Answers
And do follow if you appreciate it
Related Questions
How does the electronic configuration of an element give information about the period and the group it belongs to
Answers
Answer:
Electronic configuration of an element gives the information of valence electrons and number of shell present in the element.
Explanation:
Electronic configuration of an element gives the information of valence electrons and number of shell present in the element. We get the information of group number after knowing valence electrons.
The number of shells present in an element is equal to the period number. Thus, by knowing electronic configuration we know the group number and period number of an element, and the position of an element in the periodic table.
An element's electronic configuration, which identifies both its period and group, gives important details regarding its place within the periodic table.
The major energy level (shell) where the outermost electrons are found determines the period. In the electrical arrangement, the period number corresponds to the greatest energy level. The number of valence electrons, which are the electrons at the highest energy level, which are present in an element determines its group or family. Because they have the same valence electron configurations, elements in the same group exhibit comparable chemical characteristics. In conclusion, the electronic configuration helps us comprehend an element's chemical behavior and interactions with other elements by revealing an element's period based on energy levels and its group based on valence electrons.
To know more about electronic configuration, here
brainly.com/question/29184975
#SPJ3
4) A sample of sodium bromide, NaBr, has a mass percentage of sodium of 22.34%.
a) If the sample of sodium bromide were contaminated with sodium chloride, NaCl, would the mass percentage of Na in the sample be higher or lower than the pure sample? Justify your claim.
b) If the sample of sodium bromide were contaminated with sodium iodide, NaI, would the mass percentage of Na in the sample be higher or lower than the pure sample? Justify your claim
Answers
Explanation:
The trick here is to realize the every sample of sodium bromide, regardless of its mass, will contain
22.34
%
sodium by mass.
This is true because sodium and bromide always combine in definite proportions, i.e. stable ratios by mass, to form sodium bromide.
Now, a
22.34
%
percent concentration by mass means that every
100 g
of sodium bromide will contain
22.34 g
of sodium and
100 g
−
22.34 g
=
77.66 g Br
Therefore, you can say that the mass ratio that exists between sodium and bromine in any sample of sodium bromide will be
22.34 g Na
77.66 g Br
=
22.34
77.66
You can thus use this definite proportion to say that a
5.69 g
sample of sodium bromide will contain
5.69
g NaBr
⋅
22.34 g Na
100
g NaBr
=
1.271 g Na
=
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
∣
∣
a
a
1.27 g Na
a
a
∣
∣
−−−−−−−−−−−−−
The answer is rounded to three sig figs.
You can use the known definite proportion to find the mass of bromide present in the sample
1.271
g NaBr
⋅
77.66 g Br
22.34
g NaBr
=
4.42 g Br
This checks out because
mass of NaBr sample
5.69 g
−
mass of Na
1.27 g
=
mass of Br
4.42 g
The answers to your questions are ;
a) The mass percentage of Na in the sample will be higher in the sample
b) The mass percentage of Na in the sample will be be lower in the sample
Given that:
Mass percentage of sodium contained in sodium Bromide = 22.34%
a) Determine if the mass percentage of Na will be higher or lower when sodium Bromide is contaminated with sodium chloride
mass percentage of Na in sodium bromide
= ( mass of Na / mass of NaBr )*100
The mass of sodium in NaBr and NaCl is the same while the mass of Br is not same ( greater than ) as the mass of Cl. hence when NaBr is contaminated with NaCl the total mass of in percentage NaBr will decrease. and This decrease in mass of NaBr will lead to a decrease/lower mass percentage of Na in the sample
b) When NaBr is contaminated with NaI
The mass of Na is the same in NaBr and NaI while the mass of I is not the same ( greater than ) as the mass of Br, therefore the total mass will increase and the increase in the Total mass in percentage will lead to an increase/higher value of Na in the given sample.
hence the mass percentage of Na will decrease when NaBr is contaminated with NaCl while the mass percentage of Na will increase when NaBr is contaminated with NaI
Learn more : https://brainly.com/question/3244231
1°C rise in temperature is equal to a rise of
Answers
Answer:
1°C rise in temperature is equal to a rise of 59°F
Answer:
Hence 1℃ rise in temperature is equal to the rise in 59℉.
pls do brainliest
If I have a bottle of compound X at a pressure of 45 atm and temperature of 100 °C, what will happen if I raise the temperature to 400 °C?*
Answers
Answer:
55/350
Explanation:
because the answer is in the middle of 50and 400
which statement correctly contrasts science and psuedoscience
Answers
Answer:
The correct answer is Science is objective, whereas pseudoscience is subjective. Pseudoscience includes beliefs, theories, or practices that have been or are considered scientific, but have no basis in scientific fact. This could mean they were disproved scientifically, can't be tested or lack evidence to support them.
Explanation:
hope its help
thank you
Element X forms the ion X22- What is the formula of the covalent compound X forms with chlorine?
A XCI
B XCl2
C XCl3
D XCl4
Answers
Answer:
the answer is mostly option a)XCl
Explanation:
Rain soaks into the soil or runs off into oceans, rivers, and lakes. ___________ which process is this
Answers
Answer:
The water falls to the earth as precipitation, such as rain, hail, sleet, and snow. When precipitation reaches the earth's surface, some of it will flow along the surface of the land and enter surface water like lakes, streams, and rivers, as runoff. The rest of it soaks or percolates into the soil, called
what is chemical change ?
Answers
Pls give me a brainliest thx
[tex]\huge{ \color{violet}{ \boxed{ \color{hotpink}{Answer}}}}[/tex]
➣ Chemical ChangeIt occurs when new materials are formed by a change in the way the atoms are bonded together.Heat, light or electrical energy is often emmitted or absorbed.[tex] \: [/tex]
[tex]\large\tt\:⚘ \: MishiChaeYoon \: ⚘[/tex]
Which of the following is NOT a density formula?
Density = mass/volume
Density = volume/mass
mass = density x volume
volume = mass/density
Answers
Explanation:
There is a clear relationship between mass, density and volume. Unlike mass and volume, increasing the amount of material measured does not increase or decrease density. However, since volume deviates with changes in temperature and pressure, density can also change with temperature and pressure.
Density doesn’t depend on mass and volume because there are many different mass and volumes when it becomes density.
An certain element Y has two naturally occurring isotopes, 6Y (isotopic mass = 6.015123 amu) and 7Y (isotopic mass = 7.016005 amu). If the atomic mass of the element is 6.9412 amu. What is the percent abundance of 6Y?
Do not include the symbol "%" in your answer.
Report the correct answer to three significant figures
Answers
The percentage abundance of 6Y is 0.102.
An Isotope refers to two or more atoms that has the same atomic number but different mass numbers.
We have been informed from the question that the atomic mass of the element is 6.9412 amu.
Let the abundance of isotope 6Y be x
Let the abundance of isotope 7Y be 1-x
Hence;
6.9412 = 6.015123x + 7.016005(1 - x)
6.9412 = 6.015123x + 7.016005 - 7.016005x
6.9412 - 7.016005 = 6.015123x - 7.016005x
-0.102 = -1x
x = -0.102/-1
x = 0.102
Hence the percentage abundance of isotope 6Y is 0.102.
https://brainly.com/question/14660882
The percentage abundance of 6Y is 7.47%
Isotopy is the phenomenon whereby two or element have the same atomic number but different mass number due to the difference in their neutron number.
We'll begin the solving as follow:
Let A represent isotope 6Y
Let B represent isotope 7Y
From the question given above, the following data were obtained:
For isotope A (6Y):Mass of A = 6.015123 amu
Abundance of A (A₀) =…? For isotope B (7Y):Mass of B = 7.016005 amu
Abundance of B (B₀) = (100 – A₀%
Relative Atomic mass of Y = 6.9412 amu
The abundance of 6Y can be obtained as follow:
[tex]RAM = \frac{MassA * A_{0} }{100} + \frac{MassB * B_{0} }{100}\\\\6.9412 = \frac{6.015123 * A_{0}}{100} + \frac{7.016005 (100 - A_{0})}{100}\\\\6.9412 = 0.06015123 A_{0} + \frac{701.6005 - 7.016005A_{0}}{100}\\\\6.9412 = 0.06015123 A_{0} + 7.016005 - 0.07016005A_{0}[/tex]
Collect like terms
[tex]6.9412 - 7.016005 = 0.06015123A_{0} - 0.07016005A_{0}\\-0.074805 = -0.01000882A_{0}[/tex]
Divide both side by –0.0100882
[tex]A_{0} = \frac{-0.074805}{-0.01000882}\\\\[/tex]
A% = 7.47%Therefore, the abundance of 6Y is 7.47%
Learn more: https://brainly.com/question/17970374
2. Which of the following is the reason that ionization energy generally increases from left to right across the first period of the periodic table?
(A) As the atomic number increases, the electrons are harder to remove.
(B) Ionization energy increases as the atomic number increases in a period.
(C) As the atomic number increases, more electrons are
added to the atoms, thus increasing the electron-electron repulsions.
(D) As the atomic number increases, more protons in the
nucleus cause an increase in the effective nuclear charge,
making it harder to remove the electrons.
Answers
more protons in the atoms cause more attractive force that makes it harder to remove the electron hence increasing ionization energy
Answer:
The correct answer is D
Explanation:
more protons in the nucleus cause an increase in effective nuclear charge ,
how much energy is contained in 3moles of chlorine
Answers
Answer:
1 mol of cl2 contains 71 g
3 mol of cl2 will contain÷
3×71=213 g
Explanation:
There ;3
Answer:
213 g
Explanation:
multiply 3 moles by relative atomic mass of chlorine which is 35.45×2 because its two chlorines and your answer will be 213g
what is stoichiometry?
Answers
Answer:
the relationship between the relative quantities of substances taking part in a reaction or forming a compound, typically a ratio of whole integers.
Explanation:
G o o g l e
Explanation:
Stoichiometry is the calculation of reactants and products in chemical reactions in chemistry.
write on the principle and other application of a named instrument employed in unlocking frozen joints.
Answers
We have that the bone file from our research below
The is a very important tool in unlocking frozen joints by using its
Pull stroke
Serrated edges etc
And its also used in the field of dentistry.
Before we pick an instrument to focus on we first have to under stand what a frozen joints is
Frozen Joint,
Frozen Joint, which is also refereed to as adhesive capsulitis, is a situation whereby ones joints are stiff and they experience pain in the joint.
We focus on the
Bone file( principle)
It is made of a pull stroke which is designed to aid the removal of bones,they are also designed with serrated edges which are used in many different ways one of which is to smooth bones out in order to disinfect a given area
Bone file
This can also be used in the field of dentistry.
it puts into use it variant functions to make the work of a dentist easy
In conclusion
The Bone file is a very important tool in unlocking frozen joints by using its
Pull stroke
Serrated edges etc
And its also used in the field of dentistry.
For more information on this visit
https://brainly.com/question/5847359
A graduated cylinder is filled with 20ml of water. A rock is dropped in to the graduated cyclinder and the volume of water rises to 30ml
inside the graduated cylinder. The mass of the rock is 23g. What is the density of the rock?
2.3g/ml
0.77g/ml
5g/ml
1.15g/ml
Answers
Answer:
[tex]\boxed {\boxed {\sf 2.3 \ g/mL}}[/tex]
Explanation:
We are asked to find the density of a rock. Density is the substance's mass per unit volume. The formula for calculating density is:
[tex]\rho= \frac{m}{v}[/tex]
The mass of the rock is 23 grams. The volume was found using water displacement. A known amount of water was measured, the rock was added to the graduated cylinder, and the water level was recorded again. The volume is the difference between the final and initial water level. The graduated cylinder originally had 20 milliliters and the water rose to 30 milliliters.
volume = final water level - initial water level volume = 30 mL - 20 mLvolume = 10 mLNow we know the mass and the volume.
m= 23 g v= 10 mLSubstitute the values into the formula.
[tex]\rho= \frac{ 23 \ g }{30 \ mL}[/tex]
Divide.
[tex]\rho= 2.3 \ g/mL[/tex]
The density of the rock is 2.3 grams per milliliter.
Can someone help me pls, I do not know how to do this. i am trying to help a friend as well
Answers
Answer:
Your answer is 5 x 10⁵
I hope it's helps you
Answer:
[tex]thank \: you[/tex]
calculate mass of MnO2 if 1 mole of KMnO4 completely burnt. 2KMnO4 -> K2MnO4+MnO2+O2
Answers
Answer: 80 grams
Explanation:
2KMnO4 -> K2MnO4+MnO2+O2
2 moles of KMnO4 would produce 1 mole of MnO2, so 1 mole of KMnO4 would produce 0.5 moles of MnO4. The molar mass of MnO4 is 160 g/mole. 1/2 mole of KMnO4 would therefore be (160 g/mole)*(0.5 moles) = 80 grams.
What is the molecular formula of sulphuric acid and ammonia compound by criss cross method
Answers
Answer:
H2SO4 AND NH3
Explanation:
I hope it will help you
Answer:
Explanation:
H2SO4 AND NH3
Please solve these two QUESTION .
its my ASSIGNMENT
Answers
Explanation:
It is the total mass of protons and neutrons in an individual atom or isotope. Since, Atomic Mass is total mass of protons and neutrons in an individual atom or isotope and not the actual weight of an Atom.
this means that it exists in the form of isotopes and is generally in fraction.
explain dehydrogenation
Answers
Answer:
Dehydrogenation is the process by which hydrogen is removed from an organic compound to form a new chemical (e.g., to convert saturated into unsaturated compounds).
Which of the following can be referred to as a d7 ion? * O Cu4+ o Mn 4+ O O O Ni4+ O None of the above .
Answers
Transition metals are known to have incompletely filled d- orbitals. For this reason, they are commonly referred to as the d- block. Cu4+ is a d7 ion.
An ion is formed when electrons are lost from or gained in a neutral atom.
An ion is a positively or negatively charged chemical specie. Chemical species form ions by loss or gain of electrons.
An atom is neutral if it has equal number of protons and electrons. When an atom has lost electrons, it forms a positive ion.
Copper has electronic configuration; 1s2 2s2 2p6 3s2 3p6 4s2 3d9. When four electrons are lost, its electronic configuration now becomes;
1s2 2s2 2p6 3s2 3p6 3d7.
https://brainly.com/question/14283892
Iron has a density of 7.86 g/cm3. Calculate the volume (in dL) of a piece of iron having a mass of 4.59 kg .
Answers
k = 10^3
1 cm^3 = 10^-2 dL
Solutions
Density = (mass)/(volume)
Volume = (mass)/(density)
Volume = (4.59 × 10^3g)/(7.68g/cm³)
Volume = 583.97 cm³
Volume = (583.97 cm³)(10^-2 dL/1 cm³)
So volume = 5.84 dL approximately
Which methods separate a mixture according to the size of the particles?
A. distillation and evaporation
B. filtration and chromatography
C. filtration and evaporation
D. distillation and chromatography
Answers
Answer:
Only one of these methods separates compontents based on size.
The answer is filiration and chromatography.
Explanation:
9. SI base units used in chemistry include
A. kilograms, liters, inches, and moles.
B. pounds, gallons, moles, and Fahrenheit.
C. kilograms, seconds, moles, and Kelvin.
D. pounds, gallons, moles, and Celsius.
Answers
Answer:
C. kilograms, seconds, moles, and Kelvin
Given six molecules, identify the molecules with polar bonds and the molecules that are polar.CCl4, CH3Cl, H20, CO2, O2
Answers
Answer:
polar bonds- H2O, CO2, CH3CL,
The molecules that have polar bonds are CH₃Cl, and H₂O.
What are polar bonds?A polar bond is a type of covalent bond where the electron is unequally distributed.
This unequal distribution is due to the electronegativity difference of the attached atoms in the molecule.
A lewis structure of the molecule is studied to determine whether the compounds are polar and non-polar.
The molecule CCl₄: has one carbon atom at the center and the chlorine surrounds the carbon from all four sides, so even if there is a difference in the electronegativity the net dipole movement gets balanced from all four sides, so it is not a polar bond.
The molecule CH₃Cl
Similar to the CCl₄, hydrogen, and chlorine is surrounding the carbon, the three sides are hydrogen and one side is chlorine, so there is a net dipole movement and so it is a polar bond.
The molecule H₂O: The dipole movement of Hydrogen and oxygen are both in opposite directions and of different magnitude hence it will have a net dipole movement and so it is polar.
The molecule CO₂ and O₂ have net dipole movements as zero so are not polar compounds.
To know more about Polar Bonds
https://brainly.com/question/14752836
#SPJ6
Alkanes are chains of carbon atoms surrounded by hydrogen atoms. Which alkane has the weakest dispersion attractive force?
Answers
4-hydroxyl and 5- hydroxyl aldehydes exist primarily as a cyclic hemiacetals.draw the structures formed from 4-hydroxyl butanal
Answers
Take a look at your rubbing alcohol at home. What is its main composition?
Answers
Answer:
It is a mixture of denatured alcohol, water, and agents added to make the alcohol unpalatable to drink.
why does copper Cu (I) have a short lifespan
Answers
Answer:
Copper (Cu), chemical element, a reddish, extremely ductile metal of Group 11 (Ib) of the periodic table that is an unusually good conductor of electricity and heat. Copper is found in the free metallic state in nature.
Explanation:
hope this helps:)
Please help thank you (15 points)
Answers
Answer:
A. Complete one revolution around the sun