Answer:
(b) 400 nm is the far ultraviolet (violet) in the visible spectrum
The shorter wavelengths are more likely to cause sunburn.
200 nm is probably too short to be transmitted by the atmosphere
how much electric power (in kw ) does the heat pump use to deliver 19.0 kj/s of heat energy to the house?
The electric power used by the heat pump to deliver 19.0 kJ/s of heat energy to the house is 3.50 kW.
To find out the electric power used by a heat pump to deliver 19.0 kJ/s of heat energy to the house, we need to use the formula: P = Q/t
where P is the electric power used, Q is the heat energy delivered, and t is the time taken to deliver that heat energy.
We know that Q = 19.0 kJ/s, but we don't know the time taken t, so we need to find that out.
The time t can be calculated using the formula:t = Q / m
where m is the rate of heat transfer of the heat pump.
We are given that the heat pump has a coefficient of performance of 3.5. This means that for every 1 kW of electric power used by the heat pump, it delivers 3.5 kW of heat energy to the house.
Therefore, the rate of heat transfer of the heat pump is:m = 3.5 kW / 1 kW = 3.5So, t = Q / m = 19.0 kJ/s / 3.5 kW = 5.43 s
Now that we know the time taken t, we can find out the electric power used P using the formula:P = Q/t = 19.0 kJ/s / 5.43 s = 3.50 kW
Therefore, the electric power used by the heat pump to deliver 19.0 kJ/s of heat energy to the house is 3.50 kW.
To learn more about electric power:
https://brainly.com/question/13948282#
#SPJ11
is the transfer of information between two or more points that are not connected by an electrical conductor?
Yes, the transfer of information between two or more points that are not connected by an electrical conductor is possible and is referred to as wireless communication.
Wireless communication involves the use of electromagnetic waves such as radio waves, microwaves, and infrared waves, to transmit data between two points without the need for physical contact or connection.
Wireless communication is used in various fields, such as broadcasting, radio communication, mobile communication, satellite communication, and Internet access. Wireless communication technology has revolutionized communication and enabled a wide range of applications, from wireless microphones to Wi-Fi networks, GPS tracking systems, Bluetooth connectivity, and cellular communication.
Wireless communication is an important component of the modern world and will continue to play a major role in the advancement of communication technology.
Therefore, the transfer of information between two or more points that are not connected by an electrical conductor is possible and is done through wireless communication.
To know more about wireless communication, refer here:
https://brainly.com/question/30490055#
#SPJ11
Our complete guide to US amusement parks delivers vacation ideas for those who enjoy eye-watering speeds, teeth-chattering descents and a g-force that relocates organs. We head to Coney Island to get shot in the air how far and how fast?
1. 100 feet at 75 mph
2. 200 feet at 75 mph
3. 50 feet at 90 mph
4. 150 feet at 90 mph
Answer:
100 feet at 75 mph.
What is mean by mph?mph expresses the speed or velocity in miles per hour. Speed means rate of change of distance with respect to time.
speed = distance/time
hence, distance = speed x time
The above equation is the relationship between distance, speed and time.
Coney Island is a famous destination known for its amusement parks, boardwalk, and beautiful beach.
One of its most popular attractions is the Thunderbolt, which is a steel roller coaster that gives riders a thrilling experience of high speeds, steep drops, and sharp turns.
The distance and speed at which riders get shot in the air on the Thunderbolt roller coaster are 100 feet and 75 mph, respectively.
This means that the ride launches riders at a height of 100 feet while travelling at a speed of 75 miles per hour.
This can be a scary experience, as the force of gravity can make riders feel like their organs are relocating.
To know more about velocity:
https://brainly.com/question/16743925?
#SPJ11
Using this circuit below, find the Norton's equivalent circuit about terminals a and b. Req and leg are the equivalent resistance and current used in the Norton's equivalent ciruict. V1 = 10 V, R1 = 4ohms, R2 = 8ohms „R₃ = 8ohms Select one: a. leq = -2.5 A, Req = 2 ohms b. leq = 2.5 A, Req = 2 ohms c. leq = 2.5 A, Req = 64 ohms d. leq = -2.5 A, Req = 12.8 ohms
The Norton's equivalent circuit and equivalent resistance of the given circuit is leq = 2.5 A, Req = 2 ohms. The correct answer is option b.
Norton's equivalent current, iNorton is calculated by dividing the voltage source by the series resistance of R2 and R3.
iNorton = V1 / (R2 + R3)
iNorton = 10 / (8 + 8)
iNorton = 0.625 A
Norton's equivalent resistance, RNorton is calculated by using the formula;
RNorton = R2 || R3
RNorton = (R2 x R3) / (R2 + R3)
RNorton = (8 x 8) / (8 + 8)RNorton = 4 ohms
Therefore, Norton's equivalent circuit is given by the current source of 0.625 A and the resistance of 4 ohms, connected across terminals a and b. The correct answer is option B; leq = 2.5 A, Req = 2 ohms.
To know more about equivalent resistance click here:
https://brainly.com/question/12286223
#SPJ11
the photo at right was taken through a spectroscope. what color was the pigment extract used to produce this spectrum?
The pigment extract used to produce the spectrum in the photo is not given, so the answer is undeterminable.
To create this spectrum, a spectroscope is used to disperse the colors from a specific pigment extract and separate them into their individual colors in the visible spectrum. The image given in the question is a spectrum that was taken through a spectroscope.
A spectroscope is a scientific instrument used to analyze the colors or wavelengths of light. It works by separating light into its component colors or wavelengths, which produces a spectrum. This spectrum can be used to identify the chemical composition of substances.
A pigment extract is a mixture of various pigments extracted from a substance. For example, a pigment extract from a plant would contain various pigments such as chlorophyll, carotenoids, and anthocyanins. The color of the pigment extract would depend on the type and concentration of pigments present in the extract.
In summary, without knowing the specific pigment extract used to produce the spectrum, it is impossible to determine the color of the pigment extract.
To know more about Pigment extract, refer here:
https://brainly.com/question/24963874#
#SPJ11
What is the mass of an object if a force of 30 N causes it to accelerate at 1. 5 m/s/s?
The mass of an object if a force of 30 N causes it to accelerate at 1. 5 m/s^2 is 11.33
Newton's second law results in force = mass times acceleration
17 = mass x 1.5
mass = 17/1.5
mass = 11.33
Force is a physical amount that describes the interplay between items. it's far a vector quantity, which means it has both magnitude and course. Force can cause an object to accelerate or change its shape. According to Newton's first law of motion, an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force.
Newton's second law of motion relates force to acceleration, stating that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Newton's third law of motion states that every action has an equal and opposite reaction, meaning that when two objects interact, they exert equal and opposite forces on each other. There are many types of forces, including gravitational, electromagnetic, frictional, and normal.
To learn more about Force visit here:
brainly.com/question/24115409
#SPJ4
the dimension of time is t. and the dimension of length is l. in dimensional analysis, what is the dimension of an acceleration?
The dimension of acceleration is L T⁻².
In the dimensional analysis, the dimension of acceleration is L T⁻² where L stands for length and T stands for time.
Acceleration can be defined as the rate of change of velocity over time. It can also be expressed as a vector quantity that indicates the change in the speed or direction of an object.
a=v/t
where v= change in velocity (m/s) and t= time (s)
In physics, dimensional analysis is a useful tool for checking the validity of a proposed equation or law. It is a way of expressing the units of physical quantities in terms of their fundamental dimensions. This process helps to identify the correct combination of dimensions for a particular physical quantity.
To know more about the "dimension of acceleration":
https://brainly.com/question/29755536
#SPJ11
We can set up the equation:
l * √2 = 24√2
dividing both sides by √2:
l = 24
so, the length of the frame is 24 units.
Let's denote the dimensions of the frame as length (l) and width (w). since the diagonal of the frame makes a 45-degree angle with one side, we can use the properties of a 45-45-90 right triangle to find the relationship between the diagonal and the sides.
in a 45-45-90 triangle, the sides are in the ratio 1:1:√2. since the diagonal of the frame is 24√2, it is the hypotenuse of a 45-45-90 triangle.
according to the ratio, the hypotenuse (diagonal) is √2 times the length (l) of the side. since the frame is rectangular, the width (w) would be the same as the length (l).
Learn more about dimensions here:
https://brainly.com/question/31106945?referrer=searchResults
#SPJ11
a bicycle wheel has a radius of 0.304 m and a rim whose mass is 2.50 kg. the wheel has 50 spokes, each with a mass of 0.0100 kg. (a) calculate the moment of inertia of the rim about the axle. (b) determine the moment of inertia of any one spoke, assuming it to be a long, thin rod that can rotate about one end. (c) find the total moment of inertia of wheel, including the rim and all 50 spokes.
The moment of inertia of the bicycle wheel with radius of 0.304m and 50 spoke, rim with mass 2.50 kg for rim about the axle is 0.229 kg·m² , moment of inertia of any one spoke is 0.00186 kg·m² and moment of inertia of the wheel, including the rim and all 50 spokes is 0.592 kg·m².
(a) The moment of inertia of the rim about the axle, we use the formula for the moment of inertia of a thin hoop.
We substitute the mass of the rim and the radius of the wheel into the formula and get the moment of inertia of the rim
The moment of inertia of the rim about the axle:
[tex]I_{rim} = MR^2[/tex]
where M is the mass of the rim and
R is the radius of the wheel.
Substituting the given values, we get:
[tex]I_{rim} = (2.50 kg) *(0.304 m)^2 = 0.229 kg*m^2[/tex]
Therefore, the moment of inertia of the rim about the axle is 0.229 kg·m².
(b) The moment of inertia of any one spoke, we use the formula for the moment of inertia of a long, thin rod rotating about one end.
We substitute the mass of the spoke and its length into the formula and get the moment of inertia of one spoke.
[tex]I_{spoke} = (1/3)ML^2[/tex]
where M is the mass of the spoke and
L is its length.
Substituting the given values, we get:
[tex]I_{spoke} = (1/3) *(0.0100 kg)*(2 * 0.304 m)^2= 0.00186 kg*m^2[/tex]
Therefore, the moment of inertia of any one spoke is 0.00186 kg·m².
(c) The total moment of inertia of the wheel, we use the parallel axis theorem.
The moment of inertia of the wheel about the center of mass is given by:
[tex]I_{center} = I_{rim} + 50*I_{spoke}[/tex]
Substituting the values we found in parts (a) and (b), we get:
[tex]I_{center} = 0.229 kg*m^2 + 50 * 0.00186 kg*m^2 = 0.324 kg*m^2[/tex]
The distance between the center of mass and the axle is equal to the radius of the wheel, so we can use the parallel axis theorem to find the total moment of inertia:
[tex]I_{total} = I_{center} + Md^2[/tex]
where M is the total mass of the wheel (rim plus spokes) and
d is the distance between the center of mass and the axle.
Substituting the given values, we get:
M = 2.50 kg + 50 × 0.0100 kg = 3.00 kg
d = 0.304 m
[tex]I_{total} = 0.324 kg*m^2 + (3.00 kg) *(0.304 m)^2= 0.592 kg*m^2[/tex]
Therefore, the total moment of inertia of the wheel, including the rim and all 50 spokes, is 0.592 kg·m².
To learn and practice more questions for 'moment of inertia':
https://brainly.com/question/3406242
#SPJ11
when two objects are charged by a charge-separating process or device, how are their charges related?
When two objects are charged by a charge-separating process or device, their charges are related in such a way that the total amount of charge in the system is conserved.
This is known as the principle of conservation of charge.
This principle states that the total amount of electric charge in an isolated system is always conserved,
that is, it cannot be created or destroyed but can only be transferred from one object to another or from one form to another.
The charge-separating process involves the transfer of electrons from one object to another, resulting in a buildup of charge on one object and a deficiency of charge on the other.
This process can occur due to a number of reasons, such as rubbing two objects together, or bringing them in contact with a charged object, or by inducing a charge on an object by bringing it close to a charged object.
The charges on the two objects can be either positive or negative, depending on the nature of the charge-separating process.
For example, when two objects are rubbed together, electrons may transfer from one object to another, resulting in a buildup of negative charge on one object and a deficiency of negative charge on the other.
The charges on the two objects are opposite in sign, and the total amount of charge in the system is conserved.
When two objects are brought in contact with a charged object, the charge on the charged object is transferred to the uncharged objects,
resulting in a buildup of charge on one object and a deficiency of charge on the other. In this case, the charges on the two objects are of the same sign, and the total amount of charge in the system is conserved.
The charges on two objects that are charged by a charge-separating process or device are related in such a way that the total amount of charge in the system is conserved.
The charges on the two objects can be either positive or negative, depending on the nature of the charge-separating process, and can be of the same or opposite sign.
to know more about charge refer here:
https://brainly.com/question/3412043#
#SPJ11
The weather forecaster predicts that today's high will be 85. Which temperature scale is being used?
The Fahrenheit scale is most likely in use.
What is temperature?The average kinetic energy of the particles in a substance or object is measured by its temperature. It is a physical measure that expresses how hot or cold an object is in relation to a standard. Although Fahrenheit (°F) or Celsius (°C) are more frequently used to measure temperature than the SI unit of Kelvin (K), respectively.
The freezing and boiling points of the Fahrenheit scale, which is frequently used in the US, are 32°F and 212°F, respectively. In contrast, most other countries of the world use the Celsius scale, which has freezing and boiling values of 0°C and 100°C, respectively. The freezing and boiling points of the Kelvin scale, which is used to measure temperature, are 273.15 K and 373.15 K, respectively.
To know more about temperature, visit:
brainly.com/question/15267055
#SPJ1
A wheel and axle is like a screw.
A- True
B- False
in a billiards game, the white cue ball hits the black ball, moving the black ball to the right while the cue ball moves to the left. if the action force is applied by the cue ball to the black ball, which force is the reaction force?
If the white cue ball hits the black ball and moves the black ball to the right while the cue ball moves to the left, the action force applied by the cue ball to the black ball is the force applied to the black ball by the cue ball.
Thus, the correct answer is the force applied to the black ball by the cue ball (C).
Newton's Third Lаw of Motion explаins thаt forces аlwаys come in аction-reаction pаirs. The Third Lаw stаtes thаt for every аction force, there is аn equаl аnd opposite reаction force. In a billiards game, the white cue ball exerts а force on the bаlls. This is the аction force. The bаll exerts аn equаl аnd opposite force on the bаt.
The white cue ball forces the black bаll in one direction аnd the white cue ball forces the bаll in the opposite direction. The two forces creаte аn interаction pаir on different objects аnd аre equаl in strength аnd opposite in direction. The force (F) of A (the white cue ball) on B (the black bаll) is equаl in mаgnitude аnd opposite in direction of the force of B on А: F(А on B) = - F(B on А).
Your question is incomplete, but most probably your figure in the Attachment and the options were
A. the force of gravity on the cue ball
B the friction applied by the table to the cue ball
C, the force applied to the black ball by the cue ball
D. the force applied by the stick to the cue ball
Thus the correct option is C.
For more information about action force refers to the link: https://brainly.com/question/13186730
#SPJ11
the boundary between two adjacent air masses is called the boundary between two adjacent air masses is called an air strip. a front. entrainment. adiabatic.
A front is the line separating two contiguous air masses. Two air masses having differing characteristics, such as temperature, humidity, and density, collide and interact in a small area known as a front.
Cold fronts, warm fronts, stationary fronts, and occluded fronts are the four primary types of fronts. As a cold front enters a region, it pushes the warm air mass out of the way, resulting in a sharp drop in temperature and frequently severe weather. On the other hand, when a warm front approaches a region, it forces the cold air mass out of the way, causing the air to gradually warm up and increasing the likelihood of rain or drizzle. When two weak air masses collide, stationary fronts develop. enough to push the other out of the way, resulting in a stationary boundary between them. Occluded fronts occur when a cold front overtakes a warm front, lifting the warm air mass above the ground and forming a new boundary between the cold air behind the cold front and the cool air ahead of the warm front.
learn more about front here:
https://brainly.com/question/1603948
#SPJ4
a patent clerk in a spaceship observes that time on the clock of an astronaut on a spaceship passing at 0.25c runs slower than does time on his own clock. this phenomenon is called
The phenomenon that occurs when the time on the clock of an astronaut on a spaceship passing at 0.25c runs slower than does time on a patent clerk's clock is called time dilation.
Time dilation:Time dilation is a phenomenon in which time passes at a slower rate for an observer in relative motion compared to a stationary observer, as predicted by the theory of relativity.
It also is a consequence of the theory of relativity, which predicts that time appears to run slower for objects that are moving relative to an observer.
In this case, the astronaut's clock appears to be running slower than the patent clerk's clock because the astronaut is moving relative to the patent clerk.
This effect becomes more pronounced as the speed of the spaceship approaches the speed of light.
At speeds close to the speed of light, time dilation becomes significant and can have practical implications, such as the need for correction factors in GPS systems that account for the time dilation effects of satellites in orbit.
To know more of "theory of relativity":
https://brainly.com/question/22428322
#SPJ11
an old-fashioned single-play vinyl record rotates on a turntable at 45 rpm. what are (a) the angular velocity in rad/s and (b) the period of the motion in seconds?
(a) The angular velocity is 4.71 rad/s
(b) The period of motion is 0.013 seconds.
(a) The angular velocity (ω) of an object rotating at a certain speed can be calculated using the formula:
ω = (2π × frequency)/number of revolutions
Here, the record is rotating at 45 revolutions per minute (RPM), which is equivalent to 0.75 revolutions per second. Therefore, the angular velocity can be calculated as:
ω = (2π × 0.75 rev/s)/1 = 4.71 rad/s
(b) The period (T) of the motion is the time it takes for the record to make one complete revolution. It can be calculated using the formula:
T = 1/frequency
Here, the frequency is 45 RPM, which is equivalent to 0.75 Hz. Therefore, the period can be calculated as:
T = 1/0.75 Hz = 0.013 seconds
Therefore, the angular velocity of the record is 4.71 rad/s and the period of the motion is 0.013 seconds.
To know more about angular velocity click here:
https://brainly.com/question/30885221
#SPJ11
a force of pounds is required to hold a spring stretched 0.3 feet beyond its natural length. how much work (in foot-pounds) is done in stretching the spring from its natural length to 0.7 feet beyond its natural length?
A force of 7 pounds is needed to maintain a spring stretched 0.4 feet beyond its natural period. A 8.575 foot-pounds work (in foot-pounds) is done in stretching the spring from its natural length to 0.7 feet beyond its natural length.
Work done:
W = F x d
where F is force applied and d distance of the movement from problem statement we have
d = 0.7 ft
We additionally know that the spring became stretched 0.4 ft whilst a force of 7 pounds turned into carried out consequently k the regular of the spring is
F = K x s
k = F/s
⇒ k = 7/0.4
⇒ k = 17.5 pounds/feet
Now to transport from unique condition of the spring as much as 0.7 feet we want a force of
F = k x s
⇒ F = 17,5 pounds/feet * 0.7 feet
⇒ F = 12.25 pounds
And finally the work
W = 12.25 x 0.7 = 8.575 foot-pounds
W = 8.575 foot-pounds
Force is a fundamental concept in physics that describes the influence that one object has on another, causing it to accelerate or change its state of motion. Force can be defined as a push or pull on an object resulting from the interaction between two or more objects. It is measured in units of Newtons (N).
The force acting on an object can be influenced by a variety of factors, including the mass of the object, the velocity of the object, and the nature of the interaction between the objects. Forces can be categorized as contact forces or non-contact forces. Contact forces involve direct physical contact between two objects, while non-contact forces act at a distance and are mediated by fields such as electromagnetic or gravitational fields.
To learn more about Force visit here:
brainly.com/question/24115409
#SPJ4
Complete Question: -
A force of 7 pounds is required to hold a spring stretched 0.4 feet beyond its natural length. How much work (in foot-pounds) is done in stretching the spring from its natural length to 0.7 feet beyond its natural length?
which of the following statements are true of the quantity mass? list all that apply. a. the mass of an object is dependent upon the value of the acceleration of gravity. b. the standard metric unit of mass is the kilogram. c. mass depends on how much stuff is present in an object. d. the mass of an object is variable and dependent upon its location. e. an object would have more mass on the top of mount everest than the same object at the foot of the mountain. f. people in weight watcher's are really concerned about their mass (they're mass watchers). g. the mass of an object can be measured in pounds. h. if all other variables are equal, then an object with a greater mass would have a more difficult time accelerating. i. if all other variables are equal, then it would require less exerted force to stop a less massive object than to stop a more massive object. j. the mass of an object is mathematically related to the weight of the object.
The statement F. "people in weight watcher's are really concerned about their mass (they're mass watchers)" is incorrect and the statement G. "the mass of an object can be measured in pounds" is also incorrect, as mass is typically measured in kilograms or grams.
The following statements are true of the quantity mass: a. the mass of an object is dependent upon the value of the acceleration of gravity; b. the standard metric unit of mass is the kilogram; c. mass depends on how much stuff is present in an object; d. the mass of an object is variable and dependent upon its location; e. an object would have more mass on the top of mount everest than the same object at the foot of the mountain; h. if all other variables are equal, then an object with a greater mass would have a more difficult time accelerating; i. if all other variables are equal, then it would require less exerted force to stop a less massive object than to stop a more massive object; and j. the mass of an object is mathematically related to the weight of the object.
The statement "people in weight watcher's are really concerned about their mass (they're mass watchers)" is incorrect and the statement "the mass of an object can be measured in pounds" is also incorrect, as mass is typically measured in kilograms or grams.
For more such questions on quantity mass
https://brainly.com/question/29257796
#SPJ11
a velocity vector has a magnitude of 22.0 m/s . if its y component is -12.0 m/s , what are the possible values of its x component?
The possible values of the x component of the velocity vector are ±18.44 m/s.
The velocity vector has a magnitude of 22.0 m/s and a y-component of -12.0 m/s. To determine the possible values of its x-component, we can use the Pythagorean theorem.
According to the theorem, the magnitude of a vector (a² + b² = c²) can be determined by the sum of the squares of its components.
In this case, c² = 22², a² = x², and b² = -12². This can be rearranged to solve for x:
x² = c² - b² = 22² - (-12)² = 340
⇒ x = √340 = ±18.44 m/s.
Therefore, the x-component of the vector is either +18.44 m/s or -18.44 m/s.
To know more about velocity vectors, refer here:
https://brainly.com/question/13492374#
#SPJ11
Electric circuit
ohm's law
The equation to determine the ohms law of the electrical circuit is given as V = IR.
Ohm's law is used to find the characteristics of an electrical circuit. it is used to find the current flowing through an electrical circuit, to determine the voltage of the battery connected to the circuit, and to find how much resistance is in the circuit.
The equation for the ohms law is V = IR. where ;
I = the current flowing through the electrical circuit.
V = voltage of the battery connected to the circuit.
R = resistance in the electrical circuit.
to learn more about ohm's law:
https://brainly.com/question/19892453
How to calculate the ohms law in an electrical circuit?
What is the transfer of thermal energy away from an object called?
Answer:
convection is the answer
Explanation:
good luck on your assignment <3
if we monitor a point on a wire where there is a current for a certain time interval, which gives the chargef that moves through the point in that interval?
When we monitor a point on a wire where there is a current for a certain time interval, we obtain the amount of charge that passes through the point in that interval.
What is electric current?An electric current is defined as the flow of electric charge through a conductor.
A wire carrying an electric current must have an overall electric charge. It is observed that when electric charges move through a conductor, the charges are propelled by an electromotive force (EMF).
Electric chargeThe most fundamental concept in electricity is electric charge. A charge is a property of all matter that is either negative or positive.
In matter, electric charges are balanced. An electric charge accumulates on an object when its electrons and protons are not in balance.
When the number of electrons in an object surpasses the number of protons, the object is negatively charged. The object is positively charged when the number of protons exceeds the number of electrons.
Ampere is the SI unit of electric current. When one coulomb of electric charge passes a given point per second, an electric current of one ampere is said to be flowing.
Mathematically, 1A = 1C/s. Therefore, the current passing through a point on a wire for a certain time interval provides us with the amount of charge that passes through that point in that interval.
To know more about Current refer here:
https://brainly.com/question/9682654#
#SPJ11
from the results, was there a good agreement between the experimental acceleration and the theoretical (expected) acceleration? what causes the difference? discuss sources of experimental uncertainty for this experiment
Repeating the experiment multiple times and averaging the results can help reduce measurement errors and improve accuracy.
Acceleration is a physical quantity that describes the rate at which the velocity of an object changes over time. If an object is moving in a straight line, acceleration can be positive or negative depending on whether the object is speeding up or slowing down. If the object is turning or changing direction, acceleration is not only a change in speed but also a change in direction.
The most common formula to calculate acceleration is [tex]a = (v_f - v_i) / t,[/tex]where "a" is acceleration, "[tex]v_f[/tex]" is the final velocity of the object, "[tex]v_i[/tex]" is the initial velocity of the object, and "t" is the time interval during which the velocity changes.
To learn more about Acceleration visit here:
brainly.com/question/12550364
#SPJ4
if a 10 meter wire is swung in a circle and it takes 0.8 seconds for the wire to come all the way around, what is the speed that is experienced by light bulb a
The speed that is experienced by light bulb is same as the speed of the wire as it is swung in a circle is approximately 78.5 m/s.
The speed of the wire can be calculated using the formula:
v = 2πr / t
where v is the speed of the wire, r is the radius of the circle (which is equal to the length of the wire in this case), and t is the time it takes for the wire to complete one revolution.
Substituting the given values, we get:
v = 2π(10 m) / 0.8 s
v = 78.5 m/s
Therefore, the speed of the wire as it is swung in a circle is approximately 78.5 m/s.
What is speed?
Speed is the measure of how quickly an object moves. It is defined as the distance traveled by an object per unit of time. The SI unit of speed is meters per second (m/s), although other units such as miles per hour (mph) or kilometers per hour (km/h) are also commonly used.
Mathematically, speed is represented as:
speed = distance / time
To know more about speed, visit:
https://brainly.com/question/28224010
#SPJ1
what is unusual about the position of uranus and neptune in the nice model of solar system formation?
Uranus and Neptune are unusual in the Nice model of solar system formation because they are in different regions than the other planets.
The Nice model proposes that the giant planets formed much further from the Sun than the inner planets.
Specifically, Uranus and Neptune are thought to have formed at a distance of 5-20 AU, much farther than the other planets.
They are also thought to have moved outwards from this region, and then migrated back inwards to their current positions.
This outward migration is known as "jumping Jupiter", as it was caused by the gravitational influence of Jupiter.
Uranus and Neptune are also thought to have been affected by the orbits of two hypothetical planets called "Phaeton" and "Tyche".
The presence of these planets, which are no longer believed to exist, would have affected the orbits of the two outermost planets, resulting in them having the highly inclined orbits they currently possess.
Uranus and Neptune are unusual in the Nice model of solar system formation because they are in different regions than the other planets,
And their orbits are thought to have been affected by the gravitational influence of Jupiter and two hypothetical planets, Phaeton and Tyche.
to know more about solar system refer here:
https://brainly.com/question/12075871#
#SPJ11
describe the relative intensity of sound produced by the tuning fork as detected by the plugged and unplugged ears
The relative intensity of sound produced by the tuning fork will be higher when detected by plugged ears, and lower when detected by unplugged ears.
When detected by plugged ears, the intensity of sound produced by the tuning fork will be higher due to the fact that the sound waves are unable to escape and are instead reflected back into the ear canal. This is because the ear canal is blocked off, creating a closed system and thus more intense sound waves.
Conversely, when detected by unplugged ears, the intensity of sound produced by the tuning fork will be lower as the sound waves are able to escape the ear canal. This is because the ear canal is open, creating an open system and thus less intense sound waves.
for such more question on intensity of sound
https://brainly.com/question/17062836
#SPJ11
a large air-filled 0.297-kg plastic ball is thrown up into the air with an initial speed of 11.7 m/s. at a height of 2.87 m, the ball's speed is 2.87 m/s. what fraction of its original energy has been lost to air friction?
The fraction of the ball's original energy that has been lost to air friction is 20%.
The ball's original energy can be calculated by using the equation E = 0.5*m*v², where m is the mass and v is the velocity.
The original energy of the ball is thus 0.297 * 11.72 = 41.2 Joules.
To calculate the amount of energy lost, we need to use the equation E = 0.5*m*v2 again. The ball's velocity at a height of 2.87 m is 2.87 m/s, so the energy lost to air friction is:
0.297 * 2.872 = 8.28 Joules.
Finally, the fraction of energy lost can be calculated by dividing the energy lost by the original energy.
the fraction of energy lost = 8.28/41.2
the fraction of energy lost = 0.20
the fraction of energy lost = 20%.
Therefore, the fraction energy is 20%.
Learn more about fraction energy at https://brainly.com/question/30355539
#SPJ11
cellular phones use radio waves to transmit information. if your cell phone uses a frequency of 1800 mhz , what is the wavelength of the electromagnetic radiation emitted by your phone?
The wavelength of the electromagnetic radiation emitted by your cell phone, which uses a frequency of 1800 MHz, is approximately 166 meters.
Radio waves are a type of electromagnetic radiation, which are made up of electric and magnetic fields. These fields oscillate, or vibrate, at a certain frequency and travel at the speed of light.
The wavelength of a radio wave is the distance between two points in the wave where the electric and magnetic fields are in the same direction.
It is determined by the equation wavelength = speed of light divided by frequency.
Therefore, the wavelength of the electromagnetic radiation emitted by your cell phone is calculated by dividing the speed of light (299,792,458 meters per second) by its frequency of 1800 MHz, which is equal to 166 meters.
To know more about electromagnetic radiation click on below link:
https://brainly.com/question/10759891#
#SPJ11
explain the use of air bags and seat belts in terms of momentum and impulse. please provide examples (and calculations) to elaborate your concepts.
Answer:
Explanation:
A seatbelt is designed to stretch a bit when the car decelerates rapidly. You travel forward a little while being stopped - you do not stop sharply as you would if you hit the dashboard. The seatbelt stretching increases the time over which your momentum is changed, thereby decreasing the force experienced by your body.
Airbags are made from a strong coated fabric. They are stored in a module mounted on the steering wheel and dashboard and side panels of the car. The inflation of them is initiated by crash sensors that activate upon impact at speeds of more than 10-15 miles per hour. They are mounted in several locations on the car body. In a crash, the sensor sends an electrical signal to the airbag which then causes the airbag to deploy. It ignites a chemical propellant which produces nitrogen gas, which then inflates the bag itself.
an antenna will propagate rf energy in specific radiation patterns, both horizontally and vertically. how do antenna manufacturers identify the horizontal radiation patterns?
Antenna manufacturers identify the horizontal radiation patterns of an antenna by performing tests in a special chamber known as an anechoic chamber.
This chamber is designed to eliminate any unwanted reflections or echoes of the radio waves, which allows the antenna to be tested in a controlled environment. Tests typically involve the antenna being rotated while the amount of radio frequency energy received by the antenna is measured.
Antenna manufacturers identify the horizontal radiation patterns by measuring the E- and H-plane patterns. To obtain a specific radiation pattern, the manufacturers use different design techniques. The different design techniques that are used by manufacturers to obtain a specific radiation pattern are Waveguide radiating slots. Dipoles and monopoles.Printed dipole antennas.Omnidirectional antennas.
Read more about anechoic :
https://brainly.com/question/19820088
#SPJ11
100 POINTS AMD BRAINLIEST
Look at the image for the question, I really need help :(
The first blank is either:
Rachel! Brett
Second blank is:
greater, lesser
Third blank is either:
greater the masses of the two objects, the more the attraction between the objects
greater the masses of the two objects, the less attraction between the objects
smaller the masses of the two objects, the more the attraction between objects
Answer:
1. Rachel
2. greater
3. greater the masses of the two objects, the more the attraction between the objects