Forces acting upon a 100-kg crate sliding down an inclined plane, the plane is inclined at an angle of 30 The coefficient of friction between the crate and the incline is 0.3. Determine the net force of the crate. Use: g=10m/s, Sin30°=0.5, and Cos30°=0.9 A) 300N B) 200N C) 100N D)230N​

It also assumes that many of your portrait are in focus. A wide aperture setup admits so much light into to the lens and lessens the depth of field.

A cameras is a piece of equipment that takes pictures and comprises of either a plate or light-sensitive film inside of a light-proof casing. The camera's shutters opens and closes during the taking of a picture, exposed the photosensitive film to sight and recording the scene on the film.

The traditional camera depicted in the illustration has been largely replaced by digital cameras and mobile phones today.

Less light enters the lens through a tiny aperture. Additionally, it suggests that more your photo will be sharp. More light enters the lens when the aperture is wide open, but the field of view is also reduced. You can change the aperture setting to help balance overall exposure and control the amount of the composition is already in focus.

To learn more about camera follow the given link:

brainly.com/question/7825772

#SPJ4

Explanation:

Let a be the sphere of mass 10 kg and b be the sphere of mass 20 kg. According to Newton's universal law of gravitation, the gravitational force of a on b is expressed as:

F

a

b

=

G

m

M

d

2

, where:

G

=

6.67

×

10

−

11

N

m

2

/

k

g

2

is the gravitational constant

m = 2 kg is the mass of a

M = 10 kg is the mass of b

d = 0.2 m is the separation between the two spheres

So:

Fab=GmMd26.67

×

10

−

11

×

2

×

10

0.2

2

The correct option is A, the Sun's path, as viewed from the equator, is highest in the sky on the spring and fall equinoxes.

Fall equinox is an astronomical event that marks the transition from summer to autumn in the Northern Hemisphere and from winter to spring in the Southern Hemisphere. On the day of the fall equinox, the sun rises directly in the east and sets directly in the west. This marks the end of the summer season and the beginning of the autumn season. During the fall equinox, all areas of the Earth experience nearly the same amount of daylight and darkness.  

The fall equinox occurs in the middle of September in the Northern Hemisphere and in the middle of March in the Southern Hemisphere. It is the first day of autumn and the last day of summer in the Northern Hemisphere and the first day of spring and the last day of winter in the Southern Hemisphere.

The fall equinox marks the return of balance after the summer solstice, during which the days are the longest and the nights are the shortest. During the fall equinox, the day and night are of equal length and the sun is directly over the equator. After the fall equinox, the days become gradually shorter and the nights become gradually longer.

To learn more about Fall equinoxes visit here:

brainly.com/question/907434

#SPJ4

Answer:33Ns

Explanation:

The potential energy of Nan suitcase of mass 14 kg is 54.88 J.

Potential energy is the energy of a body due to its position in the gravitational field.

To calculate the potential energy, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the potential energy is 54.88 J.

Learn more about potential energy here: https://brainly.com/question/14427111

#SPJ1

The baseball's momentum will be 2.75 m/s in magnitude. This is the accurate answer to the given problem.

Momentum and velocity are different in that momentum is a measurement of an object's amount of motion, whereas velocity is a measurement of an object's speed with direction. Velocity is one of the components of momentum since momentum is equal to an object's mass multiplied by its speed.

p = m v . The equation demonstrates that momentum is directly related to an object's mass (m) and velocity (v). As a result, an object's momentum increases with increasing mass or velocity. The momentum of a large, swift object is larger than that of a small, slower object.

P initial = (145g) x (45 m/s) = 6525 g*m/s

F = 0-6525/1.0s = -6525N

To learn more about momentum visit:

brainly.com/question/24030570

#SPJ4

You are standing on a moving bus, facing forward. You suddenly fall backward. You can imply from this that the bus's acceleration or speed has increased suddenly.

When the bus accelerates or speeds up suddenly, the inertia of your body causes you to fall backward. Inertia is the tendency of a body to resist changes in its state of motion. It is a basic principle of physics that states that an object in motion will remain in motion with the same speed and the same direction unless acted upon by an outside force. When the bus accelerates suddenly, the inertia of your body causes you to remain in the same position, while the bus moves forward. This results in you falling backward.

To know  more about acceleration  refer to the  link brainly.com/question/2303856

#SPJ4

The three laws of motion, as described by Sir Isaac Newton, are as follows:

Every object in a state of uniform motion will remain in that state of motion unless an external force acts on it. This is known as the law of inertia.

The force acting on an object is equal to the mass of that object multiplied by its acceleration. This is known as Newton's second law of motion, and is often represented by the equation F = ma.

For every action, there is an equal and opposite reaction. This is known as Newton's third law of motion.

Newton's laws of motion are fundamental principles that describe the physical behavior of objects in motion. The first law, the law of inertia, states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity, unless acted upon by a net external force. The second law of motion, states that the acceleration of an object is directly proportional to the net force acting on the object, and inversely proportional to its mass. The third law states that for every action there is an equal and opposite reaction.

To know more about laws of motion  click below:

https://brainly.com/question/29775827#

#SPJ4

Answer:

15 seconds :)

Explanation:

Answer:

(A) A pitch that is higher than the pitch actually produced

Explanation:

Doppler effect

Answer:

The Difference Between the final and initial position of a point trajectory

Answer:

If an object moves relative to a reference frame

Explanation:

If a professor moves to the right relative to a whiteboard, or a passenger moves toward the rear of an airplane then the object's position changes.

plz give brainlest btw my in.sta is sk8ercj plz follow!!

Answer:

46.98 kg m/s

Explanation:

P = mv

P = 5.8*8.1 = 46.98 kg m/s

Answer:

1. B

2. B

3. D

4. A

Hope this was correct! A lot of the answers are already in the article itself and the wording is just different. I suggest now that for information retainment, you read the article again with the correct points in mind and see if you can spot the points where the answers are stated!

A human lifetime of 80 years is equal to 29,200,000 seconds.

The average human lifetime is typically 79 years, although this can vary greatly depending on various factors such as lifestyle, genetics, and environment. Generally, most people can expect to live anywhere from their late 60s to their mid-80s. However, some people live much longer, and some much shorter. Even within the same family, the range of lifespans can be quite varied.

This can be calculated by multiplying the number of seconds in a day (86,400) by the number of days in a year (365) by the number of years in a human lifetime (80).
86,400 x 365 x 80 = 29,200,000 seconds

To learn about more human lifetime.
https://brainly.com/question/11105393
#SPJ4

Explanation:

The total resistance Rt is given by

1/Rt = 1/Ra + 1/Rb + 1/Rc = 1/5 + 1/4 + 1/7 = 0.593

or Rt = 1.69 ohms

The total current I running through the circuit is

I = V/Rt = 2.37 A

C. heat from radioactive decay.

Jupiter is a large gas giant and does not have a solid surface so the source of its heat is not from contraction or tidal heating.

Heat is generated from the radioactive decay of elements, such as uranium and thorium, in the interior of Jupiter which is the most likely explanation for the release of heat.

The heat released from the interior of Jupiter is believed to be generated from the radioactive decay of elements, such as uranium and thorium. These elements are naturally occurring, and their decay releases energy in the form of particles and radiation. This process produces the heat that is released from Jupiter's interior, which is why it is much hotter than the surrounding environment. The heat is also responsible for the hot spot that can be seen in Jupiter's atmosphere. It is estimated that the interior of Jupiter releases up to two and a half times more heat than it receives from the Sun. This process of radioactive decay is the most likely explanation for the release of such a large amount of heat from Jupiter's interior.

learn more about heat here

https://brainly.com/question/14515276

#SPJ4

The interval by which the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

The factor by which the office noise is related to the standard threshold of hearing is given by x = 10^(d/10), where d is the sound intensity in decibels. Since the decibel reading was consistently above 50 but never above 70, we can calculate the range of x using the following:

50 < d <= 70

10^(50/10) < x <= 10^(70/10)

To find the range of x, we need to calculate the 10^(50/10) and 10^(70/10)

10^(50/10) = 10^5 = 100000

10^(70/10) = 10^7 = 10000000

Therefore, the range of x, the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

Learn more about Threshold value here: https://brainly.com/question/726252

#SPJ4

Your question is incomplete but most probably the complete question is:

Sound intensity, in decibels, d, can be written using a comparison factor, x, that compares sound intensity to the standard threshold of hearing. d = 10log(x) A sensor measures the sound intensity, in decibels, of an office over time. The decibel reading was consistently above 50, but never above 70. On what interval is the factor by which the office noise is related to the standard threshold of hearing? (17, 18.5) (17, 18.5] (100,000, 10,000,000] (100,000, 10,000,000)

Answer:

W = 176.4 N

Explanation:

Given that,

The mass of a bowling ball, m = 18 kg

We need to find the weight of the bowling ball on Earth's surface. The weight of an object on the surface of Earth is given by :

W = mg

Where

g is the acceleration due to gravity

Put all the values,

W = 18 × 9.8

W = 176.4 N

So, the weight of the ball on Earth's surface is equal to 176.4 N.

The object's momentum will vary by an amount equal to 80 N-s.

Describe momentum.

The relationship between a particle's mass and velocity determines its momentum. Having both a force and motion, it has both a direction and a magnitude. The force exerted on a particle is equal to the rate at which its momentum is gaining momentum over time, according to Isaac Newton's second equation of motion.

Newton's second law states that if a steady force acts on a particle for a predetermined period of time, the impulse, which is the result of the force and the intervals (the impulse), is equal to the change in momentum.

The time it would take a constant action to bring a particle to rest, on the other hand, is the measure of a particle's momentum.

According to the details in the query,

The system's starting momentum is 0.

F = ma

a = F/m

a = 10/6

a = 1.67 m/s²

utilize the motion equation,

v = u + at

v = u + (1.67)(8) (8)

v = 13.33 m

The momentum will then be,

p = mv

p = 6 × 13.33

p = 80 N-s.

To learn more about Momentum from given link

https://brainly.com/question/27020102

#SPJ4

Answer:

Explanation:

We've got m = 53 kg and a = g = 9.81 m/s^2. So to find the force we must do the following:

F = mg

F = (53kg)(9.81 m/s^2)

F = 520 N

The end product when equilibrium is reached is a mixture of water and ice at a temperature of 0°C.

Since the temperature of the water is higher than the temperature of the ice, the ice starts to melt and the temperature of the mixture decreases until it reaches the freezing point of 0°C.

The amount of water in the mixture increases due to the melting of the ice while the amount of ice decreases until all of the ice has melted and there is 1.4 kg of water in the mixture.

The heat energy that was released when the ice melted is absorbed by the water, raising its temperature to 0°C and causing it to reach equilibrium.

Learn more about equilibrium:

https://brainly.com/question/19340344

#SPJ4

Answer:

A micrometer caliper.

...............

Answer:

Reliable predictions require precursors – some kind of signal in the earth that indicates a big quake is on the way. The signal has to happen only before large earthquakes and it has to occur before all big quakes. At the moment seismologists have failed to find those precursors – if they even exist.

The total horizontal force on the driver if the translational velocity around the same curve is 18 m/s is 215 N.

The word 'force' has a precise meaning. At this level, it is completely appropriate to describe a force as a push or a pull. A force is not something that an object contains or 'has in it'.

In  ∑F=m rv 2,

both m and r are unknown but remain constant.

Symbolically,

write ∑F slow​ =( r m​ )(14.0m/s) 2  

and ∑F fast​ =( r m​ )(18.0m/s) 2

Therefore, ∑F is proportional to v 2  and increases by a factor of ( 14.018.0​ ) 2  

as v increases from 14.0m/s to 18.0m/s.

The total force at the higher speed is then

∑F fast​ =( 14.018.0​ )

2 ∑F slow​ =( 14.018.0​ ) 2 (130N)

=215N

To know more about force visit:

brainly.com/question/13191643

#SPJ4

Increasing internet speed and bandwidth will help to solve the latency issues. You'll need a network connection with a minimum speed of 15 mbps in order to use the internet efficiently.

Eventually, purchasing faster gear will be your best bet for obtaining lower latency. The system's overall latency can be considerably decreased by a faster CPU and GPU. Using the Reflex SDK's Game and Render latencies in games: If your Game Latency is excessive, think about getting a faster CPU.

In general, a latency (or ping) of 40 to 60 milliseconds (ms) or less is considered acceptable, whereas a speed of more than 100 ms will typically result in a significant lag in gaming. The performance of the game is affected by a number of variables.

the GPU, the HDD or SSD that the game is installed on, the amount and speed of RAM, the number of processing cores, and the speed of the disc.

To learn more about latency visit:

brainly.com/question/14894222

#SPJ4

The object travelled 63 meters at 9m/s for 7 seconds.

The length of the trajectory taken between the initial and final positions of the moving body is the distance traveled.

To calculate the distance traveled by an object traveling horizontally off a cliff, you can use the formula:

d = v * t

where d is the distance traveled, v is the velocity (9 m/s), and t is the time (7 seconds).

By substituting the given values into the formula, we get:

d = 9 * 7 = 63 meters

So, the object traveled 63 meters horizontally before it hit the ground after being launched off the cliff at 9 m/s for 7 seconds.

To know more about distance, visit:

brainly.com/question/13034462

#SPJ1

The independent variable in this investigation is the type of surface which is changing whereas, the dependent variable is the mobility of earth worm.

In a experiment or investigation, there are two types of variables which are dependent and independent variable. Dependent variable are those which are dependent on other variables and are changing with respect to other variables.

Independent variables are those not dependent on any other variables and  we can change the independent variable to study the change in dependent variable.

Here, the one we studying is the mobility of earth worm which is the dependent variable and the type of surface rough or smooth is the independent variable.

Find more on independent variable:

https://brainly.com/question/1479694

#SPJ1

Answer:

C.

Explanation:

Seems the most reasonable to me

Answer:

Q = N e     total charge passing point

Q = 2.0E20 * 1.6E-19 coul = 32 coulombs

2)    I = Q / t = 32 C / 60 s = .53 amps

3)   R = V / i = 12 volts / .53 amps = 23 ohms

Accenture is leveraging its advanced robotics capabilities to reduce emissions and achieve its sustainability goals.

What do you mean by Emissions?

Emissions are substances that are released into the environment, usually as a result of human activities. These substances can be in the form of gases, particles, or radiation, and they can be either natural or man-made. Common emissions include carbon dioxide, methane, and other greenhouse gases, as well as air pollutants such as volatile organic compounds (VOCs) and particulate matter.

Accenture is developing autonomous robots to reduce the carbon footprint of its operations, as well as to enable more efficient and low-emission operations. These robots are designed to be energy-efficient and require minimal human intervention. They can detect and diagnose potential issues in the system, such as air quality, temperature, and humidity, and can be used to automatically reduce energy consumption. Additionally, Accenture is also exploring the use of robotics to enable more energy-efficient production processes, such as 3D printing and additive manufacturing.

To know more about emissions,

https://brainly.com/question/30088186

#SPJ4