Evaporation of sweat requires energy and thus take excess heat away from the body. Some of the water that you drink may eventually be converted into sweat and evaporate. If you drink a 20.0-ounce bottle of water that had been in the refrigerator at 3.8 °C, how much heat is needed to convert all of that water into sweat , knowing 1ml contains 0.03 ounces? (Note: Your body temperature is 36.6 °C. For the purpose of solving this problem, assume that the thermal properties of sweat are the same as for water.)

Answers

Answer 1

Answer:

The amount of heat required is [tex]H_t = 1.37 *10^{6} \ J [/tex]

Explanation:

From the question we are told that

The mass of water is [tex]m_w = 20 \ ounce = 20 * 28.3495 = 5.7 *10^2 g[/tex]

The temperature of the water before drinking is [tex]T_w = 3.8 ^oC[/tex]

The temperature of the body is [tex]T_b = 36.6^oC[/tex]

Generally the amount of heat required to move the water from its former temperature to the body temperature is

[tex]H= m_w * c_w * \Delta T[/tex]

Here [tex]c_w [/tex] is the specific heat of water with value [tex]c_w = 4.18 J/g^oC [/tex]

So

[tex]H= 5.7 *10^2 * 4.18 * (36.6 - 3.8)[/tex]

=> [tex]H= 7.8 *10^{4} \ J [/tex]

Generally the no of mole of sweat present mass of water is

[tex]n = \frac{m_w}{Z_s}[/tex]

Here [tex]Z_w[/tex] is the molar mass of sweat with value

[tex]Z_w = 18.015 g/mol[/tex]

=> [tex]n = \frac{5.7 *10^2}{18.015}[/tex]

=> [tex]n = 31.6 \ moles [/tex]

Generally the heat required to vaporize the number of moles of the sweat is mathematically represented as

[tex]H_v = n * L_v[/tex]

Here [tex]L_v[/tex] is the latent heat of vaporization with value [tex]L_v = 7 *10^{3} J/mol[/tex]

=> [tex]H_v = 31.6 * 7 *10^{3} [/tex]

=> [tex]H_v = 1.29 *10^{6} \ J [/tex]

Generally the overall amount of heat energy required is

[tex]H_t = H + H_v[/tex]

=> [tex]H_t = 7.8 *10^{4} + 1.29 *10^{6}[/tex]

=> [tex]H_t = 1.37 *10^{6} \ J [/tex]


Related Questions

An airplane flies with a constant speed of 540 miles per hour. How far can it travel in 1 1/4 hours?

Answers

Answer:

Hey!

Your answer is 675 MILES!

Explanation:

Using the S = D x T formula...

We first need to convert any values... 1 1/4 hours--75 mins (1.25hrs)

So now we substitute into the formula!

D (distance)= 540 x 1.25 = 675     (Distance = Speed x Time)

Distance Travelled= 675 MILES!

I HOPE THIS HELPED YOU!

25° 20' 42" S 131° 2' E
1. What is the place?

Answers

That place is the "Uluru- Kara That National Park"

A block of mass 12.2 kg is sliding at an initial velocity of 6.65 m/s in the positive x-direction. The surface has a coefficient of kinetic friction of 0.253. (Indicate the direction with the signs of your answers.)
a.) What is the force of kinetic friction (in N) acting on the block?
(b What is the block's acceleration (in m/s2)?

(c) How far will it slide (in m) before coming to rest?

Answers

Explanation:

Given that,

Mass of the block, m = 12.2 kg

Initial velocity of the block, u = 6.65 m/s

The coefficient of kinetic friction, [tex]\mu_k=0.253[/tex]

(a)The force of kinetic friction is given by :

[tex]f=\mu_k mg[/tex]

mg is the normal force

So,

[tex]f=0.253\times 12.2\times 9.8\\\\f=30.24\ N[/tex]

(b) Net force acting on the block in the horizontal direction,

f = ma

a is the acceleration of the block

[tex]a=\dfrac{f}{m}\\\\a=\dfrac{30.24}{12.2}\\\\a=2.47\ m/s^2[/tex]

(c) Let d is the distance covered by the block before coming to the rest. Using third equation of motion as follows :

[tex]v^2-u^2=2ad\\\\d=\dfrac{v^2-u^2}{2a}\\\\d=\dfrac{-(6.65)^2}{2\times 2.47}\\\\d=-8.95\ m[/tex]

Hence, this is the required solution.

This question involves the concepts of the frictional force, Newton's second law of motion, and the equations of motion.

a) The force of kinetic friction acting on the block is "-30.28 N".

b) The acceleration of the block is "-2.48 m/s²".

c) The block will slide "8.9 m" before coming to rest.

a)

The kinetic friction force is given by the following formula:

[tex]F=\mu_k mg[/tex]

where,

F = frictional force = ?

[tex]\mu_k[/tex] = coefficient of kinetic friction = 0.253

m = mass of block = 12.2 kg

g = acceleration dueto gravity = 9.81 m/s²

Therefore,

[tex]F=(0.253)(12.2\ kg)(9.81\ m/s^2)[/tex]

F = - 30.28 N (negative sign due to resistive force)

b)

According to Newton's Second Law of Motion:

F = ma

[tex]a=\frac{F}{m} = \frac{-30.28\ N}{12.2\ kg}\\\\[/tex]

a = -2.48 m/s² (negative sign due to deceleration)

c)

Using the third equation of motion to calculate the distance:

[tex]2as=v_f^2-v_i^2[/tex]

where,

s = distance = ?

vf = final speed = 0 m/s

vi = initial speed = 6.65 m/s

Therefore,

[tex]2(-2.48\ m/s^2)s=(0\ m/s)^2-(6.65\ m/s)^2\\\\s=\frac{-(6.65\ m/s)^2}{2(-2.48\ m/s^2)}[/tex]

s = 8.9 m

Learn more about Newton's Second Law of Motion here:

brainly.com/question/13447525?referrer=searchResults

The attached picture shows Newton's Second Law of Motion.

If dx denotes the change in position of an object and dt denotes the corresponding time interval, then instantaneous velocity is given by:

Answers

Answer:

[tex]Velocity=\frac{dx}{dt}[/tex]

Explanation:

Remember that instantaneous velocity is just a measure to know the velocity that any object has at any point given in time, so we just need to know the distance it has travel, which would be the change in position, and the time it took that change in position to occurr, this means distance by time, so we just divide dx by dt and we have the solution for instantaneous velocity.

If a change in position as denoted by [tex]dx[/tex] and [tex]dt[/tex] change in time, the instantaneous velocity will be given by,

[tex]v = \dfrac {dx}{dt}[/tex]

What is Velocity?It can be defined by the change in position of the object over time. This is a vector quantity. Vector quantity is a quantity that has both magnitude and direction.

Instantaneous velocity:The velocity of the object at a point of time is known as instantaneous velocity. Instantaneous velocity can be calculated by the ratio of change in position to the elapsed point of time.

[tex]v = \dfrac {dx}{dt}[/tex]

Where,

[tex]v[/tex] - instantaneous velocity

[tex]dt[/tex]   - change in distance (position)

[tex]dt[/tex]- change in time

Therefore, if a change in position as denoted by [tex]dx[/tex] and [tex]dt[/tex]change in time, the instantaneous velocity will be given by,

[tex]v = \dfrac {dx}{dt}[/tex]

Learn more about  Instantaneous velocity.

https://brainly.com/question/13372043

What is the product of 0.0322 cm x 6.5 cm rounded to the correct number of significant figures?

Answers

Answer:

2.093 × 10⁻³ cm²

Explanation:

Given:

0.0322 cm × 6.5 cm

Find:

Product

Computation:

⇒ 0.0322 cm × 6.5 cm

⇒ 0.2093 cm²

2.093 × 10⁻³ cm²

1
A truck increases its speed from 15 m/s to 60 m/s in 15 s. Its acceleration is

Answers

Acceleration = (Vf - Vi)/t
Since Vf= 60m/s
Vi= 15m/s
T= 15s
=> a= (60m/s - 15m/s)/15s
= 3
So the acceleration is 3m/s^2

Temperature is a measure of

Answers

Answer:

The average kinetic energy

The amount of heat a substance has or the average kinetic energy of particles in a substance

4. A tankful of liquid has a volume
of 0.2m3. What is the volume in (a)
lities (b) cm3 (c)ml​

Answers

Explanation:

sjaaqqjajkslxxjxn vbnvisowpsjsndncnmcnvngieoowpwisnxxnnccnnckfkdkdjcncjcmdmcmcmdmcmdmdmcmcmcdjqowieurisosksjsjsosoapqpskdj

A 20-kg bicycle carrying a 50-kg girl is traveling with a kinetic energy of 2,290 J.
What is the velocity of the girl and bicycle?
8 m/s
16 m/s
64 m/s
4 m/s

Answers

Answer:

64 m/s

Explanation:

64m/s is the answer of question

64/m/s the answer

please help me with this physics problem​

Answers

Answer:

It says the answer. (5 marks.)

Explanation:

The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. A single lap should be completed each time you hear this sound. Remember to run in a straight line, and run as long as possible.

A compass needle moves when it is near a wire with electric current. which of the following explains this phenomenon?

Answers

Answer:

D

Explanation:

Your chosen answer is correct .

Hope this helps :)

The electric current creates a magnetic field that explains this phenomenon. So, the correct option is D.

What is Magnetic field?

A magnetic field is defined as the vector field that describes the magnetic effect on electric charges, electric currents and magnetic materials where a charge moving in a magnetic field experiences a force perpendicular to its velocity and magnetic field.

The magnetic field is explained as the region around a magnet that has a magnetic force where all magnets have north and south poles. Opposite poles attract each other, while like poles repel each other. The electric current creates a magnetic field that explains a compass needle moves when it is near a wire with electric current phenomenon.  

Therefore, the correct option is D.

Learn more about Magnetic field, here:

https://brainly.com/question/14848188

#SPJ6


Change in Energy Quick Check
1 of 5
Which change occurs as an object falls toward the surface of Earth? (1 point)
The force of gravity on the object decreases.
The potential energy of the object decreases.
The acceleration due to gravity decreases.
The kinetic energy of the object decreases
IF SOMEONE GETS THE ANSWERS TO 1-5 of quick check pls post them here

Answers

Answer:

The force of gravity on the object decreases.  (FALSE)

The potential energy of the object decreases.  (TRUE)

The acceleration due to gravity decreases.  (FALSE)

The kinetic energy of the object decrease (FALSE)

Explanation:

FORCE OF GRAVITY:

Force of gravity on the object is the weight of object, which depends upon the mass and value of acceleration due to gravity (W = mg). Since, the value mass is constant on Earth and acceleration due to gravity is also constant on earth.

Therefore, force of gravity remains same on the object. The statement is false.

POTENTIAL ENERGY:

Potential energy of object depends upon the mass, value of acceleration due to gravity, and change in height of object (P.E = mgΔh). Since, the value mass is constant on Earth and acceleration due to gravity increases as the object moves towards the surface of earth. But, the height of object is decreasing.

Therefore, potential energy of object decreases. The statement is true.

ACCELERATION DUE TO GRAVITY:

Acceleration due to gravity depends upon the altitude (gh = g[1 - 2h/Re]). Since, the height of object is decreasing.

Therefore, acceleration due to gravity increases. The statement is false.

But, this change is not significant.

KINETIC ENERGY:

Kinetic Energy of object, which depends upon the mass and velocity of the object (K.E = mv²/2). Since, the value mass is constant on Earth and velocity increases as the object moves towards the surface of earth.

Therefore, kinetic energy of the object also increases. The statement is false.

As the object falls towards the surface of the earth, the potential energy of the object decreases.

The earth is a large gravitational field. The potential energy of an object is dependent on its height. As a body falls through a height, its mass remains constant but its height decreases therefore its potential energy decreases also.

Hence, the true statement is that as the object falls towards the surface of the earth, the potential energy of the object decreases.

Learn more: https://brainly.com/question/21288807

3 Points
The half-value layer for lead for g rays from 60Co is 12.8 mm. An electrometer gave a count rate of 35 pulses per second when at a
certain distance from a source, with no lead between source and detector. If 6 mm of lead were then inserted between source and
detector, the count rate (in pulses per second) would be nearest to:
A. 16
OB. 8
OC. 20
D. 25
OE. 75

Answers

Answer:

  D.  25

Explanation:

The number of pulses per second (p) for x mm of lead can be modeled by the exponential equation ...

  p = 35(0.5^(x/12.8))

Then for x=6, the value of p is ...

  p = 35·0.5^(6/12.8) ≈ 25.29

The expected count rate would be nearest 25 pps.

What type of climate would be near cold ocean currents? PLEASE HELP QUICK!!

Answers

Answer:

hot humid with lots of rain.

Explanation:

ocean currents act as conveyer belts of warm and cold water sending heat to the polar regions and helping the tropical areas cool off, thus influencing both weather and climate. the tropics are particularly rainy because heat absorption , and thus ocean evaporation, is highest.

Mild with cooler weather than similar latitudes type of climate would be near cold ocean currents.

What is cold ocean currents?

On the eastern side of ocean basins, lower latitudes or the tropics are where cold currents migrate in a direction toward the equator. They carry cold water into regions of the continent that have warm water, which are usually found on the west coastlines.

The Labrador Ocean Current and East Greenland Current flows are two noteworthy examples of cold currents.

From the perspectives of ecology and climate, ocean currents are also advantageous. For example, they are responsible for changing global temperatures.

Learn more about cold ocean currents here:

https://brainly.com/question/377571

#SPJ2

______ is a disease in which the body does not produce or probory use inslin

Answers

Answer:

Diabetes

Explanation:

Insulin is an important hormone that helps the body convert sugar, starches, and other foods into energy.

Researchers have measured the acceleration of racing greyhounds as a function of their speed; a simplified version of their results is shown in (Figure 1). The acceleration at low speeds is constant and is limited by the fact that any greater acceleration would result in the dog pitching forward because of the force acting on its hind legs during its power stroke. At higher speeds, the dog's acceleration is limited by the maximum power its muscles can provide.

How far does the dog run until its speed reaches 4.0 m/s?

Answers

[tex]\Huge\boxed{\boxed{\dfrac{4}{5}\ \text{meters}}}[/tex]

Let's start by finding the time it takes for the dog to reach a velocity of [tex]4[/tex] m/s.

We can use the following equation, where [tex]v_i[/tex] is initial velocity, [tex]v_f[/tex] is final velocity, [tex]t[/tex] is time, and [tex]a[/tex] is acceleration.

[tex]v_f-v_i=at[/tex]

We're trying to solve for [tex]t[/tex] first, so divide both sides by [tex]a[/tex].

[tex]\dfrac{v_f-v_i}{a}=t[/tex]

Substitute in the known values.

[tex]\dfrac{4-0}{10}=t[/tex]

[tex]\dfrac{4}{10}=t[/tex]

[tex]\dfrac{2}{5}=t[/tex]

Now, we can use the following formula to find the distance.

[tex]s=v_it+\dfrac{1}{2}at^2[/tex]

Substitute in the known values.

[tex]s=0*\dfrac{2}{5}+\dfrac{1}{2}*10*(\frac{2}{5})^2[/tex]

Anything multiplied by [tex]0[/tex] is

[tex]s=\dfrac{1}{2}*10*(\frac{2}{5})^2[/tex]

Just simplify from there.

[tex]s=\dfrac{1}{2}*10*\dfrac{4}{25}[/tex]

[tex]s=5*\dfrac{4}{25}[/tex]

[tex]s=\dfrac{20}{25}[/tex]

[tex]s=\boxed{\dfrac{4}{5}}[/tex]

Hey there!

The hind legs of the dog create it to accelerate.

We know the mass of the dog is 36km (m).

We know that the acceleration of the dog it 10m/s² (a).

Find the average force with the formula [ f = ma ] where m = mass and a = acceleration.

f = 36*10

f = 360 newtons

We don't know the traveled distance but we do know that the starting speed of the dog was 0m/s and the ending speed was 4m/s.

We can use the formula [ vf² = vo² + 2ad ] where vf = final speed, vo = starting speed, a = acceleration, and d = distance.

We know all the variables except the distance, so we are going to solve for d.

(4)² = (0)² + 2(10)(d)

16 = 0 + 20d

16 = 20d

16/20 = 20d/20

0.8 = d

Therefore, the dog runs 0.8 meters until it reaches 4m/s.

Best of Luck!

PLZ EXPLAIN AND I WILL GIVE YOU BRANILEST

How do two interacting objects exert equal and opposite forces on each other when they collide, even though they have different masses?

Answers

Answer:

Did a little research.

Explanation:

The Law of Action-Reaction:

Newton's third law of motion is naturally applied to collisions between two objects. In a collision between two objects, both objects experience forces that are equal in magnitude and opposite in direction. Such forces often cause one object to speed up (gain momentum) and the other object to slow down (lose momentum). According to Newton's third law, the forces on the two objects are equal in magnitude. While the forces are equal in magnitude and opposite in direction, the accelerations of the objects are not necessarily equal in magnitude. In accord with Newton's second law of motion, the acceleration of an object is dependent upon both force and mass. Thus, if the colliding objects have unequal mass, they will have unequal accelerations as a result of the contact force that results during the collision.Consider the collision between the club head and the golf ball in the sport of golf. When the club head of a moving golf club collides with a golf ball at rest upon a tee, the force experienced by the club head is equal to the force experienced by the golf ball. Most observers of this collision have difficulty with this concept because they perceive the high speed given to the ball as the result of the collision. They are not observing unequal forces upon the ball and club head, but rather unequal accelerations. Both club head and ball experience equal forces, yet the ball experiences a greater acceleration due to its smaller mass. In a collision, there is a force on both objects that causes an acceleration of both objects. The forces are equal in magnitude and opposite in direction, yet the least massive object receives the greatest acceleration.

Consider the collision between a moving seven ball and an eight ball that is at rest in the sport of table pool. When the seven ball collides with the eight ball, each ball experiences an equal force directed in opposite directions. The rightward moving seven ball experiences a leftward force that causes it to slow down; the eight ball experiences a rightward force that causes it to speed up. Since the two balls have equal masses, they will also experience equal accelerations. In a collision, there is a force on both objects that causes an acceleration of both objects; the forces are equal in magnitude and opposite in direction. For collisions between equal-mass objects, each object experiences the same acceleration.

why bananas are curved

Answers

Because they built:different

they are bananas and bananas are curved because they grow curved

If a bird applies a 5 N upward force on a branch to lift the branch of ground to a
height of 24 m, how much work did the bird do?

Answers

Work equals Force times Distance. 5*24= 120


3 A stationary car accelerates uniformly
for 20 s. Its velocity reaches 80
km h-1. What is the acceleration of the
car during this period?-

A 1.11 ms-2
B 2.22 ms-2
C 4.00ms-2
D 22.2ms-2​

Answers

22.2ms-2 because it jsut is

What is magnetic poles always come in pair

Answers

Like poles repel and unlike poles attract. Magnetic poles always occur in pairs of north and south—it is not possible to isolate north and south poles.
because it just does my guy

NEED HELP DUE AT 11:59!! A ball is thrown horizontally from the top of
a building 130 m high. The ball strikes the
ground 53 m horizontally from the point of
release.
What is the speed of the ball just before it
strikes the ground?
Answer in units of m/s.

Answers

Answer:

Since the ball was thrown horizontally, there was no vertical component in that force. and hence, the initial vertical velocity of the ball is 0 m/s and the initial horizontal velocity is r.

We are given:

initial velocity  (u) = 0 m/s     [vertical]

final velocity (v) = v m/s  [vertical]

time taken to reach the ground (t) = t seconds

acceleration (a) = 10 m/s/s   [vertical , due to gravity]

height from the ground (h) = 130 m

displacement (s) = 53 m [horizontal]

Solving for time taken:

From the third equation of motion:

s = ut + 1/2 at²

130 = (0)(t) + 1/2 * (10) * t²

130 = 5t²

t² = 26

t = √26 seconds  or   5.1 seconds

Final Horizontal velocity of the ball

Since the horizontal velocity of the ball will remain constant:

the ball covered 53 m in 5.1 seconds [horizontally]

horizontal velocity of the ball = horizontal distance covered / time taken

Velocity of the ball = 53 / 5.1

Velocity of the ball = 10.4 m/s

Answer:

51.51519 m/s

Explanation:

Given: [tex]a_{x} =0[/tex] [tex]a_{y} -g[/tex] [tex]v_{yo} =0[/tex] [tex]x_{o} =0[/tex] [tex]x=53[/tex][tex]y_{o} =130[/tex]

X-direction                           | Y-direction

[tex]x=x_{o} +v_{xo}t[/tex]                         | [tex]y=y_{o} +v_{yo}t+\frac{1}{2}a_{y}t^2[/tex]

[tex]53=0v_{xo}(5.15078)[/tex]                 | [tex]0=130+\frac{1}{2}(-9.8)t^2[/tex]

[tex]53=v_{xo} (5.15078)[/tex]                    | [tex]-130=-4.9t^2[/tex]

[tex]\frac{53}{5.15078} =v_{xo}[/tex]                             |  [tex]\sqrt{\frac{-130}{-4.9} }=\sqrt{t^2}[/tex]

[tex]10.2897=v_{xo}[/tex]                            | [tex]5.15078=t[/tex]

[tex]v=\sqrt{v_{y}^2+ v_{x}^2}[/tex]                            | [tex]v_{y}^2 =v_{yo}+2a_{y} d[/tex]

[tex]v=\sqrt{(50.27771)^2+(10.2897)^2}[/tex] | [tex]\sqrt{v_{y}^2} =\sqrt{2(-9.8)(0-130)}[/tex]

[tex]v=51.51519 m/s[/tex]                        | [tex]v_{y}=50.47771[/tex]

How many sets of planets would you need to create the mass of the Sun?

Answers

Answer:

volume about 1.3 million Earths could fit inside the Sun the mass of the Sun is 1.989 X 10 to the 30 kg about 333000 times the mass of the Earth

Explanation:

step-by-step explanation hope this answer your question

write .00000023 in scientific notation

Answers

Answer: 2.3 x 10^-7

Explanation:

When you move the decimal to the right, you decrease the exponent. So lets count how many spots you have to move the decimal spot to get an answer between 1 and 10. I counted seven spots.

So:

[tex]2.3 *10^-^7[/tex]

2.3 * 10 °−7

The degree indicates that the number is that small thing that floats above

what are the answers to the question

Answers

Answer: the link isnt loading

please help me. i have 2 hours

Answers

the missing word is clockwise moment. I hope this helps good luck

A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800 kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the force that must be applied to the smaller piston in order to lift the car after it has been raised 1.20 m

Answers

Answer:

The answer is below

Explanation:

Pascal's law states that pressure is exerted in all parts of a static fluid equally.

The area of the narrower arm with a radius of 0.05 m (5 cm) is given as:

Area of narrow arm = π(0.05)²

The area of the wider arm with a radius of 0.18 m (18 cm) is given as:

Area of narrow arm = π(0.18)²

The ratio if the wider arm area to the narrow arm area = π(0.18)² / π(0.05)² = 12.96

To move the 12000 N car, the amount of force needed = 12000/12.96 = 926 N

list of energy changes when hydroelectricity city is made​

Answers

Answer:

A turbine and generator produce the electricity

Explanation:

"A hydraulic turbine converts the energy of flowing water into mechanical energy. A hydroelectric generator converts this mechanical energy into electricity.

You have purchased an inexpensive USB oscilloscope (which measures and displays voltage waveforms). You wish to determine if the oscilloscope has an error bias; in other words, you wish to determine if the errors made by the oscilloscope have a population mean that is not equal to zero. So you use a very accurate voltmeter to find the measurement errors for 13 different measurements made by your USB oscilloscope. A data file containing these measurements is HTMean1.csvPreview the document . Do a statistical analysis on this data to determine if the oscilloscope has an error bias.

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

1

  A

2

A

Explanation:

From the question the data given for Error (mV) is -15

-15.17

8.67

-13.74

-20.69

-6.96

-1.36

-2.96

-9.26

3.11

-14.12

6.39

-14.77

Generally

The null hypothesis is [tex]H_o : \mu = 0[/tex]

The alternative hypothesis is [tex]H_a : \mu \ne 0[/tex]

The sample size is n = 13

Here [tex]\mu[/tex] represents the true error bias (i.e population error bias)

Generally the sample error bias is mathematically represented as

[tex]\= x = \frac{ \sum x_i}{n}[/tex]

=> [tex]\= x = \frac{ -15.17 + 8.67 + (-13.74) + \cdots + (-14.77) }{13}[/tex]

[tex]\= x = -7.37[/tex]

Generally the standard deviation is mathematically represented as

[tex]\sigma = \sqrt{\frac{\sum (x_i - \= x )^2}{n} }[/tex]

=> [tex]\sigma = \sqrt{\frac{ (-15.17-( -7.37) )^2 + (8.67 -( -7.37) )^2 + \cdots + (-14.77 -( -7.37) )^2 }{13} }[/tex]

=> [tex]\sigma = \sqrt{ 119.385}[/tex]

=> [tex]\sigma = 10.926[/tex]

Generally the test statistics is mathematically represented as

[tex]t = \frac{\= x - \mu }{\frac{\sigma }{\sqrt{n} } }[/tex]

=> [tex]t = \frac{ -7.37 - 0 }{\frac{10.926}{\sqrt{13} } }[/tex]

=> [tex]t = -2.838[/tex]

Generally the p-value is mathematically represented as

[tex]p-value = 2 P(t < -2.432)[/tex]

From the z-table  [tex]P(t < -2.432) =  0.0075 [/tex]

So  [tex]p-value  =  2* 0.0075 [/tex]

=>  [tex]p-value  = 0.015 [/tex]

So given that  p-value is  less than the [tex] \alpha = 0.05[/tex] then we reject the null hypothesis and conclude that the oscilloscope has an error bias

   

Help pls it’s urgent

Answers

Answer:

A

Explanation:

Refraction

refraction
explanation: refraction is the bending of light as it passes from one medium into another.
Other Questions
If point A is located at (5, -7), and there are 8 points between A and B, which of the following could be the possible coordinates for point B? What does the next consecutive odd number afteranother odd number mean? Thanks Summarize the political philology of jonh Locke. Read the passage below from Marigolds and answer the question.I had indeed lost my mind, for all the smoldering emotions of that summer swelled in me and burstthe great need for my mother who was never there, the hopelessness of our poverty and degradation, the bewilderment of being neither child nor woman and yet both at once, the fear unleashed by my fathers tears. And these feelings combined in one great impulse toward destruction.Based on the passage above, which of the following themes are evident in the story?-loss of innocence-good overcomes evil-value of family-love and sacrifice When a hair dryeris being used, one of the energy transformations that takes place is Amaterasu, the sun goddess, once shared the sky with her brother,Tsukuyomi, the god of the moon. Then, Tsukuyomi killed the goddessof food. Amaterasu grew to hate her brother and separated herselffrom him; thus, day and night became divided.Which common motif from mythology is most clearly shown in the story?A. Physical transformationB. Explanations of natureC. The hero's journeyO D. The dangers of arrogance What did many people base their views on during the Enlightenment? A:Faith B:emotions C:astrology D:Reason Oate's expedition suffered from ________ bad reputation.a.Cabeza de Vacasc.Hernando de Sotosb.Fray Marcos de Nizasd.Coronados Coral reefs are the most diverse of all marine ecosystems. They are home to almost one quarter of all ocean species. Coral reefs are also important to people, providing food, protection of shorelines, tourism jobs, and even medicines. However, this is a fragile ecosystem, threatened by human activity and environmental changes. Which of these threats is not caused by abiotic factors? A) Coral reefs are affected by overfishing. B) Coral reefs are affected by changing ocean chemistry. C) Coral reefs are affected by global warming due to increases in greenhouse gases. D) Coral reefs are affected by pollution due to runoff of chemicals into the ocean. Find the value of c so that (x+1) is a factor of the polymonial p(x)=5x^4+7x^3-2x^2-3x+c New immigrants to the United States during the late 19th century and early 20th century were from centralEurope.True or false? Payback period computation; even cash flows LO P1Compute the payback period for each of these two separate investments:a. A new operating system for an existing machine is expected to cost $520,000 and have a useful life of six years. The system yields an incremental after-tax income of $150,000 each year after deducting its straight-line depreciation. The predicted salvage value of the system is $10,000.b. A machine costs $380,000, has a $20,000 salvage value, is expected to last eight years, and will generate an after-tax income of $60,000 per year after straight-line depreciation.Payback periodChoose Numerator: / Choose Denominator: = Payback period / = Payback perioda. = b. = A line contains the points -1 , -4 and -6,11 what is the slope of a line that is parallel to this line What were explorers like Christopher Columbus looking for when they sailedacross the Atlantic? 1. find the distance between the points (-4,-6 ) and (8,5) to the nearest 100th of a unit. *(3 Points)16.2616.3216.28 As the landscape changed from brown to green, the army awakened and began to tremble with eagerness at the noise of the rumors. theme in How to Be Chinese Which choices represent the purpose for the Committees of Correspondence? PLEASE HELPWhich graphs display a directly proportional relationship? Check all that apply.On a coordinate plane, a line goes through points (0, 0) and (1, negative 3).On a coordinate plane, a line goes through points (0, 1) and (1, 2).On a coordinate plane, a line goes through points (0, 0) and (1, 3).On a coordinate plane, a line goes through points (0, 0) and (2, 2). HELP I SUCK AT MATH HELP ASAP PLZZZ!!! GIVING BRIANLIEST AND POINTS.Henry is starting a t-shirt printing business and plans on selling each shirt for $30, with his cost being $8 per shirt. The equipment will cost $1200.Henry orders 600 shirts and determines that the profit for his new business is modeled by the function p = 22x - 1200. What is the range of this function in this context? A) {0 p 500} B) {0 p 500} C) {-1,200 p 2,000} D) {-1,200 p 12,000}