end users have zero control over their browser cookies set by php. group of answer choices true false

A large corporation that needs a high-speed network to test a product that will backup and restore terabytes of data should use a high-speed Local Area Network (LAN) or a Wide Area Network (WAN) with high bandwidth and low latency. These networks will allow for faster data transfer and efficient backup and restoration of large amounts of data.

A large corporation needs a high-speed network to test a product that will backup and restore terabytes of data. The type of network they should use is a Storage Area Network (SAN).

What is a Storage Area Network (SAN)?

A Storage Area Network (SAN) is a high-speed network of storage devices that provides block-level storage access to applications and servers. SANs are typically used to improve application availability, simplify storage management, and improve resource utilization.SANs provide access to consolidated block-level storage. They are typically composed of hosts, switches, storage elements, and storage devices that are interconnected using a variety of topologies, protocols, and technologies to form a holistic storage infrastructure that is highly available, scalable, and resilient.

The primary purpose of a SAN is to provide access to shared storage devices such as disk arrays, tape libraries, and other storage resources.

A SAN provides block-level storage access, which means that a server can access a storage device using a unique identifier (known as a LUN) rather than a file name, path, or drive letter. SANs are ideal for data backup and disaster recovery scenarios that require the fast transfer of large amounts of data between devices.
Learn more about LAN

https://brainly.com/question/19424964

#SPJ11

To implement the following Boolean expression using a ROM, the best course of action is to construct a truth table. We will utilize the truth table to establish the bits and bytes of the ROM. The truth table for the Boolean expression will then be transformed into a binary code. The size of ROM is 20 bits and 30 bytes.

The size of ROM in bits and bytes will then be determined based on the binary code.ROM (Read-Only Memory) is a type of storage that is typically used in computers and other digital systems to store permanent or semi-permanent data that cannot be altered by the user.

The contents of a ROM chip are established during the manufacturing process and are permanent. When a computer system is turned on, the data in the ROM chip is automatically loaded into the system's RAM (Random Access Memory) for processing. A ROM is used to implement a Boolean expression because it contains a fixed set of instructions that cannot be modified.

As a result, ROM is ideal for storing logic tables, such as Boolean expressions. The following is the procedure for implementing the given Boolean expression using a ROM:

For this expression, we will have 3 variables (P, Q, and R), which will require a total of 8 rows to complete the truth table. We will then transform this table into binary code as follows:

Binary Code: 11101011101111011111We will then establish the size of the ROM in bits and bytes based on the binary code. The size of the ROM in bits is equal to the number of bits in the binary code, which is 20 bits.

Since one byte is equivalent to 8 bits, the size of the ROM in bytes is equal to 20 bits divided by 8 bits, which is 2.5 bytes (3 bytes, after rounding up). Hence, the size of the ROM in bits is 20 bits, and the size of the ROM in bytes is 3 bytes.

You can learn more about Boolean expressions at: brainly.com/question/13265286

#SPJ11

The given list is bicep curls, burpees, push-ups, sit-ups, squats, and tricep dips with an iterator between burpees and push-ups. A call to next() would return the value "push-ups".

What is an iterator?An iterator is a type of object in Python that assists with the iteration of a sequence. It maintains an internal counter and provides two methods: `__next__()` and `__iter__()`.The `__next__()` method retrieves the next value from the sequence and raises the StopIteration exception if no items remain in the sequence. On the other hand, the `__iter__()` method returns the iterator object itself, allowing it to be used in a for loop.The `next()` function is a shortcut method for calling the `__next__()` method. It is used to retrieve the next item in the sequence's iteration.The list given in the question is:bicep curlsburpeespush-upssit-upssquattricep dipsThe question states that an iterator is used between burpees and push-ups. When `next()` is called on this iterator, it will return "push-ups" because that is the next element in the sequence after "burpees."Thus, a call to `next()` on this iterator will return the value "push-ups."

learn more about Python  here:

https://brainly.com/question/30427047

#SPJ11

The command you should use is "git checkout ." (git checkout space period) to discard all changes made to the modified files and revert them back to their last committed state.

To start from scratch on the task and discard the changes made to activity2, activity3, and activity4 without committing them, you can use the "git checkout" command with the file names to revert the changes back to the last committed state. The command would be "git checkout activity2 activity3 activity4". This will overwrite any changes made to these files since the last commit, effectively starting from scratch on the task. It is important to note that this command will discard any unsaved changes in the working directory, so be sure to save any important changes before running the command.

learn more about git checkout here:

https://brainly.com/question/29996577

#SPJ4

The best protection for an ingress/egress point of a corporate network can be provided by a combination of a Next-Generation Firewall (NGFW) and a Unified Threat Management (UTM) system. These two types of firewalls offer advanced security features and comprehensive threat protection.

When answering questions on the Brainly platform, it is important to be factually accurate, professional, and friendly. Additionally, it is important to be concise and not provide extraneous amounts of detail. Typos and irrelevant parts of the question should not be ignored. Lastly, the terms in the question should be used in the answer. Here are two answers to the question, "Which firewall would provide the best protection for an ingress/egress point of a corporate network? (select 2 answers)":1. Next-generation firewall2. Stateful inspection firewallBoth next-generation and stateful inspection firewalls would provide the best protection for an ingress/egress point of a corporate network. A next-generation firewall (NGFW) is a security device that combines traditional firewall functionalities with advanced security features like deep packet inspection, application awareness, and intrusion prevention. This type of firewall offers a higher level of security than traditional firewalls and is capable of defending against more advanced threats. On the other hand, a stateful inspection firewall is a type of firewall that monitors the state of active connections and determines which packets to allow through based on the connection state. It is a more advanced type of firewall that is capable of protecting against more sophisticated attacks.

Learn more about firewall here: brainly.com/question/13098598

#SPJ11

a. overwhelm the server with a denial of service (DoS)

Overwhelming the server with a denial of service (DOS) is not a method that a malicious person can use to masquerade as someone else when using email or instant messaging. Denial of service attacks is intended to slow down or disrupt network traffic or entire networks, making them unavailable to the users who rely on them. The attacker will deliberately direct a large amount of traffic to the target, usually with the aim of overwhelming the server and causing it to crash. The target may be a single computer, such as a website or an entire network. A DOS attack might be the result of a botnet assault or a network-based intrusion.

learn more about denial of service here:

https://brainly.com/question/30866798

#SPJ11

As a security analyst for a small corporate network, your task is to use Ettercap to initiate DNS spoofing to analyze its effects on the RMK Office Supplies site in an effort to defend against DNS spoofing attacks.

Ettercap is a comprehensive suite for Man in the Middle (MitM) attacks that lets you sniff live connections. Ettercap is a free, open-source, and easy-to-use tool for network monitoring and penetration testing. It is primarily utilized for testing the security of a LAN by conducting Man in the Middle (MitM) attacks, i.e., interception and modification of communication packets sent between two network connections.Ettercap supports both Linux and Windows operating systems. It provides many features, including SSL stripping, ARP spoofing, MITM, session hijacking, and other network layer hacking capabilities, in addition to DNS spoofing.What is DNS Spoofing?DNS spoofing is a technique that enables an attacker to inject malicious DNS data into a victim's DNS cache. DNS spoofing can be done using various techniques, including ARP Spoofing and Man in the Middle (MITM) attacks, among others. Attackers use this approach to redirect users to their malicious sites rather than legitimate sites.What is the function of a security analyst?A security analyst is in charge of preventing and identifying data theft and fraud while also safeguarding a company's computer systems and data.

Learn more about DNS spoofing here:

https://brainly.com/question/29670943

#SPJ11

Answer:

Explanation:

Select the range you want to name, including the row or column labels.

Click Formulas > Create from Selection.

In the Create Names from Selection dialog box, select the checkbox (es) depending on the location of your row/column header. ...

Click OK.

Answer:

To add a named range to an Excel worksheet, you can follow these steps:

1. Select the cells or range of cells that you want to name.

2. Click on the "Formulas" tab in the Excel ribbon.

3. Click on the "Define Name" button in the "Defined Names" group. Alternatively, you can press the "Ctrl + F3" shortcut key.

4. In the "New Name" dialog box, enter a name for the range in the "Name" field.

5. In the "Refers to" field, confirm that the correct range of cells is displayed. You can edit the range if necessary.

6. Click the "OK" button to save the named range.

The named range will now be available for use in formulas, charts, and other features of Excel. You can also view and manage named ranges in the "Name Manager" dialog box, which can be accessed by clicking the "Name Manager" button in the "Defined Names" group of the "Formulas" tab.Explanation:

The network administrator should start by diagnosing the root cause of the issues with phone calls. They can do this by checking the network infrastructure, analyzing call quality, and reviewing system logs to identify any patterns or problems. Once the cause is determined, they can implement the appropriate solutions to improve call quality and resolve the issues.

When answering questions on Brainly, it is important to always be factually accurate, professional, and friendly. Answers should be concise and not provide extraneous amounts of detail. Typos or irrelevant parts of the question should be ignored. When answering this particular question, the network administrator should start with examining the network capacity and checking for any network faults or issues. They should also investigate any reports of dropped calls or connectivity issues and try to identify any patterns or commonalities that may be causing the issues. They may need to upgrade network infrastructure or implement additional security measures to improve call quality and ensure better connectivity.

Learn more about network administrator here: brainly.com/question/14093054

#SPJ11

True, A biometric system is a system that analyses physical and behavioural traits for authentication, identification, and access control purposes.

physically disabled users might have difficulty with biometric system accessibility, specifically with performance-based biometrics. These systems use unique physical and behavioural characteristics of individuals, such as fingerprints, facial recognition, voice recognition, iris or retina patterns, and hand geometry, to identify them. Biometric systems are used in many industries, including healthcare, banking, travel, and law enforcement. Physically disabled users may have difficulty using biometric systems, particularly performance-based biometrics. It is because these systems require specific movements or actions that a physically disabled person may not be able to perform. For example, a person with an amputated arm may have difficulty providing a handprint, while someone with a visual impairment may not be able to look directly at a camera. As a result, alternative methods such as password or PIN-based authentication should be provided for those who are physically disabled.

Learn more about biometric here:

https://brainly.com/question/30470115

#SPJ11

Answer:

misalignment of paper

Explanation:

A paper needs to load in smoothly , completely flush with the tray

To reference the form with the name attribute "specs" and the id "specs entry" in JavaScript, you can use the following method:

```javascript
var form = document.getElementById("specsentry");
```

This method uses "getElementById" to find the form by its id, "specs entry," and stores it in the variable "form."

To reference the second form listed in the HTML file with the name attribute specs and the id specs entry in JavaScript, you can use the following code snippet: document.forms[1].name; document.forms[1].id; Explanation: In JavaScript, you can reference HTML form elements using the "document.forms" collection. The "document.forms" collection returns an array of all the forms in the current HTML document. The first form in the "document. forms" collection has an index of 0, the second form has an index of 1, and so on. Therefore, to reference the second form in the HTML document, you can use "document. forms[1]." Once you have a reference to the form element, you can access its attributes, such as `name` and `id` using dot notation. Therefore, to get the name and id of the second form in the HTML document, you can use the following code snippet: document. forms[1].name; document.forms[1].id;
visit here to learn more about JavaScript:

https://brainly.com/question/28448181

#SPJ11

To describe entity classes, the UML class diagram is commonly used. Entity classes are used to represent objects in a system, and the class diagram depicts the properties, methods, and relationships of each entity class.

In each entity class, information such as attributes, behaviors, and associations with other entity classes is recorded.

For boundary classes, the UML use case diagram is typically used. Boundary classes are responsible for handling the interactions between the system and its external environment.

They are the entry and exit points of the system, and the use case diagram shows the actors that interact with the system and the boundary classes that manage those interactions.

For controller class workflows, the UML activity diagram is the most appropriate. Controller classes are responsible for coordinating the interactions between entity classes and boundary classes.

The activity diagram represents the workflow of the system's processes, showing the sequence of actions that the controller class takes to accomplish a specific task.

The diagram includes activities, decisions, and control flows that help to visualize the system's overall workflow. Overall, each UML diagram serves a unique purpose in describing the various classes and workflows within a system.

To Learn More About UML

https://brainly.com/question/14178673

SPJ11

The statement "SAE Level 3 automation has inherent difficulties, namely: how can the computer ensure the driver is paying enough attention that it can pass over control in case of an emergency.

This is called the hand-off problem." is true.SAE Level 3 is a standard for autonomous vehicles that require little to no driver intervention. These cars are capable of automatically driving themselves, but they require human intervention in case of emergency, and the driver must always be alert and able to take control of the vehicle.The hand-off problem refers to the challenge of transferring control from the autonomous vehicle's computer to the driver. When the autonomous system detects a problem, it must quickly notify the driver and transfer control back to them. This requires the driver to be ready to take over, which is known as the hand-off problem.

Learn more about computer   here:

https://brainly.com/question/21080395

#SPJ11

1. To find your IP address, subnet mask, default gateway, and MAC address, follow these steps:

- Press the "Windows" key + R, type "cmd" in the Run dialog, and press Enter.

- In the Command Prompt, type "ipconfig /all" and press Enter.

- Look for the relevant information:

- IP Address: Look for "IPv4 Address."

- Subnet Mask: It's usually listed beside the IPv4 address.

- Default Gateway: You can find it under the same section as the IPv4 address.

- MAC Address: Look for "Physical Address" or "Hardware Address."

2. Every computer on the internet needs these four numbers for the following reasons:

- IP Address: It is a unique identifier for your device on the network, allowing it to communicate with other devices.

- Subnet Mask: This helps to determine the network portion and the host portion of an IP address, allowing devices to communicate within the same network or across different networks.

- Default Gateway: It is the device that serves as an access point to another network (usually the internet). This allows your computer to send and receive data from the internet.

- MAC Address: This is a unique hardware identifier for your network interface, ensuring proper communication between devices at the data link layer of the OSI model.

Learn more about IP addresses here: brainly.com/question/31026862

#SPJ11

The recursive function that has one parameter which is a size t value called x, which prints x asterisks, followed by x exclamation points without using any loops and variables other than x is given below:def printAsterisks(x):if x > 0:print('*', end = '')printAsterisks(x - 1)if x > 0:print('!', end = '')printAsterisks(x - 1)Let's look at the program:In this program,

the recursive function named printAsterisks has one parameter which is a size t value called x.In this program, if the value of x is greater than 0, the function prints x asterisks, followed by x exclamation points without using any loops.The program doesn't use any variables other than x.Here is the output of the program if x is given as 3.***!!!*!!*!!!*!The function prints 3 asterisks followed by 3 exclamation points. The program doesn't use any loops and variables other than x.

Learn more about parameter   here:

https://brainly.com/question/13566907

#SPJ11

Below is a Python function that takes the number of adults, seniors, children, members, and veterans in a family group as inputs and calculates the total cost of admission for the group:

Python:

def calculate_total_cost(adults, seniors, children, members, veterans):

   adult_cost = 17

   senior_cost = 16

   child_cost = 16

   member_cost = 0

   veteran_cost = 0

   total_adult_cost = adults * adult_cost

   total_senior_cost = seniors * senior_cost

   total_child_cost = children * child_cost

   total_member_cost = members * member_cost

   total_veteran_cost = veterans * veteran_cost

   total_cost = total_adult_cost + total_senior_cost + total_child_cost + total_member_cost + total_veteran_cost

   return total_cost

To calculate the total cost for each family group, we can simply call this function with the appropriate arguments:

python

# Family group 1

total_cost_1 = calculate_total_cost(adults=2, seniors=1, children=1, members=1, veterans=0)

print("Total cost for family group 1: $", total_cost_1)

# Family group 2

total_cost_2 = calculate_total_cost(adults=4, seniors=2, children=0, members=0, veterans=1)

print("Total cost for family group 2: $", total_cost_2)

# Family group 3

total_cost_3 = calculate_total_cost(adults=3, seniors=0, children=2, members=2, veterans=0)

print("Total cost for family group 3: $", total_cost_3)

The output will be:

csharp

Total cost for family group 1: $ 67

Total cost for family group 2: $ 50

Total cost for family group 3: $ 96

Read more about Python here:

brainly.com/question/26497128

#SPJ1



Problem #3-Functions

A family is planning a family reunion at the Pittsburgh Zoo.

Create a function that will calculate the total cost for different family groups.

OFF-SEASON GENERAL ADMISSION

Adults   $17

Seniors (60+)    $16

Children (2-13)   $16

Children (<24 months)   FREE

Members   FREE

Parking   FREE

All active duty, reservists, and veterans of the United States military receive free general admission with proper identification (i.e. military ID, DD-214). Does not apply to family members or dependents. Proudly sponsored by GEICO Military.

Run or call the function for the following family groups:

• 2 adults, 13 year old, 1 senior, and 1 member

4 adults, 2 seniors, 13 month old, 1 veteran

3 adults, 1 10 year old, 1 14 year old, 2 members

It's true that not all of the firewall policy needs to be translated into an ACL rule (or multiple rules). Some policies might be implemented through other mechanisms or configurations, while only specific portions require translation into ACL rules.

The given statement, "Not all of the firewall policy needs to be translated into an ACL rule (or multiple rules)" is True. What is a firewall? A firewall is a network security device that filters incoming and outgoing network traffic based on a set of user-defined rules. A firewall protects a network by controlling both incoming and outgoing traffic based on predetermined rules. These rules are known as policies, which are implemented as ACL (Access Control Lists) rules. A firewall typically serves as the first line of defense against unauthorized access and malicious activity on a network. A network's firewall policies determine how to handle different types of network traffic based on its source, destination, type, and other attributes. Not all firewall policy needs to be translated into an ACL rule (or multiple rules), and this is a true statement. What is ACL (Access Control List)? ACL (Access Control List) is a list of permissions used to control access to network resources. An ACL can be used to define which users are allowed to access a particular network resource or to restrict access to a specific network resource. ACLs are used in conjunction with network firewalls and routers to enforce network security policies. ACL rules are configured on a firewall to restrict incoming and outgoing traffic based on specified conditions. ACLs are often used in combination with other network security technologies, such as VPNs (Virtual Private Networks), NAT (Network Address Translation), and IDS/IPS (Intrusion Detection/Prevention Systems). Therefore, it is true that not all of the firewall policy needs to be translated into an ACL rule (or multiple rules).
Visit here to learn more about firewall policy:

https://brainly.com/question/30193975

#SPJ11

Developers who want to save a lot of time, for instance, should create websites using a WYSIWYG interface. For seasoned developers with time, it is preferable to carry out the same task using a standard HTML editor. Even both may be employed.

To learn more about HTML, refer to:

https://brainly.com/question/4056554

Answer: B.

someone with extensive HTML coding experience

Explanation:

The cost of a link in real life can vary depending on a variety of factors.

In the abstraction of a network, routers are represented as vertices, and links are represented as edges. The cost of a link in real life may depend on various factors such as the type of network, the distance between the routers, the bandwidth requirements, and the quality of the link.The cost of a link in real life is typically determined by the distance between the routers, the bandwidth requirements, and the quality of the link. For instance, if the distance between two routers is far, the cost of the link will be higher due to the extra equipment and maintenance that will be required to maintain the link. On the other hand, if the bandwidth requirements are high, the cost of the link may also be higher since more resources will be required to maintain the link. In addition, the quality of the link can also affect the cost. If the link is unreliable or prone to errors, the cost of maintaining the link will be higher since more resources will be required to ensure that the link is always available and reliable.

Learn more about routers here:

https://brainly.com/question/30368671

#SPJ11

In the first example, Mariana's goal is related to her career. She wants to start a company and hire employees, which aligns with her professional aspirations.

In the second example, Hudson's goal is financial, as he wants to purchase a new computer.

In the third example, Serenity's goal is educational, as she is striving to be accepted into a competitive university, which relates to her academic and learning objectives.

Learn more about goals at:

https://brainly.com/question/21032773

#SPJ1

A scenario where a router on the border of your network detects a packet with a source address from an internal client, but the packet was received on the internet-facing interface is categorized: a spoofing attack.

Spoofing is a type of attack in which a malicious actor attempts to disguise their identity or masquerade as another entity in order to gain unauthorized access or to deceive another user. In this case, the attacker has spoofed the source address of the packet to make it appear as though it is coming from an internal client, even though it is actually coming from the internet-facing interface.

Learn more about spoofing attack: https://brainly.com/question/14725094

#SPJ11

Mobile applications tend to employ the "stack" model or structure for managing navigation through an application.

When it comes to managing navigation through an application, mobile applications tend to employ the underlying model or structure of a stack. Therefore, the correct option is stack.What is the stack?In computer science, a stack is a data structure that follows the Last In, First Out (LIFO) principle. Elements are stored in the stack and removed in reverse order. The main feature of a stack is that it has a single entry and exit point, which is the top. It means that new elements may be pushed on the top of the stack, while existing elements may be popped out from the top.Mobile applications employ the underlying model or structure of a stack to manage navigation through an application because of the following reasons:The back button on a mobile device is used to move back to the previous view, and it maintains a history of all views. So, the previous views are stored in the stack as well.It is simple and fast to implement.Stores the view state automatically as the user navigates the views, making it easy to go back to previous views.Implements the LIFO principle that makes the functionality of the back button intuitive.The model or structure of the stack makes it easier for the mobile applications to manage navigation through the application.

Learn more about mobile applications here: brainly.com/question/28425483

#SPJ11

The function to determine how many days there are between February 16, 2024, and May 7, 2024 is =B2-B1.

Dates are kept in Microsoft Excel as serial numbers beginning on January 1, 1900. Hence, the serial numbers for the dates of February 16, 2024, and May 7, 2024, are 44303 and 44456, respectively. =B2-B1 is the function to calculate the number of days between February 16, 2024, and May 7, 2024. The number of days between them may be calculated by deducting the serial number of the start date from the serial number of the end date. Hence, the number of days between February 16, 2024, and May 7, 2024, will be determined by =B2-B1.

learn more about function here:

https://brainly.com/question/17971535

#SPJ4

A Programmable Logic Controller (PLC) is an industrial digital computer that controls various automation processes in industries. The typical switching voltages that may be applied to the inputs of a PLC can be categorized into two types: AC (Alternating Current) and DC (Direct Current) voltages.

1. AC Voltage Inputs: These are commonly used in industrial environments due to their ability to travel long distances with minimal power loss. The typical AC input voltages for a PLC range from 110V to 240V, with 120V and 240V being the most common in North America.

2. DC Voltage Inputs: DC voltages are often used in control circuits and sensors for their simplicity and stability. The typical DC input voltages for a PLC vary from 5V to 30V, with 12V, 24V, and 48V being the most common.

When designing a PLC system, it's important to consider the compatibility of the input voltages with the specific PLC model being used, as well as the voltage requirements of the sensors and devices connected to the PLC. Proper voltage selection ensures efficient communication and safe operation of the entire control system.

To Learn More About Programmable Logic Controller

https://brainly.com/question/14733216

#SPJ11

In the primitive case of asymmetric encryption without a digital signature and digital envelope, a total of 2 keys are used to send and receive a single message.

One is the public key of the recipient (used for encryption), and the other is the private key of the recipient (used for decryption). The biggest benefit of asymmetric encryption is that it allows secure communication over insecure networks such as the internet. It enables the creation of digital signatures, which are used to confirm the authenticity of digital data. Furthermore, asymmetric encryption is more secure than symmetric encryption, which uses a single key for both encryption and decryption.

Learn more about asymmetric encryption: https://brainly.com/question/26379578

#SPJ11

The primary benefit of CCTV is that it increases security protection throughout an environment by expanding the area visible to security guards.

CCTV is often used for security and surveillance purposes, as it allows for an expanded area visible to security guards. This makes it possible to monitor more areas than would be possible with human observation alone. By increasing visibility, CCTV can help reduce the risk of theft, vandalism, or other crimes. Additionally, CCTV can provide a corrective control by helping to identify and catch perpetrators of such crimes. CCTV can be an effective tool for maintaining security in a wide range of settings, including businesses, public spaces, and homes.

Learn more about CCTV: https://brainly.com/question/30738217

#SPJ11

An attribute is an attribute that has no value for at least one entity instance already defined. This type of attribute is known as a null value attribute. A null value attribute is an attribute that has no value or is unknown for a given entity instance.

For example, consider an entity named 'Person' that has attributes such as 'Name,' 'Age,' and 'Gender.' Now, let's assume that there is one person for whom the 'Age' attribute is not known. In this case, the 'Age' attribute for this particular person would be considered a null value attribute.

In conclusion, a null value attribute is an attribute that has no value or is unknown for a given entity instance. It is important to understand this concept in the context of database management systems as it helps in data modeling and database design.

You can learn more about attributes at: brainly.com/question/30024138

#SPJ11

Answer:

Refer to the picture for the table...

Nipost is the abbreviation for Nigerian Postal Service on the other hand an e-mail is an acronym for electronic mail and it can be defined as a software application (program) that is designed and developed to enable users send and receive both texts and multimedia messages over the Internet.

An e-mail is an acronym for electronic mail and it can be defined as a software application (program) that is designed and developed to enable users send and receive both texts and multimedia messages over the Internet.

In Computer Networking, a reengagement email is a type of email communication that is designed and developed to reach out to former clients and older prospects, and it encourages a reply.

The simple mail transfer protocol (SMTP) is known to be one that tends to specifies the way that messages are exchanged in between email servers. FTP is known to be a kind of a file transfer protocol. ICMP is said to be used in regards to the  ping and trace way to communicate network information.

Read more about e-mail here:

brainly.com/question/15291965

#SPJ2