Answer: "C the long-term survival of an entire species of organisms."
Explanation:
A - Yes, reproduction of the species is part of Evolution, it is not the best answer for the question taking into account the other possible answers.
B - Evolution is not necessarily a short-term thing, Evolution occurs over a long period of time.
C - *Refer to the explanation above.*
D - This answer has more to do with Ecosystems, rather than Evolution/Natural Selection.
rna ______ is the enzyme that builds the rna chain during transcription.
RNA polymerase is the enzyme responsible for building the RNA chain during transcription, a process in which genetic information from DNA is converted into RNA molecules.
RNA polymerase binds to a specific region of DNA called the promoter and then moves along the DNA strand, unwinding it as it goes. The enzyme then uses one of the DNA strands as a template to synthesize a complementary RNA strand, adding nucleotides one by one to build the chain. The resulting RNA molecule is a copy of the genetic information stored in the DNA, and it can be used to direct the synthesis of proteins or perform other functions within the cell.
Find more about RNA polymerase
at brainly.com/question/31234372
#SPJ4
introduction: the polarity of molecules give rise to the forces that act between them. these intermolecular forces, or imfs, affect many physical properties including boiling point, solubility, viscosity, and surface tension. question: how does polarity affect the forces between molecules? observe: select the show polar molecules inset checkbox. what do you notice?
When the "show polar molecules" inset checkbox is selected, polar molecules are highlighted in a different color from nonpolar molecules. This allows us to observe the effect of polarity on intermolecular forces between molecules.
Polar molecules have a permanent dipole moment due to the electronegativity difference between the atoms in the molecule. This means that there is an uneven distribution of electrons, with one end of the molecule being more negative (due to the presence of a lone pair of electrons or a more electronegative atom) and the other end being more positive.
The presence of these dipoles results in the formation of dipole-dipole interactions, which are stronger than the London dispersion forces that nonpolar molecules experience. The greater the polarity of a molecule, the stronger the dipole-dipole interactions will be.
Therefore, when observing the polar molecules inset, we can see that polar molecules tend to be clustered together, forming stronger intermolecular forces than nonpolar molecules. This clustering can lead to higher boiling points, increased solubility in polar solvents, higher viscosity, and higher surface tension due to the stronger intermolecular forces between molecules.
To learn more about dipole-dipole interactions refer to:
brainly.com/question/30510859
#SPJ4
Find the mass, in grams, of 2.80 L CO2 at STP
Find the mass, in grams, of 15.0 mL SO2 at STP
The mass of 15.0 mL SO2 at STP is 0.0375 grams.
What is Mass?
Mass is a measure of the amount of matter in an object or substance. It is usually measured in grams (g) or kilograms (kg). Mass is a scalar quantity, meaning it has only magnitude and no direction. It is different from weight, which is the force of gravity acting on an object with mass.
For both problems, we can use the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature in Kelvin. At STP, pressure is 1 atm and temperature is 273 K.
For the first problem, we can use the molar volume of a gas at STP, which is 22.4 L/mol, to find the number of moles of CO2:
2.80 L CO2 x (1 mol CO2 / 22.4 L CO2) = 0.125 mol CO2
Then, we can use the molar mass of CO2, which is 44.01 g/mol, to find the mass:
0.125 mol CO2 x 44.01 g/mol = 5.50 g CO2
Therefore, the mass of 2.80 L CO2 at STP is 5.50 grams.
For the second problem, we need to convert the volume from milliliters to liters:
15.0 mL SO2 = 0.0150 L SO2
Then, we can use the ideal gas law to find the number of moles of SO2:
PV = nRT
n = (PV) / RT
n = (1 atm)(0.0150 L) / (0.0821 Latm/molK)(273 K) = 5.86 x [tex]10^{-4}[/tex]mol SO2
Finally, we can use the molar mass of SO2, which is 64.06 g/mol, to find the mass:
5.86 x [tex]10^{-4}[/tex]mol SO2 x 64.06 g/mol = 0.0375 g SO2
Learn more about Mass from given link
https://brainly.com/question/86444
#SPJ1
write a balanced net ionic equation for the neutralization of equimolar amounts of hno2 and koh. indicate whether the ph after neutralization is greater than, equal to, or less than 7. values of ka and kb are listed in appendix c.
The concentration of OH- after neutralization is greater than the concentration of HNO₂, and therefore the pH of the solution is greater than 7.
The balanced net ionic equation for the neutralization of equimolar amounts of HNO₂ and KOH is:
HNO₂ (aq) + OH- (aq) → NO₂⁻ (aq) + H₂O (l)
After the neutralization, the resulting solution contains the NO₂⁻ ion, which is the conjugate base of HNO₂. Since HNO₂ is a weak acid (with a pKa of 3.15, according to appendix c), the NO₂⁻ ion is a weak base. The reaction of NO₂⁻- with water is:
NO₂⁻ (aq) + H₂O (l) ⇌ HNO₂ (aq) + OH⁻- (aq)
The equilibrium constant for this reaction is Kb = [HNO₂][OH-] / [NO₂⁻].
Since NO₂⁻ is a weak base, the concentration of OH- after neutralization is greater than the concentration of HNO₂, and therefore the pH of the solution is greater than 7.
Learn more about pH on:
https://brainly.com/question/172153
#SPJ11
if ph was to decrease, while pco2 remained the same, how would [hco3-] and [co32-] change in seawater? which one would show the greater change? (explain your reasoning.)
Write the complete ground-state electron configuration of copper. For multi-digit superscripts or coefficients, use each number in succession.
The correct answer is The ground-state electron configuration of copper (Cu) can be determined by following the Aufbau principle, which states that electrons occupy.
[tex]1s^2 2s^2 2p^6 3s^2 3p^6 4s^1 3d^10[/tex]Copper has an atomic number of 29, meaning it has 29 electrons distributed among its energy levels. The first two electrons occupy the 1s orbital, followed by two in the 2s orbital and six in the 2p orbital. The next two electrons fill the 3s orbital, followed by six in the 3p orbital. The last electron occupies the 4s orbital, which is one of the outermost orbitals and has a lower energy level than the 3d orbital. This is an exception to the Aufbau principle, where the 3d orbital is usually filled before the 4s orbital. The 3d orbital, which can hold up to 10 electrons, is fully occupied in copper's ground state, giving it its unique electronic configuration.
To learn more about Aufbau principle, click on the link below:
brainly.com/question/13393709
#SPJ1
if the resulting solution has a volume of 1.7 l , what is the minimum mass of caso4(s) needed to achieve equilibrium?
The minimum mass of [tex]CaSO_{4}[/tex](s) needed to achieve equilibrium in a 1.7 L solution is approximately 4.08 grams.
How to determine the minimum mass required to achieve equilibrium?Step 1: Find the solubility of [tex]CaSO_{4}[/tex] in water at the given temperature.
The solubility of [tex]CaSO_{4}[/tex] in water at room temperature is approximately 2.4 grams per liter (g/L).
Step 2: Calculate the amount of [tex]CaSO_{4}[/tex] that will dissolve in 1.7 L of water.
Use the solubility value from Step 1:
Amount of [tex]CaSO_{4}[/tex] = Solubility × Volume
Amount of [tex]CaSO_{4}[/tex] = 2.4 g/L × 1.7 L
Amount of [tex]CaSO_{4}[/tex]4 ≈ 4.08 grams
To know more about Solubility:
https://brainly.com/question/9427426
#SPJ11
a 1.20 gram sample of ammonium phosphate is dissolved in 100. ml of water. the solution is poured into 50.0 ml of a 1.5 m magnesium nitrate solution. what mass (g) of solid product will be produced if the reaction runs to completion?
A 1.20 gram sample of ammonium phosphate is dissolved in 100. ml of water, the solution is poured into 50.0 ml of a 1.5 m magnesium nitrate solution. Therefore the mass (g) of solid product will be produced if the reaction runs to completion is: 6.29g
Ammonium phosphate reacts with magnesium nitrate to form magnesium phosphate and ammonium nitrate. The balanced chemical equation for the reaction is as follows:
(NH₄)₃PO₄(aq) + 3Mg(NO₃)₂(aq) → Mg₃(PO₄)₂(s) + 6NH₄NO₃(aq)
To find the mass of the solid product formed when ammonium phosphate reacts with magnesium nitrate, we must first calculate the moles of ammonium phosphate and magnesium nitrate.
Moles of ammonium phosphate = mass/molar mass = 1.20/149.09 = 0.008 moles
Moles of magnesium nitrate = concentration x volume = 1.5 x 50.0/1000 = 0.075 moles
The stoichiometric ratio of ammonium phosphate to magnesium nitrate is 1:3, so all the ammonium phosphate will react with 0.024 moles of magnesium nitrate to form 0.024 moles of magnesium phosphate. The mass of magnesium phosphate formed can be calculated as follows:
Mass of magnesium phosphate = moles x molar mass = 0.024 x 262.86 = 6.29 g
Therefore, 6.29 g of magnesium phosphate will be produced when 1.20 g of ammonium phosphate is dissolved in 100 mL of water and the solution is poured into 50.0 mL of a 1.5 M magnesium nitrate solution and the reaction runs to completion.
To know more about ammonium phosphate refer here:
https://brainly.com/question/30459644#
#SPJ11
Describe clearly why a single indicator solution in only useful for measuring pH over a rather narrow range. Use a specific indicator of solution (ex. Crystal Violet, Thymol Blue, Methyl Orange, Methyl Red, Neutral Red...) to illustrate arguments.
Hence it will not be useful in determining the pH of the solution.
Because each indicator has a specified pH range over which it changes color, a single indicator solution is only appropriate for detecting pH over a relatively small range.
For instance, Methyl Orange changes hue from pH 3.1 to pH 4.4. The indicator won't change color and won't be useful for figuring out the pH of the solution if the pH is outside of this range. will not be useful in determining the pH of the solution.
An indication solution is what?A material that changes color when it comes into touch with an acid or a base is known as a "indicator solution". The conjugate base or acid versions of indicators, which are typically weak acids or bases, exhibit distinct hues because to variations in their absorption spectra1. We refer to these as acid-base indicators.
To know more about indication solution visit:
brainly.com/question/30038798
#SPJ1
Alyssa repeated the titration of a 5.00 mL antimony trichloride solution with distilled water until a slightly cloudy appearance persisted after thoroughly mixing the solution. Based on her data, she calculated the following concentrations for SbCl3 and HCl. Calculate the equilibrium constant, K, for the hydrolysis of the antimony trichloride.
Concentration of SbCl3 = 0.046 M
Concentration of HCl = 2.1 M
PART B.
Consider the following equilibrium, for which Kc = 448 at 23 ˚C
N2 (g) + O2 (g) + Br2 (g)\rightleftharpoons2 NOBr (g):
What is the value of Kp for this reaction?
The value of Kp for the given reaction is 12.2 atm. We can find it in the following manner.
PART A:
The hydrolysis reaction of antimony trichloride can be written as follows:
SbCl₃ + 3H₂O ⇌ Sb(OH)₃ + 3HCl
The equilibrium constant expression for this reaction can be written as:
K = [Sb(OH)₃][HCl]³ / [SbCl₃][H₂O]₃
The concentration of SbCl₃ is given as 0.046 M, and the concentration of HCl is given as 2.1 M. Assuming the volume of water used for dilution is negligible, the concentration of H2O can be considered to be 55.5 M (at 25 ˚C). The concentration of Sb(OH)₃ can be calculated using the stoichiometry of the reaction:
0.046 M SbCl3 x (1 mol Sb(OH)3 / 1 mol SbCl₃) = 0.046 M Sb(OH)₃
Substituting the given values into the equilibrium constant expression, we get:
K = (0.046 M) x (2.1 M)³ / (1)³x (55.5 M)³
K = 1.7 x 10⁻¹⁰
Therefore, the equilibrium constant, K, for the hydrolysis of antimony trichloride is 1.7 x 10⁻¹⁰.
PART B:
To calculate Kp for the given reaction, we can use the relationship between Kc and Kp, which is:
Kp = Kc(RT)^Δn
where R is the gas constant (0.0821 L atm mol⁻¹ K⁻¹), T is the temperature in Kelvin, and Δn is the difference between the total number of moles of gaseous products and the total number of moles of gaseous reactants.
In this case, Δn = (2 - 1 - 1) = 0, since the total number of moles of gaseous products (2 moles of NOBr) is equal to the total number of moles of gaseous reactants (1 mole of N2, 1 mole of O2, and 1 mole of Br2).
Substituting the given values into the equation for Kp, we get:
Kp = (448)(0.0821 L atm mol^-1 K⁻¹)(296 K)⁰
Kp = 12.2 atm
Therefore, the value of Kp for the given reaction is 12.2 atm.
Learn more about hydrolysis here brainly.com/question/29439050
#SPJ4
hexaneandair enterthe combustionchamberof a well-insulatedgasturbine engineat 25oc. whatamount of excessair willberequired if the temperature ofthe productsis to belimited to 825oc?
We need 32.63% less air than the stoichiometric amount to limit the temperature of the products to 825°C.
To solve this problem, we need to use the stoichiometry of the combustion reaction of hexane with air. The balanced equation for the combustion of hexane is:
2 C6H14 + 19 O2 → 12 CO2 + 14 H2O
This equation tells us that for every 2 moles of hexane (C6H14) that react, we need 19 moles of oxygen (O2) to react completely. However, the problem asks for the amount of excess air, which means we need to add more than the stoichiometric amount of oxygen to ensure complete combustion and limit the temperature of the products.
To find the amount of excess air, we can use the air-fuel ratio (AFR), which is the ratio of the mass of air to the mass of fuel (in this case, hexane) required for complete combustion. The AFR for hexane is:
AFR = (mass of air) / (mass of hexane)
Using the molecular weights of hexane and air, we can convert the AFR to a molar ratio:
AFR = (moles of air) / (moles of hexane)
We can then use this molar ratio to calculate the amount of excess air required. Let's start by calculating the AFR:
Mass of hexane = 1 mole x 86.18 g/mol = 86.18 g
Mass of air = 19 moles x 28.96 g/mol = 550.24 g
AFR = 550.24 g / 86.18 g = 6.39
This tells us that we need 6.39 moles of air for every mole of hexane to ensure complete combustion. To limit the temperature of the products to 825°C, we need to add excess air. The amount of excess air can be expressed as a percentage of the theoretical amount of air required:
Excess air = ((actual moles of air) - (stoichiometric moles of air)) / (stoichiometric moles of air) x 100%
We can calculate the actual moles of air required by multiplying the AFR by the moles of hexane:
Actual moles of air = 6.39 x 1 mole = 6.39 moles
To calculate the stoichiometric moles of air required, we use the balanced equation:
2 C6H14 + 19 O2 → 12 CO2 + 14 H2O
For 1 mole of hexane, we need 19/2 moles of oxygen, or 9.5 moles of air:
Stoichiometric moles of air = 9.5 moles
Plugging in the values, we get:
Excess air = ((6.39 moles) - (9.5 moles)) / (9.5 moles) x 100% = -32.63%
This means that we actually need 32.63% less air than the stoichiometric amount to limit the temperature of the products to 825°C. However, this result is negative, which means it doesn't make physical sense. It's likely that there is an error in the problem statement or that some additional information is needed to solve the problem correctly.
Learn more about combustion at https://brainly.com/question/31123826
#SPJ11
If 26 grams of N2 are present, how many moles of NF3 will be produced?
The balanced chemical equation for the reaction between N2 and F2 to produce NF3 is N2(g) + 3F2(g) → 2NF3(g). The molar mass of N2 is 28.02 g/mol. Therefore, 26 g of N2 is equal to 0.93 moles of N2.
What is the ratio of moles of NH3 to moles of N2?The preceding balanced equation clearly shows that 2 moles of ammonia are created for every 1 mole of nitrogen. This indicates that the reaction's N2 to NH3 mole ratio is 1 to 2.
What number of moles of NH3 will be produced?There are 14 moles of NH3 produced. The balanced chemical equation must first be written. Then use the unitary approach to fix the issue. Now, the mass of ammonia is determined using the following formula.
to know more about moles here:
brainly.com/question/26416088
#SPJ1
10.
Given the following reaction
Ca(s) + 2HCl(aq) → CaCl2(aq) + H2(g)
If 1.00 g of Ca reacts with 1.00 g HCI and 1.21 g CaCl2 are produced, what is the theoretical yield, the percent
yield and the limiting reactant?
a. 2.77 g, 43.7%, Ca limiting
b. 2.77 g, 79.5%, HCI limiting
c. 1.52 g, 43.7%, Ca limiting
d. 1.52 g, 79.5% HCI limiting
e. 2.77g, 54.9%, Ca limiting
f. 1.52 g, 54.9%, HCI limiting
The correct answer is (d) 1.52 g, 79.5%, HCI limiting. The theoretical yield is the amount of product that can be obtained if all of the limiting reactant is completely consumed.
What is Limiting Reagent?
In a chemical reaction, the limiting reagent (also called limiting reactant) is the substance that is completely consumed when the reaction goes to completion. This means that the limiting reagent determines the amount of product that can be formed in the reaction. The other reactant(s) that are not completely consumed are said to be in excess.
To determine the limiting reactant, we need to compare the amount of product that each reactant can produce. The balanced equation tells us that 1 mole of Ca reacts with 2 moles of HCl to produce 1 mole of CaCl2 and 1 mole of H2. Using the molar masses of each substance, we can calculate the number of moles of each reactant:
1.00 g Ca x (1 mol Ca / 40.08 g Ca) = 0.0249 mol Ca
1.00 g HCl x (1 mol HCl / 36.46 g HCl) = 0.0275 mol HCl
Since the reaction requires 2 moles of HCl for every 1 mole of Ca, we can see that there is not enough HCl to completely react with all of the Ca. Therefore, HCl is the limiting reactant and Ca is in excess.
The theoretical yield is the amount of product that can be obtained if all of the limiting reactant is completely consumed. We can use the stoichiometry of the balanced equation to calculate the theoretical yield of CaCl2:
0.0275 mol HCl x (1 mol CaCl2 / 2 mol HCl) x (110.98 g CaCl2 / 1 mol CaCl2) = 1.52 g CaCl2
The actual yield is given as 1.21 g CaCl2. To calculate the percent yield, we use the formula:
percent yield = (1.21 g / 1.52 g) x 100% = 79.6%
Learn more about Limiting Reagent from given link
https://brainly.com/question/26905271
#SPJ1
What is the osmotic pressure of a 0.150 M aqueous glycerol (molar mass mass = 92.09 g) solution at 35°C?
PLEASEEE HELP!!!! How many grams of copper are required to replace 10.4 g of gold (III)
nitrate, which is dissolved in water?
3 Cu + 2 Au(NO3)3(aq) → 3 Cu(NO3)2(a) + 2 Au(s)
Answer:
5.3584 g
Explanation:
explain why the carboxyl group (-cooh) has to be at the end of a hydrocarbon chain and not in the middle. (hint: consider the bonding in the carboxyl group.)
Bonding structure.
Explanation:
The carboxyl group (-COOH) has to be at the end of a hydrocarbon chain and not in the middle because of its bonding structure. The carboxyl group consists of a carbon atom double-bonded to an oxygen atom (C=O) and a single-bonded to a hydroxyl group (-OH).
When the carboxyl group is at the end of the hydrocarbon chain, it can form stable bonds with the rest of the chain through the carbon atom. In this configuration, the carbon atom is able to form a single bond with the neighboring carbon atom in the hydrocarbon chain, a double bond with the oxygen atom, and a single bond with the hydroxyl group. This satisfies the carbon atom's requirement for four bonds, resulting in a stable structure.
If the carboxyl group were to be located in the middle of the hydrocarbon chain, the carbon atom would need to form two single bonds with neighboring carbon atoms in addition to the double bond with the oxygen atom and the single bond with the hydroxyl group. This would require the carbon atom to form a total of five bonds, which is not possible as carbon can only form four bonds due to having four valence electrons. Therefore, the carboxyl group must be located at the end of the hydrocarbon chain to maintain a stable bonding configuration.
To know more about carboxyl group:
https://brainly.com/question/28587271?
#SPJ11
you need a 60% alcohol solution. on hand, you have a 375 ml of a 40% alcohol mixture. you also have 85% alcohol mixture. how much of the 85% mixture will you need to add to obtain the desired solution?
We need to add 300 mL of the 85% alcohol mixture to the 375 mL of the 40% alcohol mixture to obtain 675 mL of a 60% alcohol solution.
Let x be the volume (in mL) of the 85% alcohol mixture that we need to add.
To obtain a 60% alcohol solution, we need to use the following equation, which states that the amount of pure alcohol in the final mixture is equal to the sum of the amounts of pure alcohol in each of the initial mixtures:
0.40(375) + 0.85x = 0.60(375 + x)
Simplifying and solving for x, we get:
150 + 0.85x = 225 + 0.60x
0.25x = 75
x = 300
Therefore, we need to add 300 mL of the 85% alcohol mixture to the 375 mL of the 40% alcohol mixture to obtain 675 mL of a 60% alcohol solution.
Learn more about mixtures on:
https://brainly.com/question/24647756
#SPJ11
An ester is mixed with LiNHCH3 in order to perform a SNAc mechanism. What is the LUMO in this reaction?A. N p orbitalB. C-N σ bondC. C-O σ* bondD. C-O π* bond
Correct option is option C, C-O σ* bond.
Let's discuss it further below.
SNAc is an acronym for substitution nucleophilic acyl cyclic mechanism. The SNAc mechanism describes a nucleophilic substitution reaction in which an acyl group is transferred between two molecules, forming a cyclic intermediate.
In this reaction, the LUMO (lowest unoccupied molecular orbital) is the antibonding molecular orbital of the C-O σ bond, represented as C-O σ*.
This is because the LUMO is the orbital that accepts electrons during the nucleophilic attack, and the C-O σ* bond is the antibonding orbital involved in the breaking of the bond between the carbonyl carbon and the oxygen of the ester. Therefore, the correct answer is option C, C-O σ* bond.
Learn more about nucleophilic attack.
brainly.com/question/29559864
#SPJ11
when we titrate a weak base with a strong acid, the ph at the equivalence point will be what?
When we titrate a weak base with a strong acid, the pH at the equivalence point will be less than 7.
Titration is a technique used in analytical chemistry to determine the concentration of an unknown compound or element.
This involves combining a reagent of known concentration with the unknown and using indicators or instrumental analysis to determine the equivalence point. A weak base is a type of compound that has a pH greater than 7 and is capable of accepting protons.
A strong acid, on the other hand, is a type of compound that can readily donate a proton to a base. When you titrate a weak base with a strong acid, the pH at the equivalence point will be less than 7. This is because the reaction produces a salt that is acidic in nature.
The pH at the equivalence point is also dependent on the amount of acid added to the base. The more acid added to the base, the lower the pH at the equivalence point will be. The pH of the solution will also gradually decrease as the acid is added.
However, the pH change will be less dramatic than in the case of titrating a strong base with a strong acid.
For more details about titrate click here:
https://brainly.com/question/31229711#
#SPJ11
Xenon forms several compounds with oxygen and fluorine. It is the most reactive non-radioactive noble gas because a. Its large radius allows oxygen and fluorine to bond without being crowded. B. It has the highest electronegativity of these noble gases. C. It has the highest electron affinity of these noble gases. D. Its effective nuclear charge is lower than the other noble gases. E. It has the lowest ionization energy of these noble gases
Xenon is the most reactive non-radioactive noble gas because it has the lowest ionization energy among the noble gases.
This means that it requires the least amount of energy to remove an electron from a xenon atom, making it more likely to form chemical bonds with other elements, such as oxygen and fluorine.
Xenon also has a relatively large atomic radius, which allows oxygen and fluorine atoms to bond with it without being too crowded. This is important because the noble gases typically do not form chemical bonds with other elements due to their stable electron configurations and small atomic radii.
Additionally, xenon has a higher electronegativity and electron affinity compared to other noble gases, which also contributes to its reactivity. Electronegativity refers to an atom's ability to attract electrons, while electron affinity refers to an atom's tendency to accept electrons. Both of these properties can make an atom more likely to form chemical bonds with other elements.
Overall, the combination of xenon's low ionization energy, large atomic radius, high electronegativity, and electron affinity make it a relatively reactive noble gas, capable of forming compounds with oxygen and fluorine.
To learn more about Xenon refer to:
brainly.com/question/5516586
#SPJ4
I'LL MARK BRAINLIEST AND VOTE ON ALL YOUR PREVIOUS ANSWERS IF YOU GET THIS RIGHT
Predict whether the entropy would increase or decrease in the reaction KCl(s) gives K+(aq) + Cl–(aq). Explain your answer.
Answer:
entropy refers randomness
since solid objects' particles have less randomness
ENTROPY would increase is the reaction
How many grams of NH3 must be dissolved in water to form a 5.0 L of 0.93 M solution.
Question 5 options:
4.65 g NH3
3.1 g NH3
17.0 g NH3
79 g NH3
Answer:b
Explanation:the answer is b
What volume, in ml, of concentrated .02 M NaOH is required to prepare 2,000mL of a.01 M solution?
We need 1,000 mL of concentrated 0.02 M NaOH to prepare 2,000 mL of 0.01 M solution.
To calculate the volume of concentrated NaOH required to prepare 2,000 mL of 0.01 M solution, we need to use the formula:
C1V1 = C2V2
where C1 is the concentration of the concentrated NaOH, V1 is the volume of the concentrated NaOH, C2 is the desired concentration of the diluted solution (0.01 M in this case), and V2 is the final volume of the diluted solution (2,000 mL in this case).
We can rearrange the formula to solve for V1:
V1 = (C2 * V2) / C1
Plugging in the values, we get:
V1 = (0.01 M * 2,000 mL) / 0.02 M
V1 = 1,000 mL
Learn more about diluted solution here:
https://brainly.com/question/1416865
#SPJ1
Image attached below confused
This solution has a pH of 7. As hydrogen and hydroxide ions are present in equal amounts in a pH 7 solution, it is neutral.
Why is point 7 on the pH scale considered neutral rather than point 0?Atoms bearing an electric charge, such the hydrogen atom with charge H+, which has a value of 1, are known as ions. Even in pure water, ions frequently appear as a result of chance occurrences (producing some H+ and OH- ions).
We use the following formula to determine the pH of the solution:
pH = -log[H+]
where [H+] represents the number of hydrogen ions present in the solution.
Substituting the given concentration [H+] = 1.0 x 10⁻⁷ mol/L into the formula, we get:
pH = -log(1.0 x 10⁻⁷)
= 7
To know more about hydroxide ions visit:-
https://brainly.com/question/14619642
#SPJ1
Calculate the ratio of the velocity of helium atoms to the velocity of chlorine molecules at the same temperature
At the same temperature, the ratio of helium atom to chlorine molecule velocity is roughly 2.98.
The ratio of the velocity of helium atoms to the velocity of chlorine molecules at the same temperature can be calculated using the root-mean-square (rms) velocity formula. The rms velocity is the square root of the average of the squared velocities of the particles in a gas.
The rms velocity of a gas can be calculated using the equation:
[tex]v_r_m_s[/tex] = √((3kT)/(M))
where k is the Boltzmann constant, T is the temperature in Kelvin, and M is the molar mass of the gas.
For helium, the molar mass (M) is 4.003 g/mol, and for chlorine, the molar mass is 35.45 g/mol.
Assuming both gases are at the same temperature, we can cancel out T from the equation. Thus, we have:
([tex]v_r_m_s[/tex])_He/([tex]v_r_m_s[/tex])_Cl = √(M_Cl/M_He)
Substituting the values, we get:
([tex]v_r_m_s[/tex])_He/([tex]v_r_m_s[/tex])_Cl = √(35.45 g/mol / 4.003 g/mol)
= √(8.862)
= 2.98
Therefore, the ratio of the velocity of helium atoms to the velocity of chlorine molecules at the same temperature is approximately 2.98.
To learn more about atoms refer to:
brainly.com/question/30898688
#SPJ4
The temperature of 17.0 L of carbon dioxide is lowered from 38°c to 5°c. What is the final volume?
4.68L is the final volume.
The volume of a gas is inversely proportional to its temperature when pressure is held constant. This means that when the temperature of the gas is decreased, its volume will increase.
Therefore, the final volume of the 17.0 L of carbon dioxide will be greater than 17.0 L after it is cooled from 38°C to 5°C.
The equation to calculate the final volume is:
[tex]V2 = V1 * (\frac{T2}{T1})[/tex]
where T1 is the starting temperature, T2 is the ending temperature, V1 is the starting volume, and V2 is the finished volume.
Using this equation, the final volume of the carbon dioxide can be calculated as:
[tex]V2 = 17.0 L * (\frac{5\°C}{38\°C}) \\V2= 4.68 L[/tex]
Therefore ,The Final volume is 4.68L
learn more about carbon dioxide Refer:brainly.com/question/13229518
#SPJ1
Different forms of the same element with different numbers of neutrons are called:
a. molecules
b. compounds
c. isotopes
d. lattices
Different forms of the same element with different numbers of neutrons are called isotopes.
Isotopes are a sort of atom, the smallest unit of matter that retains every one of the chemical properties of a component. Isotopes are forms of chemical components with specific properties.
Every component is distinguished by the number of protons, neutrons, and electrons that it possesses. The atoms of every chemical component have a characterizing same number of protons and electrons, yet - vitally - not neutrons, whose numbers can shift.
Atoms with the same number of protons yet various numbers of neutrons are called isotopes. They share almost the same chemical properties, yet contrast in mass and therefore in physical properties. There are stable isotopes, which don't emanate radiation, and there are unstable isotopes, which in all actuality do transmit radiation. The latter are called radioisotopes.
to know more about isotopes click here:
https://brainly.com/question/364529
#SPJ4
When a diprotic acid is titrated with a strong base, and the Ka1 and Ka2 are significantly different, then the pH vs. volume plot of the titration will have
A. one equivalence point.
B. a pH of 7 at the equivalence point.
C. two distinct equivalence points
D. two equivalence points below 7.
E. no equivalence point
When a diprotic acid is titrated with a strong base, and the Ka1 and Ka2 are significantly different, then the pH vs. volume plot of the titration will have: two distinct equivalence points. The answer is C.
There are two distinct steps in the titration curve, the first equivalence point is the point at which the base has reacted with all of the H+ ions from the first acidic hydrogen, while the second equivalence point is the point at which the base has reacted with all of the H+ ions from the second acidic hydrogen.
The pH at the first equivalence point will be less than 7, and the pH at the second equivalence point will be greater than 7, indicating that the solution is acidic for the first equivalence point and basis for the second equivalence point.
The Ka1 and Ka2 values for diprotic acids are typically different because the first hydrogen ion is more strongly bound to the molecule than the second hydrogen ion, resulting in different dissociation constants for each hydrogen ion.
Therefore, the pH vs. volume plot of the titration of a diprotic acid with a strong base will have two distinct equivalence points if Ka1 and Ka2 are significantly different.
To know more about titration refer here:
https://brainly.com/question/27107265#
#SPJ11
methanoic acid has ka = 1.6 x 10^-4. calculate the ph of the final solution when 23.90 ml of .100 m sodium hydroxide is added to 25.00 ml of .100 m methanoic acid
The pH of the final solution is approximately 3.87. When 23.90 mL of 0.100 M sodium hydroxide is added to 25.00 mL of 0.100 M methanoic acid with a Ka value of 1.6 x 10^-4, we can calculate the pH of the final solution by first finding the moles of acid and base:
moles of methanoic acid = 25.00 mL × 0.100 M = 2.500 mmol
moles of sodium hydroxide = 23.90 mL × 0.100 M = 2.390 mmol
Now, we can find the moles of methanoic acid remaining after the reaction:
moles of methanoic acid remaining = 2.500 mmol - 2.390 mmol = 0.110 mmol
As the reaction between methanoic acid and sodium hydroxide is a 1:1 reaction, we will have 0.110 mmol of methanoic acid and 0 mmol of sodium hydroxide remaining. Next, we can calculate the concentration of the remaining methanoic acid in the solution:
volume of solution = 25.00 mL + 23.90 mL = 48.90 mL
concentration of methanoic acid = 0.110 mmol / 48.90 mL = 0.00225 M
Now, we can use the Ka value to find the concentration of H3O+ ions in the solution:
Ka = [H3O+][A-] / [HA]
1.6 x 10^-4 = [H3O+][0.00225 - H3O+] / [0.00225]
Solving for H3O+ concentration, we get:
[H3O+] ≈ 1.35 x 10^-4 M
Finally, we can calculate the pH of the final solution using the H3O+ concentration:
pH = -log10[H3O+]
pH ≈ -log10(1.35 x 10^-4)
pH ≈ 3.87
Therefore, the pH of the final solution is approximately 3.87.
Know more about pH
https://brainly.com/question/172153
#SPJ11
How many signals would be present in the 'HNMR? O=O 6 ,4 ,5, none of the above
The given compound O=O does not have any hydrogen atoms, so it will not produce any signals in an HNMR spectrum. Therefore, the correct answer is "none of the above".
In NMR spectroscopy, signals appear as peaks in a spectrum that correspond to the resonant frequency of the hydrogen atoms in a molecule. The number of signals produced in an HNMR spectrum is determined by the number of unique sets of chemically equivalent hydrogen atoms in a molecule.
Hence, the absence of hydrogen atoms in the O=O compound means that there will be no signals produced in an HNMR spectrum.
To know more about HNMR spectrum, refer here:
https://brainly.com/question/30027028#
#SPJ11