The new speed of the system when the ball is caught is approximately 0.025 m/s
To solve this problem, we will use the conservation of momentum equation:
MaVa + MbVb = (Ma + Mb)(Va+b)
where Ma is the mass of the football (0.257 kg), Va is the velocity of the football (9.76 m/s), Mb is the mass of the receiver and hovercraft (98.6 kg), and Vb is the initial velocity of the receiver and hovercraft (0 m/s, since it is stationary).
0.257 kg * 9.76 m/s + 98.6 kg * 0 m/s = (0.257 kg + 98.6 kg) * (Va+b)
2.50632 kg*m/s = 98.857 kg * (Va+b)
Now, we will solve for Va+b:
Va+b = 2.50632 kg*m/s / 98.857 kg
Va+b ≈ 0.025 m/s
So, the new speed of the system when the ball is caught is approximately 0.025 m/s, rounded to three decimal places.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
Electrons got ejected out as if they were ping pong balls by the light particle (photon). Electrons were not moving initially. Then, it was moving later because of the light.
a. What is the momentum of the electron initially (p=mv) Hint: Is it moving initially?
b. Does the electron have momentum after being hit by the light particle? Hint: is it moving after being hit?
c. What can you infer about light particles in momentum? Hint: where is the electron getting its velocity from?
Electron initially had zero momentum. After colliding with a photon, it gained momentum due to the transfer of momentum. This demonstrates the wave-particle duality of light.
a. Yes, the electron has momentum after being hit by the light particle. This is because momentum is defined as the product of mass and velocity, and even though electrons are very small in mass, they still have mass and can therefore have momentum. In this case, the photon (light particle) transferred some of its momentum to the electron, causing it to move.
b. Yes, the electron has momentum and is moving after being hit by the light particle. As mentioned in the previous paragraph, the photon transferred some of its momentum to the electron, causing it to move.
c. Based on the fact that the electron received its velocity from the photon, we can infer that light particles also have momentum. In fact, it was later discovered that photons have both momentum and energy, even though they have no mass. This is because photons are made up of electromagnetic waves, which have both electric and magnetic fields that can transfer energy and momentum.
So, when a photon hits an electron, it can transfer some of its momentum to the electron and cause it to move. This concept is known as the wave-particle duality of light, where light can behave as both a wave and a particle.
Know more about momentum click here:
https://brainly.com/question/24030570
#SPJ11
In a coal plant, the coal is burned, converting its _____________________ into ___________________. the energy is then transferred from the burner to a boiler full of water. as the boiler turns the water into steam, it is converted into _________________________ which is used to turn the turbine. as the turbine turns the generator's magnets inside a wire, its _______________________ is converted into ______________________.
In a coal plant, the coal is burned, converting its chemical energy into thermal energy. This thermal energy is then transferred from the burner to a boiler full of water.
As the boiler turns the water into steam, it is converted into kinetic energy which is used to turn the turbine. As the turbine turns, the generator's magnets inside a wire, its kinetic energy is converted into electrical energy.
Coal is one of the most widely used fossil fuels for electricity generation. However, burning coal releases harmful pollutants into the atmosphere, including carbon dioxide, sulfur dioxide,
and nitrogen oxides. These emissions contribute to global warming, acid rain, and respiratory diseases.
To address these concerns, many coal plants have implemented technologies such as scrubbers, which remove harmful pollutants from the emissions before they are released into the atmosphere.
Additionally, some coal plants are transitioning to cleaner energy sources such as natural gas, wind, and solar power.
Overall, while coal-fired power plants have played a significant role in powering modern society, their impact on the environment has led to a push for cleaner and more sustainable forms of energy.
To know more about thermal energy refer here
https://brainly.com/question/18989562#
#SPJ11
A sample of diamagnetic material is initially at rest in a uniform magnetic field. if no other forces are present, how will the sample move
The sample will move very slowly in the opposite direction of the applied magnetic field, but it will eventually come to a stop when it reaches equilibrium.
Diamagnetic materials, unlike ferromagnetic or paramagnetic materials, do not possess any permanent magnetic moment or net magnetic dipole moment. The magnetic force acting on the diamagnetic material is perpendicular to its velocity, and hence it cannot accelerate the material along the direction of the magnetic field.
Since the sample is made of diamagnetic material, it will have a very weak and temporary magnetic moment induced in it when placed in a magnetic field. This induced magnetic moment will be in the opposite direction to the applied magnetic field. Therefore, the sample will experience a force in the direction opposite to the applied magnetic field. However, this force will be very weak since the diamagnetic material has a weak magnetic susceptibility.
To know more about diamagnetic materials, click here
https://brainly.com/question/30320581
#SPJ11
Terry is out with friends and sees a man who appears to be struggling with mental illness. He is ranting and waving his arms around in a very antagonistic way. He is getting more agitated and pulls out a knife and starts jabbing it like he is attacking someone. Should Terry call 9-1-1?
Yes, Terry should call 9-1-1 immediately because the man is mentally ill.
What should Terry do?Based on the statement, if Terry is out with friends and sees a man who appears to be struggling with mental illness. And the man is ranting and waving his arms around in a very antagonistic way. He is also getting more agitated and pulls out a knife and starts jabbing it like he is attacking someone.
The man's behavior is dangerous and poses a potential threat to himself and others around him. The fact that he has pulled out a knife and is waving it in a threatening manner indicates that he may be a danger to himself or others.
In this situation, it is important to prioritize everyone's safety and call for emergency services to intervene and help the man.
Learn more about emergency situations here: https://brainly.com/question/28335200
#SPJ1
The frequency of a slinky spring wave is 5 hertz with a wavelength of 0.8 meters. What is its velocity?
Answer:The frequency of a slinky spring wave is 5 hertz with a wavelength of 0.8 meters. What is its velocity?The speed can be found with a very simple equation: c = λ f = 0.8 ⋅ 5 = 4 m/s .
Explanation:
The speed can be found with a very simple equation: c = λ f = 0.8 ⋅ 5 = 4 m/s .
For problems 3,4, and 5, Consider an egg that has a mass of 0. 15 kg being held at the top of a flight of stairs.
3. If an egg has 11 J at the top of the stairs, what is the height of the stairs?
4. If the egg is dropped from that height, what is the Kinetic energy right before the egg hits the ground?
5. If the egg is dropped down to the ground from that height, what is the velocity of the egg right before the egg hits the ground?
Considering an egg has a mass of 0.15 kg being at the top of a flight of stairs, the answers to the following questions are:
3. To find the height of the stairs, we'll use the potential energy formula: PE = mgh, where PE is potential energy (11 J), m is mass (0.15 kg), g is acceleration due to gravity (9.81 m/s^2), and h is the height we want to find.
Rearranging the formula for h: h = PE / (mg) => h = 11 J / (0.15 kg × 9.81 m/s^2) => h ≈ 7.47 m. So, the height of the stairs is approximately 7.47 meters.
4. When the egg is dropped and reaches the ground, all of its potential energy is converted into kinetic energy. Therefore, the kinetic energy right before the egg hits the ground is equal to its initial potential energy, which is 11 J.
5. To find the velocity right before the egg hits the ground, we'll use the kinetic energy formula: KE = 0.5mv^2, where KE is kinetic energy (11 J), m is mass (0.15 kg), and v is the velocity we want to find.
Rearranging the formula for v: v = sqrt(2 × KE / m) => v = sqrt(2 × 11 J / 0.15 kg) => v ≈ 12.12 m/s. So, the velocity of the egg right before it hits the ground is approximately 12.12 m/s.
To learn more about velocity, refer below:
https://brainly.com/question/17127206
#SPJ11
Jose conducted an experiment to measure the rate of minerals dissolving in water and changed the temperature of the water for each trial.
What is the independent variable in this experiment?
A: number of trials being tested
B: temperature of the water
C: type of minerals used for each trial
D: rate the minerals dissolved
The temperature of the water is the independent variable because it is being deliberately changed by the experimenter to see how it affects the rate of mineral dissolution. Option B.
What is an independent variable?The independent variable is the variable that the researcher intentionally changes or manipulates in an experiment in order to observe its effect on the dependent variable.
In this case, the independent variable is the temperature of the water because it is what Jose is changing in each trial to see how it affects the rate at which the minerals dissolve.
The dependent variable, on the other hand, is the rate at which the minerals dissolve, because it is what is being measured and expected to change based on the independent variable.
More on independent variables can be found here: https://brainly.com/question/29430246
#SPJ1
For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.
For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.
a) To calculate the kinetic energy per kilogram of mass of the flea, we can use the formula
KE/kg = KE / m
Where KE is the kinetic energy of the flea and m is its mass in kilograms.
First, we need to convert the mass of the flea from milligrams to kilograms
m = 0.460 mg / 1000 = 0.00046 kg
Next, we can use the equation for gravitational potential energy
PE = m * g * h
Where g is the acceleration due to gravity (9.81 m/s^2) and h is the height the flea jumped (0.15 m).
Therefore, the potential energy of the flea is
PE = 0.00046 kg * 9.81 m/s^2 * 0.15 m = 0.00068 J
The kinetic energy of the flea just before takeoff would be equal to its potential energy, assuming that all of its energy was converted from potential energy to kinetic energy during the jump. Therefore:
KE = 0.00068 J
Finally, we can calculate the kinetic energy per kilogram of mass
KE/kg = KE / m = 0.00068 J / 0.00046 kg = 1.48 J/kg.
b) To find out how high the 79.0 kg, 2.00-m-tall human could jump if they could jump to the same height compared with their length as the flea jumps compared with its length, we can use the equation
Height = body length x 60
Where body length is the length of the body from the feet to the top of the head.
Assuming an average body proportion, we can estimate the body length of the human to be about 1.7 meters.
Therefore, the height the human could jump would be
height = 1.7 m x 60 = 102 m.
However, it is important to note that this calculation is purely theoretical and does not take into account the many physiological and biomechanical limitations that would make such a jump impossible for a human.
The given question is incomplete and the complete question is '' For its size, the common flea is one of the most accomplished jumpers in the animal world. A 2.50-mm-long, 0.460 mg flea can reach a height of 15.0 cm in a single leap. a) Calculate the kinetic energy per kilogram of mass. b) If a 79.0 kg, 2.00-m-tall human could jump to the same height compared with his length as the flea jumps compared with its length, how high could the human jump''.
To know more about common flea here
https://brainly.com/question/15393026
#SPJ4
a fuel was used to heat water in a calorimetry experiment. when propane was burnt, 17000.0 j of heat was transferred to the water, which lead to a temperature change of 7.16 k. calculate the mass of water that was heated. (the specific heat capacity of water
The mass of water that was heated in the calorimetry experiment was 547.73 g.
T is the temperature change (7.16 K). Rearranging the formula to find the mass (m):
m = Q / (cΔT) Plugging in the values:
m = 17000.0 J / (4.18 J/g·K × 7.16 K) m ≈ 657.71 g
So, approximately 657.71 grams of water was heated in the calorimetry experiment.
To calculate the mass of water that was heated, we need to use the formula:
Q = m × c × ΔT
where Q is the heat transferred, m is the mass of water, c is the specific heat capacity of water, and ΔT is the temperature change.
We are given that Q = 17000.0 J, ΔT = 7.16 K, and c = 4.18 J/(g·K) (the specific heat capacity of water). We can rearrange the formula to solve for m:
m = Q / (c × ΔT)
Substituting the values we have:
m = 17000.0 J / (4.18 J/(g·K) × 7.16 K)
m = 547.73 g
To learn more about : calorimetry
https://brainly.com/question/28537741
#SPJ11
state types reflection of light
Answer: Specular and Diffuse reflection
Explanation: I'm assuming this is what you need. Specular is light reflected from a smooth surface at an angle. Diffuse is related to rough surfaces, generally, light is reflected in all directions with diffuse reflection
Titan, with a radius of 2. 58 x 10^6 m, is the largest moon of the planet Saturn. If the mass of Titan is 1. 35 x10^23 kg, what is the acceleration due to gravity on the surface of this moon?
A. 1. 35 m/s^2
B. 3. 49 m/s^2
C. 3. 49 x 10^6 m/s^2
D. 1. 35 x 10^6 m/s^2
The acceleration due to gravity on the surface of Titan is approximately 3.49 m/s². Thus, the correct option is B. 3.49 m/s².
To calculate the acceleration due to gravity on the surface of Titan, we can use the formula:
Acceleration due to gravity (g) = G * (Mass of Titan / Radius of Titan²)
Where:
G is the gravitational constant, approximately
[tex]6.67430 * 10^{-11} m^3/(kgs^2)[/tex]
Mass of Titan = 1.35 × [tex]10^{23[/tex] kg
Radius of Titan = 2.58 × [tex]10^6[/tex] m
Plugging in the values into the formula:
[tex]g = (6.67430 * 10^{-11} m^3/(kgs^2)) * (1.35 * 10^{23} kg) / (2.58 * 10^6 m)^2[/tex]
Calculating the value:
g ≈ 3.49 m/s²
To know more about acceleration due to gravity refer here
https://brainly.com/question/13860566#
#SPJ11
A harmonic wave travels in a wire with
amplitude 3. 66 mm, wavelength 2. 17 m, and
frequency 615 Hz.
What is the speed with which the wave
travels?
Answer in units of m/s.
The speed with which the wave travels in the wire is 1333.55 m/s.
The speed with which a harmonic wave travels in a wire can be determined using the equation:
v = λf
where v is the speed of the wave, λ is the wavelength, and f is the frequency.
Substituting the given values, we get:
v = 2.17m * 615Hz
v = 1333.55 m/s
It's worth noting that the amplitude of the wave, which is given as 3.66mm, does not affect the speed of the wave.
The amplitude of a wave is the maximum displacement of a point on the wave from its rest position,
whereas the speed of the wave is determined by the properties of the medium through which it travels, such as its density and elasticity.
Harmonic waves are common in many physical systems, such as sound waves in air and electromagnetic waves in space.
Understanding the properties and behavior of waves is important in many areas of science and technology, from acoustics and optics to communications and signal processing.
To know more about harmonic wave refer here
https://brainly.com/question/8885243#
#SPJ11
Two devices of rating 22 W; 220 V and 11 W; 220 V are connected in series. The combination is
connected across a 440 V mains. The fuse of which of the two devices is likely to burn when
switch is on ? Justify your name.
The 11 W device is likely to burn out when the switch is turned on, due to the higher voltage it will be subjected to compared to its rated voltage. It is important to ensure that the devices used in a circuit have the appropriate voltage rating to avoid damage or failure.
When two devices with different power ratings are connected in series, the voltage across each device is divided according to their power ratings. In this case, the two devices are rated 22 W and 11 W, respectively, and are connected in series across 440 V mains. The voltage across each device can be calculated using the formula V = P/I, where V is the voltage, P is the power rating, and I is the current.
For the 22 W device, the voltage across it is V = P/I = 22/0.1 = 220 V. For the 11 W device, the voltage across it is V = P/I = 11/0.1 = 110 V. Therefore, the 22 W device has a voltage rating of 220 V, which is the same as the voltage of the mains, and the 11 W device has a voltage rating of 110 V.
When the switch is turned on, the voltage across the two devices will be the same, which is 220 V. Therefore, the 22 W device will operate normally, but the 11 W device will be subjected to a higher voltage than its rated voltage. As a result, the 11 W device is likely to burn out before the 22 W device.
To learn more about voltage rating
https://brainly.com/question/29734919
#SPJ4
What was 15 A pendulum bob has a mass of 1 kg. The length of the pendulum is 2 m. The bob is pulled to one side to an angle of 10° from the vertical. A) What is the velocity of the pendulum bob as it swings through its lowest point? b) What is the angular velocity of the pendulum bob?
We get: v = sqrt(2gh) = sqrt(29.812) ≈ 6.26 m/sa). The angular velocity of the pendulum bob is approximately 3.13 rad/s.
At the highest point, the potential energy of the bob is at its maximum, and as it swings down, the potential energy converts to kinetic energy.
At the lowest point, all the potential energy is converted into kinetic energy, so we can use the conservation of energy principle to find the velocity of the pendulum bob at its lowest point.
The potential energy at the highest point is given by mgh, where m is the mass, g is the acceleration due to gravity, and h is the height above the lowest point.
The potential energy at the highest point is equal to the kinetic energy at the lowest point, so we can write: mgh = (1/2)mv^2
where v is the velocity of the pendulum bob at its lowest point. Plugging in the values given, we get: v = sqrt(2gh) = sqrt(29.812) ≈ 6.26 m/s
b) The angular velocity of the pendulum bob is given by ω = v/r, where r is the length of the pendulum. Plugging in the values given, we get: ω = v/r = 6.26/2 ≈ 3.13 rad/s
Therefore, the angular velocity of the pendulum bob is approximately 3.13 rad/s.
To know more about pendulum, refer here:
https://brainly.com/question/29268528#
#SPJ11
(a) (i) The work function of caesium is 3.0 x 10-19 J. Explain what this
statement means.
(ii)
[1]
Calculate the frequency of radiation needed to eject electrons of
maximum kinetic energy 6.0 x 10-19 J from a caesium surface. [2]
The work function of caesium being 3.0 x 10^-19 J means that to remove an electron from the surface of caesium, at least 3.0 x 10^-19 J of energy must be supplied to that electron.
What is a work function?The work function of a metal refers to the minimum amount of energy required to remove an electron from the surface of that metal. It is the energy required to overcome the attractive forces between the electron and the metal surface. The work function is usually denoted by the symbol Φ, and its unit is joules (J).
In the case of caesium, the work function is 3.0 x 10^-19 J. This means that to remove an electron from the surface of caesium, at least 3.0 x 10^-19 J of energy must be supplied to that electron.
To calculate the frequency of radiation needed to eject electrons of maximum kinetic energy 6.0 x 10^-19 J from a caesium surface, we can use the formula:
maximum kinetic energy = hf - Φ
where h is Planck's constant (6.626 x 10^-34 J s), f is the frequency of the radiation, and Φ is the work function.
If we rearrange this formula to solve for the frequency f, we get:
f = (maximum kinetic energy + Φ) / h
Substituting the given values, we get:
f = (6.0 x 10^-19 J + 3.0 x 10^-19 J) / (6.626 x 10^-34 J s)
f = 7.57 x 10^14 Hz
Therefore, the frequency of radiation needed to eject electrons of maximum kinetic energy 6.0 x 10^-19 J from a caesium surface is 7.57 x 10^14 Hz.
More on work functions can be found here: https://brainly.com/question/20523183
#SPJ1
The stress on a wire that support a load depend on?
The stress on a wire that supports a load depends on the weight of the load and the cross-sectional area of the wire.
The stress is defined as the amount of force per unit area, so a larger load or a smaller wire cross-sectional area will result in a higher stress on the wire.
In addition to these factors, the material properties of the wire are also important in determining the stress. Different materials have different strengths and may behave differently under stress.
For example, a wire made of a brittle material may fail suddenly under stress, while a wire made of a ductile material may bend or deform before breaking.
To know more about ductile material, refer here:
https://brainly.com/question/12975499#
#SPJ11
The moon revolves around the earth once every 27. 3 days. Calculate the angular
velocity of the moon.
albs TIS.
a. 2. 0 x 10-5 rad/s
elbst Ad
b. 4. 2 x 10-6 rad/s
albs7 TE
c. 3. 3 x 10-5 rad/s
albs Tab
d. 2. 7 x 10-6 rad/s
diboley sitranslatai JSW. 01
n of tho moon
The angular velocity of the moon is approximately [tex]2.7 \times 10^{-6[/tex] rad/s, which is the answer (d).
To calculate the angular velocity of the moon, we first need to understand what angular velocity is. Angular velocity is defined as the rate of change of angular displacement with respect to time. In simpler terms, it is the speed at which an object is rotating or moving in a circular path.
In this case, the moon is moving in a circular path around the Earth, so we can use the formula for angular velocity:
ω = θ / t
where ω is the angular velocity, θ is the angular displacement, and t is the time taken for one complete revolution.
We know that the time taken for one complete revolution of the moon around the Earth is 27.3 days. To convert this into seconds, we multiply by 24 hours in a day, 60 minutes in an hour, and 60 seconds in a minute:
t = 27.3 x 24 x 60 x 60 = 2,360,320 seconds
Now we need to find the angular displacement of the moon in one complete revolution. Since the moon moves in a circular path, its angular displacement is equal to the angle subtended by its path at the center of the earth. This angle is equal to 2π radians since the circumference of a circle is 2π times its radius (in this case, the distance from the moon to the center of the earth).
θ = 2π radians
Now we can substitute these values into the formula for angular velocity:
[tex]\omega = \frac{\theta}{t} = \frac{2\pi}{2{,}360{,}320} \approx 2.7\times 10^{-6}\ \mathrm{rad/s}[/tex]
To learn more about angular velocity
https://brainly.com/question/30885221
#SPJ4
Leilani Hendricks
4/4/23
Test Name: T-Science-Gr5-T5-PBT (2022-2023)
Test ID: 2710825
1. Sophia rides her bike to and from school. Sophia's bike has a special tape that reflects energy from
the sun to make it easier for cars to see her. She also uses a bell to let other bikers know if she is going
to move pass them. Which of the following form of energy does Sophia not use when biking?
A. mechanical energy
B. sound energy
C. light energy
D. electrical energy
D. Electrical energy. Sophia does not use electrical energy when biking. The special tape on her bike reflects light energy from the sun to make it easier for cars to see her.
What is Light Energy?
Light energy is a form of electromagnetic radiation that travels through space as waves, and can be perceived by the human eye as colors of the visible spectrum. Light energy can also exist as particles called photons. Light energy is able to travel through transparent or translucent substances, such as air, water, and glass. Light energy plays a crucial role in many natural processes, such as photosynthesis, vision, and the heating of the Earth's atmosphere. It is also widely used by humans in applications such as lighting, telecommunications, and photography.
She uses a bell, which creates sound energy, to let other bikers know if she is going to move past them. The mechanical energy is used by Sophia to pedal the bike and move it forward.
Learn more about Light Energy from the given link
https://brainly.com/question/21288390
#SPJ9
Claim how it would be possible to predict the speed that a 2000 kg car full with riders will reach before it’s ever placed on the track. Cite evidence by using the appropriate formulas and reasoning by solving them in order to calculate the speed of the car at the bottom of the first hill
We can predict that the car full of riders will reach a speed of 28.0 m/s at the bottom of the first hill based on the principles of conservation of energy.
It is possible to predict the speed that a 2000 kg car full with riders will reach before it's ever placed on the track using the principles of conservation of energy. According to the law of conservation of energy, the total energy in a system remains constant, and it can be converted from one form to another.
To calculate the speed of the car at the bottom of the first hill, we can use the conservation of energy equation, which states that the initial potential energy (PEi) of the car is equal to the final kinetic energy (KEf) of the car.
PEi = KEf
[tex]mgh = 1/2mv^2[/tex]
Where m is the mass of the car, g is the acceleration due to gravity, h is the height of the hill, and v is the velocity of the car.
Solving for v, we get:
[tex]v = \sqrt{(2gh)}[/tex]
Using the given values of m = 2000 kg, h = 40 meters, and g = 9.81 m/s², we can calculate the velocity of the car at the bottom of the first hill:
[tex]v = \sqrt{(2gh)} = \sqrt{(2 \times 9.81 \;m/s^2 \times 40 m)} = 28.0 m/s[/tex]
Therefore, we can predict that the car full of riders will reach a speed of 28.0 m/s at the bottom of the first hill based on the principles of conservation of energy.
In summary, by using the conservation of energy equation, we can predict the speed of the car at the bottom of the first hill based on its mass and the height of the hill. We found that the car full of riders will reach a speed of 28.0 m/s using this method.
To know more about speed refer here:
https://brainly.com/question/28060745#
#SPJ11
Why was it important that dr. Jeff use a large ball to represent the sun a marble to represent the earth and a bead to represent the moon in his model
It was important for Dr. Jeff to use a large ball to represent the sun because the sun is much larger than the earth and the moon. Similarly, using a marble to represent the earth and a bead to represent the moon accurately represents their relative sizes in comparison to the sun. This helps to provide a visual representation that accurately depicts the sizes of the celestial bodies in question, which is important when teaching and understanding astronomical concepts.
Visit https://brainly.com/question/12075871 to learn more about the Solar System
#SPJ11
Two balloons are separated by a distance of 25. 5 cm. One balloon is charged with a charge of + 6. 25 nC = + 6. 25 x 10-9 C and the other balloon is charges with a charge of - 3. 5 nC = - 3. 5 x 10-9 C. Calculate the magnitude of Coulombic Force between them. Explain what kind of coulombic force will exist between them (attractive or repulsive)?
The magnitude of Coulombic force between the two balloons is [tex]3.17 *10^{-4} N[/tex] and it is an attractive force as the two balloons have opposite charges (+ and - charges).
The Coulombic force between the two charged balloons can be calculated using Coulomb's law:
[tex]F = k * (q1 * q2) / r^2[/tex]
where F is the force, k is the Coulomb constant [tex](9 * 10^9 N*m^2/C^2)[/tex], q1 and q2 are the charges of the two balloons, and r is the distance between them.
Substituting the given values, we get:
F =[tex]9 * 10^9 * [(+6.25 * 10^{-9}) * (-3.5 * 10^{-9})] / (0.255)^2[/tex]
F = [tex]-3.17 *10^{-4} N[/tex] (negative sign indicates an attractive force)
To know more about Coulomb's law refer here
https://brainly.com/question/506926#
#SPJ11
The thinking distance and braking distance for a car vary with the speed of the car.
explain the effect of two other factors on the braking distance of a car.
do not refer to speed in your answer.
Two other factors that affect the braking distance of a car are the condition of the road surface and the condition of the brakes.
On a wet or icy road, the braking distance will be longer compared to a dry road as the tires have less grip.
Similarly, if the brakes are worn out or not properly maintained, the braking distance will increase.
This is because the brakes will not be able to apply enough force to the wheels to slow down the car effectively.
Therefore, it is important to ensure that the brakes are well maintained and the tires are appropriate for the road conditions to reduce the braking distance and avoid accidents.
To know more about brakes, refer here:
https://brainly.com/question/30327253#
#SPJ11
If x = 3.0 cm and y = 15.0 cm, what is the ideal mechanical advantage (ima) of the
pliers?
If x = 3.0 cm and y = 15.0 cm, The ideal mechanical advantage (ima) of the pliers is: 5.
The IMA of pliers can be determined by using the formula:
IMA = Length of Effort Arm (y) / Length of Resistance Arm (x)
In this case, y is the length of the effort arm (15.0 cm), and x is the length of the resistance arm (3.0 cm). Plugging these values into the formula, we get:
IMA = 15.0 cm / 3.0 cm
IMA = 5
So, the ideal mechanical advantage of the pliers is 5. This means that, ideally, the force applied by the pliers is magnified by a factor of 5.
To know more about mechanical advantage, refer here:
https://brainly.com/question/6968974#
#SPJ11
A spring with a k value of 350 and a mass of 5 grams is compressed 3. 5cm and then released to launch into the air. Assuming all EPE is converted into GPE and no energy is lost to friction, how high up will the spring go?
A spring with a k value of 350 and a mass of 5 grams is compressed and released, converting all EPE into GPE. It rises up to a height of 4.37 meters before stopping, assuming no energy is lost to friction.
The potential energy stored in a spring is given by the formula:
[tex]EPE = 1/2 \times k \times x^2[/tex]
where k is the spring constant and x is the displacement of the spring from its equilibrium position. In this case, the spring is compressed by 3.5 cm or 0.035 meters, so the potential energy stored in the spring is:
[tex]EPE = 1/2 \times 350 \times 0.035^2 = 0.214 J[/tex]
When the spring is released, all of this potential energy is converted into gravitational potential energy (GPE) as the spring rises up in the air. The formula for GPE is:
[tex]GPE = m \times g \times h[/tex]
where m is the mass of the object, g is the acceleration due to gravity, and h is the height above the starting position.
Substituting the values given in the problem, we get:
[tex]0.214 J = 0.005 \;kg \times 9.81 \;m/s^2 \times h[/tex]
Solving for h, we get:
[tex]h = 0.214 J / (0.005 \;kg \times 9.81 \;m/s^2) = 4.37 m[/tex]
Therefore, the spring will rise up to a height of 4.37 meters before coming to a stop, assuming no energy is lost to friction.
In summary, by using the formulas for potential energy and gravitational potential energy, we can calculate the height that a spring will reach when launched into the air.
We found that the spring with a k value of 350 and a mass of 5 grams, when compressed 3.5 cm and released, will rise up to a height of 4.37 meters if all EPE is converted into GPE and no energy is lost to friction.
To know more about height refer here:
https://brainly.com/question/30632837#
#SPJ11
Two lines meet at a point that is also the vertex of a right angle. Set up and solve an equation to find the value of. Find the measurements of ∠CAE and ∠BAG.
1: What is the value of x?
2: What is the value of ∠CAE?
3: What is the value of ∠BAG?
Two lines meet at a point that is also the vertex of a right angle. The value of x is 0 degrees, the value of ∠CAE is 0 degrees and the value of ∠BAG is 90 degrees.
Since the point of intersection is the vertex of a right angle, we know that the sum of the angles formed by the two lines must be 180 degrees.
Let's assume that angle BAC is equal to x. Then we have:
∠BAC + ∠CAD + ∠BAE = 180 degrees
Since ∠CAD and ∠BAE are both right angles, we have:
x + 90 degrees + 90 degrees = 180 degrees
Simplifying this equation, we get:
x = 180 degrees - 90 degrees - 90 degrees
x = 0 degrees
Therefore, angle BAC is equal to 0 degrees.
Since angle CAD is a right angle, angle CAE is equal to 90 degrees - angle CAD. Substituting 90 degrees for angle CAD, we get:
∠CAE = 90 degrees - 90 degrees = 0 degrees
Therefore, angle CAE is also equal to 0 degrees. Similarly, since angle BAE is a right angle, angle BAG is equal to 90 degrees - angle BAE. Substituting 90 degrees for angle BAE, we get:
∠BAG = 90 degrees - x = 90 degrees - 0 degrees = 90 degrees
Therefore, angle BAG is equal to 90 degrees.
In summary, by using the fact that the sum of the angles formed by the two lines must be 180 degrees, we can solve for the value of x and the measurements of angles CAE and BAG. We found that x is equal to 0 degrees, angle CAE is equal to 0 degrees, and angle BAG is equal to 90 degrees.
To know more about right angle refer here:
https://brainly.com/question/29623146#
#SPJ11
two skaters on a frictionless pond push apart from one another. one skater has a mass of 80 kg and the other a mass of 60 kg. after some time the two skaters are a distance 10 m apart. how far has the lighter skater moved from her original position?
The lighter skater has moved 10 meters in the opposite direction from the heavier skater.
The skaters are initially at rest on the frictionless pond, so the total momentum of the system is zero. When they push away from each other, their momenta change, but the total momentum of the system remains zero. This is known as the conservation of momentum. Let's denote the initial position of the lighter skater as x1 and the final position as x2. The heavier skater moves in the opposite direction, so their final position is x2 + 10 m.
Using the conservation of momentum, we can write:
(m1)(v1) + (m2)(v2) = 0
where m1 and m2 are the masses of the skaters, and v1 and v2 are their velocities. Since the skaters were initially at rest, we have v1 = 0. Solving for v2, we get:
v2 = -(m1/m2) * v1 = 0
So the final velocity of the skaters is zero. The distance traveled by the lighter skater is equal to the distance between their initial and final positions, which is:
x2 - x1 = -10 m
As a result, the lighter skater has travelled 10 meters opposite the heavier skater.
To know more about the Skaters, here
https://brainly.com/question/30800977
#SPJ4
On its highest power setting, a certain microwave oven projects 1.00kW of microwaves onto a 30.0 by 40.0 cm area. (A) what is the intensity in W/m^2 ? (B) calculate the peak electric field srength E0 in these waves. (C) what is the peak magnetic field strength B0?we use the equation I=P/A. which gives us the answer 8.33 * 10^3 W/m^2 and then moves on to give us 2I average = 1.67 * 10^4.i dont understand how they got the 2Iave=1.67×10^4
On its highest power setting, a certain microwave oven projects 1.00kW of microwaves onto a 30.0 by 40.0 cm area. Intensity is 8.33 × 10^3 W/m^2, Peak electric field strength is 4.84 × 10^4 V/m, Peak magnetic field strength is 1.61 × 10^-4 T
(A) To find the intensity (I) in W/m^2, we use the formula I = P/A, where P is power and A is area.
Power (P) = 1.00 kW = 1000 W
Area (A) = 30.0 cm × 40.0 cm = 0.3 m × 0.4 m = 0.12 m^2
I = P/A = 1000 W / 0.12 m^2 = 8.33 × 10^3 W/m²
(B) The average intensity (I_average) is related to the peak electric field strength (E0) by the formula:
I_average = (1/2) × ε0 × c × E0^2
where ε0 is the vacuum permittivity (8.85 × 10^-12 C^2/N·m^2), c is the speed of light (3 × 10^8 m/s), and E0 is the peak electric field strength.
To find the peak electric field strength, first, we'll rearrange the formula to isolate E0:
E0^2 = (2 × I_average) / (ε0 × c)
E0 = sqrt((2 × I_average) / (ε0 × c))
Now, let's plug in the values:
E0 = sqrt((2 × 8.33 × 10^3 W/m^2) / (8.85 × 10^-12 C^2/N·m^2 × 3 × 10^8 m/s))
E0 ≈ 4.84 × 10^4 V/m
(C) To find the peak magnetic field strength (B0), we use the formula:
B0 = E0 / c
B0 = (4.84 × 10^4 V/m) / (3 × 10^8 m/s)
B0 ≈ 1.61 × 10^-4 T
Learn more about microwave oven here:-
https://brainly.com/question/29944171
#SPJ11
A heat engine takes in 6.45 × 103 J of thermal energy from a reservoir at 600 K and returns some of this energy to a reservoir at TL < 600 K .If this engine operates at an efficiency of 0.450, what is the maximum value possible for TL?
A heat engine operates on a Carnot cycle that runs clockwise between a reservoir at 315 K and a reservoir at 280 K. One cycle moves enough energy from the high-temperature reservoir to raise the temperature of 1.0 kg of water by 1.0 K. How much work is done by the engine in one cycle?
The work done by the engine in one cycle is approximately 465.1 J.
For the first question, we need to find the maximum value for TL. We know the efficiency of the engine (η) is 0.450, and the efficiency of a Carnot engine is given by the formula:
η = 1 - (TL / TH)
where TH is the high-temperature reservoir (600 K) and TL is the low-temperature reservoir. We can rearrange this formula to solve for TL:
TL = TH * (1 - η)
Plugging in the given values:
TL = 600 K * (1 - 0.450)
TL = 600 K * 0.550
TL = 330 K
The maximum value possible for TL is 330 K.
For the second question, we are given that one cycle moves enough energy from the high-temperature reservoir (315 K) to raise the temperature of 1.0 kg of water by 1.0 K. The specific heat capacity of water is 4.186 J/gK or 4186 J/kgK. So, the heat transferred (Q) is:
Q = mass * specific heat capacity * temperature change
Q = 1.0 kg * 4186 J/kgK * 1.0 K
Q = 4186 J
In a Carnot engine, efficiency (η) is given by the formula:
η = 1 - (TL / TH)
Plugging in the given values:
η = 1 - (280 K / 315 K)
η = 1 - 0.8889
η = 0.1111
The efficiency of the engine is 0.1111. To find the work done (W) by the engine in one cycle, we can use the formula:
W = η * Q
Plugging in the values:
W = 0.1111 * 4186 J
W ≈ 465.1 J
Learn more about work done here:-
https://brainly.com/question/13662169
#SPJ11
you pull a friend up a 50 m rocky slope with tension force in the rope of 490 N the slope is very steep what work will you need to do in order to pull up your friend
Explanation:
F x d = work
490 N * 50 m = 24 500 J of work
A uniform disk of radius 0.455 m0.455 m and unknown mass is constrained to rotate about a perpendicular axis through its center. a ring with the same mass as the disk is attached around the disk's rim. a tangential force of 0.227 n0.227 n applied at the rim causes an angular acceleration of 0.109 rad/s2.0.109 rad/s2. find the mass of the disk.
The mass of the disk is 1.90 kg.We can start by using the formula for torque, which relates torque to angular acceleration and moment of inertia:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Since the disk is rotating about a perpendicular axis through its center, its moment of inertia can be calculated as:
I_disk = (1/2)MR^2
where M is the mass of the disk and R is its radius.
Similarly, the moment of inertia of the ring can be calculated as:
I_ring = MR^2
where M is the mass of the ring and R is its radius (which is the same as the radius of the disk).
Since the disk and ring have the same mass, we can add their moments of inertia to get the total moment of inertia:
I_total = I_disk + I_ring = (1/2)MR^2 + MR^2 = (3/2)MR^2
Now we can use the given values of torque and angular acceleration to solve for the mass of the disk:
τ = (1/2)MR^2α
0.227 N-m = (1/2)M(0.455 m)^2(0.109 rad/s^2)
Solving for M, we get:
M = 0.227 N-m / [(1/2)(0.455 m)^2(0.109 rad/s^2)] = 1.90 kg
Therefore, the mass of the disk is 1.90 kg.
To know more about the mass of inertia click here:
https://brainly.com/question/12095689
#SPJ11