Help what’s the answer?

If you weigh 100 pounds on Earth, you would weigh approximately 38 pounds on Mars. This is because the gravitational force that you experience on Mars is only about 38% of the gravitational force that you experience on Earth due to the difference in the masses of the two planets.

To figure out how much you would weigh on Mars if you weigh 100 pounds on Earth, we can use the fact that the surface gravity on Mars is approximately 38% of the surface gravity on Earth. This means that your weight on Mars would be 38% of your weight on Earth.

We can start by calculating what 38% of 100 pounds is:

38% of 100 pounds = (38/100) x 100 pounds = 0.38 x 100 pounds = 38 pounds

Hence, if you weigh 100 pounds on Earth, you will weigh around 38 pounds on Mars. Because of the difference in the masses of the two planets, the gravitational force you experience on Mars is only roughly 38% of the gravitational force you experience on Earth.

For more such questions on gravitational force, click on:

https://brainly.com/question/28623512

#SPJ11

The molarity of the solution diluted to the 1200.0 ml volume is found to be 0.220M.

The number of moles of H₂SO₄ in the original 22 mL solution can be calculated using the following formula,

moles of H₂SO₄ = Molarity × Volume (in liters)

22 mL = 22/1000 L

= 0.022 L

Substituting the given values, we get,

moles of H₂SO₄ = 12 M × 0.022 L

= 0.264 moles

The number of moles of H₂SO₄ will not change once the solution is diluted to a volume of 1200.0 mL since no H₂SO₄ is added or taken away. Consequently, the following formula can be used to determine the molarity of the diluted solution:

Molarity = moles of H₂SO₄ / Volume (in liters)

Again, we need to convert the volume to liters,

1200.0 mL = 1200.0/1000 L

= 1.200 L

Substituting the values, we get,

Molarity = 0.264 moles / 1.200 L

= 0.220 M

Therefore, the molarity of the diluted solution is 0.220 M.

To know more about molarity, visit,

https://brainly.com/question/30404105

#SPJ4

The patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.

Patterns in the periodic table in terms of protons, electrons, and valence electrons, and how these might relate to an element being a metal or nonmetal.

In the periodic table, you'll notice the following patterns:

1. The number of protons (also known as the atomic number) increases by one from left to right across a period and down a group. This is because each element has one more proton than the element before it.

2. The number of electrons in a neutral atom is equal to the number of protons, so the electron count also increases by one across a period and down a group.

3. Valence electrons are the outermost electrons of an atom, and they play a significant role in chemical bonding. As you move from left to right across a period, the number of valence electrons increases from 1 to 8. In contrast, when you move down a group, the number of valence electrons remains the same.

Now, let's discuss how these patterns relate to an element being a metal or nonmetal:

1. Metals are typically found on the left side of the periodic table, while nonmetals are on the right side. This is because metals generally have fewer valence electrons (1 to 3) and are more likely to lose them in a chemical reaction. Nonmetals have more valence electrons (4 to 8) and are more likely to gain or share them.

2. The number of valence electrons determines the reactivity and bonding behavior of elements. Metals with fewer valence electrons are more reactive, while nonmetals with more valence electrons are less reactive.

In conclusion, the patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.

To know more about metal and nonmetal :

https://brainly.com/question/13963963

#SPJ11

The equilibrium will shift in favour of the products as a result of the addition of NaOH, producing more [tex]NH_4^+[/tex] and [tex]OH^-[/tex] ions. This will raise the solution's pH.

An increase in the concentration of one of the ions dissociated in the solution by the addition of another species containing the same ion will result in an increase in the degree of association of ions in a solution where there are several species associating with each other via a chemical equilibrium process. The equilibrium will shift in favour of the products as a result of the addition of NaOH, producing more [tex]NH_4^+[/tex] and [tex]OH^-[/tex] ions. This will raise the solution's pH.

To know more about equilibrium, here:

https://brainly.com/question/30694482

#SPJ12

The molarity of the sodium hydroxide, NaOH, needed to react with 15.7 mL of 0.700 M H₃PO₄, is 0.753 M

The molarity of the sodium hydroxide, NaOH, needed can be obtained as shown below:

3NaOH + H₃PO₄ —> Na₃PO₄ + 3H₂O

MaVa / MbVb = nA / nB

(0.7 × 15.7) / (Mb × 43.8) = 1 / 3

Cross multiply

Mb × 43.8 = 0.7 × 15.7 × 3

Divide both side by 43.8

Mb = (0.7 × 15.7 × 3) / 43.8

Mb = 0.753 M

Thus, we can conclude that the molarity of the NaOH needed is 0.753 M

Learn more about molarity:

https://brainly.com/question/13386686

#SPJ1

Part 1: This diagram depicts an endothermic reaction. Because the products have a higher potential energy than the reactants, energy is absorbed during the reaction.

Furthermore, the energy level of the products is greater than the reaction's activation energy, showing that energy must be given to the system for the reaction to occur.

Part 2: To calculate the total enthalpy change (H) from the diagram, subtract the energy of the reactants from the energy of the products. Because the energy of the products is greater than the energy of the reactants in an endothermic reaction, H will be positive.

To calculate the activation energy (Ea) from the diagram, subtract the energy of the reactants from the energy of the transition state. The activation energy is the smallest amount of energy required for the reaction to occur, hence it is the difference in energy between the reactants and the highest point on the diagram.

Ea will be positive in this situation because energy must be added to the system to achieve the transition state.

learn more about enthalpy here

https://brainly.com/question/14047927

#SPJ1

To determine the empirical formula of the compound, we need to first find the moles of each element present in the compound:

moles of Al = 94.5 g / 26.98 g/mol = 3.50 mol

moles of F = 199.5 g / 18.99 g/mol = 10.50 mol

Next, we need to find the ratio of the moles of each element in the compound by dividing by the smallest number of moles. In this case, the smallest number of moles is 3.50 mol:

moles of Al = 3.50 mol / 3.50 mol = 1

moles of F = 10.50 mol / 3.50 mol = 3

The empirical formula of the compound is therefore AlF3.

To know more about empirical refer here

https://brainly.com/question/977538#

#SPJ11

The mass of ammonia that will be produced according to the reaction given would be 17.9 g.

The balanced equation for the reaction is:

[tex]N_2 + 3H_2 -- > 2NH_3[/tex]

Also:

PV = nRT

The number of moles of nitrogen and hydrogen involved in the reaction can be calculated as:

From the balanced equation, we can see that the limiting reactant is nitrogen since it reacts with 3 moles of hydrogen to produce 2 moles of ammonia.

n(NH3) = (2 mol NH3 / 1 mol N2) x 0.526 mol N2 = 1.05 mol NH3

Mass of ammonia = mole x molar mass

                              = 1.05 mol x 17.03 g/mol

                              = 17.9 g

In other words, the mass of ammonia produced is 17.9 g.

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

From the balanced chemical equation, we can see that for every 1 mole of NaOH reacted, we get 1 mole of NaClO produced. Therefore, 4.6 moles of NaOH are needed to form 2.3 moles of NaClO.

The chemical equation for the reaction balances out as follows:

2NaOH + Cl2 → NaCl + NaClO + H₂O

From the equation, we can see that 2 moles of NaOH react with 1 mole of Cl₂, 1 mole of NaCl, 1 mole of NaClO, and 1 mole of water. Therefore, the stoichiometric ratio of NaOH to NaClO is 2:1, i.e., 2 moles of NaOH reacts with 1 mole of NaClO.

To find out how many moles of NaOH are needed to form 2.3 moles of NaClO, we can use the following proportion:

2 moles NaOH : 1 mole NaClO = x moles NaOH : 2.3 moles NaClO

By cross-multiplication, we get:

2 moles NaOH × 2.3 moles NaClO = 1 mole NaClO × x moles NaOH

4.6 moles NaOH = x moles NaOH

To learn more about equation follow the link:

brainly.com/question/30087623

#SPJ4

The amount of heat released by the production of 1.0 mole of SO3(g) is 196 kJ.

To determine the amount of heat released by the production of 1.0 mole of SO3(g), we need to first balance the chemical equation:

2SO2(g) + O2(g) = 2SO3(g) + 392 kJ

Now, we can see that 2 moles of SO3 are produced by releasing 392 kJ of heat. To find the heat released for 1 mole of SO3, we can set up a proportion:

(392 kJ) / (2 moles of SO3) = x kJ / (1 mole of SO3)

Solving for x:

x = (1 mole of SO3) * (392 kJ) / (2 moles of SO3)
x = 196 kJ

So, the amount of heat released by the production of 1.0 mole of SO3(g) is 196 kJ.

To learn more about heat, refer below:

https://brainly.com/question/1429452

#SPJ11

The best way to cook a spiral ham without drying it out is to use the low and slow method.

A method is a procedure or a technique used to produce the intended results. It is a methodical technique to problem solving that entails dividing a task into smaller components and carrying them out in a specified manner.

Methods are employed in every aspect of life, including commerce, engineering, and mathematics. In the sciences, where the scientific method is applied to test hypotheses and derive conclusions, methods are particularly crucial.

This entails cooking the gammon for a longer amount of time (approximately 15 minutes per pound) at a low temperature (about 325°F). Remove the gammon from its plastic wrapper before cooking it, and set it in a shallow roasting pan.

After that, cover the ham with foil, making sure that it is tightly sealed. Then, place the ham in the oven and cook it for the recommended length of time. Lastly, about 10 minutes before the end of the cooking time, remove the foil and brush the ham with a glaze of your choosing. This will help add flavor and moisture to the ham and help keep it from drying out.

To learn more about spiral ham

https://brainly.com/question/30518035

#SPJ4

a. In a solution that is 0.010 M in Ba²⁺ and 0.020 M in Ca²⁺, when sodium sulfate (Na₂SO₄) is used to selectively precipitate one of the cations, the cation that will precipitate first is Ba²⁺. The minimum concentration of Na₂SO₄ that trigger the precipitation of the cation that precipitates first is 5.5 x 10^-9 M Na₂SO₄.

b. The remaining concentration of the cation that precipitates first, when the other cation begins to precipitate is 2.0 x 10^-2 M.

Let us discuss this in detail.

a. To determine which cation will precipitate first, we need to compare the solubility product constants (Ksp) of their respective sulfates. The Ksp for BaSO₄ is 1.1 x 10^-10 and the Ksp for CaSO₄ is 2.4 x 10^-5. Since the Ksp for CaSO₄ is much larger, it means that CaSO₄ is more soluble than BaSO₄. Therefore, Ba²⁺ will precipitate first.

To calculate the minimum concentration of Na₂SO₄ needed to trigger the precipitation of Ba²⁺, we need to use the common ion effect. This means that we need to add enough sulfate ions to the solution to exceed the solubility product constant of BaSO₄. The equation for the dissociation of Na₂SO₄ is:

Na₂SO₄(s) → 2 Na⁺(aq) + SO₄²⁻(aq)

Since we have 0.010 M Ba²⁺ in the solution, we need to add enough SO₄²⁻ ions to exceed the Ksp of BaSO₄. This can be calculated using the equation:

Ksp = [Ba²⁺][SO₄²⁻]

1.1 x 10^-10 = (0.010 M)(x)

x = 1.1 x 10^-8 M

This means that we need to add at least 1.1 x 10^-8 M SO₄²⁻ ions to trigger the precipitation of Ba²⁺. Since Na₂SO₄ dissociates to give 2 SO₄²⁻ ions for every formula unit, we need to add:

(1.1 x 10^-8 M) / 2 = 5.5 x 10^-9 M Na₂SO₄

b. Once Ba²⁺ starts to precipitate, the concentration of Ba²⁺ ions in the solution will decrease until it reaches a new equilibrium. At this point, the concentration of Ca²⁺ will still be 0.020 M. To calculate the new concentration of Ba²⁺ at this equilibrium, we need to use the equation:

Ksp = [Ba²⁺][SO₄²⁻]
1.1 x 10^-10 = (x)(5.5 x 10^-9 M)

x = 2.0 x 10^-2 M

Therefore, the remaining concentration of Ba²⁺ at equilibrium will be 2.0 x 10^-2 M.

Learn more about cations at https://brainly.com/question/14309645

#SPJ11

The number of moles of the HCl that can be made from the 6.15 mol H₂ and the excess of the Cl₂ is 12.3 mol.

The balanced chemical equation is :

H₂  + Cl₂   --->  2HCl

The number of moles of H₂ = 6.15 mol

The number of moles of any substance = mass / molar mass

The 1 mole of H₂ produces the 2 moles of HCl

The molar ratio in between the H₂  and the HCl is 1 : 2

The number of moles of HCl = 2 × 6.15 mol

The number of moles of HCl = 12.3 mol

Therefore, the total number of moles of HCl produces in the reaction is 12.3 moles.

To learn more about moles here

https://brainly.com/question/31597231

#SPJ1

Answer:

i. 0.50 mol CO2

ii. 332.94g CaCl2

Explanation:

CaCO3 + 2HCl -> CaCl2 + CO2 + H2O

i. 36.5g HCl * 1 mol HCl/36.46g HCl * 1 mol CO2/2 mol HCl  = 0.50 mol CO2

ii. 3 mol CaCO3 * 1 mol CaCl2/1 mol CaCO3 * 110.98g CaCl2/1 mol CaCl2 = 332.94g CaCl2

The original pressure in the container was 9.028 atm.

To solve this problem, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas. The equation is P1V1/T1 = P2V2/T2, where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.

We are not given the temperature, so we can assume that it is constant.

First, we can rearrange the equation to solve for P1:
P1 = (P2V2/T2) * T1/V1

Substituting the given values, we get:
P1 = (6.10 atm * 3.7 L) / (2.5 L * T2) * T1

Since the temperature is constant, we can cancel it out, and the equation becomes:
P1 = (6.10 atm * 3.7 L) / (2.5 L)

Simplifying, we get:
P1 = 9.028 atm

Therefore, the original pressure in the container was 9.028 atm.

To know more about original pressure, visit:

https://brainly.com/question/1132289#

#SPJ11

The equilibrium constant (K) at 25°C for the reaction of methane with water to form carbon dioxide and hydrogen is 8.04×10⁻¹³. This indicates that the reaction strongly favors the reactants, and very little of the products will be formed at equilibrium.

To calculate the equilibrium constant at 25°C for the reaction of methane with water to form carbon dioxide and hydrogen, we use the formula:

[tex]Kc = \left(\frac{{[CO_2][H_2]^4}}{{[CH_4][H_2O]^2}}\right)[/tex]

where [ ] denotes concentration in moles per liter. We need to first determine the concentrations of the various species at equilibrium. For this, we use the Gibbs free energy change (ΔG) of the reaction, which is related to the equilibrium constant through the equation:

[tex]\Delta G^\circ = -RT \ln(Kc)[/tex]

where R is the gas constant (8.314 J/K mol), T is the temperature in Kelvin (25°C = 298 K), and ΔG° is the standard free energy change for the reaction, which can be calculated from the standard free energy of formation (ΔGf°) values of the reactants and products:

[tex]\Delta G^\circ = \sum n\Delta G_f^\circ(\text{products}) - \sum m\Delta G_f^\circ(\text{reactants})[/tex]

where n and m are the stoichiometric coefficients of the products and reactants, respectively. Using the given values, we get:

[tex]\Delta G^\circ = [1(-394.4) + 4(0)] - [1(-50.81) + 1(-241.8) + 2(0)][/tex]

ΔG° = -805.37 J/mol

Substituting this value and the other given values into the equation for ΔG°, we get:

[tex]Kc = e^(-ΔG°/RT)[/tex]

[tex]Kc = e^(-805.37/(8.314×298))[/tex]

Kc = 8.04×10⁻¹

Therefore, the equilibrium constant at 25°C for the reaction of methane with water to form carbon dioxide and hydrogen is 8.04×10⁻¹³.

To know more about the  equilibrium constant refer here :

https://brainly.com/question/19671384#

#SPJ11

The heat of combustion of methane is -802.41 kJ/mol, indicating that the combustion of methane is an exothermic reaction that releases heat energy.

To calculate the heat of combustion of methane, we can use formula:

q = (m_water x C_water x ΔT) + (C_cal x ΔT)

Plugging in the values, we get:

q = (1000 g x 4.184 J/g°C x 17.4°C) + (615 J/°C x 17.4°C)

q = 21997.45 J

Next, we need to calculate the number of moles of methane burned:

moles [tex]CH_4[/tex] = mass [tex]CH_4[/tex] / molar mass [tex]CH_4[/tex]

moles [tex]CH_4[/tex] = 65 g / 16.04 g/mol

moles [tex]CH_4[/tex] = 4.05 mol

Finally, we can calculate the heat of combustion per mole of methane:

ΔH = q / moles [tex]CH_4[/tex]

ΔH = -802.41 kJ/mol

To know more about exothermic reaction, here

brainly.com/question/10373907

#SPJ4

--The complete Question is, 1. 65g of methane CH4 is burned in a bomb calorimeter containing 1000 grams of water. The initial temperature of water is 18. 98oC. The specific heat of water is 4. 184 J/g oC. The heat capacity of the calorimeter is 615 J/ oC. After the reaction the final temperature of the water is 36. 38oC.--

To produce exactly 3.50 g of NaCl, we need 5.00 g of NaHCO3 and 2.18 g of HCl.

To find how much of the reactant is needed we need to use stoichiometry for finding the solution.

The balanced equation is : [tex]NaHCO_3 + HCl \rightarrow NaCl + CO_2 + H_2O[/tex]

We need to produce exactly 3.50 g NaCl. Now from the balanced equation, we can see that the molar ratio of [tex]NaHCO_3[/tex] to NaCl is 1:1. Therefore, we can  use the molar mass of NaCl to find the moles of NaCl that correspond to 3.50 g:

molar mass of NaCl = 58.44 g/mol

moles of NaCl = 3.5 / 58.44 = 0.0598 mol NaCl

As the molar ratio of [tex]NaHCO_3[/tex] to NaCl is 1:1, therefore we need 0.0598 mol of [tex]NaHCO_3[/tex]. Similarly, the molar ratio of HCl to [tex]NaHCO_3[/tex] is 1:1. Therefore, we need 0.0598 mol of HCl.

Now we can use the molar mass of each element to find the mass of each reactant required.

molar mass of [tex]NaHCO_3[/tex] = 84.01 g/mol

mass of [tex]NaHCO_3[/tex] = 0.0598 mol × 84.01 g/mol = 5.00 g

molar mass of HCl = 36.46 g/mol

mass of HCl = 0.0598 mol × 36.46 g/mol = 2.18 g

Therefore, to produce exactly 3.50 g of NaCl, we need 5.00 g of [tex]NaHCO_3[/tex] and 2.18 g of HCl.

Learn more about stoichiometry at:

https://brainly.com/question/30820349

#SPJ1

The answer is  is approximately 344.16 L.

To find the volume of 34.6 mol O2 at 2.5 atm and 30°C, we can use the Ideal Gas Law equation: PV = nRT.

In this equation:
P = pressure (2.5 atm)
V = volume (which we need to find)
n = moles of gas (34.6 mol O2)
R = ideal gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin (30°C + 273.15 = 303.15 K)

Rearrange the equation to solve for V: V = nRT / P

Now, plug in the values: V = (34.6 mol)(0.0821 L atm/mol K)(303.15 K) / (2.5 atm)

Calculate the volume: V ≈ 344.16 L

The volume of 34.6 mol O2 at 2.5 atm and 30°C is approximately 344.16 L.

To know more about Ideal gas law:

https://brainly.com/question/27870704

#SPJ11

By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

The mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. Protons and neutrons are located in the nucleus of an atom, while electrons are located in the electron cloud surrounding the nucleus.

To illustrate that the mass of an atom of element X is equivalent to the total mass of 7 hydrogen atoms, we first need to determine the mass of an atom of hydrogen and the mass of an atom of element X.

The mass of an atom of hydrogen is approximately 1 atomic mass unit (amu). Therefore, the total mass of 7 hydrogen atoms is 7 amu.

Now, let's assume that the mass of an atom of element X is also 7 amu. This means that the total number of protons, neutrons, and electrons in one atom of element X is equivalent to the total number in 7 hydrogen atoms.

Therefore, the element represented by X is nitrogen. The atomic mass of nitrogen is 14.007 amu, which is equivalent to the total mass of 7 hydrogen atoms.

In summary, the mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

To know more about hydrogen atoms, visit:

https://brainly.com/question/29695801#

#SPJ11

About  739,982.4 Joules energy is required to raise the temperature of 100.0 grams of water from -269 degrees Celsius to 1500 degrees Celsius.

The formula for the change in heat is,

Q = mcΔT, the amount of energy required is Q, m is the mass of water, specific heat capacity of water is c, the change in temperature is ΔT,

ΔT = 1500°C - (-269°C)

ΔT = 1769°C

Next, we can look up the specific heat capacity of water, which is 4.184 J/g°C. Then, we can substitute the values into the formula,

Q = 100.0 g * 4.184 J/g°C * 1769°C

Q = 739,982.4 J

Therefore, it would require 739,982.4 Joules of energy to raise the temperature of 100.0 grams of water from -269 degrees Celsius to 1500 degrees Celsius.

To know more about change in heat, visit,

https://brainly.com/question/8828503

#SPJ4

Answer:

Reduction

Explanation:

The new volume of the gas at STP is 163.8 mL. The pressure in the aerosol can at a temperature of 60 C is 8.4 atm. The volume of nitrogen at STP is 558.8 mL.

1. To solve for the new volume of the gas at STP, we can use the combined gas law equation:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively, at STP. We know that STP is defined as 1 atm and 273 K.

Plugging in the given values, we get:

(6 atm x 10 mL)/100 K = (1 atm x V2)/273 K

Simplifying and solving for V2, we get:

V2 = (6 atm x 10 mL x 273 K)/(100 K x 1 atm) = 163.8 mL

Therefore, the new volume of the gas at STP is 163.8 mL.

2.To solve for the pressure in the aerosol can at a temperature of 60 C, we can use the combined gas law equation again:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively, at 60 C. We know that V1 is constant since the can is sealed.

Plugging in the given values, we get:

(8 atm x V1)/318 K = (P2 x V1)/333 K

Simplifying and solving for P2, we get:

P2 = (8 atm x 333 K)/(318 K) = 8.4 atm

Therefore, the pressure in the aerosol can at a temperature of 60 C is 8.4 atm.

3. To solve for the volume of nitrogen at STP, we can use the combined gas law equation again:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively, at STP. We know that P1 is constant since it is given that the pressure is constant.

Plugging in the given values and using the values for STP, we get:

(1 atm x 600 mL)/(293 K) = (P2 x V2)/(273 K)

Simplifying and solving for V2, we get:

V2 = (1 atm x 600 mL x 273 K)/(293 K) = 558.8 mL

Therefore, the volume of nitrogen at STP is 558.8 mL.

To know more about aerosol refer to-

https://brainly.com/question/29418985

#SPJ11

Starting with 29.25 g of NaOH and 107 g of FeCl₃, the limiting reactant is NaOH with yeild percentage of 60%.

To find the reaction yield and the limiting reactant, starting with 29.25 g of NaOH and 107 g of FeCl₃, you need to perform the following steps:

1. Write the balanced chemical equation:
FeCl₃ + 3NaOH → Fe(OH)₃ + 3NaCl

2. Calculate moles of each reactant:
NaOH: 29.25 g / (23.0 g/mol Na + 15.99 g/mol O + 1.01 g/mol H) ≈ 0.729 moles
FeCl₃: 107 g / (55.85 g/mol Fe + 3 * 35.45 g/mol Cl) ≈ 0.397 moles

3. Identify the limiting reactant:
For every mole of FeCl₃, you need 3 moles of NaOH. Divide moles of each reactant by their coefficients in the balanced equation:
NaOH: 0.729 moles / 3 ≈ 0.243
FeCl₃: 0.397 moles / 1 ≈ 0.397

The smaller value is for NaOH, so it is the limiting reactant.

To know more about limiting reactant click on below link:

https://brainly.com/question/14225536#

#SPJ11

The words listed under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew" would be: Rhinoceros, Hare, Onions, Water, Broth, Salt, Pepper, and Hair.

Under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew," the following words would be listed:

Hair (Note: this is an unusual ingredient and may be questioned as to its necessity in the recipe)

Learn more about Ingredients here: https://brainly.com/question/28000963

#SPJ1

After three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

If a radioisotope has a half-life of t, then the amount of the radioisotope that remains after n half-lives can be calculated using the formula:

[tex]N = N0 * (1/2)^n[/tex]

where N0 is the initial amount of the radioisotope.

If three half-lives have passed, then n = 3. Using the given initial amount of 20.0 g, we can calculate the amount that remains after three half-lives as follows:

[tex]N = N0 * (1/2)^n\\N = 20.0 g * (1/2)^3[/tex]

N = 20.0 g * (1/8)

N = 2.50 g

Therefore, after three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

To know more about radioisotope refer to-

https://brainly.com/question/13076859

#SPJ11

To calculate the volume of 0.75 M KCl solution required to obtain 2.0 moles of the solute, we can use the formula:

moles = concentration x volume

Rearranging this formula, we get:

volume = moles / concentration

Substituting the given values, we get:

volume = 2.0 moles / 0.75 M

volume = 2.67 L

Therefore, you would need 2.67 liters of 0.75 M KCl solution to obtain 2.0 moles of the solute.

To know more about volume refer here

https://brainly.com/question/28058531#

#SPJ11

In the following problems, various calculations related to solutions and chemical reactions are performed, including percent composition, molarity, and neutralization. The setup and units are provided, and the final answers are shown.

Let's proceed with the calculations:

1. Mass of NaOH = 22.5 g

Mass of water = 75.0 g

Total mass of solution = 22.5 g + 75.0 g = 97.5 g

% composition of NaOH = (mass of NaOH/total mass of solution) x 100%

= (22.5 g/97.5 g) x 100%

= 23.08%

% composition of water = (mass of water/total mass of solution) x 100%

= (75.0 g/97.5 g) x 100%

= 76.92%

2. Volume of solution = 3.00 L

Concentration of solution = 0.065 M

moles = concentration x volume

= 0.065 M x 3.00 L

= 0.195 mol

Therefore, 0.195 mol of aluminum nitrate are required.

3. Mass of aluminum nitrate = 7.50 g

Molar mass of aluminum nitrate = 213.0 g/mol

Concentration of solution = 0.500 M

moles of aluminum nitrate = mass/molar mass

= 7.50 g/213.0 g/mol

= 0.035 mol

Volume of solution = moles/concentration

= 0.035 mol/0.500 M

= 0.070 L = 70 mL

Therefore, 70 mL of 0.500 M solution can be prepared.

4. Volume of 15.0 M ammonium hydroxide required = (0.30 M/15.0 M) x 175.0 mL

= 3.50 mL

Therefore, 3.50 mL of 15.0 M ammonium hydroxide are needed.

5. Volume of potassium sulfate solution = 623 mL

% composition of potassium sulfate in solution = 22.5%

Density of solution = 1.23 g/mL

Mass of solution = volume x density

= 623 mL x 1.23 g/mL

= 766.29 g

Mass of potassium sulfate = % composition x mass of solution/100

= 22.5% x 766.29 g/100

= 172.91 g

Therefore, 172.91 g of potassium sulfate would be recovered.

6. Volume of hydrobromic acid solution = 100.0 mL

Concentration of hydrobromic acid solution = 11.0 M

Molar mass of hydrobromic acid = 80.91 g/mol

moles of hydrobromic acid = concentration x volume

= 11.0 M x 0.100 L

= 1.10 mol

Mass of hydrobromic acid = moles x molar mass

= 1.10 mol x 80.91 g/mol

= 88.99 g

Therefore, 88.99 g of hydrobromic acid are present in 100.0 mL of 11.0 M hydrobromic acid solution.

7. Volume of sulfuric acid sample = 525.0 mL

Concentration of sulfuric acid = 5.50 M

Density of sulfuric acid sample = 1.49 g/mL

Mass of sulfuric acid sample = volume x density

= 525.0 mL x 1.49 g/mL

= 779.25 g

Mass percent of sulfuric acid = (mass of sulfuric acid / total mass of solution) x 100%

= (779.25 g / 779.25 g) x 100%

= 100%

Therefore, the concentration of the sulfuric acid solution in mass percent is 100%.

8. The balanced equation for the reaction is:

H₂SO₄ + 2NaOH -> 2H₂O + Na₂SO₄

According to the balanced equation, the molar ratio between sulfuric acid (H₂SO₄) and sodium hydroxide (NaOH) is 1:2.

Volume of sulfuric acid sample = 15.0 mL

Volume of sodium hydroxide solution = 25.5 mL

Concentration of sodium hydroxide solution = 0.546 M

Moles of sodium hydroxide = concentration x volume

= 0.546 M x 25.5 mL

= 0.01397 mol

From the balanced equation, 1 mole of sulfuric acid reacts with 2 moles of sodium hydroxide. Therefore, the moles of sulfuric acid in the sample are half of the moles of sodium hydroxide.

Moles of sulfuric acid = 0.01397 mol / 2

= 0.006985 mol

Volume of sulfuric acid sample = 15.0 mL = 0.0150 L

Molarity of sulfuric acid = moles of sulfuric acid / volume of sulfuric acid

= 0.006985 mol / 0.0150 L

= 0.4657 M

Therefore, the molarity of the sulfuric acid is 0.4657 M.

To know more about the balanced equation refer here :

https://brainly.com/question/7181548#

#SPJ11

Complete question :

Show all calculation setups, including units, for all problems, and enter answer(s), including units and correct significant figures, on the line(s).

1. What will be the percent composition by mass of a solution made by dissolving 22.5 g of sodium hydroxide in 75.0 g water? NaOH

2. How many moles of aluminum nitrate are required to prepare 3.00 L of 0.065 M solution?

3. How many milliliters of 0.500 M solution can be prepared by dissolving 7.50 g of aluminum nitrate in water?

4. How many milliliters of 15.0 M ammonium hydroxide are needed to prepare 175.0 mL of 0.30 M ammonium hydroxide solution? 133

5. How many grams of potassium sulfate would be recovered by evaporating 623 mL of 22.5 % potassium sulfate solution to dryness (d 1.23 g/mL)?

6. How many grams of hydrobromic acid are in 100.0 mL of 11.0 M hydrobromic acid solution?

7. A 525.0 mL sample of 5.50 M sulfuric acid has a density of 1.49 g/mL. Express the concentration of the solution in mass percent. water +

8. Consider the following equation: sulfuric acid + sodium hydroxide sodium sulfate A 15.0 mL sample of sulfuric acid required 25.5 mL of 0.546 M sodium hydroxide for neutralization. Calculate the molarity of the acid. (Hint: start by writing and balancing the equation)

In the 17th group of the modern periodic table, fluorine has the highest ability to receive electrons.

This is because it has the highest electronegativity among the elements in this group, making it more likely to attract and accept electrons from other elements during chemical reactions.

Fluorine is indeed the most electronegative element in the periodic table. Electronegativity is a measure of an atom's tendency to attract electrons in a chemical bond.

Fluorine's high electronegativity arises from its small atomic size and strong nuclear charge, which results in a strong attraction for electrons.

Due to its high electronegativity, fluorine has a strong ability to attract and accept electrons from other elements during chemical reactions. It readily forms covalent bonds by sharing electrons with less electronegative elements.

Fluorine's electron affinity and its ability to form stable, negatively charged ions make it a strong oxidizing agent.

It's worth noting that the trend of increasing electronegativity generally follows from left to right across a period and decreases down a group in the periodic table.

Therefore, while fluorine is the most electronegative element in Group 17 (the halogens), it may not necessarily have the highest ability to receive electrons among all elements in the 17th group.

To learn more about elements, refer below:

https://brainly.com/question/13025901

#SPJ11

No, it is not true that the hospital accidentally switched babies. The trait is most likely due to the inheritance of two recessive alleles.

Toad's family being purebred dominant for red spots on their white cap means that they have two copies of the dominant allele for red spots on their cap.

However, Toadette may carry one copy of the dominant allele and one copy of the recessive allele for white spots on the cap. If Toad also carries one copy of the recessive allele, there is a chance that their offspring may inherit the recessive allele from both parents, resulting in a white cap with white spots.

Therefore, it is entirely possible for Little Toad to inherit the recessive allele for white spots from Toadette and Toad and display the trait. There is no need to suspect the hospital of switching babies as the genetics of the situation explains the observed outcome.

More on recessive inheritance can be found here: https://brainly.com/question/15481938

#SPJ1