Find all solutions of the equation: 2 cos x-1-0
I NEED HELP ASAP!

We use standard units when measuring an object because :

A. Standard units are used because they are relatively permanent.

B. Standard units enable communication over time.

C. Standard units enable communication over distance.

D. Standard units are exact.

We use standard units when measuring an object because they are relatively permanent and enable communication over time, distance, and exactness.

Standard units are used because they are relatively permanent. This means that they do not change over time and are consistent. Standard units enable communication over time. Since they are consistent, they allow for accurate communication of measurements even if they are taken at different times.

Standard units enable communication over distance. They allow for accurate communication of measurements even if the people communicating are in different locations. Standard units are exact. This means that they are precise and accurate, allowing for consistent measurements.

Learn more about standard unit at https://brainly.com/question/11067807

#SPJ11

Isabel had 10 kilogram of oranges when she started. She ate 2 kilogram of the oranges, leaving her with 8 kilogram. This means that she has 8/10 kilogram of oranges left.

It is important to understand how to calculate fractions in order to answer questions like this. In this case, the question was asking how much of a kilogram remains after Isabel ate 2 kilogram. To answer this, we had to figure out what fraction of the 10 kilogram Isabel ate, which was 2/10. We then subtracted this fraction from 1 in order to figure out how much of a kilogram remains, which was 8/10.

This kind of calculation is useful when trying to figure out how much of something remains after a certain amount has been taken away. It can be used in a wide variety of contexts, such as when trying to figure out how much of a product or item remains after some has been sold or used. Understanding how to calculate fractions can be very helpful in these kinds of scenarios.

Know more about scenarios here

https://brainly.com/question/17129508#

#SPJ11

The temperature at 7 AM is approximately 87 degrees.

The outside temperature over a day can be modeled as a sinusoidal function. In this case, we know that the high temperature of 98 degrees occurs at 6 PM and the average temperature for the day is 85 degrees. To find the temperature at 7 AM, we can use the equation:

T(t) = A sin(B(t - C)) + D

where T(t) is the temperature at time t, A is the amplitude, B is the frequency, C is the horizontal shift, and D is the vertical shift.

We know that the average temperature is 85 degrees, so D = 85. We also know that the high temperature of 98 degrees occurs at 6 PM, so A = (98 - 85)/2 = 6.5 and C = 6.

Now we can plug in the values and solve for the temperature at 7 AM:

T(7) = 6.5 sin(B(7 - 6)) + 85

Since we want to find the temperature to the nearest degree, we can round the answer to the nearest whole number:

T(7) = 6.5 sin(B) + 85 ≈ 87 degrees

Therefore, the temperature at 7 AM is approximately 87 degrees.

Learn more about temperature

brainly.com/question/11464844

#SPJ11

The answers to each part about the scale factor is given above.

Scale factor is the ratio of final dimensions to the initial dimensions.

Mathematically, we can write -

K = {final dimension/initial dimension}

Given are the dimensions of the drawing as -

Original                        1.5 in.          3 yd

Enlargement               2.5 in.          5 yd

{ 1 } -

We can write the scale factor as -

K = 3/1.5

K = 2

{ 2 } -

Area of the scaled drawing -

A = 2.5 x 5

A = 2.5 x 180

A = 450 square inches

{ 3 } -

To find the area of the actual drawing, multiply the area of the scale drawing by the multiple of the scale factor.

Therefore, the answers to each part about the scale factor is given above.

To solve more questions on scale factor, visit the link-

https://brainly.com/question/30948953

#SPJ1

The average cost of a call depends on the initial period, subsequent period, and unit cost for each subsequent period. By using the formula derived above, we can calculate the average cost of a call for different values of I, S, and p.

The average cost of a call can be calculated using the formula: Average Cost = r + p(S-1)/(S-1+1/e^S), where r is the cost for the initial period, p is the unit cost for each subsequent period, and S is the length of each subsequent period.

If the cost of a call is $1 per minute and the average call length is one minute, then the average cost of a call is just $1. However, if the call is rounded up to the next minute (I = S = 1), then the average cost can be calculated using the formula derived above: Average Cost = r + p(S-1)/(S-1+1/e^S) = $1 + $1(1-1)/(1-1+1/e^1) = $1 + $1(0)/(0+1/e) = $1.

If I = S = 0.1 (i.e., rounded up to the next 6 seconds), then the average cost can be calculated using the formula derived above: Average Cost = r + p(S-1)/(S-1+1/e^S) = $1 + $1(0.1-1)/(0.1-1+1/e^0.1) = $1 + $1(-0.9)/(-0.9+1/e^0.1) = $1.07.

Therefore, the average cost of a call depends on the initial period, subsequent period, and unit cost for each subsequent period. By using the formula derived above, we can calculate the average cost of a call for different values of I, S, and p.

Learn about Average

brainly.com/question/24057012

#SPJ11

A \times B \times C = \left[\begin{array}{ll} -40 & -60 \\ -68 & 70 \\ 6 & 0 \end{array}\right]

To find the product of the matrices A, B and C, we can use the following equation:



$$A \times B \times C = \left[\begin{array}{lll} (A \times B)_{11} & (A \times B)_{12} & (A \times B)_{13} \\ (A \times B)_{21} & (A \times B)_{22} & (A \times B)_{23} \\ (A \times B)_{31} & (A \times B)_{32} & (A \times B)_{33} \end{array}\right] \times C = \left[\begin{array}{ll} (A \times B \times C)_{11} & (A \times B \times C)_{12} \\ (A \times B \times C)_{21} & (A \times B \times C)_{22} \\ (A \times B \times C)_{31} & (A \times B \times C)_{32} \end{array}\right]$$



To find each element of the product, we use the following equation:



$$(A \times B \times C)_{ij} = \sum_{k=1}^{3} A_{ik} \times B_{kj} \times C_{ij}$$



Where $i$ and $j$ represent the row and column numbers respectively. For example, to find the element $(A \times B \times C)_{11}$, we have:



$$(A \times B \times C)_{11} = \sum_{k=1}^{3} A_{1k} \times B_{k1} \times C_{11} = (-5 \times -8 \times -4) + (1 \times 7 \times -4) + (-7 \times 5 \times -4) = -40$$



Therefore, the product of A, B and C is:



$$A \times B \times C = \left[\begin{array}{ll} -40 & -60 \\ -68 & 70 \\ 6 & 0 \end{array}\right]$$

Learn more about product of the matrices

brainly.com/question/24810141

#SPJ11

Hence, a 19-gram sample would contain 2.5909 x 10⁵ germs.

How come we use measure?

We can compare unknown amounts to known values with the use of measurement. We can quantify the size, length, and speed of objects with the use of measurement. The final result won't be accurate without measurement.

We may start by calculating the bacterium to dirt sample weight ratio:

bacteria per gram = 1.5 x 10⁵ / 11 = 13636.36...

We are able to employ this ratio to determine how many bacteria are present in a 19-gram specimen:

bacteria = bacteria per gram x weight of sample

bacteria = 13636.36... x 19

bacteria = 259090.91...

We must write the number in scientific notation because it is more than 10⁵. This can be achieved by adding a factor of 10⁵ and shifting the decimal place five places to a left:

bacteria = 2.5909 x 10^5

To know more about Measure visit:

https://brainly.com/question/4725561

#SPJ9

Answer:

2

Step-by-step explanation:

Answer:

x ∈ { ( 6 + [tex]\sqrt{23}[/tex] * i) , { ( 6 - [tex]\sqrt{23}[/tex] * i) }

Step-by-step explanation:

Given: [tex]x^2-12x+59=0[/tex]

First, collect like terms. [tex]x^2[/tex] and -12x, 59 and 0:

[tex]x^2-12x=0-59[/tex]

+59 is changed to -59 when transferred. Then subtract:

( x - 12 ) x = -59

Finally divide both sides by -59:

x ∈ { ( 6 + [tex]\sqrt{23}[/tex] * i) , { ( 6 - [tex]\sqrt{23}[/tex] * i) }

v = -29/5 is the simplest form of the (4)/(v+5)=5.

To solve for v, we need to isolate the variable on one side of the equation. We can do this by following these steps:

Step 1: Multiply both sides of the equation by (v+5) to get rid of the fraction. This gives us:
-(4) = 5(v+5)

Step 2: Distribute the 5 on the right side of the equation:
-(4) = 5v + 25

Step 3: Subtract 25 from both sides of the equation:
-29 = 5v

Step 4: Divide both sides of the equation by 5 to solve for v:
v = -29/5

To know more about simplest form click on below link:

https://brainly.com/question/290068#

#SPJ11

The distance across the lake is 120 feet.

Right angled triangle are those triangle for which one of the angle is 90 degrees.

Given is a right angled triangle.

Pythagoras theorem states that,

Square of the hypotenuse of a right angled triangle is equal to the sum of the squares of the two legs of the triangle.

The distance across the lake is one of the leg of the right triangle.

Length of hypotenuse = 208 feet + 104 feet

                                     = 312 feet

Length of other leg = 192 feet + 96 feet

                                = 288 feet

Distance across the lake = √(312² - 288²)

                                         = √14,400

                                         = 120 feet

Hence 120 feet is the distance across the lake.

Learn more about Pythagoras Theorem here :

https://brainly.com/question/21926466

#SPJ1

The probability that the product operates is 0.6055.

The probability can be meant as the chance something will be happened or not. The probability that the product operates is the probability that all 47 integrated circuits are not defective. Since the probability that any integrated circuit is defective is 0.01, the probability that it is not defective is 1 - 0.01 = 0.99. Since the integrated circuits are independent, the probability that all 47 are not defective is the product of the probability that each one is not defective. This is given by:

P(product operates) = 0.99⁴⁷ ≈ 0.6055

Here you can learn more about The Probability with access this link:

#SPJ11

Answer:

2. 29 3. 9:11, [tex]\frac{9}{11}[/tex], 55 4(a) 10.7

Step-by-step explanation:

2. 29

3. 9:11

   [tex]\frac{9}{11}[/tex]

   [tex]\frac{11}{20} *100%\\= 55%[/tex]

4(a)10.7

Using the scale factor, we found the volume of the larger cylinder as 70 m³.

One of the most fundamental curvilinear geometric shapes, a cylinder has historically been a three-dimensional solid. It is regarded as a prism with a circle as its base in basic geometry. One of the fundamental three-dimensional shapes in geometry is the cylinder, which has two distant, parallel circular bases. At a predetermined distance from the centre, a curved surface connects the two circular bases. The axis of the cylinder is the line segment connecting the centres of two circular bases. The height of the cylinder is defined as the distance between the two circular bases.

Given,

The scale factor of the cylinders = 5:2

The scaling factor indicates how much a figure has increased or decreased from its initial value.

The volume of the smaller cylinder = 28 m³

We are asked to find the volume of the larger cylinder.

let the volume of the larger cylinder be x.

x / 28 = 5/2

x  =(5/2) × 28 = 70

Therefore using the scale factor, we found the volume of the larger cylinder as 70 m³.

To learn more about the cylinder, follow the link.

brainly.com/question/23935577

#SPJ1

The water level after 4 weeks will be 29.2 feet.

The water level of the lake will increase by 10% each week during the winter rainstorms. This means that each week, the water level will increase by 0.10 × 20 = <<0.10*20=2>>2 feet.

After the first week, the water level will be 20 + 2 = <<20+2=22>>22 feet.
After the second week, the water level will be 22 + 2 = <<22+2=24>>24 feet.
After the third week, the water level will be 24 + 2 = <<24+2=26>>26 feet.
And so on.

We can use the formula A = P(1 + r)^n to find the water level after n weeks, where A is the final amount, P is the initial amount, r is the rate of increase, and n is the number of weeks.

In this case, P = 20, r = 0.10, and n is the number of weeks.

So, the water level after n weeks will be:

A = 20(1 + 0.10)^n

We can plug in different values of n to find the water level after a certain number of weeks.

For example, to find the water level after 4 weeks, we can plug in n = 4:

A = 20(1 + 0.10)^4 = 29.2 feet

So, the water level after 4 weeks will be 29.2 feet.

To know more about Water level:

https://brainly.com/question/1633537

#SPJ11

Answer:

I think the answer is 57.14

Answer:

57.14

Step-by-step explanation:

57.14 is the result of rounding 57.14 to the nearest 0.01

Answer: option D is correct

Step-by-step explanation

Angle makes Quadrant III is 60°

To find : terminal side angle .

solution : we know that sum of total angle

is 360° and half of it in 180°

here the possible angle of an

that has terminal side  in quadrant III

and makes a 60 degree with the x axis,

=) 120° + 60° =240°

                                          Hence the correct option is in D) 240°

The minima and minima of the function y=x^4-(32/3)x^3-2x^2+2x in the interval [0,3] are:
Maxima: x=2

Minima: None

The minima and maxima of a function are the lowest and highest points on the function within a given interval. To find these points, we need to take the derivative of the function and set it equal to zero to find the critical points. The critical points are where the function changes direction, and are potential minima or maxima. We can then use a conditional statement to determine if the critical points are within the given interval and if they are minima or maxima.

The derivative of the function is:
y'=4x^3-3(32/3)x^2-4x+2

Setting the derivative equal to zero, we get:
4x^3-32x^2-4x+2=0

We can use the Rational Root Theorem to find the potential rational roots of this equation. The potential rational roots are ±1, ±2, ±1/2, and ±1/4. Using synthetic division, we find that x=2 is a root. This gives us the factor (x-2), and we can use synthetic division again to find the other factors. The factored form of the equation is:
(x-2)(4x^2-12x+1)=0

Using the quadratic formula, we can find the other two roots:
x=3±√(3^2-4(4)(1))/2(4)
x=3±√(9-16)/8
x=3±√(-7)/8
x=3±i√7/8

The only real root is x=2, so this is the only critical point. We can use a conditional statement to determine if this critical point is within the given interval and if it is a minima or maxima. The critical point x=2 is within the interval [0,3], so we need to determine if it is a minima or maxima. We can do this by taking the second derivative of the function and plugging in the critical point:
y''=12x^2-6(32/3)x-4
y''(2)=12(2^2)-6(32/3)(2)-4
y''(2)=48-64-4
y''(2)=-20

Since the second derivative is negative at the critical point, this means that the critical point is a maxima. Therefore, the maxima of the function is at x=2.

In conclusion, the minima and maxima of the function y=x^4-(32/3)x^3-2x^2+2x in the interval [0,3] are:
- Maxima: x=2
- Minima: None

Learn more about Minima and Maxima

brainly.com/question/29562544

#SPJ11

Applying Trigonometric ratios, the missing sides, expressed as radicals in simplest form are:

26. u = 3√2; v = 3

27. a = 3/2; b = 3/2

28. x = 7√2; y = 7

29. u = 5√2; v = 5√2

Radicals are mathematical expressions that involve the square root or nth root of a number or a variable.

We can express each of the missing sides in radicals using the appropriate Trigonometry ratio in each case as follows:

26. Use sine ratio to find u:

sin 45 = 3/u

u = 3/sin 45

u = 3 / 1/√2 [sin 45 = 1/√2]

u = 3 * √2/1

u = 3√2

Use tangent ratio to find v:

tan 45 = 3/v

v = 3/tan 45

v = 3/1 [tan 45 = 1]

v = 3

27. Use sine ratio to find a:

sin 45 = a / 3√2

a = 3√2 * sin 45

a = 3√2 * 1/√2 [sin 45 = 1/√2]

a = 3/2

Use cosine ratio to find b:

cos 45 = b / 3√2

b = 3√2 * cos 45

b = 3√2 * 1/√2 [cos 45 = 1/√2]

b = 3/2

28. Use cosine ratio to find x:

cos 45 = 7 / x

x = 7/ cos 45

x = 7 / 1/√2 [cos 45 = 1/√2]

x = 7 * √2/1

x = 7√2

Use tangent ratio to find y:

tan 45 = y/7

y = 7 * tan 45

y = 7 * 1 [tan 45 = 1]

y = 7

29. Use sine ratio to find u:

sin 45 = u/10

u = 10 * sin 45

u = 10 * 1/√2 [sin 45 = 1/√2]

u = 10/√2

Rationalize

u = 5√2

Use cosine ratio to find v:

cos 45 = v/10

v = 10 * cos 45

v = 10 * 1/√2 [sin 45 = 1/√2]

v = 10/√2

Rationalize

v = 5√2

Learn more about radicals on:

https://brainly.com/question/4092028

#SPJ1

The solution for x is 1/(3^16).

To solve for x, we need to convert the logarithmic equation to exponential form. The general formula for converting a logarithmic equation to an exponential equation is:

log_b(x) = y => b^y = x

In this case, the base is 3, the exponent is -2 - 6 - 8 + (1/9) - (1/9), and x is the value we are trying to find. So, we can write the exponential equation as:

3^(-2 - 6 - 8 + (1/9) - (1/9)) = x

Simplifying the exponent gives us:

3^(-16) = x

Now, we can solve for x by taking the inverse of both sides:

x = 1/(3^16)

Therefore, the solution for x is 1/(3^16).

Learn more about exponential

brainly.com/question/2193820

#SPJ11

The transformation of the equation y = -2 I x - 3 I + 3 from the parent function y = I x I includes a horizontal shift of 3 units to the right, a vertical stretch by a factor of 2, a reflection across the x-axis, and a vertical shift of 3 units up.

The transformation of the equation y = -2 I x - 3 I + 3 from the parent function y = I x I can be described as follows:

The parent function is shifted 3 units to the right. This is indicated by the "-3" inside the absolute value bars in the equation.
The parent function is vertically stretched by a factor of 2. This is indicated by the "-2" in front of the absolute value bars in the equation.
The parent function is reflected across the x-axis. This is indicated by the negative sign in front of the "2" in the equation.
The parent function is shifted 3 units up. This is indicated by the "+3" outside the absolute value bars in the equation.

In summary, the transformation of the equation y = -2 I x - 3 I + 3 from the parent function y = I x I includes a horizontal shift of 3 units to the right, a vertical stretch by a factor of 2, a reflection across the x-axis, and a vertical shift of 3 units up.

Learn more about Parent function

brainly.com/question/17939507

#SPJ11

By assuming and solving with the rectangle measurements, we get the equation, 2x^2 + 6x - 33 = 0.

Follow the steps below to reach the answer:

A region of 11 cm2 divides the two rectangles A and B.

Rectangle A has a length of x cm.

Rectangle B has a length of (x+3) cm.

Form an equation in x and demonstrate that it simplifies when given the fact that rectangle A's width is 2 cm bigger than rectangle B's width:

2x^2 + 6x - 33 = 0

Rectangle A's length and area being x and 11, respectively, results in the following for rectangle A's width: 11 / x

Rectangle B's length is equal to x + 3 and its area is equal to 11, hence its width is as follows: 11 / (x + 3)

Given that width of the rectangle, A is 2 cm Larger than the width of rectangle B, we obtain: 11/x =  (11/ ( x + 3 ) ) + 2

In addition, based on the situation, we get

11/x - 11/ (x+3) = 2 cm

Let this be equation (1)

The main challenge at hand is to change this equation into the quadratic equation's standard form.

It is obtained by multiplying both sides of equation (1) by x*(x+3). As a result, you will get,

11*(x+3) - 11x = 2x*(x+3)

11x + 33 - 11x = 2x^2 + 6x

2x^2 + 6x - 33 = 0.

Learn more about Rectangles at

brainly.com/question/29085356

#SPJ4

To solve for r, we can divide both sides of the equation by Pt: r = (A-P)/Pt

The formula A=P+Prt is used to calculate the total amount of money (A) after a certain period of time when a principal amount (P) is invested at a certain interest rate (r) for a certain amount of time (t). To solve for the specified variable r, we need to rearrange the formula and isolate r on one side of the equation. Here are the steps to do so:

Step 1: Subtract P from both sides of the equation to get:
A - P = P + Prt - P

Step 2: Simplify the right side of the equation to get:
A - P = Prt

Step 3: Divide both sides of the equation by Pt to get:
(A - P) / Pt = r

Step 4: Simplify the left side of the equation to get:
r = (A - P) / Pt

To know more about interest rate calculation here:

https://brainly.com/question/29011216#

#SPJ11

The equation (1 + 4/a+4/a²)/ (1- 8/a - 20/a² simplifies to  -(a-10)/(a+2) . (C)

The given expression can be simplified by using the distributive law of multiplication over addition and the inverse law of multiplication to simplify the denominator.

By applying these laws, the given expression becomes: (1 + 4/a+4/a²)/ (1- 8/a - 20/a² = (1 + 4/a+4/a²)/ (a² - 8a - 20) = (a+2)/(a² - 8a - 20). By further simplifying it, we get (a+2)/(a-10). Hence, the answer is C. -(a-10)/(a+2).

In order to simplify the given expression, the distributive law of multiplication over addition is used by multiplying the numerator and denominator separately with the denominator's terms.

The inverse law of multiplication is then used to simplify the denominator. This gives us the simplified expression of (a+2)/(a-10).

By substituting the values of a in the expression, we can verify the answer. If a = 5, then the expression simplifies to

To know more about distributive law click on below link:

https://brainly.com/question/30129600#

#SPJ11

Complete question:

[tex]\[ \frac{1+\frac{4}{a}+\frac{4}{a^{2}}}{1-\frac{8}{a}-\frac{20}{a^{2}}} \] a. \( \frac{a+2}{a-10} \) b. \( \frac{a+2}{a^{2}} \) c. \( -\frac{a-10}{a+2} \) d. \( \frac{4}{a-10} \)[/tex]

(1 + 4/a+4/a²)/ (1- 8/a - 20/a²) = ?

A. (a+2)/(a-10) b. (a+2)/a² C. -(a-10)/(a+2) D. 4/(a-10)

Answer:

Step-by-step explanation:

jkhnb and then efhrfehnb c3454k3

Answer:

10 cm

Step-by-step explanation:

The volume of a cylinder is:

V = πr²h

Plug in the known values:

1884 cm³ = 3.14 × r² × 6 cm

Solve for r²:

r² = (1884 cm³)/(3.14 × 6 cm)

r² = 100 cm²

Solve for r:

r = √(100 cm²)

r = 10 cm

Roland made 16 sales this week, while Vickie made 8 more sales than Roland.

An equation is an expression that shows the relationship between two or more numbers and variables. Equations can either be linear, quadratic, cubic and so on depending on the degree.

Let x represent the number of sales Roland has.

Roland earns a base of $49 plus $15 per sale. HenceL

Total earning by Roland = 15x + 49

Vickie made 8 more sales than Roland. Vickie earns a base of $145 plus $6 per sale.

Total earning by Vickie = 6(x + 8) + 145 = 6x + 193

Roland and Vickie are salespeople who earned the same amount this week, Therefore:

15x + 49 = 6x + 193

9x = 144

x = 16

Roland made 16 sales this week.

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

The numerator is \((25x^{2}+15x+9)\) and the denominator is \(2(x+2)\).

To simplify the given rational expression, we need to factor the numerator and denominator and then cancel out any common factors.

First, let's factor the numerator:
\(500x^{3}-108=4(125x^{3}-27)=4(5x-3)(25x^{2}+15x+9)\)

Next, let's factor the denominator:
\(40x^{2}+56x-48=8(5x^{2}+7x-6)=8(5x-3)(x+2)\)

Now, we can cancel out the common factor of \(4(5x-3)\) from the numerator and denominator:
\(\frac{4(5x-3)(25x^{2}+15x+9)}{8(5x-3)(x+2)}=\frac{(25x^{2}+15x+9)}{2(x+2)}\)

Therefore, the simplified rational expression is \(\frac{(25x^{2}+15x+9)}{2(x+2)}\).

In this simplified form, the numerator is \((25x^{2}+15x+9)\) and the denominator is \(2(x+2)\).

Learn more about rational expression

brainly.com/question/19585906

#SPJ11

Option:-

[tex] \: [/tex]

Given:-

[tex] \: [/tex]

Solution:-

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

or

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━━━━

hope it helps! :)

The correct answer is d. happens when A is not in [-pi/2, pi/2]. The inverse sine function, sin^-1, or arcsin, is the function that reverses the sine function.

It is defined for values in the range [-1, 1] and has a range of [-pi/2, pi/2]. This means that if A is not in the range [-pi/2, pi/2], then sin^-1 (sin A) will not equal A.

For example, if A = pi, then sin A = 0, but sin^-1 (0) = 0, not pi. This is because pi is not in the range [-pi/2, pi/2], so the inverse sine function cannot return it as an answer.

Therefore, The correct answer is d. happens when A is not in [-pi/2, pi/2].

For more about domain:

https://brainly.com/question/28135761

#SPJ11