f (x) = ¹4 - 6. Find the inverse of f(x) and its domain.
O A. f¹(x) =
6 + 4, where x #-6
O B. f¹(x) =
6 +4, where x #4
O c. f¹(x) =
¹6-4, where x 4
OD. f¹(x) = 2¹6-4, where x#-6

The vertical distance between (7, -22) and (7, 12) is 34 units.

Explanation:

We can calculate the vertical distance by finding the difference between the y-coordinates of the two points.

Vertical distance = difference in y-coordinates = 12 - (-22) = 34

Therefore, the vertical distance between the two points is 34 units.

If the base was one half as long and the height was twice as long, then the area of the triangle will be 52 in².

To find the area of a triangle, we use the formula: area = (base × height) / 2. Given that the original triangle has an area of 52 square inches, we can represent this as: 52 = (base × height) / 2.

Now, let's consider the new triangle, where the base is half as long and the height is twice as long. This can be represented as base' = base / 2 and height' = height × 2.

Using the formula for the area of the new triangle, we have: area' = (base' × height') / 2 = ((base / 2) × (height × 2)) / 2.

By simplifying the equation, we see that the factors of 2 cancel out, leaving us with: area' = (base × height) / 2.

As we know that the area of the original triangle is 52 square inches, we can conclude that the area of the new triangle will also be 52 square inches. This is because the changes to the base and height essentially cancel each other out, resulting in the same overall area.

Learn more about area here: https://brainly.com/question/23353279

#SPJ11

The length of the towel bar is 13.5 inches.

Let's use the given information to write and solve an equation for the length of the towel bar.

We know that the door is 29 inches wide and that there is a 7.75-inch distance from each end of the towel bar to the respective end of the door. Let's denote the length of the towel bar as x.

So, the total width of the door can be expressed as the sum of the two distances and the length of the towel bar:
29 = 7.75 + x + 7.75

Now, let's solve for x:
29 = 15.5 + x
x = 29 - 15.5
x = 13.5 inches

Therefore, the length of the towel bar is 13.5 inches.

To learn more about distance, refer below:

https://brainly.com/question/15172156

#SPJ11

The significant increase in the percent of filers between the under-18 group and the 18-26 group can be attributed to various factors, including age, income, and financial independence.

Firstly, individuals under the age of 18 are typically considered minors and are often dependent on their parents or guardians for financial support. As a result, they may not have any significant income that requires them to file taxes, and their income might be included in their parent's or guardian's tax return. This leads to a lower percentage of filers in the under-18 group.

On the other hand, the 18-26 age group marks the transition into adulthood, where individuals begin to gain financial independence. Many start working full-time jobs or attend college, where they may earn income through part-time jobs or internships. This increased income leads to a higher percentage of filers in the 18-26 group, as they are now responsible for filing their own tax returns.

Furthermore, the age range of 18-26 also coincides with the period where individuals are more likely to have various income sources. This includes scholarships, grants, and student loans for those attending college. These additional income sources may also contribute to the increased percentage of filers in this age group.

Lastly, as individuals become more financially independent, they may become more aware of tax benefits and deductions available to them, such as educational credits or deductions for student loan interest. This newfound awareness could encourage more people within the 18-26 age group to file taxes, leading to a higher percentage of filers.

In conclusion, the dramatic jump in the percent of filers between the under-18 group and the 18-26 group can be attributed to factors such as increased financial independence, diverse income sources, and greater awareness of tax benefits and deductions.

To know more about filers refer here:

https://brainly.com/question/29614278#

#SPJ11

Answer:

I can definitely help you with that math problem! Given the information about the bicycle wheel, we need to find the function that models the height of a spot on the edge of the wheel. We know that the wheel has a diameter of 26 inches, which means the radius is half of that, or 13 inches. Isabelle rides the bike so that the wheel makes two complete rotations per second, which means the period of the function is 1/2 second (since it takes half a second for the wheel to complete one rotation).

Using the formula for a sinusoidal function, we can write the function as h(t) = A sin(2π/B (t - h)) + k, where A is the amplitude, B is the period, h is the horizontal shift, and k is the vertical shift. We can determine the values of these parameters as follows:

- Amplitude: The amplitude is half the distance between the highest and lowest points of the function. Since the radius of the wheel is 13 inches, the highest and lowest points are 26 inches apart. Therefore, the amplitude is 13 inches.

- Period: We know that the period is 1/2 second, so B = 2π/1/2 = 4π.

- Horizontal shift: The function starts at its highest point, so there is no horizontal shift. Therefore, h = 0.

- Vertical shift: The center of the wheel is at a height of 13 inches above the ground, so the vertical shift is also 13 inches.

Putting it all together, we get the function h(t) = 13 sin(4πt) + 13, which corresponds to option C. This function models the height of a spot on the edge of the wheel as Isabelle rides the bike. I hope this explanation helps! Let me know if you have any other questions or if there's anything else I can assist you with.

MARK AS BRAINLIEST!!!

Step-by-step explanation:

Mean is less than 8

(1 + 1 + 6*8 + 10 ) / 9 = mean = 6.7

Answer:

A: The mean in less than 8

Step-by-step explanation:

Mean: Average

How to find the mean?

1. Add ALL the numbers given

     1: has 2 dots     8: has 6 dots     10: has 1 dot

so  2+6+1= 9

2. divide the result of point 1. by the amount of numbers given.

     9/3= 3

3.

  Numbers:

    1-2-3-4-5-6-7-8-9   3 is before 8 so it means it's less than 8.

The 96% confidence interval for the population mean is (764.34, 795.66) and a sample size of at least 123 bulbs is needed to be 96% confident that the sample mean will be within 10 hours of the true mean.

a) To find the 96% confidence interval for the population mean, we can use the formula:

CI = x ± z* (σ/√n)

where x is the sample mean, σ is the population standard deviation, n represents the sample size, and z* represents the critical value for the desired level of confidence.

From the given information, we have x = 780, σ = 40, n = 30, and we can find the critical value using a standard normal distribution table or a calculator. For a 96% confidence level, the critical value is 1.750.

When these values are entered into the formula, we get:

CI = 780 ± 1.750 * (40/√30)

CI = 780 ± 15.66

Therefore, the 96% confidence interval for the population mean is (764.34, 795.66).

b) To determine the sample size needed to be 96% confident that our sample mean will be within 10 hours of the true mean, we can use the formula:

n =[tex](z* \sigma / E)^2[/tex]

where z* is the crucial value for the desired level of confidence, standard deviation is the population standard deviation , E is the maximum error or margin of error, and n is the sample size.

From the given information, we have z* = 1.750, σ = 40, and E = 10. When these values are entered into the formula, we get:

[tex]n = (1.750 * 40 / 10)^2[/tex]

n = 122.5

Therefore, we need a sample size of at least 123 bulbs to be 96% confident that our sample mean will be within 10 hours of the true mean.

Learn more about Standard deviation:

brainly.com/question/18562832

#SPJ4

The volume of the gift box shaped like a rectangular prism whose dimensions are 8.5 in wide, 5 in long, and 5.1 in tall is 216.75 in³ .

The volume of rectangular prism = L × W × H

L = Length of the rectangular prism

W = Width of the rectangular prism

H = Height of the rectangular prism

Here, L = 5 in , W = 8.5 in , H = 5.1 in

The volume of rectangular prism = 5 × 8.5 × 5.1

The volume of rectangular prism = 216.75 in³

The volume of gift box shaped like a rectangular prism is 216.75 in³ .

To know more about volume click here :

https://brainly.com/question/1578538

#SPJ1

We can predict with 99% confidence that a new employee with 9 hours of training will produce between -4.16 and 3.49 defects per countertop.

To find the 99% prediction interval for the number of defects per countertop for an employee with 9 hours of training, we can use the estimated regression equation and the standard error provided.

The 99% prediction interval is given by:

Predicted value ± t(0.995, n-2) x SE

where t(0.995, n-2) is the t-score for the 99% confidence level with n-2 degrees of freedom (where n is the sample size), and SE is the standard error.

First, we need to calculate the predicted value:

Defects per Countertop = 6.717822 - 1.004950(Hours of Training)

Defects per Countertop = 6.717822 - 1.004950(9)

Defects per Countertop = -0.334578

Next, we need to find the t-score for the 99% confidence level with 8 degrees of freedom (n-2 = 10-2 = 8). Using a t-distribution table or calculator, we find that t(0.995, 8) = 3.355387.

Finally, we can calculate the 99% prediction interval:

-0.334578 ± 3.355387 x 1.2297787

This simplifies to:

-4.157722 < Defects per Countertop < 3.488566

Therefore, we can predict with 99% confidence that a new employee with 9 hours of training will produce between -4.16 and 3.49 defects per countertop. However, since the lower limit is negative, it does not have practical meaning in this context. Therefore, we can conclude that we can predict with 99% confidence that a new employee with 9 hours of training will produce between 0 and 3.49 defects per countertop.

To learn more about number of defects visit: https://brainly.com/question/28136594

#SPJ11

The expected number of defective items and the probability of at least 4 are defective is equal to 3.6 and 0.370 or 37.0%.

Total number of items 'n' = 18

Probability of an item being defective 'p' =20%

                                                                    = 0.2  

Expected number of defective items,

Use the formula for the expected value of a binomial distribution,

E(X) = np

where X is the number of defective items.

Plug in the values we have,

E(X) = 18 x 0.2

      = 3.6

Expect average items out of 18 to be defective = 3.6  .

Probability that at least 4 items are defective,

Calculate the probability of 4, 5, 6, ..., 18 defective items

Use the complement rule to simplify it,

P(at least 4 defective)

= 1 - P(less than 4 defective)

Using the CDF function,

'binomcdf' is the binomial cumulative distribution function.

18 is the number of trials,

0.2 is the probability of success,

And 3 is the maximum number of successes

P(less than 4 defective)

= binomcdf (18, 0.2, 3)

= P(X <= 3)

=[tex]\sum_{x=0}^{3}[/tex] ¹⁸Cₓ × (0.2)^x × (0.8)^(18-x)

= ¹⁸C₀× (0.2)^0 × (0.8)^(18-0) + ¹⁸C₁× (0.2)^1 × (0.8)^(18-1) + ¹⁸C₂× (0.2)^2 × (0.8)^(18-2) + ¹⁸C₃× (0.2)^3 × (0.8)^(18-3)

= (0.8)^(18) + 18× (0.2) × (0.8)^(17) + 153 × (0.04) × (0.8)^(16) + 1632× (0.008) × (0.8)^(15)

= 0.630

Plug in the values,

P(at least 4 defective)

= 1 - 0.630

= 0.370

Therefore, the expected items to be defective and probability that at least 4 items out of 18 are defective is equal to 3.6 and 0.370 or 37.0%.

Learn more about probability here

brainly.com/question/15299221

#SPJ4

The total length of the ramp is 222.18 inches

Let's denote the length of the incline and decline pieces by x, and use the given information to form an equation in terms of x:

Length of incline + length of decline = 2(13√37) inches

= 26√37 inches

The total length of the ramp is the sum of the lengths of all three sections:

Total length = Length of incline + Length of center + Length of decline

Total length = 26√37 inches + 10√41  inches

Total length = 222.18 inches

Therefore, the total length of the ramp is 222.18 inches

Read more about Total Length at: https://brainly.com/question/2217700

#SPJ1

a) The resulting true speed of the boat is approximately 5.39 m/s.

b) The compass direction of the boat is 21.8° south of east.

c) The distance downstream the boat will land on the shore if the river is 800 meters wide is 320 meters.

a) To find the true speed of the boat, we can use the Pythagorean theorem. Since the boat's speed is 5 m/s due east and the current's speed is 2 m/s due south, we can treat these as perpendicular vectors. The true speed can be found using the formula:

True Speed = √((5 m/s)² + (2 m/s)²) = √(25 + 4) = √29 ≈ 5.39 m/s

b) To find the compass direction of the boat, we can use the inverse tangent function. The angle θ can be calculated using:

θ = arctan(opposite/adjacent) = arctan(2 m/s / 5 m/s) ≈ 21.8°

Since the boat is headed east and the current is pushing it south, the true direction is 21.8° south of east.

c) To find the distance downstream where the boat will land, we first need to calculate the time it takes to cross the river. The boat's speed across the river (due east) is 5 m/s and the width of the river is 800 meters. The time taken to cross the river is:

Time = Distance / Speed = 800 m / 5 m/s = 160 seconds

Now, we can use the time to find the distance downstream by multiplying the current's speed (2 m/s) by the time:

Distance downstream = 2 m/s × 160 s = 320 meters

So, the boat will land 320 meters downstream from its starting point on the opposite shore.

To know more about speed, refer to the link below:

https://brainly.com/question/13583010#

#SPJ11

In the given diagram, the value of x in the right triangle is approximately 14.7

From the question, we are to calculate the value of x in the given diagram.

In the given diagram, we have two right triangles.

First, we will calculate the value of the side joining the two triangles.

Let the side joining the two triangles be d

Thus,

From the Pythagorean theorem, we can write that

d² = a² + b²

d² = 10² + 6²

d² = 100 + 36

d² = 136

Now, in the other triangle

Also, using the Pythagorean theorem, we can write that

x² = c² + d²

x² = 9² + 136

x² = 81 + 136

x² = 217

x = √217

x = 14.7309

x ≈ 14.7

Hence, the value of x is approximately 14.7

Learn more on Solving right triangles here: https://brainly.com/question/27165976

#SPJ1

The equation of the circle with center at the origin and radius 16 is x^2 + y^2 = 256.

To find the equation of a circle with center at the origin and radius 16, we can use the general equation of a circle:

x^2 + y^2 = r^2

where (x, y) are the coordinates of any point on the circle, and r is the radius.

In this case, the center is at the origin, so the coordinates (x, y) are both 0. The radius is given as 16. Plugging these values into the equation, we have:

0^2 + 0^2 = 16^2

0 + 0 = 256

Thus, the equation of the circle is:

x^2 + y^2 = 256

So, the equation of the circle with center at the origin and radius 16 is x^2 + y^2 = 256.

To know more about radius, refer here :

https://brainly.com/question/31831831#

#SPJ11

By law of cosine, the triangle has a side of 1.348 units and two angles of 129.852° and 35.148°, respectively.

In this problem we find the representation of a triangle, in which we must determine the value of a missing side and two missing angles. This can be done by law of cosine. First, find the missing side:

x = √(3² + 4² - 2 · 3 · 4 · cos 15°)

x = 1.348

Second, find the missing angles:

4² = 3² + 1.348² - 2 · 3 · 1.348 · cos α

cos α = - 0.641

α = 129.852°

β = 180° - 15° - 129.852°

β = 35.148°

To learn more on law of cosine: https://brainly.com/question/13098194

#SPJ1

(a) The weight's velocity as a function of time t in seconds is v(t) = 16 - 32.2t

(b) The height (in feet) of the weight above the ground as a function of time is s(t) = 186 + 16t - (1/2)(32.2)t^2

To find the weight's velocity and height as a function of time:

(a) The equation for velocity as a function of time is v(t) = v0 - gt,

where v0 is the initial velocity (in this case, 16 ft/s) and g is the acceleration due to gravity (32.2 ft/s^2).

Using this equation, we can find the weight's velocity as it travels upward:

v(t) = 16 - 32.2t

(b) The equation for height as a function of time is s(t) = s0 + v0t - (1/2)gt^2,

where s0 is the initial height (in this case, 186 ft).

Using this equation, we can find the height of the weight above the ground at any point in time:

s(t) = 186 + 16t - (1/2)(32.2)t^2

To know more about Velocity:

https://brainly.com/question/2594502

#SPJ11

The probability that a customer has to wait for one of the consultants (Pw) is 0.9516.

To find the probability that a customer will have to wait for one of the consultants, we need to analyze the current system and compare it to the proposed system with two consultants. Here's a step-by-step explanation:

1. Identify the given parameters:
- Arrival rate (λ) = 7 calls per hour
- Service rate (µ) = 1 call per 8.5 minutes = 60 minutes / 8.5 minutes = 7.06 calls per hour (approximately)

2. Calculate the traffic intensity (ρ):
- ρ = λ / µ = 7 / 7.06 = 0.9915 (approximately)

3. Find the probability of 0 customers in the system (P0) for a 2-consultant system:
- P0 = 1 / (1 + (2 * ρ) + (ρ^2 / (1 - ρ))) = 1 / (1 + (2 * 0.9915) + (0.9915^2 / (1 - 0.9915))) ≈ 0.0086

4. Calculate the probability that a customer has to wait for one of the consultants (Pw):
- Pw = (ρ^2 / (2 * (1 - ρ))) * P0 = (0.9915^2 / (2 * (1 - 0.9915))) * 0.0086 ≈ 0.9516

So, there is approximately a 95.16% chance that a customer will have to wait for one of the consultants at Ocala Software Systems' technical support center when two consultants are employed.

Learn more about probability,

https://brainly.com/question/24756209

#SPJ11

The coordinates of each vertex are: P(8,4) Q(10, 4) R(13,-1) S(8,-1) then the length of side PS is 0 units.

Side PS is the bottom base of trapezoid PQRS. To find its length, we need to calculate the horizontal distance between the x-coordinates of points P and S.

The x-coordinate of point P is 8, and the x-coordinate of point S is also 8. Therefore, the horizontal distance between these two points is 0. So, the length of side PS is 0 units.

The answer is (A) 2 is not correct because the length of side PS cannot be negative or less than zero, and the length of the other base of the trapezoid (QR) is 2 units, which is not equal to the length of side PS.

To learn more about “trapezoid” refer to the https://brainly.com/question/1410008

#SPJ11

Step-by-step explanation:

We are given an angle opposite of the side length x and the hypotenuse 10.

Use SOHCAHTOA, use Sin

[tex] \sin( \alpha ) = \frac{o}{h} [/tex]

We the angle is 20

and the hypotenuse is 10 and the opposite is x.

[tex] \sin(20) = \frac{x}{10} [/tex]

[tex]10 \sin(20) = x[/tex]

And we get

[tex]x = 3.42[/tex]

Using statistics, we can calculate the following percentages:

A. The percentage of workers who receive wages between Birr 10.90 and Birr 11.90 is approximately 49.38%.

B. The percentage of workers who receive wages between Birr 10.80 and Birr 12.40 is approximately 89.15%.

C. The percentage of workers who receive wages between Birr 12.20 and Birr 13.10 is approximately 22.53%.

D. The percentage of workers who receive wages less than Birr 11.00 is approximately 1.22%.

E. The percentage of workers who receive wages more than Birr 12.95 is approximately 0.47%.

These percentages are obtained by calculating the areas under the normal distribution curve using z-scores and the standard normal distribution table.

We are given that the daily wages in a particular industry are normally distributed with a mean of Birr 11.90 and a standard deviation of Birr 0.40.

A. To find the percentage of workers who receive wages between Birr 10.90 and Birr 11.90, we need to calculate the z-scores for both values and use the standard normal distribution table.

z1 = (10.90 - 11.90) / 0.40 = -2.50

z2 = (11.90 - 11.90) / 0.40 = 0

From the standard normal distribution table, the area to the left of z = -2.50 is 0.0062, and the area to the left of z = 0 is 0.5000. Therefore, the percentage of workers who receive wages between Birr 10.90 and Birr 11.90 is:

0.5000 - 0.0062 = 0.4938, or approximately 49.38%.

B. To find the percentage of workers who receive wages between Birr 10.80 and Birr 12.40, we need to calculate the z-scores for both values.

z1 = (10.80 - 11.90) / 0.40 = -2.75

z2 = (12.40 - 11.90) / 0.40 = 1.25

From the standard normal distribution table, the area to the left of z = -2.75 is 0.0029, and the area to the left of z = 1.25 is 0.8944.

Therefore, the percentage of workers who receive wages between Birr 10.80 and Birr 12.40 is:

0.8944 - 0.0029 = 0.8915, or approximately 89.15%.

C. To find the percentage of workers who receive wages between Birr 12.20 and Birr 13.10, we need to calculate the z-scores for both values.

z1 = (12.20 - 11.90) / 0.40 = 0.75

z2 = (13.10 - 11.90) / 0.40 = 3.00

From the standard normal distribution table, the area to the left of z = 0.75 is 0.7734, and the area to the left of z = 3.00 is 0.9987. Therefore, the percentage of workers who receive wages between Birr 12.20 and Birr 13.10 is:

0.9987 - 0.7734 = 0.2253, or approximately 22.53%.

D. To find the percentage of workers who receive wages less than Birr 11.00, we need to calculate the z-score for this value.

z = (11.00 - 11.90) / 0.40 = -2.25

From the standard normal distribution table, the area to the left of z = -2.25 is 0.0122. Therefore, the percentage of workers who receive wages less than Birr 11.00 is approximately:

0.0122, or approximately 1.22%.

E. To find the percentage of workers who receive wages more than Birr 12.95, we need to calculate the z-score for this value.

z = (12.95 - 11.90) / 0.40 = 2.63

From the standard normal distribution table, the area to the left of z = 2.

To know more about statistics refer here:

https://brainly.com/question/29821285?#

SPJ11

The probability of the next elk caught in the park being unmarked can be calculated as follows:

The probability of capturing an unmarked elk in a nature reserve park can be calculated by dividing the number of unmarked elks by the total number of elks.

In this case, the number of unmarked elks is 5,400 out of a total of 5,625 elks. This gives a probability of 96% or 0.96 in decimal form. Marking and tracking animals is a common method used by scientists to study animal populations in nature reserves.

This data is crucial for designing conservation strategies that promote the survival of endangered species. Nature reserves play a crucial role in preserving and protecting wildlife and their habitats, given the significant threats they face from habitat loss, poaching, and climate change.

Learn more about probability

brainly.com/question/30034780

#SPJ11

It would take approximately 125 of the smallest cubes to fill the largest cube.

To determine the number of the smallest cubes that would fit inside the largest cube, we need to calculate the volume of both cubes.

The volume of a cube can be calculated by multiplying the length of one side by itself three times (since a cube has three equal sides). So, the volume of the smallest cube would be 1.5 x 1.5 x 1.5 = 3.375 cubic inches.

The volume of the largest cube can be calculated in the same way. The length of one side is 7.5 inches, so the volume would be 7.5 x 7.5 x 7.5 = 421.875 cubic inches.

To determine how many of the smallest cubes would fit inside the largest cube, we need to divide the volume of the largest cube by the volume of the smallest cube. So, 421.875 divided by 3.375 equals approximately 125.

To learn more about cube click on,

https://brainly.com/question/29596119

#SPJ4

It takes approximately 500 seconds for light to travel from the Sun to Earth.

To calculate the time it takes for light to travel from the Sun to Earth, we can use the formula:

time = distance / speed

Given:

Distance from the Sun to Earth = 9.3 x 10^7 miles

Speed of light = 1.86 x 10^5 miles per second

Plugging in the values into the formula, we have:

time = (9.3 x 10^7 miles) / (1.86 x 10^5 miles per second)

To simplify, we can divide the numerator and denominator by 10^5 to cancel out the units:

time = (9.3 x 10^7) / (1.86 x 10^5) seconds

Next, we can divide the numbers in scientific notation:

time = (9.3 / 1.86) x (10^7 / 10^5) seconds

Simplifying further:

time = 5 x 10^2 seconds

Therefore, light takes approximately 500 seconds to travel from the Sun to Earth.

To learn more about distance time

https://brainly.com/question/13388824

#SPJ11

The percentile rank for a score of 80 is 70%.

The percentile rank for a score of 68 is 57%.

Carmela's percent score is 77.25%.

Carmela's percentile rank is 75%.

Carmela is eligible for a job with the government.

a) For a score of 80, there are 21 out of 30 scores that are equal to or less than 80

Therefore, the percentile rank for a score of 80 is (21/30) x 100% = 70%.

b) For a score of 68, there are 17 out of 30 scores that are equal to or less than 68.

Therefore, the percentile rank for a score of 68 is (17/30) x 100% = 57%.

2a) Carmela's percent score is (618/800) x 100% = 77.25%.

b) Carmela's percentile rank:

520 individuals scored less than Carmela's score of 618.

Therefore, her percentile rank is (520/700) x 100%

Carmela's percentile rank = 75%.

c) To be in the top 20% of individuals writing the exam, Carmela's score needs to be greater than or equal to the score of the 80th percentile.

The score of the 80th percentile is 0.8 * 700 = 560.

Therefore, the top 20% of individuals scored 560 or higher.

Carmela's score of 618 places her in the top 20% of individuals and makes her eligible for a job with the government.

Learn more about percentile rank at: https://brainly.com/question/28839672

#SPJ1

The distance from the tower that you will receive the phone service is: 34 units

The general form of the equation of a circle is:

(x – h)² + (y – k)² = r²

where:

(h, k) represents the location of the circle's center.

r represents the length of its radius.

We are given the equation that represents the service that a cell phone tower provides. The equation is:

x² + y² = 1156

Expressing in standard form of equation of a circle gives:

(x – 0)² + (y – 0)² = 34²

Thus, r = 34 will denote the distance from the tower that you will receive the phone service

Read more about Equation of Circle at: https://brainly.com/question/1506955

#SPJ4

The domain of the function is the set of all positive integers, since the sequence starts with the first term and continues indefinitely. Therefore, Rosita should use the domain of positive integers for her function to generate the given sequence.

An explicit function is a mathematical expression that directly relates an independent variable to a dependent variable. In the case of Rosita's function, t(n) represents the nth term in the geometric sequence and is dependent on the value of n, the term number.

The explicit function that Rosita came up with is t(n)=160(1/2)^n, which can be simplified to t(n)=80(1/2)^(n-1). This function represents the relationship between the term number and the corresponding value in the sequence.

To determine the domain of the function, we need to consider the values of n that generate the given sequence. Looking at the sequence, we can see that the first term is 80 and each subsequent term is half of the previous term. This means that the sequence is generated by multiplying 80 by (1/2) raised to a power. We can write this as:

80(1/2)^(n-1)

where n is the term number. The domain of the function is the set of all positive integers, since the sequence starts with the first term and continues indefinitely. Therefore, Rosita should use the domain of positive integers for her function to generate the given sequence.

To know more about positive integers, visit:

https://brainly.com/question/18380011#

#SPJ11

The expressions equivalent to 6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66 are 1296\cdot396\cdot2376 and 839808\cdot36.

We can use the associative property of multiplication to group the factors in different ways while preserving their product. For example, we can group the first four 6's together and then multiply by the remaining 6 and 66:

6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66 = (6\cdot6\cdot6\cdot6)\cdot(6\cdot66)\cdot(6\cdot6\cdot66)

= 1296\cdot396\cdot2376

Alternatively, we can group the last two 6's together and then multiply by the remaining factors:

6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66 = (6\cdot6\cdot6\cdot6\cdot66)\cdot(6\cdot6)

= 839808\cdot36 is the equivalent expression.

Learn more about Equivalent

https://brainly.com/question/14323743

#SPJ11

The accurate comparison of diameters of the given planets is 7, under the given condition that Neptune is  5 x 10⁴ kilometers in diameter. Mars is  7 x 10³ kilometers in diameter.

Therefore the correct answer for the given question is Option A

The diameter of Neptune is approximately counted to be  50,000km while the diameter of Mars is approximately  counted to be 7,000 km.

The ratio of the diameters of Neptune and Mars is given as:

diameter of Neptune / diameter of Mars

= 50,000km / 7,000km

= 7.14

≈ 7 times

The  Neptune diameter is 7 times greater Mars  diameter.

To learn more about diameter

https://brainly.com/question/30959895

#SPJ4

The complete question is

Neptune is approximately 5 x 10⁴ kilometers in diameter. Mars is approximately 7 x 10³ kilometers in diameter. Which is an accurate comparison of the diameters of these two planets?

A. The diameter of Neptune is more than 7 times greater than the diameter of Mars.

B. The diameter of Mars is more than 7 times greater than the diameter of Neptune.

C. The diameter of Neptune is about 1.4 times greater than the diameter of Mars.

D. The diameter of Mars is about 1.4 times greater than the diameter of Neptune. ​