Household ammonia has a label that claims it is 7-10% NH3 by volume and that it “cleans, degreases, and removes stains [with] hundreds of other uses”. The substance is an aqueous solution of ammonium hydroxide with a molarity of approximately 2.3 M. Which of the following statements is true regarding this solution?

1) Water is the solvent of the solution.

2)Ammonium hydroxide is the solute of the solution, water is the solvent of the solution, & the concentration of the solution is 2.3 M are all true.

3) Ammonium hydroxide is the solute of the solution & water is the solvent of the solution are true

4) Ammonium hydroxide is the solute of the solution.

5) The concentration of the solution is 2.3 M.

The percentage abundance of 235U is 0.720%, and the percentage abundance of 238U is 99.274%, given that the percentage abundance of 234U is 0.006%. These values can be calculated by subtracting the percentage abundance of 234U from 100.

Uranium is important in nuclear energy because it is a naturally occurring radioactive element that can undergo nuclear fission, which releases a significant amount of energy. Nuclear power facilities can use this energy to produce electricity.

Uranium mining can pose a variety of environmental and health risks. The mining process can generate large amounts of waste rock and tailings that can contaminate soil and water with radioactive materials. Exposure to these materials can increase the risk of cancer and other health problems.

Additionally, the transport and storage of uranium can pose a risk of accidental release, which can have significant environmental and health impacts.

To know more about uranium,visit:

https://brainly.com/question/31187694

#SPJ1

The balanced chemical equation for the reaction between butane and oxygen to form carbon dioxide and water is shown below.2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(g)We need to calculate the theoretical yield of water formed from the reaction of 2.91 g of butane and 13.5 g of oxygen gas.

To do this, we need to determine which of the two reactants is limiting and then use stoichiometry to calculate the amount of water produced. Butane reacts with oxygen in a ratio of 2:13. Therefore, to calculate the amount of oxygen needed to react with 2.91 g of butane, we use the following calculation: moles of butane = mass / molar mass = 2.91 g / 58.12 g/mol = 0.05 mol The moles of oxygen required = 0.05 mol × (13 mol of O2 / 2 mol of butane) = 0.325 mol So, the limiting reactant is oxygen because there is less of it than required. Using the stoichiometric ratio of the balanced chemical equation, we know that 10 mol of water is produced for every 13 mol of oxygen consumed.

Therefore, the number of moles of water produced can be calculated as follows: number of moles of water = 0.325 mol × (10 mol of H2O / 13 mol of O2) = 0.25 mol The mass of water produced can be calculated using its molar mass: mass of water = number of moles × molar mass = 0.25 mol × 18.02 g/mol = 4.505 g The theoretical yield of water formed from the reaction of 2.91 g of butane and 13.5 g of oxygen gas is 4.505 g of water.

Learn more about theoretical yield of water formed in reaction at: brainly.com/question/18566253

SPJ11

The molecular formula of the compound is [tex]NH_4[/tex] ammonium.

The empirical formula is the simplest ratio of atoms of each element in a compound, expressed as a whole number. To determine the molecular formula, we need to multiply the number of atoms in the empirical formula by the molar mass of the compound.In this case, the empirical formula is [tex]NH_2[/tex], meaning that there is one nitrogen and two hydrogen atoms. The chemical has a 32 g/mol molar mass.Therefore, if we multiply the number of atoms in the empirical formula by 32 g/mol, we will get the molecular formula, which is [tex]NH_4[/tex], meaning that there are four nitrogen and eight hydrogen atoms.

Learn more about molar mass Refer:brainly.com/question/30216315

#SPJ1

Gas particles are constantly moving quickly and randomly. Elastic collisions occur when gas particles collide with one another and with the container walls.

According to the kinetic molecular theory, gas particle collisions are completely elastic. When two objects collide in an elastic collision, their combined kinetic energy is preserved during the collision.

According to the kinetic molecular theory, collisions between gas particles occur in perfect elastic motion and are always in motion. Boyle's and Charles's laws can both be explained by the kinetic molecular theory.

To know more about Elastic collisions visit:-

brainly.com/question/2288184

#SPJ1

The following statements are true or false:

A- To rinse the entire inner surface of the buret, one should add water from a wash bottle while rotating the buret. - True

B- Rinsing the buret with water is always enough to clean the buret. - False

C- To clean the inner surface of the buret, one should wash it with soapy water three times. - False

D- After rinsing with water and soapy water solution, one can add the titrating solution and begin the titration. - True

E- Always rinse a buret with the titration solution three times before beginning a titration. - False

To rinse the entire inner surface of the buret, one should add water from a wash bottle while rotating the buret. After using the buret, it is essential to clean it by rinsing it thoroughly. To do this, add water to the buret with a wash bottle while rotating it. This ensures that the whole inner surface of the buret is rinsed, which eliminates any residual substances.

Rinsing the buret with water is not always enough to clean the buret. While rinsing the buret with water is a crucial step in cleaning it, it is not always sufficient. Burets must be washed with soapy water to ensure that they are clean.

To clean the inner surface of the buret, one should not wash it with soapy water three times. Rather, the buret should be washed with soapy water once. The buret should be washed with a mild soap solution and then rinsed with water.

After rinsing with water and a soapy water solution, one can add the titrating solution and begin the titration. After cleaning the buret, the next step is to fill it with the titrating solution and begin the titration process.

One should not always rinse a buret with the titration solution three times before beginning a titration. After cleaning the buret, it should be rinsed thoroughly with water and not the titration solution. The titration solution should be added only when the buret is clean and ready for use.

To know more about titration refer here:

https://brainly.com/question/29312456#

#SPJ11

P stands for pressure and is 1.89 103 kPa. This is equivalent to 1.89 x 10310.325 x 18.65 atm.

Thus, the value of $gamma $ is 1.664 for molecular formula gas such the precious gases He, Ne, or Ar and = 1.4 for diatomic gases, etc. The number of moles is n, while R is really the gas standard. As a result, 0.7L of 5.6L of argon gas at the STP is obtained by adiabatic compression.

An molecule of something like the chlorine atom helium as known as a helium atom. Hydrogen is made up of two electrons connected either by electromagnetism toward a structure comprising two protons and either one or 2 particles, based on the isotope, bound together through a strong force.

To know more about equivalent visit:

https://brainly.com/question/29999744

#SPJ1

When X, which contains both lactone and acetal, is treated with the reagent H3O+, it forms two products.

These products differ in molecular mass. The products are as follows:

Product 1: The first product is a cyclic hemiacetal. The acetal and lactone are both converted to hemiacetals, which are stable under acidic conditions. The formation of hemiacetal can be depicted using the following reaction: X + H3O+→ Hemiacetal This product is of lower molecular mass than X.

Product 2: The second product is an open-chain hemiacetal. The acetal and lactone are both converted to hemiacetals, which are stable under acidic conditions. The open-chain form of hemiacetal is more stable than the cyclic form, and it is therefore preferred. The formation of hemiacetal can be depicted using the following reaction: X + H3O+→ HemiacetalThis product is of higher molecular mass than X.

#SPJ11

For more information on lactone : https://brainly.com/question/29438490

The halogen family is a group of non-metallic elements located in group 17 or 7A of the periodic table. Some of the characteristics of the halogen family include:

They have a high electronegativity, meaning they tend to attract electrons towards themselves in chemical bonding.

They have a high electron affinity, meaning they tend to gain electrons in chemical reactions.

They are highly reactive and tend to form compounds with other elements, especially metals.

They exist in all three states of matter at room temperature, depending on the element. For example, fluorine and chlorine are gases, bromine is a liquid, and iodine is a solid.

They are diatomic molecules in their elemental form, meaning they exist as two atoms of the same element bonded together. For example, chlorine gas (Cl2) and fluorine gas (F2).

One characteristic that is not true of the halogen family is that they are good conductors of heat and electricity. In fact, they are poor conductors of heat and electricity, which is a common characteristic of non-metallic elements. Halogens are also not typically used as structural materials, as they tend to be brittle and have low melting and boiling points compared to metals.

To know more about halogen family, visit: brainly.com/question/13040817

#SPJ4

Answer:

I suppose it's 4Fe + 3O2 + 6H2O → 4Fe(OH)3

Explanation:

Iron needs both water and oxygen to oxidise and rust

1804.7 g of water is needed achieve 4.24% mass fraction.

To make a solution with a mass fraction of 4.24 %, we need to dissolve 76.4 g of the solute in an appropriate amount of water.

To calculate the amount of water needed, use the following equation:

Mass fraction (%) = (Mass of solute / Mass of solution) x 100

Therefore, Mass of solution = (Mass of solute x 100) / Mass fraction (%)

Plugging in the given values,

we get: Mass of solution = (76.4 g x 100) / 4.24 = 1801.88 g

This means that 1804.7 g of water is needed to make a solution with a 4.24% mass fraction, using 76.4 g of the solute.

Learn more about mass fraction of CH₃COOH : https://brainly.com/question/30993253

#SPJ11

Compound x can be identified as a ketone containing a carbonyl group,

Let's start by breaking down the reaction:

Compound x (ketone) + 2 thioacetal + acid → thioacetal (product)

Thioacetal (product) + Raney nickel → diphenylmethane

In the first step of the reaction, the ketone (compound x) reacts with two equivalents of thioacetal in the presence of an acid to form the thioacetal product.

The thioacetal product is then treated with Raney nickel in the second step to form diphenylmethane.

Based on the reaction, we can infer that the carbonyl group of a ketone is replaced by a thioacetal group (-S-CH2-) when it reacts with two equivalents of thioacetal in the presence of an acid. The resulting product then undergoes hydrogenation with Raney nickel to form diphenylmethane.

Therefore, Compound x can be identified as a ketone containing a carbonyl group, but without any other functional groups that may interfere with this reaction. Without additional information or data, it is impossible to identify the specific structure of Compound x.

To know more about ketone go through:-

https://brainly.com/question/24151172

#SPJ4

The entire amount of greenhouse gases (such as carbon dioxide and methane) produced by human actions is known as a carbon footprint. One of the highest rates in the world, the average carbon footprint of a person in the United States is 16 tonnes.

As we drive, heat our homes with oil or gas, consume fuel for transportation, or use electricity produced from coal, natural gas, or oil, we all emit greenhouse gases.

Described by the WHO as a weight of CO2, a carbon footprint is a measurement of the effect your actions have on the amount of carbon dioxide (CO2) created by the combustion of fossil fuels.

To know more about greenhouse gases visit:-

brainly.com/question/30908383

#SPJ1

Avogadro's Law is the notion that one mole of any gas has the same volume at STP (Standard Temperature and Pressure). identical volumes of gases at the same pressure and temperature have an identical number of molecules, according to Avogadro's Law.

This means that at STP, a mole of any gas will take up the same amount of space—22.4 liters—as another mole.

Avogadro's Law may therefore be used to determine the volume of hydrogen gas at STP, which is 22.4 liters for each mole. This is due to Avogadro's Law, which states that one mole of any gas at STP has the same number of particles (6.022 x 1023) and takes up the same amount of space (22.4 liters).

Avogadro's Law

A fundamental gas law called Avogadro's Law describes the correlation between a gas's volume and the number of particles it contains. identical volumes of gases at the same pressure and temperature have an identical number of molecules, according to this statement.

This indicates that one mole of any gas will have the same volume as 22.4 liters at standard temperature and pressure (STP), which is defined as 0°C (273.15 K) and 1 atmosphere (atm) of pressure. A mole, or 6.022 x 1023 particles, or Avogadro's number, is a unit of measurement that denotes a certain number of particles.

learn more about mole here

https://brainly.com/question/15356425

#SPJ1

In the experiment design in part I, the part that explains why the pattern changed to a constant relationship between the variables at higher values for mass of CuSO4 is the controlled variable.

The controlled variable is the variable that stays the same throughout the experiment. It is also known as a constant variable, and it is not allowed to change. This is done so that the effects of the independent variable on the dependent variable can be observed.

The other variables in the experiment are independent variables and dependent variables. The independent variable is the variable that is changed in the experiment. The dependent variable is the variable that is being measured. In the experiment, the independent variable is the mass of CuSO4. The dependent variable is the absorbance value. The controlled variable is the concentration of CuSO4, the volume of the CuSO4 solution, the type of the solution, the type of the cuvette, and the wavelength used.

By keeping the concentration, volume, solution type, cuvette type, and wavelength used constant, the effects of these variables on the absorbance value can be eliminated. Therefore, any changes in the absorbance value are only caused by the changes in the independent variable, which is the mass of CuSO4.

Learn more about variables: https://brainly.com/question/25223322

#SPJ11

Answer:

6.67%

Explanation:

% by mass of hydrogen = mass of hydrogen/ total mass of the compound × 100%

mass of hydrogen = 1 × 12

= 12 g

total mass of compound = 12×6 + 1×12 +16×6

= 180 g

Therefore, % by mass of hydrogen = 12/180 × 100%

= 6.67%

Answer:

bar graph

Explanation:

because of the fact that the data is shown in such a way that a line graph would not work, you need to graph the data for each individual time

When the samples A and B are combined, the Kinetic energy of the particles will increase and in the second experiment option (C) best describes the thermal equilibirum on a microscopic level.

Kinetic energy, which may be seen in the movement of an item or subatomic particle, is the energy of motion. Kinetic energy is present in every particle and moving object. Kinetic energy is a type of power that a moving object or particle possesses. An item accumulates kinetic energy when work, which involves the transfer of energy, is done on it by exerting a net force. A moving object or particle has kinetic energy, which depends on both its mass and its rate of motion. The type of motion can be vibration, rotation on an axis, translation (or travel along a path from one place to another), or any combination of these.

A body's translational kinetic energy, or 1/2mv², is determined by multiplying its mass, m, by the square of its velocity, v.

Know more about energy here:

https://brainly.com/question/1932868

#SPJ1

Answer:

When samples A and B were combined, the kinetic energy of the particles transferred from the particles with higher kinetic energy (from beaker A) to the particles with lower kinetic energy (from beaker B). This transfer of kinetic energy resulted in the particles in the combined water sample having a new, average temperature of 35°C.

Explanation :

The statement that best supports thermal equilibrium on a microscopic scale is: A. Beaker A has molecules of higher kinetic energy. These molecules collide with molecules from beaker B and transfer some of their energy. Energy is transferred until the average potential energy of the molecules from both samples are the same. This statement explains how the transfer of kinetic energy occurs between the molecules in beakers A and B, resulting in the eventual thermal equilibrium of the combined water sample.

for more such questions on kinetic energy

https://brainly.com/question/15438905

#SPJ11

To determine the sulfate ion concentration of the resulting solution, we first need to calculate the moles of sulfate ions in each solution, and then add them together.

For the CuSO4 solution:

moles of CuSO4 = concentration x volume in liters

moles of CuSO4 = 1.50 mol/L x 0.075 L

moles of CuSO4 = 0.1125 mol

Since there is 1 mole of sulfate ion for every mole of CuSO4, the moles of sulfate ion in the CuSO4 solution is also 0.1125 mol.

For the Co2(SO4)3 solution:

moles of Co2(SO4)3 = concentration x volume in liters

moles of Co2(SO4)3 = 1.00 mol/L x 0.050 L

moles of Co2(SO4)3 = 0.050 mol

Since there are 3 moles of sulfate ion for every mole of Co2(SO4)3, the moles of sulfate ion in the Co2(SO4)3 solution is 0.050 mol x 3 = 0.150 mol.

Now, we can add the moles of sulfate ions from each solution together to get the total moles of sulfate ions in the resulting solution:

total moles of sulfate ion = moles of CuSO4 + moles of Co2(SO4)3

total moles of sulfate ion = 0.1125 mol + 0.150 mol

total moles of sulfate ion = 0.2625 mol

To find the sulfate ion concentration of the resulting solution, we need to divide the total moles of sulfate ion by the total volume of the resulting solution, which is the sum of the volumes of the two solutions:

total volume = 75.0 mL + 50.0 mL

total volume = 125.0 mL or 0.125 L

sulfate ion concentration = total moles of sulfate ion / total volume

sulfate ion concentration = 0.2625 mol / 0.125 L

sulfate ion concentration = 2.10 mol/L

Therefore, the sulfate ion concentration of the resulting solution is 2.10 mol/L.

For more questions like sulfate concentration, visit the link below:

https://brainly.com/question/31214882

#SPJ11

Hydrogen can be used in fuel cells to generate electricity, or power and heat. Today, hydrogen is most commonly used in petroleum refining and fertilizer production, while transportation and utilities are emerging markets.

The final pressure, in atm, after 9.06 g of krypton reacts with 10.0 g of fluorine at 300 k in a 10.0-l container is 0.935 atm.

Given the mass of krypton gas = 9.06g

the mass of fluorine gas = 10g

The temperature of gas = 300K

The volume of container = 10L

Let the final pressure = P

The balanced chemical equation for the reaction of krypton with fluorine is: [tex]Kr + 2F2 -- > KrF2 + F2[/tex]

We know the Molar mass of krypton = 83.798 g/mol

We know the Molar mass of fluorine = 18.998 g/mol

Moles of krypton = 9.06 g / 83.798 g/mol = 0.108 mol

Moles of fluorine = 10.0 g / 18.998 g/mol = 0.526 mol

Then, use the ideal gas law to calculate the initial pressure:

PV = nRT

[tex]P = (0.108 mol + 0.526 mol) * 0.082 * 300 K / 10.0 L[/tex]

P = 0.935 atm

Since the reactants are completely consumed, the total number of moles of gas in the container after the reaction will remain the same as before the reaction. Therefore, the pressure of the container after the reaction will also be the same as before the reaction.

To learn more about molar mass click here https://brainly.com/question/22997914

#SPJ1

If 39.64 grams of carbon oxide [tex]CO2[/tex] are used, the amount of Fe produced is 33.6 grams.

The production of iron (Fe) from carbon monoxide (CO) is typically represented by the following equation:

Fe2O3 + 3CO → 2Fe + 3CO2

From the balanced chemical equation, we can see that for every 3 moles of carbon oxide [tex]CO2[/tex], 2 moles of iron Fe are produced. We can use this relationship to calculate the amount of Fe produced from the given amount of carbon oxide.

First, we need to determine the number of moles of carbon oxidein 39.64 grams of carbon oxide. The molar mass of [tex]CO2[/tex]is 44.01 g/mol, so:

39.64 g carbon oxide× (1 mol carbon oxide/ 44.01 g carbon oxide) = 0.9018 mol [tex]CO2[/tex]

Next, we can use the mole ratio from the balanced equation to determine the number of moles of iron Fe produced:

(2 mol Fe / 3 mol carbon oxide) × 0.9018 mol carbon oxide= 0.6012 mol iron Fe

Finally, we can convert the number of moles of iron Fe to grams using the molar mass of Fe, which is 55.85 g/mol:

0.6012 mol iron Fe × (55.85 g Fe / 1 mol Fe) = 33.6 g Fe

Therefore, if 39.64 grams of carbon oxide are used, the amount of iron Fe produced is 33.6 grams.

To learn more about carbon oxide please visit-
https://brainly.com/question/28870590
#SPJ1

Explanation:

To determine the number of hydrogen atoms in the container, we need to know the number of water molecules present in the container.

At standard temperature and pressure (STP), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere (atm), one mole of any gas occupies a volume of 22.4 liters. Therefore, the number of moles of water vapor present in the container can be calculated as:

n = V/22.4

where V is the volume of the container in liters. Substituting the given value, we get:

n = 2.80/22.4 = 0.125

So, there are 0.125 moles of water vapor in the container.

Now, to determine the number of hydrogen atoms present in the container, we need to know the number of water molecules in the container, since each water molecule contains two hydrogen atoms. The number of water molecules can be calculated as:

N = n * N_A

where N_A is Avogadro's number, which is equal to 6.022 x 10^23 molecules per mole. Substituting the values, we get:

N = 0.125 * 6.022 x 10^23 = 7.528 x 10^22

So, there are 7.528 x 10^22 water molecules in the container, and since each water molecule contains 2 hydrogen atoms, the total number of hydrogen atoms in the container is:

2 * N = 2 * 7.528 x 10^22 = 1.506 x 10^23

Therefore, there are 1.506 x 10^23 hydrogen atoms present in the container.

To solve this problem, we can use the conservation of mass and energy principles. The mass balance equation can be written as:

1.96 kg steam at 20 bar = x kg steam at T₁ and 20 bar + (1-x) kg steam at T₂ and 10 bar

Solving for x gives:

x = 0.9014

Therefore, 0.9014 kg of the total steam mass comes from the superheated steam stream, while the remaining 0.0986 kg comes from the saturated steam stream.

The energy balance equation can be written as:

(1.96 kg)(h₁) = (0.9014 kg)(h₁) + (0.0986 kg)(hf₂) + (product stream)

Solving for h₁, we get:

h₁ = 3449 kJ/kg

Similarly, solving for T₂ using the saturation table for steam at 10 bar gives:

T₂ = 179.9°C

To find T₁, we can use the steam tables to look up the enthalpy of superheated steam at 20 bar and use the energy balance equation to solve for T₁:

(1.96 kg)(3188 kJ/kg) = (0.9014 kg)(3449 kJ/kg) + (0.0986 kg)(hf(T₂)) + (product stream)

Solving for T₁ gives:

T₁ = 511.6°C

If heat is being lost from the blender to the surroundings, our estimate of T₁ would be too high. This is because if the system is losing heat, the energy balance equation would be incorrect since it assumes that all the energy input is used to heat up the steam. Thus, T₁ would be overestimated, and the actual value would be lower.

To learn more about  energy balance equation refer to:

brainly.com/question/30313275

#SPJ4

To create one mole of H₂, 2.0 moles of Ca must be reacted with 4.0 moles of water.

From the balanced chemical equation:

Ca + 2H₂O → Ca(OH)₂ + H₂

we can see that 1 mole of Ca reacts with 2 moles of H₂O to produce 1 mole of H₂. Therefore, we need to calculate how many moles of H₂O are required to react with 2.0 moles of Ca.

If 1 mole of Ca reacts with 2 moles of H₂O, then 2.0 moles of Ca will react with:

2.0 moles Ca x (2 moles H₂O/1 mole Ca) = 4.0 moles H₂O

Therefore, 4.0 moles of H₂O are needed to react with 2.0 moles of Ca to produce 1 mole of H₂.

To learn more about moles refer to:

brainly.com/question/26416088

#SPJ4

Answer:

250 grams

Explanation:

so if you look at the temperature of 50 and go up from there and stop at the red line you should get 250 grams, not positive but 99% of me says yes.

Answer:

Fossils form in five ways: preservation of original remains, permineralization, molds and casts, replacement, and compression.

Explanation:

Rock formations with exceptional fossils are called very important for scientists to study. They allow us to see information about organisms that we may not otherwise ever know.

Fossils are formed in many different ways, but most are formed when a living organism (such as a plant or animal) dies and is quickly buried by sediment (such as mud, sand or volcanic ash). Soft tissues often decompose, leaving only the hard bones or shells behind (but in special circumstances the soft tissues of organisms can be preserved). After the organism has been buried, more sediment, volcanic ash or lava can build up over the top of the buried organism and eventually all the layers harden into rock 

Answer:

The formula for calcium phosphate is Ca3(PO4)2.

(i) The type of bond formed between N and B is a coordinate covalent bond or a dative bond. This is because the lone pair of electrons on the nitrogen atom is donated to the boron atom to form a bond.

(ii) The F-B-F bond angle in this molecule is expected to be approximately 120 degrees.

(iii) This is because the molecule has a trigonal planar geometry, with the boron atom at the center and three fluorine atoms at the corners of an equilateral triangle. The lone pair of electrons on the nitrogen atom is also located in the same plane as the three fluorine atoms, and it occupies one of the corners of the trigonal planar arrangement. Therefore, the F-B-F bond angle is expected to be approximately 120 degrees, which is the ideal bond angle for a trigonal planar geometry.

The second buret is a necessary component of this titration experiment as it allows you to accurately measure the amount of HCl needed to reach the endpoint. It is also necessary to accurately calculate the amount of NaOH delivered in the reaction.

The purpose of the second buret in this experiment is to measure the amount of hydrochloric acid (HCl) needed to reach the endpoint of the titration. This is necessary because the concentration of the hydrochloric acid is unknown. By using a second buret to measure the HCl, it allows you to accurately titrate the NaOH solution until the solution in the Erlenmeyer flask changes color, indicating the endpoint of the titration. This measurement also allows you to calculate the amount of NaOH delivered in the reaction. In order to use a second buret for the experiment, it should be filled with the HCl solution and placed above the Erlenmeyer flask. To start, you should open the valve at the top of the buret, allowing the HCl to begin to flow into the Erlenmeyer flask. Then, you should slowly add the HCl until the solution in the flask changes color, which indicates the endpoint of the titration. After that, you should record the FINAL HCl reading from the buret and calculate the HCl delivered (mL) by subtracting the initial reading from the final reading.

To learn more about Titration ;

https://brainly.com/question/186765

#SPJ11

The SN2 reaction involves the strong nucleophile, good leaving group, polar aprotic solver, methyl or primary halide. So, option (b) is correct.

The SN2 reaction is defined as a type of reaction mechanism that involves one bond is broken and one bond is formed in a concerted way, that is in one step. This mechanism involves the nucleophilic substitution reaction of the leaving group that consists of halide groups or other electron-withdrawing groups with a nucleophile in a given organic compound.

The nucleophile attacks the carbon atom to which the leaving group is attached when the leaving group departs from the molecule. This reaction proceeds in a single step with the nucleophile and leaving group involved in the transition state.

Methyl halides are used in this reaction because they are less hindered which makes the attack by the nucleophile easier.

To learn more about SN2 reaction

https://brainly.com/question/25175580

#SPJ4