Answers
First if you have a data sheet you would compare the four peaks that are denoted by a,b,c and d and see if the number in which the peak falls alligns with a bond type present in the moecule. IR spectroscopy is used quite alot in organc chemistry so using my data sheet I'd assume that;
Peak D, likely represents a C-O bond (found in wavenumer range 1000-1300)
Peak C, likely represents a C-H bending vibrations (with wavenumber range 1400-1500)
Peak B, is likely a C=C bond, (with wavenumber range of 1620-1680
Peak A, is likely a C=O bond, (with wavenumber range of 1680-1750)
From here you could predict some possible molecules that the IR spectrum alligns with ie any molecules that are composed of C-H, C-O, C=O and C=C bonds, like an ester with an unsaturated carbon chain.
Related Questions
Binary molecules have
A) multiple (2+) or many elements bonded ionically & covalently.
B) 2 elements ionically bonded.
C) 2 elements covalently bonded.
D) 1 element covalently bonded.
Answers
Answer:
C
Explanation:
It is formed as a result of a reaction between two non-metals
How much heat does your body lose when 6.35 g of sweat evaporates from your skin at 25 ∘C ? (Assume that the sweat is only water.) The heat of vaporization of water at 25 ∘C is 44.0 kJ/mol .
Answers
Answer:
15.52 kj
Explanation:
H2 O mole wt ~ 18 gm
6.35 gm is 6.35 gm /18 gm/mole = .353 moles of H2O
.353 moles * 44 kj/mole =
1) Sodium hydroxide is deliquescent. A sample of 3.0 g was dissolved in 100 mL; 10 mL was titrated with 34.9 mL HCl 0.2 M. What is the percent of absorbed water in the sample?
Answers
From the calculation, the percentage of water in the sodium hydroxide sample is 7%.
What is neutralization?The term neutralization has to do with the reaction between an acid and a base to yiled salt and water.
Now we have to apply the titration formula;
CAVA/CBVB = NA/NB
CA = concentration of acid
CB = concentration of base
VA = volume of acid
VB = volume of base
NA = number of moles of acid
NB = number of moles of base
The reaction equation is; HCl + NaOH ----->NaCl + H2O
CAVANB = CBVBNA
CB = CAVANB /VBNA
CB = 34.9 * 0.2 M * 1/10 * 1
CB = 0.698 M
Number of moles = Conncentration * volume
= 0.698 M * 100/1000 L = 0.0698 moles
Mass = Number of moles * molar mass
Mass = 0.0698 moles * 40 g/mol = 2.79 g
percent of NaOH = 2.79 g/ 3g * 100/1 = 93%
Percent of water = 100- 93 = 7%
Learn more about neutralization: https://brainly.com/question/15395418
Which best describes the law
of conservation of mass?
• The coefficients in front of the chemicals in
the reactants should be based on the physical state of the products.
O Products in the form of gases are not considered a part of the total mass change from reactants to products.
• When reactants contain both a solid and a liquid, the solid counts toward the overall mass and the liquid does not.
• The mass of the reactants and products is
equal and is not dependent on the physical state of the
substances.
Mark this and retum
Save and Exit
Next
Submit
Answers
Answer:
The mass of the reactants and products is
equal and is not dependent on the physical state of the
substances.
state the difference between a conductor and an insulator.
[tex] \\ \\ \\ [/tex]
thankyou ~
Answers
[tex]\huge\mathbb\red{HEY \: THERE♡}[/tex]
A conductor allows current to flow easily through it. An Insulator doesn't allow current to flow through it. Electric charge exists on the surface of conductors. Electric charges are absent in insulators.
[tex]\huge\mathbb\orange{HOPE \: IT \: HELPS♤}[/tex]
Bonding with intermolecular forces:
1.) is CH3OH a hydrogen bonding? yes or no?
2.) is CH3OH dipole-dipole interactions? Yes or no?
3.) is CH3OH a london dispersion forces? Yes or no?
Answers
Answer:
its Methanol
Explanation:
1). Yes, CH3OH can form bonds (hydrogen bonds) with other CH3OH molecules.
2).Yes
3).Yes, it is a type of interaction created between non polar molecules.
Calculate the mass, in grams, of 532.0 atoms of cadmium, (1 mol of Cd has a mass of 112.41g)
Answers
1.0 mol of any substance = 6.022 × 10^23 atoms of that substance
Molar mass = 112.41 g
Number of atoms = 532.0 atoms
Since we know
6.022 × 10^23 atoms of Cd = 112.41 g of Cd
So
532 atoms of Cd = (112.41×532)/(6.022×10^23) g of Cd = 9.93×10^-20g of Cd
Therefore, the mass of 532.0 atoms of cadmium is 9.93×10^-20 grams
What is the molar mass of K₂CO₃?
Answers
Answer:
138g/mol
Explanation:
K₂CO₃ is also known as potassium carbonate. It has a molar mass of around 138.21 g/mol (138.2055 g/mol to be exact).
Your mom buys you a helium balloon at the circus. It has a volume of 4.00 liters at STP. What mass of helium (He), expressed in grams, does this balloon contain?
Answers
Answer:
2.8 g
Explanation:im not 100%
According to ideal gas equation and STP conditions, mass of helium is 7.04×10[tex]^-2[/tex] g.
What is ideal gas equation?The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.The law has been proposed by Paul Emile Clapeyron, a physicist and an engineer in 1834.The law is applicable to only ideal gases at all temperature and pressure.
In the given problem, pressure= 1 atmosphere , volume=4 liters, molar mass= 4 g/mole ,R=8.314 , T= 273 K.
mass= PV×molar mass/RT=1×4×4/8.314×273=16/2269.722=7.04×10[tex]^-2[/tex] g.
Thus, the mass of helium gas is 7.04×10[tex]^-2[/tex] g.
Learn more about ideal gas equation,here:
https://brainly.com/question/28837405
#SPJ2
A constant volume of oxygen is heated from 100oC to 185 oC. The initial pressure is 4.1 atm. What is the final pressure?
Answers
A constant volume of oxygen has a pressure of 4.1 atm at 100 °C and 5.0 atm at 185 °C according to Gay-Lussac's law.
What does Gay-Lussac's law state?At constant volume, the pressure of an ideal gas is proportional to its absolute temperature.
Step 1: Convert the temperatures to the absolute scale.We will do so by adding 273.15 to the Celsius temperature.
T₁: 100 °C + 273.15 = 373 K
T₂: 185 °C + 273.15 = 458 K
Step 2: Calculate the final pressure of the gas.We will apply Gay-Lussac's law.
P₁/T₁ = P₂/T₂
P₂ = P₁ × T₂/T₁
P₂ = 4.1 atm × 458 K/373 K = 5.0 atm
A constant volume of oxygen has a pressure of 4.1 atm at 100 °C and 5.0 atm at 185 °C according to Gay-Lussac's law.
Learn more about Gay-Lussac's law here:
https://brainly.com/question/24691513
#SPJ1
When magnesium is added to hydrochloric acid it reacts violently. If 87.0g of magnesium is used during this reaction how much magnesium chloride is produced?
Answers
Answer:
Magnesium hydroxide is a base. Hydrochloric acid, as the name suggests, is an acid.
So an acid and a base together will produce salt and water. In this case, the salt is magnesium chloride.
This process is known as neutralisation
23) A common reaction that occurs in cells is shown here. In the presence of oxygen, a glucose molecule is combusted to form carbon dioxide and water. If 360 grams of glucose are combusted fully,
calculate how many moles of oxygen gas will be needed to achieve this reaction.
A) 2
B) 8
C)12
D) 18
Answers
Answer:
C
Explanation:
add them together and multiply by 2
A 0.30 M solution of formic acid, HCHO 2, is 2.4% ionized. The ionization constant for formic acid is O a. 1.7 X 10-4 O b.7.2 x 10-3 O C.24 X 10-2 O d. 1.6 X 10-5
Answers
Answer:
help me remove all the scammers on brainly by not clicking on such random scam links
What is the standard enthalpy change for the reaction:
3NO2(g)+H2O(l)→2HNO3(aq)+NO(g)
Use standard enthalpies of formation in your textbook.
Select one:
a.
-66.2 kJ
b.
-138 kJ
c.
-116 kJ
d.
-201 kJ
Answers
What is the formula of this
inorganic salt hydrate?
Answers
Salt hydrates are an important class of PCMs. An inorganic salt hydrate (hydrated salt or hydrate) is an ionic compound in which the ions attract a number of water molecules, which are then trapped inside the crystal lattice. A hydrated salt has the generic formula MxNy. nH2O.
Consider these reactions:
Reaction 1: H2(g) + Cla (g)
2HC1(g) AH = -184.6 kJ
Reaction 2: 20F2(g)
02(g) + 2 F2(g)
AH = -49.4 kJ
Reaction 3: N2(g) + 202(g)
2N02(g)
AH = +66.4 kJ
Use Reaction 1.
Determine the mass, in grams, of chlorine gas consumed (with excess H-) when
1,342.0 kJ of energy iS released from the system.
Answer: g
Answers
511.2 grams of chlorine gas consumed (with excess H-) when
1,342.0 kJ of energy is released from the system.
What is an exothermic reaction?In thermochemistry, an exothermic reaction is a "reaction for which the overall standard enthalpy change ΔH⚬ is negative."
Given that 1 mole of chlorine releases -184.6 energy.
Then, we have to find the number of moles of chlorine when 1,342.0 kJ of energy is released from the system.
So, calculating number of moles of chlorine.
Moles = [tex]\frac{-1,342.0 \;kJ}{-184.6\;kJ}[/tex]
Moles = 7.2 mole
Now, calculating number mass of chlorine.
[tex]\rm Moles=\rm\frac{Mass}{Molar \;mass}[/tex]
Mass = 7.2 mole x 71 g/mole
Mass = 511.2 gram
Learn more about exothermic reaction here:
https://brainly.com/question/10373907
#SPJ1
A container holds 6.4 moles of gas. Hydrogen gas makes up 25% of the total moles in the container. If the
total pressure is 1.24 atm. What is the partial pressure of hydrogen? Must show work! Use P^a/P^t = n^a/n^t
Answers
Answer:
i let alone need more time to figure this out and i will get you the awnser.
Explanation:
7. In the process of assembling bicycles, you have 114 frames, 300 tires, 75 seats, 109 sets of pedals, and 84 sets of handlebars. Which is the limiting reactant in this process?
a. frames
c. seats
e. handlebars
b. tires
d. pedals
Answers
In the bicycle assembling process, the limiting reactant is seats since they will be used up first.
What is a limiting reactant?A limiting reactant is a reactant which is used up first in a reaction and on which product formation depends on.
In a given reaction, once the limiting reactant is used up, the reaction will stop.
For a bicycle to be assembled, 1 frame, 1 seat, 1 seat of handlebars, 1 seat of pedals and 2 tires are required.
In the process of assembling bicycles, there are 114 frames, 300 tires, 75 seats, 109 sets of pedals, and 84 sets of handlebars.
Therefore, the limiting reactant is seats since they will be used up first.
Learn more about limiting reactant at: https://brainly.com/question/14225536
#SPJ1
A chamber contains equal molar amounts of CO, CO2, N2, and O2. If the total chamber pressure is 3.00 atm, then the partial pressure of CO2 is
Answers
Answer:
[tex]P_{CO_2} = 0.75 atm[/tex]
Explanation:
[tex]P_{total} = P_{CO} + P_{CO_2} + P_{N_2} + P_{O_2}[/tex]
Since there's equal molar amounts we can conclude that
[tex]P_{CO_2} = P_{CO} = P_{N_2} = P_{O_2}[/tex]
So,
[tex]P_{total} = 4P_{CO_2}\\3.00 atm = 4P_{CO_2}\\P_{CO_2} = \frac{3.00 atm}{4} = 0.75 atm[/tex]
(image attached) AP CHEM ACID BASE Is my answer correct? I will mark as brainliest if you answer me. I don't need an explanation if i'm right just explain if i'm wrong. Thanks
Answers
Answer:
Your answer is correct based on what I remember from AP Chemistry
Explanation:
is Al+CuCl2 a spontaneous reaction?
Answers
Answer:
No, it isn't a spontaneous reaction.
Explanation:
A spontaneous reaction is a reaction that requires no outside intervention to start.
All chemical reactions require energy.
mark brainliest please!
Which is NOT a disadvantage of using electromagnetism?
A.) cause cancer
B.) damage medical equipment
C.) accurate viewing of soft tissue in the body
D.) heat up quickly
Answers
Answer:
Electromagnetism can cause cancer
So option A is incorrect
Electromagnetism can damage a medical instruments
It is also a disadvantage and this option is not correct
Now come to C it says that electromagnetic is used to veiw the soft tissue it is not a disadvantage but a advantage so C IS THE CORRECT ANSWER
Explanation:
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE
which molecule has zero polarity
Answers
Answer:
Carbon dioxide
Explanation:
The oxygen atoms are more electronegative than the carbon atom, so there are two individual dipoles pointing outward from the C atom to each O atom. However, since the dipoles are of equal strength and are oriented this way, they cancel out and the overall molecular polarity of CO 2 is zero.
Answer:
CO2 has zero polarity
hope this helps:)
APP
Questions
Show all calculations and proper units to earn full marks
1.
Determine the identity of element X in the following nuclear reaction
atomic mass
a) 23°U → He + x
9202 atomic num
b) x
He + 282Pb
206
23go
c)
244 Cm + He
He
&X + 1H + 2an
96
d)
-
23U + x
BU
→ 2450f + 4 ón
Cf
98
10
257Lr + 5 on
+ 1.B →
el ?x
->
103
Answers
Answer:
Explanation:
This question is about nuclear reactions. (a) (i) Define the term unified atomic mass unit. [1]. 1/12th mass of an atom of carbon-12.
The nuclear reaction can be written as: Mg2512+He42→H11+XAZ. where. A is the mass number and; Z is the atomic number of the new nuclide, X.
The mass defect for an isotope was found to be 0.410 amu/atom. Calculate the binding energy in kJ/mol of atoms. (1 J = 1 kg m2/s2): (a) 3.69 x 1010
what as the cause of wrld war 2?
Answers
Answer:
because peoples don't has so mu thinking power that time[tex]\bold{Heya!}[/tex]
Wowie- nice cat... plus, he or she is fluffy...
Have a great day!
#LearnWithBrainly
[tex]\underline{Answer :}[/tex]
XxVioletXx
H₂O Is water but what type?
Answers
Answer: H₂O is just water
Explanation:
Answer:
h2o is a water which is a clear, colorless, odorless, tasteless liquid that freezes into ice below 0°C and boils above 100°C.
What units are carbon emissions measured in?
Answers
Answer:
GHG emissions are often measured in carbon dioxide (CO2) equivalent. To convert emissions of a gas into CO2 equivalent, its emissions are multiplied by the gas's Global Warming Potential (GWP).
Question 5 of 5
Which term refers to the average kinetic energy of the particles in a sample of
matter?
OA. Temperature
OB. Potential energy
OC. Heat
OD. Thermal energy
SUBMIT.
Can you pls anwser as soon as u can
Answers
Answer:
Tempreture should be the correct answer!!
Explanation:
hope this helps ya!!
d. How many molecules of CO2 are produced from 62.4 g
of C10H18
Answers
The number of molecules of CO₂ produced from 62.4 g of C₁₀H₁₈ is equal to 27.099×10²³.
What is Avogadro's number?Avogadro's number is define as the number of entities present in one mole of any susbtance and it willl be equal to 6.022×10²³.
Moles (n) from mass will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction will be represented as:
C₁₀H₁₈ + 29/2O₂ → 10CO₂ + 9H₂O
Moles of C₁₀H₁₈ = 62.4g / 138.25g/mol = 0.45 moles
From the stoichiometry of the reaction,
0.45 mole of C₁₀H₁₈ = produces 10×0.45 = 4.5 moles of CO₂
By using the avogadro's formula, molecules of CO₂ will be calculated as:
Molecules of CO₂ in 4.5mol = 4.5 × (6.022×10²³) = 27.099×10²³
Hence required molecules of CO₂ is 27.099×10²³.
To know more about avogadro's number, visit the below link:
https://brainly.com/question/1581342
#SPJ1
Correctly predict the ionic compound that would form between the atoms rubidium (Rb) and oxygen (O).
Answers
Answer:
Rb2O
Explanation:
Rb is a 1+ element and Oxygen is a 2- element. To have a neutral overall charge you must change the molar ratio to have 2 (1+ elements) and 1 (2- element). Together add to 2+(-2)=0. So the overall product is neutral.