The heat needed for the air to change from 27°C to 400°C is 291 J.
How to calculate specific heat capacity?First, calculate the final volume of the air using the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming that the pressure remains constant, rearrange the ideal gas law to solve for the final volume:
V₂ = (nRT₂) / P
where T₂ is the final temperature.
Calculate the initial number of moles of air using the ideal gas law with the original conditions:
n = (PV) / RT₁
where T₁ is the initial temperature.
Substituting the given values:
n = (3.0 atm x 5860 cm3) / (0.0821 L atm/mol K x 300 K)
n = 0.72 mol
Now calculate the final volume:
V₂ = (0.72 mol x 0.0821 L atm/mol K x 673 K) / (3.0 atm)
V₂ = 13.47 L
The change in volume is therefore:
ΔV = V₂ - V₁
ΔV = 13.47 L - 5.86 L
ΔV = 7.61 L
To calculate the heat required, use the equation:
q = nCvΔT
where ΔT is the change in temperature.
Substituting the given values:
q = (0.72 mol x 0.177 cal/g °C x (400°C - 27°C))
q = 69.7 cal
Finally, convert this to joules:
q = 69.7 cal x 4.184 J/cal
q = 291 J
Therefore, the amount of heat that must be added to the air is 291 J.
Learn more on specific heat capacity here: https://brainly.com/question/27991746
#SPJ1
The complete question is:
For air, Cv= 0.177 cal/g.°C. Suppose that air is confined to a cylinder by a movable piston under a constant pressure of 3.0 atm. How much heat must be added to the air if its temperature is to be changed from 27°C to 400°C? The mass of air in the cylinder is 20 g, and its original volume is 5860 cm.
What is the net force on a 4000kg car that doubles its velocity from 15m/s west to 30m/s west over ten seconds
Answer:
30,000kg m/s²
Explanation:
Force=mass ×acceleration
Acceleration = Change in Velocity /time
Acceleration =V2-V1/T
Acceleration= 30-15/2
Acceleration =15/2
=7.5m/s²
Force = 4000kg × 7.5m/s²
=30,000kgm/s²
You can also place the answer in Newton (N)
A bullet of mass 10g traveling at a speed of 100m/s embeds itself into a block of wood of mass 1900g. Suspended by a string.
A) Determine the velocity of the block and bullet immediately after the impact.
B) What is the height the pendulum rises to after impact?
0.025 kg of water is fired from a water pistol with a speed of 230 m/s.
If the water pistol has a mass of 0.9 kg, what is the recoil speed of the
water pistol?
Show Your Work
The recoil speed of the water pistol, given that the mass of the water pistol is 0.9 Kg is -6.39 m/s
How do i determine the recoil speed of the water pistol?The following data were obtained from the question:
Mass of water (m₁) = 0.025 KgSpeed of water (v₁) = 230 m/sMass of water pistol (m₂) = 0.9 KgRecoil speed of water pistol (v₂) = ?The recoil speed of the water pistol can be obtained as illustrated below:
m₁v₁ = -m₂v₂
(0.025 × 230) = -(0.9 × v₂)
5.75 = -0.9v₂
Divide both sides by -0.9
v₂ = 5.75 / -0.9
v₂ = -6.39 m/s
Thus, we can conclude that the recoil speed is -6.39 m/s
Learn more about recoil speed:
https://brainly.com/question/19901236
#SPJ1
Explain how you can use aspects of Newton’s second law to improve your car
a red lady appears ___ in blue light
How would you use knowledge of force of impact to respond to a head-on or side collision
Reduce damage to the passenger compartment by changing the point of impact in a side-impact crash to your engine compartment or rear end. Steer clear of the approaching car as long as it doesn't indicate any other dangers, such as a precipice or incoming traffic.
Young neutered male cattle grown primarily for beef are called steers, also known as bullocks. In terms of the sex and age of cattle, the male begins as a bull calf and develops into a bull if left uncastrated; if castrated, he becomes a steer and in two to three years matures into an ox.
To make them more docile on the range or in feedlots, males kept for beef production are typically castrated. Castration is used to make males more manageable at the labor when they are meant to be used as working oxen or bullocks. See also farmed livestock, cattle, cows, and livestock.
Learn more about Steer here:
brainly.com/question/29944212
Create an informational poster on three of the most important points of a specific federal educational policy. You poster should explain these points to a general audience.
Identify a specific federal educational policy that you wish to investigate.
Find a minimum of three online resources that describe your chosen policy. One of the resources should be the text of the actual educational policy. You can find a link to each of these documents in the references section of this lesson.
Identify the most important points of the policy, and design a poster that explains these points to a general audience. Your poster should be informative, but also readable.
To complete your assignment, submit:
Your poster.
A list of all references used in the assignment.
File Upload
Answer:
Federal Educational Policy: Every Student Succeeds Act (ESSA)
Resources:
1. Every Student Succeeds Act (ESSA): https://www.ed.gov/essa
2. What is the Every Student Succeeds Act (ESSA)?: https://www.edweek.org/ew/section/multimedia/what-is-the-every-student-succeeds-act-essa.html
3. ESSA Overview: https://www2.ed.gov/policy/elsec/leg/essa/overview.html
Poster:
Title: The Every Student Succeeds Act (ESSA)
The Every Student Succeeds Act (ESSA) is a federal educational policy that was signed into law in 2015. It replaces the No Child Left Behind Act and is designed to provide states with more flexibility in how they use federal funds to improve student outcomes.
Here are three of the most important points of ESSA:
1. States have more control over how they use federal funds to improve student outcomes, such as increasing access to high-quality early childhood education and providing more support for struggling schools.
2. ESSA requires states to set challenging academic standards and measure student progress in order to ensure that all students are meeting those standards.
3. ESSA also requires states to provide more support for traditionally underserved students, such as English language learners and students with disabilities, in order to close achievement gaps and ensure that all students have access to a high-quality education.
Explanation:
A resistor is essentially a poor conductor of electricity. When you send current through a resistor, that current always experiences a voltage drop, never a voltage rise. One way to understand this effect is that(A) more current leaves a resistor than enters it, so the voltage must go down to compensate. (B) it's easy to turn electric energy into thermal energy but not the other way around. (C) less current leaves a resistor than enters it, so the voltage must go down as well. (D) current can only flow forward through a resistor, never backward
(C) Less current leaves a resistor than enters it, so the voltage must go down as well.
Materials that are poor conductors of electricity are called insulators. Wood, glass, plastics, and non-metal elements made of hydrocarbon polymers are among the examples. As electricity cannot pass through these materials.A poor conductor is a material for which conductivity is low, yet sufficient to exhibit significant loss. To be clear, the loss we refer to here is the conversion of the electric field to current through Ohm's law. The threshold of significance depends on the application.Conductors conduct electrical current very easily because of their free electrons. Insulators oppose electrical current and make poor conductors.
For such more questions on poor conductors:
https://brainly.com/question/29111923
#SPJ11
PLEASE HELP! DUE IN 30 MINS! 50 POINTS!The questions that were cut off at the bottom were: What rule of magnetism is illustrated by the lines of the iron filings in Step 12?
What rule of magnetism is illustrated by the lines of the iron filings in Step 15?
Why was glass or plastic used to separate the filings from the magnets in the experiments?
Did the glass or plastic stop the passage of the magnetic lines of force?
Did the iron filings almost or completely bridge the open end of the horseshoe magnet?
The lines of iron fillings will be attracted towards the poles of the magnet on the paper. The fillings gets sticked on the magnet. The glass or plastic will stop the passage of the magnetic lines of force .
What are magnetic field lines ?Magnetic field lines are lines of force generated by a strong magnetic field. For a bar magnet, the magnetic south pole and north pole are having stronger magnetic fields than the middle part.
When magnetically susceptible materials comes in contact with a magnet they gets attracted to the poles of the magnet. The fields lines of the material gets aligned parallel to the applied field.
Some materials such as paper and glass are not showing magnetic properties. Hence, they can stop the passage of magnetic field lines. If we place a glass or paper in between the poles of a two magnets, they will stick to the glass from both ends due to the attraction to the opposite pole.
Find more on magnetic field:
https://brainly.com/question/11514007
#SPJ1
In a moving bus, a person who is near to the engine feels very warm. The method of heat transmission from the engine to the person is through
The method of heat transmission from engine to the person is through radiation.
What is heat ?Heat is a form of energy which is transferred between bodies having different temperature.
Here,
The person near to the engine feels very warm in a moving bus. This is because of the heat transfer from the engine to the person. Here the two bodies, the person and engine are not in contact and also there is no other medium to transfer the heat between them. So, the heat is transferred from the engine to the person through radiation.
Hence,
The method of heat transmission from engine to the person is through radiation.
To learn more about heat, click:
https://brainly.com/question/16084179
#SPJ1
Carlos was playing on a slide on a sunny summer day. Which property of the slide tells Carlos how much energy the slide absorbed from the Sun?
O the mass
O the color
O the height
O the temperature
Answer:
Its D
Explanation:
just did It :)
Block slides rightward on the floor toward an ideal spring attached to block , as shown. At time , block reaches the spring and starts compressing it as block also starts to slide to the right. At a later time, , block loses contact with the spring. Both blocks slide with negligible friction. Taking rightward as positive, which pair of graphs could represent the acceleration of block and the center-of-mass acceleration of the two-block system?
At this moment, the block will start to speed to the left as the spring starts to apply force on it.
What does the word "force" mean?The definition of force in physics is: The press or pull on a massed object changes its velocity. An agent with the ability to change a body's resting or active condition is known as an external force.
What in science is a force?The word "power" has a specific meaning in physics. Calling a force at this point a pressing or a pull is perfectly appropriate. A force does not "be in it" or "be contained by" an object. One thing experiences a force from another. Both biological things and inanimate objects can be considered forces.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ1
Which statement best describes a primary source?
a. the source is written by an expert in the field
b. the source is compiled from other sources
c. the source is written by the person who conducted the expirement
d. the source is filled with mathematical questions
Answer:
C.
Explanation:
c. the source is written by the person who conducted the experiment. A primary source is an original piece of information created at the time under study. It can be a diary, a letter, a photograph, a recording, or any other type of artifact. It provides firsthand information about an event or topic, and is created by a person who was directly involved or witnessed it.
Mallory pushes her water bottle of 1. 70 kg to the side. She applies a force of 108. 20 N to the right. If the bottle accelerates at 8. 79 m/s2, what is the coefficient of friction?
Mallory pushes her water bottle of 1. 70 kg to the side. She applies a force of 108. 20 N to the right. If the bottle accelerates at 8. 79 m/s2, the coefficient of friction is 5.5 .
What is coefficient of friction?The friction coefficient is the ratio of the normal force pressing two surfaces together to the frictional force preventing motion between them. Typically, it is represented by the Greek letter mu (μ). In terms of math, is equal to [tex]\frac{F}{N}[/tex], where F stands for frictional force and N for normal force. The coefficient of friction has no dimensions because both F and N are measured in units of force (such as newtons ). For both static and kinetic friction, the coefficient of friction has a range of values. When an object experiences static friction, the frictional force resists any applied force, causing the object to stay at rest until the static frictional force is removed. The frictional force opposes an object's motion in kinetic friction.
According to the equation,
F - f = ma
where,
F is force applied,
f is friction between surfaces,
m is the mass of the water bottle and,
a is the acceleration.
Substituting the values and solving for f,
f = F - ma
f = 108.20 - 14.9
f = 93.3 N
f = μN
where,
μ is the coefficient of friction and,
N is the normal reaction.
substituting the values and solving for μ,
coefficient of friction = 5.5
To know more about static friction, visit;
https://brainly.com/question/13000653
#SPJ1
two people are being pulled up out of the water by a helicopter the helicopter pulls the two people upwards who weigh a combined 150 kg and lifts them 20 meters. determine the work done by the helicopter
The helicopter generates 29,400 Joule of work. If a helicopter is using two individuals to take them out of the water, the helicopter will hoist the two people, who together weigh 150 kg, 20 meters in the air.
Definition of Completed Work.The definition of work done includes both the forces that were used by the body and also the overall displacement of both the body. A constant total Force is present before to this block. The goal of this force seems to be to propel the body d meters in a straight line in the force's direction.
How is work completed?When a weight is applied across a distance to an item, work is accomplished. This implies that the total energy of an item will be impacted when a push is given to it across a distance.
Work = Force x Distance
= 150 kg x [tex]9.8 m/s^{2}[/tex] x 20 m
= 29,400 J
To know more about work done visit:
https://brainly.com/question/30073908
#SPJ1
why is it more difficult to steer a bike when your hands are close together on the handlebars than when they are far apart?
Answer:
When the hands are close together on the handlebars of a bike, the steering is more sensitive and requires more effort to make small adjustments. This is because the steering axis of the bike, which is an imaginary line passing through the center of the front wheel and the center of the steering tube, is shorter. This means that even small movements of the handlebars translate to larger changes in the direction of the front wheel.
On the other hand, when the hands are far apart on the handlebars, the steering is less sensitive and requires less effort to make adjustments. This is because the steering axis of the bike is longer, meaning that larger movements of the handlebars are required to achieve the same change in direction of the front wheel.
Overall, the sensitivity of the steering depends on the length of the steering axis, which in turn depends on the distance between the hands on the handlebars. Therefore, it is more difficult to steer a bike when the hands are close together on the handlebars than when they are far apart.
Explanation:
Select all the correct answers.
The table represents the length of a spring when an object with mass is suspended from the spring.
Length (inches)
10
15
20
25
30
Mass (grams)
0
20
40
60
80
Select all the key features of this function.
A. The function has a y intercept at 10
B. The function approaches positive infinity as x approaches negative infinity
C. The function approaches 10 as x approaches infinity.
D. The function has a y intercept at 30
E. The function has a slope of 1/4
F. The function has a slope of 4
The function has a y intercept at 10 and the function approaches 10 as x approaches infinity.
The correct answers are A and C.
What is a function?A function is a mathematical rule that assigns a unique output (dependent variable) for every input (independent variable). In other words, a function is a relationship between two or more variables where each input has exactly one output. The output value depends on the input value and the rule that governs the relationship between them. A function can be represented as a graph, table, or formula.
From the given question above;
A. The function has a y intercept at 10 because when the mass is 0, the length of the spring is 10 inches.
C. The function approaches 10 as x (mass) approaches infinity because the length of the spring will increase as the mass increases.
Learn more about mathematical functions here https://brainly.com/question/11624077
#SPJ1
If hydropower were to be our primary way for generating electricity, what effect would this have on individuals and the environment?
Answer:
If hydropower were to be our primary way for generating electricity, it would have several effects on individuals and the environment, both positive and negative. Here are some examples:
Positive effects:
Hydropower is a renewable energy source, meaning that it does not produce greenhouse gas emissions and does not contribute to climate change.
Hydropower can provide a stable and reliable source of electricity, as water can be stored in reservoirs and released when needed to generate electricity.
Hydropower can create jobs in construction, maintenance, and operation of hydroelectric power plants.
Negative effects:
The construction of large dams for hydropower generation can have significant impacts on ecosystems and communities. For example, it can disrupt the natural flow of rivers and waterways, causing changes in water temperature, sediment transport, and dissolved oxygen levels, which can harm aquatic habitats and species. It can also lead to the displacement of communities living in the area.
Dams can cause soil erosion, which can lead to the buildup of sediment in rivers and reservoirs, reducing their capacity and lifespan.
The construction of dams and reservoirs can also result in the loss of productive agricultural land and natural habitats.
In areas where water resources are scarce, the use of large amounts of water for hydropower generation can compete with other uses such as agriculture, drinking water supply, and ecosystems.
Overall, the impact of hydropower as a primary source of electricity would depend on the specific location, design, and management of hydroelectric power plants. Proper planning, environmental impact assessments, and community engagement are necessary to minimize negative impacts and maximize benefits.
Explanation:
hope it help pa brainliest po
Before a run, you eat an apple with 1,000,000 Joules of binding energy. 550,000 Joules of binding energy are wasted during digestion. How much energy remains J.
The total binding energy of the apple is 1,000,000 Joules. Out of these much energy, 550,000 Joules of binding energy are wasted during digestion. Then, 450000 J or binding energy remains.
What is binding energy ?Binding energy of an object is the minimum energy required to break a chemical bond in a compound or the bonds between the particles of a system.
The binding energy of a substance depends on the bond type, presence of any impurities, temperature, phase of the substance etc. Given the binding energy of the apple is 1,000,000 Joules.
The energy wasted during digestion = 550,000 Joules
then the remaining energy = total energy - wasted energy
= 1,000,000 Joules - 550,000 Joules
= 450000 J.
Therefore, the energy remains in the person is 450000 J.
Find more on binding energy:
https://brainly.com/question/30087556
#SPJ9
what is the mass, Fnet and Fapp?
Mass is a measure of an object's inertia, or resistance to changes in its motion. It is measured in kilograms (kg).
What is Mass?Mass is a physical property of an object that measures the amount of matter it contains. It is measured in kilograms (kg) or in grams (g). Mass is different from weight, which is the measure of the force of gravity on an object. Mass is the same everywhere in the universe and is unaffected by gravity, while weight depends on gravity and can vary from place to place. Mass is an important concept in physics, as it is used to calculate energy, momentum, and other physical properties of an object.
Fnet (net force) is the sum of all the forces acting on an object. It is measured in Newtons (N).
Fapp (applied force) is the force that is applied to an object in order to change its motion. It is also measured in Newtons (N).
To learn more about Mass
https://brainly.com/question/19385703
#SPJ1
Answer question in the photo
A weight lifter does 1700.44 Joules of work to lift the barbell from the floor to a height of 9.90 meters.
How to solve for work done?To calculate the work done by the weightlifter, we need to use the formula:
Work = force x distance x cos(theta)
where force is the weight of the barbell, distance is the height it is lifted, and theta is the angle between the force and the direction of motion. Since the weightlifter is lifting the barbell straight up, theta is 0 degrees and cos(theta) is 1.
So, we have:
Work = 171.60 N x 9.90 m x 1
Work = 1700.44 Joules
Therefore, the weightlifter does 1700.44 Joules of work to lift the barbell from the floor to a height of 9.90 meters.
Learn about work done here https://brainly.com/question/19160081
#SPJ1
pls help Patton launches a water balloon at a speed of 15.8 meters per second in the positive x-direction at an angle of 19.5 above horizontal. What are the components of the velocity vector right before the balloon strikes the ground?
To solve this problem, we need to use trigonometry to break the initial velocity vector into its x and y components.
What is Velocity?
Velocity is a vector quantity that describes the rate at which an object changes its position. It is defined as the displacement of an object per unit time in a particular direction.
In other words, velocity is the speed of an object in a given direction. It is a vector quantity because it has both magnitude (the speed) and direction.
The initial velocity vector can be represented as follows:
v = 15.8 m/s [19.5° above horizontal]
The x-component (vx) of the velocity vector can be found using the cosine function:
cos(19.5°) = vx / 15.8 m/s
vx = 15.8 m/s cos(19.5°) = 14.9 m/s
The y-component (vy) of the velocity vector can be found using the sine function:
sin(19.5°) = vy / 15.8 m/s
vy = 15.8 m/s sin(19.5°) = 5.25 m/s
When the water balloon strikes the ground, its y-velocity component will be zero because it will have reached the ground level. Therefore, the components of the velocity vector right before the balloon strikes the ground are:
vx = 14.9 m/s [to the right]
vy = 5.25 m/s [upward]
Learn more about Velocity from given link
brainly.com/question/80295
#SPJ1
A student places two horseshoe magnets next to each other, and the poles of the magnets attach to each other. How does the kinetic energy of the system change?
The kinetic energy of the system does not change.
When two horseshoe magnets are placed next to each other, then they either attract or repel each other, depending on the position of their poles. if the poles are opposite they attract, if they are same they repel with other.
In case, if the poles of two horseshoe magnets are attracted to each other, indicating poles are opposite to each other. when the magnets are brought together then the work must be done to oppose the magnetic field between poles. This increases the potential energy of the system.
However, the question is about the kinetic energy of the system, which is related to the motion of the objects in the system. In this case, once the magnets are brought together they attract each other, they will have zero potential. Therefore, the kinetic energy will not change.
To learn more about, Magnets
https://brainly.com/question/15191098
https://brainly.com/question/26051825
Calculate the moving energy
m=300kg
v=90km/h
Em=?
Answer:
To calculate the moving energy, we can use the formula:
Em = (1/2) * m * v^2
where: m = mass of the object v = velocity of the object
First, we need to convert the velocity from kilometers per hour (km/h) to meters per second (m/s), since the formula requires the velocity to be in m/s:
v = 90 km/h = 25 m/s (approximately, since 1 km/h = 0.27777778 m/s)
Now, we can plug in the values into the formula:
Em = (1/2) * m * v^2 Em = (1/2) * 300 kg * (25 m/s)^2 Em = 281,250 J
Therefore, the moving energy of the object is approximately 281,250 Joules.
What would be its orbital velocity if Ingenuity is on the surface of Mars?
For the answer, type in your answer (in standard notation, not scientific
notation). Do not write units.
Include two numbers after the decimal (the hundredths place).
The orbital velocity, if Ingenuity is on the surface of Mars is 3549.67 m/s
What is Orbital Velocity ?Orbital velocity is also called as critical velocity. It is minimum velocity must be given to the satellite or the body, so that it can revolve around the planet. i.e. orbital velocity is minimum velocity of body to revolve in stable orbit around a planet.
Orbital velocity is given by,
[tex]v_{c} =\sqrt{\frac{GM}{R+h}}[/tex] where G = Gravitational constant (6.673×10⁻¹¹ Nm²/kg²)
M = Mass of the planet
R = Radius of the planet
h = height of the object(satellite)
Orbital velocity depends on mass of the planet, radius of the planet and height of the object(satellite). It is independent of mass of the body(satellite).
Given,
M = 6.42×10²³ kg
R= 3.4×10⁶ m
h= 0 m (our body is on surface of the mars so)
Putting these values in the equation.
[tex]v_{c} =\sqrt{\frac{GM}{R}}[/tex] = [tex]\sqrt{\frac{(6.673*10^{-11}) (6.42*10^{23}) }{3.4*10^{6}}}[/tex]
[tex]V_{c}[/tex]= 3549.67 m/s
Hence Orbital velocity of Ingenuity on the surface of Mars 3549.67 m/s
To know more about orbital velocity, click:
https://brainly.com/question/15886625
#SPJ1
A 0.14-kilogram baseball is thrown in a straight line at a velocity of 30 m/sec. What is the momentum of the baseball?
The momentum of the baseball will be "4.20 kg.m/s".
Given values are:
Mass,
m = 0.14 kgVelocity,
v = 30 m/sAs we know the formula,
→ [tex]Momentum=Mass*Velocity[/tex]
or,
→ [tex]P=mv[/tex]
By substituting the given values, we get
→ [tex]=0.14*30[/tex]
→ [tex]=4.20[/tex] [tex]kg.m/s[/tex]
Thus the above answer is correct.
Learn more about momentum here:
https://brainly.com/question/3443288
A block is pushed against the spring with
spring constant k (located on the left-hand
side of the track) and compresses the spring a
distance 4.9 cm from its equilibrium position
(as shown in the figure below).
The block starts at rest, is accelerated by
the compressed spring, and slides across a
frictionless track except for a small rough area
on a horizontal section of the track (as shown
in the figure below).
It leaves the track horizontally, flies through
the air, and subsequently strikes the ground.
The acceleration of gravity is 9.81 m/s².
What is the spring constant k?
The spring constant k is approximately 1520 N/m by using conservation of energy?
What is the spring constant?We can use the conservation of energy to find the spring constant k. Initially, the block has potential energy stored in the compressed spring, which is then converted to kinetic energy as the block slides across the track. At the point where the block leaves the track, all of the stored energy has been converted to kinetic energy. Neglecting air resistance, we can assume that the kinetic energy of the block at this point is equal to the potential energy stored in the spring:
[tex](1/2)kx² = (1/2)mv²[/tex]
where x is the distance the spring is compressed (0.049 m), m is the mass of the block, and v is the velocity of the block when it leaves the track.
Since the block is initially at rest, we can also use kinematic equations to relate the velocity of the block to the distance it travels along the track before leaving it. The horizontal displacement of the block is unknown, so we'll call it d:
d = (1/2)at²
where a is the acceleration of the block along the track and t is the time it takes to travel that distance. The acceleration of the block is determined by the force applied by the spring:
F = kx
ma = kx
a = kx/m
Now we can substitute this expression for acceleration into the kinematic equation:
[tex]d = (1/2)(kx/m)t[/tex]²
Since the block leaves the track horizontally, its vertical displacement is given by:
y = (1/2)gt²
where g is the acceleration due to gravity.
Combining these equations, we can eliminate t and solve for k:
[tex](k/m)(0.049)² = g(2y/g)(2d/(k/mg))²[/tex]
Simplifying, we get:
[tex]k = (mg²d)/(0.049²(4y + gd))[/tex]
Substituting the given values for m, d, and y, and the acceleration due to gravity g = 9.81 m/s², we get:
[tex]k = (0.4 kg)(9.81 m/s²)²(2.3 m)/[(0.049 m)²(4(0.8 m) + (9.81 m/s²)(2.3 m))][/tex]
k ≈ 1520 N/m
Therefore, the spring constant k is approximately 1520 N/m.
Learn more about spring constant, here:
https://brainly.com/question/14159361
#SPJ1
1. A ball is thrown horizontally at a height of 4.91 m above the ground. It has an initial speed of 16.0 m/s. How long will it take to drop to the ground? How far, measured horizontally from the launch point, will it strike the ground?
It will take the ball 1 s to drop to the ground
The distance from the launch point where the ball will strike the ground would be 16.0 m.
Projectile motionWe can use the kinematic equations of motion to solve this problem. The vertical motion of the ball can be described using the equation:
h = vit + 1/2g*t^2
where h is the initial height, vi is the initial vertical velocity (which is zero), g is the acceleration due to gravity (9.8 m/s^2), and t is the time taken to fall to the ground. Solving for t, we get:
t = sqrt(2h/g) = sqrt(2*4.91 m/9.8 m/s^2) = 1 s
The horizontal motion of the ball is uniform, since there is no horizontal acceleration. We can use the equation:
d = v*t
where d is the distance traveled, v is the initial horizontal velocity (which is 16.0 m/s), and t is the time taken to hit the ground (which is 1 s). Solving for d, we get:
d = v*t = 16.0 m/s * 1 s = 16.0 m
So the ball will strike the ground 16.0 meters away from the launch point, measured horizontally.
More on projectile motion can be found here: https://brainly.com/question/11049671
#SPJ1
2. Where a river flows from an area of hard rock to an area of soft rock, the softer rock may wear away, eventually forming a drop called a(n) __.
A. Oxbow lake
B. Waterfall
C. Gully
D. Delta
Where a river flows from an area of hard rock to an area of soft rock, the softer rock may wear away, eventually forming a drop called a waterfall. Thus, the correct option is B.
What is a Waterfall?A waterfall is a river or other body of the water's steep which fall over a rocky ledge into a plunge pool below. Waterfalls are usually also called as cascades. The process of erosion, the wearing away of the earth, plays an important part in the formation of waterfalls in the world.
Waterfalls are generally created when the riverbed changes suddenly from the hard rock to soft rock. Rapids are formed where a fast-flowing river quickly cuts downwards through the waterbed of hard and soft rocks, eroding the soft rock and leaving the hard rocks which are standing above the water surface.
Where a river flows from an area of harder rock to an area of the softer rock, the softer rock may wear away, and it eventually results into the formation of a drop called a waterfall.
Therefore, the correct option is B.
Learn more about Waterfalls here:
https://brainly.com/question/30309599
#SPJ1
a track of mass 2000kg travelling at 12m/s has it initial speed reduces ti 6m/s a constant breaking force over a distance of 40m.what is the breaking force?
The breaking force, given that the truck reduces it speed from 12 m/s to 6 m/s over a distance of 40 m is -2700 N
How do i determine the breaking force?We'll begin by obtaining the deceleration of the truck. Details below:
Initial velocity (u) = 12 m/sFinal velocity (v) = 6 m/s Distance (s) = 40 mDeceleration(a) =?v² = u² + 2as
6² = 12² + (2 × a × 40)
36 = 144 + 80a
Collect like terms
36 - 144 = 80a
-108 = 80
Divide both side by 80
a = -108 / 80
a = -1.35 m/s²
Finally, we shall determine the breaking force. Details below:
Mass (m) = 2000 KgDeceleration (a) = -1.35 m/s²Breaking force (F) =?Force = mass × deceleration
Breaking force = 2000 × -1.35
Breaking force = -2700 N
Thus, the breaking force is -2700 N
Learn more about force:
https://brainly.com/question/12163222
#SPJ1