The right answer is capillaries that metabolites like salts and food molecules are exchanged in capillaries together with waste products, oxygen, and carbon dioxide.
Where does the exchange of food and garbage take place?In the capillaries, waste, nutrients, and gases are delivered from the blood to the tissue. Little blood arteries called capillaries create networks surrounding body cells by branching off from arterioles.
Which occurs first, gas exchange in arteries or veins?It is supplied to the blood during gas exchange from the lungs. Both the lungs and blood exchange carbon dioxide at the same time. The capillaries, a network of tiny blood veins found in the walls of the alveoli, are where this occurs in the lungs in between the individual alveoli.
To know more about oxygen visit:-
https://brainly.com/question/14386958
#SPJ9
During the 1986 accident in Chernobyl nuclear power plant located in the former Soviet
Union, radioactive strontium was released into the environment. There was a concern that
if strontium were ingested, then this radioactive nuclide would be incorporated into parts
of the body where large amounts of Ca are deposited in the workers' bodies such as in the
bones and the teeth. Based upon of the positions of Sr and Ca in the periodic table, explain
the logic of this concern.
In the periodic table, strontium (Sr) and calcium (Ca) both belong to Group 2A, sometimes referred to as the alkaline earth metals.
What impact did the Chernobyl disaster have on the natural world?After the disaster, radioactive substances were primarily spread by contaminated rain on open surfaces like lawns, parks, roadways, and building roofs. Due to the effects of wind, rain, traffic, street washing, and cleanup since then, there is less surface contamination in metropolitan areas.
What natural factors led to the explosion at the Chernobyl power plant?At least 5% of the radioactive reactor core was discharged into the atmosphere following the steam explosion and fires.
To know more about radioactive visit:-
https://brainly.com/question/7180704
#SPJ1
How many milliliters of an aqueous solution of 0.124 M silver fluoride is needed to obtain 17.8 grams of the salt? mL
We need 117.76 mL volume of the aqueous solution of 0.124 M silver fluoride to obtain 17.8 grams of the salt.
What is volume?
To solve this problem, we can use the formula:
mass = molarity x volume x molar mass
where mass is the mass of the solute (in grams), molarity is the concentration of the solution (in moles per liter), volume is the volume of the solution (in liters), and molar mass is the mass of one mole of the solute (in grams per mole).
First, we need to calculate the molar mass of silver fluoride (AgF):
AgF = 1 x 107.87 + 1 x 18.998 = 126.868 g/mol
Next, we can rearrange the formula above to solve for volume:
volume = mass / (molarity x molar mass)
Substituting the given values:
volume = 17.8 g / (0.124 mol/L x 126.868 g/mol)
volume = 117.76 mL
Therefore, we need 117.76 mL of the aqueous solution of 0.124 M silver fluoride to obtain 17.8 grams of the salt.
To know more about molar mass, visit:
https://brainly.com/question/22997914
#SPJ1
Complete question is: 117.76 milliliters of an aqueous solution of 0.124 M silver fluoride is needed to obtain 17.8 grams of the salt.
How many moles of copper are required to replace silver from 4.0 moles of silver nitrate?
Answer: 2.0 moles of copper are required to replace silver from 4.0 moles of silver nitrate.
Explanation:
The chemical equation for the reaction between copper and silver nitrate is:
Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag
From this equation, we can see that 1 mole of copper reacts with 2 moles of silver nitrate.
To find how many moles of copper are required to replace silver from 4.0 moles of silver nitrate, we need to use the mole ratio between copper and silver nitrate.
1 mole of copper reacts with 2 moles of silver nitrate, so:
1 mole Cu / 2 moles AgNO3
To calculate how many moles of copper are needed to replace 4.0 moles of silver nitrate, we can use the mole ratio as follows:
4.0 moles AgNO3 x (1 mole Cu / 2 moles AgNO3) = 2.0 moles Cu
Therefore, 2.0 moles of copper are required to replace silver from 4.0 moles of silver nitrate.
Answer:2.00 moles Cu
Explanation:4.0mol AgNO3 x 1 mol cu
/ 2 mol Ag NO3
HI + RbOH →→ Rbl + H₂O
-
In a titration experiment a 300 mL sample of hydrolodic acid (HI) 2.15 M is completely neutralized by 212 mL of an
aqueous solution of rubidium hydroxide (RbOH). What was the molarity of the initial RbOH?
6.45 M RbOH
(orange)
1.52 M RbOH
(magenta)
3.04 M RbOH
(aqua green)
The balanced chemical equation for the reaction between HI and RbOH is:
HI + RbOH → RbI + H2O
From the equation, we can see that 1 mole of HI reacts with 1 mole of RbOH to produce 1 mole of RbI and 1 mole of H2O.
To determine the molarity of the initial RbOH, we can use the following formula:
Molarity of RbOH = (moles of RbOH) / (volume of RbOH solution in liters)
First, let's calculate the number of moles of HI in the 300 mL sample:
moles of HI = Molarity x volume in liters
moles of HI = 2.15 mol/L x 0.3 L
moles of HI = 0.645 mol
Since 1 mole of HI reacts with 1 mole of RbOH, the number of moles of RbOH used in the titration is also 0.645 mol.
Now, we can use the volume and concentration of the RbOH solution to calculate its molarity:
Molarity of RbOH = (moles of RbOH) / (volume of RbOH solution in liters)
Molarity of RbOH = 0.645 mol / 0.212 L
Molarity of RbOH = 3.04 M
Therefore, the molarity of the initial RbOH solution was 3.04 M, which corresponds to the aqua green option.
Answer:
The balanced chemical equation for the reaction between hydriodic acid (HI) and rubidium hydroxide (RbOH) is:
HI + RbOH → RbI + H2O
From the balanced equation, we can see that the stoichiometry of the reaction is 1:1, which means that 1 mole of HI reacts with 1 mole of RbOH.
Given that a 300 mL sample of HI with a concentration of 2.15 M is completely neutralized by 212 mL of RbOH, we can use the following equation to determine the molarity of RbOH:
Molarity of HI x Volume of HI = Molarity of RbOH x Volume of RbOH
2.15 M x 0.300 L = Molarity of RbOH x 0.212 L
Molarity of RbOH = (2.15 M x 0.300 L) / 0.212 L = 3.04 M
Therefore, the molarity of the initial RbOH solution was 3.04 M, option (aqua green).
Mary Shelley wrote Frankenstein as a teenager for a ghost story contest between friends.
True
False
Fluoride, a very stable form of fluorine, is often added to toothpaste and drinking water to prevent
tooth decay. What is the formula of this species?
a. F
b. Fl-
C. Fl+
d. F²-
In order to calculate the moles of Oxygen needed to react with
5g of Diethylzinc, what other information will we need in
addition to the chemical equation?
O A The molar mass of all elements, number of atoms of
Oxygen, and the time the reaction took to complete.
O B. A balanced chemical equation and the molar mass of
all elements.
OC. The number of moles for each element and the
number of atoms in each substance.
OD. The number of atoms in each reactant and product.
B. A balanced chemical equation and the molar mass of all elements are needed in order to calculate the moles of Oxygen needed to react with 5g of Diethylzinc.
What is the moles?To calculate the moles of Oxygen needed to react with 5g of Diethylzinc, we need a balanced chemical equation and the molar mass of all elements involved. The balanced chemical equation will provide us with the stoichiometric ratio between Diethylzinc and Oxygen in the reaction, while the molar mass of Oxygen will allow us to convert the given mass of Diethylzinc into moles
Therefore, The balanced chemical equation will tell us the mole ratio of Diethylzinc and Oxygen, and the molar mass of Oxygen will be used to convert the given mass of Diethylzinc to moles.
Read more about Oxygen here:
https://brainly.com/question/26073928
#SPJ1
For the following reaction, 8.43 grams of silicon tetrafluoride are allowed to react with 7.68 grams of water . Silicon tetrafluroide (s) + water (l) -> hydrofluoric acid (aq) + silicon dioxide (s) What is the maximum amount of hydrofluoric acid that can be formed? What is the formula for the limiting reactant? What amount of the excess reactant remains after the reaction is complete?
We must identify the limiting reactant and use that information to compute the maximum amount of hydrofluoric acid that can be produced in order to provide answers to these questions. Calculating the quantity of extra reactant left behind after the reaction is finished is also necessary.
What in chemistry is a "limiting reagent"?A limiting reagent is a reactant in a chemical reaction that controls how much product is created, according to the definition of the term. Because the reactions between the elements and compounds in a balanced chemical equation depend on their mole ratios, the use of a limiting reactant is necessary.
A Limiting Reactant is what?A substance that takes part in a chemical reaction is known as a limiting reactant. It establishes the maximum product amount that
To know more about tetrafluoride visit:-
brainly.com/question/27590943
#SPJ1
A pure copper cube has an edge length of 3.00 cm
How many copper atoms does it contain? (volume of a cube = (edge length)^3
; density of copper = 8.96 g/cm^3)
Since this equals (edge length)3, the cube's volume is 3 * 1.12 cm, or 3.36 cm3. As a result, the cube has 3.36/8.96 g/cm3 = 0.43 grammes of copper atoms.
What is the perimeter of a volumetric cube?V= s3, where s is the length of one of the cube's edges, is the formula for a cube's volume. The length of the edge is equal to the volume's cube root, or 4 cm, if the volume is 64.
How do I figure out the atom count?To get the number of moles in an element or compound, divide the supplied mass by the element or compound's molar mass.
To know more about copper visit:-
brainly.com/question/26474177
#SPJ1
How does your model explain why the distribution of water storage traits changed over time?
It should be noted that to explain why the distribution of water storage traits changed over time, a model could employ various techniques from statistical analysis and machine learning.
How to explain the modelOne possible approach is as follows:
Data Collection: Gather data on water storage traits for a given population over a specific period. The data could include measurements of leaf water potential, stomatal conductance, osmotic adjustment, and other relevant traits.
Data Preprocessing: Clean the data, remove outliers, and normalize the data if necessary.
Exploratory Data Analysis: Conduct a visual and statistical analysis of the data to identify trends, patterns, and correlations. This could include scatterplots, histograms, boxplots, and correlation matrices.
Time-Series Analysis: Use time-series analysis techniques to investigate changes in the distribution of water storage traits over time. This could include fitting time-series models, decomposing the time series, and analyzing the autocorrelation and seasonality of the data.
Hypothesis Testing: Develop hypotheses about why the distribution of water storage traits changed over time, and test these hypotheses using statistical tests such as t-tests, ANOVA, and regression analysis.
Learn more about water on
https://brainly.com/question/1313076
#SPJ1
What is the molar mass of Hydrochloric Acid?
Answer:
Explanation:
Hydrochloric acid (HCl) is a binary acid composed of hydrogen and chlorine. The molar mass of hydrochloric acid can be calculated by adding the atomic weights of hydrogen and chlorine.
The atomic weight of hydrogen is 1.008 g/mol, and the atomic weight of chlorine is 35.45 g/mol. Therefore, the molar mass of hydrochloric acid (HCl) is:
Molar mass of HCl = 1 x atomic weight of hydrogen + 1 x atomic weight of chlorine
bash
= 1 x 1.008 g/mol + 1 x 35.45 g/mol
= 36.46 g/mol
Therefore, the molar mass of hydrochloric acid (HCl) is 36.46 g/mol.
If water is added to an acid, which describes how the pH of the solution will change?
A. increase
B. decrease
C. no change
D. increase then decrease
E. decrease then increase
Acid will be diluted by water, resulting in a reduction in the concentration of H+ ions. As a result, the solution's pH will rise.
What happens when acid is combined with water?The exothermic reaction that occurs when concentrated acid is mixed with water might result in burns due to the heat that is produced. On the other hand, when acid is gradually added to water while swirling continuously.
When water was added, what happened to the pH of the solution?A basic solution's pH lowers and its hydroxide ion concentration decreases when water is added to it. The pH of the solution drops gradually toward 7 as additional water is added, and it gradually becomes less alkaline.
To know more about concentration visit:-
https://brainly.com/question/10725862
#SPJ1
2 moles of calculate the pressure exerted by Co₂ Gas at 27°C and Volume of 4 litres: (dm³)
If you have 5.36 moles of C2H4O2, how many molecules of C2H4O2 would you have?
Answer: 3.23 x 10^23
Explanation: The number of molecules is found when the number of moles is multiplied by Avogadro's number, which is 6.022 x 10^23
5.36 moles x 6.022 x10^23 = 3.23 x 10^23
If 6.25 g of CuNO3 is dissolved in water to make a 0.840 M solution, what is the volume of the solution in milliliters?
The volume of the solution is 39.6 mL. Solutions can be formed by dissolving solids, liquids, or gases in a liquid solvent or by dissolving gases in a solid solvent.
What is Solution?
A solution is a homogeneous mixture of two or more substances in which the components are uniformly distributed on a molecular or ionic level. In a solution, the substance that is present in the largest amount is called the solvent, and the substance that is present in smaller amounts is called the solute.
We can use the following formula to calculate the volume of the solution:
Molarity (M) = moles of solute (n) / volume of solution in liters (V)
First, we need to calculate the number of moles of Cu(NO3)2:
mass of Cu(NO3)2 = 6.25 g
molar mass of Cu(NO3)2 = 187.56 g/mol (63.55 g/mol for Cu + 2x14.01 g/mol for N + 6x16.00 g/mol for O)
moles of Cu(NO3)2 = mass / molar mass = 6.25 g / 187.56 g/mol = 0.0333 mol
Next, we can rearrange the formula to solve for the volume of the solution:
V = n / M
V = 0.0333 mol / 0.840 M = 0.0396 L
Finally, we convert the volume to milliliters:
V = 0.0396 L x 1000 mL/L = 39.6 mL
Learn more about Solution from the given link
https://brainly.com/question/25326161
#SPJ1
What is the same on the left and right side of a balanced equation?
The total number of atoms for each element in a chemical equation that is balanced is the same on both sides of the equation.
What is the same on each side of an equation that is balanced?An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction.
Why is a chemical equation need to be balanced?For the chemical equation to adhere to the rule of conservation of mass, it must be balanced. A chemical equation is said to be balanced when the number of various elemental atoms on the reactants and products sides are equal.
To learn more about balanced equations visit:
brainly.com/question/2399130
#SPJ1
I am wondering how to solve these
The balanced chemical equations are as follows:
Sb + 3O₂ → Sb₄O₆
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
Fe₂O₃ + 3CO → 3CO₂ + 2Fe
PCl₅ + 4H₂O → 5HCl + H₃PO₄
H₂S + 4Cl₂ → 8HCl + S₈
3Fe + 4H₂O → Fe₃O₄ + 4H₂
N₂ + 3H₂ → 2NH₃
What is a balanced chemical equation?A balanced chemical equation is a mathematical representation of a chemical reaction that uses chemical formulas for reactants and products. It shows the number of atoms of each element involved in the reaction and ensures that the law of conservation of mass is obeyed. In a balanced chemical equation, the number of atoms of each element on the left side (reactants) is equal to the number of atoms of the same element on the right side (products).
A chemical equation is balanced by adjusting the coefficients (numbers in front of the chemical formulas) of the reactants and products so that the number of atoms of each element is equal on both sides of the equation. The coefficients must be in the smallest possible whole-number ratios.
To know more about reactants, visit:
https://brainly.com/question/17096236
#SPJ1
A certain experiment generates hydrogen gas, which is collected over water. The temperature is 283 K and the atmospheric pressure is 0.97 atm. What is the partial pressure of H2?
Answer:
partial pressure of H2 = 0.9574 atm OR 727.6 mmHg
Explanation:
in case of collection of gas over water:
[tex]P_{atm} = P_{vapor} + P{gas}[/tex]
[tex]P_{atm}[/tex]: atmospheric pressure
[tex]P_{vapor}[/tex]: pressure of water vapor (must be given in the question!)
[tex]P_{gas}[/tex]: pressure of gas
in this question:
water vapor pressure at 283K (10°C) = 9.6 mmHg (again, this must be given in the question)
Given: [tex]P_{atm}[/tex] = 0.97 atm = 737.2 mmHg
by substitution in the formula:
737.2 = 9.6 + [tex]P_{H_2}[/tex]
[tex]P_{H_2}[/tex] = 727.6 mmHg = 0.9574 atm
How many atoms of boron are present in 2.29 moles of boron trifluoride?
2.29 moles of boron trifluoride contain 1.38 10²⁴ atoms of boron.
The amount of atoms in boron trifluoride.One boron atom and three fluorine atoms make up the trigonal planar molecule known as boron trifluoride.
The atomic masses of boron (B) and fluorine (F), which are 10.81 g/mol and 18.99 g/mol respectively, may be added to determine the molar mass of boron trifluoride (BF3).
Molar mass of BF3 = (1 × molar mass of B) + (3 × molar mass of F)
Molar mass of BF3 = (1 × 10.81 g/mol) + (3 × 18.99 g/mol)
Molar mass of BF3 = 67.81 g/mol
Now we can calculate the number of moles of BF3 using its given mass:
Mass of BF3 / molar mass of BF3 equals moles of BF3.
moles of BF3 = 2.29 moles
1 mole of BF3 contains 1 mole of B
1 mole of B contains Avogadro's number (6.02 × 10²³) atoms of B
Therefore, the number of atoms of boron in 2.29 moles of BF3 is:
2.29 moles of BF3 x (1 mole of B / 1 mole of BF3) x (6.02 × 10²³ atoms of B / 1 mole of B) = 1.38 × 10²⁴ atoms of B.
To know more about boron trifluoride visit:-
https://brainly.com/question/9356683
#SPJ1
How could an astronaut benefit from a gyroscope during their training?
Gyroscope training is advantageous for astronauts because it improves their coordination, balance, and spatial orientation in a microgravity simulation. Also, it can enhance their capacity for jobs in space and help them become less prone to motion sickness.
What function does a gyroscope serve in space?Gyroscopes in spacecraft alert the onboard computer when the craft has changed orientation (direction and pointing). The stabilising system for the spaceship receives the data from the computer after that.
What kind of training is required for astronauts to travel to space?To become a fully qualified astronaut, you may need to complete up to two years of training. The International Space Station and the Space Shuttle must be introduced to candidates.
To know more about coordination visit:-
https://brainly.com/question/27289242
#SPJ9
Butanedione, a component of butter and body odor, has a cheesy smell. Elemental analysis of butanedione gave the mass percent composition:
C: 55.80%
H: 7.03%
O: 37.17%
The molar mass of butanedione is 86.09 g/mol
Determine the molecular formula of butanedione.
Answer:
The molecular formula of butanedione = C4 h6 O2
when 23ml of 0.100 m agno3 is combined with 27ml ml of 0.1000 m hcl in a coffe-cup calorimeter the temperature changes from 23.81 to 24.62 celcius calculate change in enthalkpy
The change in enthalpy for the reaction is -7.57 × 10^4 J/mol. This negative value indicates that the reaction is exothermic, meaning it releases heat to the surroundings.
To calculate the change in enthalpy, we need to use the equation:
ΔH = -q / n
where ΔH is the change in enthalpy, q is the heat absorbed or released by the reaction, and n is the number of moles of limiting reactant.
First, we need to determine the limiting reactant. This can be done by comparing the number of moles of each reactant:
moles of AgNO3 = (23 mL) x (0.100 mol/L) = 0.0023 mol
moles of HCl = (27 mL) x (0.1000 mol/L) = 0.0027 mol
Since AgNO3 has a smaller number of moles, it is the limiting reactant.
Next, we need to calculate the heat absorbed or released by the reaction. We can do this using the equation:
q = m × c × ΔT
where q is the heat absorbed or released, m is the mass of the solution, c is the specific heat capacity of the solution, and ΔT is the temperature change.
Assuming the specific heat capacity of the solution is 4.18 J/(g·K) and the density of the solution is 1.00 g/mL, we can calculate the mass of the solution:
mass of solution = (23 mL + 27 mL) × (1.00 g/mL) = 50 g
Substituting the values, we get:
q = (50 g) × (4.18 J/(g·K)) × (24.62°C - 23.81°C) = 174.5 J
Finally, we can calculate the change in enthalpy using the equation:
ΔH = -q / n
ΔH = -(174.5 J) / (0.0023 mol) = -7.57 × 10^4 J/mol
To learn more about enthalpy
https://brainly.com/question/13996238
#SPJ4
Which of the following electron models is the one currently accepted by modern science?
A.) Dalton's Billiard Ball.
B.) Thomson's Plum Pudding Model.
C.) Schrodinger's Quantum Mechanical Model.
D.) Rutherford-Bohr Planetary Model.
Schrodinger's Quantum Mechanical Model, which is currently recognised by modern science, is the electron model. The electron cloud model is another name for this one.
What electron model is in use right now?The term "electron cloud" refers to the current atomic structure model. A physicist from Austria named Edwin Schrodinger argued that electrons do not follow static or permanent trajectories.
What atom model is considered to be the most recent?The contemporary atomic model, often known as the cloud model, depicts atoms as having a nucleus made up of protons and neutrons and a diffuse gradient or cloud surrounding it that is made up of electrons. Because electron activity is probabilistic, electrons are often depicted as clouds.
To know more about electron visit:-
https://brainly.com/question/28977387
#SPJ1
PRODUCT IDEA - create a digital poster, concept map, or other graphic organizer to show the cause and effect of at least TWO different factors that influence climate and weather.
9. Which of the following best describes the valence electrons of a crystal that is an
excellent conductor?
The valence electrons of a crystal that is an excellent conductor are typically free to move throughout the crystal lattice.
This is because the crystal has a metallic bond, which is a type of chemical bond that occurs between atoms of metallic elements. In a metallic bond, valence electrons are delocalized and can move freely throughout the crystal structure, leading to the excellent conductivity of metals.
In contrast, materials with ionic or covalent bonds have electrons that are tightly bound to individual atoms and are not free to move throughout the crystal lattice. As a result, these materials are typically poor conductors of electricity.
Therefore, the valence electrons in a crystal that is an excellent conductor are delocalized and free to move, allowing the crystal to conduct electricity efficiently.
To know more about conductivity, visit:
https://brainly.com/question/12136944
#SPJ1
If water is added to a base, which describes how the pH of the solution will change?
A. increase
B. decrease
C. no change
D. increase then decrease
E. decrease then increase
Answer: the pH would decrease
Explanation:
bases are alkaline which means that thir pH would in the category between 14 and 8
Water is neutral which meand that it's pH is at 7
so if you add water to a base then the concentration the pH would eventually decrease towards a 7
hope it helps✨✨
Chemistry Help!
1. Copper is commonly used to make electrical wires. How many moles of copper are in 5.00 grams of copper wire?
2. Our bodies synthesize protein from amino acids. One of these amino acids is glycine, which has a molecular formula of C2H5O2N. How many moles of glycine molecules are contained in 28.35 grams of glycine?
3. Vitamin C is a covalent compound with the formula of C6H8O6. The recommended daily dietary allowance of vitamin C for children aged 4-8 years is 1.42 x 10-4 mol.
a. What is the mass of this allowance in grams?
b. How many moles of carbon are in 1.42 x 10-4 mol of C6H8O6?
4. Rank the following from lowest number of particles to highest. Explain your reasoning.
2.3 mol H2O 3.5 mol H2 0.50 mol C100H202
Answer:
1. The molar mass of copper is 63.55 g/mol. To find the number of moles of copper in 5.00 grams, we divide the given mass by the molar mass:
5.00 g Cu / (63.55 g/mol Cu) = 0.0787 mol Cu
Therefore, there are 0.0787 moles of copper in 5.00 grams of copper wire.
2. The molar mass of glycine (C2H5O2N) is:
12.01 g/mol (C) + 1.01 g/mol (H) x 5 + 16.00 g/mol (O) x 2 + 14.01 g/mol (N) = 75.07 g/mol
To find the number of moles of glycine in 28.35 grams, we divide the given mass by the molar mass:
28.35 g glycine / (75.07 g/mol glycine) = 0.377 mol glycine
Therefore, there are 0.377 moles of glycine molecules in 28.35 grams of glycine.
3. a. To find the mass of 1.42 x 10^-4 mol of vitamin C, we multiply the molar mass of vitamin C (176.12 g/mol) by the number of moles:
1.42 x 10^-4 mol x 176.12 g/mol = 0.0248 g
Therefore, the mass of the recommended daily dietary allowance of vitamin C for children aged 4-8 years is 0.0248 grams.
b. The molecular formula of vitamin C is C6H8O6, so there are 6 moles of carbon for every mole of vitamin C. Therefore, there are:
1.42 x 10^-4 mol x 6 = 8.52 x 10^-4 mol of carbon
in 1.42 x 10^-4 mol of C6H8O6.
4. To rank the following from lowest number of particles to highest, we need to compare the number of particles in each of the given amounts.
2.3 mol H2O: 2.3 mol x 6.022 x 10^23 molecules/mol = 1.39 x 10^24 molecules of H2O
3.5 mol H2: 3.5 mol x 6.022 x 10^23 molecules/mol = 2.11 x 10^24 molecules of H2
0.50 mol C100H202: 0.50 mol x 6.022 x 10^23 molecules/mol = 3.01 x 10^23 molecules of C100H202
Therefore, the ranking from lowest to highest number of particles is:
0.50 mol C100H202 < 2.3 mol H2O < 3.5 mol H2.
The reasoning is based on the Avogadro's number which represents the number of particles in one mole of a substance, which is equal to 6.022 x 10^23. The substance with the smallest number of moles has the smallest number of particles, and the substance with the largest number of moles has the largest number of particles.
In Experiment 2, what was the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water? Note: Depending on the actual amount of water dispensed in the lab, there is a range of possible answers. Pick the value that is closest to yours.
The correct answer is d) It depends on the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor.
The pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water cannot be determined without additional information, such as the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor. These factors would need to be known in order to calculate the final pressure of the gas using the ideal gas law.
Therefore, it is important to have accurate experimental data and perform proper calculations to determine the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water.
To learn more about butane gas visit;
https://brainly.com/question/15123098
#SPJ4
Correct question:
What is the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water in Experiment 2?
a) 1 atm
b) 2 atm
c) 3 atm
d) It depends on the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor.
True or False: Only objects with energy can perform work.
Answer: True
Explanation: Physical Quantity which enables an object to do work is Energy. When an object does work, then its work done is only possible when the object has Kinetic Energy, Potential Energy or Both (Mechanical Energy) in it.
g what are the product(s) of the hydrolysis of pentanamide with hcl? a) propanoic acid b) ammonia c) pentanoic acid d) ammonium chloride e) methyl ammonium chloride
The product of the hydrolysis of pentanamide with hcl are pentanoic acid and ammonium chloride, so correct answer would be Option C&D.
In chemistry and biology, hydrolysis refers to a double decomposition reaction in which water participates. Therefore, the hydrolysis reaction may be represented by the reversible chemical equation AB + HOH ⇌ AH + BOH, if a compound is represented by the formula AB in which A and B are atoms or groups and water is represented by the formula HOH. Other than water, the reactants in a hydrolysis reaction can be neutral molecules, as they are in the majority of cases when organic compounds are involved, or ionic molecules, as they are in the cases of salts, acids, and bases.
Visit here to learn more about the hydrolysis: https://brainly.com/question/10840252
#SPJ4