anode thoroughly and suspend it in the electrolyte solution.

Set up the electroplating apparatus: Connect the positive terminal of the power supply to the zinc anode and the negative terminal to the metal to be plated (cathode). Place the metal to be plated (cathode) in the electrolyte solution.

Start the electroplating process: Apply a direct current (DC) voltage to the electrodes. This will cause the zinc ions in the electrolyte solution to be attracted to the metal to be plated (cathode) and deposit on its surface.

Learn more about electroplating:https://brainly.com/question/20112817

#SPJ1

As no visible reaction occurs, then the experiment shows that copper does not react with dilute HCl, confirming that copper is not reactive with HCl under normal conditions.

To demonstrate that copper does not react with dilute hydrochloric acid (HCl), you can carry out the following experiment:

Materials:

Procedure:

Conclusion:

If no visible reaction occurs, then the experiment shows that copper does not react with dilute HCl, confirming that copper is not reactive with HCl under normal conditions.

Learn more about reaction of copper here: https://brainly.com/question/27172907

#SPJ1

Answer:

Moderately hard water – 61 to 120 mg/L (PPM) or 3.56 to 7 GPG. Hard water – 121 to 180 mg/L (PPM) or 7.06

Explanation:

Answer:

The balloon filled with 02 collapses because the gas molecules are attracted to each other and condense into a liquid when cooled. Helium, on the other hand, is a noble gas that does not form compounds with other elements and therefore does not condense into a liquid at low temperatures.

To draw the skeletal structure from a Lewis structure, you need to identify the central atom and its bonded atoms.

To draw the skeletal structure from a Lewis structure, you need to identify the central atom and its bonded atoms. The central atom is usually the least electronegative atom in the molecule, and it is surrounded by the other atoms that are bonded to it.

Here are the steps to draw the skeletal structure from a Lewis structure:

Identify the central atom: In the Lewis structure, the central atom is usually the atom that has the most connections to other atoms.

Count the total number of atoms: Count the total number of atoms in the molecule or ion.

Replace the bonding electrons with dashes: Replace the bonding pairs of electrons between the atoms with dashes (-).

Arrange the atoms: Arrange the atoms in a way that makes sense based on their connectivity in the Lewis structure. The atoms should be positioned in a way that minimizes the number of intersections between the dashes.

Add lone pairs: If there are any lone pairs of electrons on the central atom, add them to the skeletal structure as dots.

Check for consistency: Make sure the skeletal structure you have drawn is consistent with the Lewis structure in terms of the number of electrons, the types of atoms, and the bonding pattern.

Learn more about Lewis structure:https://brainly.com/question/20300458

#SPJ1

The type of chemical reaction takes place when magnesium metal is added to a solution of iron(ll) sulfate is displacement reaction.

Magnesium sulfate in large doses may be toxic.

A catalyst is a substance that speeds up a chemical reaction, or lowers the temperature or pressure needed to start one, without itself being consumed during the reaction.

A universal indicator is a pH indicator made of a solution of several compounds that exhibits several smooth colour changes over a wide range pH values

A displacement reaction is a type of reaction in which part of one reactant is replaced by another reactant. A displacement reaction is also known as a replacement reaction or a metathesis reaction.

Single displacement reactions are reactions where one reactant replaces part of the other:

AB + C → AC + B

An example is the reaction between iron and magnesium sulfate to produce iron sulfate and copper:

Fe + MgSO₄ → FeSO₄ + Mg

Therefore,

The type of chemical reaction takes place when magnesium metal is added to a solution of iron(ll) sulfate is displacement reaction.

Magnesium sulfate in large doses may be toxic.

A catalyst is a substance that speeds up a chemical reaction, or lowers the temperature or pressure needed to start one, without itself being consumed during the reaction.

A universal indicator is a pH indicator made of a solution of several compounds that exhibits several smooth colour changes over a wide range pH values

Learn more about Displacement reaction, here:

https://brainly.com/question/29307794

#SPJ1

A piece of metal with a mass of 14.9 g is heated from 72.35°C. When the metal is placed in 75.0 g of water at 20.0°C, the temperature of the water rises by 2.85°C. 66.35 joule/Kg °C is the specific heat capacity of the metal.

In thermodynamics, the specific heat capacity (symbol c) of a substance is the heat capacity of a sample of the substance divided by the mass of the sample, also sometimes referred to as massic heat capacity.

Informally, it is the amount of heat that must be added to one unit of mass of the substance in order to cause an increase of one unit in temperature.

Cp of metal× Mass of metal*(initial temperature-final temperature)=Cp of water× Mass of water×(final temperature - initial temperature)

Cp of metal×14.9×(98–28.5)=Cp of water×75×(28.5–20)

Cp of metal×14.9×(98–28.5)=Cp of water×75×(28.5–20)

Cp of metal =66.35 joule/Kg °C.

Therefore, 66.35 joule/Kg °C is the specific heat capacity of the metal.

To know more about specific heat capacity, here:

https://brainly.com/question/29766819

#SPJ1

In one mole of Mg(OH)2, there are 2 moles of OH. Therefore, in 1.20 moles of Mg(OH)2, there are: 2 moles of OH/mol of Mg(OH)2 x 1.20 mol of Mg(OH)2 = 2.4 moles of OH.

Mole measures the quantity of chemicals, whereas molarity measures the concentration of those substances. The amount of chemicals in a combination can be estimated by looking at its molarity. One volume of a solvent is equal to the number of moles of a material. Molarity is not a unit, although a mole is.

Molarity (M) is calculated by dividing the volume of the solution (V) in litres by the number of moles of solute (n). Not moles of solute per litre of solvent, but rather moles of solute per litre of solution, is a crucial distinction to make when defining molarity.

To know more about mole visit:-

https://brainly.com/question/20486415?

#SPJ1

The chemical formula for magnesium perchlorate is Mg(ClO4)2, which contains 1 magnesium atom (Mg), 2 chlorine atoms (Cl), and 8 oxygen atoms (O).

To calculate the number of moles of each element in 4.20 moles of Mg(ClO4)2, we need to use the mole ratios from the chemical formula.

Moles of Mg:

In one mole of Mg(ClO4)2, there is one mole of Mg atoms. Therefore, in 4.20 moles of Mg(ClO4)2, there are 4.20 moles of Mg atoms.

Moles of Cl:

In one mole of Mg(ClO4)2, there are 2 moles of Cl atoms. Therefore, in 4.20 moles of Mg(ClO4)2, there are 2 x 4.20 = 8.40 moles of Cl atoms.

Moles of O:

In one mole of Mg(ClO4)2, there are 8 moles of O atoms. Therefore, in 4.20 moles of Mg(ClO4)2, there are 8 x 4.20 = 33.6 moles of O atoms.

So the number of moles of Mg, Cl, and O atoms in 4.20 moles of Mg(ClO4)2 are: 4.20, 8.40, and 33.6, respectively.

Answer:

Explanation:

7.50 mol Mg

(ClO4)2

contains:

7.50 mol Mg atoms

15.0 mol Cl atoms

60.0 mol O atoms

1 mol Mg(ClO4)2

contains

1 mol Mg atoms, 2 mol Cl atoms, and 8 mol O atoms.

In terms of the quantity of a reactant that is reduced or the amount of such a product that is increased per unit time, the reaction's activation energy is 89.2 kJ/mol.

resistance in opposition to a power, influence, or movement is a reaction, a reactionary act, or an instance of a reactionary act. Particularly: a propensity for an old, typically antiquated political or social structure or policy; a reaction to a given treatment, circumstance, or stimulus. She received the news in shock.

Changes in color, temperature, gas generation, or precipitant formation are common during chemical reactions. Examples of commonplace processes include digestion, combustion, or cooking.

To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ1

Answer:

The Order of reaction refers to the relationship between the rate of a chemical reaction and the concentration of the species taking part in it.

In a structural formula all types of bonds can be represented. A single bond is indicated by a dash, double dash for double bonds and triple dash for triple bonds.

A structural formula consists of symbols for the atoms which are connected by the short lines called chemical bonds. It represents how the atoms are arranged in a molecular formula of the chemical compound.

The structural formula of the compounds are:

1. HCl - H - Cl

2. SeI₂ -  I - Se - I

3. CO₂ - O = C = O

The structural formula of NH₃ and CCl₄ is given below.

To know more about structural formula, visit;

https://brainly.com/question/29154542

#SPJ1

IV. Acetylene is a hydrocarbon molecule composed of two carbon atoms and two hydrogen atoms. It is a flammable gas, and when ignited with a spark, it produces an extremely hot flame.

Molecule is a unit of matter composed of two or more atoms bonded together. Atoms are the basic building blocks of all matter, and molecules are collections of atoms. Molecules can range in size from diatomic molecules composed of two atoms, to large macromolecules made up of hundreds of atoms. Molecules can vary in shape and complexity, and can consist of a variety of different elements. Molecules can be found in all physical states, including solids, liquids, and gases.

Ethylene is a hydrocarbon molecule composed of two carbon atoms and four hydrogen atoms. It is a gas with a sweet odor and is found naturally in plants, fruits, and vegetables.

I.

a. Cr2O3 (Chromium (III) oxide);

b. NH4H2PO4 (Ammonium dihydrogen phosphate);

c. CaSO4 (Calcium sulfate).

II.

a. Iron(II) Chloride

b. Barium Hydroxide

c. Lithium Cyanide

d. Lead(II) Chloride

To learn more about molecule

https://brainly.com/question/26388921

#SPJ1

the major species ultimate concentrations of AgCl+2NH 3[Ag(NH 3) 2] + +Cl − K=K 1​ K two =1.7×10 7 ×1.85×10 −10 =0.31×10 −2.

Na+, Ag+, Cl-, & NO3- are present in the solution as a result, however AgCl is not water soluble. Cl- and Ag+ are currently dissolved together, and as a result, AgCl will precipitate out of solution after the two have combined to create AgCl.

In order to help with mercury elimination, silver chloride has indeed been employed as an antidote to mercury poisoning. a component of several personal deodorant products that acts as an antibacterial agent. to keep drinking water in tanks clean and safe for a long time.

To know more about AgCl visit:

https://brainly.com/question/17102479

#SPJ1

When 84 grams of MgCO3 decompose, 40.166 grams of MgO will be formed.

What is Decomposition Reaction?

A chemical process known as a decomposition reaction occurs when a single component splits into two or more simpler compounds. It is the opposite of a synthesis reaction, to put it another way.Decomposition reactions occur when a compound is exposed to energy in the form of heat, light, or electricity, or when it reacts with another substance.

The balanced chemical equation for the decomposition of magnesium carbonate (MgCO3) is:

MgCO3 → MgO + CO2

From the equation, we can see that 1 mole of MgCO3 produces 1 mole of MgO. We need to find the number of moles of MgCO3 in 84 grams of the compound:

n(MgCO3) = m/M = 84 g / 84.3139 g/mol = 0.996 mol

Therefore, we can expect 0.996 moles of MgO to form as well. To find the mass of MgO, we can use its molar mass:

m(MgO) = n(MgO) * M(MgO) = 0.996 mol * 40.3044 g/mol = 40.166 g

So, when 84 grams of MgCO3 decompose, 40.166 grams of MgO will be formed.

Learn more about Decomposition Reaction from given link

https://brainly.com/question/27300160

#SPJ1

To calculate the mass of 2.20 x 10^22 formula units of NaOH, we first need to find the number of moles of NaOH using Avogadro's number (6.02 x 10^23):

Number of moles of NaOH = (2.20 x 10^22 formula units) / (6.02 x 10^23 formula units/mol)

Number of moles of NaOH = 0.0365 mol

Next, we can use the molar mass of NaOH (40.0 g/mol) to convert the number of moles to mass:

Mass of NaOH = (0.0365 mol) x (40.0 g/mol)

Mass of NaOH = 1.46 g

Therefore, the mass of 2.20 x 10^22 formula units of NaOH is 1.46 grams (rounded to three significant figures).

Answer:

B. trough to trough is NOT an accurate way to measure wavelength.

Explanation:

The correct way to measure wavelength is from crest to crest or from trough to trough, as these are the points of maximum displacement in the wave. Alternatively, one could measure from a point halfway between two crests (or two troughs) to another point halfway between the next two crests (or troughs), which is known as half crest to half crest measurement.

The accurate ways to measure the wavelength of a wave are between two crests (crest to crest), two troughs (trough to trough), or half crest to another half crest. Measuring from a crest to a trough gives half the wavelength. Therefore, option A (crest to trough) is not an accurate way to measure wavelength.

In the context of wave physics, the accurate ways to measure the wavelength of a wave are between two successive crests (crest to crest), or two troughs (trough to trough). The measurement from a half crest to another half crest is also valid, as it essentially represents the same distance as from crest to crest or trough to trough. However, measuring from a crest to a trough does NOT give you the wavelength, but instead it gives you half the wavelength because a complete wave cycle is from crest to crest or trough to trough. Therefore, option A (crest to trough) is NOT an accurate way to measure wavelength.

https://brainly.com/question/32677714

#SPJ2

Answer:

The mass of 0.25 moles of calcium sulfate is 34.035 grams

Explanation:

mass=number of moles × molar mass

= 0.25 × 134.14 g/ml

= 34.035g

Answer:

C. 18 amu

Explanation:

The atomic mass can be defined as the mass of neutrons and protons in the atom.

Atomic mass of oxygen = 10 + 8 = 18 amu

The initial 50.0 ml solution had a 0.0765 M [tex]NH_{3}[/tex] concentration.

The amount of solute contained in a specific amount of solution is the substance's concentration. The quantity of moles per solution in 1 L of solution, or molarity, is used to represent concentrations.

The balanced chemical equation is :

[tex]NH_{3} +HCl[/tex] →  [tex]NH_{4} Cl[/tex]

moles of [tex]NH_{3}[/tex] = moles of HCl

To fond moles of HCl :

moles of HCl = concentration of HCl  * volume of HCl used

moles of HCl = 0.10 M * 0.003825

To find the concentration of [tex]NH_{3}[/tex] in the original solution is :

concentration of [tex]NH_{3}[/tex] = moles of [tex]NH_{3}[/tex] / volume of solution

concentration of [tex]NH_{3}[/tex] = 0.003825 mol / 0.050 L

concentration of [tex]NH_{3}[/tex] = 0.0765 M

Therefore, the concentration of [tex]NH_{3}[/tex]  in the original 50.0 ml solution is 0.0765 M.

To know more about concentration visit:

https://brainly.com/question/10725862

#SPJ1

The carbonyl stretching vibration of guanine is expected to give rise to a peak in the vibrational-Raman spectrum at a wavenumber of around 1660-1700 cm^-1.

How to explain the information

The specific location of the peak can be affected by a variety of factors, including the excitation wavelength, the sample preparation method, and the environment in which the sample is analyzed.

If the 514.5 nm line of an argon ion laser is used as the incident light source, the Raman shift associated with the carbonyl stretching vibration of guanine would be expected to be in the range of 620-670 cm^-1. However, it's important to note that the exact position of the peak may vary depending on the specific experimental conditions.

An overview was given as the information is incomplete.

Learn more about carbonyl on:

https://brainly.com/question/13564853

#SPJ1

That is equivalent to 1.1 grams of ammonium hydroxide per gram of water if the solubility at 60 ° C is 110 grams of potassium chloride for every 100 gram of water.

The physiological actions of nitrate, which are comparable to those of NO, include lowering blood pressure, preventing platelet aggregation, and providing a protective impact on blood vessels.

Its monikers include nitrate of potash, nitre, and saltpeter (saltpetre). In addition to various different forms of pyrotechnics, it is used to make nitric acid and fuel for model rockets. It serves as both a fertilizer and a food preservative.

To know more about Nitrate visit:

https://brainly.com/question/5346392

#SPJ1

Answer:

The solubility of KNO3 is approximately 110 g/100 mL

Explanation:

here is a proper explanation

The balanced chemical equation for KClO3 decomposition is: 2KClO3(s) → 2KCl(s) + 3O2(g). 0.061 moles of KClO3 reacted. Rounded to 3 significant figures, the answer is 0.0610 moles of KClO3.

How many moles of KClO3 reacted?

The balanced chemical equation for KClO3 decomposition is:

2KClO3(s) → 2KCl(s) + 3O2(g)

According to the equation, for every 3 moles of O2 produced, 2 moles of KClO3 react. Therefore, the number of moles of KClO3 can be calculated as:

moles of KClO3 = (2/3) × moles of O2

To find the moles of O2 produced, we need to use the molar mass of O2, which is 32 g/mol. As a result, the number of moles of O2 is:

moles of O2 = mass of(O2) / molar mass(O2)

moles of O2 = 2.94 g / 32 g/mol

moles of O2 = 0.092 mol

Now we can calculate the moles of KClO3:

moles of KClO3 = (2/3) × moles of O2

moles of KClO3 = (2/3) × 0.092 mol

moles of KClO3 = 0.061 mol

Therefore, 0.061 moles of KClO3 reacted. Rounded to 3 significant figures, the answer is 0.0610 moles of KClO3.

To learn more about chemical equation, visit: https://brainly.com/question/29886207

#SPJ1

Answer: Your welcome!

Explanation:

(a) The amount of oxygen gas required to react with 7.98 liters of hydrogen gas at STP in the synthesis of water is 7.98 liters. This is because the balanced chemical equation for the synthesis of water is 2H2 + O2 → 2H2O. Since the moles of hydrogen gas are equal to the moles of oxygen gas, the volume of oxygen gas required would be equal to the volume of hydrogen gas.

(b) The mass of water produced by the reaction is equal to the mass of hydrogen gas (2 x 1.00794 g/mol) plus the mass of oxygen gas (16.00 g/mol) multiplied by the molar ratio of hydrogen gas to oxygen gas (2:1). This gives us a total mass of 18.01588 g.

The spring constant if 125J of energy is stored when a spring is compressed 0.300m is option A which is 2780N/m

The potential energy stored in a spring is given by the formula:

PE = (1/2) k x^2

where PE is the potential energy, k is the spring constant, and x is the displacement of the spring from its equilibrium position.

We can use this formula to find the spring constant if we know the potential energy stored and the displacement of the spring:

PE = (1/2) k x^2

Rearranging the formula gives:

k = 2PE / x^2

Substituting the given values into the formula gives:

k = 2(125 J) / (0.300 m)^2

k = 2780 N/m

Therefore, the spring constant is 2780 N/m.

Learn more about spring constant below.

https://brainly.com/question/14670501

#SPJ1

the answer is

volume = 1.16L