Answer:
ajajbshdbrbxjdnd djxbxbx
Explanation:
hdjdndjsosnbdjdkx dkdmdbdjd
Which of the following natural processes will NOT directly result in the formation of sedimentary rock?
A. River Flow
B. Windstorm
C. Metamorphic change
D. Glacial Motion
Answer:
Windstorm Hope it helped brainiest plz and thank you have a great day!!!
Explanation:
Which of the following natural processes will NOT directly result in the formation of sedimentary rock?
B. Windstorm
Look at screen shot.
Answer:
If the cell was a city, what would the city have inside it for it to function as a cell?
Explanation:
The cell membrane can be a fence or wall around the city because it controls what enters and leaves the cell, and separates the cell from the outside.
The nucleus could be the city hall because it protects DNA and controls the cell (city)
The mitochondria could be the greenhouse because it makes ATP energy from sugar + 02
The chloroplasts could be a farm or garden because it is where photosynthesis takes place and makes energy + sugar from sunlight
The ribosomes could be the factory to make stuff because it makes proteins
The endoplasmic reticulum could be a kitchen or restaurant because it helps finish proteins, and makes membranes.
The golgi apparatus could be the postal office because it finishes packages and ships proteins
The vacuoles could be a water tank because it storages water
I hope this helps. It is basically as if something was turning into a city-type thing. Like Lysosome could be a recycling center in a city.
Describe the five layers of the earth by providing the following information for each layer:
Name of the layer
Composition
Average temperature
Average thickness
make simple! pls
Answer:
answers below
Explanation:
Lithosphere/ Crust- made of large plates that move, average thickness is 30 km, average temperature is 25 degrees Celsius
Inner Core- made of solid iron, 1,200 km thick, 7,000 degrees Celsius
Outer Core- made of a dense liquid of iron and sulfur, 2,250 km thick, 4,000 degrees Celsius
Lower Mantle- made of solid rock, 2,200 km thick, 3,000 degrees Celsius
Asthenosphere/ Upper Mantle- made up of solid rock that flows due to plasticity, 720 km thick, 850 degrees Celsius
What is an engineer?
a person trained to use technology and science to solve problems
b. a person who manufactures or produces a product
с. a person who markets and advertises a product
d all of the above
The mass of 2.50 moles of calcium fluoride (CaF2) is how many
grams.
Answer:
195.199 grams
what would the heat transfer be if you are making macaroni and it rises and falls in a pot on the stove ?
Which statement describes a shortcoming of Rutherford’s model of the atom?A.
It incorrectly placed most of the atom’s mass in the nucleus.
B.
It did not explain how electrons behaved and why they don’t collide with the nucleus.
C.
It did not account for the fact that atoms have equal numbers of protons and electrons.
A shortcoming of Rutherford’s model of the atom is it did not account for the fact that atoms have equal numbers of protons and electrons. Therefore, option C is correct.
What is rutherford's model ?Ernest Rutherford, a scientist who was born in New Zealand, developed the Rutherford model to explain an atom. Rutherford oversaw the Geiger-Marsden experiment, which, after Rutherford's analysis in 1911, indicated that J. J. Thomson's plum pudding model of the atom was flawed, in 1909.
The first person to recognize an atom's nucleus was Rutherford. He attacked gold with -particles and discovered that there was positively charged material inside the atom as a result.
It did not explain the distribution of the atom's negatively charged electrons around its positively charged nucleus.
Thus, option C is correct.
To learn more about rutherford's model, follow the link;
https://brainly.com/question/11749615
#SPJ6
someone help me please i need to finish this
the answer is D hope it helps :)
Question 5 of 5
Which idea was not supported by Dalton's atomic model but was supported in
all later atomic models?
A. A central, positive nucleus
B. Electrons in orbits
C. Positive and negative parts
D. Electron clouds
Answer:
It’s A
The indivisibility of an atom was proved wrong: an atom can be further subdivided into protons, neutrons and electrons. However an atom is the smallest particle that takes part in chemical reactions. According to Dalton, the atoms of same element are similar in all respects.
Please help me!! I will literally pay you if you do my one aleks topic due tomorrow!! I have multiple example problems. It’s same Q different numbers
Answer:
I'll do it if you give brainlyest and some points
The diameter of Mercury is 4,878,000 meters.
Type your answer..
Answer:
The diameter of a mercury atom is 151 pm and the diameter of the planet Mercury is 4,879.4 km.
Continual eruptions occur along mid-ocean ridges, forming new sea-floor rock. The
rocks closest to a mid-ocean ridge are the youngest | oldest. As you move away from
a mid-ocean ridge, the rocks get younger | older. This implies that crust is being
consumed | produced at mid-ocean ridges
The characteristics of the ocean ridges allow finding the results to complete the statements are:
The rocks near the ridge are YOUNGER. While you walk away the rocks are OLDER. This implies that the cortex is PRODUCING in the ridges.
The oceanic ridges are mountain ranges or chains of volcanic mountains at the bottom of the ocean, in these the magma that rises cools and forms young rocks, in they are pushed by the other rocks that emerge, in general they are located on the edges of the tectonic plates .
Therefore, the oceanic ridges are the point where the earth's crust is separating, therefore it has the youngest rocks and in the furthest points it has the oldest.
Let's find the correct words for each phrase to be correct:
The rocks near the ridge are YOUNGER. You walk away the rocks are OLDER. This implies that the cortex is PRODUCING in the ridges.
As a consequence of the characteristics of the ocean ridges, we can find the results to complete the statements are:
The rocks near the ridge are YOUNGER. While you walk away the rocks are OLDER. This implies that the cortex is PRODUCING in the ridges.
Learn more here: brainly.com/question/3404002
defintion for concentration
Answer:
concentration is the abundance of a constituent divided by the total volume of a mixture.
Explanation:
hope this helps <33
have a good afternoon:)
and also can i have brainliest plz? :D
what is the net ionic equation for ammonium chloride and sodium hydroxide
Answer:
In the complete ionic equation, soluble ionic compounds and strong acids are rewritten as dissociated ions. write the ionic and net ionic equation for this equation: Ammonium Chloride + Sodium Hydroxide NH_4Cl + NaOH = NH_3 + H_2O + NaCl There are so many chemical reactions that occur around us that we classify them into different types.
Explanation:
If the reaction occurs between Fe2S3(s) and H(aq) and the equation is properly balanced with the
smallest whole-number coefficients, what is the sum of the coefficients for all reactants and products?
Fe2S3(s) + H+ (aq)
Please answer this mathematically.
In the reaction between Fe₂S₃(s) and HBr(aq), the sum of the coefficients for all reactants and products is 12.
If the reaction occurs between Fe₂S₃(s) and HBr(aq) and the equation is properly balanced with the smallest whole-number coefficients, what is the sum of the coefficients for all reactants and products?
Let's consider the unbalanced equation for the reaction between Fe₂S₃(s) and HBr(aq). This is a double displacement reaction.
Fe₂S₃(s) + HBr(aq) ⇒ FeBr₃(aq) + H₂S(g)
We will balance it using the trial and error method.
First, we will balance Fe atoms by multiplying FeBr₃ by 2.
Fe₂S₃(s) + HBr(aq) ⇒ 2 FeBr₃(aq) + H₂S(g)
Then, we will balance S atoms by multiplying H₂S by 3.
Fe₂S₃(s) + HBr(aq) ⇒ 2 FeBr₃(aq) + 3 H₂S(g)
Finally, we will get the balanced equation by multiplying HBr by 6.
Fe₂S₃(s) + 6 HBr(aq) ⇒ 2 FeBr₃(aq) + 3 H₂S(g)
The sum of the coefficients for all reactants and products is:
[tex]1 + 6 + 2 +3 = 12[/tex]
In the reaction between Fe₂S₃(s) and HBr(aq), the sum of the coefficients for all reactants and products is 12.
Learn more: https://brainly.com/question/7181548
If you have a density of 3 g/mL and a volume of 10 mL, what is the mass?
Answer:
30 gram
Explanation:
Hope this helps
Brainliest pls ❤️
5. Neon has two major isotopes. Neon-20 and Neon-22. Out of every 250 neon atoms, 225 will be Neon-20
(19.992 g/mol), and 25 will be Neon-22 (21.991 g/mol). What is the average atomic mass of Neon?
Answer:
20.1974
Explanation:
The Atomic mass will be the same for every isotope as the number of Neutrons changes, not the number of protons.
Neon has two major isotopes. Neon-20 and Neon-22. Out of every 250 neon atoms, 225 will be Neon-2(19.992 g/mol), and 25 will be Neon-22 (21.991 g/mol), then the average atomic mass of Neon20.1974
What are the difference between atomic number and atomic mass ?Atomic mass of an element can be defined as the total number of neutrons and protons present in the nucleus of an atom and the atomic number is the number of protons present in nucleus.
the average weight of an element is called as atomic mass while atomic number is total number of protons present in the central nucleus of the atom. Atomic mass is presented a symbolic representation of A where as atomic number is represented by the letter Z.
Atomic mass can not classified which type of element where as Atomic number classify and identify the type of element, there are different types of isotopes of an element observed on the basis of their atomic mass where as isotopes only share the same atomic number.
Neon has two isotopes such as , N e 20, N e 21 and N e 22.The average atomic mass can be calculated as:
N e Average atomic mass = [ 19.9924 (90.92 %)] + [ 20.9940 (0.257 %)] + [ 21.9914 (8.82 %)] a m u
Learn more about atomic mass, here:
https://brainly.com/question/17067547
#SPJ2
which statement describes virginia's watershed i need this ASAP pls help
B: It has fewer than 10 total watersheds best describes
What is a watershed?A watershed is the area of land where all of the water that falls in it and drains off of it goes to a common outlet. All the land drains water into rivers that drain into the Chesapeake Bay, where it enters the Atlantic Ocean.
Why is it called a watershed?The area that drains into a single river is the watershed for that river.
Learn more about Watershed here
https://brainly.com/question/24813719
#SPJ2
What coefficient is needed to balance the reaction
CaCl2 + H2CO3 → CaCO3 + HCI?
Answer:
CaCl2 + H2CO3 -> CaCO3 + 2HCl
Explanation:
Balancing this equation was a relatively simple example. Making sure to have all parts on the left equal to the ones on the right is the most important part.
Ca 1 = 1
Cl 2 = 2
H 2 = 2
C 1 = 1
O 3 = 3
Answer:2HCl
Explanation: just did it
Ryan just joined the track team. He runs the 40 yard dash in 6.4 seconds. Explain three human body systems that work together to help Ryan run.
Answer:
Respiratory because you use a lot of cellular respiration to bring oxygen into the body.
Nervous because signals are sent from our brain to our muscles.
Circulatory to help with breathing and movement of blood and oxygen
Explanation:
Hope this helps!
Describe the relationship between the state of matter of water (gas, liquid, solid) and the motion of the water molecules
Water has three states of matter namely gas, solid or ice form and liquid. Molecules in solid state are not able to move since they are tightly packed.
Molecules can move in liquid state and they moves easily in gaseous state.
What is states of matter?Every substance have three states, that are gas, liquid and solid. In solid state, molecules are tightly packed and are unable to move apart. In liquid state, molecules have some space to move and motion of liquid is easy.
The movement of molecules in a substance depends on the space allotted for them or called the volume. More volume between molecules, easy to move apart.
Gaseous state is composed of molecules located far apart from each other and they diffuse easily. Therefore, motion in three states of water is different and moves faster in gaseous state.
To learn more about states of matter, refer the link below:
https://brainly.com/question/9402776
#SPJ2
Which of the following is a unit of length? O A. A liter O B. A kilogram C. A meter O D. A degree
Answer:
C.) A meter
Explanation:
The Density equation is:
Answer:
p=m/v
p equals density M equals mass and v = volume
Please help me help please help
Answer:
i don't know if Im converting it to newtons or picograms
Explanation:
in newtons the coefficient is 8.5 and the exponent is 2. sorry if i'm wrong
Question 1 of 10 What is the maximum number of electrons that can occupy one orbital?
A. 6
B. 8
C. 2
D. 1
Answer:
C. 2
Explanation:
Is a "wave function that describes properties characteristic of no more than two electrons in the vicinity of an atomic nucleus or of a system of nuclei as in a molecule."
Explain why a hydrogen atom doesn’t have a neutron in its nucleus.
Answer: Hydrogen does not contain neutron, because its nucleus is smallest in size which cannot accommodate any heavier neutron. It also makes hydrogen atom unstable in nature.
Explanation:
Reactivity, flammability, and the ability to rust are types of _________.
phase changes
reversible changes
physical changes
chemical properties
Answer:
chemical properties
Explanation:
so EZ
#1. Boyle's Law. A gas with a volume of 4.0 L at a pressure of 205 kPa is allowed to expand to a volume of 12.0 L.
What is the pressure in the container if the temperature remains constant? (Answer is 6.8 kPa).
I NEED TO FIND HOW YOU GET TO THAT ANSWER
The final pressure in the container if the temperature remains constant is 68.3 kPa.
Given the following data;
Initial volume, V1 = 4.0 liters Initial pressure, P1 = 205 kPa Final volume, V2 = 12.0 LitersTo find the final pressure in the container if the temperature remains constant, we would use Boyle's Law:
Mathematically, Boyle's law is given by the formula;
[tex]P_1V_1 = P_2V_2[/tex]
Where;
P1 is the original (initial) pressure. P2 is the final pressure.V1 is the original (initial) volume. V2 is the final volume.Substituting the values into the formula, we have;
[tex]205[/tex] × [tex]4 =[/tex] [tex]12P_2[/tex]
[tex]820 = 12P_2\\\\P_2 = \frac{820}{12}[/tex]
Final pressure, P2 = 68.3 kPa
Therefore, the final pressure in the container if the temperature remains constant is 68.3 kPa.
Read more: https://brainly.com/question/23882998
https://phet.colorado.edu/sims/html/collision-lab/latest/collision-lab_all.html
Answer:
its not pulling up ? ;(
Explanation:
MARKING BRAINLIEST!
Which of the following best defines velocity?
It is an object's speed at a specific point in time.
It is the total distance traveled over the total time.
It is the speed of an object in a specific direction.
It is a measure of how far an object moves in a certain time.
Answer:
3
Explanation:
The velocity is basically the speed + the direction of an object put into one quantity, velocity.
hope this helps, if not see me in the comments...
HOPE THIS HELPS BRAINLIEST PLZZ