During which two moon phases would the amount of light reflected from the moon appear to be equal from Earth? Why does this occur at different times in a month? (AKS6a, DOK 3)

A.
The light reflected appears the same during the new moon and full moon phases because the sun, moon and Earth are aligned.

B.
The light reflected appears the same during the new moon and first quarter moon phases because the sun, moon and Earth are at the same angles.

C.
The light reflected appears the same during the full moon and third quarter moon phases because the sun, moon and Earth are at the same angles.

D.
The light reflected during the first quarter and third quarter moon phases appears equal because the sun, moon and Earth are at right angles.

Answers

Answer 1

The moon phase shows that D. light reflected during the first quarter and third quarter moon phases appears equal because the sun, moon and Earth are at right angles.

What is a moon phase?

It should be noted that the moon phase simply means the portion of the moon that we can see from the Earth.

In this case, the light reflected during the first quarter and third quarter moon phases appears equal because the sun, moon and Earth are at right angles.

Learn more about moon on:

https://brainly.com/question/398659


Related Questions

Second and third class levers are differentiated by __________. a. the location of the fulcrum b. the location of the load c. the presence of multiple loads d. the type of fulcrum present please select the best answer from the choices provided. a b c d

Answers

Answer:

Its B

Explanation:

Its B because i said its B alright cool bet

Second and third class levers are differentiated by the location of the load. The correct option is b.

The position of the weight in relation to the fulcrum distinguishes second-class levers from third-class levers.

The load is situated in a second-class lever halfway between the fulcrum and the applied force. The effort is placed between the fulcrum and the load in a third-class lever.

The mechanical advantage and the way these levers magnify force or motion depend on where the load is placed in relation to the fulcrum.

Thus, the correct option is b.

For more details regarding lever, visit:

https://brainly.com/question/31378631

#SPJ7

A lamp is marked 24V, 100W. Describe an experiment to check that the electrical power supplied to the lamp is 100W when the p.d. across it is 24V.
In your account you should
* include a circuit diagram,
* state the readings that are taken,
* show how the result is calculated from the readings.​

Answers

The electrical power supplied to the lamp is 100W when the p.d. across it is 24V and the current is 4.2 A.

What is electrical power?

Electrical power is the rate at which electrical work is done.

The unit of electrical power is Watts.

Power = Current × Voltage

The experiment will require a 24V Battery, a Lamp marked 24V, 100 W, a key, wires, a rheostat, a voltmeter and an ammeter.

The circuit is completed and the rheostat is adjusted to provide until the voltmeter reads 24V.

The ammeter reading is taken as well.

When the voltmeter reading is 24V, it can be seen that' the ammeter reading for current is approximately 4.2 A.

Calculating, the power of the lamp:

Power = 24 × 4.2 = 100 W

Therefore, the electrical power supplied to the lamp is 100W when the p.d. across it is 24V and the current is 4.2 A.

Learn more about power and p.d. at: https://brainly.in/question/13629965

Suppose that a college physics experiment goes horribly wrong and releases an electronic pulse that renders all electronic equipment in the cities of columbus, cleveland and cincinnati, ohio permanently useless. No people are hurt, and no buildings are damaged. After the accident, the wages earned by ohio workers will.

Answers

Answer:

It will decrease because the marginal productivities of workers will decrease.  Diminishing marginal product occurs when the marginal product of an input goes down as the quantity of the input goes up.  The transformation in product resulting from employing one more unit of a particular input for instance, the change in output when a firm's labor is mark up from five to six units, assuming that the mass of other product are kept constant  is called The input of marginal product or marginal physical product.

Explanation:

The maximum distance particles of the medium move when a wave passes through them is wave.

Answers

Answer:

amplitude

Explanation:

Two charges with a certain distance apart have an electrostatic force of 400 N acting
between them. If the same charges are separated to 4 times their original distance, what
will the new electrostatic force be between them?
A. 100 N
C. 50 N
E. 1600 N
B. 25 N
D. 400 N

Answers

As the charges’ distance increase, there is a weaker force of attraction between them hence the electrostatic force decreases as distance increases. It increase by 4 (times 4) so the force will decrease by 4 making the answer

=A (400 divided by 4 = 100)

A –0.06 c charge is placed is in a uniform electric field with a strength of 200 n/c. what is the magnitude and direction of the force on the charge? 12 n in the opposite direction of the field 12 n in the same direction of the field 3333 n up in the opposite direction of the field 3333 n in the same direction of the field

Answers

The magnitude of the charge is 12 N  in the opposite direction of the field.

What is Electric field?

The term electric field refers to the region in space where the effect of a charge is felt. In this case, we are told that the magnitude of the charge is  –0.06 C.

Hence;

E = F/q

F = Eq

F = –0.06 C * 200 N/C

F = 12 N

Hence, the magnitude of the charge is 12 N  in the opposite direction of the field.

Learn more about electric field: https://brainly.com/question/15800304

#SPJ4

Answer:

A

Explanation:

Edge

In which direction is there a net force of 200 N?

Coordinate plane with top and bottom of x axis labeled 300 N and left side of y axis labeled 200 N and right side labeled 400 N with a point marked closer left of center

Question 2 options:

left


right


up


down

Answers

Answer:

right    

Explanation:

The up and down forces cancel

  then you are left with a    -200    and a  + 400

     resulting in a + 200   (to the right)

3. Give an example of a mechanical wave that changes frequency.​

Answers

Answer:

No , impossible

Explanation:

Mechanical waves are those waves which requires a medium to travel through. for example sound ,if you put a speaker inside vaccum you can't hear it .As they changes their medium their wavelength is changed but frequency remains same

What property of matter is most responsible for the fact that sound travels at different speeds through different materials?.

Answers

Answer:

density

Explanation:

higher density ===> higher propagation speed

What is the current of the ammeter?

Answers

Answer:

.6 A

Explanation:

V = IR

V/R = I

12/20 = I = .6 A

Answer:

a) 0.60 A

Explanation:

Given that,

→ Potential difference (V) = 12 V

→ Resistance (R) = 20 Ω

→ Current (I) = ?

Formula we use,

→ I = V/R

Let's solve the problem,

→ I = V/R

→ I = 12/20

→ [ I = 0.60 ]

Hence, option (a) is the answer.

Fuses protect electrical devices by opening a circuit if the current in the circuit is too high. Would a fuse work successfully if it were connected in parallel with the device that it is supposed to protect

Answers

A fuse is placed in parallel with the device it is supposed to protect will not work successfully.

Meaning of a fuse and how it works

A fuse is an electrical and electronics device that protects a system from excess current. it breaks to deter the flow of current into a device.

The work of a fuse is important to every electrical circuit and device.

A fuse is always in series with the device its to protect, so it can easily break of and by so doing current will not flow to the device again.

In conclusion if a fuse is placed in parallel with the device it is supposed to protect, it will not work successfully.

Learn more about Fuse : https://brainly.com/question/1298425

#SPJ1

A metal block has a mass of 5 grams and a volume of 1 cm3. What is the density of a piece of the same identical metal but with a different shape and different volume

Answers

Answer:

ρ = Mass / Volume     definition of density

ρ  = 5 g / 1cm^3 = 5 g / cm^3

Since the other object is made of the same metal its density is the same:

ρ = 5 g/cm^3

The density of a piece of the same identical metal but with a different shape and different volume is [tex]\rho = 5 g/cm^3[/tex].

What is density?

The density of a substance is its mass per unit volume. Density gives information about how tightly the substance is packed together. The formula for density is

[tex]\rho ={\frac {m}{V}}[/tex]

Unit of density is grams per cubic centimetre.

What are uses of density?One of the most common uses of density is in how different materials interact when mixed together.Wood floats on water because it has a lower density than water, while an anchor sinks as the metal has high density.Balloons filled with helium gas float because the density of the helium is low than the density of air.

Given:

Mass, [tex]m = 5 g[/tex]

Volume, [tex]V = 1 cm^{3}[/tex]

The density of metal is

[tex]\rho = \frac{5}{1}\\ \\\rho = 5 g/cm^{3}[/tex]

Since, the other object is made of the same metal. So, density is the same.

[tex]\rho = 5 g/cm^3[/tex]

To learn more about Density here

https://brainly.com/question/15164682

#SPJ2

2. Three identical lamps are connected in
series with each other. If the resistance
of each lamp is X ohms, what is the
equivalent resistance of this series
combination?
(1) ΧΩ
(3) 3X22
(2) 2
2
(4) 2
w/
X

Answers

The equivalent resistance of the series combination is :  3XΩ

Determine the Equivalent Resistance

Equivalent Resistance is the total resistance in circuit (i.e parallel or series circuits).

Bulb in series have the same resistance. Therefore each Bulb has a resistance of XΩ

equivalent resistance = [tex]R_{1}[/tex] + [tex]R_{2}[/tex] + [tex]R_{3}[/tex]

Let [tex]R_{1}[/tex] represent resistance of bulb one

[tex]R_{2}[/tex] represent resistance of bulb two

  [tex]R_{3}[/tex] represent resistance of bulb three

equivalent resistance = X + X + X

equivalent resistance = 3XΩ

In conclusion, the equivalent resistance of the series combination of Three identical lamps connected in series with each other with a resistance of  X ohms each is 3XΩ

Learn more about Resistance: brainly.com/question/1851624

one particular descent goes from 2100m to 1600m. Assuming work done against friction is 90% of the potential energy change of the cyclist and the cycle, what increase in speed in Km/h can a rider attain by the end of the
descent?

Answers

Answer:

1/2 M V^2 = .1 M g H       where 10% of PE goes into KE

V^2 = .2 g H = .2 * 9.8 * (2100 - 1600) = 980 m^2 / s^2

V = 31.1 m/s       increase in speed during descent

1 km / hr = 1000 m / 3600 sec = .278 m/s

V = 31.1 m/s / (.278 m/s / km /hr)= 112 km/hr

A twin-sized air mattress used for camping has dimensions of 100 cm by 200 cm by 15 cm when blown up. The weight of the mattress is 2 kg. How heavy a person could the air mattress hold if it is placed in freshwater

Answers

For a twin-sized air mattress used for camping has dimensions of 100 cm by 200 cm by 15 cm when blown up, the weight is mathematically given as

M=2923.38N

What is the weight of a person could the air mattress hold if it is placed in freshwater?

Generally, the equation for the maximum mass   is mathematically given as

M=Vp-m

Therefore

M=100*200*15(1*10^3)-2kg

M=298kg

In conclusion,  the weight

W=298kg*9.81

W=2923.38N

Read more about mass

https://brainly.com/question/15959704

#SPJ1

The slope of a speed-time linear graph is NOT_____.


acceleration

direction

Answers

Answer:

direction

Explanation:

the slope of a velocity time graph is the acceleration

Two coils connected in series have a resistance of 36 ohm and when connected in parallel have a resistance of 8ohm. Find resistance of each coil​

Answers

Answer:

Explanation:

Remark

Two resistances in series has the form of

Rs= C1 + C2

Two resistances is parallel has the form of

Rp = (C1 *C2)/(C1 + C2)

The plan is to first of all find C1*C2 and use this information and C1 + C2 to find the individual resistances.

Givens

Rs = 36 ohms

Rp = 8 ohms

Solution

Rp = C1 * C2/(C1 + C2)

Rp = 8 ohms

C1 + C2 = 36 ohms

8 =    C1*C2 / 36                          Multiply by 36

8* 36 = C1*C2

C1*C2 = 288

Use Rs to solve for C1

C1 + C2 = 36C1 = 36 - C2

(36 - C2) * C2 = 288

36*C2 - C2^2 =288                    Multiply by - 1

-36C2 + C2^2 = -288                 Add 288 to both sides

C2^2 - 36C2 + 288= 0               Factor this equation

(C2 - 12)(C2 - 24)

C2 - 12 = 0

C2 = 12

C2 - 24 = 0

C2 = 24

C2 = 24 or

C2 = 12

C1 = 36 - C2

C1 = 36 - 24 = 12

C1 = 36 - 12  = 24

Answer

C1 = 12 ohms or 24 ohms

C2 = 24 ohms or 12 ohms

_____ is a device
which increases or decreases voltage.
Iron
core
Electricity Primary
Coil
(input)
Secondary Electricity
Coil
in
out
(output)
100 V
10 A
1000 W
static charge
charges
transformer
force field
Primary
55 turns
Secondary
20 turns
Core
400 V
2.5 A
1000 W

Answers

Answer:

transformers

Explanation:

A transformer is a device that increases or decreases voltage.

What would decrease the efficiency of this truck?


A. Keep the truck well-oiled.

B. Change the oil frequency.

C. Take off the brake pads.

Please help!!

Answers

Answer: The answer isC .

Explanation:

The answer is C.

Keeping the truck well oiled increases it.

Changing the oil frequency depends on the truck and oil but still doing it increased and helps the truck.

Taking off the breaks pads would decrease the truck, based on how the answer options is written the answer is C because your not changing them but taking them off.
HOPE THIS HELPS!!!

An ant is crawling up a leaf that is hangin vertically. it lifts 0:007 kg crumb up 0:12 meters. to do this, the ant exerts 0.069 newtons of force. how much work dis the ant do on the crumb?

Answers

Answer:

.000828 j

Explanation:

Work = F * d

          .0069 N * .12 m = .000828 j

Continuing from the other question

Answers

Answer:

iv)Salt

III) Ethanol

Hopefully this helps you all the best.Help me out by giving me a like

What is an object’s acceleration if it is moving at 40 m/s and comes to a stop in 5 s?


35 m/s 2

8 m/s 2

–8 m/s 2

200 m/s2

Answers

Answer:

- 8 m/s^2

Explanation:

given:

Final velocity = 0

initial velocity = 40

time = 5 seconds

we can use the equation vf = vi + at

hence,

0 = 40 + 5a

-40 = 5a

a = -8 m/s^2

what elements of the company's performance should be used to help make that decision

Answers

The key elements of better decision making can help you rationalize problem, set boundaries around the solution, identify the right thing to do, identify the actions, and get feedback.

When a rifle fires, a sequence of events takes place. After the firing pin strikes the primer, what is the next event in the sequence?.

Answers

Answer:

what the freak

Explanation:

the kinetic energy of the whatever hit the bullet is transferred to enabling it to accelerate thus attaining a velocity with which it moves out of the barrel of the gun but some of the kinetic energy is lost in form of sound and heat energy and the bullet travels out the barrel to the target

Marcus is looking at the field that surrounds a charged object. Which field is he looking at?
1. Proton field
2. Electric field
3. Magnetic field
4. Gravitational field

Answers

Answer:

I believe it's the electric field.

Explanation:

Collisions between galaxies are rare and have little or no effect on the stars and interstellar gas in the galaxies involved. true or false

Answers

Answer:

false

Explanation:

How will you describe the horizontal and vertical motions of a projectile?​

Answers

The horizontal motion of the projectile is the result of the tendency of any object in motion to remain in motion at constant velocity. The vertical motion of a projectile is controlled by the force of gravity.
Hope this helps!
Please give Brainliest!

A person on a bicycle travels a distance of 12.5 km in 2.1 hrs, what was the speed of the person on the bicycle?

Answers

Answer:

5.9 km/hour

Explanation:

divide 12.5 by 2.1 and the answer is 5.9

When we say charge is conserved, we mainly mean that charge can be _________. View Available Hint(s)for Part A constant in all bodies transferred without loss like money in a bank created and destroyed in equal amounts saved, like money in a bank

Answers

Answer:

neither created nor destroyed.

Explanation:

How does the atmospheric temperature and size of inner planets compare with those of outer planets?

Answers

The inner planets are rocky and have diameters of less than 13,000 kilometers. The outer planets include Jupiter, Saturn, Uranus, and Neptune. The smaller, inner planets include Mercury, Venus, Earth, and Mars. Inner planet's atmosphere is thin. (Mercury has no atmosphere). Outer Planets: Outer planets' atmosphere is very thick. The four inner planets, Mercury, Venus, Earth, and Mars, are warmer than the outer gas giants. However, the temperature of the planets does not follow a linear path from the Sun.

Hope this helps!
Please give Brainliest!
Other Questions
The woman pushes on the door. If her force is the action force, which of these describes the reaction force?A. The door pushes back on her handB. The door pushes forwardC. The door pushes against the wallD. The door is pulled downward by gravity Please answer this Im struggling rn :( most major organs receive blood from the branches of the aortic vein true or false The Asian long-homed beetle can infect a variety of tress such as maple trees and elm trees. These beetles eat the inside of aninfected tree and destroy the pathways that water and nutrients travel through to get from the roots to the rest of the tree. This resultsin the tree becoming sick and eventually dying.A cargo ship canying Asian long-homed beetles introduces the species into a region where the beetles were not previously presentThis region has a diverse population of maple and elm trees. How will humans in the area likely be impacted?OA. The housing industry will be negatively impacted due to an increase in lumber costs.OB. The maple syrup industry will be negatively impacted due to a decrease in the maple populationOC. The lumber industry will be negatively impacted due to a decrease in available resources.OD. all of HURRY Why do you think scientists use all three kinds of evidence (embryonic, anatomic, and genetic) to determine relationships between organisms to see if ducks and platypus are related. What is the length of side PQ in this figure? Please help me with this :)))))If .divide the problem. Measuring the height of a tree is usually more difficult than measuring the diameter of the tree. Therefore, many researchers use regression models to predict the height of a tree from its diameter measured at 4 feet 6 inches from the ground. The following computer output shows the results of a linear regression based on the heights, in feet, and the diameters, in inches, recorded from 31 felled trees. Estimate Std Error t-value Pr(>|t|)Intercept 62. 031 4. 383 14. 15 0. 0000Diameter 1. 054 0. 322 0. 2028 3. 27Required:What is a 95 percent confidence interval for the slope of the population regression line? The math test scores of Mrs. Hunter's class are shown below. 48, 56, 68, 72, 72, 78, 78, 80, 82, 84, 88, 88, 88, 90, 94, 98, 100 What is the mode of the data? The difference between values or shades to emphasize an area of an artwork. Question 2 options: color contrast balance movement NEED HELP PLEASE SINE/COSIGN LAW QUESTION RIGHT THE ANSWER OUT ON A PIECE OF PAPER AND SEND IT IF YOU HAVE TO MAKE SURE ITS CLEAR AND CORRECT. 45 points + brainliest When discussing solutions, the amount of solute dissolved in the solvent is important to knowas it will affect the Colligative Properties of that solution. A solution prepared by dissolvingthe maximum amount of solute in a given amount of solvent is BEST described as:A) a supersaturated solution.B) a saturated solution.C) an unsaturated solutionD) a dilute solution. Which functions graph is shown below? What is 18.5% of 500?9.2592.59250.925 Which of the following examples wouldNOT experience the "Law of IncreasingOpportunity Costs?"A. The production of shipsand production of semi trucksby the same company.B. The production of light bulbs and production of dogfood by the same company.C. The production of tables and production of chairs bythe same company. Prosificacion del poema de la culpa de Jos ngel Buesa If the measure of angle 1 is (3 x minus 4) degrees and the measure of angle 2 is (4 x + 10) degrees, what is the measure of angle 2 in degrees? What former country, taken as part of a bargain between Stalin and Hitler in the Non-Aggression Pact at the beginning of World War II, became a Soviet Satellite state afterthe war? I WILL GIVE 20 POINTS TO THOSE WHO ANSWER THIS QUESTION RIGHT NOOOO SCAMS AND EXPLAIN WHY THAT IS THE ANSWER