The intake stroke of a positive displacement compressor is most similar to that of a
A. thermostatic expansion valve.
B. auxillary electric water pump.
C. one-stroke variable displacement compressor.
D. two-stroke cylinder engine.
Answer:
D. two-stroke cylinder engine.
Explanation:
Two-stroke cylinder engine: In chemistry, the term "two-stroke cylinder engine" is described as one of the types of "internal combustion engine" that tends to complete a single "power cycle" possessing two different strokes of the "piston" during a particular "crankshaft revolution".
It generally consists of two different strokes that are being often known as power or exhaust and suction stroke.
In the question above, the given statement signifies the "two-stroke cylinder engine".
Why does fumaric acid have a higher boiling point than maleic acid, even though they both can form hydrogen bonds?
Answer:.
Explanation:
Cuantos gramos de sulfato de plomo (II) se requieren para preparar 200mL una solución de esta sal a una concentración de 100 ppm. Si se toma una muestra de 30 mL de la disolución anterior y se diluye en 1000 mL de agua, ¿cuál es la concentración de la disolución?
Answer:
0.020g de sulfato de plomo se requieren
La concentración de la solución diluida es de 3ppm
Explanation:
Las partes por millón (ppm) son definidas como:
miligramos soluto / 1L solución.
Si deseas preparar una solución a 100ppm de sulfato de plomo (II) necesitas 100mg de este sulfato en 1L. En 200mL = 0.200L vas a necesitar:
0.200L × (100mg / 1L) = 20mg de sulfato de plomo (II).
Como 1000mg = 1g,
20mg × (1g / 1000mg) = 0.020g de sulfato de plomo se requieren.
Ahora, se van a tomar 30mL de esta solución y se diluirán a 1000mL. Se diluye la solución:
1000mL / 30mL = 33.33 veces.
Como la solución inicial es de 100ppm, esta dilución genera una solución de concentración:
100ppm / 33.33 = 3ppm
Which of these elements have the smallest 1st ionization energy
Answer:
Ionization energy increases as you go across a period, and increases as you move up a group. So, elements with the smallest ionization energy would be at the bottom left corner of the periodic table. Examples of elements with small ionization energy: Francium (Fr), Cesium (Cs), Radium (Ra).
What's the meaning of love?
Answer: Love is when you feel like you can touch the sky when your around that person, when your at your best self or that person and when you put their needs before yours because your needs just don't matter. When you feel like you can't stop thinking about that person or you can stop smiling when you think of them. Its when you feel this warm, safe feeling when your around them. And if you really love them then my answer should be true for you.
Explanation:
because iv'e felt and have been in love before....
Answer:
Love is an intense, deep affection for another person. Love also means to feel this intense affection for someone. Love can also refer to a strong like for something or to like something a lot. Love has many other senses both as a verb and a noun
Water is a compound not a mixture. Justify this statement by giving two reasons.
Answer:
Water is a compound and not a mixture. The reasons are the following:
1) It is held tightly through bonds called chemical bonds which is the characteristic of compound and not mixture.
2) It cannot be separated by physical means but can be separated by chemical means.
Answer:
⇒ Water is formed from a chemical bond, the molecule cannot be separated physically. Water can be separated into hydrogen and oxygen by a chemical reaction.
⇒ Compounds are made up of different elements. Water is made up of hydrogen and oxygen, which are two different elements. Hydrogen and oxygen form a compound known as water.
(c) He, Na, Mg (increasing order of melting point).
Answer:
Helium has melting point of - 272.2°C or - 458°F
Sodium (Na) = 650°C. or 208°C
Magnesium (Mg) = 97.79°C. Or 1202°F
Explanation:
what is difference between vapourization and boiling point?
Answer:
Vaporization is basically just evaporation which does not require nearly as much heat and happens naturally however when it comes to boiling point this is the point where water has been heated enough to start bubbling and changing state slowly.
Explanation:
Consider a pure crystalline solid that is heated from absolute zero to a temperature above the boiling point of the liquid. Which of the following processes produces the greatest increase in the entropy of the substance?
a) melting the solid
b) heating the liquid
c) heating the gas
d) heating the solid
The question is incomplete, the complete question is;
Consider a pure crystalline solid that is heated from absolute zero to a temperature above the boiling point of the liquid. Which of the following processes produces the greatest increase in the entropy of the substance? A ) melting the solid B ) heating the gas C ) vaporizing the liquid D ) heating the solid E ) heating the liquid
Answer:
vaporizing the liquid
Explanation:
We generally define entropy in chemistry as the degree of disorderliness in a system. The entropy of gases is greater than that of liquids and the entropy of liquids is greater than that of solids. It then logically follows that the degree of entropy in gases is the greatest among all the states of matter while the entropy of solids is the least among all the states of matter since solid particles remain in their mean positions and can only vibrate or sometimes rotate. Liquid particles may translate while gaseous particles move at high velocity with negligible intermolecular forces of attraction between them.
A phase transition from liquid to gaseous state now represents the greatest change in the entropy of the system since gases posses the highest entropy among all the states of matter, hence the answer.
The ability of a material to burn (its flammability) is an indication of the materials reactivity with oxygen. Does the information you found about flammability agree with the general trend that noble gases are fairly unreactive? Explain your answer
Answer:
Yes, this theory supports the inert nature of noble gases.
Explanation:
Noble gases already attain octet state stability, by having their outer shells completely filled with electrons. This makes them unable to take part in chemical reaction (by lose, gain or sharing of electrons).
Flammability occurs when matter burns through combination with oxygen, and changes to a different substance.
I hope this explanation is clear, let me know if I can be of further assistance.
what is a conjugate acid
THE conjugate acid, within the acid–base theory, is a chemical compound formed by the reception of a proton by a base—in other words, it is a base with a hydrogen ion added to it, as in the reverse reaction it loses a hydrogen ION.
Which formula contains a metal and a nonmetal? SO2 MgO CO H2O
Answer:
MgO
Explanation:
Mg, which is magnesium, is considered a metal, when paired with Oxygen, which is a gas, it creates magnesium oxide, and the formula itself is a pairing of a metal with a nonmetal
Answer:
[tex]\boxed{MgO}[/tex]
Explanation:
Metals are red, nonmetals are blue, and metalloids are yellow in the attached file.
Using this table, you can see that Mg is a metal and O is a nonmetal, which fits the question criteria.
Hope this helps!
Acetic acid only partially ionizes in water. A solution contains a large quantity of acetic acid dissolved in water. How can this acid solution best be described?
Answer:
The acid solution is a concentrated solution.
Explanation:
Acetic acid is a weak acid, because it ionizes partially in water as shown below:
CH3COOH + H2O —> H3O+ + CH3COO-
A solution containing a larger quantity of acetic acid is termed concentrated solution.
This is so because a concentrated solution is a solution that contains more of the solute than the solvent.
A solute is the substance which dissolves in the solvent.
A solvent is the substance which dissolves a solute.
In this case, acetic acid is the solute and water is the solvent.
Solution is simply the combination of solute and solvent
Solution => Solute + Solvent
More solute + Less solvent => Concentrated solution
Therefore, a solution containing a higher quantity of acetic acid ( i.e the solute) in water (i.e the solvent) is called a concentrated solution.
Explain this
When a small piece of glowing sodium is placed inside a gas jar filled with chlorine gas, the sodium continues to burn brightly but when the gas is replaced by argon gas, the glowing sodium becomes extinguished.
Answer:
Because Argon is a inert gas
Explanation:
Inert gases don't take place in any experiments
Answer:
Below.
Explanation:
The sodium reacts strongly with the chlorine to form NaCl and the heat of reaction continues the brightness, whereas it does not react with the inert gas argon and soon cools down.
describe the smell of Na+ and H+
Answer:
Sodium ion ( Na+) is known to have no smell at all but however appears salty which is the reason why the compound Sodium Chloride has the same type of taste.
Hydrogen ions ( H+) are known to have no taste which implies it being tasteless. It is also important to note that it has no smell too when perceived (odorless).
How are the elements arranged in the modern periodic table?
O A. According to atomic number
B. According to atomic mass
C. According to the number of neutrons
O D. According to the number of electrons
Answer:
A
Explanation:
Favorable adaptations build up in a population over many generations due to long-term environmental change. What is the most likely result of this process?
Answer:
The most likely result of this change is the mutation and modification of body parts, properties, and functions to accommodate this change.
Explanation:
When there is a long-term change in an environment, animals develop favorable adaptation over generations to cope with this change. The most likely result of this change is the mutation and modification of body parts, properties, and functions to accommodate this change. A favorable adaptation will lead to the population thriving in this environment even if others die out due to their inability to adapt to these environment. An example is the peppered moth whose black variant now exceeds its white variant due to its ability to blend well unseen on the bark of a pollution darkened tree. The adaptation was necessary to cope with the change in their habitat caused by industrialization.
Answer:
B - speciation
Explanation:
on edge plz mark brainest
name all the period 2 elements in mendeleevs periodic table
Answer:
beryllium, magnesium, calcium, strontium, barium, radium
Explanation:
glad to help
I'm a scientist working on a very high-class operation in a classified area, we experienced some very strange encounters with the people we test on, like trying to bite us,attack us causing harm i think we discovered something.
Answer:
The most important first realization is to find out if the patients are deceased and their bodies are acting under an outside volition such as a virus reanimating the body through the use of the brain stem. If they are still living then they are what would be called infected if dead they are the undead naturally enough. Keep them contained as best you can but knowing scientists they will get free. When facing an infected they can die to any injuries that a normal human can they just won't react to pain so don't shoot for the head blast that thing in the chest then hit it in the head while it's down. Forget hand to hand combat or most close-ranged weapons unless absolutely necessary because close contact means exposure to fluids from the zombie they don't have to bite you to turn you. There is so much more to be said about this I recommend picking up the ZAS zombie survival book I recently got it and have not yet finished it but have learned a great deal.
Explanation:
Yes I fully understand this is not real and I simply felt like answering in a detailed manner for fun and that book is a serious recommendation.
Answer:
The most significant first acknowledgment is to see whether the patients are expired and their bodies are acting under an outside volition, for example, an infection vivifying the body using the cerebrum stem. On the off chance that they are as yet living, at that point they are what might be called tainted if dead they are the undead normally enough. Keep them contained as well as can be expected however knowing researchers they will get free. When confronting a tainted they can bite the dust to any wounds that an ordinary human can they just won't respond to torment so don't go for the head shoot that thing in the chest at that point hit it in the head while it's down. Disregard hand to hand battle or most close-extended weapons except if completely fundamental since close contact implies introduction to liquids from the zombie they don't need to nibble you to turn you. There is quite a lot more to be said about this I suggest getting the ZAS zombie endurance book I as of late got it and have not yet completed it yet have taken in a lot.
Explanation:
sodium react gently with water ture or false
false,
sodium has a vigorous reaction with water.
This can be observed by putting a piece of sodium in water,
it moves swiftly across the surface of water and reacts violently.
For the α anomer of a D-sugar, the anomeric hydroxyl in a Haworth projection Group of answer choices has an upward projection (on the same side as the terminal CH2OH group). has a downward projection (on the opposite side from the terminal CH2OH group).
Answer:
The answer is "choice 2".
Explanation:
Its glycosidic fruit juice facility would be a chromosomal hydrogen bond and an aldehyde (or acetone) team generated from the intramolecular creation of the acetals (or ketal).
Its two heterocycles created at the anomeric core from of the 2 potential stereochemical are named anomers, that's why choice "has a downward projection (from terminal CH2OH party on the opposite side)" is correct.
what is an electrolyte? the fastest answer will get bainliest.
Answer:
Electrolytes are substances which undergo chemical change when electricity is passed through them.
Which of the following choices would have a negative entropy change? A. CaCO3(s)−>CaO(s)+CO2(g)
Answer: N2(g) + 3H2(g)- >2NH3(g) denotes a negative entropy change.
Explanation:
Entropy is defined as the extent of disorder in a system. The degree of entropy is more in a gas and less in a solid.
Here, 1st reaction produces ammonia from nitrogen and hydrogen. We can see that four moles of gases produces 2 moles of gaseous product. So the degree of disorder in the system is decreasing. So the entropy is also decreasing.
Which statement is true with respect to the investigation? The student investigated only the physical properties of lead. The student investigated only the chemical properties of lead. The student investigated more physical properties than chemical properties of lead. The student investigated more chemical properties than physical properties of lead.
The question is incomplete, the complete question is;
A student investigated some properties of lead and recorded the findings in the table below. Property Observation Color Dull gray Density 11.3 g/cm3 Volume of sample 3 cm3 Melting point 327°C Reaction with air Lead oxide forms on the surface Electrical conductivity Conducts some electricity Which statement is true with respect to the investigation?
A. The student investigated only the physical properties of lead.
B. The student investigated only the chemical properties of lead.
C. The student investigated more physical properties than chemical properties of lead.
D. The student investigated more chemical properties than physical properties of lead.
Answer:
The student investigated more physical properties than chemical properties of lead.
Explanation:
If we look at the things mentioned in the question as regards the approach of the student towards the study of lead, we will discover that he/studied;
Colour, density, volume, melting point and electrical conductivity which are all physical properties. Physical properties of a substance does not involve chemical reactions of the substance under study.
The only chemical property studied by the student is its formation of an oxide- lead oxide with air as follows;
2Pb(s) + O₂(g) → 2PbO(s)
Thus we can safely conclude that; the student investigated more physical properties than chemical properties of lead.
Answer:
c
Explanation:
edge 2021 :)
the outermost shell of an atom in known as ??
Answer:
The answer is valance shell.
Valance shell is the outermost shell of an atom which contains valance electrons on it of an atom of an elements.
Hope it helps....
What are the ways in which quality of petrol can be improved?
Answer:
It can be improved by:
a) Adding METHANOL
b) Adding BUTANOL
c) Adding ETHANOL.
Explanation:
hope it helps.
which materials are included in the hydrosphere that are not in liquid form A. ice caps B. lakes and rivers C. rainforest and lakes D. rocks and minerals
Answer:
The correct answer is option A, that is, ice caps.
Explanation:
The part of the planet Earth covered by water or ice is known as the hydrosphere. It comprises lakes, oceans, rivers, polar ice caps, and glaciers. The polar ice caps and glaciers are the only elements of solid found in the hydrosphere.
The other options, that is, lakes and rivers are also a part of hydrosphere but they are in liquid form. While rainforest and rocks and minerals are the parts of the lithosphere, not hydrosphere.
Answer:
A. Ice Caps
Explanation:
I Got It RIght On The Test
A roller coasters velocity at the top of a hill is 21mls. Two seconds later it reaches the bottom of the hill with a velocity of 36mls. What is the acceleration of the roller coasters
Answer:
7.5 m/s²
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 21 m/s
Final velocity (v) = 36 m/s
Time (t) = 2 secs
Acceleration (a) =..?
The acceleration of an object is simply defined as the rate of change of velocity of the object with time. Mathematically, it is represented as:
Acceleration (a) = (final velocity (v) – initial velocity (u)) / time (t)
a = (v – u)/t
With the above formula, we can determine the acceleration of the roller coaster as follow:
a = (v – u)/t
a = (36 – 21)/2
a = 15/2
a = 7.5 m/s²
Therefore, the acceleration of the roller coaster is 7.5 m/s².
Below are 5 sets of potential solutes for you to compare. Both members of each pair are very soluble in water. If you had equal molar concentrations of each solution, which member of each pair would theoretically be the better conductor of electricity?
A. CsCl, CaCl2.
B. CaS, Li2S.
C. KBr, AlCl3.
D. AlCl3, MgC2.
E. KI, K2S.
Answer:
Option D. AlCl₃, MgC₂
Explanation:
We need to dissociate all the salts, to determine the i. (Van't Hoff factor).
The salt who has the highest value, will be the better conductor of electricity
CsCl → Cs⁺ + Cl⁻ i = 2
CaCl → Ca²⁺ + Cl⁻ i = 2
CaS → Ca²⁺ + S⁻² i = 2
Li₂S → 2Li⁺ + S⁻² i = 3
KBr → K⁺ + Br⁻ i = 2
AlCl₃ → Al³⁺ + 3Cl⁻ i = 4
MgC₂ → Mg²⁺ + 2C⁻ i = 3
KI → K⁺ + I⁻ i = 2
K₂S → 2K⁺ + S⁻² i = 3
The biggest i, is in pair D.
Answer:
Look at the Screenshot!!!
Explanation:
Got it right on Odessyware ;) Have a nice day!!!!!
Consider the hydrocarbon below. 2 carbons are double-bonded to each other; the pair are single bonded to H above left, above right, below right, and below left. What is the name of this hydrocarbon?
Answer:
Ethene.
Explanation:
To know the name of the compound given above, we must:
1. Determine the number of carbon present in the compound.
2. Determine whether a single, double or triple is present in the compound.
3. Combine the above to get the name.
Now, let us name compound given above. This is illustrated below:
1. The compound contains two (2) carbon atom.
2. The compound contains a double bond. Therefore, the compound is an alkene.
3. An alkene with two carbon atoms is called ethene.
Therefore, the name of the compound given in the question is called ethene.
Answer:
other guy is right :)
Explanation:
if you look up "ethene hydrocarbon" online, the image attached in the question pops up!