. ethanol (ch3ch2oh) burns in air to generate carbon dioxide and water, a. write a balanced equation to show this reaction b. determine the volume of air (not oxygen) in liters at 35 degrees c and 790 mm hg required to burn 250 grams of ethanol.

The percent yield for the given reaction is 85.29%.

The percent yield for this reaction can be calculated using the formula:

percent yield = (actual yield / theoretical yield) x 100

The theoretical yield can be calculated based on the stoichiometry of the reaction. From the equation given, we know that 1 mole of (E)-stilbene reacts with 1 mole of pyridinium bromide perbromide to produce 1 mole of meso-stilbene dibromide.

First, let's calculate the number of moles of (E)-stilbene:

213 mg (E)-stilbene x 1 g/1000 mg x 1 mol/180.25 g = 0.00118 mol (E)-stilbene

Next, let's calculate the number of moles of pyridinium bromide perbromide:

435 mg pyridinium bromide perbromide x 1 g/1000 mg x 1 mol/319.82 g = 0.00136 mol pyridinium bromide perbromide

Since the stoichiometry is 1:1, the number of moles of meso-stilbene dibromide produced is also 0.00118 mol.

Finally, let's calculate the theoretical yield in grams:

theoretical yield = 0.00118 mol x 340.05 g/mol = 0.401 g

Now we can calculate the percent yield:

percent yield = (0.342 mg / 0.401 g) x 100 = 85.29%

Therefore, the percent yield for this reaction is 85.29%.

Learn more about percent yield at https://brainly.com/question/14714924

#SPJ11

The mass of dissolved solids in 1 m³ of the water sample is 16 g.

To convert from cm³ to m³, we divide by 1,000,000 (10^6) since there are 1,000,000 cm³ in 1 m³.

First, we need to find the mass of dissolved solids in 1 cm³ of the water sample:

Next, we can find the mass of dissolved solids in 1 m³ of the water sample:

However, the answer should be given in standard form, so we convert 640 to scientific notation:

To learn more about mass of dissolved solids, here

https://brainly.com/question/14906002

#SPJ4

The acid strength increases with increasing acidity, which is the tendency to donate a proton (H+). H2Te < H2Se < H2S

The acidity of an acid is related to its acid dissociation constant (Ka). The higher the Ka, the stronger the acid.

The Ka values for the given acids are:

H2S: Ka = [tex]9.0 × 10^-8[/tex]

H2Se: Ka = [tex]1.3 × 10^-8[/tex]

H2Te: Ka = [tex]3.3 × 10^-9[/tex]

Therefore, the order of increasing acid strength is:

H2Te < H2Se < H2S

This is because H2Te has the lowest Ka value, indicating that it is the weakest acid of the three. Conversely, H2S has the highest Ka value, indicating that it is the strongest acid of the three.

To know more about acid dissociation constant refer to-

https://brainly.com/question/31386094

#SPJ11

By combining 125.0 grams of Pb(SO4)2 with an excess of LiNO3, we will be able to make 145.5 grams of Li2SO4.

What is Stoichiometry ?

Stoichiometry is the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It involves the calculation of the amounts of reactants needed to produce a certain amount of product, or the amount of product that can be produced from a given amount of reactants.

To determine the amount of Li2SO4 produced, we need to use stoichiometry and balance the chemical equation for the reaction between Pb(SO4)2 and LiNO3:

Pb(SO4)2 + 2LiNO3 → Pb(NO3)2 + 2LiSO4

From the balanced equation, we can see that one mole of Pb(SO4)2 reacts with 2 moles of LiNO3 to produce 2 moles of LiSO4. Therefore, we need to convert the mass of Pb(SO4)2 given to moles, and then use the mole ratio to calculate the amount of Li2SO4 produced.

125.0 g Pb(SO4)2 × 1 mol Pb(SO4)2 / Pb(SO4)2 molar mass = 0.404 mol Pb(SO4)2

Next, we use the mole ratio between Pb(SO4)2 and Li2SO4 to calculate the number of moles of Li2SO4 produced:

0.404 mol Pb(SO4)2 × 2 mol LiSO4 / 1 mol Pb(SO4)2 = 0.808 mol Li2SO4

Finally, we convert the number of moles of Li2SO4 to grams:

0.808 mol Li2SO4 × Li2SO4 molar mass = 145.5 g Li2SO4

Learn more about Stoichiometry from the given link

https://brainly.com/question/16060223

#SPJ1

we need 5.65 mL of a 6.00 M HCl solution to react with excess Fe2O3 to produce 16.5 g of FeCl3.

The balanced chemical equation for the reaction between Fe2O3 and HCl is:

Fe2O3 + 6 HCl → 2 FeCl3 + 3 H2O

We can use the given mass of FeCl3 to calculate the number of moles of FeCl3 produced:

mass of FeCl3 = 16.5 g
molar mass of FeCl3 = 162.2 g/mol
moles of FeCl3 = mass/molar mass = 16.5 g / 162.2 g/mol = 0.1017 mol

From the balanced chemical equation, we see that the stoichiometry between HCl and FeCl3 is 6:2, which simplifies to 3:1:

3 HCl → 1 FeCl3

Therefore, we need one-third as many moles of HCl as moles of FeCl3:

moles of HCl = 1/3 × moles of FeCl3 = 0.0339 mol

Now we can use the definition of molarity to calculate the volume of 6.00 M HCl solution needed:

moles of HCl = M × V
V = moles of HCl / M

V = 0.0339 mol / 6.00 mol/L = 0.00565 L

Finally, we can convert the volume to milliliters:

0.00565 L × 1000 mL/L = 5.65 mL

Therefore, we need 5.65 mL of a 6.00 M HCl solution to react with excess Fe2O3 to produce 16.5 g of FeCl3.
Visit to know more about HCl solution:-

https://brainly.com/question/27576431

#SPJ11

Hi! Element "t" does not exist in the periodic table.  

The known chemical elements are listed in the periodic chart in increasing atomic number order. Elements that have comparable chemical and physical properties are grouped together in columns referred to as "groups" in the table's rows and columns. The periodic table has 18 groups, numbered from 1 to 18.

In chemical equations and formulas, each element in the periodic table is represented by a distinct symbol made up of one or two letters. For instance, the letters "H" and "He" stand for hydrogen, "C" stands for carbon, and so on.

If you could provide me with more information about the element you are referring to, such as its full name or its atomic number, I would be happy to help you locate it on the periodic table and tell you which group it belongs to.

To know more about the periodic table, click here;

https://brainly.com/question/31672126

#SPJ11

Answer:

yes

Explanation:

yes, avalanches a big part in the shaping of the earths surface.

Yes, avalanches can play a significant role in shaping the Earth's surface, particularly in mountainous areas.

The movements of snow, ice, and debris down a slope known as avalanches can significantly impact the Earth's surface, especially in mountainous regions. These natural occurrences can cause various landscape changes, erosion, and deposition.

The dilution formula is a mathematical expression used to calculate the final concentration of a solution after it has been diluted.

The formula is:

C1V1 = C2V2

where:

C1 = the initial concentration of the solution

V1 = the initial volume of the solution

C2 = the final concentration of the solution

V2 = the final volume of the solution

1) 250 * 10 = 0.5 * v2

v2 = 5000 mL

2) 400 * 15 = 2000 *c2

c2 = 3M

3) 50 * 20 = 1000 * c2

c2 = 1 M as shown

Learn more about dilution formula:https://brainly.com/question/3078179

#SPJ1

The pressure will be 139.92 kPa at a volume of 27.5 mL.

To answer this question, we will use Boyle's Law formula, which states that the product of the initial pressure (P1) and volume (V1) of a gas is equal to the product of the final pressure (P2) and volume (V2) when the temperature remains constant.


Step 1: Identify the initial pressure (P1), initial volume (V1), and final volume (V2).

P1 = 102.3 kPa
V1 = 37.5 mL
V2 = 27.5 mL

Step 2: Apply Boyle's Law formula, which is P1 * V1 = P2 * V2. We need to find the final pressure (P2).

102.3 kPa * 37.5 mL = P2 * 27.5 mL

Step 3: Solve for P2.

P2 = (102.3 kPa * 37.5 mL) / 27.5 mL

Step 4: Calculate the value of P2.

P2 ≈ 139.64 kPa

At 27.5 mL, the pressure of the gas will be approximately 139.64 kPa.

Learn more about pressure at https://brainly.com/question/28012687

#SPJ11

When given 47.5 L of chlorine gas, approximately 4.1 moles of potassium chloride will be produced.

To determine the number of moles of potassium chloride (KCl) produced when given 47.5 L of chlorine gas (Cl₂), follow these steps:

Step 1: Write the balanced chemical equation.
The given equation is K + Cl₂ → KCl. We need to balance it, which will give us:
2K + Cl₂ → 2KCl

Step 2: Convert the volume of chlorine gas to moles using the ideal gas law.
The ideal gas law is PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is temperature in Kelvin. We need to make some assumptions since we are only given the volume (47.5 L). Assuming standard temperature and pressure (STP) conditions, the temperature is 273.15 K, and the pressure is 1 atm.

Rearrange the equation to solve for moles (n):
n = PV/RT

Plug in the values:
n = (1 atm)(47.5 L) / (0.0821 L·atm/mol·K)(273.15 K)
n ≈ 2.05 moles of Cl₂

Step 3: Use the stoichiometry of the balanced equation to find the moles of KCl produced.
From the balanced equation, we see that 1 mole of Cl₂ produces 2 moles of KCl.

Now, use the ratio to find the moles of KCl:
2.05 moles Cl₂ × (2 moles KCl / 1 mole Cl₂) = 4.1 moles of KCl

So, when given 47.5 L of chlorine gas, approximately 4.1 moles of potassium chloride will be produced.

To know more about ideal gas law :

https://brainly.com/question/30458409

#SPJ11

Baking soda is actually a compound known as sodium bicarbonate, which is water-soluble. Sugar, on the other hand, is also soluble in water and other liquids that contain water.

This means that it dissolves in water and can also dissolve in other liquids that contain water, such as soda. Therefore, baking soda is indeed soluble in soda.

Sugar, on the other hand, is also soluble in water and other liquids that contain water. This includes soda, which is a carbonated beverage that typically contains a high amount of dissolved sugar.

However, the solubility of sugar in soda can depend on various factors such as the temperature of the soda, the amount of sugar present, and the type of sugar used.

In general, both baking soda and sugar are soluble in soda and can dissolve to some extent. However, the exact degree of solubility can vary depending on various factors. It is worth noting that excessive consumption of sugary soda can have negative impacts on health, so it is important to consume such beverages in moderation.

To know more about sodium bicarbonate, visit:

https://brainly.com/question/8560563#

#SPJ11

Katja is using different colors of paper in her experiment to test her hypothesis that the black sheet of paper will increase the most in temperature when exposed to white light.

Each color of paper will absorb different wavelengths of light, and the amount of energy absorbed will depend on the color of the paper. Black paper will absorb all wavelengths of light and therefore absorb the most energy, leading to an increase in temperature.

On the other hand, white paper will reflect all wavelengths of light and absorb the least amount of energy, leading to a smaller increase in temperature compared to black paper.

By testing multiple colors of paper, Katja can compare the temperature increases of each color and determine which color absorbs the most energy and which absorbs the least. This will provide her with more data to support her hypothesis and better understand the relationship between color and the absorption of energy from light.

To know more about wavelengths of light, refer here:

https://brainly.com/question/31326088#

#SPJ11

DNA analysis has revolutionized forensic science in the past few decades. It has become an indispensable tool for crime scene investigations, identifying suspects, and exonerating the innocent.

The history of DNA analysis dates back to 1984, when British geneticist Alec Jeffreys developed the technique of DNA fingerprinting. He used variable number tandem repeats (VNTRs) to create a unique DNA profile for each individual.

In 1986, DNA analysis was first used in a cri-minal case, where it was used to exonerate a man who had been wrongly convicted of ra-pe and mu-rder. Since then, DNA analysis has been used in several high-profile cases, such as the OJ Simpson trial in 1995 and the identification of 9/11 victims in 2001.

The technique of DNA fingerprinting evolved over the years, with the development of polymerase chain reaction (PCR) and short tandem repeats (STRs) in the 1990s. PCR enabled amplification of DNA samples, while STRs provided greater discrimination power in creating unique DNA profiles.

The first DNA database was established in the UK in 1995, followed by the US in 1998. Today, DNA databases are used worldwide for identifying suspects and matching DNA samples to cri-me scenes.

The latest advancements in DNA analysis include next-generation sequencing (NGS), which can analyze entire genomes, and mitochondrial DNA analysis, which can identify maternal lineage.

In conclusion, DNA analysis has come a long way since its inception in the 1980s. It has become an essential tool for forensic investigations and has contributed significantly to the justice system. The technique continues to evolve, and future advancements in DNA analysis will undoubtedly improve its effectiveness and accuracy.

To know more about DNA analysis, visit:

https://brainly.com/question/19340987#

#SPJ11

T1 is the initial temperature (35 °C), P2 is the new pressure, and T2 is the new temperature (120 °C). P2 is 6.86 atm.

Temperature is the measure of the average kinetic energy of particles in a substance. It is usually measured in degrees Celsius (°C), Kelvin (K), or Fahrenheit (°F). Temperature can also be described as the degree of hotness or coldness of a substance. Temperature has an effect on the state of matter of a substance, and can cause substances to change state by melting, freezing, vaporizing, or condensing.

The pressure of a gas is directly proportional to its temperature. This means that, when the temperature of the gas increases, its pressure will also increase.
Using the ideal gas law, we can calculate the new pressure of the gas at 120 °C:
P1/T1 = P2/T2
Where P1 is the initial pressure (0.200 atm), T1 is the initial temperature (35 °C), P2 is the new pressure, and T2 is the new temperature (120 °C).
P2 = (0.200 atm x 120 °C) / 35 °C
P2 = 6.86 atm.

To learn more about temperature
https://brainly.com/question/4735135
#SPJ1

From the calculations, we can see that the mass of the acetic acid that is produced is 28.2 g.

In a chemical reaction involving two or more reactants, the limiting reactant is the reactant that is consumed completely, thereby limiting the amount of product that can be formed. The other reactant(s) that remain after the limiting reactant is completely consumed are called excess reactants.

Number of moles of CH3CHO = 20.8g/44 g/mol

= 0.47 moles

Number of moles of O2 = 14.5 g/32 g/mol

= 0.45 moles

If 2 moles of CH3CHO reacts with 1 mole of O2

0.47 moles of CH3CHO would react with 0.47 * 1/2

= 0.24 moles

Thus CH3CHO is the limiting reactant

Mass of the acetic acid produced = 0.47 moles * 60 g/mol

= 28.2 g

Learn more about acetic acid:https://brainly.com/question/15202177

#SPJ1

Milk is commonly packaged in different types of containers, such as cartons, plastic bottles, and glass bottles. Each packaging type has its physical and chemical properties, which can affect the quality, shelf-life, and safety of the product.

Cartons are commonly used for shelf-stable milk products, such as UHT (ultra-high temperature) milk, and are made of paperboard, plastic, and aluminum layers. These materials provide a barrier against light, oxygen, and moisture, which helps to preserve the milk's freshness and flavor. Moreover, cartons are lightweight and stackable, which makes them easy to store and transport.

Plastic bottles are widely used for packaging fresh milk, and the choice of plastic depends on the application. For example, high-density polyethylene (HDPE) is commonly used for milk jugs due to its high strength and stiffness, while low-density polyethylene (LDPE) is used for milk bags due to its flexibility and durability.

Plastic bottles are lightweight, shatter-resistant, and provide a good barrier against oxygen and water vapor.

Glass bottles are another popular choice for milk packaging, and they provide an airtight and inert container for milk. Glass is impermeable to gases and does not interact chemically with the milk, which helps to maintain the milk's freshness and flavor.

However, glass is relatively heavy, fragile, and requires more energy to manufacture and transport compared to other packaging materials.

The choice of packaging material depends on various factors, such as the product's properties, manufacturing cost, consumer preference, and environmental impact. The reactivity of a material depends on its position in the periodic table, with metals being more reactive than nonmetals.

Aluminum is a highly reactive metal, but it forms a protective oxide layer that prevents further reaction with the environment. Therefore, it is commonly used for making cooking utensils as it is lightweight, durable, and has good thermal conductivity.

The packaging plays an essential role in protecting the product from contamination, physical damage, and deterioration. The use of improper packaging materials or techniques can lead to the growth of microorganisms, loss of nutrients, off-flavors, and potential health hazards.

For example, the migration of harmful chemicals from plastic packaging into food can cause health problems such as endocrine disruption, cancer, and reproductive disorders.

To know more about chemical properties refer to-

https://brainly.com/question/1935242

#SPJ11

A brick with dimensions 1.00 m x 0.200 m x 0.500 m exerts different pressures on the floor when placed in different ways. The force exerted on the floor is 20.0 N.

To calculate the force exerted on the floor by the brick, we need to first calculate the area of the face of the brick that is in contact with the floor. The minimum pressure exerted by the brick on the floor is given as 100.0 Pa. Therefore, the force exerted on the floor by the brick can be calculated as:

Force = Pressure x Area

The area of the face of the brick in contact with the floor is given by 1.00 m x 0.200 m = 0.200 m². Therefore, the force exerted on the floor by the brick is:

Force = 100.0 Pa x 0.200 m² = 20.0 N

Since 20.0 N is not listed in the given options, it seems there may be an error or discrepancy in the provided answer choices.

To know more about the force exerted refer here :

https://brainly.com/question/18315231#

#SPJ11

The solubility of the magnesium fluoride, MgF₂, in the water is 1.5 × 10⁻² g/l. The solubility  of magnesium fluoride in 0.13 M of the sodium fluoride, NaF is 0.88 M.

The solubility, Ksp = 1.5 × 10⁻² g/L

The concentration , NaF = 0.13 M

The solubility of the magnesium fluoride that is MgF₂ is expressed as :

The solubility of the magnesium fluoride = Ksp / NaF²

The solubility of the magnesium fluoride = 1.5 × 10⁻² / (0.13 )²

The solubility of the magnesium fluoride = 0.88 M

Therefore, the solubility of the magnesium fluoride  in 0.13 M of the sodium fluoride is 0.88 M.

To learn more about solubility here

https://brainly.com/question/14524193

#SPJ4

Ans.1

blank 1 =1

blank 2 = 3

blank 3 = 2

Ans.2

blank 1 = 6

blank 2 = 4

blank 3 = 5

Ans.

blank 1 = 11

blank 2 =  7

blank 3 = 8

The molar mass of [tex]CHOCH[/tex] is 64.05 g/mol, which means that one mole of [tex]CHOCH[/tex] has a mass of 64.05 grams.

The molar mass of a compound is the mass in grams of one mole of the substance. To calculate the molar mass of [tex]CHOCH[/tex], we need to determine the atomic masses of all the atoms in one molecule of the compound and add them together.

[tex]CHOCH[/tex] has one carbon (C) atom, three oxygen (O) atoms, and four hydrogen (H) atoms. The atomic mass of C is 12.01 g/mol, O is 16.00 g/mol, and H is 1.01 g/mol. Therefore, we can calculate the molar mass of [tex]CHOCH[/tex] as follows:

Molar mass = (1 x atomic mass of C) + (3 x atomic mass of O) + (4 x atomic mass of H)

Molar mass = (1 x 12.01) + (3 x 16.00) + (4 x 1.01)

Molar mass = 64.05 g/mol

Therefore, the molar mass of [tex]CHOCH[/tex] is 64.05 g/mol, which means that one mole of [tex]CHOCH[/tex] has a mass of 64.05 grams.

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

Water is a clear liquid at room temperature, composed of hydrogen and oxygen. It is essential for life, has different properties from its constituent elements, and forms through chemical bonding of hydrogen and oxygen atoms in covalent bonds.

Answers to given questions are as follows :

1. I have chosen water.

2. Water is a clear, odorless, and tasteless liquid that occurs in the liquid phase at room temperature and pressure. It is not poisonous and is essential for life. Water is used for various purposes such as drinking, cooking, and cleaning. It can also be used as a solvent, coolant, and as a reactant in many chemical reactions.

3. The elements that make up water are hydrogen and oxygen.

4. Hydrogen is a colorless, odorless, and tasteless gas at room temperature and pressure. It is highly flammable and can form explosive mixtures with air. Oxygen is a colorless, odorless, and tasteless gas at room temperature and pressure. It is essential for life and is used in the production of steel, chemicals, and medical applications.

5. Water has very different properties from the properties of its individual elements. For example, while hydrogen is highly flammable, water is not flammable at all. Oxygen is necessary for combustion, but water is used to extinguish fires. Water is a liquid at room temperature and pressure, while both hydrogen and oxygen are gases.

6. The difference in properties between the elements and the compound can be explained by the formation of chemical bonds between the atoms of the elements. In the case of water, hydrogen and oxygen atoms combine to form water molecules through the sharing of electrons in covalent bonds. This results in a new substance with different properties than the individual elements.

To know more about the Water refer here :

https://brainly.com/question/16630851#

#SPJ11

The pH of the buffered solution is 4.374.

A buffered solution is a solution that resists changes in pH when small amounts of acid or base are added to it.

In order to calculate the pH of a buffered solution, we need to use the Henderson-Hasselbalch equation, which is pH = pKa + log([A-]/[HA]). In this equation, pKa is the dissociation constant of the weak acid (benzoic acid in this case), [A-] is the concentration of the conjugate base (sodium benzoate), and [HA] is the concentration of the weak acid.

First, we need to find the concentrations of benzoic acid and sodium benzoate in the solution. We can use the equation n = cV, where n is the number of moles, c is the concentration, and V is the volume.

For benzoic acid:
n = (21.5 g / 122.12 g/mol) = 0.176 mol
c = 0.176 mol / 0.2 L = 0.88 M
[HA] = 0.88 M

For sodium benzoate:
n = (37.7 g / 144.11 g/mol) = 0.262 mol
c = 0.262 mol / 0.2 L = 1.31 M
[A-] = 1.31 M

Next, we need to find the pKa of benzoic acid. The pKa of benzoic acid is 4.20.

Now we can plug in the values into the Henderson-Hasselbalch equation:
pH = 4.20 + log([1.31]/[0.88])
pH = 4.20 + log(1.49)
pH = 4.20 + 0.174
pH = 4.374

Therefore, the pH of the buffered solution is 4.374.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

The complexity differences between Spectra C and D suggest that the regioselectivity of bromination of aniline versus acetanilide is different. Specifically, Spectra C shows the proton NMR spectrum of a mixture of aniline and p-bromoaniline, while Spectra D shows the proton NMR spectrum of a mixture of acetanilide and p-bromoacetanilide.

The complexity differences between Spectra C and D suggest that the regioselectivity of bromination of aniline versus acetanilide is different. Specifically, Spectra C shows the proton NMR spectrum of a mixture of aniline and p-bromoaniline, while Spectra D shows the proton NMR spectrum of a mixture of acetanilide and p-bromoacetanilide.

This indicates that the bromination of aniline is less regioselective than the bromination of acetanilide, meaning that multiple products are formed in significant amounts. In contrast, the bromination of acetanilide is more regioselective, resulting in a higher proportion of the desired product (p-bromoacetanilide) and fewer side products. The diffdifferenceerence in regioselectivity is likely due to the fact that the amino group in aniline is more strongly activating towards electrophilic aromatic substitution reactions than the amide group in acetanilide.
Visit to know more about spectra:-

https://brainly.com/question/29004429

#SPJ11

The standard deviation for Zn is 0.05528%, and for Sn is 0.000336%. The coefficients of variation are 0.1658% for Zn and 1.379% for Sn.

To calculate the standard deviation and coefficient of variation, we need to first find the mean and variance of the data.

For Zn;

Mean = (33.27 + 33.37 + 33.34) / 3 = 33.3267%

Variance = [(33.27 - 33.3267)² + (33.37 - 33.3267)² + (33.34 - 33.3267)²] / 2

= 0.00305627

For Sn;

Mean =(0.022 + 0.025 + 0.026) / 3

= 0.0243%

Variance = [(0.022 - 0.0243)² + (0.025 - 0.0243)² + (0.026 - 0.0243)²] / 2

= 1.13E-07

Now we calculate the standard deviation and coefficient of variation;

Standard deviation (Zn) = √(0.00305627)

= 0.05528%

Standard deviation (Sn) = √(1.13E-07)

= 0.000336%

Coefficient of variation (Zn) = (0.05528 / 33.3267) x 100%

= 0.1658%

Coefficient of variation (Sn) = (0.000336 / 0.0243) x 100%

= 1.379%

Therefore, the standard deviation for Zn and Sn is 0.05528% and 0.000336%. The coefficients of variation for Zn and Sn is  0.1658% and  1.379%.

To know more about coefficient of variation here

https://brainly.com/question/13293164

#SPJ4

Ionization energy for the neutral Li atom in its ground state is approximately 520.9 kJ/mol.

The energy required to remove an electron from an atom in its ground state is the ionization energy. In this problem, we are given the wavelengths of various transitions of neutral Li atoms. From these wavelengths, we can calculate the energy of each transition using the equation E=hc/λ,

where h is Planck's constant,

c is the speed of light

λ is the wavelength.

Using the given wavelengths, we can calculate the energy of each transition and determine the difference in energy between the ground state and the excited state. The ionization energy is the energy required to remove an electron from the ground state, which is equal to the energy difference between the ground state and the ionized state.

In this case, the transition from the ground-state configuration 1s²2s¹ to the 2P term occurs at 670.78 nm. From this, we can calculate the energy difference between the ground state and the 2P term. Then, by adding the energy differences between the 2P and 2D terms, and the 2D and 2S terms, we can calculate the ionization energy of the ground-state atom. As a result, when the temperature lowers to 8.5°C in the evening, the volume of the vessel is roughly 2.64 L.

To know more about the Ionization energy, here

https://brainly.com/question/13088843

#SPJ4

It is not enough to just know the mass of each reactant to determine the limiting reagent in a chemical reaction. The limiting reagent is the reactant that gets completely consumed during a chemical reaction, which limits the amount of product that can be formed.

To determine the limiting reagent, you need to compare the amount (in moles) of each reactant present, rather than just the mass. This is because different reactants have different molar masses, and therefore the same mass of two different reactants would have different numbers of moles.

Once you have determined the amount (in moles) of each reactant present, you can use stoichiometry to calculate how much product can be formed from each reactant. The reactant that produces the smallest amount of product is the limiting reagent.

To know more about the Reaction, here

https://brainly.com/question/30324543

#SPJ1

B. Zn (s) + H2SO4 (aq) ZnSO4 (aq) + H2 (l) of the following chemical reactions is a single replacement reaction

A single-displacement reaction occurs when a more reactive ingredient in a compound replaces a less reactive member. Metal displacement, hydrogen displacement, and halogen displacement are the three different categories of displacement processes.

Chlorine takes the place of bromine when it is introduced to a solution of sodium bromide in gaseous form (or as a gas dissolved in water). Chlorine, which is more reactive than bromine, causes sodium bromide to lose bromine, which causes the solutions to become blue.

learn more about single-displacement

https://brainly.com/question/7959057

#SPJ1

The Michaelis-Menten equation is used to describe the relationship between the rate of an enzymatic reaction and the substrate concentration. The equation is as follows:

v = (Vmax [S]) / (Km + [S])

where v is the initial velocity of the reaction, Vmax is the maximum velocity of the reaction, [S] is the substrate concentration, and Km is the Michaelis constant.

Km represents the substrate concentration at which the enzyme reaction rate is half of its maximum rate (Vmax). It is a measure of the affinity of the enzyme for its substrate. The units of Km depend on the units used for [S] and Vmax in the equation.

In the given scenario, V (initial) = 0.5 (Vmax), which means the initial reaction rate is half of the maximum reaction rate. Therefore, the substrate concentration at this point is equal to Km. As Km is a measure of substrate concentration, its units will be the same as the units of the substrate concentration, which can vary depending on the context.

Visit here to learn more about Michaelis-Menten equation brainly.com/question/30756012

#SPJ11

The value of costant K at 234 K is 0.13.

What is the costant (K)?

To solve this problem, we can use the van 't Hoff equation:

ln(K2/K1) = -(ΔH°/R) * (1/T2 - 1/T1)

where K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH° is the standard enthalpy change for the reaction, R is the gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for K2:

K2 = K1 * [tex]e^{(-(ΔH°/R)}[/tex] * (1/T2 - 1/T1))

Plugging in the given values, we get:

K1 = 10.5

T1 = 350 K

T2 = 234 K

ΔH° = -18.8 kJ/mol (be careful with the units!)

R = 8.314 J/(mol*K)

K2 = 10.5 * [tex]e^{(-(-18.810^3 J/mol)/(8.314 J/(molK)) * (1/234 K - 1/350 K))}[/tex]

K2 = 0.13

Therefore, the value of K at 234 K is 0.13.

What is equilibrium constant?

Equilibrium constant (K) is a thermodynamic constant that describes the ratio of the concentrations or pressures of reactants and products in a chemical reaction that has reached equilibrium at a given temperature and pressure. The value of K provides important information about the position of equilibrium and the relative amounts of reactants and products at equilibrium. If K is greater than 1, the reaction favors the products at equilibrium, whereas if K is less than 1, the reaction favors the reactants at equilibrium. If K is equal to 1, the reaction is at equilibrium and the concentrations or pressures of the reactants and products are equal.

To know more about equilibrium constant, visit:

https://brainly.com/question/14932239

#SPJ9

To determine the number of carbon atoms in 0.008 moles of C3H7OH, we first need to find the molar mass of the compound.

The molar mass of C3H7OH can be calculated by adding the atomic masses of all the atoms in the molecule:

3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol

This means that 1 mole of C3H7OH has a mass of 60.096 g.

To calculate the number of moles of carbon atoms in 0.008 moles of C3H7OH, we need to multiply the number of moles of C3H7OH by the number of carbon atoms in one mole of C3H7OH.

One mole of C3H7OH contains 3 carbon atoms, so 0.008 moles of C3H7OH contains:

0.008 moles x 3 = 0.024 moles of carbon atoms

Finally, we can convert moles of carbon atoms to the number of carbon atoms using Avogadro's number, which is 6.022 x 10^23 atoms per mole:

0.024 moles x 6.022 x 10^23 atoms/mole = 1.445 x 10^22 atoms of carbon

Therefore, 0.008 moles of C3H7OH contains 1.445 x 10^22 atoms of carbon.

To learn more about propanol, click here:  https://brainly.com/question/30909638

#SPJ11